Related
Hey all
First off id like to say thanks for looking and helping
I recently updated my phone to the ICS (official) via the OTA update and i found i could NOT install 3rd party versions of software
So i rebooted into odin mode where i then installed the rom i origanaly had then it got stuck at the boot screen with the yellow triangle
So i rebooted into ODIN and re flashed to the origanal XWKF3 i origanaly used
Then i rebooted to the recovery mode then tried to install the rom (update.zip) and it errors saying E:failed to verify whole-file signiture. and E:Signiture verifacation failed, Installation FAILED
It wont no matter what i do play ball so here it is WHAT CAN I DO besides throw it against a wall verrrrrry f in g hard and hope it smashes into millions of lille bits .....
It is making me ill i tell ya
So if anyone can help it would be so appreciated and i would donate £20 to there happy funds they can buy a case or something nice with ........
EDIT:: now it wont respond to ODIN odin sees it but sticks at setting up connection then fails
Also when starting ODIN mode on the phone it says ODIN MODE , PRODUCT NAME SHG-I777 (this was one of the roms i tried) and wont change no matter what rom i try... custom binary says YES (9 counts) CURRENT BINARY: CUSTOM
cheers again
Can't you skip signature verification in CWM. also did you do a band backup before updating. Strange issue you have.
Sent from Atrix 4g Neutrino 2.5p
Hi thanks for replying
I mostly have to get to the recovery from S2 root software and i have to have an unsecure tar rom installed.....
I cant boot into CWM i can only boot into there boot recovery the only options in there are
ANDROID systerm recovery <3e>
Enter: ok key, select :vol up / vol down
reboot system now
apply update from sd card (this is where i get the signiture errors)
wipe data/factory reset
wipe cache partition
thats it
What version of the sgs2 do you have? You may have flashed a ROM for the wrong model.
Sent from my GT-I9100T using XDA
I only wish i knew i thought it was the I9100 with XWKF3 tar but i am obviosly wrong and all the kernels in XDA links dont work so cant get the uk o2 ones
Is there anyway of finding out withought having to have a working phone ie through the serial etc..
It is an unlocked phone
I have it on o2 and it is british not imported
Cheers i wish i was clued up about this
The first time i rooted it when i got it it all worked well no problems and i then flashed back to the origanal rom and it worked well got all updates and was still rooted
After ICS i see i could not install some apps i had so i flashed a new insacure rom and thats where it all began
IS IT BRICKED SHOULD I SELL IT AS FAULTY
No, as your phone still turns on.
First boot back into the recovery you have now, and factory reset and wipe the cache.
Then to revert back to stock head over to the galaxy s2 forums, then into original Android development, then head into the official firmware page, and flash one of the firmwares listed there with Odin.
Hope that helps
Sent from my GT-I9100 using XDA
I will try this right now and if it works i am going to transfer 20 pound to you sir
Thanks for the support.
This is the one you ment if so all the links are dead http://forum.xda-developers.com/showthread.php?t=1075278
thats the one i tried many timmes already
nutzrutz said:
I will try this right now and if it works i am going to transfer 20 pound to you sir
Thanks for the support.
Click to expand...
Click to collapse
Try to reflash again
Sent from my GT-S5830 using xda premium
thnx but I don't want the money, just looked like you needed some help
Sent from my GT-I9100 using XDA
carbonos1 said:
thnx but I don't want the money, just looked like you needed some help
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1075278 Links are all dead.. is there anywere else i can find them.?
EDITs the root version that is currently on it is LINUX VERSION 2.6.35.7-I9100XWKF3-CL276555 ([email protected]) (gcc version 4.4.0 (GCC) #2 SMP PREEMPT thu jan 9 18:28:28 KST 2011
Prog used to root is S2 root
Unfortunately no, but mirror 2 on xxlpq in fact does work, I'm downloading it now
Sent from my GT-I9100 using XDA
Hello there,
Here are the steps that might help you.
