Hi,
Well, everything is pretty much in the title...
I have tried to install several GSI Treble images, but that was almost always a "No-Go" because it either did not even install, or it installed but did not boot or it booted but too many severe problems...
So, until someone releases a proper dedicated ROM for the POCO, I would like to stick to stock, but would like to be able to make a liitle more than what MIUI allows.
So I am wondering : has someone successfully installed XPosed framework on the Pocophone ?
Regards.
NexusPenguin said:
Hi,
Well, everything is pretty much in the title...
I have tried to install several GSI Treble images, but that was almost always a "No-Go" because it either did not even install, or it installed but did not boot or it booted but too many severe problems...
So, until someone releases a proper dedicated ROM for the POCO, I would like to stick to stock, but would like to be able to make a liitle more than what MIUI allows.
So I am wondering : has someone successfully installed XPosed framework on the Pocophone ?
Regards.
Click to expand...
Click to collapse
Not yet. I've tried few times, couple of builds and got the same result: stuck on boot.
SnakeByte said:
Not yet. I've tried few times, couple of builds and got the same result: stuck on boot.
Click to expand...
Click to collapse
Hi, same here stuck on boot.. What should I do to be able to boot again?
DoudouJack said:
Hi, same here stuck on boot.. What should I do to be able to boot again?
Click to expand...
Click to collapse
Reflash the rom again.
thomas140 said:
Reflash the rom again.
Click to expand...
Click to collapse
Yes you can but i actually didn't. I have twrp and i was able to reinstall the downloaded xposed in recovery and just got it to boot. Remember to clean cache / dalvik after you flash.
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
SnakeByte said:
Yes you can but i actually didn't. I have twrp and i was able to reinstall the downloaded xposed in recovery and just got it to boot. Remember to clean cache / dalvik after you flash.
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
Click to expand...
Click to collapse
Ok, that's a good news. But does xposed work after boot up? I have heard lots of people trying but failed.
Anyway, what's your Miui version? or custom roms?
DoudouJack said:
Hi, same here stuck on boot.. What should I do to be able to boot again?
Click to expand...
Click to collapse
You already have the xposed downloaded. Boot into twrp and install xposed. Somehow doing this, it actually help me boot into system. No, the xposed will not be installed but there's no more bootloop. After installing xposed from twrp remember to clear cache/dalvik and reboot into system.That worked for me without wiping anything.
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
---------- Post added at 03:31 AM ---------- Previous post was at 03:29 AM ----------
thomas140 said:
Ok, that's a good news. But does xposed work after boot up? I have heard lots of people trying but failed.
Anyway, what's your Miui version? or custom roms?
Click to expand...
Click to collapse
No, xposed will not be installed after this, i know that sounds silly but somehow installing from twrp cleared the problem i had trying to install from magisk.
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
SnakeByte said:
No, xposed will not be installed after this, i know that sounds silly but somehow installing from twrp cleared the problem i had trying to install from magisk.
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
Click to expand...
Click to collapse
That's pretty sad. I am very new on xposed and I heard there are some nice stuffs. But I heard that most of miui device doesn't support xposed?
thomas140 said:
That's pretty sad. I am very new on xposed and I heard there are some nice stuffs. But I heard that most of miui device doesn't support xposed?
Click to expand...
Click to collapse
Not sure which ones does support or not but i really miss xposed.
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
I actually booted into twrp and used mm to remove the xposed Magisk package. There is a thread on XDA that explains better (can't link it right now)
DoudouJack said:
I actually booted into twrp and used mm to remove the xposed Magisk package. There is a thread on XDA that explains better (can't link it right now)
Click to expand...
Click to collapse
And can you boot into system now?
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
SnakeByte said:
And can you boot into system now?
Click to expand...
Click to collapse
Yes everything back to normal
DoudouJack said:
Yes everything back to normal
Click to expand...
Click to collapse
Awesome :good:
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
---------- Post added at 02:26 AM ---------- Previous post was at 02:23 AM ----------
thomas140 said:
Ok, that's a good news. But does xposed work after boot up? I have heard lots of people trying but failed.
Anyway, what's your Miui version? or custom roms?
Click to expand...
