Unofficial AICP-Mordiford
Your warranty is now void. We are not responsible for bricked devices, dead SD cards, thermonuclear war or you get fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
Credits:
In the beginning, we would like to thank: AICP-mordiford for Project Treble. Then the teams of LineageOS, OmniRom, DU, SlimRoms, Resurrection Remix and AICP.
Special mention to @LorD ClockaN, @zipsnet, @eyosen, @semdoc, @Drgravy, @Hashbang173, @SpiritCroc, @wartomato, @eboye, @maxwen.
Download link: AICP-mordiford for Project Treble
It is strongly recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
Issues:
So called "Technicolor" bug when moving into or out dark mode, or when using Substratum themes, when icons and the screen got weird colors effects and stripes. Generally, you could boot into recovery and wipe Dalvik/Cache.
Sometimes, you need two cycles of booting and wiping Dalvik. This is a bug that is currently affecting almost all Treble ROMs.
Additional links:
Open GApps (Platform ARM64, Android 8.1)
Magisk
AICP-mordiford Wiki
Phh-Treble Wiki
Supported Devices: all Project Treble enabled devices should work. Some are listed here.
Please, do not post bugs/issues at the official AICP Communities because this is unofficial build.
ROM OS Version: 8.1.0 Oreo
Kernel: Lineage 4.4.147
Mordiford source
Donations: AndroPlus
September security patch?
Genkzsz11 said:
September security patch?
Click to expand...
Click to collapse
Not yet. Maybe at the weekend.
Can you please make GSI with gapps included?
tw1st3d83 said:
Can you please make GSI with gapps included?
Click to expand...
Click to collapse
Why? We won't fill everyone wishes. OpenGapps have a lot of flavors.
Technical said:
Why? We won't fill everyone wishes. OpenGapps have a lot of flavors.
Click to expand...
Click to collapse
Because there is no fully working TWRP for Huawei P10... Flashing zips is currently pain in the a**... You don't have to fill my wish, i just politely asked..
tw1st3d83 said:
Because there is no fully working TWRP for Huawei P10... Flashing zips is currently pain in the a**... You don't have to fill my wish, i just politely asked..
Click to expand...
Click to collapse
Ok, now I understand. Sorry if I looked bitter, it was not my intention. Right now, AICP team is studying if we can (or cannot) go further with it. If we can or we move to official AICP, we can consider doing it. As each system file needs to be individually built, it is just the matter of having more hours available to compile.
Technical said:
Ok, now I understand. Sorry if I looked bitter, it was not my intention. Right now, AICP team is studying if we can (or cannot) go further with it. If we can or we move to official AICP, we can consider doing it. As each system file needs to be individually built, it is just the matter of having more hours available to compile.
Click to expand...
Click to collapse
No problem man... Im so long here on XDA and i used to all kind of behavior. ? Sorry if i asked wrong question in wrong time. I'm not in a hurry and I'm not asking for any ETA, just take your time.
I used AICP on my previous devices and I got excited when i saw new thread and AICP GSI because i always got really good experience with it in the past.
tw1st3d83 said:
No problem man... Im so long here on XDA and i used to all kind of behavior. ? Sorry if i asked wrong question in wrong time. I'm not in a hurry and I'm not asking for any ETA, just take your time.
I used AICP on my previous devices and I got excited when i saw new thread and AICP GSI because i always got really good experience with it in the past.
Click to expand...
Click to collapse
Like you, I hope I get the green light to go further with AICP. If now, I'll have to drop. I don't have any other GSI ROM that is currently working in my phone, so I decided to compile. I made almost 10 tests - RR, AEX, AOSP, Carbon, crDroid, etc. - and could only manage to build AICP.
Technical said:
Like you, I hope I got the green light to go further with AICP. If now, I'll have to drop. I don't have any other GSI ROM that is currently working in my phone, so I decided to compile. I made almost 10 tests - RR, AEX, AOSP, Carbon, crDroid, etc. - and could only manage to build AICP.
Click to expand...
Click to collapse
I wish you all the best with your work... And i will test this build on Sunday when im free form work and report back with logs if i find any weird behavior.
Good luck ?
Hi,
the current status is *not* that we prohibit unofficial builds nor GSI builds.
Adding them to official is a nice thought.
The problem is the unofficial mordiford branch and that calling it AICP might make users come to our mentioned communits, Gerrit, etc. or looking at our sources that are not mordiford's one.
Just give us some time to sort things out internally please.
wartomato said:
Hi,
the current status is *not* that we prohibit unofficial builds nor GSI builds.
Adding them to official is a nice thought.
The problem is the unofficial mordiford branch and that calling it AICP might make users come to our mentioned communits, Gerrit, etc. or looking at our sources that are not mordiford's one.
Just give us some time to sort things out internally please.
