hey there,
today i have hard reset a Galaxy S3, but after it reboot it get stuck on optimizing apps, the loading icon not frozen but waited long time and always the same optimizing apps screen.
things i have noticed; the battery drain so fast
i can't enter the factory mode or download mode.
please if anyone got this problem before please help
thank you
sorry for my English
Do the hardware buttons work on the phone?
Have you tried a USB jog to force the phone into download mode?
What ROM is on the phone?
audit13 said:
Do the hardware buttons work on the phone?
Have you tried a USB jog to force the phone into download mode?
What ROM is on the phone?
Click to expand...
Click to collapse
i am not sure if they work! and now i can't determine that
the usb port is no longer working, i don't know where is the problem
the phone hat the original rom
thank you for your time
update: the home button doesn't work, so i guess the problem can be solved only if o repair the home button
yes like i said the problem was from the home button
i fixed it and all went good after
thank you everyone
Related
Dear all hope you all are good i yesterday while updating firmware software from phone option after restart my phone is stucked at flash mode i even loaded stock firmware usint flashtool everything done ok but when i unplug my mobile its still in off condition even pressing power button removing battery and placing again and pressing power but nothing on screen but when i plug my usb to pc without pressing back button it shows that phone is in flash mode many times i removed and plugged but same issue i think it stuck at flash mode please help...
kashifmac2005 said:
Dear all hope you all are good i yesterday while updating firmware software from phone option after restart my phone is stucked at flash mode i even loaded stock firmware usint flashtool everything done ok but when i unplug my mobile its still in off condition even pressing power button removing battery and placing again and pressing power but nothing on screen but when i plug my usb to pc without pressing back button it shows that phone is in flash mode many times i removed and plugged but same issue i think it stuck at flash mode please help...
Click to expand...
Click to collapse
thanks alot guys i found the solution here below
xpneov said:
never mind guys.. i found the reason of brick and solution too on the below link
http://forum.xda-developers.com/showthread.php?t=1598160
Click to expand...
Click to collapse
thank you so much same issue i faced and resolved now using this information whatever how i unlocked the bootloader i don't care my phone is restored and next time i will be careful regarding OTA update.
once again thanks buddy coz i searched alot but found it here in your reply
A collegue thought it would be interesting to see what the wipe data command on Exchange would do to my phone.
It appears to have bricked it.
The phone boots, shows the THL logo for a few seconds then shows a dark grey screen.
Is this phone recoverable.
I am a complete noob, first post, so if it is recoverable I'm going to need real step by step basic instructions.
Hope there is somebody who can help.
Thanks.
ChrisGrahamUK said:
A collegue thought it would be interesting to see what the wipe data command on Exchange would do to my phone.
It appears to have bricked it.
The phone boots, shows the THL logo for a few seconds then shows a dark grey screen.
Is this phone recoverable.
I am a complete noob, first post, so if it is recoverable I'm going to need real step by step basic instructions.
Hope there is somebody who can help.
Thanks.
Click to expand...
Click to collapse
I got this result too...only grey screen after ThL logo. Can't get into neither recovery mode nor dowlnload mode. Please help
It happened to me too, exactly the same steps and now it is the same thing: logo and after that a black screen. Please, any solution? My wife is gonna kill me (it is her phone):silly:
A hard reset could save your life..
Press and hold the volume (-) button and then press the power button for about 3 seconds, release the volume (-) button when the screen comes and wait for repair menu. It's written in Chinese. Go to the part which is writing MMC at the end with the volume (-) button and press the power button. You are now in the hard reset menu, press the power button again and wait until the phone opens. That's all. You will lose all your programs which you installed before if you didn't back up before but the phone will work. I saved my W200S yesterday with same solution.
Thanks for your advice. I noticed the Chinese menu but I avoided it every time being afraid of not ruining something . Anyway, these days I've found out how to flash new ROMs so I am fooling around with trying different ROMs, I got allowance from my wife for this ). I am trying to fix an issue of the stock ROM, the proximity sensor doesn't light up the display when taking away from ear. The phone was not rooted so any attempt to enter engineering mode failed. Yesterday I discovered a MIUI ROM which looks very stylish and it solved the proximity sensor and even added the notification LED option (this was not included in the stock ROM). Now I have to test the battery life.
motanbigcat said:
A hard reset could save your life..
Press and hold the volume (-) button and then press the power button for about 3 seconds, release the volume (-) button when the screen comes and wait for repair menu. It's written in Chinese. Go to the part which is writing MMC at the end with the volume (-) button and press the power button. You are now in the hard reset menu, press the power button again and wait until the phone opens. That's all. You will lose all your programs which you installed before if you didn't back up before but the phone will work. I saved my W200S yesterday with same solution.
Click to expand...
