Tablet has got into bootloop? [Help] - Android Q&A, Help & Troubleshooting

Hello! this is my first thread.
Normally I wouldn't take the trouble to write about a problem of this sort and just search for a similar and resolved one in forums, but this time I couldn't find any.
My tablet is a Polaroid a900x, used mostly for work and social media. It was working incredibly fine before I installed Xposed and an Xposed module along with it over a year ago. Now every time I boot it, it shows the logo and never arrives to the home screen, instead there appears constantly these error messages:
"Unfortunately, Stresstest for 5.0 has stopped.
"Unfortunately, the process com.android.phone has stopped.
"Unfortunately, the process android.process.media has stopped.
Click to expand...
Click to collapse
Even if I click "Ok" on all of them, they keep appearing.
So far I have tried to wipe data/factory reset and wipe cache partition without success.
Could someone help me find a solution or explain to me what happened?
I already took it to a "Technic" which just told me I should better buy a new one, preferably of a "better" brand...
Thanks in advance! (and I hope this is the right forum)

Say94 said:
Hello! this is my first thread.
Normally I wouldn't take the trouble to write about a problem of this sort and just search for a similar and resolved one in forums, but this time I couldn't find any.
My tablet is a Polaroid a900x, used mostly for work and social media. It was working incredibly fine before I installed Xposed and an Xposed module along with it over a year ago. Now every time I boot it, it shows the logo and never arrives to the home screen, instead there appears constantly these error messages:
Even if I click "Ok" on all of them, they keep appearing.
So far I have tried to wipe data/factory reset and wipe cache partition without success.
Could someone help me find a solution or explain to me what happened?
I already took it to a "Technic" which just told me I should better buy a new one, preferably of a "better" brand...
Thanks in advance! (and I hope this is the right forum)
Click to expand...
Click to collapse
Hi what is you model name and build number from the back cover?

Teddy Lo said:
Hi what is you model name and build number from the back cover?
Click to expand...
Click to collapse
Hello! the model is A900 and BN (which I think is Build Number) is: 01.01.008.091.01

Say94 said:
Hello! the model is A900 and BN (which I think is Build Number) is: 01.01.008.091.01
Click to expand...
Click to collapse
Sorry for late respond , I can't find any of rom for your device , so try to contact support to provide you stock firmware for your device.
https://polaroid.com/support
Good Luck

Related

[Q] Cant do reboot now in recovery mode,gets Error icon

Hello there,
I got a new S3 I9300 from ebay and the device status is :modified, Trying Software update gives: "your device has been modified. Software updates are not available".
No modifications made from my side and the seller informed that this is unlocked i re-checked with seller today. Look's like there is a known problem, i see many other users reporting this problem. I tried all the solutions provided in all the forums that google has presented with but none of them worked.
2nd, I'm tried to do Cache wipe it gave the message the wipe complete but when i select reboot now, phone displays error icon. See link:
h10025.www1.hp.com/ewfrf-JAVA/Doc/images/910/c03735020.jpg
I tried Hard reset, i get the successful message and when i do reboot now, same error icon again and it goes no where from there, i have to hold pressing the power button to restart the phone.
I see this is a china version (CHN) and as well all S planner content etc are in chinese, i'm not able to change it as i know.
Any information on what could be the problem leading to error icon and Any solution to my actual problem ?
Would really appreciate your help,i have already spent 12-15hrs trying to find a solution.
Can u check if the phone is a fake anot?
Sent from my GT-I9300
bluzeee said:
Hello there,
I got a new S3 I9300 from ebay and the device status is :modified, Trying Software update gives: "your device has been modified. Software updates are not available".
No modifications made from my side and the seller informed that this is unlocked i re-checked with seller today. Look's like there is a known problem, i see many other users reporting this problem. I tried all the solutions provided in all the forums that google has presented with but none of them worked.
2nd, I'm tried to do Cache wipe it gave the message the wipe complete but when i select reboot now, phone displays error icon. See link:
h10025.www1.hp.com/ewfrf-JAVA/Doc/images/910/c03735020.jpg
I tried Hard reset, i get the successful message and when i do reboot now, same error icon again and it goes no where from there, i have to hold pressing the power button to restart the phone.
I see this is a china version (CHN) and as well all S planner content etc are in chinese, i'm not able to change it as i know.
Any information on what could be the problem leading to error icon and Any solution to my actual problem ?
Would really appreciate your help,i have already spent 12-15hrs trying to find a solution.
Click to expand...
Click to collapse
what does it say under product name in download mode(volume down+home+power)?
Thanks a lot for taking time and responding to my query.
I have sent the phone back instead of spending anymore time on it. What i see is the firmware installed is of Chinese. I'm not sure how does that affect the apps language though.
Waiting for a new one now.