1. Download ODIN from attachment.
2. Download CM9 Resurrection Edition for use with Odin from below URL.
cm-9-20120330-ODIN-galaxys2.tar.md5
3. Power off your phone.
4. Press Volume Down + Home Button + Power Button simultaneously to enter into download mode.
5. When you're in Download Mode, start the ODIN you've downloaded from attachment and connect your phone to Computer.
6. Let ODIN detect your device and select the downlaoded tar.md5 file in PDA section and click on Start button.
7. If everything is fine, ODIN will install the CM9 ROM in your phone.
8. After the process is complete, disconnect the phone and wait for it to boot.
9. After successful booting up, you may stick with that build or install the latest version of CM9 from below link.
update-cm-9-20120331-CODEWORKX-galaxys2-signed.zip
10. Just put above mediafire file in your SD Card.
11. Boot your phone in Recovery mode from your OS, Wipa data, cache, dalvik-cacke, battery stats
12. Format /system
13. Install zip file from SD card and select the downloaded file from mediafire, install it and reboot after successful installation.
14. You may optionally install GAPPS from recovery by downloading it here.
Let me know how it goes.
chiaotzu said:
Hello there,
Here are the steps that might help you.
1. Download ODIN from attachment.
2. Download CM9 Resurrection Edition for use with Odin from below URL.
cm-9-20120330-ODIN-galaxys2.tar.md5
3. Power off your phone.
4. Press Volume Down + Home Button + Power Button simultaneously to enter into download mode.
5. When you're in Download Mode, start the ODIN you've downloaded from attachment and connect your phone to Computer.
6. Let ODIN detect your device and select the downlaoded tar.md5 file in PDA section and click on Start button.
7. If everything is fine, ODIN will install the CM9 ROM in your phone.
8. After the process is complete, disconnect the phone and wait for it to boot.
9. After successful booting up, you may stick with that build or install the latest version of CM9 from below link.
update-cm-9-20120331-CODEWORKX-galaxys2-signed.zip
10. Just put above mediafire file in your SD Card.
11. Boot your phone in Recovery mode from your OS, Wipa data, cache, dalvik-cacke, battery stats
12. Format /system
13. Install zip file from SD card and select the downloaded file from mediafire, install it and reboot after successful installation.
14. You may optionally install GAPPS from recovery by downloading it here.
Let me know how it goes.
Click to expand...
Click to collapse
Thanks so much for them i got them BUT now ODIN says ADDED and when i load kenel into PDA then click start it just hangs and does not flash
IT DID PREVOIUS BUT NOW IT WONT FLASH do i add the pit file that was iincluded in the odin download i got from you as i am going to try that next
nutzrutz said:
Thanks so much for them i got them BUT now ODIN says ADDED and when i load kenel into PDA then click start it just hangs and does not flash
IT DID PREVOIUS BUT NOW IT WONT FLASH do i add the pit file that was iincluded in the odin download i got from you as i am going to try that next
Click to expand...
Click to collapse
No, don't add that PIT file. Just post the log messages from ODIN.
EDIT:
Also try following things:
1. Make sure you're in download mode and your screen shows "Downloading..." text.
2. Take out your battery for 5 minutes and put it back.
3. See if the phone charges in power off mode. If yes, make sure it's charged enough, at least 30%.
4. Can you go into Recovery mode? Try pressing Volume Up + Home Button + Power Button simultaneously to enter into recovery mode. If you're able to get into recovery mode, you can flash the update-cm-9-20120331-CODEWORKX-galaxys2-signed.zip file from there. See if that works for you.
5. Possible post a screenshot of ODIN where it's stuck.
chiaotzu said:
No, don't add that PIT file. Just post the log messages from ODIN.
EDIT:
Also try following things:
1. Make sure you're in download mode and your screen shows "Downloading..." text.
2. Take out your battery for 5 minutes and put it back.
3. See if the phone charges in power off mode. If yes, make sure it's charged enough, at least 30%.
4. Can you go into Recovery mode? Try pressing Volume Up + Home Button + Power Button simultaneously to enter into recovery mode. If you're able to get into recovery mode, you can flash the update-cm-9-20120331-CODEWORKX-galaxys2-signed.zip file from there. See if that works for you.
5. Possible post a screenshot of ODIN where it's stuck.
Click to expand...
Click to collapse
Ok phone is off battery is out for a min or 10 then i will put it back in n try odin then if still not playing fair i will do it the other way.
