Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this TREBLE
* SUPPORT before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
What is Project Treble:
Project Treble basically partitions your device into two separate partitions, a system and a vendor: system contains your generic system image, while vendor partition has your device specific files required for booting and running your phone. This way we can easily change the system image and be able to run our device on different system images with the same kernel and vendor partition
Read more about Project Treble
What's a GSI?:
A GSI literally means Generic System Image. It is a general system image meant for no specific device. Treble enabled devices have the capability to run a GSI. You can find a GSI here: Phh-Treble
Xiaomi Poco F1 hardware vs Treble implementation:
Xiaomi Poco F1 is an A-only device. This means that regarding the GSI images (GSI = Generic System Image) to be used, you need to get ARM64 and A-Only system images
How to report bugs:
Logcat, a simple description of the bug, kmsg or dmseg depending on the bug
What's Packaged in the zip:
Bootimage
A compressed vendor image
How to use:
Reboot to recovery (Custom TWRP recovery for Poco F1- @TheStrix recovery recomended])
Format /system, /data and /cache
Flash Modified vendor flashable zip package(One we shared. Needs to be flashed only once)
Install the GSI system image you wish to use (How to flash a Generic System Image (GSI) on Project Treble supported devices - Direct link)
Reboot
If GSI doesn't include gapps flash and boot
Important notes:
Formatting data (all user data is wiped, including internal storage) is a must if MIUI was previously installed and device was encrypted.
Working:
Camera (and flashlight)
WiFi
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
GPS
VoLTE
Dt2W
Broken:
Found something? Report it!
Credits:
@abhishek987- for notch overlay
@akhilnarang- for Derp kernel
@vasishath- for helping with this project
XDA:DevDB Information
Vendor for GSI, ROM for the Xiaomi Poco F1
Contributors
Shahan_mik3
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest GSI prefered
Version Information
Status: Beta
Current Beta Version: r1
Beta Release Date: 2018-10-04
Created 2018-10-04
Last Updated 2018-10-04
FAQ: WIP
Why should I flash this?
for below reasons
VoLTE
Proper Notch support
Adaptive brightness (next build)
How do I use this?
Just follow below steps
Flash vendor zip
Flash the appropriate gsi image
Reboot
If you want to use gapps
After booting Restart to recovery
flash gapps
I have no 4g signal? is it gone forever?
Check network settings and switch to 4g
Volte Isnt working??
Check APN if not present create one and reboot. If present just reboot
Hotspot is not working..help!!!!
This is known issue in GSI kindly always use phh's latest build (Recommended)
"insert some rom name here" has an issue with feature
Contact the maintainer of that rom
I am already using GSI. What should I do?
Just flash vendor.zip and reboot
Can I flash Custom kernels?
No. That's why we have included Derp kernel by default
Can this be flashed for any other reason?
NO This is just for PIE/9.0(GSI images). If you plan on experimenting please dont report on thread.
Can I Flash Oreo GSI after flashing this vendor?
No. This supports only Android Pie
Stock MIUI Vendor Links thanks to @akhilnarang
Based on MIUI 8.9.20 Global dev vendor
https://mirror.akhilnarang.me/MIUI/beryllium-8.9.20-vendor.zip
https://downloads.akhilnarang.me/MIUI/beryllium-8.9.20-vendor.zip
WARNING: If you want to flash NORMAL ROM[LOS etc] again just flash STOCK VENDOR. Flashing los/other roms directly on this modified vendor might cause unwanted BUGS
Note: flashing stock vendor will encrypt the phone so dont forget to flash "Disable force encrypt zip".
Modified Vendor Download Link - Read FAQ first before downloading:
Vendor-r1 [Oct 4] :https://www.androidfilehost.com/?w=files&flid=283334
Tested on below mentioned Pie GSI
AOSP Pie by phh
Pixel experience
Benzo
Descendant Rom
Things planned to be done in FUTURE releases
Adaptive brightness
Remove HD notification
Better notch support
things will get added on later
Supported GSI can be found below
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Few ScreenShots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Poco F1 official telegram group
https://t.me/PocoF1official
Thanks af thug Peru sar
Nice work!
can i flash vendor __ already using pixel pie gsi
charanreddy said:
can i flash vendor __ already using pixel pie gsi
Click to expand...
Click to collapse
Yes u can
Nice work
Shahan_mik3 said:
Modified vendor download link:
Vendor-r1 [Oct 4] :https://www.androidfilehost.com/?w=files&flid=283334
Things planned to be done in upcoming builds
Adaptive brightness
Say goodbye to HD notification
Better notch support
things will get added later on
Supported GSI can be found below
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Click to expand...
Click to collapse
My bad, what is HD notification?
Quick question. Can this vendor be used for miui ROMs as well (because it'll be easier to port MI8 Pie if vendor support is available)
---------- Post added at 05:18 PM ---------- Previous post was at 05:14 PM ----------
denzel09 said:
My bad, what is HD notification?
Click to expand...
Click to collapse
In some 8.1 and mostly 9 ROMs you have a notification which can't be dismissed saying "device is HD capable" if you have VOLTE. This will get rid of that annoying slot for you.
If i flash any custom rom made for oneplus 6(or any devices) on poco f1 and then flash this vendor file. The question arrises will it work nicely? If it does we can use limitless roms we want ....... :good:
Installation Procedure:
- Clean / Format
- Flash vendor zip by Mik
- Flash Pie system.img
- Boot into the system
- Reboot to Recovery
- Flash Open Gapps + Magisk (if u want to root)
Hi, I've been experiencing bootloops both in HavocOS and PE, and when I rebooted to TWRP the data partition is encrypted. Is that normal or have I missed a step?
