For the Swift1 (crackling) i had a ZIP to install via TWRP to get rid of the Secureboot-Check for getting LineageOS to boot at all (radio-20161215-crackling.zip)
On Swift2(x) after unlocking the Bootloader and flashing Custom-Firmwares i get a swift1-similar-looking Menu on Start , but i'm able to boot.
At every Startup i'm able to choose from a Menu to get into Recovery,Fastboot or just 'Start', which then boots my current installed OS.
How to get the Swift2(x) to 'just start without that menu' ?
The only sure way I believe is to relock the bootloader, there is some discussion on a Motorola forum to replace the background with an image that "covers" the text. It is actually still there but barely visible. It involves fastboot flashing of a certain partition, but I don't know if it is relevant to our device. I've tried to id the partition but every input (cat /proc/, etc) gives incomplete or no information.
https://www.google.co.uk/url?sa=t&s...FjAKegQIAxAB&usg=AOvVaw1jWDHy3H9wi1-W-JAOoXx0
Related
Hello all,
Apologies if this is not the right section to post - though it might be if I'm able to lift the ROM off this engineering device
I've been trying to root/change the ROM of this sample Streak device I have access to, but to no avail. It's SIM unlocked, but clearly is an earlier SW (possbily HW) version. There's no access to fastboot (pressing the camera on boot gets me to the engineering test menu, no fastboot option).
Here's some additional information:
Modem (Baseband) Version: AUS_************51
Model Number: M01M
OEM Version: Unknown
Build number: 77910
Any ideas?
Thanks
jkbuha
I'd ask Paul at modaco. He seems to know his way around rooting..
Sent from my Dell Streak using Tapatalk
Thanks for the tip fards - I didn't really want to trouble Paul, but seeing as no one here has any ideas I'll drop him an email and see what his thoughts are.
cheers
jkbuha
photo of the engineering menu please
this sucks
Heres the boatloader !!! My touchscreen wont calibrate either nor will it go into fastboot!!!!!!!!!!!!!
Try using the androot.apk since it doesnt require fastboot.
well 1% progress...
im rooted but i cant downgrade or flash any rom im afraid to flash clockwork....I just found out how to get fastboot even on that screen tho!!!!!!!!!
thats interesting, australian version?
in any case, you can either root it via the universal root tool and do a nandroid backup, or you can yaffs2 it.
you need linux os on your computer, yaffs2, and the system folder from your device
Code:
# cd /where/your/dumped/system/folder/is
# ./mkfs.yaffs2 system /system.img
# exit
i have an engineering device too, the one with a sticker under the battery cover. just wondering, is there a FCC number for that one?
Hi I'm back - apos for the delay
So here's an update...
I've managed to semi-brick my engineering (aus?) dell by issuing a fastboot -w and/or a fastboot flash boot/recovery without backing up my system first! Flashing any recovery image so far is unsuccessful.
Here's what I know so far:
Pressing volume down ONLY (not UP) on powerup goes directly to the fastboot menu. Right now that's the only thing that works - no recovery, booting.
I tried to flash the backup nandroid image kindly provided by one of the posters on this forum, but no luck. Boot/Recovery/System works but when flashing userdata with the data.img provided I get an error saying remote: too large.
Not sure if I have an FCC id - I'll check later
Any help appreciated!
if you can get into fastboot, i wonder if you can get into recovery?
its volume up+down+power on boot.
if you cant, try flashing to 2.1 using the american guide and see if it works. your device is already half bricked, so might as well give it a shot.
http://android.modaco.com/content-p...-devices-download-here/page/180/#entry1376331
theres also a few recoveries you can try, but the stock one wont do you any good since you dont have the baseband 51 rom.
Thanks for the link - but same results unfortunately
Pressing up+down on power on takes me to a menu which says:
1) factory reset
2) update from .zip (NOTE: not pkg)
3) reboot
When pressing the second option the screen goes blank (I'm assuming it's trying to launch recovery) and depending on what recovery I've flashed it either goes to fastboot mode or the two icons start flashing on/off then stop altogether. It's never gone to a proper recovery menu, irrespective of the imgs I've flashed.