I take it you ment put that file on my micro sd card yes then install
when i try this before it gives me two red error lines about signiture verification
IS DOING IT NOW EDIT EDIT EDIT just waiting for flash to finish IF THIS WORKS GIVE ME A PAYPAL ACCOUNT MATE YOU DESERVE A DRINK ON ME BIG TIME
I love you
YOU MY FRIEND ARE THE GREATIST PERSON ALIVE I LOVE YOU HAHAHAHAHA (in a non gay way)
IT IS ALIVE
ALIVE I TELL YOU I OWE YOU BIIIIIIIIIIG TIME please let me transfer 20 into an paypal account i only need a email address linked to it
Please accept all my gratitude
You saved me hundreds in gettin a new phone the the galaxy note looks nice......
nutzrutz said:
YOU MY FRIEND ARE THE GREATIST PERSON ALIVE I LOVE YOU HAHAHAHAHA (in a non gay way)
IT IS ALIVE
ALIVE I TELL YOU I OWE YOU BIIIIIIIIIIG TIME please let me transfer 20 into an paypal account i only need a email address linked to it
Please accept all my gratitude
You saved me hundreds in gettin a new phone the the galaxy note looks nice......
Click to expand...
Click to collapse
Congrats man for getting the device back. I'm glad that worked out for you. Check your Inbox for the message.
---------- Post added at 07:29 PM ---------- Previous post was at 07:00 PM ----------
Thanks a lot for the donation man! More than you mentioned actually. You can always count on me for any help in future.
One more thing b4 i go
Is there a reason its not connecting to Keis now
Is it the rom etc stopping it or is it something else do you recon ?
Shows up ok in my computer but when i start keis it just continusly try to connect
If not can i transfer my contacts .spb file on the sd card and update there somehow
nutzrutz said:
Is there a reason its not connecting to Keis now
Is it the rom etc stopping it or is it something else do you recon ?
Shows up ok in my computer but when i start keis it just continusly try to connect
If not can i transfer my contacts .spb file on the sd card and update there somehow
Click to expand...
Click to collapse
Right now, you've installed CyanogenMod ROM of Ice Cream Sandwich 4.0 version of Android. It doesn't have Kies in it as it's a version from google, more clean and bloatware free. If you want, you can go back to Samsung Version to use Samsung Kies. All you need to do is to download and follow the instructions from following thread:
http://forum.xda-developers.com/showthread.php?t=1544487
Alternatively, here are instructions to import it into without Kies.
there is one way i found
1. open Kies
2. open your last saved *.spb file
3. save the file again as *. vsf manually in the file name area
4. go to were normally saved spb files ( C:\Users\ _\Documents\samsung\Kies\PIMS)
5. you will find all the contacts saved as vsf file.
6. select all contacts and copy them in a directory (ontacts)
7. connect your samsong to the pc and copy the directory (cotacts) in to the sd card
8. disconect your samsong
9. select the contact icon
10. from the left key press and select import contact from sd
job done
Click to expand...
Click to collapse
Source: http://forum.xda-developers.com/showpost.php?p=15447202&postcount=4
PS: I suggest you to save all your contacts to Google that way you don't have to backup them everytime you format your device.
Will do it the 2nd way as i am happy with the software on it now
I thought i had synced them with google but am not sure how to get them back
Hello i just upgraded my phone to 4.1.2 jelly bean official rom by changing my css to Fop and my device auto updated,My problem now is that i want to root my phone ,i did some search in the google and i found :
Extract Odin zip file and you will get Odin3 v3.07.exe.
Power off your phone. Wait 5-6 seconds to confirm complete switch off.
Now, put the Galaxy S2 I9100 phone in Download Mode by pressing pressing and holding down the Volume Down and Home buttons while pressing the Power button. A screen will come up; press Volume Down key to continue to enter Download Mode.
Now run Odin3 v3.07.exe (see Step 2) as an Administrator because Admin privileges is required to complete the process smoothly.
Now connect your Galaxy S2 I9100 with your PC using USB cable. A message will appear under Odin’s message box in the bottom left saying “Added!!”. If you don’t get it, then try another USB port. If that too doesn’t work, then reinstall the USB driver. If you successfully see the “Added!!” message in Odin, you are good to go. Also, check for COM port with a number in Yellow to make sure that you have successfully added your device.