Click to expand...
Click to collapse
Sure. Just let me know if I can let this thread opened or which changes I need to make to it.
My intention, with the links were to help users to get info about AICP.
tw1st3d83 said:
Because there is no fully working TWRP for Huawei P10... Flashing zips is currently pain in the a**... You don't have to fill my wish, i just politely asked..
Click to expand...
Click to collapse
Flash twrp from Honor View 10 forum, I'm using it (P10)
@Technical
1. Please add notice not to post bugs/issues at official community because this is unofficial build.
2. The source of Mordiford is here, so please add this link too.
https://github.com/mordiford
3. Treble GSI doesn't contain kernel.
AndroPlus said:
@Technical
1. Please add notice not to post bugs/issues at official community because this is unofficial build.
2. The source of Mordiford is here, so please add this link too.
https://github.com/mordiford
3. Treble GSI doesn't contain kernel.
Click to expand...
Click to collapse
can we flashing custom kernel?
---------- Post added at 04:38 AM ---------- Previous post was at 04:27 AM ----------
statusbar padding not fix on S9+..
AndroPlus said:
@Technical
1. Please add notice not to post bugs/issues at official community because this is unofficial build.
2. The source of Mordiford is here, so please add this link too.
https://github.com/mordiford
3. Treble GSI doesn't contain kernel.
Click to expand...
Click to collapse
Done.
AndroPlus said:
@Technical
1. Please add notice not to post bugs/issues at official community because this is unofficial build.
2. The source of Mordiford is here, so please add this link too.
https://github.com/mordiford
3. Treble GSI doesn't contain kernel.
Click to expand...
Click to collapse
Hi, is any differents between this and your AICP?
Works ±perfect on Mi Pad 4.
Thanks.
Notification led doesn't turn off.
F.e. after reading gmail it is still lighting.
Lovetz said:
Hi, is any differents between this and your AICP?
Click to expand...
Click to collapse
Yes. Mordiford is not AICP.
It is an independent project using or based on AICP sources.
wartomato said:
Yes. Mordiford is not AICP.
It is an independent project using or based on AICP sources.
Click to expand...
Click to collapse
Thank you. I know it. AndroPlus makes the Mordiford AICP for Shap S2. Look at his profile.
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0, which is designed to increase performance and reliability over stock Android for your device.
THIS IS UNOFFICIAL EXPERIMENTAL BUILDS WHICH CONTAINS CODE TO BE TESTED BEFORE IT IS MERGED INTO CM.
IF YOU WANT OFFICIAL BUILDS THEN CHECK BACK IN A FEW DAYS.
Official will come when the last annoying incall audio bug is squashed
Code:
#include
Your warranty is now void!
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/
Important information:
This thread is for CyanogenMod 12 opensource builds for the LG G3 (D852). The following will not be supported in this thread:
Custom Kernels
Mods
Modified system files
Xposed
Instructions:
Your device will need to be rooted and have custom recovery before proceeding. Please check your device forum for instructions.
First time flashing CyanogenMod 12 your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device
Flash CyanogenMod.
Optional: Install the Google Apps add-on package.
Already on CM12, try a dirty flash.
Reboot into recovery
Make back up <optional>
Wipe cache, system, dalvik-cache
Optional: Install the Google Apps add-on package.
Reboot
Download: CM12 EXPERIMENTAL BUILDS - Check EXPERIMENTAL folder for your device
AndroidFileHost - HERE
BasketBuild - HERE
Goo.im - HERE
Google Apps: Optional add on package that allows Google Play services such as Google Play Store and other Google Apps outside of AOSP based ROMs.
Check THIS post
Changelog:
CyanogenMod Change Log HERE
G3 Specific Change Log HERE
D850 Specific Change Log HERE
AndroidUser00110001 Change Log HERE
invsisblek Change Log HERE
GitHub - Source Code:
GitHub - CyanogenMod
GitHub - AndroidUser00110001
GitHub - invsisblek
Credits:
Thanks to all sent Paypal!!!
CyanogenMod
Thanks to @invisiblek for the work he has done on device trees.
Change Log & Other info
Changelog:
2015-01-12 - In addition to the changes below. This build is currently being built and uploaded.
g3: Get rid of ctrl_interface=/data/misc/wifi/sockets http://review.cyanogenmod.org/#/c/84746/
camera: add 3840x2160 video size http://review.cyanogenmod.org/#/c/84832/
camera: set lge-camera parameter - http://review.cyanogenmod.org/#/c/84833/
2015-01-11 - This build is currently being uploaded.
In addition to the changes from 2015-01-08
Set System prop to allow proper Imsi handling - http://review.cyanogenmod.org/#/c/84293/
selinux: Fix access to the vibrator amplification sysfs - http://review.cyanogenmod.org/#/c/84770/
Camera2: Samsung 4k Camera workaround - http://review.cyanogenmod.org/#/c/83332/
Some changes may have been merged but not in latest nightly.