NVM, FML, I was installing the stock miui vendor file instead of the vendor-r1 file. Installed vendor-r1 file and everything works fine. thanks!
i need help plzzzz help me out
Shahan_mik3 said:
Modified Vendor Download Link - Read FAQ first before downloading:
Vendor-r1 [Oct 4] :https://www.androidfilehost.com/?w=files&flid=283334
Tested on below mentioned Pie GSI
AOSP Pie by phh
Pixel experience
Benzo
Descendant Rom
Things planned to be done in FUTURE releases
Adaptive brightness
Remove HD notification
Better notch support
things will get added on later
Supported GSI can be found below
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Few ScreenShots
Click to expand...
Click to collapse
make video of installation on poco bze same method i tryed but after installation its booting to fastboot can you help me though video plzzzzz
and can u make oxgenos for poco
Shivakumar132 said:
make video of installation on poco bze same method i tryed but after installation its booting to fastboot can you help me though video plzzzzz
and can u make oxgenos for poco
Click to expand...
Click to collapse
If coming from miui
Format to remove encryption
Flash system image
Flash vendor zip
(tested aosp, aex, pe, benzo) try any of these
There is an oxygen os semi gsi port u can check that thread
Does gsi of oxygen os boots ...
Top job! Thanks for your work.
What's the difference between GSI and Semi GSI? Will this vendor partition work with both?
Wow ,working excellent on or gsi, dual volte working too. Is this real for real.
Any of the equalizers(including playstore ones) are not working in AOSP GSI? Anyone else facing this problem? Is it vendor related issue?
Havoc OS 2.0 Working thanks!!!
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
Click to expand...
Click to collapse
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte
Headset
Known issues:
1) Headset won't get connected
2) Sometimes Recents Panel FC
and You tell please.
Please read full OP and flashing instructions carefully
Some story about what we did actually to get treble
** We have interchanged partitions like oem= cache and cache= vendor to get treble support. Thanks to @warrenlobo for this idea.
** As our oem partition is 100% unused so no problem with booting custom ROMs.
Instructions :
1) Reboot to recovery
2) Flash Treble-TWRP image
3) Right after flashing Treble TWRP, Boot into recovery again
4) Now wipe/format cache. ( if this UI option doesn't work then use TWRP terminal command as " make_ext4fs /dev/block/bootdevice/by-name/oem" without quotes) now you are good to go
5) Now choose Treble ROM.zip to flash
6) Flash Gapps ( pico gapps are always recommended )
7) Flash Lineage add-on ( Check Faq 4) to get root or you may flash Treble enabled Magisk
8) Now reboot to system.
How to flash GSI ( Generic System Image):
1) Reboot to recovery
2) wipe all partitions except /vendor and storage
3) Now choose Install >> Install image >> choose image >> choose system_img >> Swipe to flash
4) now you may flash GApps as usual and (optional) Root it from Lineage add-on ( Check Faq 4) or from Magisk
5) Reboot to system
*** now TWRP will warn you about "" No OS Installed "" now please ignore this message and swipe to reboot. ***
Please do not use Lineage Root add-on for now , because it may cause boot loop. And this is because of binders and this will be fixed soon ( Check Faq 4 )
I think now its all cleared and please ask any doubts about this treble ROM before flashing
Faqs:
1) Are you thinking about, How to go back to normal ROM?
** Its very easy
** Just wipe all Partitions except storage
** Flash Roms Normally ( clean flash )
2) Is this Recovery works with normal ROMs?
** Yes ( flash any normal ROMs without any hesitation)
3) What's the difference with previous build?
** This is a test build for trying to boot some semi-GSIs(like MIUI 10 ARM),but since it switch to use 64 bit binder,you may have to flash GSIs built with 64 bit binder,but there are no much GSIs built with it.
You may experience stuck on splash with some GSIs.And most GSIs with 64 bit binder are larger than the space of system partition on our device.Thus if you have not much experience with it,don't flash it.
4) Can i flash Lineage Root add-on on 64bit binder enabled Treble ROM?
** Yes ( Please make sure that you flashed lineage root add-on on Treble 64bit binder enabled treble rom, if in case you flashed lineage root add-on on 32 bit binder enabled treble rom you might stuck with bootloop)
( more questions will be available with updates)
Sources:: https://github.com/wt88047-treble
Contributors:
Many thanks to @mkfslsxbin for treble support
Many thanks to @Azim Javed and @kundan jangir and @hiren_fi as a testers
- balika011 [Open Source Kernel]
- Kumajaya
- nicknitewolf
- ssawrav
- Premaca
- and Testers of Telegram Group
without them this project is empty ( Please PM me if i missed someone)
Downloads
1) Treble enabled 32bit binder Lineage ROM : Redmi 2/Prime (wt88047)
1.1) Treble enabled 64bit binder Lineage ROM : Redmi 2/Prime (wt88047)
2) Treble enabled TWRP Recovery : Twrp (wt88047)
3) GSI links ( Please flash arm system images) : ARM GSI Links
4) New AOSP Pie GSI is available by @phhusson so you can flash this too but volte and Headset are not working
XDA:DevDB Information
[ROM][ARM][TREBLE][VOLTE][8.1.0][Unofficial][Lineage OS][Redmi 2/Prime][wt88047], ROM for the Xiaomi Redmi 2
Contributors
karthik km, mkfslsxbin
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Lolipop and Treble TWRP 3.2.x
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2018-09-03
Created 2018-08-26
Last Updated 2018-12-30
Reserved
some screenshots
more will soon
Changelog Section
My friend @Sansky12 created one new telegram bot which will guide you throughout the process of
1) how to install treble rom
2) how to install GSI
3) reporting bugs
4) and more features will be available soon
So please have a look over here
https://t.me/skynite_bot
New Build is live dated 03-09-2018 Thanks to @mkfslsxbin for building ROM and fixing Bugs.
