Hi, I want to install a stock official google release of android 7.0 onto the Doopro P2 Pro. If I cant do that I want to at least root the phone, the reason being that this phone is pretty well built, but the software is just bloatware, it barely qualifies as android, it also has ads. I successfully got into bootloader/fastboot, and I checked that it is unlocked via windows cmd "fastboot oem device-info". I also successfully flashed some kind of twrp into it with "fastboot flash recovery "C:\Users\...\twrp.img"".
The only problem is that this phone only has options if I boot it into recovery mode, but only a logo if I am in fastboot mode. I tried using "fastboot boot "C:\Users...\twrp.img"", which returns a remote: dtb not found error.
Now when I try to boot into recovery mode (adb reboot recovery), it just loads the bootloader which only has a logo as I mentioned earlier. The OS still boots up fine. The only problem I can think of is that I am trying to boot a TWRP that is not compatible with the device / android (6.0.1). Please somebody help me!
gabor6505 said:
Hi, I want to install a stock official google release of android 7.0 onto the Doopro P2 Pro. If I cant do that I want to at least root the phone, the reason being that this phone is pretty well built, but the software is just bloatware, it barely qualifies as android, it also has ads. I successfully got into bootloader/fastboot, and I checked that it is unlocked via windows cmd "fastboot oem device-info". I also successfully flashed some kind of twrp into it with "fastboot flash recovery "C:\Users\...\twrp.img"".
The only problem is that this phone only has options if I boot it into recovery mode, but only a logo if I am in fastboot mode. I tried using "fastboot boot "C:\Users...\twrp.img"", which returns a remote: dtb not found error.
Now when I try to boot into recovery mode (adb reboot recovery), it just loads the bootloader which only has a logo as I mentioned earlier. The OS still boots up fine. The only problem I can think of is that I am trying to boot a TWRP that is not compatible with the device / android (6.0.1). Please somebody help me!
Click to expand...
Click to collapse
hi, same for me, any news, did you found any way to root it or any stock firmware rom source maybe?
Hi !
I had rooted my Honor 9 flashing ramdisk file through fastboot so I unlocked the bootloader and FRP and everything was fine. I was on Oreo. Now I wanted to go back to a stock unrooted Oreo phone. I used "fastboot oem relock
Code:
" but now my phone doesn't boot anymore.I didn't flash any unroot file. When I turn it on I have a Google logo and then Huawei eRecovery but it doesn't work. The phone now says in fastboot "Phone Relocked" and "FRP Lock". I'm used to flash samsung phones but I'm a bit confused with Honor/Huawei.
Any help please ?
nobody ?
closed. the phone is now dead...RIP
Hello recently an automatic firmware update happened on my phone , after the update has finished my phone is now stucked on the EMUI after booting up. My phone has bootloader unlocked
update:
i flashed the stock rom using adb & fastboot
i flashed these
ramdisk.img
kernel.img
recovery-ramdis.img
system.img
wiped / format the data and the cache partition
Was all succcess but now im getting stucked on the ""your device has been unlocked and can't be trusted" screen
pls send help
upppppppp pla help
im still getting stucked please help
up i need help please
bumpy uppp
up please help
then try to go to erecovery by pressing volume up while the your device has been unlocked and can't be trusted
i can help if u like remotly
Did you find a solution
anonpurged09 said:
update:
i flashed the stock rom using adb & fastboot
i flashed these
ramdisk.img
kernel.img
recovery-ramdis.img
system.img
wiped / format the data and the cache partition
Was all succcess but now im getting stucked on the ""your device has been unlocked and can't be trusted" screen
pls send help
Click to expand...
Click to collapse
install minimal adb and fastboot tool (for quickness) on window's computer
Put your phone back into fastboot mode (insert usb with mobile switched off whilst holding the volume up button and plugged into your laptop)
Check your bootloader's status with this command fastboot oem device-info And then go back and lock your bootloader again using the fastboot oem lock command then restart your phone in recovery mode and factory reset it .....you may have to put your phone's serial number at the end off fastboot oem lock ************* you can get it using the fastboot devices command,just copy and paste serial " at end of your command then use the fastboot oem device-info command again to check that you have been successful.....Failing that you might have to re-flash and try a fresh download of firmware stock rom from a different source as it might be corrupted
Good luck.
Hi,
My ANE-LX1 seems to be stuck in a bootloop.
I was trying to install lineageos 16 (official) or 18 (unofficial).
First I used potatonv to unlock the bootloader.
This seemed to work OK, but in fastboot mode it said bootloader unlocked (red), FRP locked (green).
Maybe this is the problem, I'm not sure why FRP wasn't reset.
I flashed the latest TWRP 3.5.0 for anne from their site.
I was roughly following the instructions here: https://wiki.lineageos.org/devices/anne/install
I did "fastboot flash recovery-ramdisk twrp...".
I was able to boot to TWRP and then I did a wipe. This got to a certain point and seemed to hang.
Eventually I rebooted and now the phone just boots to TWRP initial screen and sits there. I can't get to fastboot mode or stock recovery.