Click to collapse
Forgot to mention,sorry, i'm on official beta Miui 10, rooted
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
SnakeByte said:
Awesome :good:
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
---------- Post added at 02:26 AM ---------- Previous post was at 02:23 AM ----------
Forgot to mention,sorry, i'm on official beta Miui 10, rooted
Click to expand...
Click to collapse
Ok I'm on miui 10 rooted too please give your Xposed zip that you flash on it please
Ok, because the file exceeds maximum size of 8 mb that can be uploaded as a zip, i cannot put it here, yet this is the module downloaded from Magisk manager, there's also another version you can find there (one is Xposed framework sdk 27 and the other is Xposed framework v89, so read the descriptions before installing), but remember, on my case, flashing / installing xposed did not worked, and i got stuck on boot. There's still options you can bring your phone back from bootloop, as the ones mentioned above, yet there's still a possibility to experience another issues, so please understand that i do not find myself responsible for whatever you choose to do with these files.
This xposed module can be installed in twrp or in Magisk manager.
Miui 10, rooted. after install xpose framework from magic stuck at boot loop? do i need to reflash rom or?
can flash uninstall?
maricc said:
Miui 10, rooted. after install xpose framework from magic stuck at boot loop? do i need to reflash rom or?
can flash uninstall?
Click to expand...
Click to collapse
Follow this guide for uninstalling Magisk module from recovery (METHOD 2 is EASY and STRAIGHTFORWARD): https://magiskroot.net/uninstall-magisk-module-twrp/
---------- Post added at 02:25 PM ---------- Previous post was at 02:08 PM ----------
BTW if somebody has an update for a Xposed framework working on POCO F1 I'm looking forward!
MIUI always breaks compatibility with Xposed.
I've started a GH issue for support please join there, give a thumbs up to the issue and provide logs if you can
SnakeByte said:
Not yet. I've tried few times, couple of builds and got the same result: stuck on boot.
Click to expand...
Click to collapse
By 'couple of builds' do you mean miui only or also aosp like lineageos and rremix?
Dna10 said:
By 'couple of builds' do you mean miui only or also aosp like lineageos and rremix?
Click to expand...
Click to collapse
Just Miui
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
Related
Just got new update four chrome youtube videos issue .its a small update but imp 1!
Here it is
trendchanger said:
Here it is
Click to expand...
Click to collapse
Already running since yesterday
Sent from my ONE E1003 using Tapatalk
v4a
Have any of you managed to get viper4android running after this hotfix patch? It ran beautifully up to 2.1.2 but the 2.1.3 (005) update broke it for me so I reverted. Rooted with TWRP and SU, PlayerPro and Spotify.
frmad said:
Have any of you managed to get viper4android running after this hotfix patch? It ran beautifully up to 2.1.2 but the 2.1.3 (005) update broke it for me so I reverted. Rooted with TWRP and SU, PlayerPro and Spotify.
Click to expand...
Click to collapse
I did not know that v4a was even working with 2.1.2 haha. Thank you for that. If you ever get it to work or have any updates on v4a pls do let us know
Savya said:
I did not know that v4a was even working with 2.1.2 haha. Thank you for that. If you ever get it to work or have any updates on v4a pls do let us know
Click to expand...
Click to collapse
I managed to get it working by flashing Lolliviper from this thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
At the end of the OP there's a link to LolliviperROUND which uses the external speaker for stereo audio however I haven't tried that out yet. For the standard V4A, just flash Lolliviper.zip from recovery or through Flashify and reboot. The V4A app will be in the app drawer and you just proceed as usual
Hit the thanks button if I helped! :fingers-crossed:
bijgu said:
I managed to get it working by flashing Lolliviper from this thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
At the end of the OP there's a link to LolliviperROUND which uses the external speaker for stereo audio however I haven't tried that out yet. For the standard V4A, just flash Lolliviper.zip from recovery or through Flashify and reboot. The V4A app will be in the app drawer and you just proceed as usual
Hit the thanks button if I helped! :fingers-crossed:
Click to expand...
Click to collapse
Are you sure this works on the 2.1.3 Ota?