Anyone has a link to
(i) a humongous backlog of recovery roms
(ii) a set of nandroid img backups for the streak
Or any other ideas?
Thanks
jkbuha
Sorry to make my first post a request for help. Here's what happened.
I have a model KIW-L24 Honor 5X, with code-name kiwi with TWRP and Lineage OS 15.1 installed. Last night (today?) at around 2 AM PST or so (not sure of the exact time, I would have looked on my phone) my phone suddenly rebooted into recovery. I waited for the menu to pop up or something, but instead it eventually rebooted again. After that, every boot consists of "Boot/Recovery image verify failed!" "Please update to the authorized images." and then brings up the fastboot screen, which proudly displays "PHONE Locked" in green and "FRP unlock" in red. From what I understand, this means that the bootloader is locked (again).
Now, in theory, I can re-unlock the phone (once I find the relevant code again), flash lineage os again, and continue on my merry way. However, I have a password manager on my phone (Keypass2Android) that has not been backed up recently, so it would be preferable if I could recover that, at the very least. I've already tried booting both a custom recovery image and a stock recovery image via
Code:
fastboot boot <image>
but it only came back with
Code:
FAILED (remote: Command not allowed)
so I can only conclude that I cannot boot arbitrary images while the boot-loader is locked.
So, here's my options as I see it:
Unlock the bootloader again, wiping the device.
Flash stock, hope that that doesn't wipe my data. (EDIT: if it doesn't, hope that it doesn't bootloop or something requiring me to wipe)
Find some other method of recovering data from the device.
So, my questions are: how might the bootloader have gotten locked in the first place? Is there anything I can do to recover data, especially my password manager data? Please let me know if there's any other information you need.
Thanks in advance, regardless of the answer.
Hi All,
With the recent launch of LineageOS 18.1 I decided to take the plunge and get it installed on my fully stock Videotron/Freedom H915. Since I had to smash together info from a half dozen other threads, I figured I'd gather it all together here for folks with a Canadian phone trying to make this work.
Since I knew absolutely nothing coming into this, I'm going to go a little more detailed on this write-up. If you've been flashing ROMs since the old days of Cyanogenmod you can probably skim half of this.
Disclaimer : I'm not responsible for any bricked phones or other negative outcomes. This is what worked for me, but I'm far from being an expert. If you continue past this point you agree to take your time, do your reading, be responsible for your own device/actions and not hold me or the forum accountable for anything that might go wrong. You've been warned.
IMPORTANT NOTE #1
If you've picked up an H915 on ebay and you are intending to use it on a network other than the one it's SIM locked on, make sure you do the whole SIM unlock process on the stock ROM either before you get started at all, or once you've reverted to the vulnerable stock ROM after Step 1 below.
I actually use Telus as my provider and I wasted a bunch of time trying to figure out why I couldn't get signal because only the stock ROM will prompt you for a SIM Unlock code. Lineage will just sit there dumbly and not allow you to enable data.
Once you've unlocked the SIM it will stay unlocked from that point forward, just make sure to unlock it and verify your SIM is working with LTE on the stock ROM before you get started.
IMPORTANT NOTE #2
Use LGUP's "DUMP" feature to take a backup of ALL partitions on your phone before you start. If you're reading this thinking "I just bought this phone off ebay, there's nothing on it I care about", take the backup anyway. You never know when you might need a copy of the modem partitions or other things from your phone's original build. It came in super handy for me in troubleshooting the process. So go do a backup!
Current Issues:
If signal is too weak to connect to a tower (or non-existent), the OS tends to crash with a modem error. Still trying to figure this one out.
I think I can get this working without first jumping to US996 but haven't had a chance to verify that. If I do I'll update the thread.