ADB sees the phone in this mode but commands time out.
If I power off the phone and turn it on again I get the "your device is unlocked" screen but then it goes straight to TWRP.
I left the battery run out and when I booted the "your device is unlocked" screen had the option to press a key to boot recovery but if I press nothing it tries to boot and nothing happens, if I press the volume key it goes to TWRP and again just hangs on the initial screen.
In hindsight I probably should have left the stock recovery as the instructions on openkirin and the ROMs forum say it is required.
It's been a while since I played around with custom ROMs, since before treble etc. so I've probably done something wrong.
Any advice is greatly appreciated!
Thanks
jcul said:
I've probably done something wrong.
Click to expand...
Click to collapse
Yes, you have installed wrong TWRP (version 3.4.0.x and 3.5.0.x is not fully compatible with our device and it's strongly not recommended do 'wipe data' runnig stock ROM , it may brick the phone).
- Try in fastboot mode run commands
fastboot erase userdata
fastboot reboot
- Try boot into Recovery update mode (turn off, then press and hold Power + both Volume buttons) and post the result.
Ya I spotted the 3.4.0 thread here just after I had flashed the latest.
I had followed the link from the lineageOS wiki and just installed the latest...
I can't seem to boot into bootloader / recovery update mode.
No matter what I do volume up / down / both I get to teamwin initial screen and it hangs there.
I get the "can't be trusted" screen I posted above when the phone turns on and then it goes to TWRP.
I think when the battery is completely drained I get the "can't be trusted" with "press volume up to boot erecovery" message so maybe I need to wait until it is in that mode and then press both volume buttons.
So I don't get fastboot access but I actually have adb access.
$ adb devices
List of devices attached
89U7N18530003337 recovery
$ adb shell
anne:/ # df
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 1852668 68212 1784456 4% /
tmpfs 1912668 296 1912372 1% /dev
tmpfs 1912668 0 1912668 0% /mnt
tmpfs 1912668 4 1912664 1% /tmp
/dev/block/mmcblk0p43 112624 104 112520 1% /cache
Though if I run:
$ adb reboot bootloader
It just hangs.
jcul said:
So I don't get fastboot access
Click to expand...
Click to collapse
Install on PC "Minimal ADB and fastboot" tool, open it, turn off phone, hold Volume down and connect phone to the PC. It should work.
-Alf- said:
Install on PC "Minimal ADB and fastboot" tool, open it, turn off phone, hold Volume down and connect phone to the PC. It should work.
Click to expand...
Click to collapse
Sorry I mean I can't get the phone into bootloader mode. I do have ADB and fastboot installed.
The phone just goes straight to TWRP.
"fastboot devices" doesn't show anything. "adb devices" shows the phone once it's on the twrp screen.
jcul said:
Sorry I mean I can't get the phone into bootloader mode. I do have ADB and fastboot installed.
The phone just goes straight to TWRP.
"fastboot devices" doesn't show anything. "adb devices" shows the phone once it's on the twrp screen.
Click to expand...
Click to collapse
try one more trick - unplug phone, run command fastboot reboot (or fastboot oem get-build-number ) , ENTER. You will see a message Waiting for any device. Then use this method
-Alf- said:
turn off phone, hold Volume down and connect phone to the PC
Click to expand...
Click to collapse
Last chance - try get the phone into bootloader mode using Huawei Multi-Tool.
If it's just a software problem, dc-phoenix and the test point method (paid service) will help you. But it is possible that the emmc memory has died or the motherboard is damaged.
Thanks for the help with this.
I managed to get the device into bootloader mode eventually.
Code:
$ sudo fastboot oem get-build-number
(bootloader) :ANE-LX1 9.1.0.360(IRLC368E6R1P6)
OKAY [ 0.005s]
Finished. Total time: 0.005s
$ sudo fastboot erase userdata
Erasing 'userdata' (bootloader) success to erase cryypt info in oeminfo
OKAY [ 1.801s]
Finished. Total time: 1.818s
$ sudo fastboot reboot
Rebooting OKAY [ 0.024s]
Finished. Total time: 0.225s
I did the erase userdata and after that I was able to get into eRecovery like you suggested by holding both volume buttons.
I thought that would have been wiped after I flashed with TWRP but I guess not.
In eRecovery it said "Data Partition severely corrupted. To reset your device, please format the data partition", so I did that and now I'm back on the eRecovery screen.
I attached some images.
Should I be worried that the bootloader screen shows "FRP Lock"?
My goal is to install LineageOS so now that I've done a reset using the stock eRecovery should I be good to follow the steps here? Or do I need to first flash a stock recovery to the recovery-ramdisk over the TWRP I flashed before?
LOSQ/LiR - LineageOS 17.1/18.1-UNOFFICIAL-GSI
For those who want to try LineageOS 17.1/18.1-UNOFFICIAL-GSI . IMO stable enough to be used as your daily driver. LOSQ/LiR is not developed nor maintained by me! Credits: @eremitein Requirements: basically full stock EMUI 9.1, with stock...
forum.xda-developers.com
Thanks again
jcul said:
I was able to get into eRecovery like you suggested by holding both volume buttons.