Is there any "out of the box" way to downgrade it to 2.1.2? swiftkey keyboard seems laggy/sluttery in some way for me with the latest version 2.1.3. Have any of you noticed the same?
qcn85 said:
Is there any "out of the box" way to downgrade it to 2.1.2? swiftkey keyboard seems laggy/sluttery in some way for me with the latest version 2.1.3. Have any of you noticed the same?
Click to expand...
Click to collapse
Install the 2.1.3-X
Savya said:
Are you sure this works on the 2.1.3 Ota?
Click to expand...
Click to collapse
I've had it running since 2.1.2 and i'm on 2.1.3-X right now, no problems at all
Kéno40 said:
Install the 2.1.3-X
Click to expand...
Click to collapse
Thanks. To do so I guess I would need to root the phone, install custom recovery, etc.... right?
Funk Wizard said:
Already running since yesterday
View attachment 3564556
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
wch os u r using
n how did u changed the font
qcn85 said:
Thanks. To do so I guess I would need to root the phone, install custom recovery, etc.... right?
Click to expand...
Click to collapse
No its a system update check your cell for system update
qcn85 said:
Thanks. To do so I guess I would need to root the phone, install custom recovery, etc.... right?
Click to expand...
Click to collapse
Yes, you need to be rooted to flash v4a I suggest the kingroot then replace with supersu method.. barely took 5 minutes
Honestly speaking.. do not see a difference.. :v
Would love cyanogen for this one.. also will it give a feature to disable the quick settings?
When ever i want to flash the update its says failed to flash?am currently running 2.1.2 stock...what to do?and also how do i check if the update is available as ota?cause i did not get any notification.Thanks
rokilmr said:
When ever i want to flash the update its says failed to flash?am currently running 2.1.2 stock...what to do?and also how do i check if the update is available as ota?cause i did not get any notification.Thanks
Click to expand...
Click to collapse
The same was happening with me. I installed blueaparks twrp and it worked like charm. Install that twrp. Install 2.1.3 full rom. Then flash 2.1.3-x on it. Should work.
Sent from my ONE E1003 using Tapatalk
vinay7 said:
wch os u r using
n how did u changed the font
Click to expand...
Click to collapse
Running O2OS 2.1.3-X
Once rooted you can change or customize almost anything on the device
---------- Post added at 04:02 AM ---------- Previous post was at 04:00 AM ----------
bijgu said:
Yes, you need to be rooted to flash v4a I suggest the kingroot then replace with supersu method.. barely took 5 minutes
Click to expand...
Click to collapse
First V4A not O2OS compatible, and Second KOR never recommended, moreover u need custom recovery for V4A Flash
The normal method would also take just 5 minutes once files are downloaded and drivers installed.
---------- Post added at 04:04 AM ---------- Previous post was at 04:02 AM ----------
khandelwalgaurav said:
Honestly speaking.. do not see a difference.. :v
Would love cyanogen for this one.. also will it give a feature to disable the quick settings?
Click to expand...
Click to collapse
No lags on 2.1.3-X and is the best update till now. There are modules for disabling quick settings if you are rooted
---------- Post added at 04:23 AM ---------- Previous post was at 04:04 AM ----------
rokilmr said:
When ever i want to flash the update its says failed to flash?am currently running 2.1.2 stock...what to do?and also how do i check if the update is available as ota?cause i did not get any notification.Thanks
Click to expand...
Click to collapse
khandelwalgaurav said:
The same was happening with me. I installed blueaparks twrp and it worked like charm. Install that twrp. Install 2.1.3 full rom. Then flash 2.1.3-x on it. Should work.
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
Answered here
http://forum.xda-developers.com/devdb/project/dl/?id=15482&task=get
GUYS i have noticed BATTERY DRAIN AFTER 2.1.3.X UPDATE .....BATTERY DRAIN IS VERY MUCH NOTICEABLE!!!
trendchanger said:
GUYS i have noticed BATTERY DRAIN AFTER 2.1.3.X UPDATE .....BATTERY DRAIN IS VERY MUCH NOTICEABLE!!!
Click to expand...
Click to collapse
Let the ota settle down for a couple of battery cycles
Sent from my ONE E1003 using Tapatalk
If you guys wanna try a custom kernel finally on the p10 go down to this thread :
https://forum.xda-developers.com/p10-plus/development/kernel-hyperplus-kernel-oreo-t3753128
Install his custom kernel on my phone android 8.0 vtr-l09c432b360 and kernel is working fine.
all thanks to the original thread!