2015-01-08 - This build is currently being built and will be on servers in about an hour from now.
In addition to the changelog in post #1 the following code has been merged into today's EXPERIMENTAL TEST BUILD
Adjust volume for voice-speaker
Default AT&T G3 APN
d850 cleanup
sepolicy: give radio access to tap2wake node
ProximitySensorManager: disable TapToWake while we have a prox wakelock
Bugs:
Only report bugs for UNOFFICIAL EXPERIMENTAL BUILDS pertaining to new code that is listed above in the changelog. Please report if anything is broken or if fixes actually fix something. THANKS!
For proper technique on reporting bugs:
Read THIS and THIS.
When reporting a bug be as specific as possible.
Make sure you can replicate the bug when coming from a clean install with no other apps installed besides what comes with ROM and GApps.
If you narrowed down a specific app that crashes only on CM ROM then please include app version and all info about app too.
Do not have any modifications done to the Android system besides.
It is very important to read on the proper technique to report a bug. Helps keep thread clean and makes tracking issues easier.
OFFICIAL FOR D855 please
Awesome, glad to see another D852 build! Thanks. Testing it out now!
D855 plz...
gdonanthony said:
OFFICIAL FOR D855 please
Click to expand...
Click to collapse
Kookitza said:
D855 plz...
Click to expand...
Click to collapse
Isn't there CM12 for D855?
sean222 said:
Awesome, glad to see another D852 build! Thanks. Testing it out now!
Click to expand...
Click to collapse
Let me know if it boots or not and what issues it may have please.
What's the difference between this and the other Cyanogenmod 12 for the G3 ?
AndroidUser00110001 said:
Isn't there CM12 for D855?
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g3/development/guide-how-to-build-cyanogenmod-12-t2953132
Professor Jones said:
What's the difference between this and the other Cyanogenmod 12 for the G3 ?
Click to expand...
Click to collapse
Is there CM12 for the D852?
Kookitza said:
http://forum.xda-developers.com/lg-g3/development/guide-how-to-build-cyanogenmod-12-t2953132
Click to expand...
Click to collapse
Me too If there is none than maybe I will build.
AndroidUser00110001 said:
Is there CM12 for the D852?
Click to expand...
Click to collapse
Sorry, I thought this one was for the 855. Nightly means that it gets an update every night ?
AndroidUser00110001 said:
Me too If there is none than maybe I will build.
Click to expand...
Click to collapse
There is one: http://forum.xda-developers.com/lg-g3/development/rom-cyanogenmod-12-t2945191
But it's not nightly...
Plz build for us also.. :fingers-crossed:
AndroidUser00110001 said:
Isn't there CM12 for D855?
Click to expand...
Click to collapse
we need OFFICIAL but its okay i can wait
So is this working? Anyone flash it yet?
AndroidUser00110001 said:
So is this working? Anyone flash it yet?
Click to expand...
Click to collapse
I just finished flashing it on my d852g , so far it's looking good. Wifi ok, LTE ok, bluetooth ok. I flashed gapps micro beta from the 1st post here, I'll report back later!! I gotta tell you, flashing ROM's on this device is soooo much faster that my Asus TF300T tablet
zurny said:
I just finished flashing it on my d852g , so far it's looking good. Wifi ok, LTE ok, bluetooth ok. I flash gapps micro beta from the 1st post here, I'll report back later!! I gotta tell you, flashing ROM's on this device is soooo much faster that my Asus TF300T tablet
Click to expand...
Click to collapse
Thanks! @Cuzz1369 also tested for me and all seems OK for now.
gdonanthony said:
we need OFFICIAL but its okay i can wait
Click to expand...
Click to collapse
https://goo.im/devs/androiduser00110001/ROM/D855/CM12/
Let me know in private if it boots and if anything different is broke when compared to other ROMs you have flashed.
AndroidUser00110001 said:
https://goo.im/devs/androiduser00110001/ROM/D855/CM12/
Let me know in private if it boots and if anything different is broke when compared to other ROMs you have flashed.
Click to expand...
Click to collapse
Flashing NOW!! :victory:
AndroidUser00110001 said:
https://goo.im/devs/androiduser00110001/ROM/D855/CM12/
Let me know in private if it boots and if anything different is broke when compared to other ROMs you have flashed.
Click to expand...
