Related
Can someone of you senior members describe me how to flash custom kernel via Flashtool 0.6.5.
I try to put kernel .ftf file in Flashtool/devices/x10/kernel but Flashtool can't see it. Just see another kernel, which is there by default (modfxp.doomkernel.v.0.6 for locked bootloader). Then I try to put in firmwares folder, and when I pressed flash (lightning) button small window appear with my kernel file, and some other file (bootlock or something like that). I pick my kernel and Flashtool start to flash something. After I was told to disconnect, press back, and connect again usb (flashmode), phone start to boot with new bootimage (DoomLord one), and then turn off, and battery showed like on charging. I wait a little bit, disconnect from usb, and try to turn on phone, but phone stuck with doomkernel image.
I flashed back to stock with SEUS, root, and unlock bootloader again.
Can someone tell me what went wrong, and how to flash custome kernel???
from X10i via XDA premium
Dzufa said:
Can someone of you senior members describe me how to flash custom kernel via Flashtool 0.6.5.
I try to put kernel .ftf file in Flashtool/devices/x10/kernel but Flashtool can't see it. Just see another kernel, which is there by default (modfxp.doomkernel.v.0.6 for locked bootloader). Then I try to put in firmwares folder, and when I pressed flash (lightning) button small window appear with my kernel file, and some other file (bootlock or something like that). I pick my kernel and Flashtool start to flash something. After I was told to disconnect, press back, and connect again usb (flashmode), phone start to boot with new bootimage (DoomLord one), and then turn off, and battery showed like on charging. I wait a little bit, disconnect from usb, and try to turn on phone, but phone stuck with doomkernel image.
I flashed back to stock with SEUS, root, and unlock bootloader again.
Can someone tell me what went wrong, and how to flash custome kernel???
from X10i via XDA premium
Click to expand...
Click to collapse
You have to put the ftf files in Flashtool\firmwares, read THIS
EDIT: flash a stock firmware with flashtool
LzVebz said:
You have to put the ftf files in Flashtool\firmwares, read THIS
EDIT: flash a stock firmware with flashtool
Click to expand...
Click to collapse
I already read this tutorial. This is How to flash firmare. I need to flash just kernel. I wrote above that I try this method, and my phone stuck with Doomkernel boot image. Do I have to uncheck box "Wipe User Data" and check "Exclude System" instead????
UPDATE: Sorry, you are right...
bro, how to unlock bootloader??? i can install custom kernel..any one say how to unlock BL plz
kingzzz said:
bro, how to unlock bootloader??? i can install custom kernel..any one say how to unlock BL plz
Click to expand...
Click to collapse
Sure, here's (mirror) a small tutorial on how to do this. Just skip the part with rooting Your phone (if You already have root) and continue with unlocking. Please don't forget about DOWNGRADING
Hi, I have a HTC & Asus transformer TF101 and was blissfully unaware that other android devices have convoluted and complicated root / flash procedures, till I was handed my wife's ST15i to root.
I managed to unlock the bootloader and downgrade from ICS stock to gb .42 firmware and rooted using doomlord's zergrush. Then loaded CWMRto the phone (now on .42 gb rooted stock).
I am stuck from here as anything else I flash (custom Rom, upgrade to ICS) gets me to a soft boot (stuck at SE boot logo) or lose root and CWMR on ICS ROM. The help guides, tutorials etc on this forum or elsewhere do not even tell the keypress or tool to use for fastboot, CWMR or how to enter boitloader / recovery. I am no noob on android, adb and rooting, but working with this phone has brought me to tears!
Is the boot IMG and kernel necessarily flashed separately from the ROM on Xperia phones?
My aim is to get to a rooted ICS, non miui ROM for my wife. Please help and /or guide me to achieve this. At this rate, I feel like giving away my HTC to the wife and exchange the Xperia for a more user friendly phone.....
