LG G5[H850] Bricker (bootloop) - LG G5 Questions & Answers

hello all,
sorry for my english.
My wife has my old phone G5, with twrp and fulmicsrom. But...
But, this morning, she deleted an application, but impossible to know which one. The phone starts in bootloop, with the blue LED flashing slowly.
I wonder if it failed to remove the boot loader (can not boot above).
adb no longer sees the phone, fastboot either.
The only access still possible is with "high flight" + "USB cable plugged". The phone goes into update download mode.
How can I restore a bootloader or a rom? With which software?
Thank you for your help.
Remi

rsuinux said:
hello all,
sorry for my english.
My wife has my old phone G5, with twrp and fulmicsrom. But...
But, this morning, she deleted an application, but impossible to know which one. The phone starts in bootloop, with the blue LED flashing slowly.
I wonder if it failed to remove the boot loader (can not boot above).
adb no longer sees the phone, fastboot either.
The only access still possible is with "high flight" + "USB cable plugged". The phone goes into update download mode.
How can I restore a bootloader or a rom? With which software?
Thank you for your help.
Remi
Click to expand...
Click to collapse
flash a stock H850 rom in download mode with LGUP
Sent from my LG-H830 using XDA Labs

rsuinux said:
hello all,
sorry for my english.
My wife has my old phone G5, with twrp and fulmicsrom. But...
But, this morning, she deleted an application, but impossible to know which one. The phone starts in bootloop, with the blue LED flashing slowly.
I wonder if it failed to remove the boot loader (can not boot above).
adb no longer sees the phone, fastboot either.
The only access still possible is with "high flight" + "USB cable plugged". The phone goes into update download mode.
How can I restore a bootloader or a rom? With which software?
Thank you for your help.
Remi
Click to expand...
Click to collapse
So the recovery option doesn't work either? Because if it would work you could ofcourse just reflash Fulmics. I suppose she deleted it with root access accidentally?

Thanks for tour answers.
My problem is :
how to flash (original firmware or fulmics)?
In the phone, ok: mode download (thé only mode acces)
But, on my computer, which software to use?
Rémi.

Hello,
I come back with my problem. I got a kdz file: H85020v_00_OPEN_EU_OP_0323.kdz
But you can not find a utility to flash in download mode.
Are you little idea for me please?
Remi.

Download mode:
Turn off phone.
Hold volume up.
Insert USB cable still holding volume up.
Use LGUP and you need G5 dll files (drivers).
Info

Thanks for the Link
is it risky to flash the firmware
I recovered, while I had the fulmicrom before? I think so.
Is there a fulmicrom in kdz file?
Remi

hello all,
This post to give news of the smartphone:
I downloaded the various files here: https://www.stechguide.com/download-install-stock-rom-lg-g5/ (thanks @Sebar87 for the first link)
I Upgrade my kdz file ... 1% .. 2% ... 50% ... (ok!?) ... 100% !!! Cool!!!!!
The phone restarts, then 2 minutes later, a little music!
But after 10 minutes, still no pin code screen. And the phone starts to warm up slightly.
I had a little hope, but there I am a little afraid ....
Rémi.

Hello!
Good news (little good news...)
I have download this file: H85030a_00_OPEN_EU_OP_0910.kdz
And now I have access to Fastboot!
But can not use adb (device not recognized). Recovery is not inaccessible either
Is possible, to reinstall recovery, with fastboot (and magicksu?) ?
Thank's for your help.

rsuinux said:
Hello!
Good news (little good news...)
I have download this file: H85030a_00_OPEN_EU_OP_0910.kdz
And now I have access to Fastboot!
But can not use adb (device not recognized). Recovery is not inaccessible either
Is possible, to reinstall recovery, with fastboot (and magicksu?) ?
Thank's for your help.
Click to expand...
Click to collapse
I continued my adventures!
I have flashed twrp-3.2.3.2.img with flashtool : with no error!
Now I have access to recovery twrp
I wiped the dalvik cache, and the data cache (only)
installed magicksu.zip
But reboot I come back every time on the recovery.
An idea to move on?

rsuinux said:
I continued my adventures!
I have flashed twrp-3.2.3.2.img with flashtool : with no error!
Now I have access to recovery twrp
I wiped the dalvik cache, and the data cache (only)
installed magicksu.zip
But reboot I come back every time on the recovery.
An idea to move on?
Click to expand...
Click to collapse
Run this piece of code in the TWRP terminal.
Code:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc

totalnoob34 said:
Run this piece of code in the TWRP terminal.
Code:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
Click to expand...
Click to collapse
Thank's for your reply.
what is this block/bootdevice/ and, why put these 256 bytes to zero?