Click to collapse
perfect. found no bug till now
For D855 users that have asked
http://forum.xda-developers.com/lg-g3/development/rom-cyanogenmod-12-unofficial-nightly-t2973522
Now lets get back on topic in this thread
Edit: I no longer own this phone. Information in the OP may be outdated and/or incorrect. Please go to the new thread at http://forum.xda-developers.com/nexus-6/development/rom-cyanogenmod-13-nightlies-snapshots-t3363769
DISCLAIMER: I AM IN NO WAY RESPONSIBLE FOR ANY PROBLEMS ON YOUR DEVICES CAUSED BY FLASHING THESE BUILDS. THE UPSTREAM CODE AND BUILDING IS MAINTAINED BY THE CYANOGENMOD TEAM, NOT ME. I AM NOT ASSOCIATED WITH THEIR TEAM, I AM JUST THE THREAD OWNER.
It was a fun round of unofficial nightlies but the official upstream CM13 builder for shamu is active! Please use the new download links below to grab the official nightlies. Dirty flash seems to work fine if you go from my unofficial 11-29 build to the official 11-30 one. As mentioned in the first post, I will be ceasing my personal builds for now and leave it to the CM team.
Notes: CyanogenMod's stock kernel forces encryption of storage. Please download one of the third party kernels if you wish to avoid this. Also this thread assumes you have kept up to date with bootloaders and radio. At the time of writing, the latest is from the MRA58K release and can be downloaded here.
CyanogenMod 13.0 Nightlies: Download
Open GApps: Download (I recommend arm, 6.0, micro)
Changelog: CMX Changelog
Third party kernels:
Elite Kernel
Hells Core
XDA:DevDB Information
CyanogenMod 13.0, ROM for the Nexus 6
Contributors
djh816
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-11-22
Last Updated 2015-12-06
There's already a thread
http://forum.xda-developers.com/nexus-6/development/rom-cyanogenmod-13-0-android-6-0-t3231497
HipKat said:
There's already a thread
http://forum.xda-developers.com/nexus-6/development/rom-cyanogenmod-13-0-android-6-0-t3231497
Click to expand...
Click to collapse
Correct, but not nightly and as far as I can tell albinoman887 is also making fixes which implies altering of upstream code. My thread intends to serve as a purely upstream source build.
djh816 said:
Correct, but not nightly and as far as I can tell albinoman887 is also making fixes which implies altering of upstream code. My thread intends to serve as a purely upstream source build.
Click to expand...
Click to collapse
I would like to say thank you, and I believe that this ROM deserves its own thread respectfully. Since there isn't much action from that other Alpha build and if you are truly building on a nightly basis then this is much appreciated and I look forward to testing.
Thanks!
HipKat said:
There's already a thread
http://forum.xda-developers.com/nexus-6/development/rom-cyanogenmod-13-0-android-6-0-t3231497
Click to expand...
Click to collapse
A Thread with Zero Support from the Thread OP and no Nightlys , its good to see this Thread with hopfully regular updates since I currently have working in the border guarding Work and never have time for building. But what i know from @djh816 updates come many times.
Tylog said:
A Thread with Zero Support from the Thread OP and no Nightlys , its good to see this Thread with hopfully regular updates since I currently have bodybuilding in the border guarding Work and never have time for building. But what i know from @djh816 updates come many times.
Click to expand...
Click to collapse
Thanks for the support and glad to build it. Just to make sure credit is given where due, any bug fixes will be made only by the CyanogenMod team and/or any git contributors. Not sure if you'll get much support from me either but I'll certainly be glad to give any tips I find. For example, if this one specific bug rears its ugly head again, you may need to rename the SetupWizard apk inside /system/app-priv/ as that has been constantly force closing for me prior to today's build.
djh816 said:
Thanks for the support and glad to build it. Just to make sure credit is given where due, any bug fixes will be made only by the CyanogenMod team and/or any git contributors. Not sure if you'll get much support from me either but I'll certainly be glad to give any tips I find. For example, if this one specific bug rears its ugly head again, you may need to rename the SetupWizard apk inside /system/app-priv/ as that has been constantly force closing for me prior to today's build.
Click to expand...
Click to collapse
MAybe test other Gapps, i had this isues with a few cm 13 builds in combination with banks gapps , i like Banks gapps but for now not with CM13 . No support for me no problem , only 1 builds in 3 Weeks in this early stage is a problem , thats what i mean . I have at the moment zero time , i am one day in the week at home and thats time for my son and my wife
Thanks for the builds. I tried (unsuccessfully) to build my own, so this helps out a lot!
nightlies has not started yet.. looking forward..
Awesome! Thanks!
Sent from my Nexus 6 using Tapatalk
Can anyone confirm that you can write to system on this build???? Wasn't working on a build from 11.20.
Sent from my Nexus 6 using Tapatalk
mexiken said:
Can anyone confirm that you can write to system on this build???? Wasn't working on a build from 11.20.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Still is not working.. I'd love to know of a fix, if any...
mexiken said:
Can anyone confirm that you can write to system on this build???? Wasn't working on a build from 11.20.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I modified build.prop just fine.