Sent from my HTC Incredible S
Okay, so:
The kernel is seperated from the rom. If you have unlocked the bootloader you can flash a kernel. In most kernels, cwm is included, so you flash the kernel and then you can boot up. While booting you press the volume down button again and again, to come to cwm. There you can install a zip file, in which the rom is.
Are you really sure the bootloader is unlocked? Did you do it by testpoint or sonys official method?
To flash a kernel, you need the boot.img. Before you start flashing the kernel, put the downloaded zip file of the rom on your sd card.
Then, and I would do it like this cause with the normal command line by windows it's the same, you open sony flash tool. There you click on the flash, select fastboot mode and on the right side there is select kernel to flash. There you choose the boot.img. Then you have to shut down your phone, and while you are holding volume up key, you connect phone to pc. There will light up the blue led and flash tool will automaticly flash the kernel. READ THE LOG BEFORE YOU PLUG OFF DEVICE!! If the log is ok (there are no errors), you can plug off device and turn it on. While booting, you press volume down again and again. Then you have to follow the tutorial to the rom (what has to be formatted or wiped and how to install the rom itself. Cause after flashing the kernel, you must install the rom or your device won't boot up!
Okay, now we could do an example:
If you want an ics rom, I would take cyanogenmod 9. Here's a guide:
Download the zip file from here.
Then you extract the zip file, so you have one packed zip file and one unpacked. The packed zip file you copy to your sd card.
In the unpacked, there's a boot.img. If it isn't named boot.img rename it, so it's name is "boot", but windows detects as an image file.
You open sony flash tool and click on the flash, select fastboot mode and then choose "select kernel to flash". Choose the boot.img (make sure it is named boot and it is an image. In flashtool the image you choose should be named boot) and shut down phone. Hold volume up key that the blue led shines, and the kernel is flashed after seconds. Now see the log, if there's no error, plug off the device and power on. While powering on you press the volume down button again and again.
Now you are in cwm. There I would do a backup first. When the backup has finished, you make a factory reset and wipe cache partition.
Then select install zip from sd card and choose zip. There you choose the cm9 zip you copied to your sd card. If it finished installing (don't power off device while installing, sometimes you could think it stuck, but normally it won't. Just wait and drink a coffee!) you can reboot device and normally it should work.
YOU DO THAT ON YOUR OWN RISK. FOR ME ON MINI PRO IT WORKED, BUT I CAN'T PROMISE!
Hope it works and keep up! In the end you will hopefully enjoy your rom (maybe cm9)
Greets
Michael
---------- Post added at 12:31 PM ---------- Previous post was at 11:34 AM ----------
Michi_optimus_me said:
Okay, so:
The kernel is seperated from the rom. If you have unlocked the bootloader you can flash a kernel. In most kernels, cwm is included, so you flash the kernel and then you can boot up. While booting you press the volume down button again and again, to come to cwm. There you can install a zip file, in which the rom is.
Are you really sure the bootloader is unlocked? Did you do it by testpoint or sonys official method?
To flash a kernel, you need the boot.img. Before you start flashing the kernel, put the downloaded zip file of the rom on your sd card.
Then, and I would do it like this cause with the normal command line by windows it's the same, you open sony flash tool. There you click on the flash, select fastboot mode and on the right side there is select kernel to flash. There you choose the boot.img. Then you have to shut down your phone, and while you are holding volume up key, you connect phone to pc. There will light up the blue led and flash tool will automaticly flash the kernel. READ THE LOG BEFORE YOU PLUG OFF DEVICE!! If the log is ok (there are no errors), you can plug off device and turn it on. While booting, you press volume down again and again. Then you have to follow the tutorial to the rom (what has to be formatted or wiped and how to install the rom itself. Cause after flashing the kernel, you must install the rom or your device won't boot up!
Okay, now we could do an example:
If you want an ics rom, I would take cyanogenmod 9. Here's a guide:
Download the zip file from here.
Then you extract the zip file, so you have one packed zip file and one unpacked. The packed zip file you copy to your sd card.
In the unpacked, there's a boot.img. If it isn't named boot.img rename it, so it's name is "boot", but windows detects as an image file.
