Hello,
I had my device running slow from the moment I opened it the first time.
I know I should have take it to the warranty, but I needed the time all day.
I dropped it so I couldn't take it there anymore.
Now, since the warranty is void, I wanted to change the 5.0.2 lollipop, hoping for a normal response time from it.
I tried installing TWRP and I didn't suceed. It got stuck on the Lenovo logo.
I managed to put back a recovery from another ROM (lenovo) and used QcomDLoader.exe to flash another rom. A stock version of A6010 but of 16GB ROM not 8 like mine.
It didn't work, even if I waited more than 500 seconds (more than 5 minutes). Now, it's in black screen, won't come out of it.
I managed to find some errors with another qualcomm flash applications:
Code:
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Click to expand...
Click to collapse
I hope someone has an idea that could help me out. I'm trying non-stop for 10 hours now. My head really hurts, I didn't just post this here without trying to solve it myself first.
Thank you in advance for your help!
Andrei
UPDATE:
Okay, so I managed to install a 8GB A6000 firmware, but the GSM network is not working. It shows 2 sims of 2G and none is working.
I have the open source files of my original firmware on lenovo's site.
How could I replace the entire OS, so masically copy/paste the files from computer onto the phone? Or ..can I make a flash version from those files?
Thank you!
Andrei
Question: My 5x will only show in QC download mode as 9008. I have this same error for my LGH791 with the error you show above for Sahara fail. How did you overcome this? Was it the flash programmer, did you determine the cause?
Hi guys, sorry I'm newbie so after a long time surfing for solutions, I couldn't solve my own problem. That's why I come here to ask for your supports
Firstly I unlocked bootloader, installed TWRP and rooted my device and enjoyed it. But after decided to wipe (factory reset) this phone with TWRP, and my problem began...
1. I got stuck in TWRP loop booting. After that I tried to fastboot system.bin, cache.bin and recovery.bin from Stock Firmware but it still hung at Nokia logo booting
2. I still kept trying with SP Flash Tool, Miracle Box but there was still no hope:
- SP Flashtool v5_1548 gave me error: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
- Miracle Box 2.27A told me there was an error (i don't remember the code) occured in the location (i can't remember its code either)...
Anyone can solve it please help!!!! I love this phone much and as of now still suffering day by day since I can't do anything with it.
Kindly appreciate any suggestion and solution.
Thank you all!
Can you provide me the stock rom link please?
@you download firmware . Youtube : type "nokia ta 1066 flashing" GSM TEAM
@you flash this firmware , tick only recovery.bin
@notes : hold volume up & volume down -----> NO error: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
good luck ^_^_^//
@i'm using Nokia 1 Red TA-1047
Hello,
After try to flash the recovery on my device, the device stay lock on secure boot.
I have probably missing a step for the secure boot, well.
Archos send me the firmware and windows driver and DA file, i can link the files if you want.
But after many test with many version of SP flashtools I have always an error
On linux : STATUS_DA_HASH_MISMATCH (-1073283068) , MSP ERROR CODE : 0x00.
Can Help me ?
Thanks
buzz-27 said:
Hello,
After try to flash the recovery on my device, the device stay lock on secure boot.
I have probably missing a step for the secure boot, well.
Archos send me the firmware and windows driver and DA file, i can link the files if you want.
But after many test with many version of SP flashtools I have always an error
On linux : STATUS_DA_HASH_MISMATCH (-1073283068) , MSP ERROR CODE : 0x00.
Can Help me ?
Thanks
Click to expand...
Click to collapse
Finally the solution it was in the good files versions, I used this one :
- OS : WIN10
- Tools: SP Flash tool V5.1744
- Driver : MTK V1.0.8 and install DRIVER AUTO 1612
- FIRMWARE : ac70-20180912-1740-New
Hello buzz-27, it would be great, if you could tell me, where you can download the Firmware - same problem here Thank you!!!
buzz-27 said:
Hello,
After try to flash the recovery on my device, the device stay lock on secure boot.
I have probably missing a step for the secure boot, well.
Archos send me the firmware and windows driver and DA file, i can link the files if you want.
But after many test with many version of SP flashtools I have always an error
On linux : STATUS_DA_HASH_MISMATCH (-1073283068) , MSP ERROR CODE : 0x00.
Can Help me ?
Thanks
Click to expand...
Click to collapse
Hi,
I have recently bricked my AC70HELLO and tried uncessefully to flash stock firmware (from firmwarefile.com/archos-hello-7 ) but always got STATUS_DA_HASH_MISMATCH (with SP Flash Tools V5.1924 and V5.2020) or STATUS_BROM_CMD_SEND_DA_FAIL (with SP Flash Tools V5.1744) errors (with MTK_AllInOne_DA or DA_PL defaults DA).
Could you please share the Download Agent and the stock firmware from Archos ?
I have asked Archos for it in vain, they respond me "Sorry we don't have any FW available for this device. Thanks for your understanding," which got me a bit mad... I mean if my device's constructor doesn't have its stock firmware then who does ?
