Was there ever any concensus with what the best screen protection is for the xzp? There are a couple of threads but they are far too long and out of date. Thanks in advance.
P.s the case I'm using and love is the Rugged Armor case by Spigen.
I prefer the TPU screen protectors to tempered glass protectors. Easily available on AliExpress
Pros:
Cover the whole screen, including edges
Barely visible on the screen when applied (unlike other protectors)
Cheaper
Do not break
Cons:
Difficult to apply (not that difficult though)
Do not have olebophobic coating
Takes 12 hours for smaller bubbles to disappear
Thanks, I'll have a look at that.
There are several TPU cases... Does you've a link to this item?
Can someone post edge to edge screen protector recommendation please
Has anyone tried this one?
https://panzerglass.com/screen-prot...ors/panzerglass-premium-sony-xperia-xz-black/
Can confirm the one above is quite good, slight curve on edges. Only issue is it lifts from edges in tight case like spigen
hasaan6545 said:
I prefer the TPU screen protectors to tempered glass protectors. Easily available on AliExpress
Pros:
Cover the whole screen, including edges
Barely visible on the screen when applied (unlike other protectors)
Cheaper
Do not break
Cons:
Difficult to apply (not that difficult though)
Do not have olebophobic coating
Takes 12 hours for smaller bubbles to disappear
Click to expand...
Click to collapse
I use a TPU screen protector. It's the best for covering the whole screen.
The biggest con for me is that it is a piece of plastic and using the screen isn't as smooth due to the texture of TPU.
But still highly recommended for the protection it provides!
May I know what screen protector do you use?
I use hydrogel screen protector.
It's nearly invisible, after I applied it I literally thought I did something wrong.
It is not a good option if you have a habit of dropping your phone, I doubt it will help in this case, but it's amazing, it feels very pleasant, it hides existing small scratches, you have less fingers prints and material is self-recovering, small scratches arw gone after 24hours.
I’m using Skinomi screen protector, it protects the screen perfectly, no bubble and invisible.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Envoyé de mon iPad en utilisant Tapatalk
Skinomi matte version is awesome - no fingerprints and no glare on screen!
https://www.amazon.com/dp/B06XKJQNY4/ref=cm_sw_r_apap_CD1D2ZYggRdYJ
Related
Hey guys
I dropped my phone the other day, and a wild crack appeared I figured I had shattered my screen. It did have a tempered glass screen protector on it though, so I had my hopes that the damage was minimal. I took off the screen protector today, here are the results:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The phone is 100% fine. Screen is flawless. The drop shattered the glass from the protector and not the screen itself. It was somewhat of a nasty drop too. Dropped right onto the metal legs of my desk chair :laugh::laugh:
Highly recommend Nillkin 9H hardness glass protector. I have one on the back too
nice. I have the Nillkin too since August. That shatter protection is the main reason why I use the protector. Great to see it actually works.
I almost lost hope of getting this device due to the self cracking issues, but thanks to this my hopes got high again.
Hehe yeah tempered glass is awesome, you should see the state of the tempered glass on my old Z after many concrete face plants , yet the glass underneath is mint not so much the bezels
The Z3 will be the first smartphone i use with a tempered glass screen protection.. I only heard about those from the xda forums, they're not popular at all in germany. However i really hope for a more glass-like feeling, less persistant fingerprints and so on.
Keep in mind that the tempered glass is like 0.3mm high and therefor more like to break by hits like the one you had. You can see that the crack started at the left side of the screen. Without tempered glass, the screen is flush with the bezel, so i think that your glass would have survived that, too.
Nice, but remember if its a corner impact you will be less lucky.
Anyone buy a screen protector or bumper for their gen 2? I definitely want to pick up at least a screen protector if not both.
JerseyDubbin said:
Anyone buy a screen protector or bumper for their gen 2? I definitely want to pick up at least a screen protector if not both.
Click to expand...
Click to collapse
Best brand/quality screen protector : atFoliX - Made in Germany.
Been using their products for years on many of my devices (phones, tablets, watches), but have had hard time to find those for my 360 2nd Gen, guess it's too soon... Ended up finding it on Amazon.de http://goo.gl/wGGkuv
Don't waste your money on cheap unpopular brands, you'd just like me, throw things in the garbage
Nillkin tempered glass screen protector
Thanks for the quick replies. Beaubin are you from the US? Just curious about time frame for delivery. I might end up getting both of these, I have a tendency to scratch things so backups are nice.
I too have been looking for a bumper protector. I can't believe third party makers aren't jumping on it.
http://www.shapeways.com/product/AQ...l-gen-1?li=search-results-1&optionId=42914419
Anyone try these? Will it fit the 2nd gen?
Does anyone have a photo with a screen protector on? I feel it make look a little cheesy.
sebastianraven said:
Does anyone have a photo with a screen protector on? I feel it make look a little cheesy.
Click to expand...
Click to collapse
Tempered Glass Screen Protector. Not really noticeable but I've been having issues with Auto brightness since I've added the Protector. It just always stay extremely dim so now I leave it on "2" instead of Auto.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G925F using Tapatalk
I purchased this bumper case last night for $8 and will report back, with photos, when it arrives.
http://www.shapeways.com/product/KMXRCKRGF/moto-360-gen-2-bumper-case-46mm-mens-short
The seller had various colors to choose from in both 42mm and 46mm sizes.
The bumper case arrived today. Fits nicely:
The material is slightly on the rough side, but that is mentioned in the description of the item.
My Moto also has a Slim 9H Tempered Glass LCD Screen Protector on it.
abrahan said:
The bumper case arrived today. Fits nicely:
The material is slightly on the rough side, but that is mentioned in the description of the item.
My Moto also has a Slim 9H Tempered Glass LCD Screen Protector on it.