Download Prerequisites
Links working as of 2021-06-29
LGUP with patch
Link
Working adb/fastboot environment
Instructions
Download
Fastboot Drivers
Link
Universal ADB Driver
Link
Videotron/Freedom H915 Android 7 (Nougat) version E - H91510e_00_VTR_CA_OP_1205.kdz
Link
USA General US996 Android 7 (Nougat) version F - US99610f_00_1205.kdz
Link
APK for Terminal Emulator
Link or Alternate Link
LG V20 Root Package Original (v4?)
Link
Old TWRP for Root Package
Link
Videotron/Freedom H915 Modem Partition Image
Link
Lineage Install Zip for H910 (grab the latest, I'm using lineage-18.1-20210506-nightly-h910-signed.zip which is already out of date)
Link
MindTheGapps
Link
(Optional, for rooting) Magisk
Link
Different Boot Modes
For those not familiar with these phones, there are three different "modes" the phone can boot into. Here's a quick reference on how to boot into each one.
Download Mode
This mode is used for pushing KDZ files or individual partition backups using LGUP
Turn Off Phone
Hold the Up-Volume Button
Insert USB-C Cable with other end already plugged into PC
Bootloader (aka Fastboot) Mode
The H915 doesn't come with this mode by default. If you try it, you'll just get battery charging. We'll be temporarily converting the phone to a US996 in order to use the DirtySanta exploit to replace the bootloader partition with a leaked Engineering aboot.
This mode is used with the fastboot tool to load the TWRP utility into the Recovery partition.
Turn Off Phone
Hold the Down-Volume Button
Insert USB-C Cable with other end already plugged into PC
Recovery Mode
The recovery mode on a stock phone is used to perform a factory reset. We will be using the Factory Reset a couple times with the stock ROMs, then replacing the contents of the recovery partition with the TWRP tool that allows us to format partitions, load partition images, and sideload apps and LineageOS itself.
Turn Off Phone
Hold the Down-Volume Button
Press and hold Power-On (rear fingerprint sensor/button). When LG Logo appears, release power button for 1 second then press and hold again
When "Factory Data Reset" appears, release all buttons
Press Volume Down to highlight "Yes" then press power button to select the option
Repeat for the confirmation
Note about flashing KDZ files using LGUP
You can flash KDZ files onto the phone using LGUP from two places - either with the phone in "Download Mode", or with the phone booted into the OS with the USB Options set to "File Transfer" and USB Debugging turned on.
The difference between these two is when it performs the OS compatibility check.
In Download Mode it's the code of the Download Mode partition that does the check. In the OS, it's the OS that does the check before booting to Download Mode and bypassing Download Mode's check.
Why is this important? Because when converting from one phone to another (Say, an H915 to a US996 like we do below), you initially can't flash the KDZ using LGUP's "Upgrade" function. You can only use "Partition DL" to replace the contents of partitions with the contents of the KDZ. This kind of works, but ends up with a phone that will sometimes identify as a H915 (in Download Mode) but sometimes identify as a US996 (in the OS). To clean it up, once you've done the Partition DL method, you can do it again from the OS and use the Upgrade method to get a really clean install.
It works going back the other way as well when you want to return to stock.
If this doesn't make sense, don't worry. You don't need to fully understand it to follow the instructions below, I just found it to be interesting info that didn't seem to appear in other threads.
Process Overview
Revert the phone to an old/vulnerable stock Nougat ROM for Videotron/Freedom Mobile
Enable Dev Options
Dump contents of US996 KDZ partitions over top of existing partitions
Cleanup by re-flashing US996 KDZ partitions over top of existing partitions
Transfer files to the SDCard and install Terminal Emulator
Unlock the Bootloader using the DirtySanta exploit
Boot to old TWRP and install new TWRP
Boot to new TWRP, install LineageOS, Google Apps, and flash modem partition image
Reboot to LineageOS
Actual Process
1 - Revert the phone to an old/vulnerable stock Nougat ROM for Videotron/Freedom Mobile
We need to be on Nougat for this to work, so if you're on Oreo you have to downgrade to Nougat before we begin. I chose a Nougat ROM for the H915 that's vulnerable to the DirtySanta exploit because I know it works and because I'm hoping in the future to be able to skip converting the phone to a US996 if possible.