Hello!
I took everything almost to zero!
Since I have access to recovery (and anyway, now, I boot all the time on it), I did this:
https://forum.xda-developers.com/lg-g5/development/stock-h850-30a-eu-rom-flashable-zips-t3850072
copy of the rom on the SD card,
copy of magisk on the map sd
installation of the rom
magisk installation
data format
reboot
----> back to recovery !!!
dd / dev / zero
reboot
-----> back to recovery !!!!
I am depressed...

hello!
It's good!!!!!
The G5 reborn!!!!!!
What I have done:
- flash H85030a_00_OPEN_EU_OP_0910.kdz with lgup
- flash twrp
- reboot in recovery
- flash H85030a_00_OPEN_EU_OP_0910.zip
- wipe/format data/cache/bin
- dd /dev/zero in misc and fota
reboot -> not working
- flash k2000 kernel
reboot -> not working
- dd /dev/zero in misc and fota
reboot -> not working
- reflash H85030a_00_OPEN_EU_OP_0910.kdz
and tadam!!!!!
I'm very happy!
Thank's all in the world!
Remi.

Related

Hangs on boot to recovery mode and normal mode [Solved! :)]

Hello people
I think my HTC Hero is what you call softbricked.
When I hold Home + Power on to go to recovery mode I get this single line of text:
Build : RA-hero-v1.5.2
If I hold Home and press power on the text disappears leaving an all black screen. Pressing home + power on again brings the text back.
When I boot normally it just keeps saying "Hero"
I think I did a full wipe, installed VillainROM 6.0.0 and then did a OTA update to VillainROM 6.1.0. I did notice the latest rom being rather slow and hanging sometimes. Then three days ago it froze. I pulled the battery and when I put it back in I was left with what I've described above.
Can't access VillainROM's official website
Another frustrating thing is that w w w. villainrom .co .uk has seemed down to me this whole softbrick-period. But they've announced a new version and no one have commented on their site being down. Apparently I'm the only one who can't access it.
Vol. down + power on
I've never used this boot mode. But it's the only one which seems to work.
HBOOT says Sd checking and all the tests results in:
No image! or No image or wrong image!
FASTBOOT just gives a red box with the white text FASTBOOT in it.
What can i do?
I did a nandroid backup before installing VillainROM 6.0.0 but I can't access recovery mode.
I would like to install the official 1.5 RUU-rom but HTC Sync can't find my phone, neither can adb shell.
I can insert the SD card in my computer and put an update.zip file in the root. Is this a solution? I don't know how to make the phone boot the update.zip file or how this works.
Sorry for this long post. I've been searching the web ever since thursday without any luck. So now I'm just putting all I've experienced out.
I hope someone can help me. I would be very glad
Alright, if you can get to the fastboot screen, this is what you should do:
Plug your hero in fastboot mode into a computer with the latest android sdk installed.
DL the latest recovery for your device: I don't think I can post links yet so search the forum for Amon RA's recovery (1.6.2) and place it in the tools folder of the sdk.
Then:
Open a command prompt (or terminal for linux, idk for mac)
Go to the tools folder with cd
(./)fastboot boot recovery-RA-hero-v1.6.2.img
(./ is for linux ^^,) And that should normally work
From there your best bet is to use Nandroid to recover one of your backups.
Thank you for your response
But I got an error:
Code:
C:\android-sdk-windows\tools\fastboot boot recovery-RA-hero-v1.6.2.img
downloading 'boot.img' ... FAILED (remote: not allow)
finished. total time: 0.010s
The site I downloaded the recovery image from suggestion this installation:
via fastboot + adb -> In case you don't have a custom recovery, so when you get signature fail errors
Code:
adb shell reboot bootloader fastboot boot recovery-RA-hero-v1.6.2.img adb shell mount /sdcard adb push recovery-RA-hero-v1.6.2.img /sdcard/recovery-RA-hero-v1.6.2.img adb shell flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img adb shell reboot
I've also tried this but it resulted in: error: device not found
I've noticed how my phone says "fastboot usb" when connected to my computer.
Re: Hangs on boot to recovery mode and normal mode
NessGuard said:
Thank you for your response
But I got an error:
Code:
C:\android-sdk-windows\tools\fastboot boot recovery-RA-hero-v1.6.2.img
downloading 'boot.img' ... FAILED (remote: not allow)
finished. total time: 0.010s
The site I downloaded the recovery image from suggestion this installation:
via fastboot + adb -> In case you don't have a custom recovery, so when you get signature fail errors
Code:
