Twrp 3.2.1.0 bootloop problem - Android Q&A, Help & Troubleshooting

OK here is my problem I have a rooted Huawei y7 Prime 2018 (LDN-L21).
I made a backup in TWRP 3.2.1.0 and when i rebooted it brought me into a TWRP recovery Bootloop.
I cant go into erecovery or fastboot mode.
And my computer doesnt even reconigse the phone so cant even to adb commands.
I try to put my backup back and it doesnt seem to see the files.
I downloaded a the right stock rom and certain .img files and tried to flash them and get a error unable to mount /system /data /cache and so on so on.
So this is my siituation is::
Stuck in twrp bootloop.
Cant ercovery or fastboot.
Computer wont reconize the phone no more.(so no adb commands).
Cant flash anything due to the mounting error in twrp.
Please help me i I think my os is fine I think.
Im willing to try anything at this point.
PLEASE HELP ME.
Moonlighter

Similar question, hope to get more help .

You can not go into TWRP also?! Or you can go into TWRP and can not reboot to system/erecovery/bootload ?
Problem seems to be /misc partition. If you somehow wipe it (in twrp terminal) or flash recovery without /misc in fstub, MAYBE it would go out of recoveryloop.
Do you have unlocked bootloader with notification screen on boot like "bootloader is unlocked and phone is not trusted.... press Power button to continue..." ? If not, how you bypass it? If yes, you can hold Vol+ for 3 sec to go to eRecovery. Any change to download stock rom to external SDcard to dload folder and to hold Vol- and power on phone?

yes my bootloader is properly unlocked and no still get the loop with stockrom and try do anything in twrp have problems with mounting errors

m00nlight3r said:
yes my bootloader is properly unlocked and no still get the loop with stockrom and try do anything in twrp have problems with mounting errors
Click to expand...
Click to collapse
Where do you find or made twrp for LDN-L21? must be error in fstub or wrong busybox/toybox version.
Did you fastboot flash recovery twrp.img or fastboot flash recovery_ramdisk twrp.img ?!

