Hello,
I'm looking for my stock kdz however i cant figure out what region my device is.
On Lg servers i get <model>LGABCD</model> <suffix>XABCXX</suffix>
However i cant find this file.
My imei is: 357657074913993
I have had the phone imei unlocked in the past.
Thank You
Dw found it: https://www.imei.info/check/lg-free/3599c7bf-a659-448b-a3b7-0834b72c667d/send/
Related
hello. on vodafone firmware 10d, i try to flash firmware kdz ver. 10e from wind or 10g from tim italy, but that is the advertisement i have after flashing and second reboot. i reset already but at every reboot the same advertisement. when i click on OK, the phone boots, but i want remove this error. can anyone tell me if is possible??
i use lg up
thanks
That's been covered plenty of times in the G5 (and even G3) forums, for example here:
http://forum.xda-developers.com/g4/help/lg-h815p-fix-matched-cust-nt-code-mmc-t3336034
http://forum.xda-developers.com/showpost.php?p=67285155&postcount=84
http://forum.xda-developers.com/showpost.php?p=67223982&postcount=73
If you use the search you'll find even more threads with it.
doesn't work the hidden menu access
with TWRP or root file explorer, navigate to root/cust and delete all folder content then reboot
you'll see message will no longer show up after reboot
i am not rooted
with no root there is no way as far as I know
hi, can you tell me where you found the v10g kdz? i only managed to find the wind v10e (and doesn't solve the direct sunlight issue)
thank you (anche in pm se vuoi)
v10g KDZ is only for some carriers
note: the base is kind of the same for lets say v10d OPEN EUR kdz and v10g carrier kdz, so thinking that installing v10g carrier branded version does not mean you are more updated then v10d OPEN EUR
Thank you!
I went to sell my G5 today, and the shop refused to buy it because of that pop-up on boot.
Just curious though, now I have erased the folder, what would happen if I -
a) Unroot
b) Relock the bootloader
I am on a global stock rom V-20v I believe.
I want my Virgin Moble UK G5 to think it's H3G in order to get WiFi calling to work. So instead of deleting all the files in '/cust' I updated op_list.cfg & cust_path_mapping.cfg by adding the missing MCC/MNC code from the error message and pointing them to the same place as the H3G entries, in my case
'23430,FF=/OP/H3G_COM'.
The phone now boots up without the 2 error messages (OP name by Buyer Code & Current version is not available) but I get the 'Buyer Code' message a few minutes after booting.
I'm not sure if changing the files, or deleting them is best. But with the files updated, looking at the Global Settings via ADB shows that wfc_ims_enabled=1
Hello everyone, I'm residing in Korea by the moment... my carrier is olleh (KT)... I used to have an LG G pro 2 from the carrier so had no problem at all. recently I switched to a new G5. the problem now it's the model is F700L (from other carrier) and there are some benefits I get with my carrier (KT) that I can't when the phone doesn't match the same carrier ...
I've been reading and researching about changing the rom to the one from the other carrier, and LGUP throws error when saying: Error F700L > F700K ... I know there won't be any problem doing this because the hardware is the same. And as far as I know there's no possible way to root the phone and unlock the bootloader or install a custom one for later on install the other rom from there... :silly::crying::crying: .... so....
after so many days trying got disappointed and annoyed... gotta ask... is there any other way to flash without confirmation? (with Odin or other?... FlashTools doesn't get to communicate with the device in download mode... and LG Flash.. requires a DLL and can't find it anywhere...) ... or getting inside the phone using ssh (i'm linux user) or other with the help of the adb ... and get to edit the model just to change the freaking L by a K??
The other possible way could be editing the actual KDZ to match the info... I've tried WinHex but LGUP says: Invalid KDZ after the edition.... some other way?
will appreciate any idea... thanks!
A few days ago LG G2 Mini LTE D620FR was suddendly bricked. After I searched on the internet, I found a solution how to unbrick it. Although I flashed the certain kdz file according to its IMEI number, I have no service on it.
My IMEI indicates that my product comes from France but I'm using it in another country (Greece) so also flashed the greek rom but nothing changed.
Sim cards from various carriers are detected (Cosmote and Vodafone) but it shows zero signal.
Also before the brick the phone worked fine (cellular network) and it wasn't rooted.
I have been searching for days in order to find a solution, so I really appreciate if any of you have a clue about how to overcome this problem.
Thanx in advance
The problem might be on the EFS partition.
I think that's how it's called.
It contains information required to connect to the network.
I'm not sure how to fix it. Look it up online.
-Καληνυχτα
Vagelis1608 said:
The problem might be on the EFS partition.
I think that's how it's called.
It contains information required to connect to the network.
I'm not sure how to fix it. Look it up online.
-Καληνυχτα
Click to expand...
Click to collapse
Alright, I'll check about the EFS and I'll let you know whether I solved the problem or not.
Thanks for the reply. :fingers-crossed:
LG V10 H90121j bricked after update which was successfully completed but phone does not turned on after that. I manage to unbrick through H90020w qfil and get access to update firmware screen. Now again every H901 kdz updated 100% but phone again bricks and not turning on. Please help me to restore my phone. I think I should unbrick with H901 qfil instead of H90020w. Please support.
Shan1122 said:
LG V10 H90121j bricked after update which was successfully completed but phone does not turned on after that. I manage to unbrick through H90020w qfil and get access to update firmware screen. Now again every H901 kdz updated 100% but phone again bricks and not turning on. Please help me to restore my phone. I think I should unbrick with H901 qfil instead of H90020w. Please support.