Has anybody tried this? how does it work?
martindoublem said:
Has anybody tried this? how does it work?
Click to expand...
Click to collapse
Honestly for me it's been working very good, finally the restrictions of the original kernel where you weren't able to change the clock speeds are gone. On idle is working very good very smooth no hiccups been using it and analyzing it for almost a week and I don't see anything bad or bugs so far, lost like 2% of Battery on idle for six hours which is pretty good. I would recommend it over the stock kernel. You can go to there threads on the link in the op and read more about the performance of it.
Sent from my [device_name] using XDA-Developers Legacy app
Hi...just flashed the kernel along with MTtweek app... installed lightning fast via adb
im on VTR-L29C432B360
app is nicely done,prefer dark mode
for now its base install...havent tried any mods in the tweeking app like OC ect....need to read more about that
virusdunil said:
Hi...just flashed the kernel along with MTtweek app... installed lightning fast via adb
im on VTR-L29C432B360
app is nicely done,prefer dark mode
for now its base install...havent tried any mods in the tweeking app like OC ect....need to read more about that
Click to expand...
Click to collapse
read sonicrons interactive governor's advance tweak
https://forum.xda-developers.com/showthread.php?t=3290605
Also this link will help you with some info about some things that drain you battery
https://forum.xda-developers.com/showthread.php?t=3741146
Sent from my [device_name] using XDA-Developers Legacy app
Thanks mate
Do you still pass safetynet after this is installed (with Magisk also installed)?
colthekid said:
Do you still pass safetynet after this is installed (with Magisk also installed)?
Click to expand...
Click to collapse
yes mate...all green for me
I flashed V2 Jam Master B360 on my VTR-L29C185B360 oreo and got boot loop.
This does not work.
how did you flash ?... twrp or fastboot ?
This does NOT work for VTR-L29C185 B360
Bootloop
Thanks for notifying us. Just flashed it successfully on my P10.
dmmercado23 said:
Thanks for notifying us. Just flashed it successfully on my P10.
Click to expand...
Click to collapse
what model is your P10 and what version software?
---------- Post added at 11:27 AM ---------- Previous post was at 11:27 AM ----------
virusdunil said:
how did you flash ?... twrp or fastboot ?
Click to expand...
Click to collapse
I flashed via FASTBOOT
Works fine for me on VTR-L29C636B360
mxn2000 said:
Works fine for me on VTR-L29C636B360
Click to expand...
Click to collapse
How did you flash what procedure and which file???
Hi, this Work on Huawei P10 VTR-L09 8.0.0.360(C432) ?
Not working on my VTR-L29C432B365. Not booting after flashing, freeze at bootloader screen.
BACKUP YOUR KERNEL WITH TWRP BEFORE YOU FLASH THIS!
The backup worked like a charm.
My p10 is VTR-L29 8.0.0.0360 (C636), i flashed through FASTBOOT with the B360 VERSION.
can you share the link to the file you flashed & what fastboot command you used
fatjoez said:
can you share the link to the file you flashed & what fastboot command you used
Click to expand...
Click to collapse
Download the 360 version and flash using this command fastboot flash kernel thenameofthekernel.img Hope it helps. If u wanna use magisk make sure to flash magisk first and then the kernel.
Download
https://sourceforge.net/projects/lineageos-on-leeco/files/twrp/zl1/
Changes
twrp-3.3.1-20190813-0-codeworkx-zl1.img
- upgraded to 3.3.1
- updated decryption blobs
- updated prebuilt kernel
twrp-3.3.0-0-20190427-codeworkx-zl1.img
- upgraded to android-9.0
- removed compatibility check
- removed twrp app check
- modified version string
- Fixed compatibility with older encryption variant
- fix restore of system/vendor when not using images
Sources
https://github.com/TeamWin/android_device_leeco_zl1/tree/android-9.0
https://github.com/lineageos/android_kernel_leeco_msm8996/tree/lineage-16.0
Thanks!
codeworkx said:
twrp-3.2.3-0-20180919-codeworkx-zl1.img is compatible with P.