Select these files in Odin at respective button:
Click the PDA Button, and select the Siyah-s2-v6.0b4.tar file.
In Odin window, make sure Auto Reboot and F. Reset Time checkboxes are selected.
Double check everything. Hit the START button to begin the flashing process.
Once the flashing process is completed, the tablet will reboot automatically and you will see a PASS message in the top-left-most box. You can now unplug the USB cable to disconnect your device from computer.
Your Galaxy S2 I9100 running XWLSD Android 4.1.2 Jelly Bean firmware is now rooted. If there are any issues, feel free to post in the comments section for our staff to take a look at it.
Click to expand...
Click to collapse
Is this the correct method of how to root my phone?Will i have that annoying triangle every time the phone starts?And last but not least is there any danger of bricking my phone?
solton57010 said:
Hello i just upgraded my phone to 4.1.2 jelly bean official rom by changing my css to Fop and my device auto updated,My problem now is that i want to root my phone ,i did some search in the google and i found :
Is this the correct method of how to root my phone?Will i have that annoying triangle every time the phone starts?And last but not least is there any danger of bricking my phone?
Click to expand...
Click to collapse
see below
works for me.. thank you so much
Why am saying that ?? Because is wont even open ..i connect it to the pc i can here the beeps but nothing works...anyone can help me :/
samsung galaxy s 3 progree
scl21 model
au kddi
bboydude said:
Why am saying that ?? Because is wont even open ..i connect it to the pc i can here the beeps but nothing works...anyone can help me :/
samsung galaxy s 3 progree
scl21 model
au kddi
Click to expand...
Click to collapse
Can you get into recovery mode (power off hold power, home, volume up at the same time) or download firmware mode? (same thing except you hold volume down instead of volume up.)
AppleCultApostate said:
Can you get into recovery mode (power off hold power, home, volume up at the same time) or download firmware mode? (same thing except you hold volume down instead of volume up.)
Click to expand...
Click to collapse
no i cant do anything
bboydude said:
no i cant do anything
Click to expand...
Click to collapse
I hear rumors you can force yourself into download mode by taking out the battery, holding power, home, and volume down and keep holding them while inserting the battery. Try that and tell me what happens. If you get into download mode then I'll tell you the next steps. If not please provide more detail on what exactly happens.
GT-I9300 Bricked
AppleCultApostate said:
I hear rumors you can force yourself into download mode by taking out the battery, holding power, home, and volume down and keep holding them while inserting the battery. Try that and tell me what happens. If you get into download mode then I'll tell you the next steps. If not please provide more detail on what exactly happens.
Click to expand...
Click to collapse
Hello, I bricked my GT-I9300 and now I can only get into the download mode. Can you please tell us what to do from here..? Mine was/is
Baseband Version I9300 XXLEF
Build Number IMM76D. I9300 XXALEF
Version 4.0.4
Kernel Version: 3.0.15-554452-user
Am located in France.
I'd really appreciate your help..!
Thanks..!
hydenm said:
Hello, I bricked my GT-I9300 and now I can only get into the download mode. Can you please tell us what to do from here..? Mine was/is
Baseband Version I9300 XXLEF
Build Number IMM76D. I9300 XXALEF
Version 4.0.4
Kernel Version: 3.0.15-554452-user
Am located in France.
I'd really appreciate your help..!
Thanks..!
Click to expand...
Click to collapse
You'll have to search the internet for a stock ROM for your exact model. (Finding ROMs can be hard but I suggest you start with searching this website first. Theres a lot of forums here were people leak ROMs) You'll know you have the right one when it's a compressed file that contains 4 files that begin with the prefixes BL, AP, CP, and CSC. Once you have the ROM you'll need a windows computer and download odin 3.09. Once Odin is downloaded, run it as administrator. Click the AP button and put the AP file in, click the CP button and put the CP file in, and, click the CSC button and put the CSC file in. (Leave the BL one alone, thats only for special circumstances.). Make sure only the checkboxes auto reboot and F reset time are marked. Then put your phone in download mode, plug it in, make sure the console in odin says "added", and click the start button in OdIn and wait until your phone reboots and your phone will be back the way it was out of the factory. (Note: Won't reset Knox.)