Changes
* Fix overlay related issues
* Fix OMX issue
* Fix recent panel crash
This changes are related to Android Oreo
Update for Android P
** This is almost unstable for now **
Bugs currently on Pie
* Audio
* Video
* OMX(App layer)
* IMS
* All other bugs in GSI thread
Download New Treble ROM
Lineage-15.1-Treble
Way to go, sir!
Amazing Job guys
Congratulations @karthik km @mkfslsxbin @warrenlobo
Cheers..........
Azim Javed said:
Way to go, sir!
Click to expand...
Click to collapse
Ofc you are the pru tester
kundan jangir said:
Amazing Job guys
Congratulations @karthik [email protected]@warrenlobo
Cheers..........
Click to expand...
Click to collapse
Congratulations to you also
CU'Z we are all included in it
As we are all good Friend's
Now OP is all good
Checkout once
Thanks
Wow
since I'm noob in treble world, but I have 2 questions:
(1). is in treble/ or after we flash gsi image, we still have a costumization? (example like: qs tile row/columns/xposed/ etc... like in normal rom??)
(2). please add a guide on how to revert to normal rom from treble. (incase someone wants to go back to normal rom).
thanks in advance.
Finally! Pru dev
xehed said:
since I'm noob in treble world, but I have 2 questions:
(1). is in treble/ or after we flash gsi image, we still have a costumization? (example like: qs tile row/columns/xposed/ etc... like in normal rom??)
(2). please add a guide on how to revert to normal rom from treble. (incase someone wants to go back to normal rom).
thanks in advance.
Click to expand...
Click to collapse
1) all customization are depends on GSI
2) you can easily go back to normal ROM and also no need to change recovery also this recovery works well for normal ROMs too
If you go back to normal ROM
Just clean / wipe all partitions except storage then flash the ROMs normally
OK I will update this in OP
karthik km said:
1) all customization are depends on GSI
2) you can easily go back to normal ROM and also no need to change recovery also this recovery works well for normal ROMs too
If you ho back to normal ROM
Just clean / wipe all partitions except storage then flash the ROMs normally
OK I will update this in OP
Click to expand...
Click to collapse
ok, I got it, that clear enough explanation :good:
@karthik km any plans to treble arm64?
Cecell3000 said:
@karthik km any plans to treble arm64?
Click to expand...
Click to collapse
No fully 64bit compatible vendor blobs available for our device
@karthik km the OP has android 9 screenshot....but it says the ROM is based on Android 8.1
If you can help me sir? How's a treble ROM different from a Normal one?
@karthik km
I used your first test version of treble 64bit (sourceforge) with treble vendor partition of redmi3.
The rom is bootable, but is unstable, has no audio or camera, I have no knowledge to solve.
[port][rom][arm64][treble][unstable][oem-vendor]
link: https://www.androidfilehost.com/?fid=1322778262903991648 (Attention, experimental use at your own risk.)
hope it will be useful in developing your rom.
vector007 said:
@karthik km the OP has android 9 screenshot....but it says the ROM is based on Android 8.1
If you can help me sir? How's a treble ROM different from a Normal one?
Click to expand...
Click to collapse
This treble ROM is based on Androd 8.1 but you can flash Pie GSI as i did
clear now
How's a treble ROM different from a Normal one?
Check here
https://source.android.com/devices/architecture/
karthik km said:
This treble ROM is based on Androd 8.1 but you can flash Pie GSI as i did
clear now
How's a treble ROM different from a Normal one?
Check here
https://source.android.com/devices/architecture/
Click to expand...
Click to collapse
Got it sir
But will that erase the internal storage??
Cecell3000 said:
@karthik km
I used your first test version of treble 64bit (sourceforge) with treble vendor partition of redmi3.
The rom is bootable, but is unstable, has no audio or camera, I have no knowledge to solve.
[port][rom][arm64][treble][unstable][oem-vendor]
link: https://www.androidfilehost.com/?fid=1322778262903991648 (Attention, experimental use at your own risk.)
hope it will be useful in developing your rom.
Click to expand...
Click to collapse
cool lets see
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Unlock Bootloader
Boot into recovery
Make Sure you have already flashed Unjustified Devs Los16 rom.
Go to install/select install image/look for sGSI image/select system/swipe to flash.
Factory Data reset
Go into Wipe/select system/advance wipe/ hit repair then hit resize(SHRP recommended as twrp gives issues on this step)
Flash Gapps
Flash Magisk Root(Optional)
First boot may take up to 10 minutes.
Dirty Flash:
Go to install/select install image/look for sGSI image/select system/swipe to flash.