adb shell reboot bootloader fastboot boot recovery-RA-hero-v1.6.2.img adb shell mount /sdcard adb push recovery-RA-hero-v1.6.2.img /sdcard/recovery-RA-hero-v1.6.2.img adb shell flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img adb shell reboot
I've also tried this but it resulted in: error: device not found
I've noticed how my phone says "fastboot usb" when connected to my computer.
Click to expand...
Click to collapse
Have you flashed the official 2.1 rom thats been floating round?
Sent from my HTC Hero using Tapatalk
AndroHero said:
Have you flashed the official 2.1 rom thats been floating round?
Click to expand...
Click to collapse
No, I haven't.
Just now I did this:
Code:
C:\android-sdk-windows\tools\adb devices
List of devices attached
And none was shown...
Then I did:
Code:
C:\android-sdk-windows\tools\fastboot devices
HT97TL903447 fastboot
Is this some sort of serial number of my phone?
Re: Hangs on boot to recovery mode and normal mode
Your sd card is seen by your phone or not ?
sebxd said:
Your sd card is seen by your phone or not ?
Click to expand...
Click to collapse
How can I check this?
Hboot says Sd checking and all the tests results in:
Code:
No image! [I]or[/I] No image or wrong image!
The site isn't down, but some people can't get to it due to their DNS setup.
Use 8.8.8.8 and 8.8.4.4 to get it, or go to http://villainrom.grense.no/villainrom.co.uk to get in.
Re: Hangs on boot to recovery mode and normal mode
Mmm if i'm right you can't boot normaly ? It's strange..
Have you tried to boot without your sd card ?
I don't really know what the answer of fastboot means..
anon2122 said:
The site isn't down, but some people can't get to it due to their DNS setup.
Use 8.8.8.8 and 8.8.4.4 to get it, or go to
[url not allowed] to get in.
Click to expand...
Click to collapse
Thanks, but I think I will just stick to this forum. Hope I can get a solution
sebxd said:
Mmm if i'm right you can't boot normaly ? It's strange..
Have you tried to boot without your sd card ?
I don't really know what the answer of fastboot means..
Click to expand...
Click to collapse
Yes, I have tried booting without SD card and without simcard aswell. My simcard is now in a good old Nokia 3310
I have updated the radio earlier
A while ago I updated the radio to this version: 63.18.55.06JU_6.35.09.26
Is that an android 2.1-radio? And is that what's causing "not allow" when running fastboot flash?
What recovery image would I then be allowed to flash? An official one?
Or is it my bootloader (that's SPL, right?) that needs to be flashed to a version that allows the fastboot flashing?
I haven't been able to find a guide on flashing SPL on HTC Hero.
Is this the way to go?
Still need help or is this now sorted?....
It's now working
My phone is now working. I did the following:
1. Connected my phone to a computer with HTC Sync and drivers installed.
2. Started the bootloader on my phone (vol. down + power on, hold until bootloader starts).
3. Pressed back to start fastboot. It said fastboot usb because it was connected to my computer.
4. I tried to install an official 1.5 RUU rom. The phone responded and began the process. It cleared/deleted some caches/files or something. But then my computer and my phone said that the ROM installation had failed and that I should find the right rom.
5. Somehow this cleaned up the phone so I now could boot in recovery mode as I used to (I didn't try a normal boot, so can't say if that worked). I did a full wipe and flashed a custom rom (not VillainROM 6.0.0 ).
Even though VillainROM has made me sad I will now go for VillainROM 10.
Wish me luck
And thanks for your responses.
Brilliant. Just edit the title of your thread to put [SOLVED] on.
And good luck, but i'm sure you wont need it.
EDIT...... Excellent, done it already.
ddotpatel said:
EDIT...... Excellent, done it already.
Click to expand...
Click to collapse
Hehe, yes, even though it's my first post I am a little bit smart
Oh nice ! You have done it ! It is really smart indeed and I'm happy for you !
its not solved for my hero
i tried everything within last two days. but i havent succeess. (i tried your solition too)
i did nondroid backup and then restore. finaly my phone doesnt open.
and after i have given the same your errors (from adb and phone)...
but i havent success..
where i do wrong?
thanks...
Can you explain what you did, what are the errors and when does it appears please
EDIT...... Excellent, done it already.
Click to expand...
Click to collapse
Hehe, yes, even though it's my first post I am a little bit smart
Click to expand...
Click to collapse
Indeed. I'm sorry, I never meant to sound like an ass.
-------------------------------------
Sent via the XDA Tapatalk App

