Hi! I found a way, to install J730FM official stock Oreo ROM, on J730F.
Everything working fine. Sorry for my little bit bad english.
Code:
I am not responsible for bricked devices and other things, created after using this flahing method.
a) Flash Oreo 8.1.0 (SER) stock ROM using Odin, without bootloader file, but use PIT file from attached files.
- https://www.sammobile.com/firmwares/galaxy-j7/SM-J730FM/SER/download/J730FMXXU4BRI3/234618/
- View attachment J7Y17LTE_EUR_OPEN.zip
b) In the end of flashing, you get a error with radio (or something similar). Just unplug USB cable, and turn off the phone using combination buttons (VOL- + POW) - press both for many seconds. Now turn the device into download mode once time more.
b) Flash custom recovery using odin. Recommended a Mohi's1117 TWRP from link below.
https://forum.xda-developers.com/galaxy-j7-2017/development/recovery-t-r-p-3-2-1-0-t3751717
c) Okay. After flashing, just restart phone, and let boot to system. Everything should working. If not, just flash ROM from link below, and try everything from this tutorial again.
https://forum.xda-developers.com/galaxy-j7-2017/development/rom-j5-pro-rom-j730xx-t3838073
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
?
EyuphanKundakci said:
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
?
Click to expand...
Click to collapse
You miss PIT file. Just make every steps from tutorial.
Steku1997 said:
You miss PIT file. Just make every steps from tutorial.
Click to expand...
Click to collapse
I placed odin pit file but same error.
EyuphanKundakci said:
I placed odin pit file but same error.
Click to expand...
Click to collapse
What showing your J7 screen?
Steku1997 said:
What showing your J7 screen?
Click to expand...
Click to collapse
Red text: SECURE CHECK FAIL : (PIT)
This pit file for nougat?
EyuphanKundakci said:
Red text: SECURE CHECK FAIL : (PIT)
This pit file for nougat?
Click to expand...
Click to collapse
For all. Nougat and Oreo. Try to use other version of Odin.
Steku1997 said:
For all. Nougat and Oreo. Try to use other version of Odin.
Click to expand...
Click to collapse
I try odin3 v3.13 now: SECURE CHECK FAIL : (BOOTLOADER)
EyuphanKundakci said:
I try odin3 v3.13 now: SECURE CHECK FAIL : (BOOTLOADER)
Click to expand...
Click to collapse
Uncheck BL option in location with bootloader. Or don't select a BL software file.
I am installed but my screen is fake amoled screen touch screen is not working ((((((((((((((((((
EyuphanKundakci said:
I am installed but my screen is fake amoled screen touch screen is not working ((((((((((((((((((
Click to expand...
Click to collapse
So, then try last step. And remember, this tutorial is only for J730F/DS.
Are you sure it's ok to flash FM on F?
ion1s said:
Are you sure it's ok to flash FM on F?
Click to expand...
Click to collapse
Yes, i'm trying. Actually i'm using this ROM on my phone. Working pretty good.
does someone have the oreo firmware somewhere else than sammobile ? it's terribly slow !
imaGine00 said:
does someone have the oreo firmware somewhere else than sammobile ? it's terribly slow !
Click to expand...
Click to collapse
https://drive.google.com/file/d/172lo5GTJ5oHf9V9HieoxEvM9nryTsyYR/view
Thanks, ezer90!
Steku1997 said:
So, then try last step. And remember, this tutorial is only for J730F/DS.
Click to expand...
Click to collapse
I tried other 8.1 rom but same problem My touch screen is not answering. Because amoled screen is fake. WTF SAMSUNG????
Ok, I confirm this guide is good. I already flashed it, without radio error or something *I flashed only AP and CSC.
need a root for this?
Easy way to get pit file for J7 pro
Steku1997 said:
For all. Nougat and Oreo. Try to use other version of Odin.
Click to expand...