Go into Wipe/select system/advance wipe/ hit repair then hit resize(SHRP recommended as twrp gives issues on this step)
Flash Gapps
Reboot
sGSI Download Axon 10 Pro
GApps
Resurrection Remix Source
Andy Yan los gsi build script
First and for most UnjustifiedDev for all of his amazing work and support for our device.
The combined efforts of me and Daysun on my telegram channel, from me pointing at the cause of our fod not working on most gsis to Daysun finding the phh patches that needed to be removed in order for our fod to work, and his edits to Andyyan script to suit our device.
XDA Developers
PHH for his GSI patches, without his GSI efforts this would not be a possibility.
AndyCGYan for his amazing los gsi build script.
LineageOs Team
AICP
Crdroid
AOSIP
DU
Xtended
Evolution X
Bliss
Omni Team
And Of Course To All The Supporters, Donators And Users
Join our telegram channel!
What's Working:
-Boots
-RIL (Calls, SMS, Data)
-Fingerprint
-Wi-Fi
-NFC
-Bluetooth
-Camera
-Camcorder
-Video Playback
-Audio
-Sensors
-Flash
-GPS
-Volte
-Wireless Charging
BUGS:
You tell me
Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
After downloading the Catlog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
XDAevDB Information
Resurrection Remix, sGSI for the Axon 10 Pro
Source Code: https://github.com/ResurrectionRemix-Devices, https://github.com/AndyCGYan
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Pie or A10
Based On: Lineage OS
Version Information
Status: Beta
Current Stable Version: 8.6.3
Stable Release Date: 2020-10-29
Created 2020-10-04
Last Updated 2020-12-26
Change Log:
03.07.21:
RR Upstream changes to 8.6.7
March Security patch
https://get.resurrectionremix.com/ten/changelog/Changelog.txt
01.29.21:
RR Upstream changes to 8.6.6
January Security patch
https://get.resurrectionremix.com/ten/changelog/Changelog.txt
12.26.20:
RR Upstream changes to 8.6.5
December 05 Security patch
https://get.resurrectionremix.com/ten/changelog/Changelog.txt
11.14.20:
RR Upstream changes to 8.6.4
https://get.resurrectionremix.com/ten/changelog/Changelog.txt
November Security Patch
10.29.20:
RR Upstream changes to 8.6.3
Added VoLTE props mostly for t-mobile users like my self
October Security Patch
10.04.20:
Initial release
Screenshots
Guys i was made aware that sdcard is not been detected, i uploaded the wrong build, re uploading now, i apologies.
Update:Uploaded Correct version, now with gapps included.
i think this is the best rom for our device runs well no bugs ... .greetz and beer
noobstyle1337 said:
i think this is the best rom for our device runs well no bugs ... .greetz and beer
Click to expand...
Click to collapse
Indeed, also battery life is outstanding, glad you like the rom.
hello from me too!
I would like to know if the camera and fingerprint work perfectly?
Everything works unless stated otherwise, camera is not like stock, never will be but you can take pictures and record video.
is call recording like the Chinese stock ROM working?
37_ said:
is call recording like the Chinese stock ROM working?
Click to expand...
Click to collapse
From what i can gather if the option is legal on your country it will get enabled automatically.
37_ said:
is call recording like the Chinese stock ROM working?
Click to expand...
Click to collapse
Just double check the option is there on default dialer the rom ships with.
New release in OP, enjoy guys.
Hi, sorry for disturb, how can i flash this ROM ? i have unlock a bootloader. i have DL the rom but is ***.img.xz. I have tried to flash LOS16 but i bootloop with TWRP. anyone can explain how i can flash a ROM PLS ???
Thanks
Ilaska33 said:
Hi, sorry for disturb, how can i flash this ROM ? i have unlock a bootloader. i have DL the rom but is ***.img.xz. I have tried to flash LOS16 but i bootloop with TWRP. anyone can explain how i can flash a ROM PLS ???
Thanks
Click to expand...
Click to collapse
The sGSI is compressed, use 7zip to uncompress it,once you uncompress it flash the system.img you extracted with the instructions on first post, what device model do you have? where are you boot looping zte screen or bootanimation?
rafyvitto said:
The sGSI is compressed, use 7zip to uncompress it,once you uncompress it flash the system.img you extracted with the instructions on first post, what device model do you have? where are you boot looping zte screen or bootanimation?
Click to expand...
Click to collapse
Hi, thanks for reply. I have an A2020G. I have BL in bootanimation. And If I want to replace a ROM, I have to unlock the bootloader, otherwise I will get an error message every time I reboot the device.
Ilaska33 said:
Hi, thanks for reply. I have an A2020G. I have BL in bootanimation. And If I want to replace a ROM, I have to unlock the bootloader, otherwise I will get an error message every time I reboot the device.
Click to expand...
Click to collapse
Im confused did you unlock bootloader and flashed twrp, or just flash los16 with fastboot,?
rafyvitto said:
Im confused did you unlock bootloader and flashed twrp, or just flash los16 with fastboot,?
Click to expand...
Click to collapse
Sorry for m'y Bad english. I have unlock bootloader and flashed twrp.
For flash LOS16 i have to flash with fastboot?
Ilaska33 said:
Sorry for m'y Bad english. I have unlock bootloader and flashed twrp.
For flash LOS16 i have to flash with fastboot?
Click to expand...
Click to collapse
Ok after you flashed los16 did format data? if not you wont be able to boot until you do so, as for my rom just use 7zip to extract the system.img and flash it with the instructions i added in first post, since you have a2020G you will need tz.img from a2020u so fingerprint works.