Related

Can't flash twrp

Recently bricked my honor 5x used fast boot to get it out of boot loop. (Because I tried to its update my phone with twrp)now when I try to re flash twrp it gets replaced by the stock recovery Everytime . Please help!
Samething happend to me... cannot flash twrp because when i restart phone after flashing twrp, it gets replaced by stock recovery.
What i do now is to boot to twrp instead of flashing using this command:
Code:
fastboot boot twrp-3.0.0-0-kiwi.img
Hopefully there is a solution for this flashing problem.
FREAK0N said:
Samething happend to me... cannot flash twrp because when i restart phone after flashing twrp, it gets replaced by stock recovery.
What i do now is to boot to twrp instead of flashing using this command:
Code:
fastboot boot twrp-3.0.0-0-kiwi.img
Hopefully there is a solution for this flashing problem.
Click to expand...
Click to collapse
you can't just reboot after flashing recovery ...you have to boot directly to twrp after the flash with power + volume up (Skip the fastboot reboot step)
the simple way is to copy kiwi_twrp_3-21_recovery.img to your sdcard
fastboot boot kiwi_twrp_3-21_recovery.img
now in twrp choose install / image / then choose kiwi_twrp_3-21_recovery.img
next choose reboot / recovery
you now have kiwi_twrp_3-21_recovery.img
from then on adb reboot recovery from android
or power + volume up will enter TWRP
clsA said:
you can't just reboot after flashing recovery ...you have to boot directly to twrp after the flash with power + volume up (Skip the fastboot reboot step)
the simple way is to copy kiwi_twrp_3-21_recovery.img to your sdcard
fastboot boot kiwi_twrp_3-21_recovery.img
now in twrp choose install / image / then choose kiwi_twrp_3-21_recovery.img
next choose reboot / recovery
you now have kiwi_twrp_3-21_recovery.img
from then on adb reboot recovery from android
or power + volume up will enter TWRP
Click to expand...
Click to collapse
Thanks alot... i wil try it later.
Too many Links is what ADB Says
RootMega said:
Too many Links is what ADB Says
Click to expand...
Click to collapse
why are you using adb ?
did you read the instructions i posted
I have the stock recovery.
I cant get into twrp.
I tried to flash then go straight to twrp which gets replaced by stock bootloader
Idk it gets replaced everytime
Okay the adb thing stopped I got into twrp by doing the fastboot thing but when i boot into recovery it goes to the stock recovery.
RootMega said:
Okay the adb thing stopped I got into twrp by doing the fastboot thing but when i boot into recovery it goes to the stock recovery.
Click to expand...
Click to collapse
I really don't know why you don't seem to get it
it's this simple
you fastboot boot kiwi_twrp_3-21_recovery.img
now while in TWRP copy kiwi_twrp_3-21_recovery.img to the phone
Also copy SuperSU-v2.64.zip (or newer) to the phone
after the files are copied choose Install / Image / kiwi_twrp_3-21_recovery.img
next choose install / SuperSU.zip
next choose Reboot / Recovery
you now have TWRP recovery and you can enter it by using power + volume up
or from an app on the phone (I use Quickboot) or from a pc with adb reboot recovery
I have the same problem, i tried with your method but the system continue to replace bootloader, impossible to keep twrp on recovery
Edit : I try to install Root Checker, it detect my phone is root but impossible to access to TWRP, very strange
clsA said:
you can't just reboot after flashing recovery ...you have to boot directly to twrp after the flash with power + volume up (Skip the fastboot reboot step)
the simple way is to copy kiwi_twrp_3-21_recovery.img to your sdcard
fastboot boot kiwi_twrp_3-21_recovery.img
now in twrp choose install / image / then choose kiwi_twrp_3-21_recovery.img
next choose reboot / recovery
you now have kiwi_twrp_3-21_recovery.img
from then on adb reboot recovery from android
or power + volume up will enter TWRP
Click to expand...
Click to collapse
Tried this on my KIW-L21, as this is the only way I did not try it yet...
Did not work, unfortunately, I assume the OP could have the same problem as I already posted in the TWRP thread:
http://forum.xda-developers.com/showpost.php?p=66678377&postcount=509
(It is a shame people spam this thread with unlocking problems, though)
EarlyMon mentioned something about dual recovery partitions here: http://forum.xda-developers.com/showpost.php?p=66838009&postcount=529
So regardless how many times I flash TWRP it wont stick until the next reboot to recovery, as it gets replaced by the stock one all the time.
I am thankful for every news on that topic and I would happily help(to the extent I am able to) getting TWRP back onto our phones :good:
P.S.: I am not quite sure if the OP has another problem in flashing the recovery, though.
Nekly said:
Tried this on my KIW-L21, as this is the only way I did not try it yet...
Did not work, unfortunately, I assume the OP could have the same problem as I already posted in the TWRP thread:
http://forum.xda-developers.com/showpost.php?p=66678377&postcount=509
(It is a shame people spam this thread with unlocking problems, though)
EarlyMon mentioned something about dual recovery partitions here: http://forum.xda-developers.com/showpost.php?p=66838009&postcount=529
So regardless how many times I flash TWRP it wont stick until the next reboot to recovery, as it gets replaced by the stock one all the time.
I am thankful for every news on that topic and I would happily help(to the extent I am able to) getting TWRP back onto our phones :good:
P.S.: I am not quite sure if the OP has another problem in flashing the recovery, though.
Click to expand...
Click to collapse
So you are booting TWRP
Installing / TWRP.Img in TWRP and Reboot recovery and your not booting to TWRP ?
Just my two cents into this thread: apparently (from my personal experience, and EarlyMon seems to back this up) the Honor 5X for whatever reason allows the installation of TWRP but still keeps Huawei's stock recovery in place, unlike most phones. What's more, it randomly (yeah, guessing it's not random obviously, but I don't have the slightest clue what the pattern might be) decides to boot into stock recovery while I use the same hardware keys that have continuously booted me into TWRP up until that point. This behavior led me to believe I had bricked my phone for a day, lol (I made a recent post about it on this forum, in case anyone cares).
Bottom line: if you can't boot into TWRP even though you made sure to install it correctly, try changing the key combo. Vol down + Power not working for you? Try Vol Up. Neither work? Try Vol Up + Down + Power. Spice it out and it might solve your problems.
clsA said:
So you are booting TWRP
Installing / TWRP.Img in TWRP and Reboot recovery and your not booting to TWRP ?
Click to expand...
Click to collapse
That is correct:
Connected Phone to PC
ADB reboot bootloader
fastboot boot kiwi.img
install image kiwi.img
reboot recovery
Tada, Stock eMUI Recovery :[
I really had hoped it would do the trick, though.
Nekly said:
That is correct:
Connected Phone to PC
ADB reboot bootloader
fastboot boot kiwi.img
install image kiwi.img
reboot recovery
Tada, Stock eMUI Recovery :[
I really had hoped it would do the trick, though.
Click to expand...
Click to collapse
what version of TWRP are you using ? whats the real file name ?
Has anyone tried flashing TWRP with TWRP Manager from the play store?
Sm0k3d 0uT said:
Has anyone tried flashing TWRP with TWRP Manager from the play store?
Click to expand...
Click to collapse
Been there and done that. Same outcome.
clsA said:
what version of TWRP are you using ? whats the real file name ?
Click to expand...
Click to collapse
The last approach was done with the one from the first post of the TWRP thread here on XDA(https://goo.gl/53xai9) "kiwi_twrp_3-21_recovery.img"
I also tried the TWRP images from https://twrp.me/devices/huaweihonor5x.html but always the same result.
I can try with a specific image, just give me a link and I'll try to flash it. :fingers-crossed:

