Hi,
I have been using my Nexus 7 (2012) in my car as a satnav and for listening to music by plugging it into the radio usb input. It played music fine using Google play but it's a bit slow now for the satnav bit so I bought an M5 tablet.
Satnav app works ok but getting the music to play is not so good.
With the Nexus I would connect it to the radio with a usb cable, switch on the radio, select usb, open Google play, select the album, select play and off it went....easy. Not the same with the M5, after opening google play I'm asked to select connection mode, charging, MIDI, transfer files, transfer photos. If I select any option other than charging it reverts after a couple of seconds to charging and occasionally plays the music after about 20 seconds (missing this part of the album). If I pause or stop then it'll occasionally stop or just continue.
If the Nexus can do all this well then surely the M5 can, am I doing something wrong.
Any suggestions much appreciated.
Cheers
Ron
Is your screen on when music cuts out?
Not sure about USB - but via bluetooth, EMUI devices have issues with background music playback. Your screen needs to be on and your music player needs to be in the foreground. Otherwise, EMUI situationally (I think it depends on the msuic player app and available RAM and other things) kills bluetooth/media processes in the name of battery optimization. Music playback behavior becomes as you describe. It's usually fixed temporarily by toggling bluetooth on and off a couple times, or it's fixed permanently by freezing the Power Genius app (with root).
That's not necessarily your problem - but just saying...
Thanks,
I've been through all the settings (I think) but no change, it's pretty rubbish really that a 6 year old tablet outperforms the M5 on a feature that you would imagine should get better integrated into a more modern device. The M5 may have some good features but there are some aspects that are difficult to live with and ultimately i'll probably return it.
Cheers
Ron
I think it's the Android version that is ``causing`` this, not the Mediapad M5
Hi,
Thanks, that's interesting, do I understand that you think that it's a feature (or glitch) in Android 8 and therefore all devices (all makes) running this version will be experiencing the same? It would be hard to believe that this version would be released without testing to see whether such a common use for these devices would work as they have for many years!
I'm really looking for a fix/work around.
Cheers
Ron
Related
So, I just got this and I really want to like it, but I'm having issues.
[Constant]Playing music the background constantly cuts out when you do anything else in the foreground. Both Google Music and Amazon do it. I'm streaming, but I can see that the song has been downloaded. This is my number 1 issue.
[Intermittent]Sometimes the touches don't register on the screen. It's like there is a dead spot. I can touch elsewhere and back and it works fine again. Tried screen recalibration, same issue.
[Intermittent]The GPS doesn't shut off after apps get location. Eventually this kill the battery, but I can just turn it off.
[Random]Micro freezes like I have never seen on any android device. It's like the whole thing freezes. I'm not sure if this is related to the CPU firing up the other core (may be issue with #1)
I am lucky not to have the screen issue, and I'm familiar with the input lag issue (Transformer has it too). There is a lot to like about this tablet, but the music thing a deal breaker. Do I have a lemon, or is this normal?
Things I love:
2 USB Host Ports!
4x3 screen for browsing (not so great for some games and video)
FAST Harware acceleration
Remote is nice to use a player (I bought these. http://www.staples.com/Cyber-Acoustics-Portable-Speakers/product_860830 Needed a small adapter to access the USB port, but it works awesome!)
Sharp screen
More to come
Netflix issue
After Archos fixed the Sleep of Death issue, my ONLY issue is that sometimes when watching Netflix for awhile, the tablet crashes and reboots. Doesn't seem to do that doing anything else, including watching movies off the internal drive.
Thanks for the info.
I did a fully recovery and it's better. I played with the browser for about 5 minutes and only had one minor hickup with the built in player running in the background. Also, the browser was smoother.
I was messing around with Google Music and it hiccuped several times while scrolling around the song list, but nothing like it did this morning. I got another dead spot too. Tap away, tap back and it worked again. Weird stuff.
I picked it up cheap and I really like it, but if it reverts to the former issues, I have to send it back or try to warranty it.
---------------------------------------------------
Update
I reinstalled a bunch of stuff and it's happening again. It's not as bad as it was, but it may be due to that I haven't installed as much. It may be related to memory, because it seems worse when more is running. I sent an e-mail to Archos. Let's see what they say.
I have problems when using the wifi as well...
I have minidlna Debian server at home and all the movies that i watch over wifi have problems. If i copy them via ftp to the tablet there is no problem at all... they play perfect even most demanding HD ones (fullhd 1080p)
One problem that was most frequent was that if i put my Tp-Link 740 (150mbps LiteN) router in 802.11n mode the wifi drops often and reboots my router. In 54mbps G-only mode the link is more stable, the router does not reboot and the link does not drop, but the video streaming across wifi is bad. Ftp transfers work very good (3~3,5 MB/s with AndFtp).