???
AppleCultApostate said:
You'll have to search the internet for a stock ROM for your exact model. (Finding ROMs can be hard but I suggest you start with searching this website first. Theres a lot of forums here were people leak ROMs) You'll know you have the right one when it's a compressed file that contains 4 files that begin with the prefixes BL, AP, CP, and CSC. Once you have the ROM you'll need a windows computer and download odin 3.09. Once Odin is downloaded, run it as administrator. Click the AP button and put the AP file in, click the CP button and put the CP file in, and, click the CSC button and put the CSC file in. (Leave the BL one alone, thats only for special circumstances.). Make sure only the checkboxes auto reboot and F reset time are marked. Then put your phone in download mode, plug it in, make sure the console in odin says "added", and click the start button in OdIn and wait until your phone reboots and your phone will be back the way it was out of the factory. (Note: Won't reset Knox.)
Click to expand...
Click to collapse
I've downloaded a bunch of ROM (no idea which is for my exact model), flashed everyone of them and nothing works. Odin tells me a lot of times "no Pit-partition". When I get into download mode... PRODUCT NAME: (nothing there), CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official, SYSTEM STATUS: Custom
Is this phone dead until the Second Coming or is it possible to resurrect it before that..? Any ideas...? :fingers-crossed: Thanks..!
hydenm said:
I've downloaded a bunch of ROM (no idea which is for my exact model), flashed everyone of them and nothing works. Odin tells me a lot of times "no Pit-partition". When I get into download mode... PRODUCT NAME: (nothing there), CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official, SYSTEM STATUS: Custom
Is this phone dead until the Second Coming or is it possible to resurrect it before that..? Any ideas...? :fingers-crossed: Thanks..!
Click to expand...
Click to collapse
In that case, you may need to find a .pit file for your phone and put it in the pit slot along with the AP, CP, and CSC and check the option re-partition along with the auto reboot and f. reset time. Make sure ODIN is ran as administrator when doing this. Proceed with extreme caution when doing this. I am not responsible for anything that happens.
AppleCultApostate said:
You'll have to search the internet for a stock ROM for your exact model. (Finding ROMs can be hard but I suggest you start with searching this website first. Theres a lot of forums here were people leak ROMs) You'll know you have the right one when it's a compressed file that contains 4 files that begin with the prefixes BL, AP, CP, and CSC. Once you have the ROM you'll need a windows computer and download odin 3.09. Once Odin is downloaded, run it as administrator. Click the AP button and put the AP file in, click the CP button and put the CP file in, and, click the CSC button and put the CSC file in. (Leave the BL one alone, thats only for special circumstances.). Make sure only the checkboxes auto reboot and F reset time are marked. Then put your phone in download mode, plug it in, make sure the console in odin says "added", and click the start button in OdIn and wait until your phone reboots and your phone will be back the way it was out of the factory. (Note: Won't reset Knox.)
Click to expand...
Click to collapse
Hi, I've done that with several ROM's to no avail. How would I know which ROM is the right one other than just prefixes..? Also, many times when I try via Odin I get a No PIT partition from Odin. I'm lost...
How to Root Galaxy Star pro GT-S7262
using prerooted firmware
http://www.youtube.com/watch?v=ulXHTeUGbfU
1- Enter your phone into Download Mode by pressing ( Volume down key + Home key + Power key ).
2- Open Odin.
3- Download this file http://goo.gl/HNDNkh and extract it.
4- Put the file in the PDA and press start.
5- After flash finish the phone will restart.
6- Open the SuperSu app and press (Continue) then (Normal).
7- The phone now rooted
P.C : This ins't my firmware and I dont know the developer, do it on your risk.
The Prerooted firmware: http://goo.gl/HNDNkh
The Odin: http://goo.gl/0Xdr55
Twitter: https://twitter.com/traien
Email: [email protected]
XDA:DevDB Information
Samsung Galaxy S7262 prerooted firmware, ROM for the Samsung Galaxy Star
Contributors
en.osama
ROM OS Version: 4.1.x Jelly Bean
Version Information
Status: Testing
Created 2014-11-08
Last Updated 2014-11-08
my phone is trash
Luthfi Dimaz said:
Click to expand...