Boot phone into Download Mode
Launch LGUP with Patch
Select "Upgrade" radio button
Select bin file : H91510e_00_VTR_CA_OP_1205.kdz
Click Start
When finished phone will reboot
1.5 - Do this if Step 1 Failed... Otherwise continue to Step 2
Depending on what's loaded on your phone when you start, it might complain about doing Step 1. This should allow us to bypass the issue and allow Step 1 to work. You can use this step if you've already converted the phone to another model as long as it's not bricked.
Boot phone into download mode
Launch LGIP with Patch
Select "PartitionDL" radio button
Select bin file : H91510e_00_VTR_CA_OP_1205.kdz
Click Start
Click the "Select All" partitions checkbox and click OK. When done it will reboot.
If it hangs or loops on reboot, boot into "Recovery Mode" (which at this point will Factory Reset the OS)
The phone boots into the OS
Quickly go through setup wizard. Skip as many things as possible.
Go Settings - General - About Phone - Software Info - Make sure it identifies as H91510e
Change the USB Option mode to "File Transfer"
Then repeat Step 1, but from inside the OS instead of in Download Mode
2 - Enable Dev Options and File Transfer Mode
We need these enabled after every time we flash the OS so that our LGUP and adb commands will work. You'll get used to doing these steps a bunch.
Quickly go through setup wizard. Skip as many things as possible.
Unplug USB-C cable
Swipe down from the top and change from USB Charging mode to File Transfer mode
Settings - General - About Phone - Software Info
Tap on Build Number many times until it unlocks Developer Mode
Go back 2 menus and enter the new "Developer Options" menus
Make sure "Enable OEM Unlock" is enabled
Enable "USB Debugging" (will be greyed out if USB-C cable is still attached)
Go back to main screen
Plug USB-C cable back in.
A pop-up will appear asking to Allow USB Debugging. Check the "Always Allow" box and tap OK
3 - Dump contents of US996 KDZ partitions over top of existing partition
The Videotron/Freedom KDZ has no Bootloader/Fastboot mode. If you try to enter bootloader mode you'll just end up charging the battery. So we have to cross-flash the US996 KDZ to get a phone with a bootloader which we can then replace with the engineering version using the DirtySanta exploit.
Boot phone into download mode
Launch LGUP with Patch
Select "PartitionDL" radio button
Select bin file : US99610f_00_1205.kdz
Click Start
Click the "Select All" partitions checkbox and click OK
When the phone boots back into the OS, repeat all of Step 2.
Note: If it asks for a password on startup, follow the "Boot to Recovery" steps and since
we don't have anything loaded in the recovery partition it will wipe/erase the phone
and remove the password.
4 - Cleanup by re-flashing US996 KDZ partitions over top of existing partitions
As mentioned in the "Note about flashing KDZ files using LGUP" section above, after you use the PartitionDL method you get a kind of dirty phone image that doesn't always identify as its new model. To clean up, we repeat the process in Upgrade Mode, taking advantage of the fact that at least the OS now identifies as US996 even if Download Mode doesn't. After this, Download Mode will also identify as US996.
Starting booted into the OS with a USB-C cable attached (File Transfer mode, USB Debugging on):
Launch LGUP with Patch
Select "Upgrade" radio button
Select bin file : US99610f_00_1205.kdz
Click Start
When the phone boots back into the OS, repeat all of Step 2.
5 - Transfer files to the SDCard and install Terminal Emulator
We will need some files on the SDCard in the phone in order to install them, either inside the OS (in the case of Terminal Emulator), or later on from TWRP. The Terminal Emulator will be used for the DirtySanta exploit so we need to get that installed now.