[Q] First bootloop, then stuck in CWM

I tired to restart phone after noticing that WI-FI isn't working (maybe my internet was laggy, don't know). After restarting phone was stuck on LG logo, i tried many times but again LG logo.
Then i started recovery, and wanted to flash some new ROM. But my CWM won't recoginze my SD card (to add, i wasnt using SD card with this phone). I tried other SD but problem stays. I google it and found out that maybe CWM needs update?
Version of CWM Recovery v6.0.3.1
This shows up when recovery starts..
E:Cant mount / cache/recovery/command
E:Cant mount / cache/recovery/log
E:Cant open / cache/recovery /log
E:Cant mount / cache/recovery/last_log
E:Cant open / cache/recovery/last_log
How to unbrick phone now?
Unfortunatly don't know what ROM was flashed before, or is bootloader unlocked or not. (coming from LG 3D, LG l9 was present. LG 3d methods for flashing is diffrent, so im little confused how to start anything now)
To add that phone now cannot turn on without charger pluged in. Powering on was OK in first few time...
First and important question. Did you unlock your booloader? If yes, you can install cutom roms. If not, you can't install custom roms.
Did you also try to enter SV mode?
1. Power off phone
2. Press and hold volume up
3. Connect phone by usb to PC
4. Wait few sec
5. SV mode should appear.
When you are in SV mode, you can restore stock rom by official LG program.
Rammar515 said:
First and important question. Did you unlock your booloader? If yes, you can install cutom roms. If not, you can't install custom roms.
Did you also try to enter SV mode?
1. Power off phone
2. Press and hold volume up
3. Connect phone by usb to PC
4. Wait few sec
5. SV mode should appear.
When you are in SV mode, you can restore stock rom by official LG program.
Click to expand...
Click to collapse
I started S/W upgrade, and in upper corner it says Bootloader Status: unlocked. So bootloader is unlocked for sure then..
If i manage to update CWM will that solve my problem with SD card? After that just to flash ZIP from recovery?
O something else?
ratluci said:
I started S/W upgrade, and in upper corner it says Bootloader Status: unlocked. So bootloader is unlocked for sure then..
If i manage to update CWM will that solve my problem with SD card? After that just to flash ZIP from recovery?
O something else?
Click to expand...
Click to collapse
I dont know but you should update cwm to 6.0.4.5+ After it you will be able to install all roms from 4.2-5.0.
Rammar515 said:
I dont know but you should update cwm to 6.0.4.5+ After it you will be able to install all roms from 4.2-5.0.
Click to expand...
Click to collapse
Thanks, now really noob question..
I googled how to update recovery on L9, and found methods with installing some APK, but as i cannot start system how to flash then?
There is 2 ways to install new recovery.
You can flash .zip in old recovery, reset phone and you will have new recovery.
You can also flash new recovery by fastboot. You need to have .img recovery.
Can you reset to fastboot in recovery options?
Rammar515 said:
There is 2 ways to install new recovery.
You can flash .zip in old recovery, reset phone and you will have new recovery.
You can also flash new recovery by fastboot. You need to have .img recovery.
Can you reset to fastboot in recovery options?
Click to expand...
Click to collapse
Not sure how to enter fastboot. Cannot see restart to fastboot in CWM..
You can try to enable adb in recovery and use command "adb reboot oem-unlock"
Rammar515 said:
You can try to enable adb in recovery and use command "adb reboot oem-unlock"
Click to expand...
Click to collapse
I cannot start fastboot, dont know how, something doing wrong. On CWM i only have, install zip with sideload (something like that)
Can i flash to stock rom from S/W menu? And what i need if can?
You need phone + usb + pc + lg flash tool (just download it) Connect your phone with SV mode and let program find rom, download and install it.
Rammar515 said:
You need phone + usb + pc + lg flash tool (just download it) Connect your phone with SV mode and let program find rom, download and install it.
Click to expand...
Click to collapse
Not sure what to try next.
I tried this http://forum.xda-developers.com/showthread.php?t=2085344 stays on 15%, and PC cannot see phone
this http://forum.xda-developers.com/showthread.php?t=2797190 , someone sad that this worked becaause first method didnt (was same problem as mine, how i understaned ..)
and tried this http://forum.xda-developers.com/showthread.php?t=2748384 , stuck after 6 sec (something like that). I readed that maybe BIN was corrupted (because of conversion from KDZ to BIN), now ill try with thid BIN http://uploaded.net/file/j32p8p7y/from/xh3dqq ...
What next.. S/W mode says Bootloader unlocked, and before all this phone was using JB..
I still didn't succeded to recover my phone.
My computer simply cannot see my phone, i tried all tools that were avalible. On 3% to 7% (on updating), just says that phone is not connected.
Strange thing is that i managed to flash V20H_00.kdz two times. Every single time i do the same but only that 2 times flash was successful. One time was with "offline method" and then with "LG flashtool 2014", after that flashing i got dead android with red triangle both times.
Then i wanted to flash v20c_00.kdz , but cannot pass 3% to 7% on flashing AGAIN. I'm frustrated !
I tried to flash on other computer but again, phone is not recognisable.
What to do now?
Can i flash ROM with fastboot ?
UPDATE.
I started upgrade recovery with LGMobile support tool, and finished flashing. But AGAIN i got dead android with red triangle!
Now what to try!?
Update
I even tried to flash ROM on WIN XP, but nothing. Again proces stops on 3% (then quckly) jump to 7%. And thats it.
Strange thing that when i start UPGRADE RECOVERY on Official LG TOOL (i think thats official), program download 500mb+ KDZ and process is successful, but i get Dead Android with red triangle..
Anyone have any advice? What to try?