I will try tomorrow to flash LOS16 with Fastboot. Thanks to much
Ilaska33 said:
I will try tomorrow to flash LOS16 with Fastboot. Thanks to much
Click to expand...
Click to collapse
No flash it with twrp or shrp, format internal data, flash gapps and reboot.
Original thread
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Background:
This is a natural continuation/extension of the LineageOS 17.x and 18.x GSIs I've been making since November 2019.
Disclaimer:
This is still mostly a LineageOS team / PHH @phhusson effort, credits to them and all associated for making all this possible.
No flashing instructions will be offered. If you're here in this forum, you should know what you're doing.
No guarantees that everything would work. This is a GSI, bugs are bound to happen.
Download:
https://sourceforge.net/projects/andyyan-gsi/files/
Compressed as .xz archives - extract first.
Vanilla except for these changes:
Modifications needed to make it build/boot/feature-complete
Revived navbar layout tuning via sysui_nav_bar tunable
Disabled "vendor mismatch" warning on boot
Signature spoofing support from MicroG
Default stretch-to-fullscreen (force apps to render in longer than 16:9)
Stuff on GitHub (builders-only):
Since builders' stuff aren't really interesting to end users, I decided not to separately document the modifications needed in this post; instead just check out the scripts/patches, where most things should be self-explanatory: treble_build_los, treble_patches (PHH's treble_patches adjusted for LOS). Not the cleanest code, but should help if you need some clues.
Donate?
https://paypal.me/AndyCGYan
Instructions?
jeeeu94 said:
Instructions?
Click to expand...
Click to collapse
Download and flash system via fastboot or twrp.
MAREK10747 said:
Download and flash system via fastboot or twrp.
Click to expand...
Click to collapse
Hello , for Redmi 7a correct type is treble_arm64_av* ( ARM 64-bit, A-only ) ?
kosmasgr said:
Hello , for Redmi 7a correct type is treble_arm64_av* ( ARM 64-bit, A-only ) ?
Click to expand...
Click to collapse
Not only , A/B works too , but updates update only A partition . You can use A/B image , I have A/B image from @phhusson GSI . For use arm64 images you must patch your device to arm64 . Bases for arm64 is everywhere , but after install base files you can make upgrade to my gameing firmware for better performance .
MAREK10747 said:
Not only , A/B works too , but updates update only A partition . You can use A/B image , I have A/B image from @phhusson GSI . For use arm64 images you must patch your device to arm64 . Bases for arm64 is everywhere , but after install base files you can make upgrade to my gameing firmware for better performance .
Click to expand...
Click to collapse
Thanks , im on crdroid android 10 now and twrp 64 bit istalled
Planning to try this ROM soon,
Any feedbacks?
Thanks.
kosmasgr said:
Thanks , im on crdroid android 10 now and twrp 64 bit istalled
Click to expand...
Click to collapse
If TWRP 64 bit installed, can I use ARM64 or just ARM?
Hi, I'm using 64-bit TWRP and am currently using the Redmi 8 MIUI 12 port. (So I have the 64-bit base). What treble version will work for Redmi 7A?
Hello, Do you need to expand the system to install?
Good ROM. The attempt to install gapps failed. How to solve it?
thank you.
Hi and thanks, yes, latest GSI android 11: AOSP 11.0 v300.m by phhusson working on my Redmi 7A pine (16GB) absolutely properly.
I used TWRP 64bit 3.4: https://androidfilehost.com/?fid=10763459528675581361 , Wiped system, cache, data and Format data, then flash this base: https://drive.google.com/uc?id=1MWxfIf3AepQIGFXDPTpRnZ1G9fnTkheY&export=download and after that flash this version of GSI (including gapps): https://github.com/phhusson/treble_....m/system-roar-arm64-ab-vndklite-gapps.img.xz and looks like everything working good, even bluetooth and GCam 8.1!
(Magisk no work, any versions, but in GSI is inbuilt some type of SU and it is working.)
Only infrared not working in my device and after restart I see info about "intrnal error in device....." (dismatch vendor prop probably or somwthing like that), but when i closed window, it have not effect on functionality - everything exclude infra working like a charm!)
(For PC transfer data you must set in developer settings type of USB connection on transfer, and then is working!)
when in twrp the lineage rom doesnt show but it does when viewing on my computer
Hello,
i´ve "tested" this ROM on my Xiaomi Redmi 7a but it dosen´t boot after flashing with TWRP.
- lineage-18.1-20210212-UNOFFICIAL-treble_a64_bvS
- lineage-18.1-20210212-UNOFFICIAL-treble_a64_bvS-vndklite
TWRP says: "Image Flashing successfully".
After the press on the "System-Reboot-Button" TWRP warns me that no OS is installed.
After the Reboot the Phone boot only to TWRP.
With 17.0 and 17.1 Images i have no problems to boot after flashing.
Sorry for my bad english.
EDIT 2021/03/20: After Upgrade my Xiaomi Redmi 7a to 64bit the ROM is booting after flashing with TWRP.