Click to collapse
here is the simple way to get pit file ( i have also got) from firmware package
1) extract firmware package
2) find package with name " CSC_ODD_J730GMODD3ARF3_CL13775238_QB18498802_REV00_user_low_ship.tar.md5"
3) rename it CSC.tar
4) extract it and you will get pit fine inside the package
WAVESKLR said:
need a root for this?
Click to expand...
Click to collapse
Nope.
Related
I have G925S model and 2G network not work stable because the stock rom only have 3G and LTE option.
So someone have G925F model can use this software and backup Radio image, please?
https://play.google.com/store/apps/details?id=ma.wanam.partitions
Thanks.
Bump
you could also download your firmware..rename the tar.md5 to tar and extract it..voila
Odin don't let me flash G925F modem. Failed everytime. I think bootloader not accept another baseband.
kakahoho said:
Odin don't let me flash G925F modem. Failed everytime. I think bootloader not accept another baseband.
Click to expand...
Click to collapse
also not if you repack the modem with the tool posted in development thread..?
I tried repack modem.bin to tar.md5 and failed too.
kakahoho said:
I tried repack modem.bin to tar.md5 and failed too.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3101195
by using this tool works..do it with the multiple file option..
Alex-V said:
http://forum.xda-developers.com/showthread.php?t=3101195
by using this tool works..do it with the multiple file option..
Click to expand...
Click to collapse
I can't flash G925F's modem via Odin. Even with SkipSoft ToolKit you mention above. I think G925S carrier bootloader prevent flash another radio/modem.
is there a fastboot method for Samsung..? that was good on HTC
Alex-V said:
is there a fastboot method for Samsung..? that was good on HTC
Click to expand...
Click to collapse
Do you know another flash modem.bin without Odin? I tried Flashfire but not successful.
those 2 I think..not sure about fastboot using Adb..
not Googled yet if there's fastboot also with Samsung..
I need help in the problem of non-completion of the installation of the firmware
phone Galaxy S6 Edge Model SM-G925I
Root was rooting , When you attempt the firmware installation is not completed See attached photo .
The file was the inauguration of linkage here and then returned to life, but so far the inauguration of the firmware can not be the same problem .
http://forum.xda-developers.com/galaxy-s6-edge/orig-development/cf-auto-root-t3056631/page16
Thank you pending resolution of the problem
you need to have a pit file that matches you device..or you need to have the firmware file your phone comes with..
Alex-V said:
you need to have a pit file that matches you device..or you need to have the firmware file your phone comes with..
Click to expand...
Click to collapse
Yes it is true I read it but how do I get the file Pit ..? , thank you very much
Abdulaziz7888 said:
Yes it is true I read it but how do I get the file Pit ..? , thank you very much
Click to expand...
Click to collapse
now..comes the part that is not simple..there non online..you must get it from your phone..the best is a rooted phone..there are some tutorials and tools online..simple google search it..I tried but was tired with my non rooted phone..
BTW..what you can try is to extract the firmware and make your own with only system and kernel firmware..look in the general thread for new Vodafone firmware..I will try that also...it should bring a few updates..
Alex-V said:
you need to have a pit file that matches you device..or you need to have the firmware file your phone comes with..
Click to expand...
Click to collapse
Alex-V said:
now..comes the part that is not simple..there non online..you must get it from your phone..the best is a rooted phone..there are some tutorials and tools online..simple google search it..I tried but was tired with my non rooted phone..
BTW..what you can try is to extract the firmware and make your own with only system and kernel firmware..look in the general thread for new Vodafone firmware..I will try that also...it should bring a few updates..
Click to expand...
Click to collapse
Sorry I do not know how to extract a file from the firmware, I will try, don't leave me I need your help, thank you very much Alex-v
Abdulaziz7888 said:
Sorry I do not know how to extract a file from the firmware, I will try, don't leave me I need your help, thank you very much Alex-v
Click to expand...
Click to collapse
up up
Abdulaziz7888 said:
up up
Click to expand...