Download
https://sourceforge.net/projects/lineageos-on-leeco/files/twrp/zl1/
Click to expand...
Click to collapse
Thanks man you really make my day with this, I can't wait to try this Rom.
Ramg77 said:
Thanks man you really make my day with this, I can't wait to try this Rom.
Click to expand...
Click to collapse
It has been removed, I guess its not finished and having it accessible was unintentional.
Did you download and install it?
tsongming said:
It has been removed, I guess its not finished and having it accessible was unintentional.
Did you download and install it?
Click to expand...
Click to collapse
It's just the folder but it's enough to know that we'll have official Lineage 16 and that's enough for me to cheer me up
Ramg77 said:
It's just the folder but it's enough to know that we'll have official Lineage 16 and that's enough for me to cheer me up
Click to expand...
Click to collapse
Ha ha, okay I was getting jealous!
---------- Post added at 03:09 PM ---------- Previous post was at 02:59 PM ----------
codeworkx said:
twrp-3.2.3-0-20180919-codeworkx-zl1.img is compatible with P.
Download
https://sourceforge.net/projects/lineageos-on-leeco/files/twrp/zl1/
Click to expand...
Click to collapse
Wow, Amazing job!
This new Twrp creates a vendor partition, without having to flash additional files. So I am assuming the the vendor partition created by a trembled rom and one created by your new version o Twrp are one in the same?
tsongming said:
Ha ha, okay I was getting jealous!
---------- Post added at 03:09 PM ---------- Previous post was at 02:59 PM ----------
Wow, Amazing job!
This new Twrp creates a vendor partition, without having to flash additional files. So I am assuming the the vendor partition created by a trembled rom and one created by your new version o Twrp are one in the same?
Click to expand...
Click to collapse
Twrp doesn't create anything.
It's the los 15.1 builds that do.
codeworkx said:
Twrp doesn't create anything.
It's the los 15.1 builds that do.
Click to expand...
Click to collapse
Yes, in my euphoric excitement, I became confused and misspoke.
I meant that there isn't a need to flash a partition files. Which of course you would had provided, if necessary. Doh!
You answered my question, Thank you.
failed to mount vendor
Ab20000 said:
failed to mount vendor
Click to expand...
Click to collapse
Restart twrp
D1stRU3T0R said:
Restart twrp
Click to expand...
Click to collapse
Still getting vendor partition error. Any other solutions?
I can mount system but not vendor. What am I doing wrong?
Vendor is only created if you flash LineageOS 15.1 or LineageOS 16.0. Do that and restart.
I have a question to which I have never received an answer. but how do I remove the annoying unlocking every time I go into recovery. I always have to turn off and turn on the screen.
Inviato dal mio LEX720 utilizzando Tapatalk
just to confirm, 3.2.3 is the latest twrp for the x720? Cause on the twrp app, it keeps saying failed to fetch data, been saying that for weeks now
GWARslave119 said:
just to confirm, 3.2.3 is the latest twrp for the x720? Cause on the twrp app, it keeps saying failed to fetch data, been saying that for weeks now
Click to expand...
Click to collapse
If you are using this recommended 9/19 Twrp, remember that its unofficial and that could be the reason you are getting the fetch error.
In my experience, that app works sometimes and sometimes it doesn't. But you should still be able to backups from within the OS.
tsongming said:
If you are using this recommended 9/19 Twrp, remember that its unofficial and that could be the reason you are getting the fetch error.
In my experience, that app works sometimes and sometimes it doesn't. But you should still be able to backups from within the OS.
Click to expand...
Click to collapse
Oh im not using this one, im still on 3.2.2
GWARslave119 said:
Oh im not using this one, im still on 3.2.2
Click to expand...
Click to collapse
If you are using trebled Oreo or Pie , you need to be on this TWRP. ( 9/19) If you are using anything else : use this Twrp: https://twrp.me/leeco/leecolepro3.html
The syncing part of that app rarely works. Regardless, of what you have had installed. To the best of my recollection, I was able to get it to work maybe 2 or 3 times over a two year period using every rom that came available. On the other hand, the Gapps app works
tsongming said:
If you are using trebled Oreo or Pie , you need to be on this TWRP. ( 9/19) If you are using anything else : use this Twrp: https://twrp.me/leeco/leecolepro3.html
The syncing part of that app rarely works. Regardless, of what you have had installed. To the best of my recollection, I was able to get it to work maybe 2 or 3 times over a two year period using every rom that came available. On the other hand, the Gapps app works
Click to expand...