[Q] Camera Failed - Error when trying to check camera firmware

Hi, i have a Galaxy S3 GT-19300 with a faulty camera. "Camera failed" error when i try to access it.
When i try to check the Camera Firmware via *#34971539#, i get a black screen with a grey bar at the top which says "Camerafirmware standard" , below this there no information whatsoever. After a second or two i receive a message stating "Unfortunately, factory test has stopped". The phone has never been rooted and the problem existed prior to updating to 4.3.
I've tried the following.
Clear Camera Cache
Clear partition Cache and restore phone - have restored a number of times
Reseated ribbon connector for camera
Cleared files in \Phone\Android\data\com.sec.android.gallery3d\cache (I've read this can help)
At this stage i'm not sure what to do. Does anyone know why there might not be any information displayed when trying to check the Cameras firmware? Any help would be greatly appeciated.
Baseband:I9300XXUGMK6
Build JSS15J.I9300XXUGMK6
Running Android Version 4.3
Do a full wipe and flash the latest stock firmware with odin. If still the same then it's a hardware fault.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Do a full wipe and flash the latest stock firmware with odin. If still the same then it's a hardware fault.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Will give this a go. Thank you
No luck unfortunately, flashed successfully however the problem remains. Both front and rear cam fail in diagnostic menu so im guessing this is a motherboard fault as all other areas have been ruled out.
Same probelem
Braxley1 said:
Hi, i have a Galaxy S3 GT-19300 with a faulty camera. "Camera failed" error when i try to access it.
When i try to check the Camera Firmware via *#34971539#, i get a black screen with a grey bar at the top which says "Camerafirmware standard" , below this there no information whatsoever. After a second or two i receive a message stating "Unfortunately, factory test has stopped". The phone has never been rooted and the problem existed prior to updating to 4.3.
I've tried the following.
Clear Camera Cache
Clear partition Cache and restore phone - have restored a number of times
Reseated ribbon connector for camera
Cleared files in \Phone\Android\data\com.sec.android.gallery3d\cache (I've read this can help)
At this stage i'm not sure what to do. Does anyone know why there might not be any information displayed when trying to check the Cameras firmware? Any help would be greatly appeciated.
Baseband:I9300XXUGMK6
Build JSS15J.I9300XXUGMK6
Running Android Version 4.3
Click to expand...
Click to collapse
I have the same problem I would be happy if someone can make it work.
:/
GrazoR21 said:
I have the same problem I would be happy if someone can make it work.
:/
Click to expand...
Click to collapse
If you have the same problem then read the op it is most likely a motherboard fault (physical fault not software) it will need to go to be repaired:silly:

No Solutions have workd yet: unfortunately the process com.android.phone has stopped

I hope this is the best place to post this. If not, I am very sorry. I have found a few posts with same message BUT all of them I found were when this happens after installing a rom or updating, etc...
I have a Virgin s2. I just have original stock rom, Ive done nothing at all to it. I changed out my batteries, turned it on, then after it got loaded I got a popup saying "unfortunately the process com.android.phone has stopped"! I restarted then as soon as i tried to do something, i received it again. I restarted again & didnt get message til I had opened google & was waiting for search results to come up when I got message saying something about couldnt find a mobile network (or something like that), then got the "unfortunately the process....." popup. It started popping up over & over, including when I got a phone call (which made it impossible to answer, however I was able to call them back okay). I have already tried:
taking out the sdcard;
booting into recovery then wiping the cache partition;
booting into safe mode.
The popup &problem still continued. Oddly, after my husband ran "CM Security" though it found no problems, it was a little bit before it did it again and even now it doesnt popup quite as often as it had been but it still is enough to probably make the day at work very aggravating lol.
Please say theres still some hope! I'm not able to buy another phone right now. I am capable of doing anything possible to save it if you just tell me what would be best to do. I saw somewhere when I searched Google say that installing a custom recovery would probably fix it. If so, please point me to where I can find all the necessary things &instructions I need. Or if it would be better to do a factory reset, please tell me how to do it on this phone (or if I just need to go to recovery & simply do it).
ALSO I do have an identical s2 except it is Sprint & I havent came across a detailed guide for flashing the s2 from Sprint to Virgin that doesnt require the newest paid version of cdma workship, which i cannot currently afford.
Thank you for your time & assistance.
FIXED (at least so far)!
SOLVED!!! (I hope:fingers-crossed
Went ahead & just backed up contacts to sd card, then did a Reset through Recovery. So far no "Unfortunately the process com.android.phone has stopped" message. :highfive:
gdownloads said:
SOLVED!!! (I hope:fingers-crossed
Went ahead & just backed up contacts to sd card, then did a Reset through Recovery. So far no "Unfortunately the process com.android.phone has stopped" message. :highfive:
Click to expand...
Click to collapse
Great to hear you fixed (or partially fixed) your problem. The problem with updating stock roms using OTA or kies is that sometimes a factory reset or clearing the cache is required to remove some left over apps or unneeded files that might potentially make your phone give errors (like the ones you were experiencing). It is highly unlikely it is a software issue, unless it was a dodgy download, moreover unfinished file deletion or unneeded files would have caused this to happen.