Click to collapse
I got the same issue many times with some regional FWs on my old GS5, just follow these steps and you should be ok, i guess it's a mismatched "hidden" partition size, you don't need anyway, i contains only some bloats most of the times.
- Extrat the FW with any archiving tool (i recommend 7zip).
- Remove "Hidden.img"
- Repack all other files as "tar" archive with 7zip, OR linux command line "tar -cvf G925I_AOD1.tar sboot.bin cm.bin recovery.img boot.img cache.img modem.bin system.img"
- Flash it through Odin
wanam said:
I got the same issue many times with some regional FWs on my old GS5, just follow these steps and you should be ok, i guess it's a mismatched "hidden" partition size, you don't need anyway, i contains only some bloats most of the times.
- Extrat the FW with any archiving tool (i recommend 7zip).
- Remove "Hidden.img"
- Repack all other files as "tar" archive with 7zip, OR linux command line "tar -cvf G925I_AOD1.tar sboot.bin cm.bin recovery.img boot.img cache.img modem.bin system.img"
- Flash it through Odin
Click to expand...
Click to collapse
Thank you my friend, but how do I package the files using ZIP7. I tried a lot to transfer tar and gzip but ODIN does not recognize the file, please I need an explanation for this, I spent 3 hours trying. Please wanam
wanam said:
I got the same issue many times with some regional FWs on my old GS5, just follow these steps and you should be ok, i guess it's a mismatched "hidden" partition size, you don't need anyway, i contains only some bloats most of the times.
- Extrat the FW with any archiving tool (i recommend 7zip).
- Remove "Hidden.img"
- Repack all other files as "tar" archive with 7zip, OR linux command line "tar -cvf G925I_AOD1.tar sboot.bin cm.bin recovery.img boot.img cache.img modem.bin system.img"
- Flash it through Odin
Click to expand...
Click to collapse
Thank you so much, I hope to return to the last reply to you there, know that you are available here more, await you there.
Try this Rom, unpack and flash it through Odin.
wanam said:
Try this Rom, unpack and flash it through Odin.
Click to expand...
Click to collapse
You are a great person, thank you so much . :laugh::laugh::laugh:
Help!!! Sw rev. Check fail. Device= 2. Binary=1.// efs corrupted s6 edge 64gb
hi I have a s6 edge 64gb from south Africa and I have rooted it. After a while I felt the phone was lagging and decided to unroot and flash stock firmware I did so and then my efs got corrupted now im stuck. after doing a bit of research I decided to flash a official rom from another country and its stuck on the samsung s6 edge powered by android screen....... please help
I'm trying to update to 5.1.1 from 5.0.2 but I'm unable to get the pit file in Odin. Is there any place to download it? I have looked on Google but had no luck.
delete the hidden Img from the firmware
Alex-V said:
delete the hidden Img from the firmware
Click to expand...
Click to collapse
Will that method still work for flashing using Jodin?
mackay508 said:
Will that method still work for flashing using Jodin?
Click to expand...
Click to collapse
described it many times..here's one of it
http://forum.xda-developers.com/showthread.php?t=3141455
for g925f 64go i used ZEROLTE_EUR_OPEN_HIDDEN100M.pit = no more hidden error
Hey
Yesterday I flashed a boot logo on my SM-G928F in TWRP. After that my phone doesn't boot into system or recovery anymore - there's always a blackscreen. I only can boot into download mode.
I tried to flash a stock-rom via Odin but that didn't helped - the same blackscreen, because a stock rom does not replace the boot logo.
I think I have to flash the stock boot logo ( https://drive.google.com/file/d/1378RQ5w_vAAmnQ3HB0FymZXWIm12T0Mg/view ) , but thats a zip which I can't flash via Odin.
There a two ways in my mind which could work:
1. Getting a tar.md5 file with the stock boot logo.
2. Getting a tool which allows to flash zips in download mode of the phone.
I really hope that someone could help me with my big problem.