Click to expand...
Click to collapse
Dear shan, sould have read these forums before updating, I had the same misfortune when i updated my v10 through LG bridge, chances are you have a refurbished phone like me, where the motherboard is of a different version/country/carrier than the software, I have a korean f600l which i came to know after bricking my phone, the only ,method to revive it is to use the h90020w method but it will convert your tmobile to AT&t with fingerprint , vpn issues, unable to uninstall apps and in extreme cases like mine no radio, but atleast it works that fine for me, but if you want to make calls then dont go for it, first identify your board then ask for help from other senior members ,or others who have the same model . andn please do update if you are successful so that others may benefit from your method.
last gspian said:
Dear shan, sould have read these forums before updating, I had the same misfortune when i updated my v10 through LG bridge, chances are you have a refurbished phone like me, where the motherboard is of a different version/country/carrier than the software, I have a korean f600l which i came to know after bricking my phone, the only ,method to revive it is to use the h90020w method but it will convert your tmobile to AT&t with fingerprint , vpn issues, unable to uninstall apps and in extreme cases like mine no radio, but atleast it works that fine for me, but if you want to make calls then dont go for it, first identify your board then ask for help from other senior members ,or others who have the same model . andn please do update if you are successful so that others may benefit from your method.
Click to expand...
Click to collapse
hey, sorry for late reply. Thank you for your answer. I got solution but as you said, with no Radio, I cannot make calls. my imei shows only 0-17. I think my imei totally erased. my methode was to debrick with file H90021w and then flash with H90021w.dz file. I convert kdz file to dz file by using LG_Firmware_Extract_v1.2.6.1. these files are available on internet. I got my phone back to life but without network. Phone is booting with AT&T logo and working fine other then network issue.
can anyone help me with network issue now?
I had a ntt docomo v60, then i flashed a eu rom and my imei is null, serial gone, unknown baseband, and many problems, network not working says permantly blocked. Solution will be much helpful i can pay if all gets working. Waiting for reply. Help from devs needed.
Can you tell me how you updated it to eu rom?
I know it's impossible without Medusa. Could you tell me if there is any other way?
Cover the modem extract from the docomo genuine modem file QPST that fits the Android version
As far as I know, softbank a001lg has experienced the same network problem after cross-flashing. As far as I know, it was solved by putting a pure modem in QPST.
I updated using lgup. I dont have other rom but i have asked a friend who was lg v60 with working network for backup. Will it work ?? I need options. But i am not able to use qfil also as it doesnt show anything.
lg up, are you done? Can you tell me what the article you mentioned?
andamiro00 said:
lg up, are you done? Can you tell me what the article you mentioned ?
Click to expand...
Click to collapse
Need a lg v60 rom. I exactly need my phone in working condition, what shall i query ?
your imei is gone, no network anymore, no fix method in the current.
about kdz rom you want, you can easy find " V60 Tmobile kdz download" in google search.
dangtoi1993 said:
your imei is gone, no network anymore, no fix method in the current.
about kdz rom you want, you can easy find " V60 Tmobile kdz download" in google search.
Click to expand...
Click to collapse
Cant any efs backup workout ?
tusharj2003 said:
Cant any efs backup workout ?
Click to expand...
Click to collapse
no work,
you can findout many thread in this V60 section about imei, qcn, efs, modemst,...etc..
tusharj2003 said:
Need a lg v60 rom. I exactly need my phone in working condition, what shall i query ?
Click to expand...
Click to collapse
QFIL backs up modem_a, modem_b on genuine docomolg v60
Cover your device with modem_a, modem_b If the hidden menu - SVC - MIN informatin has an IMPL of 0, the imei cereal may be modified.
Another way is to find a way to modify the imi, s/n in FTM in QFIL
Please help me if you can help me.
I understood that it was cross-flashed with LG UP.
I also tried cross-flashing Japanese printing equipment, but it failed. The softbank device has no more updates, so I'm going to cross-flash with T-Mobile.
If you referred to any article, please link it.
andamiro00 said:
QFIL backs up modem_a, modem_b on genuine docomolg v60
Cover your device with modem_a, modem_b If the hidden menu - SVC - MIN informatin has an IMPL of 0, the imei cereal may be modified.
Another way is to find a way to modify the imi, s/n in FTM in QFIL
Please help me if you can help me.
I understood that it was cross-flashed with LG UP.
I also tried cross-flashing Japanese printing equipment, but it failed. The softbank device has no more updates, so I'm going to cross-flash with T-Mobile.
If you referred to any article, please link it.
Click to expand...
Click to collapse
How to Flash Stock Firmware on LG Smartphone ? - LG-Firmwares.com
Tutorial how to flashing LG device. Change or update Firmware on LG phones.
lg-firmwares.com
I done from this and also post from xda.
andamiro00 said:
QFIL backs up modem_a, modem_b on genuine docomolg v60
Cover your device with modem_a, modem_b If the hidden menu - SVC - MIN informatin has an IMPL of 0, the imei cereal may be modified.
Another way is to find a way to modify the imi, s/n in FTM in QFIL
Please help me if you can help me.
I understood that it was cross-flashed with LG UP.
I also tried cross-flashing Japanese printing equipment, but it failed. The softbank device has no more updates, so I'm going to cross-flash with T-Mobile.
If you referred to any article, please link it.
Click to expand...
Click to collapse
Hi I have a v60 l-51a docomo variant
Did you successfully crossflashed
I want to enable volte
Please help me as well