Stuck in TWRP

Hey,
I wanted to do a nandroid backup so I did adb reboot recovery to go to TWRP, now I can't boot into system, I'm stuck in twrp, I can't even power off the phone it keeps booting up again and again. Please help i'm really lost. Thanks
I did boot to System but with another key combinaison (volume down + power) , I think it's all messed up and the phone thinks that the recovery is the default boot option.. idk how to change this
Nexx_ said:
I did boot to System but with another key combinaison (volume down + power) , I think it's all messed up and the phone thinks that the recovery is the default boot option.. idk how to change this
Click to expand...
Click to collapse
If you can reach the stock recovery, just put update.app file and install it. If you can't, try to flash boot.img and recovery.img manually. After that, try to install rom again.
memht said:
If you can reach the stock recovery, just put update.app file and install it. If you can't, try to flash boot.img and recovery.img manually. After that, try to install rom again.
Click to expand...
Click to collapse
Okay thank you, I will try flashing them manually because I have twrp
@DigiGoon Please can you help me with it?
You were on which system? Stock or any Custom ROM?
DigiGoon said:
You were on which system? Stock or any Custom ROM?
Click to expand...
Click to collapse
I was on stock b371
Okay follow these step, if you don't understand any step ask again. But follow these:
Download the UPDATE.APP of the Build number you were on before.
Extract system.img, boot.img, recovery.img, cust.img from that UPDATE.APP
Flash all these files via bootloader mode, to boot into bootloader mode, once a loop is over and you see blank screen on your phone, quickly press Vol DOWN button and while pressing it connect your phone to a PC. If this doesn't work and you get into recovery, then in recovery go to option Reboot, in that select Bootloader.
Once in bootloader mode, flash these files by firing these commands from a CMD, make sure files are situated in the same location where you open up the CMD.
Code:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash boot boot.img
Now after your phone boots up normally, put the same UPDATE.APP from which these files were extracted in dload folder of your external SDcard.
Now switch off your phone and press all the three buttons(Vol UP + Vol DOWN + Power) simultaneously.
Flashing process will start.
Hope this helps.
DigiGoon said:
Okay follow these step, if you don't understand any step ask again. But follow these:
Download the UPDATE.APP of the Build number you were on before.
Extract system.img, boot.img, recovery.img, cust.img from that UPDATE.APP
Flash all these files via bootloader mode, to boot into bootloader mode, once a loop is over and you see blank screen on your phone, quickly press Vol DOWN button and while pressing it connect your phone to a PC. If this doesn't work and you get into recovery, then in recovery go to option Reboot, in that select Bootloader.
Once in bootloader mode, flash these files by firing these commands from a CMD, make sure files are situated in the same location where you open up the CMD.
Code:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash boot boot.img
Now after your phone boots up normally, put the same UPDATE.APP from which these files were extracted in dload folder of your external SDcard.
Now switch off your phone and press all the three buttons(Vol UP + Vol DOWN + Power) simultaneously.
Flashing process will start.
Hope this helps.
Click to expand...
Click to collapse
Thank you a lot for helping me I'll try to follow the process as soon as I get windows on my Mac
@DigiGoon No need to flash system.img actually Just cust, boot and recovery is enough (i think). I forgot to tell cust but it's not necessary always.
memht said:
@DigiGoon No need to flash system.img actually Just cust, boot and recovery is enough (i think). I forgot to tell cust but it's not necessary always.
Click to expand...
Click to collapse
The way his phone is acting, system is the main thing he needs to flash.
Same kind of problem different dude
DigiGoon said:
Okay follow these step, if you don't understand any step ask again. But follow these:
Download the UPDATE.APP of the Build number you were on before.
Extract system.img, boot.img, recovery.img, cust.img from that UPDATE.APP
Flash all these files via bootloader mode, to boot into bootloader mode, once a loop is over and you see blank screen on your phone, quickly press Vol DOWN button and while pressing it connect your phone to a PC. If this doesn't work and you get into recovery, then in recovery go to option Reboot, in that select Bootloader.
Once in bootloader mode, flash these files by firing these commands from a CMD, make sure files are situated in the same location where you open up the CMD.