Make sure the USB Connection is set to Data Transfer mode and copy the following files to the SDCard:
APK for Terminal Emulator
twrp-3.5.1_9-0-us996.img
h915freedommobilemodem.img
Enable installing apps from unknown sources by:
Settings - General - Fingerprints and Security - Unknown sources (turn it On)
Install Terminal Emulator:
Tools - File Manager
Choose "Allow" when prompted
Click the up-arrow next to "Internal Storage"
Choose SD Card
Scroll down and tap on jackpal.androidterm-1.0.70-71-minAPI4.apk
Install
6 - Unlock the Bootloader using the DirtySanta exploit
The US996 KDZ has a bootloader but it's locked. In order to unlock it we need to use the DirtySanta exploit to give us permissions to replace the Bootloader/Fastboot with a leaked engineering version.
Starting booted into the OS with a USB-C cable attached (File Transfer mode, USB Debugging on):
Settings - General - About Phone - Software Info
Verify that Software Version lists as US99610f
Copy the twrp-3.0.2-1-us996.img file into the folder containing the LG V20 Root Package
Open a command prompt window and change to the folder containing the LG V20 Root Package and run "Step1.bat"
It will push multiple files to the phone and apply some patches/exploits.
This proces will take 5 minutes and put you out at an "elsa:/ $" prompt
At this "elsa:/ $" prompt in your command prompt window type the following:
run-as con
chmod 0777 /storage/emulated/0/*
On the phone, launch Terminal Emulator and run the following:
id
Verify that the string which comes back contains the string "context-u:r:untrusted_app".
If not, run Step1.bat again, else continue forward
Enter the follosing command into Terminal Emulator (be very careful to type it properly):
applypatch /system/bin/atd /storage/emulated/0/dirtysanta
If that command came back with an error, close and re-open Terminal Emulator and try again
The command should begin to patch another file. This will take 5 minutes and will return you to the "elsa:/ $" prompt in Terminal Emulator when it has finished
Open another command prompt to the same folder and run "Step2.bat"
This step will download backup copies of the boot and aboot partitions from the phone then boot the phone into bootloader/fastboot mode.
You'll know it worked if the first line at the top of the phone screen appears in red
In the command prompt window, run Step3.bat
It will flash boot1.img and the TWRP Recovery image multiple times then restart the phone
The phone will hang, no matter how long it's left. Wait 5 minutes (at least until the logo re-loads once) then do the following:
Unplug the USB-C cable
Remove the battery from the phone to turn it off
Replace the battery
Boot into Fastboot mode and run the following commands in your command prompt:
fastboot flash boot bootbackup.img
Remove the USB-C cable and battery to turn off the phone. Then replace the battery and enter Recovery Mode
The phone will show a big red exclamation mark saying "Your device is corrupt". This is normal. It will go away after a few seconds then boot into recovery. This error screen is the result of the engineering "aboot" image that was flashed to give us an unlocked bootloader and will always happen on boot.
7 - Boot to old TWRP and install new TWRP
The old version of TWRP recovery will load. Don't ask me why we can't just go straight to new TWRP above, it didn't work well when I tried it.
If it asks for a password to decrypt data, click Cancel
Swipe to allow modifications
Install - Select Storage - MicroSD Card - OK
Install Image - Scroll down and tap the "twrp-3.5.1_9-0-us996.img"
Select the Recovery partition and swipe to confirm flash
Back to main menu
Reboot - Recovery
8 - Boot to new TWRP, install LineageOS, Google Apps, and flash modem partition image
The new version of TWRP will load:
Check the "Never show this screen during boot again" box
Swipe to allow modifications
Wipe - Format Data - type "yes" to continue
This is likely to fail the first time. Repeat it to properly format the data partition.