Click to collapse
I have the same problem with a black screen, the buttons do not work nothing happens Please help
THLW200S - Cyanogenmod 11
Hi, I solved all the issues of my THLW200S (lack of notification LED and improperly functioning of the proximity sensor) by flashing this ROM. I tried a few other ROM's but this one works flawlessly.
kasperski86 said:
I have the same problem with a black screen, the buttons do not work nothing happens Please help
Click to expand...
Click to collapse
Hi, I had the same problem with my W200S, did you solved in any way?
Can you help me?
Thanks
fagh3r said:
Hi, I had the same problem with my W200S, did you solved in any way?
Can you help me?
Thanks
Click to expand...
Click to collapse
Hi i had the same problem a grey screen no recovery mode and i fix it when flashing a new rom.
I use flash tools and i choose (format +download) tab.
I have this same problem, but i can't even get into the safe mode, the chinese one. it just boots up at the thl logo but still only dark grey screen. please help since i tried everything else
Hello Guys,
Please help, S6 Edge phone suddenly died and when I turn it back on it's stuck on boot up and the samsung logo is overlapping like it's program was corrupted. Also, pink flashing light is appearing on the notification light (upper left). have held down Vol Up, Home Button and Power for 5 mins, and it still just shows that same screen above. I then press Vol Down, Home Button and Power for apporx 10 seconds but still to no avail.
Does anyone of you experienced this kind of issue? Tried searching from different forums but to no avail. I think I am the first one to encounter this Please advise if this is hardware or software issue and if possible the first action I will do. Will be very grateful for your kind response.
Please email me if you have experienced this type of issue and for further details: [email protected]
Thank you so much and best regards
Same here - bootloop at Samsung logo and no recovery. Flashed countless times with Odin , whole rom , recoveries , kernels . Recovered with Smart Switch , still nothing even when all procedures where successful. It looks like is a hardware problem.
engrstephencas said:
Hello Guys,
Please help, S6 Edge phone suddenly died and when I turn it back on it's stuck on boot up and the samsung logo is overlapping like it's program was corrupted. Also, pink flashing light is appearing on the notification light (upper left). have held down Vol Up, Home Button and Power for 5 mins, and it still just shows that same screen above. I then press Vol Down, Home Button and Power for apporx 10 seconds but still to no avail.
Does anyone of you experienced this kind of issue? Tried searching from different forums but to no avail. I think I am the first one to encounter this Please advise if this is hardware or software issue and if possible the first action I will do. Will be very grateful for your kind response.
Please email me if you have experienced this type of issue and for further details: [email protected]
Thank you so much and best regards
Click to expand...
Click to collapse
So sorry to hear that your facing those problems. Maybe this article can help you to fix the issue. Which rom.version did you had ?
https://www.google.gr/amp/thedroidg...king-other-power-related-problems-1050166/amp
StonebridgeGr said:
So sorry to hear that your facing those problems. Maybe this article can help you to fix the issue. Which rom.version did you had ?
https://www.google.gr/amp/thedroidg...king-other-power-related-problems-1050166/amp
Click to expand...
Click to collapse
Thanks but none of the suggestions from this article works .
Phone can not enter recovery , just download mode. Flashing doesn't change anything , phone just bootloops with white-pinkish led .
I wonder if bootloader is corrupted . Odin flash or Smart Switch recovery supposed to flash bootloader too , but still same problem .
seaman5705 said:
Thanks but none of the suggestions from this article works .
Phone can not enter recovery , just download mode. Flashing doesn't change anything , phone just bootloops with white-pinkish led .
I wonder if bootloader is corrupted . Odin flash or Smart Switch recovery supposed to flash bootloader too , but still same problem .
Click to expand...
Click to collapse
Did you try to download another stock Rom from sammobile and flash it? Maybe you have to unplug the battery and reinstall it if it stucks. I don't know what else to say :/ really :/
Hi there,
a friend of mine gave me her completely original and stock Galaxy S 3 Neo that got stuck in a bootloop while she was using it.
If you power up the phone, it shows the Samsung Galaxy logo, then proceeds to load the animated logo with the music, but as soon as the first second of music is played, the phone bootloops.
If I try to boot in recovery mode (Home+Power+Volume UP), it bootloops.
If I try to enter Odin mode (Home+Power+Volume DOWN), it bootloops.
Could anyone please explain to me the steps I have to do in order to recover this phone? It is absolutely ESSENTIAL not to delete the internal storage data, because she keeps there many photos of his son (with no backup... how clever)...
Thanks a lot!
Do you see the download or recovery screen before it bootloops?
audit13 said:
Do you see the download or recovery screen before it bootloops?
Click to expand...
Click to collapse
Yes. It reboots after just a few seconds I see recovery or dowload mode, bu it actually loads them before rebooting. The phone is even recognized by Odin just before it reboots.