Click to collapse
help pleasse my phone now is a trush after i fla**** with yours prerooted firmware he doesn't boot up or do nothind please reply me :crying:
bamostta said:
help pleasse my phone now is a trush after i fla**** with yours prerooted firmware he doesn't boot up or do nothind please reply me :crying:
Click to expand...
Click to collapse
why you ask me ? ask to own thread
Bricked screen blank issue is solved
Dear user, i faced same issue. After flashing this rom i thought the phone is bricked, but actually the screen was not displaying any content of this ROM's OS. I came to know this when i switched on and heard the booting sound of samsung. The solution for that is you flash the original firmware through ODIN. Please follow these steps.
1. Remove your battery, and apply it again in device
2. Now press Home + Power button + Volume down button for some time then release all buttonn and press Volume up button. (I am sure the screen will be blank and you will not aee anything, but in background it will work and take you to Odin Download mode if you know how to take your device in ODIN mode to flash firmwares. It will be completely guesswork to take your Mobile in ODIN mode if you know exact seconds for how long u need to press Home + Power + Volume Down button and release them)
3. Now start ODIN program on computer and connect your mobile with USB cable to your computer, your ODIN user interface will show "Added" dialogue message. That means your mobile is in ODIN mode and ready to flash.
4. Now flash your original firmware through PDA option.
And yes, i made my phone working in same way. I am sure your phone will work again too. Its tested by me. For any further queries email me on [email protected]
Hello everyone,
I searched a lot for my problem but couldn't find any solution so I decided to post here...
I tried to update my mothers Galaxy A10s officially from the settings but after restarting and booting to blue screen which it shows percentage of installing update , install goes until 99% then it shuts down and doesn't boot up when I hold power button , I tried every combination like power + volume down or volume down then power button and etc. only the power button + volume up works which it boots the installing screen and same happens , 99% and shuts down!
I installed samsung usb driver and odin then I connected the phone holding volume up and down , the download screen for firmware shows up successfully , but here is my question , is there any way that I can update the phone without losing data on it? I'm pretty sure that the downloaded update on phone is corrupt , is there any way to replace it from computer and let it update normally?
data on the phone are really important to my mother and if I flash the phone , they are lost! so please let me know if there is any way to fix this issue , thanks
hi i encountered exactly this same issue, could you elaborate a bit more how to get the download screen for firmware? while i'm worried about data loss as well, i rather have a working phone.
fuseteam said:
hi i encountered exactly this same issue, could you elaborate a bit more how to get the download screen for firmware? while i'm worried about data loss as well, i rather have a working phone.
Click to expand...
Click to collapse
First download your phones USB driver , you can simply search Samsung Galaxy A10s USB driver in google ,
To make sure your phone is connected to your pc correctly you can also download Odin ,
Connect your phone to you PC while holding Volume up + Volume down at the same time , it should boot up to Download screen asking you to continue or restast by volume up and down ,
As I found other ppl in other threads in this forum also having same issue in recent days , seems the update package from samsung was corrupt and there is no samsung tech support in my area
yeah same here no samsung tech support as far as i know
thanks
the device is also not my device and not in my possesion so i'll need to pass along the information to a less tech savy person. i hope i don't send the wrong links
fuseteam said:
yeah same here no samsung tech support as far as i know
thanks
the device is also not my device and not in my possesion so i'll need to pass along the information to a less tech savy person. i hope i don't send the wrong links
Click to expand...
Click to collapse
Download Samsung Galaxy A10s USB Driver | All USB Drivers
Download Samsung Galaxy A10s USB Driver from here, install it in your computer and connect your device with PC or Laptop successfully.
allusbdrivers.com
skysheykh said:
Download Samsung Galaxy A10s USB Driver | All USB Drivers
Download Samsung Galaxy A10s USB Driver from here, install it in your computer and connect your device with PC or Laptop successfully.
allusbdrivers.com
Click to expand...
Click to collapse
thanks much appreciated, i'm guessing this is the official site for odin? https://odinflashtool.com/
fuseteam said:
thanks much appreciated, i'm guessing this is the official site for odin? https://odinflashtool.com/
Click to expand...