Go back to Main Menu - Wipe - Advanced Wipe - Select "Dalvik / ART Cache", "System", and "Cache"
Swipe to wipe
Back to main menu
Advanced - ADB Sideload
Plug in USB-C cable
Swipe to start sideload
In command prompt window on PC type the following:
adb sideload lineage-18.1-20210506-nightly-h910-signed.zip
When complete tap "back" and "ADB Sideload" and swipe again to apply another file:
adb sideload MindTheGapps-11.0.0-arm64-20210412_124247.zip
If you want to root the phone (completely optional, not necessary for this process), now is the time to do it. Tap "back" and "ADB Sideload" and swipe again to apply another file:
adb sideload Magisk-v23.zip
Go back to main menu - Install - Install Image - tap the h915freedommobilemodem.img file
Select the Modem partition and swipe to confirm flash
Remove USB-C cable
9. Reboot to LineageOS
Go back to main menu - Reboot - System - Swipe to reboot
References where I got the info to make this tutorial
Official Lineage 18.1 for LG V20 Release Thread
LineageOS Wiki for H910
DirtySanta Bootloader Unlock and Root Guide (Original)
H910 Rooting Thread (Cross-flash H915 then DirtySanta to US996)
H915 Root, TWRP using DirtySanta [WorkingSignals]
Noob Friendly Root TWRP using DirtySanta
General info about Modem Hardware, Firmware, Radio Interface Layer
[Reserved]
thank you so much. i need it
Great job for writing a complete how-to guide!
Thank You, You saved my old V20 H915
hi have you been able to find a better modem?
btw i'm not able to decrypt under twrp, can you?
Just want to confirm, it's only guide wich works for me. But I have issues with modem:
1. When I tried to change mode of modem, "prefered network type", phone stayed in the loop of the kernel panic "modem crash"
2. It were difficult to revert changes back. Finally, safe mode (in order to get it, you need to press volume up and volume down in the same time, during LinageOS booting process) helped me - when I disabled airplan mode, I had 2-10 seconds until next kernel panic. And in ~10 attempts, I were able to finally switch modem's mode to GSM/WDCMA/LTE
3. I used this phone 3 days, and once the kernel panic (because of modem) happened again
Any ideas what to do with modem? Also, the picture "Your phone is corrupt" is not fan Any ideas how to change it?
I did my best to follow all the instructions but after step 7's reboot I just get blocks full of static. I can tell it's trying to do fresh install setup though from what's peeking through the blocks.
Riot54 said:
I did my best to follow all the instructions but after step 7's reboot I just get blocks full of static. I can tell it's trying to do fresh install setup though from what's peeking through the blocks.
Click to expand...
Click to collapse
This is normal. Flash a kernel that's patched for dirty santa OR, cover the proximity sensor on boot and keep it covered until boot is complete.
That worked, thanks.
After multiple attempts going back and forth with step 6, I finally did it! I might switch to Lighthouse or Arros but I wouldn't have gotten this far without your guide.
I (seemingly) successfully unlocked my Realme's bootloader yesterday, I even managed to get into the bootloader through the DeepTest app, flash TWRP and get into it, but after resetting the phone, the recovery got overwritten by the stock one and now I cannot get into fastboot by any means.
adb reboot bootloader only displays a message for a split second and then reboots into OS again. Which happened before as well.
However, the DeepTest app doesn't show the Check query button (through which I could get into the fastboot) anymore and the only other button there is Apply to exit in-depth test which only displays You can apply to exit in-depth test after carrying out bootloader lock operation in fastboot mode, but tapping on Ok doesn't do anything.
The phone still seems to be working (even fp sensor), I just cannot get into fastboot.
I've also tried flashing the EU (A.54) build to the B.63 build, nothing changed.
How do I resolve this?
/EDIT: I should also mention that after the first wipe (right after confirming bootloader unlock) the DeepTest app was still working as intended, however after the custom recovery was overwritten by the stock one, it started misbehaving as written above. Wiping the internal storage again (through recovery) didn't fix anything as well.
Hi all,
Well, operator error is definitely at fault here... I made a series of mistakes that got me to where I am now. All I intended on doing was repairing my dad's tablet which was running atrociously slowly. I tried to follow some steps, but improvised as I was getting errors and obviously ended up making things a lot worse...