- lineage-18.1-20210212-UNOFFICIAL-treble_arm64_bvS-vndklite
- lineage-18.1-20210317-UNOFFICIAL-treble_arm64_bvS-vndklite
But I have 2 huge Bugs with both ROMs:
1. Can´t decrypt Data with PIN or Password in TWRP (TWRP says everytime: password incorrect)
2. Data-Transfer over USB to PC doesn´t work (not selectable)
lineage-18.1-20210317-UNOFFICIAL-treble_arm64_bvS-vndklite has 2 more little Bugs:
1. No Ringtones are selectable
2. Design & Backgrounds are not accessible from Homescreen
Greetings. Everything works well, thanks. Is it possible to add FaceUnlock (Face ID) to Lineage 18.1 on my Redmi 7A? Using magisk or TWRP?
Zwer121 said:
Greetings. Everything works well, thanks. Is it possible to add FaceUnlock (Face ID) to Lineage 18.1 on my Redmi 7A? Using magisk or TWRP?
Click to expand...
Click to collapse
you have tutorials bro?
Hi guys.
I used a different way:
coming from Stock Rom (V11.0.3.0) --> from https://c.mi.com//miuidownload/detail?device=1900369 via Miflash
fastboot unofficial twrp 3.3.1.1 pine --> from https://www.mediafire.com/file/irntn5ccdiguuuu/TWRP-20191023-3.3.1.0-pine.img/file
format & wipe
flash fw+vendor-arm64_pine_11.0.11GLOBAL-v1.2.zip --> from http://www.mediafire.com/file/yz5o5fn7yx9zkgv/file
and yes this is a higher version than this:
Axident1973 said:
then flash this base: https://drive.google.com/uc?id=1MWxfIf3AepQIGFXDPTpRnZ1G9fnTkheY&export=download
Click to expand...
Click to collapse
then i flashed different .img files:
1st.
this Rom from
[ROM][9.0][OFFICIAL][PINE][NIGHTLY][SHARE] MoKee Open Source Android Project
/* * I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...). * Please do some research if you have any concerns about features included in the...
forum.xda-developers.com
but the new Android 10 version --> from https://download.mokeedev.com/pine.html
boots completely but crashes then
2nd.
system-roar-arm64-ab-vanilla.img --> from https://github.com/phhusson/treble_experimentations/releases/tag/v304
after startup "internal android error" occures but it works
haven'd tested much, but didn't noticed any bugs in the first place. stock camera and brightness works.
3rd.
suggeted lineage-18.1-20210411-UNOFFICIAL-treble_arm64_bvS.img rom --> from https://sourceforge.net/projects/andyyan-gsi/files/lineage-18.x/
works but with flickering brightness sensor
so i repeated it, and the second time it works fine
then another try with flashing magisk --> from https://magisk.me/zip/
but ramdisk = No
so not possible? (only in recovery mode)
and flashing fm fix --> from https://androidfilehost.com/?fid=8889791610682885147
What's working:
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
Not tested:
GPS
VoLTE
ViLTE
Known issues:
Notification LED can only be used with white color
signed with public keys (Trust Agent warning)
root only possible with magisk on recovery mode
if i can find a way to root i would be happy with my Android 11 phone
thanks and greetings
I miss the automatic call recording feature in this version. Manual activation on every calls working correctly, but it is impractical.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
awakenOS for Poco F1 [beryllium]
Code:
#include <std_disclaimer.h>
/*
* Your warranty is void. Or...Valid? Probably?
*
* Project Awaken and its maintainers are not responsible for bricked devices,
* dead SD cards, data loss, thermonuclear war, or economic crisis caused by
* Awaken OS. YOU are choosing to make these modifications, and if you
* point your finger at me for messing up your device, I will laugh at you.
*/
Born different, now awaken.
Awaken OS brings consistent, fluent and smooth experience with all your must-have customizations, for you, for the community, for everyone.
- Project Awaken Team -
Saikiran [Founder & Lead Developer]
Ninad Patil [Lead Developer]
Mukul [Developer]
Hugwalk [Lead Designer]
Jagadish [Designer]
Glitch [Designer]
Find us on Telegram! @AwakenOSNews
Display
Fonts, Icon shape & Icon pack customizations
Gestures
Advance reboot menu
Double tap to sleep and wake
Navbar customizations
Three finger screenshot
Toggle torch when screen off
Lockscreen
Notification
Pixel Features
Smartspace
Quick Settings
Brightness slider customizations
Security
Sounds
Cycle through ringer modes
Increasing ring volume
In-call vibration
Link ring and notification volumes
Statusbar
Small mobile type icon
You tell
First Time Install / Clean Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Wipe Cache / Data / System / System_Ext
4. Flash ROM
5. Flash Gapps (optional)
6. Flash Magisk (optional)
7. Reboot to System and #beAwakened
Update / Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash ROM
4. Wipe Cache
5. Reboot to System and #beAwakened
Download Here / Official Announcement / Official Community
Kernel Source / Source Code
Bugs List
Currently : None
• Tell us if you found any bug
Device Changelog
Note:
2 Builds will be made from now onwards:
Vanilla Variant (without gapps inbuild)
Gapps Variant (with gapps inbuild)
Changelog:
19-09-2022
• Switch back to AOSP BT stack
• Updated DPM, IMS, RIL & Wfd system blobs from LA.QSSI.13.0.r1-05300-qssi.0
Can I just update from 2.10
karthikkh20 said:
Can I just update from 2.10
Click to expand...
Click to collapse
Worked flawlessly... Awesome and the easiest upgrade from 12 to 13.. Awesome work guys.... Poco lives for another year.
I updated from 2.10 and it rebooted to recovery with internal memory encrypted. I use the reccomended twrp with sys ext made by Reignz.
