Hi, I ave a MTK 6589 device (Green Orange N1-Y) and I would like to flash custom rom I've downloaded from Needrom with SP Flash Tools.
The problem is that this phone is with built-in battery. How to flash the rom? SP Flash Tool give me error " brom error s brom cmd startcmd fail 2005 "
I search all day for a solution, but nothing. Is there any chance?
Thanks
Martin
Try to hard reset. Hold down the power button for at least 30 seconds. On devices that support it, the screen will turn off and the device should begin to cold reboot. A cold boot is where a device starts up from a power-off state. If that doesn't work you might have to test just how "nonremovable" their battery is and disassemble your device. If there aren't wires coming from the battery that are soldered to the phone's circuit board then it should be removable.
Hello to everyone,
I have the same GO phone. Do not try to open it (with purpose to take off the battery). To connect that phone in preloader mode just press volume up and then connect it in your pc. If you have the correct usb drivers, SP flash will find your phone.
I have done it and it worked for me. I have rooted my GO N1-y and I have used SP flash to unbrick my phone (I faced a problem with SP flash v.5.1352.01 and as a result I bricked my phone) using the official ROM. I did it with SP flash v.3.1320.0.174.
So, please give any feedback in case you find a custom rom for N1-Y.
Be good!!
thanasisvas said:
Hello to everyone,
I have the same GO phone. Do not try to open it (with purpose to take off the battery). To connect that phone in preloader mode just press volume up and then connect it in your pc. If you have the correct usb drivers, SP flash will find your phone.
I have done it and it worked for me. I have rooted my GO N1-y and I have used SP flash to unbrick my phone (I faced a problem with SP flash v.5.1352.01 and as a result I bricked my phone) using the official ROM. I did it with SP flash v.3.1320.0.174.
So, please give any feedback in case you find a custom rom for N1-Y.
Be good!!
Click to expand...
Click to collapse
I'm on my phone but I have another thread where I've discussed my many rom uses on the N1-Y
I've just found what I think is the best rom.
It's actually made for the Xolo Q1000s (the q1000s plus is pretty much a rebranded go n1y)
http://www.xolo.in/xolocare/software-update?page=3
If your try to Flash it via cwm it'll give an error.
I used 7 zip to view the archive and I edited it so that it never checked build.prop.
Flashed fine and is working great.
martistmusic said:
Hi, I ave a MTK 6589 device (Green Orange N1-Y) and I would like to flash custom rom I've downloaded from Needrom with SP Flash Tools.
The problem is that this phone is with built-in battery. How to flash the rom? SP Flash Tool give me error " brom error s brom cmd startcmd fail 2005 "
I search all day for a solution, but nothing. Is there any chance?
Thanks
Martin
Click to expand...
Click to collapse
Im not sure about your device, but i believe if your battery is not removeable, there will be a way to turn off your phone.
try pressing volume up and power until it vibrates 3 times, if its sony then this will work, try other button combination too
Try this : press volume up + volume down + Power
it work
MrMaddTraxx said:
Try this : press volume up + volume down + Power
Click to expand...
Click to collapse
I have mtk a device with a non-removable battery and I tried SEVERAL thing nothing works the dvice wase break dead then i tray these
prese up volume + down volum + power buttons and hold down and
i clique download in spflash tool
HaniAnis said:
I have mtk a device with a non-removable battery and I tried SEVERAL thing nothing works the dvice wase break dead then i tray these
prese up volume + down volum + power buttons and hold down and
i clique download in spflash tool
Click to expand...
Click to collapse
Well if you read the previous reply you should've noticed it was that combination to turn the device off.
I don't know what kind of problem you have so I have no idea how I could help you unless you say so
martistmusic said:
Hi, I ave a MTK 6589 device (Green Orange N1-Y) and I would like to flash custom rom I've downloaded from Needrom with SP Flash Tools.
The problem is that this phone is with built-in battery. How to flash the rom? SP Flash Tool give me error " brom error s brom cmd startcmd fail 2005 "
I search all day for a solution, but nothing. Is there any chance?
Thanks
Martin
Click to expand...