System UI stopped

Hi all
Since a few days I get a error " System UI stopped "
Searching on Google only gave me that most common error but not this one. It prompt 1 time a day / 2 days and I don't know how to solve it. It tried clearing the system case but this didn't work.
The error mostly appears when waking up my phone and never when working on it.
I don't use custom lockscreen or launchers and running DarkLord N5 rom since months now but this happens since the last week or so.
I attached a screen of the notification.
Hopefully someone knows the solution
THX in advance
iDreamliner said:
Hi all
Since a few days I get a error " System UI stopped "
Searching on Google only gave me that most common error but not this one. It prompt 1 time a day / 2 days and I don't know how to solve it. It tried clearing the system case but this didn't work.
The error mostly appears when waking up my phone and never when working on it.
I don't use custom lockscreen or launchers and running DarkLord N5 rom since months now but this happens since the last week or so.
I attached a screen of the notification.
Hopefully someone knows the solution
THX in advance
Click to expand...
Click to collapse
Boot into recovery, wipe davlik/cache, reboot to system, checck to see if problem is solved.
Without the proper logs and troubleshooting you are gonna be out of luck.
zelendel said:
Without the proper logs and troubleshooting you are gonna be out of luck.
Click to expand...
Click to collapse
Is there some way to log it for when it happen you could see what causes it?
iDreamliner said:
Is there some way to log it for when it happen you could see what causes it?
Click to expand...
Click to collapse
Yes. It's troubleshooting/android 101. It's called a logcat. You might want to spend a few days doing research.

Needing new firmware for Southern Telecom SmartTab Tablet...

Ive got an android tablet that is having trouble after rooting with kingroot.
Worked fine for a while after rooting, main reason I rooted was to remove the bloatware installed (full of disney apps etc)
After removing the apps, then i started having trouble after reboot, and the following message keeps appearing and wont go away.
"unfortunatley, the process com.android.systemui has stopped"
Hopefully im asking in the right area here, but im hoping i can find a decent firmware with the bloatware removed , and hope that flashing will fix this once and for all at the same time.
What complicates this is that this model is for the New Zealand market and i think they are renaming another model number for New Zealand.
If another firmware is available that i can flash onto this tablet, it would be great thanks
Specs:
Its produced by southernTelecom
Model: ST10NZ
Android 4.42
firmware 2.01
kernel version 3.4.67
build number
ST10_20141217
BN: (another build number) 01.04.006.074.07
bump
Here is a link to the product.
https://www.pbtech.co.nz/index.php?...ab-ST10-10-Android-Tablet-for-Kid--Work---Qua
Bumping.
Anyone able to help find a ROM?
bump
If it's any help, I'm having the same problem, still unable to find a solution, mines the ST13, but have the same problem with "com.android.systemui" - Be keen if you find a solution, I'm happy to restore the original ROM (or custom) but unable to find either as yet.
Here's hoping...
net nanny
waynez2016 said:
If it's any help, I'm having the same problem, still unable to find a solution, mines the ST13, but have the same problem with "com.android.systemui" - Be keen if you find a solution, I'm happy to restore the original ROM (or custom) but unable to find either as yet.
Here's hoping...
Click to expand...
Click to collapse
net nanny is hardcoded and dont remove netlauncher 3 . if you deleted it, it breaks the android.ui and there is no recovery image.
If anyone can come up with a ROM image, that would be great.
I also have been told here to try downloading net nanny off google play.
Apparently that works.
waynez2016 said:
If it's any help, I'm having the same problem, still unable to find a solution, mines the ST13, but have the same problem with "com.android.systemui" - Be keen if you find a solution, I'm happy to restore the original ROM (or custom) but unable to find either as yet.
Here's hoping...
Click to expand...
Click to collapse
Im looking for the stock ST13 firmware & ROM any chance you can upload i have three I've burned through and my backup got tainted?
XxKodedxX said:
Im looking for the stock ST13 firmware & ROM any chance you can upload i have three I've burned through and my backup got tainted?
Click to expand...
Click to collapse
If a ROM could be found it would be great.
I got mine working again after reinstalling the netnanny app from the play store, fixed it. But it still does not run flash.
Net nanny
re downloading net nanny from the play store does work, at least to get it working again. I had a problem that after that message popped up a few times (com.android.systemui failed to load) or whatever, I couldnt click on anything. AFTER I factory reset the tablet, that problem stopped. The message kept popping up, but I was able to click "OK" and type a few letters on the setup page lol. I got into the play store, found net nanny, downloaded it, and SHAZAM! Its working again. i JUST WANT TO PLAY MY GAMES LOL. THANKS TO WHOEVER FOUND THIS OUT! I hope this helps the next person that un-installs net nanny lol. BTW, I contacted southern telecom and said I got a virus or whatever and requested a website to download the firmware, so if they give me that information, I will share it with you all
Any news on that link for the firmware
Playing with a ST13 now, the os disappeared and tablet is stuck at bootloader, unable to do anything at this point. Windows does not recognize tablet and now I am out of options.
Anyone have any ideas thoughts?

Categories

Resources