---------- Post added at 03:10 AM ---------- Previous post was at 03:08 AM ----------
Thanks OP, for bringing this to us. Seems pretty good for such an early build. I just barely flashed it but seems great so far.
Does ad away work on this build? It wouldn't work on the previous build.
Is security disable on the ROM?
cz829x18 said:
Does ad away work on this build? It wouldn't work on the previous build.
Click to expand...
Click to collapse
Doesn't seem to just yet. As others have mentioned, no /system writing just yet.
evolishesh said:
Is security disable on the ROM?
Click to expand...
Click to collapse
Doesn't seem like it, I've tried "adb shell" with "su" after but still drops me to a "$" shell rather than "#"
Will you be adding any features or will this be more of a slim to stock cm13 builds? Also thanks for your contributions
nighthawk626 said:
Will you be adding any features or will this be more of a slim to stock cm13 builds? Also thanks for your contributions
Click to expand...
Click to collapse
No features added whatsoever If they add it upstream (included in CM) it'll be here, otherwise no. Absolutely stock. Consider me a third party buildbot slave
Very nice ROM. Just to let everyone know I just finished flashing with the Open GApps Pico and it's working fine. I know, it's bad form to use something that's not recommended.
One quick question, do we get any notification that the new nightly is ready to flash or do we just check the download site?
dlbarron said:
Very nice ROM. Just to let everyone know I just finished flashing with the Open GApps Pico and it's working fine. I know, it's bad form to use something that's not recommended.
One quick question, do we get any notification that the new nightly is ready to flash or do we just check the download site?
Click to expand...
Click to collapse
For now just the download site. I may setup something similar to the pushbullet feed Chroma has if people are interested but haven't spent the time to do it yet. New 11-23 build is up now though
Edit: Woot, looks like they fixed the system rw mounting. Hm but my test file disappeared on reboot.. maybe not yet
crpalmer said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* None
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Experience issues?
* Nightlies: bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
* M-series: file a bug in Jira.
Download Links
CyanogenMod: download.cyanogenmod.org
Google apps addon:
Download: OpenGApps (Use "arm" and "5.1")
Useful Links
Changelog
Lt03wifi wiki
Device Tree
Kernel Source
CM ROM Source
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[5.1.x] [SM-P600] CyanogenMod 12.1 Nightlies for the Note 10.1 2014 Wifi (lt03wifi), ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
Shawn5162, Shawn5162, joshndroid, Orion116
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-11-30
Last Updated 2015-11-29
Click to expand...
Click to collapse
Reserved
NOTE:
I am not blind...I can see the DL link doesn't work yet. Nightlies should begin rolling out within the next 24-48 hrs. for this device. Once that happens the link(s) will work.
Also HUGE thanks to @RaymanFX for the original CM tree for this device.
The maintainer for this device are:
@Shawn5162 (if that wasn't obvious already)
@joshndroid (that should have been obvious too cause he is BOSS)
@Orion116 (#STFUWiley )
First?
If you follow me on G+ you would see why @Shawn5162 added that hashtag[emoji23]
Sent from my SM-P600 using Tapatalk
The wiki says that our device name is "Lto3wifi", however it should be It03wifi. I look forward to trying this out once the download link works. Thanks for your hard work for our device!
---------- Post added at 10:08 PM ---------- Previous post was at 10:04 PM ----------
Orion116 said:
First?
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Read the op before posting (the second part, last line)?.
mosimchah said:
The wiki says that our device name is "Lto3wifi", however it should be It03wifi. I look forward to trying this out once the download link works. Thanks for your hard work for our device!
---------- Post added at 10:08 PM ---------- Previous post was at 10:04 PM ----------
Read the op before posting (the second part, last line)?.
Click to expand...
Click to collapse
?
Sent from my SM-P600 using Tapatalk
The nightlies should be f2fs ready I have added all the files
Sent from my Nexus 9 using Tapatalk
That's a great news to have a team working on Our Device !
Thanks a lot
when I click on the download link , I get this message " Internal Server Error " . is it only me or the download link is dead !
thanks
machhho said:
when I click on the download link , I get this message " Internal Server Error " . is it only me or the download link is dead !
thanks
Click to expand...
Click to collapse
Is it only you who can't read the second post...
machhho said:
when I click on the download link , I get this message " Internal Server Error " . is it only me or the download link is dead !
thanks
Click to expand...
Click to collapse
One word wow
Sent from my SM-P600 using Tapatalk
I'm vibrating off my seat for this! GIMME GIMME GIMME
I'am sorry for my bad formulation. I only wanted to ask why you starting to put more efforts in cm 12.1, if everyone waits for cm13.
It wasn't my Intention to be rude or ungrateful relating to your hard work on this project.
Stogie87 said:
Mhh... i am a little bit surprised, that you guys starting this project with cm 12.1 and not directly with cm 13.