Click to collapse
Listen
your phone is rebooting but not showing on the screen
so what you need to do is
just try various combination like
vol up and vol down
vol up and power
vol down and power
and try this combination and keep pressing the button
and connect device to pc
and you will get the error that device power up too early
and the reason for the error is
reboot of device but no display on screen
so just try and try until your pc detect device and flashing starts
and believe me this the correct method
because i have repaired my phone with same method and i am sure because it worked for me three times
so keep trying the combination and at a moment your flashing tool
will start the flashing?
:fingers-crossed::fingers-crossed:
Give a LIKE :good::good:
martistmusic said:
Hi, I ave a MTK 6589 device (Green Orange N1-Y) and I would like to flash custom rom I've downloaded from Needrom with SP Flash Tools.
The problem is that this phone is with built-in battery. How to flash the rom? SP Flash Tool give me error " brom error s brom cmd startcmd fail 2005 "
I search all day for a solution, but nothing. Is there any chance?
Thanks
Martin
Click to expand...
Click to collapse
Hope my solution will help
i have an old phone hesens HE-F4 i insert sim card (GSM) and it displays no UIM card currently all the relevant apps of messaging internet and calls cannot be accessed how do i make it work
hi xda
got a big problem , my cm flare dash is in bootloop or bricked or sumthing else , I think my emmc is corupted. every time I boot my phone it always show "encryption unsucesful reset your phone to resume using your phone" when I click the reset phone it boot to my stock recovery with an error e: failed to mount data , try wiping cache and restoring factory settings via stock recovery but it doesnt work , ive already tried flashing a stock rom using qualfast , qrt , qpst , but no suces in flashing , I even tried flashing via fastboot mode using minimal fastboot but it stock in sending system.img forever I even try erasing via fastboot using the command fastboot erase system or cache it prompts ok but nothing's change , oh and by the way my usb debuging mode is off and I dont have an ability to turn it on coz im in bootloop, and I dont have root rights , any help from xda? pls pls??
Hi buddies.....
i have micromax q345(rooted with kingroot). I have tried to install recovery with mtk droid tools but all in in vain. It wont recognize my phone showing yellow sign and an error showing
error no kernalGZ found
error no split boot image etc
i have also tried to port recovery from other phones on my own but it wont work. Phone shows a blank screen and then nothing. So i am requesting a developer plz port a recovery for me. I shall be very thank full to you....
Sent from my Micromax Q345 using Tapatalk
Yureka Yu 55110A bricked no recovery no fastboot bootloop
First i rooted my phone with king root i wanted to flash twrp in my yu yureka plus 5510a no idead what " A" stands for,
then i used flashify from playstore and downloaded the twrp by the official twrp and flashed it with the flashify and boom boot stuck with no recovery somehow removing battery and connecting the phone goes to the charging display from where i ablel to go in the fast boot, but then cmd was not able to identify adb devices nor the flashboot commands tried all the drivers adb drivers fastboot driver phone Coolpad drivers but no one helped
, so i decided to use a method of ygdp , much hopes with this file used ***** 5.1.153.00.P0.160604.8675_I02.def.CPB ******* dont know where the log file is but it was showing
old bootloader error
downloading error
and some other error and terminated at 2 % , then this one of your thread by unziping the official files and clicking on flash-all.bat file which ive provided img(1) "some trials with some "waiting devices error " message but then it just worked oem unlock and some lines of codes and then successful , tried to boot again but this time phone was automatically jumping into fastboot mode , then i finally tried one last time in that power shell thing by using cmd and applied fastboot code , even then was no devices was showing in powe shell (cmd)
, but then i used some different code something like "fastboot ix902 recovery " and i was able to install a real old twrp recovery . I did used some trial command of fastboot to check if device is even recognizing it or not.. and it wasn't but still flashing image worked ...... and able to reach at least cyanogen loading logo . But something I noticed was that yureka boot logo was changed I guess ygdp tool did something or maybe flash-all.bat
phone was showing the cyanogen loading ....but 15 min nothing ...but luckily recovery was working but dont know why the buttons setup used to go in fastboot mode were taking me in the recovery,, and the most important thing was fastboot was no longer acessable , so i downloaded latest recovery from your respected thread file named as " twrp-3.0.2-0-20160604-UNOFFICIAL-tomato.img " specified for 5501a yureka plus i wanted to install nougat aosp so i thought its a nice idea to update the recovery first so i did the normal recovery update from the recovery it self but then booom no recovery , no fastboot , tried all the combination and came up with this one volume+ vol- and power button shown in img(2) same as boot logo but a small "official" tag.