Code:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash boot boot.img
Now after your phone boots up normally, put the same UPDATE.APP from which these files were extracted in dload folder of your external SDcard.
Now switch off your phone and press all the three buttons(Vol UP + Vol DOWN + Power) simultaneously.
Flashing process will start.
Hope this helps.
Click to expand...
Click to collapse
I'm having similar problem as OP. I get access to TWRP(by holding power+vol up), but not fastboot anymore. My TWRP is in chinese and but I found the reboot menu and the alternatives are: System, Power Off, Recovery and Download. I think i've tried them all and none of them brings me fastboot. I went into loop when I tried to install SuperSu through TWRP on stock rom. Is there hope? Yesterday I managed to get into fastboot, but can't remember what I did. I heard something about draining the battery and then theres hope?
mosoo said:
I'm having similar problem as OP. I get access to TWRP(by holding power+vol up), but not fastboot anymore. My TWRP is in chinese and but I found the reboot menu and the alternatives are: System, Power Off, Recovery and Download. I think i've tried them all and none of them brings me fastboot. I went into loop when I tried to install SuperSu through TWRP on stock rom. Is there hope? Yesterday I managed to get into fastboot, but can't remember what I did. I heard something about draining the battery and then theres hope?
Click to expand...
Click to collapse
Several options you got:
Install older SuperSU. I remember I had the same thing and the only way was to downgrade SuperSU. 2.5x, I think.
Try to access fastboot - turn off phone, keep vol- pressed and power up. Release vol- when you see fastboot screen. Try it with and without USB PC connection.
Try to deplete your battery. It works in other devices as after charging again, boot.img behaves differently. Don't ask me why, but if the phone charges as it is, no harm in trying.
Wipe all partitions - Dalvik, cache, data, internal storage and system. And then install a custom ROM from sdcard or USB-OTG. You can access H7 content from PC, through USB, while in TWRP.
Huawei eRecovery
I got into Huawei eRecovery EMUI, but when I try to "Download latest version and recovery" and connect to wifi it fails:"Getting package info failed". The other options are Reboot and Shutdown. Could this be useful?
Another question how to transfer to sd-card when in twrp. The phone is detected in windows as MTP thingy, but in adb shell no devices is found... I'm too noob for this.
Got into fastboot mode, and flashed all the imgs except system.img where I get error "cannot load"... Got the ADB drivers now, but still adb shell finds no devices. It appears that my TWRP is gone, and instead I get Huawei eRecovery. So my problem now is that I dont get system.img flashed, still stuck at honor-logo, and can't push files with adb, I get "no devices". Any tips?
Got it now, thank you very much! But what's the point in doing the last steps with dload when everything seems to be good?
mosoo said:
I got into Huawei eRecovery EMUI, but when I try to "Download latest version and recovery" and connect to wifi it fails:"Getting package info failed". The other options are Reboot and Shutdown. Could this be useful?
Another question how to transfer to sd-card when in twrp. The phone is detected in windows as MTP thingy, but in adb shell no devices is found... I'm too noob for this.
Got into fastboot mode, and flashed all the imgs except system.img where I get error "cannot load"... Got the ADB drivers now, but still adb shell finds no devices. It appears that my TWRP is gone, and instead I get Huawei eRecovery. So my problem now is that I dont get system.img flashed, still stuck at honor-logo, and can't push files with adb, I get "no devices". Any tips?
Got it now, thank you very much! But what's the point in doing the last steps with dload when everything seems to be good?
Click to expand...
Click to collapse
Please share your solution with others, so that your post can be referred.
Doing a forced updated (dload) gives the absolute assurance you flashed all the partitions correctly with all the *.img compressed files in the update.app file.
mosoo said:
Got it now, thank you very much! But what's the point in doing the last steps with dload when everything seems to be good?
Click to expand...
Click to collapse
When you flash the partitions manually, we are not flashing all of them, only some of them, and some partitions are not in regular img format, so by doing the three button update we can put all the partitions in their respective places.
Another benefit of doing force update is that if you don't know your build number and flashed system.img, cust.img etc of some other build then by doing a force update all the img files of same build are flashed.