Is there a reason for this?
Click to expand...
Click to collapse
Yes, there is reason. I don't have to tell you how rude this sounds. Enjoy the ROM and wait.
Sent from my SCH-R530U using Tapatalk
Stogie87 said:
I'am sorry for my bad formulation. I only wanted to ask why you starting to put more efforts in cm 12.1, if everyone waits for cm13.
It wasn't my Intention to be rude or ungrateful relating to your hard work on this project.
Click to expand...
Click to collapse
You got to remember out tablet shipped with Jellybean (4.3). It's old. We wanted to get official CM support ASAP and we had a stable cm-12.1 base. So we thought, why not get nighties going while we can. CM 13 (android 6.0) is putting up a bit of a fight right now. Once we get even a semi-stable build we will release it.
@all
Nightlies begin tonight
Enjoy and once again thanks to all the people mentioned in section post!
Shawn
Ok, i think i understand the difference. Now an official cyanogenmod Team also supporting our Rom. That sounds really good. If they could manage it, that screen mirroring will work stable on our device, i will definitively change back from touchwiz 5.1.1 rom to cm 12.1. Thanks for it.
The download is only 6mb. Is it a delta, and can it be flashed on top of Temasek's current build?
Sent from my SM-P600 using Tapatalk
Apparently the wiki was deleted. Also, flashing this won't replace twrp with the cm recovery right?
mising said:
The download is only 6mb. Is it a delta, and can it be flashed on top of Temasek's current build?
Click to expand...
Click to collapse
Seems to be just a 'recovery'
Tiemichael said:
Seems to be just a 'recovery'
Click to expand...
Click to collapse
There are actually two downloads. One is the build and the other is the recovery. The checksums are good on both, but the full builds are normally around 200 + mb and the deltas were around 50ish mb. I'm just curious as to whether or not the upload completed.
Sent from my SM-N910V using Tapatalk
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
BUG REPORTS / KNOWN ISSUES
https://jira.lineageos.org
- IR: not supported
GOT QUESTIONS?
http://wiki.lineageos.org/zl1_info.html
3rd PARTY ADDONS/MODS
While we have no issues with people using supersu/magisk/xposed/custom kernels/etc, we can't provide support for users who have them installed.
HOW TO INSTALL LINEAGEOS
- Make sure your phone is running 19S bootloader or higher
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP. (see Downloads)
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- IMPORTANT: Do a Factory Reset. (Wipe data & cache)
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot
Click to expand...
Click to collapse
HOW TO INSTALL TWRP
- Enable developer options
- Allow oem unlock
- Power off
- Hold Volume down + Power for Fastboot mode
- fastboot oem unlock-go
- fastboot flash recovery twrp.img
- fastboot boot twrp.img
Click to expand...
Click to collapse
DOWNLOADS
LineageOS:
https://download.lineageos.org/zl1
Google Apps:
http://opengapps.org/ (recommended: ARM64, 6.0, nano)
SU-Addon:
https://download.lineageos.org/extras
TWRP-Recovery:
https://drive.google.com/open?id=0B7uXK7jfW17nZGRCWmFmZU9NVWs
SOURCECODE
Device tree: https://github.com/LineageOS/android_device_leeco_zl1
Kernel: https://github.com/LineageOS/android_kernel_leeco_msm8996
HOW TO CONTRIBUTE
Use our code review system to send patches: https://review.lineageos.org
Welcome to the crew!
I was waiting for you somehow... good to see you here!
codeworkx said:
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
SOURCECODE
Device tree: https://github.com/LineageOS/android_device_leeco_zl1
Kernel: https://github.com/LineageOS/android_kernel_leeco_msm8996
I'm currently working on "cm-13.0" branch.
HOW TO CONTRIBUTE
Use our code review system to send patches: https://review.lineageos.org
TODO
- IR support
- Multi-SIM support
- Selinux rules
and much more
DOWNLOADS
TWRP-Recovery
twrp-3.0.3-20170208-zl1-codeworkx.img
Click to expand...
Click to collapse
GalaticStryder said:
I was waiting for you somehow... good to see you here!
Click to expand...
Click to collapse
Two big developpers for our Le Pro 3
I'm sooooooo happy !!! :laugh:
Welcome!! Hope the other guys working on the cm13 roms jump onboard as well. I think some of the problems you called out have already been solved by team superluminal: https://github.com/ekkilm/Slim6_device_le_le_zl1. I believe ir, cdla headphones work on that device tree.
What's new with twrp 3.0.3? I think most of us are using the Chinese modified 3.0.2, only problem i noticed was the intermittent flicker.