Here's the "latest" fimware from Archos http://update.archos.com/AFMv2/downloads/ac70hello_archos/20181101.075911/update.zip
Does anybody happen to have a reliable guides and reliable downloads to flash other firmwares to this Hello 7?
I tried several guides but somehow they are inconsistent, incomplete or simply not working. Some say I need TWRP without a link to a working image, others say I could use fastboot which generates "not allowed in locked state". I found out myself that I could work around that error by running "fastboot oem unlock" but after flashing, my Hello keeps hanging in a boot loop. (also after "fastboot oem lock")
Fortunately with @fraenK 's link, I could revert back to stock.
I have been using the Pixel Experience 10 GSI ROM from Expressluke so far. Other GSI ROMs should work as well. https://forum.xda-developers.com/t/gsi-expressluke-built-gsis.4003457/
fraenK said:
Here's the "latest" fimware from Archos http://update.archos.com/AFMv2/downloads/ac70hello_archos/20181101.075911/update.zip
Click to expand...
Click to collapse
Thanks but this is unusable without a working recovery wich I don't have since I'm bricked (corrupted logo.img so crash before booting in anything) would you know where I could find the download agent to use with sp flash tools ?
Archatos said:
Does anybody happen to have a reliable guides and reliable downloads to flash other firmwares to this Hello 7?
I tried several guides but somehow they are inconsistent, incomplete or simply not working. Some say I need TWRP without a link to a working image, others say I could use fastboot which generates "not allowed in locked state". I found out myself that I could work around that error by running "fastboot oem unlock" but after flashing, my Hello keeps hanging in a boot loop. (also after "fastboot oem lock")
Fortunately with @fraenK 's link, I could revert back to stock.
Click to expand...
Click to collapse
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/ -> how to install a GSI (with fastboot or TWRP)
https://forum.xda-developers.com/t/aosp-10-0-2019-12-06-quack-phh-treble.3992559/ -> AOSP with or without gapps and stock GSI rom (if I recall correctly before bricking, the Hello 7 needs an arm64 A-only image)
Hello,
If I can help you, I create a zip file with Driver, Firmware and the compatible SP_Flash for this firmware.
I flashed my Hello with success and I don't sure of all step, cause many test before sucess.
Just put WIN10 in "Test Mode" can help
http://dl.free.fr/getfile.pl?file=/Zn8HQVpO
press "Valider et télécharger le fichier"
Now I am in GSI Android and the Hello work perfectly !
I got same problem with Archos hello 10 version where can i find stock rom for this device? @fraenK @buzz-27 maybe you know?
urkelz said:
I got same problem with Archos hello 10 version where can i find stock rom for this device? @fraenK @buzz-27 maybe you know?
Click to expand...
Click to collapse
http://update.archos.com/AFMv2/downloads/ac101hello_archos/20181114.085412/update.zip
Thanks alot @fraenK downloading now. Anyone got a DA file I can use? Probably will get DA hash mismatch.
Hi everyone,
I bricked my Archos Hello 7 by trying to flash TWRP.
I'm looking to flash my device but it's hard to find informations for this device and nothing works for me.
I tried with SP Flash tool V5.1744 and few drivers versions without results.
I always have STATUS_DA_HASH_MISMATCH or BROM_CMD_SEND_DA_FAIL.
Every time I plug my device, the detected USB is the "Mediatek PreLoader USB VCom", do you think it's the good driver ?
@buzz-27 can you (or someone else) upload your file again, the link on Free is dead.
@Dawnowl444 did you solve your flashing problem ?
Thanks guys.
CameleonTH said:
Hi everyone,
I bricked my Archos Hello 7 by trying to flash TWRP.
I'm looking to flash my device but it's hard to find informations for this device and nothing works for me.
I tried with SP Flash tool V5.1744 and few drivers versions without results.
I always have STATUS_DA_HASH_MISMATCH or BROM_CMD_SEND_DA_FAIL.
Every time I plug my device, the detected USB is the "Mediatek PreLoader USB VCom", do you think it's the good driver ?
@buzz-27 can you (or someone else) upload your file again, the link on Free is dead.
@Dawnowl444 did you solve your flashing problem ?
Thanks guys.
Click to expand...
Click to collapse
Hi,
My AC70HELLO is still bricked unfortunately. I've got a corrupted logo.bin and no way to flash stock rom except with SP Flash Tool. But I can't get passed STATUS_DA_HASH_MISMATCH error.
I tried this utility without much success...
GitHub - MTK-bypass/bypass_utility
Contribute to MTK-bypass/bypass_utility development by creating an account on GitHub.
github.com
It's now easy to bypass MediaTek's SP Flash Tool authentication
A group of developers has created a Python utility to bypass the authentication routine of MediaTek SP Flash Tool. Check it out now!
www.xda-developers.com
With --force I still get STATUS_DA_HASH_MISMATCH and the utility says "Device secure boot: False ; Device serial link authorization: False ; Device download agent authorization: False" wich is weird...
Let me know if you got any more luck with that than me.
If your AC70HELLO is'nt really bricked you can try to flash back stock recovery via fastboot.
Hi Dawnowl444,
Thanks for your tips, I gonna try with bypass_utility but without hope .