You open sony flash tool and click on the flash, select fastboot mode and then choose "select kernel to flash". Choose the boot.img (make sure it is named boot and it is an image. In flashtool the image you choose should be named boot) and shut down phone. Hold volume up key that the blue led shines, and the kernel is flashed after seconds. Now see the log, if there's no error, plug off the device and power on. While powering on you press the volume down button again and again.
Now you are in cwm. There I would do a backup first. When the backup has finished, you make a factory reset and wipe cache partition.
Then select install zip from sd card and choose zip. There you choose the cm9 zip you copied to your sd card. If it finished installing (don't power off device while installing, sometimes you could think it stuck, but normally it won't. Just wait and drink a coffee!) you can reboot device and normally it should work.
YOU DO THAT ON YOUR OWN RISK. FOR ME ON MINI PRO IT WORKED, BUT I CAN'T PROMISE!
Hope it works and keep up! In the end you will hopefully enjoy your rom (maybe cm9)
Greets
Michael
Click to expand...
Click to collapse
That won't work if you have no unlocked bootloader! Do this only if you are sure, the bootloader is unlocked!! If it works, it'd be nice if you could tell me!
Michi_optimus_me said:
Okay, so:
The kernel is seperated from the rom. If you have unlocked the bootloader you can flash a kernel. In most kernels, cwm is included, so you flash the kernel and then you can boot up. While booting you press the volume down button again and again, to come to cwm. There you can install a zip file, in which the rom is.
Are you really sure the bootloader is unlocked? Did you do it by testpoint or sonys official method?
To flash a kernel, you need the boot.img. Before you start flashing the kernel, put the downloaded zip file of the rom on your sd card.
Then, and I would do it like this cause with the normal command line by windows it's the same, you open sony flash tool. There you click on the flash, select fastboot mode and on the right side there is select kernel to flash. There you choose the boot.img. Then you have to shut down your phone, and while you are holding volume up key, you connect phone to pc. There will light up the blue led and flash tool will automaticly flash the kernel. READ THE LOG BEFORE YOU PLUG OFF DEVICE!! If the log is ok (there are no errors), you can plug off device and turn it on. While booting, you press volume down again and again. Then you have to follow the tutorial to the rom (what has to be formatted or wiped and how to install the rom itself. Cause after flashing the kernel, you must install the rom or your device won't boot up!
Okay, now we could do an example:
If you want an ics rom, I would take cyanogenmod 9. Here's a guide:
Download the zip file from here.
Then you extract the zip file, so you have one packed zip file and one unpacked. The packed zip file you copy to your sd card.
In the unpacked, there's a boot.img. If it isn't named boot.img rename it, so it's name is "boot", but windows detects as an image file.
You open sony flash tool and click on the flash, select fastboot mode and then choose "select kernel to flash". Choose the boot.img (make sure it is named boot and it is an image. In flashtool the image you choose should be named boot) and shut down phone. Hold volume up key that the blue led shines, and the kernel is flashed after seconds. Now see the log, if there's no error, plug off the device and power on. While powering on you press the volume down button again and again.
Now you are in cwm. There I would do a backup first. When the backup has finished, you make a factory reset and wipe cache partition.
Then select install zip from sd card and choose zip. There you choose the cm9 zip you copied to your sd card. If it finished installing (don't power off device while installing, sometimes you could think it stuck, but normally it won't. Just wait and drink a coffee!) you can reboot device and normally it should work.
YOU DO THAT ON YOUR OWN RISK. FOR ME ON MINI PRO IT WORKED, BUT I CAN'T PROMISE!
Hope it works and keep up! In the end you will hopefully enjoy your rom (maybe cm9)
Greets
Michael
---------- Post added at 12:31 PM ---------- Previous post was at 11:34 AM ----------
That won't work if you have no unlocked bootloader! Do this only if you are sure, the bootloader is unlocked!! If it works, it'd be nice if you could tell me!
Click to expand...