Things are about to go down. Seriously glad I sold off the Honor 8 in favor of this beast.
robertzas said:
Welcome!! Hope the other guys working on the cm13 roms jump onboard as well. I think some of the problems you called out have already been solved by team superluminal: https://github.com/ekkilm/Slim6_device_le_le_zl1. I believe ir, cdla headphones work on that device tree.
What's new with twrp 3.0.3? I think most of us are using the Chinese modified 3.0.2, only problem i noticed was the intermittent flicker.
Click to expand...
Click to collapse
I:m using this twrp v5 of time navigator
https://yadi.sk/d/eMOywuZY37Cc8t
What's the difference?
robertzas said:
Welcome!! Hope the other guys working on the cm13 roms jump onboard as well. I think some of the problems you called out have already been solved by team superluminal: https://github.com/ekkilm/Slim6_device_le_le_zl1. I believe ir, cdla headphones work on that device tree.
What's new with twrp 3.0.3? I think most of us are using the Chinese modified 3.0.2, only problem i noticed was the intermittent flicker.
Click to expand...
Click to collapse
Avoid modified recoveries, it's a fundamental part of the device that needs to stay as close as possible to upstream TWRP, modifications on it just sh** it up.
bayad said:
Two big developpers for our Le Pro 3
I'm sooooooo happy !!! :laugh:
Click to expand...
Click to collapse
Avoid quoting the whole O.P. - it's not a smart move. Hope we can consolidate our work soon, thanks for the "big" adjective - lol.
Yikes are you hosting the twrp img off your home computer? I'm getting like 10k, reminds me of the 14.4 baud days . If you don't mind I'll post a link to mega or something when I get it downloaded, about an hour from now at this pace
robertzas said:
Yikes are you hosting the twrp img off your home computer? I'm getting like 10k, reminds me of the 14.4 baud days . If you don't mind I'll post a link to mega or something when I get it downloaded, about an hour from now at this pace
Click to expand...
Click to collapse
There u go!
TWRP 3.0.3 by @codeworkx
https://drive.google.com/file/d/0B7mfpHgpxbtFVjdIcGttWUtaa3c/view?usp=drivesdk
Thanks for the TWRP version 3.0.3-0, finally solved the problem of the display flicker. Thank you for giving life to our Le Pro3
Gynlemon said:
Thanks for the TWRP version 3.0.3-0, finally solved the problem of the display flicker. Thank you for giving life to our Le Pro3
Click to expand...
Click to collapse
Are you having any issues with encryption on this one? Might need to format and restore my internal storage.
Ascertion said:
Are you having any issues with encryption on this one? Might need to format and restore my internal storage.
Click to expand...
Click to collapse
i just installed it, currently running darkobas's 7.1.1, didn't have any issues, just rebooted into system.
@Ascertion
robertzas said:
i just installed it, currently running darkobas's 7.1.1, didn't have any issues, just rebooted into system.
Click to expand...
Click to collapse
The same, I was on BB72, didn't have any issues.
There are many errors.
CPU Snap. 821
Battery is 4070mah
Display is 5.5 inch and the resolution of this is 1080p
And I think that the camera is 16mp
Ascertion said:
Are you having any issues with encryption on this one? Might need to format and restore my internal storage.
Click to expand...
Click to collapse
Same here with my TARS USA version.
I think that X727 USA version are encrypted by default.
Am having issues with this Twrp, it can see the sdcard, am on stock X727
bayad said:
Two big developpers for our Le Pro 3
I'm sooooooo happy !!! :laugh:
Click to expand...
Click to collapse
:fingers-crossed::fingers-crossed::good::good::good::laugh::laugh:
We should make this thread as sticky
seffmono said:
Am having issues with this Twrp, it can see the sdcard, am on stock X727
Click to expand...
Click to collapse
What do you mean? I just flashed it from fastboot (fastboot flash recovery twrpimage.img) and it seems to work fine. No more flicker, and seems solid!
I haven't backed up or restored anything yet.
slgooding said:
What do you mean? I just flashed it from fastboot (fastboot flash recovery twrpimage.img) and it seems to work fine. No more flicker, and seems solid!
I haven't backed up or restored anything yet.
Click to expand...
Click to collapse
Yes no flicker, try to install and see if you can locate the files on your sdcard and each time I reboot to TWRP it always asking to swipe to modify system even that has already been done. By the way are on stock X727? Cos am on stock ROM.
---------- Post added at 03:11 PM ---------- Previous post was at 03:07 PM ----------
Ascertion said:
Are you having any issues with encryption on this one? Might need to format and restore my internal storage.
Click to expand...
Click to collapse
Were you able to get passed the encryption issue?
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
SUPPORTED DEVICES
- LEX720 (ZL1_CN)
- LEX722 (ZL0_CN)
- LEX727 (ZL1_NA)
3rd PARTY ADDONS/MODS
While we have no issues with people using supersu/magisk/xposed/custom kernels/etc, we can't provide support for users who have them installed.