Dumb Mistake PLEASEE HELP!

So earlier today I was trying to install my stock recovery. Was a success but I also accidentally installed my stock recovery over my boot image. So now no matter what keys I hold to get to bootloader or recovery it automatically takes me to the recovery screen. Yes I have tried wiping data/factory rest and also tried caches partition. I have also tried doing it the older way by using adb/fastboot but my device wont connect. Yes I have the correct drivers. Im thinking its because I cant get into my phone to enable USB debugging. So any ideas on how I can re flash a new boot.img and recovery.img?
So you did a fastboot flash boot and typed in your recovery file?
Try the forced update method.
Download the latest firmware for your phone, extract it to get dload folder containing update.app, copy that dload folder to an SD card. Since your phone already boots up into recovery it should start the update.
rslimitless said:
So earlier today I was trying to install my stock recovery. Was a success but I also accidentally installed my stock recovery over my boot image. So now no matter what keys I hold to get to bootloader or recovery it automatically takes me to the recovery screen. Yes I have tried wiping data/factory rest and also tried caches partition. I have also tried doing it the older way by using adb/fastboot but my device wont connect. Yes I have the correct drivers. Im thinking its because I cant get into my phone to enable USB debugging. So any ideas on how I can re flash a new boot.img and recovery.img?
Click to expand...
Click to collapse
Boot to TWRP then copy boot.img to your phone and then use Install / Image / choose boot.img
you can boot TWRP from the bootloader screen with fastboot boot TWRP.img
To enter the bootloader - turn off phone - plug phone into the PC - boot up phone with vol down + power

Linux Penguin Fastboot Logo, Decrypt Data, No Recovery.