Huawei MediaPad T1 S8-701u/S8-701w bootloder unlock TWRP recovery ROOT

Hi!
This is for Huawei Mediapad T1 S8-701w/u aka Mediapad T1 Honor.
As we all know this device has LOCKED bootloader and it is not rootable (only russsia firmware for s8-701u is)!
I am not responsible for bricks so procede at your own risk!
Read whole process before you begin.
First backup everything including internal SDcard!
1) This process will install factory unlocked ROM with just basic testing apps you will loose your curent ROM( we will return it on step 3)
Download: https://drive.google.com/file/d/0B7RlBIN4xO50RUxqU1E2ZGJmRUk/view?usp=sharing
Extract and copy dload folder do root of your removable sdcard (external sdcard)​Power off device​Hold volume down and turn on device​Wait till install process is done and device is booted again​
2) Install custom TWRP recovery
Connect device to computer (ADB, fastboot needed and drivers installed)​Download recovery.img from http://d-h.st/saW and copy to same folder with adb and fastboot​Type:
Code:
adb reboot bootloader
Once you are in bootloader (huawei logo) :​
Code:
fasboot flash recovery recovery2.img
When done reboot (hold power button) or:​
Code:
fastboot reboot
3) Now lets recover our original ROM:
Download rom for your device ( 701u or 701w)​Here are some links:​http://susutun1.blogspot.com/2014/08/android-firmware-huawei-s-series.html
http://forum.xda-developers.com/showpost.php?p=56376056&postcount=2
http://forum.xda-developers.com/showpost.php?p=57592296&postcount=20
http://forum.xda-developers.com/showpost.php?p=58036946&postcount=33
Here is western europe images for S8-701w I use this one
It is the best available firmware for 701w (also multilanguage)https://drive.google.com/file/d/0B7RlBIN4xO50QlFVSFZkWlhRX2c/view?usp=sharing
I can provide more firmwares but i have slow upload speed so I ask for someone here who can reupload them. I will send him link to inbox (limited download).
Extract UPDATE.app from firmware​Download Huawei extractor (windows tool)​http://forum.xda-developers.com/showthread.php?t=2433454
Open UPDATE.app with Huawei update extractor and extract SYSTEM.img and CUST.img (right click on images)​Copy SYSTEM.img and CUST.img to your fastboot folder​Reboot to bootloader​
Code:
adb reboot bootloader
Once you are in bootloader (huawei logo) :​
Code:
fasboot flash system SYSTEM.img
fasboot flash cust CUST.img
Turn device off and boot to recovery (hold vol down and turn on)​In recovery: Factory reset (format /data) and reboot.​
Done!!
If you get stuck in bootloder unable to boot in recovery:
flash and boot into stock recovery to clear bootloder flag
then you can flash TWRP again Here it is:http://d-h.st/in71 (stock recovery)
Code:
fastboot flash recovery stockrecovery.img
To ROOT flash http://download.chainfire.eu/supersu in recovery
Recovery: newest TWRP http://d-h.st/saW
BUGS:
Internal sdcard is mounted to /data/media, while on device /storage/emulated so use external SDcard.
Also because of wrong mounts when you do wipe it will delete everything on internal SDcard (only /data/media will stay)
TOUCH dont work when booted: just wait till screen off timeout (10s), then press power to turn screen on it will work now
Sorry for bad english!
Recovery downloads:
Version 1: http://d-h.st/JRp
Version 2:http://d-h.st/saW
Changelog: Fixed touchscreen issues!!​
Couldn't be better timing. Just received my 701w unit (Iskon HR)
Hi,
I did everything according to the instructions, but cannot enter the Custom Recovery. :crying:
I tried and CWM and TWRP.
ADB Tool shows that all goes well, but when I press any combination of buttons to enter the Recovery, Tablet enters in the bootloader ...
Now cannot install a different ROM, because it does not start Stock Recovery to initiate dload, it enters the bootloader and standing there.
Do you have any idea what to do ...?
Edit: From Now as soon as plug the USB cable Tablet lights up ...
Edit: Nothing deleted on the internal SD card... Still I can see my old files
darko150 said:
Hi,
I did everything according to the instructions, but cannot enter the Custom Recovery. :crying:
I tried and CWM and TWRP.
ADB Tool shows that all goes well, but when I press any combination of buttons to enter the Recovery, Tablet enters in the bootloader ...
Now cannot install a different ROM, because it does not start Stock Recovery to initiate dload, it enters the bootloader and standing there.
Do you have any idea what to do ...?