The router works perfect in N-mode with my laptop and SGS II, even FullHD streaming to phone, no problem.
I have a US SGS3, not-rooted - AT&T released an OS update yesterday, and now MirrorLink / DriveLink is functional.
Using the Sony XAV-601BT, firmware updated from UK Sony website, Samsung Drivelink APK installed via USB, from the other MirrorLink thread.
When I plug the unit into USB before I would get a message "USB device not recognized", and would then stream Pandora via Bluetooth. Now it auto-launches DriveLink, Navi works, phone works, music works, but only supports Mp3, etc. files at the moment.
Frankly, I was hoping for more app support (eg ability to launch Pandora, Waze, etc.) - right now it only works with built in Google Maps Navi, Phone book, and local files for Music. Something which is annoying, is that I cannot use Bluetooth audio streaming for Pandora at the same time as DriveLink, so the solution is imperfect - I can now use DriveLink navigation, but not Pandora, Or I can exit fully out of drivelink, and listen to Pandora; music or nav, not both - so while it now launches and works, I still cannot use it regularly.
As a bit of an aside, when I first bought my SGS3 I installed an AppRadio2, which was horrible and got exchanged for the XAV-601BT. Now, however, within the last week, there's been progress on fully unlocking control of android using the AppRadio2:
Youtube link "PFiAWrItAdE" (can't post URL)
Seems like the ultimate solution, away from the nanny limitations of DriveLink, although one would imagine, since these limitations are with Samsung's software, a 3rd party app could provide a similar experience with the MirrorLink standard. So perhaps be patient for 6 months, or switch back to AppRadio2, and hope the laggy connection issues have been fixed.
scorp, welcome to XDA!
Many of us feel the same about Samsungs app - pretty poor effort so far Please check out the last few pages of this thread - http://forum.xda-developers.com/showthread.php?t=1837847&page=15 (from about page 12 onwards)
A growing number of members here are trying to build a donation 'bounty' in the hope that we can get a developer interested in playing with the Samsung Mirrorlink app and removing the current restrictions to allow full mirroring of the whole phone (meaning all apps on the headunit).
The more support we get the more chance of making this a reality, if you'd be willing to donate something to see this happen please make a post in that thread (also stating your phone model and ROM/firmware) and I'll add you to the list.
Thanks,
Olywa
If any members have any interest at all in mirrolink/drivelink (mirroring phone display and control on supported car headunits) please do take a look at the thread: http://forum.xda-developers.com/showthread.php?t=1837847&page=15
Hi all,
I've been playing with the airplay apps over the last week or so but am hitting some problems.
I have a couple of old android phones setup around my house which have speakers connected to them. I run Bubbleupnp on each of those devices which then effectively sets them up as DLNA libraries and renderers. I have two other devices setup - an android tablet and a QNAP NAS. My QNAP NAS supports DLNA and this is where my music library is stored. The android tablet is used as a controller, again running Bubbleupnp, where I can choose the NAS as the library and either of the android devices as speakers. This works great.
One problem is that with Bubbleupnp, it is only possible to select one renderer which means it is not possible to stream to multiple speakers at the same time. E.g. I want to stream to my kitchen and my living room at the same time with the music completely in sync. Another problem is that when using Bubbleupnp, music sent to the renderer must be from a library and cannot be live streaming on the controller device (E.g. Spotify, Youtube etc.).
I then found AirAudio which actually fixed both of the issue (Sort of). Firstly, when running AirAudio on a rooted device, you can push any sounds from the controller device to any of the DLNA renderers (E.g. Spotify). Secondly, it is possible to stream to multiple DLNA renderers at the same time (Obviously, Bubbleupnp still needs to be running on these devices to make them DLNA devices). The only problem here is that when sending to multiple renderers at the same time, they are not in sync. The is due to the actual streaming being performed on the individual devices and therefore they all perform differently.
I emailed the AirAudio development team and they were extremely helpful in explaining the details of this to me and even recommended some other apps to try which might help. The apps which they recommended were Android HiFi and AirBubble where it is possible to set different delays for the different renderers. I am yet to actually try this as I imagine that the delay is not exactly the same each time I try and play music and therefore the delay will need to be altered regularly (Bit of pain).
This whole problem is a limitation of DLNA - you cannot synchronise multiple devices. Apparently you can synchronise multiple AirPlay devices?