Click to collapse
I'm not sure but looks legit
skysheykh said:
I'm not sure but looks legit
Click to expand...
Click to collapse
use this one
odin3 v3.14.1 patched.zip | by kushpr for Galaxy A32 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Hey Guys this fix is really simple but will not retain any data unless if you have a backup first step is to install ssung drivers to your pc. 2 Download latest version odin https://odin-samsung.com/odin-3-14-4-odin-download-all-versions-for-samsung-flash.html
3 Download A10S Firmware Binary 5 SM-A107F https://samfw.com/firmware/SM-A107F
SM-A107M https://samfw.com/firmware/SM-A107M
Download version the first version Binary 5 fiware
3 extract firmware
4 Load onto odin BL, AP, CP, CSC
5 HOLD VOLUME + & - TOGETHER AND PLUG IN USB CABLE CONNECT TO YOUR PC DOWNLOAD MODE WILL COME UP VOLUME UP TO CONTINUE AND ID COM PORT WILL BE ADDED ON ODIN
6 Press Start and Flash
7 Setup device and Enjoy PLEASE DO NOT ALLOW UPDATES TO INSTALL UNLESSS SAMSUNG FIXES THE UPDATE.
skysheykh said:
Hello everyone,
I searched a lot for my problem but couldn't find any solution so I decided to post here...
I tried to update my mothers Galaxy A10s officially from the settings but after restarting and booting to blue screen which it shows percentage of installing update , install goes until 99% then it shuts down and doesn't boot up when I hold power button , I tried every combination like power + volume down or volume down then power button and etc. only the power button + volume up works which it boots the installing screen and same happens , 99% and shuts down!
I installed samsung usb driver and odin then I connected the phone holding volume up and down , the download screen for firmware shows up successfully , but here is my question , is there any way that I can update the phone without losing data on it? I'm pretty sure that the downloaded update on phone is corrupt , is there any way to replace it from computer and let it update normally?
data on the phone are really important to my mother and if I flash the phone , they are lost! so please let me know if there is any way to fix this issue
Click to expand...
Click to collapse
skysheykh said:
Hello everyone,
I searched a lot for my problem but couldn't find any solution so I decided to post here...
I tried to update my mothers Galaxy A10s officially from the settings but after restarting and booting to blue screen which it shows percentage of installing update , install goes until 99% then it shuts down and doesn't boot up when I hold power button , I tried every combination like power + volume down or volume down then power button and etc. only the power button + volume up works which it boots the installing screen and same happens , 99% and shuts down!
I installed samsung usb driver and odin then I connected the phone holding volume up and down , the download screen for firmware shows up successfully , but here is my question , is there any way that I can update the phone without losing data on it? I'm pretty sure that the downloaded update on phone is corrupt , is there any way to replace it from computer and let it update normally?
data on the phone are really important to my mother and if I flash the phone , they are lost! so please let me know if there is any way to fix this issue , thanks
Click to expand...
Click to collapse
Hey Guys this fix is really simple but will not retain any data unless if you have a backup first step is to install ssung drivers to your pc. 2 Download latest version odin https://odin-samsung.com/odin-3-14-4-odin-download-all-versions-for-samsung-flash.html
3 Download A10S Firmware Binary 5 SM-A107F https://samfw.com/firmware/SM-A107F
SM-A107M https://samfw.com/firmware/SM-A107M
Download version the first version Binary 5 fiware
3 extract firmware
4 Load onto odin BL, AP, CP, CSC
5 HOLD VOLUME + & - TOGETHER AND PLUG IN USB CABLE CONNECT TO YOUR PC DOWNLOAD MODE WILL COME UP VOLUME UP TO CONTINUE AND ID COM PORT WILL BE ADDED ON ODIN