Click to expand...
Click to collapse
Can you explain what did you did last? Recovery, system, and cust images are flashed with fastboot in bootloader mode. There is only twrp recovery image here to download.
it Works
iodak said:
Can you explain what did you did last? Recovery, system, and cust images are flashed with fastboot in bootloader mode. There is only twrp recovery image here to download.
Click to expand...
Click to collapse
Thank you very much for your help in PM. With this Recovery2 in Post #2, Tablet works beautifully, and the entire process is quick and easy.
Root and TWRP Recovery I have, I can adjust the rest ... :laugh::good:
darko150 said:
Thank you very much for your help in PM. With this Recovery2 in Post #2, Tablet works beautifully, and the entire process is quick and easy.
Root and TWRP Recovery I have, I can adjust the rest ... :laugh::good:
Click to expand...
Click to collapse
Thanks for the info. I updated first post with more info on how to resolve issue if stuck in bootloader, unable to boot to recovery!
Now that we are unlocked we should make some presure (send emails) to Huawei to release kernel source!
It would be interesting to see is it somehow possible to flash 701w with 701u FW, because as I can see on my tablet, it seems that SIM connector is here, but filled with some kind of rubber sponge material.
It is posibble. Just use system and cust images from u version. I am not sure if the sim connector is in. Cant get that sponge out.
Edit: that factory unlocked update.app is from u version anyway
Edit2 I think that all roms are similar they just disabled some stuff for wifi version with config files.
like /cust/channel/*/prop/local.prop
ro.config.wifi.only=true
iodak said:
I am not sure if the sim connector is in. Cant get that sponge out.
Click to expand...
Click to collapse
Is there any link to see how to disassemble this tablet?
It would be much easier to put the sponge out with removed back plate.
Viper4Android
Thanks to iodak i rooted my tablet,everything works perfectly,but i cant install viper4Android...driver not install because busybox not work or i am not have fully rooted device..Viper4Android that say...Any solution?
gogy3d said:
Thanks to iodak i rooted my tablet,everything works perfectly,but i cant install viper4Android...driver not install because busybox not work or i am not have fully rooted device..Viper4Android that say...Any solution?
Click to expand...
Click to collapse
I installed Busybox after I turned off "Mount namespace separation" in SuperSu
---------- Post added at 05:16 PM ---------- Previous post was at 05:04 PM ----------
there was a problem: as soon as I push cable in tablet, from the charger or computer, tablet turn on, although previously it was switched off. Now I can not recharge when tablet is switched off, just when he is turned on...
I didn't do offline charging. I will see what i can do. That is not really a problem.
darko150 said:
I installed Busybox after I turned off "Mount namespace separation" in SuperSu
---------- Post added at 05:16 PM ---------- Previous post was at 05:04 PM ----------
there was a problem: as soon as I push cable in tablet, from the charger or computer, tablet turn on, although previously it was switched off. Now I can not recharge when tablet is switched off, just when he is turned on...
Click to expand...
Click to collapse
Me too---there is a problem offline charging,they not there.. i turn cable in charger tablet is turn on,only online charging,why?
iodak said:
I didn't do offline charging. I will see what i can do. That is not really a problem.
Click to expand...
Click to collapse
The truth is, this is not a problem, but it is unusual ...
darko150 said:
The truth is, this is not a problem, but it is unusual ...
Click to expand...
Click to collapse
Same here.Im unable to load recovery unless i use ADB command on PC???
Any help?
Vol down when powering on will get you to recovery.
Also in terminal emulator app
su
reboot recovery
I have to hold the buttons Power and Vol- right up to the moment when it appears Huawei logo. Then go into TWRP Recovery.
If I let a moment sooner or later, can not enter the recovery.
Although there are small imperfections, I'm very satisfied, thanks IODAK :good:
I use https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot&hl=hr quickboot to go in recovery.App needs root.
Or use standard procedure hold vol- power on...
Who knows when is build custom rom for S8-701W?