Click to collapse
Bootloader IS unlocked from SE website. I used the unlocking-relocking toil by quaghi. Wow! So many steps in this phone..... And thanks, CM7/CM9 was also one of my choices, though the wife prefers smulrronic..... Thanks a ton you guys......
Sent from my HTC Incredible S
Tried all methods, flashtool, adb & fastboot commands, and everytime I get to a softbrick/stuck at bootloader.
Facts:
1. Bootloader is unlocked (unlock method SE official). Checked by *#*# SERVICE(7378423) #*#* & got no output.
2. Am able to downgrade to .42 firmware and root that firmware (stock gb).
From that point onwards, when I try to flash a new kernel (boot.IMG), or a custom ICS ROM (smultronic & real ICS 5.2) I end up losing boot, root and end up at bootloop. It's all as clear as mud!
I suppose I have to relinquish this phone to my wife,while I try to find out a way to get a rooted ICS ROM up and running on the Xperia ST15i. Any help from this community will be gratefully accepted.
Sent from my HTC Incredible S
But you can use it with the stock bootloader and gingerbread?
With this your phone boots up?
mihahn said:
But you can use it with the stock bootloader and gingerbread?
With this your phone boots up?
Click to expand...
Click to collapse
Tried that too. Does not boot.
Sent from my HTC Incredible S
So the device is bricked up atm?
Can you enter cwm or does it vibrate if you try to turn it on?
Have you tried multiple kernels right now?
Device is ok till I root on .42. Firmware. Thereafter I can't seem to get any custom ROM to boot. After installing CWMR and flashing a custom kernel (x-kernel, krish kernel) & thereafter wipe data, system, cache &dalvik & flash smultronic or clean ICS 1.5 thru aroma, I always seem to end in a bootloop (that too with the gb boot showing Sony Ericsson, not the Sony - Xperia ICS boot). To get back, I have to flashtool the .42 ftf and use the doomlord zergrush exploit to re-obtain root. What am I doing wrong?
Sent from my HTC Incredible S
You should install Android Android 4.0.4. You have to flash it with flashtool.
NEVER UPDATE OVER THE AIR IF YOU HAVE AN UNLOCKED BOOTLOADER!!!
So just flash Android 4.0.4 . Download an android 4 kernel like Extended Stock Kernel from here and download the android 4 rom (4.1.B.0.431) for your xperia mini here. Then you download Real Ics from here.
Then flash the kernel in fastboot mode and without restarting flash the android 4 rom in flashmode.The rom isn't rooted, but you don't need to root, cause cwm is included in the kernel! Then restart. If it restarts you can go on. Shutdown and enter cwm.
There you don't wipe anything!!! Don't format system etc!
You just install the zip from sdcard and after the installation is complete and before you reboot you make a factory reset and wipe dalvik cache...
Then you restart.
Normally it should work!
Greets
Michael
@Michael,
Dankeschön. Will give the way you describe one last try.
Edit....
My wife connected her phone to the laptop and the SEUS updated the phone to stock ICS 4.1xx. Not a big problem I assume, coz I downgraded from that very version.
Sent from my HTC Incredible S
I SOLVED IT!!!! You guys on the Xperia 2011 section are quite unkind to noobs & neophytes. I was wondering... 'After all it is the same Android OS. What can be so difficult in this device?' I did some more research and decided to give it another try:
1. Starting point... ST15i at stock ICS 4.1.B.0.431 firmware with locked boot loader (after a mistaken connection to laptop and SEUS updated to locked boot loader ICS firmware... iI think it is the Sony Smultron WWE equivalent).
2. Ran SE Boot loader Unlocking v1.6 by quangnhut123 (Excellent tool BTW). Got boot loader unlock from SE Official method.
3. While in the same boot loader Locking/Unlocking tool, flashed EXtended Stock Kernel - v2 for 4.1.B.0.431 from fastboot (Blue light, vol up and insert USB?). The kernel is pre-rooted with busybox and has DoomLord's version of CWMR.