.
.
.
.
.
.
.
.
So in the sum up my phone isn't going booting. Not going in recovery no fastboot mode... Just the 8 sec boot loop with the Yu yureka logo and with all the buttons clicked it shows a small written official tag... Pls help I heard until it show something it have hopes one thing I want to mention it have removable battery and SD card slot so if u know any process it will be usefull but ...just please don't take time to reply on this thread. It not my phone I have to repair it soon. .
If image attachments arn't visible here is link
https://drive.google.com/file/d/1u429vKHkLkoFoS9aHkiyLWPSQVq8Ezph/view?usp=drivesdk
https://drive.google.com/file/d/1jF4PDG6aZDetVajJvbgZgXUnKjsoufUC/view?usp=drivesdk
https://drive.google.com/file/d/1fysp0Q5OGgFxXIMmkn2ajhpSS7XeX01s/view?usp=drivesdk
Hello!
My phone, Acer Liquid Z630s, recently had a problem and ended up shutting off as soon as it boots up. I turn it on, the Acer powered by Android white screen shows up then immediately shuts off. What was the problem here?
I couldn't access recovery mode either because it would also show up the same thing above then shut off immediately before it can even reach the recovery mode menu. But I could plug it in directly into download mode through SP Flash Tools because the phone vibrates when I hold down the volume up + power buttons (aka the recovery mode combination which was I think also the download mode combination). I downloaded the correct stock ROM off the Acer website (MT6753) and flashed it. The ROM was successfully flashed. But when I turned it on the screen lit up but it was just a blank black screen. It was lit up, but it was just dark black. I tried to wipe the system and flash the ROM again and at the end of the process, an error message appeared and I looked up the error code and this was exactly it:
"Error 6104
Message: BROM ERROR: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), MSP ERROR CODE : 0X00
Meaning: Wrong flash settings or firmware
Solution:
Ensure you set the correct Download-Agent in SP flash tool and are using a firmware for your exact model
Go to Options > Option > Connection > USB Speed > Full Speed
Go to Options > Option > Download > Untick DA DL All with Checksum"
I did what the solution told me, and as I tried to flash the ROM again, but I couldn't turn on my phone anymore. The volume up + power button combination no longer produces a vibration, and when I plug it into my computer it gets detected as a MediaTek USB Port (COM6) but SP Flash Tools no longer detects my phone and gives off this error:
"Error 0x13BE
Message: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)
Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
Solution:
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Ensure you tick the boxes for only the files present in the ROM you're about to flash"
I don't know what to do at this point. Is it beyond salvation? But my phone still gets detected by my computer and it still produces the sound when you connect a device through the USB ports. Help me please.
Thank you in advance.
Hi , flash this firmware and in Sp Flash Tool set to Download only !!! When you Do Format + Download you lose your imei !
https://drive.google.com/uc?id=12CdmQaP8wi52RZO4jvjSikTWi2l4I1ZN&export=download
Teddy Lo said:
Hi , flash this firmware and in Sp Flash Tool set to Download only !!! When you Do Format + Download you lose your imei !
https://drive.google.com/uc?id=12CdmQaP8wi52RZO4jvjSikTWi2l4I1ZN&export=download
Click to expand...
Click to collapse
Hi there Teddy. Maybe you could help me. I was actually trying to make use of the same thing. SPFT. i flashed the stock rom. i tried rebooting it. seems that it has been bricked. I am using Starmobile Up Prime.
lexpizarro said:
Hi there Teddy. Maybe you could help me. I was actually trying to make use of the same thing. SPFT. i flashed the stock rom. i tried rebooting it. seems that it has been bricked. I am using Starmobile Up Prime.
Click to expand...
Click to collapse
Hi, If you flashed right stock firmware for your device correctly, your device it should not be bricked so I thing your flash file are not good.
Explain me what did you tried and which file you flashed?