I need help, My phone was unlocked officially, and I have ZCX TWRP build 28081016 before. Then I flash Nougat ROM (Pure Nexus) from MIUI 8 8.2.3.0 without Wipe Internal Storage. Then it works normally. But since I go back to TWRP, I got Decrypt Data with password there. So I cancel it and then I got 0 Internal Storage. And it back while i text some **** in the decrypt password.
While reboot to system, It also asking password too.
Then I reflashing ROM with Clean Install method (wipe anything) but its still asking goddamn passwords.
Then I go Reboot Recovery again and text any **** password but it works! I got my Internal Storage back.
Then I try to flash zcx recovery build 30122016 (latest version) from recovery. Now I got my recoveries gone. There's only phone with usb cable images. Anything goes wrong (corrupted boot.img or something) here? Is it save if I reflash from PC? How to don't get decrypt sdcard?
I got other problem too. I have changed my splash logo (boot logo) using Google Pixels boot logo here. But I have never come back to Mi splash logo while clean installing MIUI ROM from recovery. Where is my problem here?
And this is my big problem (maybe) (cause I still don't get problems here). Anyone of you facing your Fastboot Logo with tiny Linux Penguin images? I can't go "adb reboot fastboot" here. And I can go to fastboot mode with volume- + power button only. It's not working too with reboot bootloader in TWRP. I guess my fastboot isn't working with Miflash or some ****. But works with adb. How can I get Mi Bunny Fastboot again?
Please help me. and tell me what should I do. Thankyou.
ojedee said:
I need help, My phone was unlocked officially, and I have ZCX TWRP build 28081016 before. Then I flash Nougat ROM (Pure Nexus) from MIUI 8 8.2.3.0 without Wipe Internal Storage. Then it works normally. But since I go back to TWRP, I got Decrypt Data with password there. So I cancel it and then I got 0 Internal Storage. And it back while i text some **** in the decrypt password.
While reboot to system, It also asking password too.
Then I reflashing ROM with Clean Install method (wipe anything) but its still asking goddamn passwords.
Then I go Reboot Recovery again and text any **** password but it works! I got my Internal Storage back.
Then I try to flash zcx recovery build 30122016 (latest version) from recovery. Now I got my recoveries gone. There's only phone with usb cable images. Anything goes wrong (corrupted boot.img or something) here? Is it save if I reflash from PC? How to don't get decrypt sdcard?
I got other problem too. I have changed my splash logo (boot logo) using Google Pixels boot logo here. But I have never come back to Mi splash logo while clean installing MIUI ROM from recovery. Where is my problem here?
And this is my big problem (maybe) (cause I still don't get problems here). Anyone of you facing your Fastboot Logo with tiny Linux Penguin images? I can't go "adb reboot fastboot" here. And I can go to fastboot mode with volume- + power button only. It's not working too with reboot bootloader in TWRP. I guess my fastboot isn't working with Miflash or some ****. But works with adb. How can I get Mi Bunny Fastboot again?
Please help me. and tell me what should I do. Thankyou.
Click to expand...
Click to collapse
You got your device encryption so remove it
Boot to fast boot volume - plus power button combo then connect to PC
Then use fast boot modified in order to boot into edl
Then flash latest miui fast boot ROM through miflash
Then reboot
Then unlock bootloader flash zcx twrp the hen format data from twrp under wipe option
[email protected] said:
You got your device encryption so remove it
Boot to fast boot volume - plus power button combo then connect to PC
Then use fast boot modified in order to boot into edl
Then flash latest miui fast boot ROM through miflash
Then reboot
Then unlock bootloader flash zcx twrp the hen format data from twrp under wipe option
Click to expand...
Click to collapse
But i have never ever encrypt anything on my phone. Now my device can't do adb reboot fastboot. But if i reboot to recovery first. It works with power and volume down