4. Viola!!! Root on Stock ICS firmware with CWMR. Here's to you boors who told me that ICS on this phone could not be rooted!!!!
Thanks Michael, you helped me think while every other thread advised outrageous actions and i was quietly led up the garden path (Auf Eis gefurht!!!)
Presently wife prefers stock and wishes only to delete bloat system apps and use hostfiles to block ads.... Hope others find my post helpful to root their devices too....
Sent from my Incredible S
Root the M4 Aqua E2303 Locked Bootloader/Install TWRP on 2.167/3.92
Before we begin:
Make sure you have the following:
•A Windows PC
•Flashtool (https://drive.google.com/file/d/0B_d8uWGbkaetTnhWX0J5UG5hN28/view?pref=2&pli=1)
•The .128 firmware (https://drive.google.com/file/d/0BzVQf67OZ9NtMFotOXRycTZoSlk/view?pli=1)
•Patience
•A good internet connection
•15 to 20 minutes
• The M4 Aqua Root Toolkit (https://www.dropbox.com/s/edse0h6b02odzn1/rootkitXperia_E23xx.zip?dl=0)
•ADB Drivers (https://drive.google.com/file/d/0B0MKgCbUM0itNVB1elljU2NPR0k/view?pref=2&pli=1)
•TWRP Toolkit (https://www.dropbox.com/s/yomdwq3p2le9hvi/M4Aqua-lockedTWRP-0.1-installer.zip?dl=0)
How are we going to do it:
The procedure is pretty straight forward, as the M4 Aqua is only on Android™ 5.0 we can take the kernel of the older versions of firmwares so we could root the device, while keeping the firmware version to the newest release (2.167/3.92). The method has been only tried on the E2303, there may be chances of it working for the E2306.
Let's begin! Part 1, Changing the Kernel:
First, we need to install the latest Flashtool version (link above), after you proceed with the installation of Flashtool, you need to install the Flashtool drivers, which can be found in C:/Flashtool/drivers or the path you selected flashtool to be installed. Once you open Flashtool drivers you want to select FLASHMODE DRIVERS, this is only so that the M4 will be recognised while in flashmode. After the drivers have been installed, you want to move the downloaded .128 firmware to C:/Users/*YourName*/.flashtool/firmwares or you can use the other method I will show later. Once you have done that you want to open Flashtool and wait for the Sync to finish. After that has finished, you will see a lighting icon in the top-left corner, you want to press the icon and select flashmode, now the second method, at the top you will see a path leading to the generic .tft folder in which Flashtool belives the .ftf files are located by default. You can change that by pressing the button on the right and lead the program to the path of the .128 ftf file. After you have selected your .tft file you will see on the right a lot of options *everything that the .ftf file contains*, if you want to keep the data on your device you can tick the first two options, a bit down on the right you will see a lot of options, including system.bin, you want to tick everything EXCEPT for the kernel.sin, this is the most crucial part. After that is done you want to let the program prepare the files, mean while you want to power off your M4 Aqua, after the process on Flashtool is done you want to press the VOLUME DOWN button while connecting the phone to the PC, once you see the green led light you can leave the button, if everything was done right the process of flashing should begin. If everything went well the kernel should be flashed and the phone should safely power on. Now we can proceed to the second part. Rooting the phone.
2ND METHOD
You can downgrade to .128 firmware and download the .167 or .92 firmware and update everything except for the kernel. You can do this by going into Flashtool, and doing the steps above but TICKING the kernel.sin. Try this if the first method doesn't work.
