hi...
ill try to flash my phone but always get stuck at ... "system.img"
Flash tools Odinv3.12.7
Firmware i tried G925F_1_20180809104101_qr55subv5q_fac ----- SM-G925F_1_20180716174114_hxg9p8nitx_fac
log.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
also tried
G925FXXU1AOCV_G925FDDX1AOCV_DTM
G925FXXU2POGN_G925FDDX2POGO_DTM
G925FXXU6ERF5_G925FDDX6ERG1_DTM
DBT-G920FXXU2BOFJ
nothing works^^
should i try one of these?
updato.com/firmware-archive-select-model?q=SM-G925F&exact=1&r=DTM&v=&rpp=50
unnamedquaker said:
hi...
ill try to flash my phone but always get stuck at ... "system.img"
Flash tools Odinv3.12.7
Firmware i tried G925F_1_20180809104101_qr55subv5q_fac ----- SM-G925F_1_20180716174114_hxg9p8nitx_fac
log.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
also tried
G925FXXU1AOCV_G925FDDX1AOCV_DTM
G925FXXU2POGN_G925FDDX2POGO_DTM
G925FXXU6ERF5_G925FDDX6ERG1_DTM
DBT-G920FXXU2BOFJ
nothing works^^
should i try one of these?
updato.com/firmware-archive-select-model?q=SM-G925F&exact=1&r=DTM&v=&rpp=50
Click to expand...
Click to collapse
You did not inform about your device situation details and ROM details. including android versions
x1123 said:
You did not inform about your device situation details and ROM details. including android versions
Click to expand...
Click to collapse
it is not my smartphone. I got it with the message "damaged device memory" after an update.
status : nothing on the phone (recovery only)
twrp not working (unable to mount anything)
Related
Hi guys,
Got a red samsung s3 (gt-i9300).
The phone wont start normally, it will just hang at the phone start screen when you press the power button.
The phone is unrooted and on stock rom. I can get in both download mode & recovery mode.
I tried flashing rom using odin but got this error instead:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Going into recovery mode will display lots of errors like this (pls refer attachment)
Can you guys please advise me on what I can do to revive the phone?
Any help would be appreciated.
Thanks!
try to flash emergency firmware ,if not ,then service
alecore said:
try to flash emergency firmware ,if not ,then service
Click to expand...
Click to collapse
how to flash emergency firmware?
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 here
follow the steps and you will be fine
alecore said:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 here
follow the steps and you will be fine
Click to expand...
Click to collapse
It didn't work.... Y__Y
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Your emmc chip is damaged, new motherboard required.
hi ... i'm using galaxy s3 gt i9300 and have been using cm11 for 6 months normally..
yesterday suddenly my phone was stuck at samsung screen ... i tried twrp to reinstall cm11 but when i tries to factory reset it fails and shows a bunch of errors like :
unable to mount system
unable to mount data
unable to mount storage .. etc
then i tried to install from micro sdcard but it shows 0mb same as internal storage..
i tried to flash cm11 via adb from pc but it also fails
can you help me ?
thanks
i tried but it also failed it says in log box : re-partition operation failed
this is what i get when i try to flash another recovery (philz) :
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> PK
<ID:0/003>
and gets stuck at NAND Write Start!! forever
any1 can help ???
@black leg try to flash stock rom using odin !!!
princevirus said:
@black leg try to flash stock rom using odin !!!
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMK6_REV02_REV04_CL1413323.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9300OXAGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9300XXUGMK6_2168382_REV00_user_low_ship_.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
also tried to only flash the rom and tried to flash with pit file but it always fails or gets stuck at nand start all
I will pay Bitcoin for successful help.
I tried to downgrade from 6.0.1 to 5.1.1 but my phone never booted up. I'm trying to return to 6.0.1 but I receive the error: "SW REV. Check Fail. Device: 4, Binary: 3" and this is the log for ODIN:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G925AUCU3BOJ7_CL5927475_QB6773811_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G925AUCU3BOJ7_CL5927475_QB6773811_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_G925AATT3BOJ7_CL5927475_QB6773811_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G925AUCU3BOJ7_CL5927475_QB6773811_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm using the restore files from the following post: http://forum.xda-developers.com/att.../g925aucs4cpf1-odin-firmware-restore-t3408875
What is going on with my phone? If I check just the AP option then the phone never ends up booting but if I check BL, AP, CP, and CSC then I receive the above error. The ODIN version is 3.10.7
I can't update my firmware on my galaxy s6 edge. Odin log
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Dr.Syg'z said:
I can't update my firmware on my galaxy s6 edge. Odin log
Click to expand...
Click to collapse
incorrect firmware. sboot.bin means your trying to downgrade bootloader.
unpack firmware and remove sboot.bin, repack and flash again
I once tried to autoroot it but I factory reset it because the sim didn't work, and I went to developer options and had it OEM Locked, I don't know what was I thinking, seriously, and I tried to use Odin v3 to flash original firmware into it, It gives me this: <ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 2546 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried using multiple odin's and I have a Samsung usb driver installed.
Android Recovery
Samsung/j5y17ltexx/j5y17lte
7.0/NRD90M/J530FXXU1AQF5
Please Help Me I Have No Phone Currently, The Small And Big Are Going To Be Appreciated, Sincerely, RetroSkills.