Click to expand...
Click to collapse
How does the material feel? I Have read a comment in the shop, that the material feels disgusting.
Sun_Dancer said:
How does the material feel? I Have read a comment in the shop, that the material feels disgusting.
Click to expand...
Click to collapse
at first, it felt like it was going to snag on everything.
I don't even notice it anymore.
It doesn't feel great but it isn't chalky or anything.
So I decided to get a heavy duty case as a backup, so I went with the Poetic Revolution. It'll definitely handle being more rough on the phone, yet it doesn't add much more bulk than the Quarterback series case does.
The case itself is a two piece...there's a hard plastic with the built in screen protector, and then a nice rubbery TPU wraps around it. It's easy to take apart and put together. There's flaps over the bottom of the case to protect the ports, even though since the phone is waterproof it really doesn't need them.
The back is that rubbery TPU, but it's a little bit slick. It's not hard plastic like the quarterback so it has a bit more resistance to sliding around. The sides have nice rubbery grip, and the buttons are easy to push.
I'm not a huge fan of cases with built in screen protectors, but I figured I'd get one to have just in case...but the protector is less than desirable. It accumulates fingerprints much more so than a regular screen protector would. If anything, just like on the Tab S revolution cases, you may want to attempt to cut the built in protector out. I won't bother because I like having full protection incase I ever need it, but it's something to think about.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All in all, it's a nice case. Check it out on amazon here:
http://www.amazon.com/Revolution-Ab...65158545&sr=8-1&keywords=poetic+revolution+s7
full res pics:
http://imgur.com/a/ZG8Lc
I see the Spigen Curved Crystal in there.
felloffthetruck said:
I see the Spigen Curved Crystal in there.
Click to expand...
Click to collapse
haha yep. it's a great protector. scratches easily though so that's annoying. but it fits well.
Sent from my Samsung Galaxy S7 using Tapatalk
Does it interfere with wireless charging? My lifeproof fre doesnt but the screen protector on the s7 fre is atrocious. So much so I am using a tech21 at the moment without a screen cover.
sabooher said:
Does it interfere with wireless charging? My lifeproof fre doesnt but the screen protector on the s7 fre is atrocious. So much so I am using a tech21 at the moment without a screen cover.
Click to expand...
Click to collapse
No, it doesn't interfere with wireless charging.
I just got my Pixel last night and immediately put on a case and screen protector.
Caseology Vault Series Case
Choetech Tempered Glass Screen Protector
I'll start with the case: The case feels dense and feels like it will help with any drops. I had to get a opaque case because I put a magnet inside on the back of the case for my car mount. The case fits snuggly and the phone can easily be put in and removed from the case. The cuts outs look to be exact and you can put regular sized 3.5mm headphone jack into it ( Most headphone's will fit but if you get something with a fatter head, it may not fit).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The look of the case is what was advertised - gives sort of a brushed metal look in the back and carbon fiber design around the camera. The raised lip should give you protection incase you drop it screen down onto the ground.
Maybe my fingers are wimpy but the edges of the case dig into my pinky when I'm texting and holding the phone for some periods of time but that's minor issue. The case itself is pretty thin and even with the case on the buttons are clicky and responsive.
The Choetech screen protector fits the screen but you will see that it is exactly the width of the screen so it has 0 forgiveness if you are slightly off. Mine is slightly off and I'm trying not to focus too much on it but it really friggin bugs me. I wish they would have made it slightly wider by a few mm's for a small % of error when applying.
Overall, it feels like glass and it doesn't get much finger prints on it. When if does, you can easily wipe is off with your shirt or a rag.
I'd definitely recommend the case and the screen protector but I will probably write a request to Choetech to see if they're willing to make the width of the screen protector bigger.
Good to see more TGSP that's properly cut to cover the LCD and actually sticks.
The case looks even better on a black pixel. Enjoy mate.
Sent from my Nexus 6 using XDA-Developers mobile app
Hi there; as I ordered a couple of Aliexpress cases for the Oneplus5 due to having nothing in local stores here in NZ.
It was a bit of a crapshoot but this is the first of them to arrive.
This is the case here: https://www.aliexpress.com/item/GKK...-Case-Thin-Fashion-5-5-Matte/32822336582.html
Pros:
Slim
Good looking IMNSHO available in range of colours - masks front and back of phone.
Includes a Glass screen protector
Good cutout and recess for camera bump
Cheap ($5.45 NZD)
Add's much needed grip without much bulk
Has side lanyard/strap hole
Cons:
Glass screen protector does not fit properly
Is hard plastic no silcon/rubberised at all
Tight fit - potencial to break buttons if not careful when fitting
No install instructions/application alchol wipes etc
Overall am fairly pleased with the case. It fits well adds grip to the phone and has recess in all the right places. Two small holes at the bottom of the phone on the right side also let you add a string/lanyard to the phone if you are so inclined.
The screen protector is another story. It's a hard glass type and comes with an applicator sticker protector. The moment I started to apply it I regretted taking off the OEM plastic protector as I could tell it wasn't going to align properly with the OO5.
After some fiddling around I got it approximately in the best orientation I could. It's unfortunately just isn't cut properly for the OO5 dead on it misses about 40-60pixels of the sides of each of the left and right screens.
Fitting the case back on in the hope it would improve the glass actually deteriorates the protector more, creating aberrations from the pressure from tight fitting top and bottom clips of the case.
tl;dr Great slim case, screen protector is rubbish - throw away and use another screen protector with the phone; literally anything else. Based on what I hear of the Official Glass one - I would wager this case is useless with it due to the tight fit. Works fine with the OEM plastic one.
I've tried to include photos as best as I can.
Cheers - @aenertia
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}