Click to collapse
i dont think im on trebled oreo, not quite sure what that is though ive seen it around ;p im using the unsushifued bootlegger rom right now.
GWARslave119 said:
i dont think im on trebled oreo, not quite sure what that is though ive seen it around ;p im using the unsushifued bootlegger rom right now.
Click to expand...
Click to collapse
Okay, that is treble. You need to use this Twrp
I you go to the bottom of the Bootlegger Op (The Original Post aka first page) You will see that I recommended using this version of TWRP
tsongming said:
Okay, that is treble. You need to use this Twrp
I you go to the bottom of the Bootlegger Op (The Original Post aka first page) You will see that I recommended using this version of TWRP
Click to expand...
Click to collapse
alrighty i flashed it
11.0.4.0
https://sourceforge.net/projects/xi...Note7Pro_V11.0.4.0.PFHCNXM_v11-9.zip/download
https://androidfilehost.com/?fid=4349826312261619448
11.0.3.0
https://sourceforge.net/projects/xi...Note7Pro_V11.0.3.0.PFHCNXM_v11-9.zip/download
https://androidfilehost.com/?fid=1899786940962604974
New links will be posted here.
Dirty flash over lastest MIUI 10 stable possible?
---------- Post added at 05:32 AM ---------- Previous post was at 05:21 AM ----------
After checking Xiaomi.EU it seems this version still doesn't have Widevine L1 yet. A little disappointing
11.0.3.0 reuploaded: SafetyNet fixed.
Camerado said:
11.0.3.0 reuploaded: SafetyNet fixed.
Click to expand...
Click to collapse
Which link that pass safetynet ?
---------- Post added at 12:57 AM ---------- Previous post was at 12:08 AM ----------
I've tried both link.
Nope. Still doesn't pass the safetynet..
TheMrBinary said:
Which link that pass safetynet ?
---------- Post added at 12:57 AM ---------- Previous post was at 12:08 AM ----------
I've tried both link.
Nope. Still doesn't pass the safetynet..
Click to expand...
Click to collapse
Should i dirty flash over stabel xiaomi miui 10? May u please sir give the steps.
Sent from my Redmi Note 7 Pro using XDA Labs
hackermssharma said:
Should i dirty flash over stabel xiaomi miui 10? May u please sir give the steps.
Sent from my Redmi Note 7 Pro using XDA Labs
Click to expand...
Click to collapse
I use the Updater app
TheMrBinary said:
I use the Updater app
Click to expand...
Click to collapse
Did u wipe anything?
Sent from my Redmi Note 7 Pro using XDA Labs
I am getting this error when i click on check button
Sent from my Redmi Note 7 Pro using XDA Labs
hackermssharma said:
I am getting this error when i click on check button
Sent from my Redmi Note 7 Pro using XDA Labs
Click to expand...
Click to collapse
Download the update file and put it in your phone.
1. Open updater app
2. Press the "three dots" at the upper corner.
3. Choose update package
4. Find the update file
5. Let it do the magic.
6. Enjoy MIUI 11 stable
TheMrBinary said:
Download the update file and put it in your phone.
1. Open updater app
2. Press the "three dots" at the upper corner.
3. Choose update package
4. Find the update file
5. Let it do the magic.
6. Enjoy MIUI 11 stable
Click to expand...
Click to collapse
Thanks a lot mate ??
Sent from my Redmi Note 7 Pro using XDA Labs
Can I install from miui 10 global with boot loader locked and not rooted?
ashwinonm said:
Can I install from miui 10 global with boot loader locked and not rooted?
Click to expand...
Click to collapse
No.
You need custom recovery (ie. TWRP peter's) to install xiaomi.eu
You need bootloader unlocked to install TWRP.
I can not boot this rom. After installing it keeps boot looping.
Here is the link to the related discussion
https://forum.xda-developers.com/showthread.php?p=80516339
Sent from my MI 6 using Tapatalk
newtonc said:
I can not boot this rom. After installing it keeps boot looping.