[Help] Bootloop on Xiaomir Redmi Note 4X

Hello, I'm kind of new at this (this is my first post) so be gentle
So, the last few days I've been trying to install a new rom on my phone (Redmi Note 4X) and the problems started with the model. I only seem to find Redmi Note 4 roms, and as I've come to find, mine is supposed to be the mido one (correct me if I'm wrong though). I have unlocked the bootloader, I have installed and enabled the fastboot on my phone, so the next step was to install the latest TWRP.
There came more problems; I tried doing this through the app and it just wouln't flash it. So I found a guide on how to root my phone and install a new recovery through adb and I followed it. It didn't work. I couldn't find the right twrp version for my phone. When I finally did realise my phone needed mido, I found the latest from the TWRP website. It wouldn't load through adb again. I found a thread about a fixed mido version, which finally worked for me. But my brother who was helping me, and isn't as much of a noob as I am (he has flashed rom and recoveries many times on his Nexus 5X), decided that I necessarily need the latest twrp if I'm going to flash a new rom, so he flashed the new twrp through the old one, and soft bricked my phone (I think). So I'm searching for a guide to unbrick it. (Which I can't seem to find to work at least).
To conclude;
I have unlocked my bootloader
I have access to the fastboot
I tried to flash a recovery
I failed many times, but I managed it
I flashed the latest twrp and bricked my phone
I don't have access to the recovery
My phone is still on a bootloop
I am not sure about which phone model I have
Help!
Thanks in advance.
1. Just check your phone model on its box. If its Snapdragon version (Mido), then just install it via fastboot. (code: fastboot flash recovery twrp-midoxx.img). If you are success, then try to reboot to recovery (fastboot boot twrpmido-xx.img). After booted, then you just manage to rom.zip you want to install. If you don't have it, then download it before from your PC and push it to your phone. Or just enable Mtp checklis from TWRP n copy that file to your internal phone/sdcard. Wipe all/factory reset except internal storage. Then you dan install rom.zip normally. N reboot. (Note: if you are on MIUI and wanted to always stay on it, just flash the file called lazyflasher.zip. n' wipe cache n art cache only then reboot). Flashing custom recovery on stock MIUI Will manage the device Going to bootloop)
2. If you have mediatek version (nikel), searching the fastboot Rom from miui website and flash it normally via fastboot. (SP Flash tool)
Warning: flash the wrong rom file into wrong phone Will make your device brick. So becarefull n knowing what model/code name you have.
Dyt199412syam said:
1. Just check your phone model on its box. If its Snapdragon version (Mido), then just install it via fastboot. (code: fastboot flash recovery twrp-midoxx.img). If you are success, then try to reboot to recovery (fastboot boot twrpmido-xx.img). After booted, then you just manage to rom.zip you want to install. If you don't have it, then download it before from your PC and push it to your phone. Or just enable Mtp checklis from TWRP n copy that file to your internal phone/sdcard. Wipe all/factory reset except internal storage. Then you dan install rom.zip normally. N reboot. (Note: if you are on MIUI and wanted to always stay on it, just flash the file called lazyflasher.zip. n' wipe cache n art cache only then reboot). Flashing custom recovery on stock MIUI Will manage the device Going to bootloop)
2. If you have mediatek version (nikel), searching the fastboot Rom from miui website and flash it normally via fastboot. (SP Flash tool)
Warning: flash the wrong rom file into wrong phone Will make your device brick. So becarefull n knowing what model/code name you have.
Click to expand...
Click to collapse
Hello and thanks for the reply. I have the snapdragon version, but all I'm asking is how am I supposed to flash the lazyflasher without accessing the recovery? Through adb?
fionik said:
Hello and thanks for the reply. I have the snapdragon version, but all I'm asking is how am I supposed to flash the lazyflasher without accessing the recovery? Through adb?
Click to expand...
Click to collapse
Firstly, enter fastboot mode on your device. Connecting to pc and flashing the twrp for mido. "fastboot flash recovery twrp-mido.img". Then boot to it using " fastboot boot twrp-mido.img". Then you will enter the recovery (twrp) in a second. Copy the lazyflasher into your phone (enable mtp first in Mount option in twrp) that you downloaded from pc. Just flash the lazyflasher.zip and reboot.
And why you don't want to flash lazyflasher when it very easy to flash it using recovery twrp? adb? You mean android debugging? Actually, you cant flash a .zip file into your system partition except through fastboot mode. However, fastboot mode (in cmd) only recognize a .img file. I just try to tell you the easier method to make your device boot up.
Dyt199412syam said:
Firstly, enter fastboot mode on your device. Connecting to pc and flashing the twrp for mido. "fastboot flash recovery twrp-mido.img". Then boot to it using " fastboot boot twrp-mido.img". Then you will enter the recovery (twrp) in a second. Copy the lazyflasher into your phone (enable mtp first in Mount option in twrp) that you downloaded from pc. Just flash the lazyflasher.zip and reboot.
And why you don't want to flash lazyflasher when it very easy to flash it using recovery twrp? adb? You mean android debugging? Actually, you cant flash a .zip file into your system partition except through fastboot mode. However, fastboot mode (in cmd) only recognize a .img file. I just try to tell you the easier method to make your device boot up.
Click to expand...
Click to collapse
As I said above, I can only access the fastboot, and I get errors in the adb when I try to flash the twrp image.
fionik said:
As I said above, I can only access the fastboot, and I get errors in the adb when I try to flash the twrp image.
Click to expand...
Click to collapse
Share your error please.
Try fastboot boot twrp.img

Categories

Resources