Part 2, Rooting the phone:
Now that we have changed the kernel we can use the root toolkit to root the device. Download the root toolkit from the link above, but before you do anything you want to go to Settings>About Phone, scroll down to Build number and press it 7 times, after that is done you want to go back to Developer options, and you want to tick USB Debugging, after you have done that you need to install the ADB Drivers from the link above, after that is done you can connect the phone to the computer, now you want to extract the toolkit and run install.bat *No administrator rights needed*, and then you should see a screen on your phone asking if you want to trust the computer, you want to tick the box saying always and you want to press yes, now the rooting process should begin and your phone to be rooted. After this is done we can proceed to the part 3, installing TWRP
Part 3,Installing TWRP:
Now, that we have root we can install TWRP using another toolkit. This part is optional but if you want any custom ROM's you need this. This part is the easiest, you need to download the toolkit from the link above and just run the script. We don't need any additional steps as we did them in Part 2.
If everything went well you should now be rooted and have TWRP with a locked bootloader and on the newest firmware.
In case of bricking you can use the Sony PC Companion tool and repair my phone/ tablet option. YOU WILL LOSE ANY DATA SAVED ON YOUR PHONE.
sir , can this apply to D2353?
I have only tried on E2303, but you use the right .ftf files the procedure should work
im flashed 128 kernel on 3.92, phone not booted stuck boot animation..
fix this after root random reboots? im rooted on 128 and upgrade 3.92 by twrpreroot, phone randomly reboots..
edit: im flashed 128 kernel on 2.167, phone not booted
osman.by said:
im flashed 128 kernel on 3.92, phone not booted stuck boot animation..
fix this after root random reboots? im rooted on 128 and upgrade 3.92 by twrpreroot, phone randomly reboots..
edit: im flashed 128 kernel on 2.167, phone not booted
Click to expand...
Click to collapse
Root and flash stock kernel tft u use
I'm having issues with this also. Downgrading the kernel only causes a boot loop animation. I can downgrade everything to 128 and it works. Going back up to latest with everything BUT kernel causes boot animation loops also.
EDIT!
Oh heck yes, I did it! For anyone stuck in a logo boot loop despite following the above, here is how I did it:
- Use Flashtool to completely flash my .167 E2303 to .128.
- Use above tools to root and install TWRP.
- Use Flashtool again, but this time in Fastboot mode. I extracted the system.sin file from a .167 ftf and then flashed system using Flashtool.
- Reboot the phone into TWRP. Clear cache, dalvik. I did NOT clear data.
- Install M4 extras. Install AOSGP. Clear cache, dalvik.
- Reboot took about 15 minutes, probably less.. and BINGO.
Thanks to all.
d0mokun said:
I'm having issues with this also. Downgrading the kernel only causes a boot loop animation. I can downgrade everything to 128 and it works. Going back up to latest with everything BUT kernel causes boot animation loops also.
EDIT!
Oh heck yes, I did it! For anyone stuck in a logo boot loop despite following the above, here is how I did it:
- Use Flashtool to completely flash my .167 E2303 to .128.
- Use above tools to root and install TWRP.
- Use Flashtool again, but this time in Fastboot mode. I extracted the system.sin file from a .167 ftf and then flashed system using Flashtool.
- Reboot the phone into TWRP. Clear cache, dalvik. I did NOT clear data.
- Install M4 extras. Install AOSGP. Clear cache, dalvik.
- Reboot took about 15 minutes, probably less.. and BINGO.
Thanks to all.
Click to expand...
Click to collapse
When i upgraded from 128 to 167, phone works well but random reboots. Any fix this issue?
Clean install of .167 and .92. Flashing the .128 kernel causes the blue boot animation to hang (the start up sound cuts off half way). Flashing the previous kernel back over works.
Same happens when I flash .128 then everything but the kernel from .167 and .92.
Unsure what the FSC script option does, but yes or no makes no difference.
d0mokun said:
I'm having issues with this also. Downgrading the kernel only causes a boot loop animation. I can downgrade everything to 128 and it works. Going back up to latest with everything BUT kernel causes boot animation loops also.
EDIT!
Oh heck yes, I did it! For anyone stuck in a logo boot loop despite following the above, here is how I did it:
- Use Flashtool to completely flash my .167 E2303 to .128.
- Use above tools to root and install TWRP.
- Use Flashtool again, but this time in Fastboot mode. I extracted the system.sin file from a .167 ftf and then flashed system using Flashtool.