I thought that would have been wiped after I flashed with TWRP but I guess not.
Click to expand...
Click to collapse
First of all - in Huawei devices we have two recoveries - Recovery and eRecovery.
- If I'm not mistaken, you have still TWRP on board (instead Recovery), can you boot into TWRP? (it's important)
- In eRecovery menu there's an option "Download latest version and recovery". Have you tried this method?
With FRP lock you cannot flash partitions from fastboot.
And yes, data partition is really corrupted ...
Unfortunately, there's no Service ROM for your build number, your phone is Single SIM, 'Three network' Ireland (correct me if I'm wrong), so you cannot restore your phone via dload method.
Hi,
Yes I selected the "download latest version and recovery" and it seemed to flash successfully.
I can now boot the device normally into the original stock 3 Ireland image.
Unfortunately, there's no Service ROM for your build number, your phone is Single SIM, 'Three network' Ireland (correct me if I'm wrong), so you cannot restore your phone via dload method.
Click to expand...
Click to collapse
Yes that's exactly right.
Is it possible to use a different single SIM variant stock image?
Now volume up takes me to stock EMUI recovery, with options to wipe etc.
Volume up + down takes me to EMUI saying update failed or something like that.
Volume down just boots normally, not to fastboot mode (do I need to have a USB cable inserted to get fastboot mode or is it somehow broken?).
I can get into fastboot by doing "adb reboot bootloader".
So now I have bootloader locked and FRP locked again.
Should I use potatonv again to unlock the bootloader and then try flash a custom ROM after doing a reset with the stock recovery?
Ideally I'd like to have a ROM with optional / hidden root so I can use banking apps but also have root access, but if I have to lose banking apps to have root then I'm OK with that.
jcul said:
Is it possible to use a different single SIM variant stock image
Click to expand...
Click to collapse
yes, but you have to rebrand the phone to another region, e.g. eu C432 - replace oeminfo and flash eu firmware (you get dual SIM because oeminfo for single is not available). The process will lock the BL again.
jcul said:
not to fastboot mode (do I need to have a USB cable inserted to get fastboot mode or is it somehow broken?).
Click to expand...
Click to collapse
Turn off the phone, hold Volume Down and connect to PC.
jcul said:
Should I use potatonv again to unlock the bootloader and then try flash a custom ROM after doing a reset with the stock recovery?
Click to expand...
Click to collapse
Yes, you can,
each bootloader code is permanent, it wont expire.
jcul said:
Ideally I'd like to have a ROM with optional / hidden root so I can use banking apps but also have root access,
Click to expand...
Click to collapse
Try CAOS
Thanks.
So I think this is what I will do.
1. Unlock bootloader using potatonv again (hopefully this time it will reset FRP Lock too as I have no google account on the phone this time).
2. Root phone using magisk so I can change oeminfo.
3. Flash oeminfo following this guide.
4. Download and flash ANE-LX1C432E5R1P7B132 from here using fastboot and do factory reset.
5. Flash CAOS rom over stock 9.1.0.132.
jcul said:
Thanks.
So I think this is what I will do.
1. Unlock bootloader using potatonv again (hopefully this time it will reset FRP Lock too as I have no google account on the phone this time).
2. Root phone using magisk so I can change oeminfo.
3. Flash oeminfo following this guide.
4. Download and flash ANE-LX1C432E5R1P7B132 from here using fastboot and do factory reset.
5. Flash CAOS rom over stock 9.1.0.132.
Click to expand...
Click to collapse
I've never done a rebrand running EMUI 9.1, I'm not sure if it works. Try downgrade to Oreo via HiSuite, then follow this tutorial - variant C/.
jcul said:
hopefully this time it will reset FRP Lock too as I have no google account on the phone this time
Click to expand...
Click to collapse
You can FRP unlock manually in Developer options - "Enable OEM unlock"
jcul said:
. Download and flash ANE-LX1C432E5R1P7B132 from here using fastboot and
Click to expand...
Click to collapse
Use only service ROM and dload method.
I decided to go straight for Lineage OS 18 unofficial.
Works great.
If I ever need to go back to stock then I guess I will have to go the rebrand route.
Thanks again for the help.
jcul said:
I decided to go straight for Lineage OS 18 unofficial.
Works great.
Click to expand...
Click to collapse
Yes, one of the best custom ROMs for hi6250 devices . Now fully compatible with Magisk !
jcul said:
Thanks again for the help.
Click to expand...
Click to collapse
No problem.
Hey guys I'm not able to boot into fastboot mode it' is
i have the same error in fastboot but fastboot working fine, i have only trouble booting to stock recovery. i have tried flashing stock recovery , wipe/clear/hard reset nothing worked. recovery mode is still messed up. please let me know if you found any solution.
EDIT: do not re-lock bootloader in this condition phone will be bricked, (boot/recovery img correpted error message).