Best regards
DGB
Hey there
I recommend to flash the firmware again but this time after flashing firmware flash the twrp and flash the zip via adb sideload ( a feature present in TWRP) as by adb sideload one is able to flash zip files as well
Or i recommend you to get to know the combination of keys that will help you to directly enter into recovery
Hope it will work
And if there is any problem let me know
As in the internet there are various ways by which a person can flash the custom rom and custom recovery via odin
Look at this link:-
http://www.lineageosrom.com/2017/07/how-to-flash-custom-rom-via-odin.html?m=1
nr10prashant said:
Hey there
I recommend to flash the firmware again but this time after flashing firmware flash the twrp and flash the zip via adb sideload ( a feature present in TWRP) as by adb sideload one is able to flash zip files as well
Or i recommend you to get to know the combination of keys that will help you to directly enter into recovery
Hope it will work
And if there is any problem let me know
As in the internet there are various ways by which a person can flash the custom rom and custom recovery via odin
Look at this link:-
http://www.lineageosrom.com/2017/07/how-to-flash-custom-rom-via-odin.html?m=1
Click to expand...
Click to collapse
Thank you for your answer but that didn't worked. The problem is that flashing the stock firmware doesn't replace or repair the boot image. So I've got a never ending blackscreen when I want to boot in system or TWRP/Recovery and that means that I'm not able to configure ADB Sideload.
I can only boot into download mode, nothing else.
I think the jpg of the boot logo I've installed was corrupted so it can't be loaded
You are in download mode so you have to press all the keys including the home button and once the download mode closes then press the "volume up key and power key and also the home button and then your phone will automatically reboot into recovery.
I know, I tried that multiple times but it doesn't work. Blackscreen... only a never ending blackscreen. The download mode is the only thing taht works. I have to flahs the old boot logo via download mode... but i don't know how
Wait for the battery to be drained out completely and then do what i said earlier
nr10prashant said:
Wait for the battery to be drained out completely and then do what i said earlier
Click to expand...
Click to collapse
I did. but it didn't work, too
I really need someone who is able to integrate the stock boot logo into a custom rom which can be flashed via Odin... Or I need a tool which allows to install zips in download mode. I tried adb sideload again but it didn't recognizes my phone when its not in recovery.
I really think that my S6 edge + is nearly died :crying:
Try to flash the firmware with the samsung smart swith.....
This will 100% works!!!!!4
Inderpreets said:
Try to flash the firmware with the samsung smart swith.....
This will 100% works!!!!!4
Click to expand...
Click to collapse
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
DGB100 said:
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
Click to expand...
Click to collapse
Not even flashing a factory firmware (4 files with pit) with repartition option selected?
What about a combination firmware and then a full stock FW?
яι¢αя∂σ said:
Not even flashing a factory firmware (4 files with pit) with repartition option selected?
What about a combination firmware and then a full stock FW?
Click to expand...
Click to collapse
I only tried to flash stock firmware with AP in Odin... and I tried stock rom with re-partition.
Where do I get those 4 files? I need XEU for my SM-G928F. It would be very nice if you could give me a more detailed instruction for this because I never worked with PIT...
get samfirm v0.3.6
On the model you put sm-g928f, region XEU, tick the binary nature box and press "check update". Download the resulting file, that is a factory firmware to do repairs in a 4 files format: bootloader, pda or ap, modem or cp and csc!
You will get this file:
SM-G928F_1_20180305151001_nsg8uwd0sh_fac.zip
Put each file in the correct field in odin!
About combination firmware, it needs to be same binary version as stock firmware already programed on phone! if first number on firmware version is a 3, combination FW need to be also bin 3!
G928FXXS4CRB4 if is 4, you need comb fw also in bin 4! if you downgrade you get odin error and a softbrick!
Was checking if any comb. fw is available, but i find only paid files for your phone model!