Maybe we need to do some hardware tweak to allow to flash the device.
There is here a French tutorial to disassemble the Hello 7. http://rnc.free.fr/hello7/hello7.html
In the firmware I found online, the file Checksum.ini refers to the version 1708 of SP Flash Tool, I tried with itn but without success, maybe it can be successful for you.
Unfortunately, I can't boot into recovery mode, that's why I try to flash with the Flash Tool.
If I succeeded to flash my device I will let you known.
buzz-27 said:
Hello,
If I can help you, I create a zip file with Driver, Firmware and the compatible SP_Flash for this firmware.
I flashed my Hello with success and I don't sure of all step, cause many test before sucess.
Just put WIN10 in "Test Mode" can help
http://dl.free.fr/getfile.pl?file=/Zn8HQVpO
press "Valider et télécharger le fichier"
Now I am in GSI Android and the Hello work perfectly !
Click to expand...
Click to collapse
Hello @buzz-27 , could you upload the file again?
I was try update my Hello 7 and now it restarting continuously.
Hello, is not possible immediately but I try to push the file in a few weeks or before maybe.
Ok thanks. By mistake I'm flashed the Hello 10 ROM in my Hello 7, and now it restarting continuously. I can enter in fastboot but I cannot flash the ROM - error: FAILED (Remote: not allowed in locket state) Do you know another way to flash the correct firmware? I can not enter in recovery mode.
Hello guys for Hello device
Link below with SP tool, Driver and Firmware for Hello 7 this pack work on my Hello 7.
Upload files for free - Restore_Archos_AC70Hello.zip - ufile.io
Download Restore_Archos_AC70Hello.zip for free from ufile.io instantly, no signup required and no popup ads
ufile.io
enjoy !
Thanks buzz-27, unfortunately, it didn't work for me.
Can you tell us which DA did you use ? I have tried all DA from the SP Flash tool with no results.
Maybe we have a different model/revision, mine has the FCC ID : SOVAC70HELLO
Hi guys, I did something very stupid, flashed the wrong boot.img and ended up completely bricking my device. I tried changing the active partition to see if it would boot, that didn't help.
I was on the latest august update of official android 11 . Then I found a boot.img I found online, but apparently it wasn't from the exact same rom. The phone booted but no WIFI.
It wouldn't allow me to flash any update through settings - system update hence I decided to try to use a fastboot rom....tried that, but the process when I hit flash_all.bat gives a lot of FAILED (remote: Flashing is not allowed for critical particions) or FAILED (Error reading sparse file)....what am I doing wrong?
I can't do anything except get in fastboot.
Is there any way I can get the phone to work agan? Needless to say that as the idiot I am the whole phone is wiped so this doesn't matter anymore. As long as I can get it to work.
Please advise and thanks (The phone is OP7T Pro ME european).
You can use this tool: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4002909/
leginhee said:
You can use this tool: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4002909/
Click to expand...
Click to collapse
Thanks the problem is i can't get it to start qualcomm edl. I power off, press both vol buttons and conmect to usb but nothing happens. What am i doing wrong?
Qualcomm edl Mode is just a blackscreen
"I can't do anything except get in fastboot."
Your Bootloader was unlocked ?
You can try fastboot reboot edl.
Or you can find a ROM that works, extract all images and flash all of them.
I have a similar problem.. kind of. I just flashed a rooted boot to my phone but there is no wifi at all, and since i dont have a SIM card im not getting any updates. the Boot.img came from the oneplus software update and i did the payload dumper. Since I have rooted it ive lost the wifi capabilites. (its the 7T pro me international.)
Hello guys,recently i tried to custom rom my mi 11 lite 5g(renoir)with pixel expirience i flashed the rom and hit reboot.I got a blank screen.Plugged it in and... QLOADER so i tried flashing it with mi flash tool,didint work,some error with hello packets.So i tried qfil And... SAHARA ERROR i literally tried reinstallig drivers reinstalling qfil,qpst even got and downloaded EVERY SINGE qfil verision and still nothing.Please i need urgent help!Here are some logs
You need a paid server to be able to flash the device
In addition, it should be Find My Device OFF
wdym paid server?
Ezzikmc said:
Hello guys,recently i tried to custom rom my mi 11 lite 5g(renoir)with pixel expirience i flashed the rom and hit reboot.I got a blank screen.Plugged it in and... QLOADER so i tried flashing it with mi flash tool,didint work,some error with hello packets.So i tried qfil And... SAHARA ERROR i literally tried reinstallig drivers reinstalling qfil,qpst even got and downloaded EVERY SINGE qfil verision and still nothing.Please i need urgent help!Here are some logs
Click to expand...
Click to collapse
Now i have another error:ERROR: It took 10.03100000 seconds to open port. Which is longer than 3.000. This indicates your target is not stable}
Ezzikmc said:
wdym paid server?
Click to expand...
Click to collapse
MasterLA said:
You need a paid server to be able to flash the device
In addition, it should be Find My Device OFF
Click to expand...
Click to collapse
Now i have another error:ERROR: It took 10.03100000 seconds to open port. Which is longer than 3.000. This indicates your target is not stable}
Quote Reply