Edit: I was not decrypted
Edit 2 : I formated data, loose everything, ok. And then i made a clean install, it's work, but in TWRP my internal storage still encripted. Waht i have to do? I just wanted to do a simple update following the dirty flash tutorial, I swear.
Pavamarea said:
I updated from 2.10 and it rebooted to recovery with internal memory encrypted. I use the reccomended twrp with sys ext made by Reignz.
Edit: I was not decrypted
Edit 2 : I formated data, loose everything, ok. And then i made a clean install, it's work, but in TWRP my internal storage still encripted. Waht i have to do? I just wanted to do a simple update following the dirty flash tutorial, I swear.
Click to expand...
Click to collapse
A13 broken encryption/decryption again in twrp so if u want encrpyted use aosp recovery or flash A13 dfe
REIGNZ3 said:
A13 broken encryption/decryption again in twrp so if u want encrpyted use aosp recovery or flash A13 dfe
Click to expand...
Click to collapse
Ahh, ok. In this case i will wait anothers releases. Apart from this problem with TWRP, I was able to test the 3.0 version for a while and I can say that it is really very good, but I will stay a while longer on 2.10, which is perfect! Thanks for this great work and bringing more life for this "old" phone.
REIGNZ3 said:
A13 broken encryption/decryption again in twrp so if u want encrpyted use aosp recovery or flash A13 dfe
Click to expand...
Click to collapse
Hello REIGNZ3
What if updating from 2.10 to 3 goes wrong (for whatever reason) or i dont like the new rom, and i want to restore my full 2.10 twrp backup: Will it boot after restoring? Will all be there after restoring?
I am asking because: As you know its not possible to restore system_ext partition due to a bug in your twrp v3...
thanks for all the great work
I flashed dfe but still ended up encrypted
I did format data after clean flash for some reason
Found out phone was encrypted when going into twrp to delete twrp folder
Can someone link the latest dfe and system extension link on this thread?
Bug report: hide notch doesn't curve top edges
ashoks89 said:
Can someone link the latest dfe and system extension link on this thread?
Click to expand...
Click to collapse
DFE-Pocof1-A13.zip | by Retrial for Poco F1
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
It didn't remove encryption for me but give it a try
SAGY the MEGATRON said:
I flashed dfe but still ended up encrypted
I did format data after clean flash for some reason
Found out phone was encrypted when going into twrp to delete twrp folder
Click to expand...
Click to collapse
SAGY the MEGATRON said:
DFE-Pocof1-A13.zip | by Retrial for Poco F1
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
It didn't remove encryption for me but give it a try
Click to expand...
Click to collapse
Use TWRP by REIGNZ based on A9 not A12 if you want to be decrypted.
Retrial said:
Use TWRP by REIGNZ based on A9 not A12 if you want to be decrypted.
Click to expand...
Click to collapse
Ohh didn't saw anyone mentioned that anywhere
Retrial said:
Use TWRP by REIGNZ based on A9 not A12 if you want to be decrypted.
Click to expand...
Click to collapse
What will happen if iam both encrypted and rooted and want to dirty flash next update and flash magisk
Will it be alright?
Not able to swipe up to home bug still exists in a13
- 'Set minimum time between notifications' is GONE in Awaken 3.0....
This is super annoying: e.g. if someone sends you multiple messages in a row
Is this a Bug?? Will it come back in future Awaken Versions based on A13??
(I flashed the Vanilla Rom with NikGapps)
Is there a way to make a call from second sim directly from dialler instead of changing the sim settings preference for call and data... Pls add an option to switch between sims for calls and data, it was available in MIUI... Just a feature request
karthikkh20 said:
Is there a way to make a call from second sim directly from dialler instead of changing the sim settings preference for call and data... Pls add an option to switch between sims for calls and data, it was available in MIUI... Just a feature request
Click to expand...
Click to collapse
Apart from that annoying ask everytime feature
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Evolution X for the Mi 11 Lite 5G [renoir]
Code:
/*
* Your warranty is void. Or vaild, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@peaktogoo (Now RealAkito)
Reach us on Twitter! @EvolutionXROM
What are our features?
- Just flash and check "The Evolver"
In call (on speaker) and the screen turns off, the sound goes off for like 5-7 seconds..common issue
DO NOT FLASH GAPPS, ALREADY INCLUDED
DO NOT FLASH GAPPS, ALREADY INCLUDED
Firmware Download
Light Screenshots / Dark Screenshots
Official Chat
Android OS version: 13.0
Security patch level: January 2023
Build Author: Alps Yogurt
Source Code: https://github.com/Evolution-X
Device Source Code: https://github.com/RobertGarciaa/android_device_xiaomi_renoir
Device Source Code: https://github.com/RobertGarciaa/device_xiaomi_sm8350-common
Kernel Source Code: https://github.com/LineageOS/android_kernel_xiaomi_sm8350
ROM Developer: joeyhuab
-Notice-
Build for personal use.
Mi 11 lite 5g Android 13 custom rom is lacking, so I share the rom I built.
This rom will be uploaded irregularly.
Custom roms will be uploaded only when i want to build with updated source.
I'm busy so I can't see the reply.
I just created a thread to show where custom roms are uploaded.
Active feedback is difficult.
Because Im not rom maintainer and specialist, If you have problems with this ROM, try another ROM.
Flashing Instructions:-
First Time Install / Clean Flash
- Before proceeding any further, make sure you have downloaded all the files required for successful installation i.e., ROM zip (evolution-*.zip), boot.img, vendor_boot.img, dtbo.img. firmware from the download link above.