яι¢αя∂σ said:
get samfirm v0.3.6
On the model you put sm-g928f, region XEU, tick the binary nature box and press "check update". Download the resulting file, that is a factory firmware to do repairs in a 4 files format: bootloader, pda or ap, modem or cp and csc!
You will get this file:
SM-G928F_1_20180305151001_nsg8uwd0sh_fac.zip
Put each file in the correct field in odin!
About combination firmware, it needs to be same binary version as stock firmware already programed on phone! if first number on firmware version is a 3, combination FW need to be also bin 3!
G928FXXS4CRB4 if is 4, you need comb fw also in bin 4! if you downgrade you get odin error and a softbrick!
Was checking if any comb. fw is available, but i find only paid files for your phone model!
Click to expand...
Click to collapse
Thanks it worked for me but now I need a pit-file. Do you now where I get it?
EDIT: I found a pit-file for myself. Thank you very much for your help!
HTML:
https://drive.google.com/file/d/0BzyeAt2hy6XednpHZmhRUmtOMFk/view
DGB100 said:
Thanks it worked for me but now I need a pit-file. Do you now where I get it?
EDIT: I found a pit-file for myself. Thank you very much for your help!
HTML:
https://drive.google.com/file/d/0BzyeAt2hy6XednpHZmhRUmtOMFk/view
Click to expand...
Click to collapse
It worked means you got your phone back to normal or you could get the firmware using samfirm?
Pit file is always inside csc file on a 4 files fac firmware. Use the pit on firmware because the pit from your link can be from a early version of android and have different bits for partition sizes!
EDIT: Here, got the combination fw for the binary 4. IF your phone is already ok, don't use this!
DGB100 said:
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
Click to expand...
Click to collapse
SmartSwitch still works for my G925v.
яι¢αя∂σ said:
It worked means you got your phone back to normal or you could get the firmware using samfirm?
Pit file is always inside csc file on a 4 files fac firmware. Use the pit on firmware because the pit from your link can be from a early version of android and have different bits for partition sizes!
EDIT: Here, got the combination fw for the binary 4. IF your phone is already ok, don't use this!
Click to expand...
Click to collapse
I got my phone back to normal so thank you very much!
I have the same problem on my j2 prime I can only goto download mode and in odin tried to install stock firmware but got write fail..can you please help me with this error
hey guys so not sure if im posting in the right section but i would like to help those who having problems with there s6/s6 edge. some links will be in this post to help just keep scrolling!
So i had the same problem before but manage to fix it myself from trial and error.
Ill go through and tell you how.
step 1: so get the latest firmware for your device download it also get the pit file for your device too!
step 2: extract the firmware using 7zip so you get boot.img, recovery.img etc...
step 3: boot phone into download mode using volume down + home + power
step 4: open odin and flash the recovery image you extracted from the stock firmware as well as the pit file
step 5: load recovery and wipe/factory reset
step 6: go back into download mode and try flashing stock firmware
done should be working!
Troubleshoot:
If flashing recovery and stock downt work try flashing the pit first then recovery.img
if still does not work ignore the pit file and just carry on without the pit file
If you still have problems reply down below and i shall help you out best i can. this is what i did to fix my s6 edge
Links:
stock firmware - http://www.androidrootz.com/p/galaxy-s6-edge-stock-firmware.html
https://www.sammobile.com/firmwares/
https://www.theandroidsoul.com/samsung-galaxy-s6-edge-firmware/
https://samsung-firmware.org/model/SM-G925F/
s6 edge pit file - https://www.**********.com/download-pit-files-for-galaxy-s6-edge-all-models/
https://www.theandroidsoul.com/download-samsung-galaxy-s6-edge-pit-files-and-how-to-use-them/
odin -
https://odindownload.com
How do I add the recovery.img?
an0ym0us said:
How do I add the recovery.img?
Click to expand...
Click to collapse
Open Odin connect your device which should be in download mode click AP find the recovery.img then flash it hope this has helped