6 Press Start and Flash
7 Setup device and Enjoy PLEASE DO NOT ALLOW UPDATES TO INSTALL UNLESSS SAMSUNG FIXES THE UPDATE.
For data recovery while flashing is not to flash device with CSC file Flash Device USING BL, AP, CP, & HOME CSC DOWNLOAD AN FLASH THE LAST VERSION OF RELEASED FIRMWARE ON WEBSITE
PRE-CAUTION NOT TESTED ON NEW DEVICES BUT WORKED FORE ON OLDER DEVICES I HAD FLASHED DEVICES WITHOUT LOSING DATA USING THAT METHOD
Gsm.Repairs said:
Hey Guys this fix is really simple but will not retain any data unless if you have a backup first step is to install ssung drivers to your pc. 2 Download latest version odin https://odin-samsung.com/odin-3-14-4-odin-download-all-versions-for-samsung-flash.html
3 Download A10S Firmware Binary 5 SM-A107F https://samfw.com/firmware/SM-A107F
SM-A107M https://samfw.com/firmware/SM-A107M
Download version the first version Binary 5 fiware
3 extract firmware
4 Load onto odin BL, AP, CP, CSC
5 HOLD VOLUME + & - TOGETHER AND PLUG IN USB CABLE CONNECT TO YOUR PC DOWNLOAD MODE WILL COME UP VOLUME UP TO CONTINUE AND ID COM PORT WILL BE ADDED ON ODIN
6 Press Start and Flash
7 Setup device and Enjoy PLEASE DO NOT ALLOW UPDATES TO INSTALL UNLESSS SAMSUNG FIXES THE UPDATE.
ANY FURTHER ASSISTANCE: [email protected]
Whatsapp: +1868 286-4500
For data recovery while flashing is not to flash device with CSC file Flash Device USING BL, AP, CP, & HOME CSC DOWNLOAD AN FLASH THE LAST VERSION OF RELEASED FIRMWARE ON WEBSITE
PRE-CAUTION NOT TESTED ON NEW DEVICES BUT WORKED FORE ON OLDER DEVICES I HAD FLASHED DEVICES WITHOUT LOSING DATA USING THAT METHOD
Click to expand...
Click to collapse
Thanks for your help , yeah I know how to flash the device , but this was really strange happening since we did official samsung update and broke the firmware so we weren't prepared to get backup first since they are legit updates and we put our trust in samsung and their testing before releasing updates , now I know they have really poor testing on their softwares before release , I can flash but it will delete all the data and pictures on my mothers phone ....
Hi all,
any news about this problem, because i'm in the same situation as u ... and by the same raison
iliess95 said:
Hi all,
any news about this problem, because i'm in the same situation as u ... and by the same raison
Click to expand...
Click to collapse
I just found the solution and fixed it! , no data is corrupt and its working like a charm.
To fix follow these instructions:
1. First download your phone firmware (
Download A10S Firmware Binary 5 SM-A107F https://samfw.com/firmware/SM-A107F
SM-A107M https://samfw.com/firmware/SM-A107M )
*Note: Find your own phones build number , there is no way to find out just to try one of them and see if you get an error or not, if you get the error you have downloaded the wrong firmware and it will show you the correct build number in download mode. (Their partition table size is also different)
2. Download pit file from this link: https://gsm-flash.com/samsung-galaxy-a10s-pit-file-download-a107/
(A107M or A107F)
3. Load onto odin BL, AP, CP, HOME_CSC (*ITS IMPORTANT TO SELECT HOME_CSC NOT CSC OTHERWISE YOUR DATA WILL BE LOST*)
4. In Pit tab , attach the pit file you just downloaded from the link above. next make sure in option tab , re.partition check box is checked.
5. HOLD VOLUME + & - TOGETHER AND PLUG IN USB CABLE CONNECT TO YOUR PC DOWNLOAD MODE WILL COME UP VOLUME UP TO CONTINUE AND ID COM PORT WILL BE ADDED ON ODIN
6. Press Start and Flash
Enjoy!
* My phone version was A107F. and build number A107FXXU8CUG1
skysheykh said:
Thanks for your help , yeah I know how to flash the device , but this was really strange happening since we did official samsung update and broke the firmware so we weren't prepared to get backup first since they are legit updates and we put our trust in samsung and their testing before releasing updates
Click to expand...
Click to collapse
Encountering problems when doing an OTA update is *very* common - on ALL models. It doesn't mean that the update wasn't tested, and it doesn't mean that every single user is going to get the same issue. It just happens because technology isn't perfect. That's why it's your responsibility to keep your data backed up at all times