Recovery is included in boot.img and vendor_boot.img.
1. Reboot to bootloader (fastboot)
2. Connect your phone to PC
3. fastboot flash boot_ab boot.img
4. fastboot flash vendor_boot_ab vendor_boot.img
5. fastboot flash dtbo dtbo.img
6. fastboot reboot recovery
7. Select Wipe data/factory reset & confirm
8. Go back and select Apply update from ADB
9. adb sideload evolution-*.zip(or drag down the rom zip to cmd)
10. adb sideload firmware*.zip (only if there's a firmware update)
11. After installation complete, Reboot system. #KeepEvolving
Update / Dirty Flash
1. Download proper flashable ZIP for your device
2. Reboot to Recovery
3. Select Apply update from ADB
4. adb sideload evolution-*.zip(or drag down the rom zip to cmd)
5. adb sideload firmware*.zip (only if there's a firmware update)
6. Reboot to System and Use #KeepEvolving
Update history(only what's important)
2023/1/25 :
Fix low mic volume on voip like telegram, whatsapp
Fix In call bug
2023/2/7 :
February security patch
Add battery health, Smart pixels, Smart charging
Limit AOD & Ambient Display refresh rate to 60Hz
Improve battery life(Maybe?)
Enabled exfat filesystem support
And so on
2023/2/9 :
Fix Issue(Safetynet randomly failed)..Rom source problem(7.6 -> 7.6.1)
2023/2/13 :
Sync Latest Evo X source(Fixed error showing rooted device)
Sync Tree with Saikiran's tree
2023/2/15 :
Fix Issue that volume is stuck on max when incall speaker mode
Sync Tree with Saikiran's tree
2023/3/9 :
Sync Latest Evo X source
Update WFD, DPM, IMS, and RIL system blobs
Add Perf System blobs
Enabled ufs powersaving
Improved auto brightness overlays
Improved statusbar padding
2023/3/11 :
Hotfix Update
2023/7 :
Pretty smooth ROM only problem i found out is with ExFat SDcard not reading onli trying to format . It is working on Tequilla and Lineage os.
minox4321 said:
Pretty smooth ROM only problem i found out is with ExFat SDcard not reading onli trying to format . It is working on Tequilla and Lineage os.
Click to expand...
Click to collapse
Using a previously backed up kernel, the changes to support exfat were not applied.
The problem is solved by adding the following statement.
It will be reflected in the February update.
arm64: configs: xiaomi: Enable CONFIG_EXFAT_FS · LineageOS/[email protected]
Bug: 186473897 Test: build/build.sh Signed-off-by: Sandeep Patil <[email protected]> Change-Id: I6c97e858e8f1eac0658a46313a71dac73653d63c
github.com
Hello, currently i am using the xiaomi.eu rom which has miui 14 and android 13, but i would like to try this evoX rom. Do i need to flash the miui 13 global rom first or i can just flash this evoX rom? Thank you
Edit: i flashed xiaomi global stock (13.0.9) and then i flashed this rom and it's working perfectly, thank you so much for your hard work <3
The front camera does not work in banking applications. The same thing happens in the other roms.
Only Pixel Experience 13 and ArrowOS worked but they were discontinued
JoaquinDM said:
The front camera does not work in banking applications. The same thing happens in the other roms.
Only Pixel Experience 13 and ArrowOS worked but they were discontinued
Click to expand...
Click to collapse
I think it will be fixed in the next update.
Hello, is there any way to install the xiaomi stock camera with this rom? Gcam night mode is very bad .
97jota said:
Hello, is there any way to install the xiaomi stock camera with this rom? Gcam night mode is very bad .
Click to expand...
Click to collapse
I uploaded the miui camera magisk module to github download page
Sorry,have to ask,OEM unlock is mandatory to flash custom rom on this device(not mentioned abowe)??
@[email protected] said:
Sorry,have to ask,OEM unlock is mandatory to flash custom rom on this device(not mentioned abowe)??
Click to expand...
Click to collapse
Unlocked Bootloader is mandatory to flash anything custom (ROM, kernel, recovery, Magisk/root)
Part of the Google requirements (in place already for years)
fastboot flash ...
is not allowed with the locked BL.
Even if ROM can be installed from TWRP, you still need to install TWRP first time by flashing through Fastboot, hence the BL must be unlocked anyway
There will be an update in March as well.
If you want to know the rom upload news in real time, subscribe to my telegram channel at the link below.
Starting from the Android 14 build notification, a survey of the custom ROM you want to build will also be conducted.
Alps Yogurt's Custom Rom - Channel
This channel notifies you that a new custom rom I built has been uploaded.
t.me
Mates,stuck in fastboot....fastboot reboot recovery doesnt work at all,any help please??
@[email protected] said:
Mates,stuck in fastboot....fastboot reboot recovery doesnt work at all,any help please??
Click to expand...
Click to collapse
I had the same problem once. Flash stock global firmware with mi flash, make sure to flash without locking the bootloader, then flash this rom again.
Hello! This ROM is great and all but it seems that I cannot connect to my TWS earbuds anymore (FIIL T1 PRO), it used to work in MIUI. Any way you can fix it?
edit: Oh! nevermind, it somehow fixed itself
In a situation where a clean installation is required, different ROMs are built according to the results of the survey.
Does this rom have call recording built in?