So, after all of that, my question is, 'Is it possible to turn an Android device into a AirPlay device?' The developers at AirAudio seemed to think that audio synchronisation of AirPlay receivers for Android is not supported, if this is true, does anyone know why? Seems mad that something as powerful as an Android phone can't be an AirPlay device.
Thanks in advance,
Regards,
Dan
Sorry to bump this but just hoping that someone reads this who can help.
Dan
Last try...
Anyone got any ideas here?
Effectively I want Boombotix Sync for Android (This is for iphone only). There's also Speakerfy but it's limited to music library on the host and it's ui is horrible.
can't believe there's still no solution to this. .
I can't believe that no one out there isn't trying to do the same as me!
I still can't find a suitable solution. Please please help.
Hi all,
I have a Klyde head unit for my Honda Civic, This one.
- I am running Malaysk's latest ROM from 12 Feb.
-I use CarHomeUltra as my launcher by allowing it to take over the home button (only the software button though, it will not take over the physical home button).
-I have Google Play Music set up as my preferred media player in all places I could find (Carhomeultra, headunit app, the xposed modules) and I have it setup so that it starts playing music right away by using Automagic which is an app like Tasker.
-This whole setup starts once my phone's bluetooth pairs with the head unit, at that time my phone starts a wifi hot spot and the head unit connects to it and does its thing. It all works, but it takes what seems like forever to actually start playing music. This has worked great on earlier setups that I had so I don't know if I have mucked everything up with conflicting settings in the xposed modules or not.
-It is about 30 sec to actually load up android (has been that way since a very early MCU that I was on where android loaded in like 18 sec!), this part I have come to accept. But it takes up to 3 minutes for all my steps to kick in and actually start playing the music.
-I have messed with the PCV startup app, added Google Play Music, automagic, bluetooth, carhomeultra, and anything else I could think of to speed it up. Now when android loads up, I am right at the google play music screen, so that seems to be working.
Do you guys have an efficient setup or know of the best way for me to get this working as optimal as possible? I love how we have a dedicated forum now but still find it difficult to find exactly what you are looking for.
Apologies for perhaps using the wrong forum, I have to wait to create this thread in either the "general" or "Q&A" forum.
Contact the author of this program will help you do, the download will be 20-30 seconds. http://forum.xda-developers.com/showthread.php?t=3246437
Hey everyone...so I have a very difficult question and was hoping that someone here can help. I tried another forum but - not a peep.....and I am hoping since you guys here are developers you might be able to put on your propeller hat and figure this out!!!
I have the Ascend Mate 2 (which I really enjoy ) and decided to upgrade from I think it was 4.3 to Andriod 5.1 via the Huawei website. All went perfectly normal, and still is normal - except for one thing.
It won't stream or mirror to my television.
So here is a little background. It is the unlocked Ascend Mate 2, Andriod 5.1 EMUI 3.1, build MT2-L03c00B322. 2.0 GB RAM.
When it was 4.3, I streamed perfectly to the television using RK Anycast, ROKU and FireStick TV. Just set it up like normal, clicked on the display, it connected to the device I wanted to use and - off into movie-land I went (I have unlimited streaming data).
So I wanted to upgrade my phone so I could use various other apps that needed a higher version.
Did the normal upgrade via Huawei website and took just a couple minutes, no issues and all loaded all running like usual. So now here it is a few days later, and I am finally nearly done installing all my normal apps and backed-up/restored texts and calls etc. So I thought, let me stream a movie (I use the term streaming and mirroring to mean the same thing) from my phone to my TV so I can relax.
I do the normal, pull down from the top, and bring up the "multi-screen" option. And I see the RK Anycast device listed, I hit connect, it does connect, I see my cellphone mirrored on the TV like normal, I go to any app - Netflix, YouTube, Prime etc., that loads like normal....but when I hit play....it plays for about three seconds, then just totally hangs. Stops playing, the picture just stays on the TV screen without moving at all. So i have to close the program.
So I test this out with my Firestick and my Roku, does the same exact thing for them. Looks normal, connects like normal, I go to hit play it runs for about two seconds then just totally stalls and hangs.
I have no idea what the problem is...but seems almost like....maybe there is a certain setting for Andriod 5.1 that needs to be changed that I am not aware of?
Like I said I am just puzzled since I know it worked perfectly when I had Andriod 4.3 on it.
And get this - a saved video I physically on my cellphone - well that streams to the TV without hanging or lagging, it runs like normal.
Thanks for any ideas and hints....!!!