Here is the link to the related discussion
https://forum.xda-developers.com/showthread.php?p=80516339
Sent from my MI 6 using Tapatalk
Click to expand...
Click to collapse
If you from different ROM (china/india/global/custom ROM)
You need to format via custom recovery first. Then flash xiaomi.EU.
TheMrBinary said:
If you from different ROM (china/india/global/custom ROM)
You need to format via custom recovery first. Then flash xiaomi.EU.
Click to expand...
Click to collapse
I already did all that. Miui Eu 9.9.26 works, stable 11 or 9.10.140 doesn't.
Sent from my MI 6 using Tapatalk
Any feedback from users who have installed? How is the MIUI 11 Stable version?
PS: @newtonc Just now I installed the latest xiaomi.eu MIUI 11 Stable - fresh format but used Peter's TWRP. All good for me! FYI
mGforCe said:
Any feedback from users who have installed? How is the MIUI 11 Stable version?
PS: @newtonc Just now I installed the latest xiaomi.eu MIUI 11 Stable - fresh format but used Peter's TWRP. All good for me! FYI
Click to expand...
Click to collapse
when you say fresh format, have you FORMATTED data (not just wiped). Here, I dirty flashed it and it works. But i cant use netflix because play store is not certified. is it certified for you_?
does it supports ota updates for this rom only???
newtonc said:
when you say fresh format, have you FORMATTED data (not just wiped). Here, I dirty flashed it and it works. But i cant use netflix because play store is not certified. is it certified for you_?
Click to expand...
Click to collapse
Yes - did format data.
No - playstore is not certified.
Can you check this command on terminal and paste what you see as device fingerprint?
getprop ro.build.fingerprint
Cts profile is not passing so i have to use a magisk module to change fingerprint of device. Now play sotre as well as magisk cts profile passed that is device is now certified.
Sent from my Redmi Note 7 Pro using XDA Labs
My TWRP keeps messing up with my battery percentage can someone please give me the link to the latest stable TWRP for our beloved poco :fingers-crossed:?
timmy6 said:
My TWRP keeps messing up with my battery percentage can someone please give me the link to the latest stable TWRP for our beloved poco :fingers-crossed:?
Click to expand...
Click to collapse
Just restart the phone from home screen. It will fix your battery percentage. Twrp for poco hasn't been updated since 2019. So there are couple of unofficial beta twrp recoveries. You can try this one. I am using it. It gets the work done.
MOD EDIT: Link Removed
callmebutcher101 said:
Just restart the phone from home screen. It will fix your battery percentage. Twrp for poco hasn't been updated since 2019. So there are couple of unofficial beta twrp recoveries. You can try this one. I am using it. It gets the work done.
MOD EDIT: Link Removed
Click to expand...
Click to collapse
Thank man really appreciate it !
But this website seems sketchy
timmy6 said:
Thank man really appreciate it !
But this website seems sketchy
Click to expand...
Click to collapse
This website is not sketchy but it contains some good Open Source and free projects.
timmy6 said:
My TWRP keeps messing up with my battery percentage can someone please give me the link to the latest stable TWRP for our beloved poco :fingers-crossed:?
Click to expand...
Click to collapse
Using official 3.3 twrp, mine works fine. If problem persists try reflashing TWRP. It should still retain all your data
mecoromeo said:
Using official 3.3 twrp, mine works fine. If problem persists try reflashing TWRP. It should still retain all your data
Click to expand...
Click to collapse
The one from 2019? Does encryption-decryption work?
timmy6 said:
The one from 2019? Does encryption-decryption work?
Click to expand...
Click to collapse
Yeah the one from may. Version 3.3.0
No problems with mine
---------- Post added at 08:11 PM ---------- Previous post was at 08:02 PM ----------
timmy6 said:
The one from 2019? Does encryption-decryption work?
Click to expand...
Click to collapse
Mine works fine. If you are still getting issues try checking the link below. Like me, there are others who used official twrp and decrypted the device. There are other suggestions here in case it doesn't work for you
https://forum.xda-developers.com/poco-f1/help/password-recoveries-twrp-3-3-0-0-t4042129/page2