Doogee F7 stuck in bootloop after root attempt

Hi,
I'm new here, so please excuse me if I am posting in the wrong category.
So I tried to root my Doogee F7 (not the pro version) using fastboot and TWRP, and it resulted in a sort of bootloop where it says:
Code:
Orange State
Your device has been unlocked and can't be trusted
Your device will boot in 5 seconds
And then it restarts and gives the same message again. This loop has been going on for some time and I can't stop it because the phone has a non-removable battery and I have tried every possible combination of buttons (i.e. Power + Volume Down + Volume Up).
The process I used in my attempt to root was as following:
1. I used
Code:
adb reboot bootloader
to go into fastboot. (I already set up everything like USB debugging and OEM unlocking in the developer options)
2. I then used
Code:
fastboot oem unlock
and pressed Volume Up to unlock the bootloader. All was successful.
3. I then tried to flash TWRP to recovery and I believe this is where everything went wrong. I flashed it using
Code:
fastboot flash recovery recovery.img
and it was successful, according to the command prompt:
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery "C:\Users\momen\Downloads\recovery (1).img"
target reported max download size of 134217728 bytes
sending 'recovery' (12832 KB)...
OKAY [ 0.562s]
writing 'recovery'...
OKAY [ 0.213s]
finished. total time: 0.779s
4. After it finished I used
Code:
fastboot reboot
to reboot the phone and that's when it got stuck.
At the moment I am just letting my battery run out, as I have no other way of turning off the phone, and neither adb nor fastboot is working.
I don't really know if my device was even supported, but I followed the instructions on various websites stating that I should first unlock my bootloader, then flash TWRP, then flash superSU onto it, and my phone would be rooted. I used the latest TWRP image, and I think that was where I went wrong. Is there anything I can do to get my phone to work again?
Hey! i´m sorry for your phone, can you tell me any updates, is it fixed now? what happened? i am about to do the same process to root my Doogee F7 and i´m very worried that my phone gets bricked, so please, i need your recommendations.
I hope everything is alright with your phone.
solartediego said:
Hey! i´m sorry for your phone, can you tell me any updates, is it fixed now? what happened? i am about to do the same process to root my Doogee F7 and i´m very worried that my phone gets bricked, so please, i need your recommendations.
I hope everything is alright with your phone.
Click to expand...
Click to collapse
Ah yes, sorry for not updating. I managed to connect my phone to my PC again using the flash tool and then I could flash the original ROM back onto it. I found the ROM by Googling for a bit tho I dont have a link. Be aware that if you do this, it basically factory resets your phone, locking your bootloader again and all. If you do manage to root your phone please contact me as I still have not managed to do so.
Edit: This process of flashing back your ROM always works as long as your phone powers on, so don't worry too much about bricking your phone. I think I've bricked my phone over 20 times trying to root it, and it worked every single time.
Hello there. I suggest that you use "fastboot boot recovery.img" than using "fastboot flash" if you are not sure if the custom recovery works (or if you just want to test/try it). In this way, you'll just boot the custom recovery temporarily (and your stock recovery is still in tacked).
For rooting your device, first you'll need a working custom recovery for your device (you used TWRP, very first if it works or compatible with your device).
Insyder28 said:
Ah yes, sorry for not updating. I managed to connect my phone to my PC again using the flash tool and then I could flash the original ROM back onto it. I found the ROM by Googling for a bit tho I dont have a link. Be aware that if you do this, it basically factory resets your phone, locking your bootloader again and all. If you do manage to root your phone please contact me as I still have not managed to do so.
Edit: This process of flashing back your ROM always works as long as your phone powers on, so don't worry too much about bricking your phone. I think I've bricked my phone over 20 times trying to root it, and it worked every single time.
Click to expand...
Click to collapse
Hi.How you actually managed to connect your phone to PC using flash tool if you were in a bootloop and had no access to fastboot mode or recovery?
ciubsy2004 said:
Hi.How you actually managed to connect your phone to PC using flash tool if you were in a bootloop and had no access to fastboot mode or recovery?
Click to expand...
Click to collapse
Im interested too in your process to flash TWRP again, as i am in the same boot loop than you with a Doogee S60. I´ve waited till the battery ended, but now flash tool doesn´t recognize my phone. If i charge the battery, i get a boot loop again..
TheBidan said:
Im interested too in your process to flash TWRP again, as i am in the same boot loop than you with a Doogee S60. I´ve waited till the battery ended, but now flash tool doesn´t recognize my phone. If i charge the battery, i get a boot loop again..
Click to expand...
Click to collapse
I have managed to get the flash tool recognizing my phone.Had to keep pressed volume up,if i recall properly(or try volume down) before connecting usb cable to phone with flash tool opened and . It was a while ago though and i can't remember exactly which key was for sure. Hope this helps

Honor 7 bricked after Root - Rescue mode and Recovery OK but no access to disk

Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
samhot66 said:
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
Click to expand...
Click to collapse
You didnt make any twrp backup??
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Rayan19997 said:
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Click to expand...
Click to collapse
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
samhot66 said:
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
Click to expand...
Click to collapse
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
I'm glad to see that you succeeded bro :cyclops:
how can u flash with fastboot while no connection to pc
samhot66 said:
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
Click to expand...
Click to collapse
how can u flash with fastboot while no connection to pc (as u said earlier)
if u did manage to connect to pc, please share how
thanks in advance
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
samhot66 said:
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
Click to expand...
Click to collapse
Read this carefully, this will restore youre phone:
1*.)No matter what youve done with this phone it will be cleanly installed like its fresh new, cause i had couple of problems and this method worked
1.)Download the latest b396 firmware
2.)format youre SD card with basic settings via Windows ( if you have a usb stick to connect youre SD card to computer like i do, if you cant connect youre SD card to computer, use another smartphone and format youre SD card with basic settings)- simply talking just format youre SD card
3.)create --->>>dload<<<--- folder like i wrote down without the --->>><<<--- stuff on youre SD card
4.)paste the update.app file to the dload folder
5.)insert youre SD card to phone
6.)this is the moment of truth hold down volume + & - key and power key all in once until the emui logo appears WARNING: remove all keys after logo appearing WARNING: if the logo doesnt appear even after 30sec. keep still holding until the logo appears
***If you get somekind of error i can help, if it worked youre a lucky guy

Categories

Resources