So about a week ago I was doing stuff on my PC. I take my Redmi 5 Plus (at the time with Pixel Experience installed) and I see that the screen is completely black.
Try to reboot, nothing. Vibration, Black screen for like 5 seconds, repeat.
Try to boot into TWRP, nothing. Fastboot, still that damned black screen.
I decided to reinstall the stock firmware, and I do it through the test point method. The software takes like 40 minutes to do so, but in the end it says "Success!".
Nothing, black screen.
So, I write this post to try and find a solution, or at least now what could have happened as since then I bought the Huawei P20 Lite. It could still be usefull though.
Thanks in advance and good day
@apd911
The time that MiFlash Tool spends to flash a rom in edl mode is aproximately 13 minutes.
Try flashing the firmware that came pre-installed.
You mentioned that you can´t enter to recovery nor fastboot mode before to reinstall the rom stock but after that now you can enter to recovery stock or fastboot?
SubwayChamp said:
@apd911
The time that MiFlash Tool spends to flash a rom in edl mode is aproximately 13 minutes.
Try flashing the firmware that came pre-installed.
You mentioned that you can´t enter to recovery nor fastboot mode before to reinstall the rom stock but after that now you can enter to recovery stock or fastboot?
Click to expand...
Click to collapse
No, same thing, black screen for five seconds then reboot, even in fastboot and recovery
apd911 said:
No, same thing, black screen for five seconds then reboot, even in fastboot and recovery
Click to expand...
Click to collapse
I flashed many roms in edl mode. here you have two possible situations; if your emmc is damaged pc will detect device and will listed how it´s showed in the screenshot attached but the flash won´t be succesfull not even will start, and second if device it´s not detected in the same way that in the picture then it´s not flashing correctly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you attach some screenshot?
Related
OK, guys. I'm PANICING!!! Not really, I'm not but I was trying the new MIUI ROMs, I was all jolly and fun testing them out, messing up stuff, reinstalling'em and after I flashed the Official MIUI over the unofficial one something weird happened.
When I it boot my phone after the restart instead of the Red Moto Logo and the sign "Unlocked" it was all text. The sigh "Unlocked" was there, but instead of the Logo there was wall of text:
PwrReason: POWER_CUT
OS will boot in 5 seconds
Press a key to stop count down
Available Modes are:
1.RSD
2.Fastboot
3.NvFlash
4.BP HW Bypass RSD
5-14 etc. (The rest of the bootloader options)
------------------------------------------------------------------------------
Vol Up to select, Vol down for next
Curent choice in mod:
xxxxxxxxxxxx
So you get the point, I was like "yeah who cares... Moto logo, wall of text, same **** so I started the ROM, ofcourse it had that weird bug when I had to click 0.5cm lower than where the actual button was (some screen misscalibration, whatever) but then when I restarted my phone I couldn't access the android recovery, every time I hold down the button, select the android recovery and select it the bootloader restarts again and again.
So if someone has an idea what my cause this and how to fix it, please help. Tomorrow will provide pictures if needed, thanks in advance!
Cheers!
Here is a screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
instead of this:
Flashed MIUI versions today and did not experiance that myself probally didnt follow the same steps however the screen gets unresponive to touches and button presses so i have to lock it and unlock it for it to work after a short time other than that the Roms fairly smooth Im probally gona have to flash something else though.
OK. Update on my case. I managed to reflash the recovery and I managed to boot it. Then I restore my CM10.1 from the backup I had, but now I still have this problem:
My screen is not calibrated, if I click somewhere on the screen it detects my click 1cm above the place I clicked and the worst part is that it detects my menu/home/back/search keys as a part of the screen so I can't use them now. When I click one of those keys it detects them as the bottom of my screen. Anyone has an idea of what's going on? I'm pretty sure it's software problem. ;(
OK. I fixed it (The screen calibration/4 bottom buttons not working). PHEW!!!
Here is how I fixed it.
1.Download http://www.mediafire.com/download.php?j1jtgo02q4q3a17
2. Fastboot your Atrix
3. Fastboot code:
* fastboot flash pds pdsfix.img
* fastboot reboot
All back to normal!
Hello, it's 6 month since i using my s6 edge never had any problem , like 1hour ago i took phone wanted to call and went off when and now not booting when i press power button to boot it shows me boot logo and down is light screen but screen is like blinking not able to show in picture can anybody tell me what happend to the phone ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i reflesh it with same ROM that it had official one , but still same can anybody help meeee?
Don't know what's wrong but I can suggest u to install a custom ROM.
tra_dax
I can't access recovery mode ...
Nikusha04 said:
I can't access recovery mode ...
Click to expand...
Click to collapse
If u have any official cm rom for ur device then flash it via Odin.
And if it doesn't work, try out loading the CSC and BL file with the PDA file. This might work.
tra_dax
mine did the exact same thing with that goofy lower half of the screen. It went away after a reboot and I stopped using the phone. Going to upgrade to 5.1.1 on the chance it's a software problem if it happens again.
I took it in guarantee service they said motherboard is dead need replace
The same here ...
This confirmed that the main board is damaged ??
I flashing an official rom and done correctly, but the restart stay in bootloop ...
VooDooKill said:
The same here ...
This confirmed that the main board is damaged ??
I flashing an official rom and done correctly, but the restart stay in bootloop ...
Click to expand...
Click to collapse
Did you try to get Download Mode again?
CrashTestDroid said:
Did you try to get Download Mode again?
Click to expand...
Click to collapse
Yes... I enter to download mode again, I flash official stock rom in three times correctly but always restarts with the bootloop ...