Are you sure the battery is okay and fully charged? It's possible that the power button is stuck.
audit13 said:
Are you sure the battery is okay and fully charged? It's possible that the power button is stuck.
Click to expand...
Click to collapse
I don't know if the battery is ok... I tried to remove the battery plug the phone but it won't start without. I don't have another battery to try...
It may be the power button whereby the button is stuck in the "pressed" position.
audit13 said:
It may be the power button whereby the button is stuck in the "pressed" position.
Click to expand...
Click to collapse
The power button clicks ok so it doesn't look like it is stuck... I'll look more into it
Edit: WTF I can access download mode just by pressing Home and Volume down, so it seems the power button IS stuck even if it clicks normally...
Although it clicks, it may be stuck in the pressed position.
If you have a multimeter, you could test the power button contacts.
I found this video: https://m.youtube.com/watch?v=rOCa-hQQ2Ko
Damn, it really was stuck! I hit the side of the phone a bunch of time with a pen and the button got un-stuck! Thanks for the help!
davidrf said:
Damn, it really was stuck! I hit the side of the phone a bunch of time with a pen and the button got un-stuck! Thanks for the help!
Click to expand...
Click to collapse
So it works now?
The Nexus 5 is famous for its failing power button.
audit13 said:
So it works now?
The Nexus 5 is famous for its failing power button.
Click to expand...
Click to collapse
Yeah it works perfectly. It just had the need to be hit a couple of times :laugh:
I have problem with getting back to stock fullmics 5.5 on h850. I have installed it reboot and now Im stuck in secure start-up lock pattern from previous rom I believe. Pattern wont work and also meanwhile "FC system UI has stopped" warning is showing all the time.
I can get into download mode but port is not recgonized in vista so ADB cant be used (WHQL usb drivers 4.4.2 are installed ok)
problem is also that I cant get into recovery mode or
factory reset menu from startup, seems power button down procedure wont work like previously did...for some reason bootloader warning appears almost immediately after power on so power button off and on for a sec like I believe it should, has no effect.
Im really getting out of ideas to solve this...tech brain of the world please gather for help
fonejay said:
I have problem with getting back to stock fullmics 5.5 on h850. I have installed it reboot and now Im stuck in secure start-up lock pattern from previous rom I believe. Pattern wont work and also meanwhile "FC system UI has stopped" warning is showing all the time.
I can get into download mode but port is not recgonized in vista so ADB cant be used (WHQL usb drivers 4.4.2 are installed ok)
problem is also that I cant get into recovery mode or
factory reset menu from startup, seems power button down procedure wont work like previously did...for some reason bootloader warning appears almost immediately after power on so power button off and on for a sec like I believe it should, has no effect.
Im really getting out of ideas to solve this...tech brain of the world please gather for help
Click to expand...
Click to collapse
Go into twrp format data type yes how I fixed it on mine
TheMadScientist said:
Go into twrp format data type yes how I fixed it on mine
Click to expand...
Click to collapse
Why dont you fully read what I wrote
"...problem is also that I cant get into recovery mode or factory reset menu from startup, seems power button down procedure wont work like previously did...for some reason bootloader warning appears almost immediately after power on so power button off and on for a sec like I believe it should, has no effect."
ps: please excuse my writing my first language is clearly not english :fingers-crossed:
edit: just right now I opened phone up for check if buttons are OK...well turns out I wrecked button pins on motherboard.f*ck...now I know why I cant get into powerup menus...more specific I wrecked power button down pin on MB while opening back case with plastic card fkmylajf. Can be closed. SORRX
edit2: luckly I solved problem with straighteing pins so now twrp works as it should. What a noobish mistake huh...Be careful w with opening case!!??!
fonejay said:
Why dont you fully read what I wrote
"...problem is also that I cant get into recovery mode or factory reset menu from startup, seems power button down procedure wont work like previously did...for some reason bootloader warning appears almost immediately after power on so power button off and on for a sec like I believe it should, has no effect."
ps: please excuse my writing my first language is clearly not english :fingers-crossed:
edit: just right now I opened phone up for check if buttons are OK...well turns out I wrecked button pins on motherboard.f*ck...now I know why I cant get into powerup menus...more specific I wrecked power button down pin on MB while opening back case with plastic card fkmylajf. Can be closed. SORRX
edit2: luckly I solved problem with straighteing pins so now twrp works as it should. What a noobish mistake huh...Be careful w with opening case!!!
Click to expand...
Click to collapse
Sorry bout that mate I speed read a lot of stuff and sometimes miss Key details:silly::silly:
I ran into the problem with the corrupt startup and couldn't get out of it.So thats what I saw...
I run across a lot of devices so i spend a lot of time reading many many pages hard to catch it all