Now tuning on the tablet will directly go to a command line interface with a long series of errors and these are the last 2 lines:
Rich (BB code):
blkD :HardDisk - Alias (null)
PciRoot (0x0) /Pci (0x17,0x0) Ctrl (0x0) /HD(14,GPT,80868086-8086-8086-8086-000000000008,0x646828,0x16D47D8)
blkE :BlockDevice - Alias (null)
PciRoot (0x0) /Pci (0x17,0x0) Ctrl (0x0)
Press ESC in 1 seconds to skip startup.nsh, any other key to continue.
Shell> _
In this state it cannot be interacted with and won't be detected by my PC over USB.
This happens for normal, recovery and bootloader modes. The only mode that I can access is DNX mode but attempting to boot droidboot will result in the same command line UI described above, including when trying to restore the BIOS using the PC executable (which I assume needs to enter fastboot mode, which it can't do...).
What can I do now? Any way to get anything working in the above screen or through DNX?
I'm thinking that a partition was corrupt in addition to me wiping the ESP is causing this. Maybe it's possible to completely format and setup all the partitions and start from scratch again? How can I flash esp.img when all I have access to on the tablet is DNX mode?
Detailed history below...:
HISTORY
1)
The tablet is a Lenovo Yoga Tab 2 1050F. It was running very slowly to the point where my dad just didn't bother to use it. I thought it would be wise to factory reset it as a first step. There is no option to do so within the Lenovo skin of Android so I started by going into recovery mode and performed a factory reset from there.
After it rebooted, the Android UI would loop back to the language selection after connecting to a WiFi network and I would get "Unfortunately Google Play Services has stopped." error message. It would just loop through the Language Selection > Connect to WiFi network pages over and over.
2)
Having installed CM on my old S3 back in the day, I thought I could go about the same process and flash a gapps ZIP file in recovery mode. That didn't work, I got an error because the zip was unsigned.
I thought I could install TWRP to flash unsigned zips, reinstall Gapps and get the tablet passed the Android UI loop.
3)
I followed this guide on XDA to install an unofficial TWRP (which involved unlocking the bootloader). It didn't work because I couldn't flash over ADB (because the tablet couldn't allow Developer Mode since it was stuck in the Android UI loop). So I flashed as many files as I could in fastboot.
I eventually flashed the TWRP recovery.img but that didn't work : when turning on to Recovery mode it would just go back to the bootloader screen.
4)
I thought I must have screwed up something up so I tried to restore the BIOS using an executable I found but I realized the tablet was already upgraded to Lollipop and the only BIOS restoration exe was for Kitkat. Sure enough it got even worse and I could no longer boot Android.
5)
I still had bootloader and fastboot though so I followed a guide to restore the tablet to the original OS (which ironically I already downloaded before trying to get TWRP but forgot about and didn't unpack). I set up Intel Platform Tools but the flash process didn't work because it went to droidboot and then lost USB connection. On the Intel program it would just stay stuck at 20% Wiping ESP. It would time out twice and then give me a final error message.
6)
So I thought to explore the flash.xml file provided to see if I could do the steps manually. I knew it was stuck at wipe ESP because in droidboot it couldn't get commands from PC. So I went into fastboot and wiped ESP manually myself! Little did I know how foolish this was to do because I was simply unable to flash the provided ESP.img again. Following this I lost access to the bootloader.
7)
I found a guide to restore a bricked 1050F here on XDA but it needs droidboot which now goes to the command line UI described at the top of this post. When attempting to restore the kitkat BIOS again, droidboot is also needed which results in the same cmd UI.
8)
Which leads me to where I am now which is that the tablet doesn't boot to: normal, recovery, bootloader/fastboot or droidboot. Which is why I am now asking for help. What can I do?
I'm thinking that a partition was corrupt in addition to me wiping the ESP is causing this. Maybe it's possible to completely format and setup all the partitions and start from scratch again? How can I flash esp when all I can get access to is DNX mode?
Thanks for reading this far and if you have any more ideas, please let me know, thanks in advance.
Hi, would anyone like to weigh in on this issue?