This thread is not the right place to discuss about mods/addons.
HOW TO INSTALL LINEAGEOS
- Make sure your phone is running firmware from at least 20S
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP 3.2.0 or higher.
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- RECOMMENDED: Do a factory reset! No support if you didn't!
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot
HOW TO UPDATE LINEAGEOS (15.1 -> 15.1)
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Reboot
DOWNLOADS
Lineage 15.1: https://download.lineageos.org/zl1 (Unofficial: https://sourceforge.net/projects/lineageos-on-leeco/files/lineage-15.1/)
Migration-Tools: https://androidfilehost.com/?w=files&flid=254680 (Unofficial->Official, Official->Unofficial)
SU-Addon: https://androidfilehost.com/?w=files&flid=259254
Google Apps: http://opengapps.org/
TWRP: https://sourceforge.net/projects/lineageos-on-leeco/files/twrp/
Firmware: https://sourceforge.net/projects/lineageos-on-leeco/files/firmware/
DEVELOPER RESOURCES
https://github.com/lineageos/android_device_leeco_msm8996-common
https://github.com/lineageos/android_device_leeco_zl1
https://github.com/lineageos/android_kernel_leeco_msm8996
HOW TO CONTRIBUTE?
Send your patches up for review: https://review.lineageos.org/
Nice job
keep do it guys
First off, I(we) appreciate all of your hard work to continue developing roms that make our phone worth owning!
I just had a general question. I'm assuming most/all the drivers are closed source, and that creates the ongoing issues with getting device components to work with the OS.
What is the strategy in this situation? Do you guys try to create some kind of wrapper or Just "brute force" other drivers to see if they work?
robertzas said:
First off, I(we) appreciate all of your hard work to continue developing roms that make our phone worth owning!
I just had a general question. I'm assuming most/all the drivers are closed source, and that creates the ongoing issues with getting device components to work with the OS.
What is the strategy in this situation? Do you guys try to create some kind of wrapper or Just "brute force" other drivers to see if they work?
Click to expand...
Click to collapse
Stealing as much as possible from Oneplus 3.
For everything else its pure wrapping/shimming/hacking. Like camera.
Kernel got completely rebased on top of the oreo sources from codeaurora. Took me quite some time.
codeworkx said:
.
Kernel got completely rebased on top of the oreo sources from codeaurora. Took me quite some time.
Click to expand...
Click to collapse
Wow nice job, I myself was trying to do that, I still can't get it booting with the Oreo base :laugh:
Will look at yours, thanks for your work
Sent from my LEX727 using XDA Labs
codeworkx said:
Stealing as much as possible from Oneplus 3.
For everything else its pure wrapping/shimming/hacking. Like camera.
Kernel got completely rebased on top of the oreo sources from codeaurora. Took me quite some time.
Click to expand...
Click to collapse
Appreciate the work!
Is oreo that different that blobs and such from nougat can't be used?
Greetings from brazil my friend good job, keep it up
Golf job i can be beta tester yo the Next build
Enviado desde mi LEX720 mediante Tapatalk
islandlife98 said:
Appreciate the work!
Is oreo that different that blobs and such from nougat can't be used?
Click to expand...
Click to collapse
Oreo is pretty different under the hood because of project treble. You can wrap/shim some n blobs but thats hacky.
Thanks for your work!
great @codeworkx as usual. I follow you since rom manager with your RIL and MODEM always good work. large
[No message]
codeworkx said:
Oreo is pretty different under the hood because of project treble. You can wrap/shim some n blobs but thats hacky.
Click to expand...
Click to collapse
Appreciate the insight. Thanks for your work!
thanks codeworkx,
released as soon as possible, because many users are waiting for the release
How to download？
Cola Li said:
How to download？
Click to expand...
Click to collapse
How to read?
islandlife98 said:
How to read?
Click to expand...
Click to collapse
I don't know how to download the ROM.
Cola Li said:
I don't know how to download the ROM.
Click to expand...
Click to collapse
Read the first page CAREFULLY!
Cola Li said:
I don't know how to download the ROM.
Click to expand...
Click to collapse
In big bold letters in the very first post he says "THIS IS FAR AWAY FROM BEING USABLE SO PLEASE DON'T ASK FOR BUILDS". So there is no build/download available right now.
SUMMERBREEZE said:
Read the first page CAREFULLY!
Click to expand...
Click to collapse
Thanks
---------- Post added at 01:28 PM ---------- Previous post was at 01:26 PM ----------
darkmuck said:
In big bold letters in the very first post he says "THIS IS FAR AWAY FROM BEING USABLE SO PLEASE DON'T ASK FOR BUILDS". So there is no build/download available right now.
Click to expand...
Click to collapse
Oh！Thanks