- Reboot the phone into TWRP. Clear cache, dalvik. I did NOT clear data.
- Install M4 extras. Install AOSGP. Clear cache, dalvik.
- Reboot took about 15 minutes, probably less.. and BINGO.
Thanks to all.
Click to expand...
Click to collapse
EDIT: Someone re-uploaded the M4 rootkit: http://forum.xda-developers.com/m4-aqua/general/guide-t3130092/post65486499#post65486499
bootloop on E2303 Tried both methods
Hey all. Trying to root my E2353 on 26.1.A.1.112. Ran install.bat with all drivers installed, with adb, but all I'm getting is this. Any suggestions?
drunkenlo said:
Hey all. Trying to root my E2353 on 26.1.A.1.112. Ran install.bat with all drivers installed, with adb, but all I'm getting is this. Any suggestions?
Click to expand...
Click to collapse
enable usb debugging and unlock the phone and accept the popup message when plugged in
Jevinruv said:
enable usb debugging and unlock the phone and accept the popup message when plugged in
Click to expand...
Click to collapse
I have usb debbugging enabled and the phone unlocked but I don't get a popup message. Tried disabling and re-enabling usb debugging but still nothing.
drunkenlo said:
I have usb debbugging enabled and the phone unlocked but I don't get a popup message. Tried disabling and re-enabling usb debugging but still nothing.
Click to expand...
Click to collapse
Revoke USB Debugging authorization from developer Settings
Random Reboots
Any fix for the random reboots as of yet?
could u fix the dropbox link, it isnt working for me - Error (429)
This account's links are generating too much traffic and have been temporarily disabled!
I'm getting an error when installing the flashmode drivers, it just says failed after I tick the box and continue. Can anybody help me please? I've tried rebooting my PC, running as admin and even tried compatibility options but it doesn't help.
osman.by said:
When i upgraded from 128 to 167, phone works well but random reboots. Any fix this issue?
Click to expand...
Click to collapse
kgalv419 said:
Any fix for the random reboots as of yet?
Click to expand...
Click to collapse
If your random reboots usually happen while downloading or updating apps in the play store, you should try this. Make sure you backup your data first just in case.
http://forum.xda-developers.com/m4-aqua/general/guide-fixing-random-gplay-app-install-t3338362
Hello. Please help. I got softreboot everytime I try to call someone
Sent from my E2303 using Tapatalk
Hello,
thank you for this guide. I have a question: why not extracting the old kernel and just flashing the kernel.sin?
I tried to flash a new rom, but it caused my M4 Aqua E2303 to fall into bootloop. Of course I can boot it into flashmode, but it reboots itself after 1 minute or so into the bootloader (so bootloop), so I can't flash anything in that time. I really need help.
try to reflash excluding system partition
what version of flashtool are you using?
if flashtool prompt to use a fsc script click yes
once you flash the partial ftf turn off the phone and finally try again to flash the whole ftf
Hello.
Im not a pro and afraid of briсks. Please check my way i will go to revert to 7.0 stock from Lineage 14.1. Lineage is perfect, i need to revert coz of owner wish.
So, i have:
Z5 compact E5823
TWRP 3.1.1-0
Lineage 7.1.2
Root
Unlocked bootloader
What am I going to do:
I downloaded official firmware E5823_32.3.A.0.376_R2D_Russia Generic_1298-5167.ftf
Instruction from xperiafirmware dot com
paste the ftf file downloaded to folder „Firmware“ included in the XPERIA Flashtool
open the XPERIA Flashtool, click on flash and choose downloaded firmware, than click ok. Important - if you do not want to delete any data of your phone, just uncheck flashing userdata.sin file. All data will remain in your phone, but sometimes it can cause additional troubles. So it is better (and I recommend that) to do the backup of your personal data, than proceed with clean instalation and then restore your personal data.
turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button
after few minutes all is done and your phone gets the new firmware
Is this way is correct?
Thank you for your attention.