Hello,
i'm new in the forum, i have problem with Meizu M6 Note M721H because i have installed twrp recovery with app crack (3.2.1) and next i have deleted SO (flyme firmware) and i have cleaned the phone, after i have updated twrp to 3.2.2-0 version and after reboot, after 1-2 seconds of meizu logo the screen becomes black and the twrp doesn't start....and i haven't firmware installed...fastboot mode working but i haven't permissions because bootloader is locked and secured. I can't use well QFIL.exe and after after I Have entered the files in the program and start download, i have the issue: "Download Fail: Switch to EDL FailFailed to Switch to Emergency Download mode". I tried everything, could you help me?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Maybe this can help you to fix that error.
https://geekofia.wordpress.com/2017/10/12/download-failswitch-to-edl-failfirehose-fail-fixed/
MatteoGhost07 said:
Hello,
i'm new in the forum, i have problem with Meizu M6 Note M721H because i have installed twrp recovery with app crack (3.2.1) and next i have deleted SO (flyme firmware) and i have cleaned the phone, after i have updated twrp to 3.2.2-0 version and after reboot, after 1-2 seconds of meizu logo the screen becomes black and the twrp doesn't start....and i haven't firmware installed...fastboot mode working but i haven't permissions because bootloader is locked and secured. I can't use well QFIL.exe and after after I Have entered the files in the program and start download, i have the issue: "Download Fail: Switch to EDL FailFailed to Switch to Emergency Download mode". I tried everything, could you help me?
Click to expand...
Click to collapse
what do you mean you deleted "SO"?
if i understand correctly you replaced stock recovery with twrp but it can not load because your bootloader is locked.
i am not very well familiar with qfill but you are having wrong port open "900E" . you need to enable "9008".
try if this trick works https://www.youtube.com/watch?v=fOpZsUQwOrY
fortunately i have the same problem, same phone, unfortunately you need to open it up, as i understand there are some circuits you need to shortcircuit to load the fastboot, looking into this now, will post updates
And how did someone solve a black screen problem after TWRP botting? I have the same problem and I can not deal with it; /
master2007 said:
And how did someone solve a black screen problem after TWRP botting? I have the same problem and I can not deal with it; /
Click to expand...
Click to collapse
hold down the power button for 20 seconds?
Assuming you still have an the Android OS installed.
Unbrick Meizu M6 note
Hello, why don't you try to flash it with qfil rom?
Hi, I have someone's old s7 edge which I'd like to use in place of my A10e lol, it still has their password on it tho. The screen seems to have some really weird issues, if I power it on using the home button or power button half the time the screen will be extremely dim/green and half of it will flicker. It looks and works perfectly fine the rest of the time though. I got it to the "recovery booting" screen, but the screen just flashes then goes near-black (still slightly glowing, doesn't turn off) then boots normally about a minute later.
I've tried around 40 times and can't get it to go into recovery mode. I have no idea what I'm doing but I put it in download mode and tried using Odin to flash it with files I got off sammobile. It didn't even connect at first but did after I installed Kies. Odin said it passed, the phone restarted, then just booted back up to the same lock screen. I then tried installing TWRP onto it, which failed saying it couldn't open the serial(com) port? That's where I am now... does anyone know if there's any way to wipe the phone?
@eggy1
If you've phone's Stock ROM ( ZIP file ) at your fingertips then you simply re-flash phone with this Stock ROM to bring back the phone to its initial state.
If you can access phone by means of ADB/Fastboot then it's really simple to do a clean install of phone's Stock ROM..
jwoegerbauer said:
@eggy1
If you've phone's Stock ROM ( ZIP file ) at your fingertips then you simply re-flash phone with this Stock ROM to bring back the phone to its initial state.
If you can access phone by means of ADB/Fastboot then it's really simple to do a clean install of phone's Stock ROM..
Click to expand...
Click to collapse
I can't get adb to detect the phone, but I flashed it successfully with Odin using the files from this thread:
https://forum.xda-developers.com/sprint-s7-edge/how-to/sm-g935p-stock-odin-firmware-t3582821
It now seems to be stuck in a loop of recovery booting into the download mode screen, and occasionally into a caution screen that says no command.. should I try another rom?
@eggy1
Use SamFirm Tool what allows you to manually search and download the Stock ROM matching your phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Day before yesterday i was trying to flash rom to update (mi pad 1 )4.4 to lollipop version and I’ve did everything exactly same like tutorial first rooted with update.zip to activate twrp then flash custom rom but it got error in middle due to this when I rebooted the device it stuck on logo . I’ve flashed recovery firmware by mi flashing tool it goes 100% in bootloader mode but still stuck on logo. Any method to back to normal?
Did you flash shied blob based rom?
SquirreL_64 said:
Did you flash shied blob based rom?
Click to expand...
Click to collapse
Nope I’ve just flashed different normal fastboot roms . Only can access fastboot mode and recovery mode even restarting stuck on mi logo don’t know when it gonna be fixed
Gagan36 said:
Nope I’ve just flashed different normal fastboot roms . Only can access fastboot mode and recovery mode even restarting stuck on mi logo don’t know when it gonna be fixed
Click to expand...
Click to collapse
Did u do something like tos or boot?
BTW which rom did you flash cuz miui never released fastboot rom for lolipop
SquirreL_64 said:
Did you flash shied blob based rom?
Click to expand...
Click to collapse
i have the same problem... stuck in bootlop, and before that i used to have a shied blob based rom... what should i do now?
thank you.
EDIT:fastboot ROMs? Never know that it existed for mi pad.
1. Download Mi PC suite and connect it in fastboot mode.
If everything go normal then it will automatically detect the respective ROM.
Check the screenshot below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Just click on Flash device.
Now if all the things are normal it will reboot normally.