Honor 7C How to root? - Android Q&A, Help & Troubleshooting

Hey,
I have unlocked the bootloader in Honor 7C (LND-L29). (dcunlocker)
I was looking on the internet and I can not find anywhere.
twrp does not work on this phone. It can not be installed by the command flash recovery twrp.img
How do you install root? Kingroot does not work

remkac96 said:
Hey,
I have unlocked the bootloader in Honor 7C (LND-L29). (dcunlocker)
I was looking on the internet and I can not find anywhere.
twrp does not work on this phone. It can not be installed by the command flash recovery twrp.img
How do you install root? Kingroot does not work
Click to expand...
Click to collapse
Sup,
Before proceeding, enable "manufacturer mode" on your phone. This is done by entering in dial pad code *#*#2846579#*#* select "Project Menu", "Background settings", "USB ports settings", "Manufacture mode". Then connect it to PC and Hisuite for drivers.
flash TWRP made by Augustoandro, flash Supersu
Greetz

Leak1337 said:
Sup,
Before proceeding, enable "manufacturer mode" on your phone. This is done by entering in dial pad code *#*#2846579#*#* select "Project Menu", "Background settings", "USB ports settings", "Manufacture mode". Then connect it to PC and Hisuite for drivers.
flash TWRP made by Augustoandro, flash Supersu
Greetz
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fastboot flash recovery TWRP_Honor7C_LND-L29.img
target reported max download size of 534773760 bytes
sending 'recovery' (4896 KB)...
OKAY [ 0.144s]
writing 'recovery'...
FAILED (remote: partition table doesn't exist)
finished. total time: 0.183s

remkac96 said:
fastboot flash recovery TWRP_Honor7C_LND-L29.img
target reported max download size of 534773760 bytes
sending 'recovery' (4896 KB)...
OKAY [ 0.144s]
writing 'recovery'...
FAILED (remote: partition table doesn't exist)
finished. total time: 0.183s
Click to expand...
Click to collapse
Ok, have you tried the multitool? MultiTool Honor 7
Step by step Tutorial look if you have done everything and try it with the tool. Tutorial

Leak1337 said:
Ok, have you tried the multitool? MultiTool Honor 7
Step by step Tutorial look if you have done everything and try it with the tool. Tutorial
Click to expand...
Click to collapse
We managed to install, but internal memory in twrp does not work.
After several attempts to repair twrp. The system does not turn on in the phone. He is now trying to install the rom from the new version using Huawei eRecovery

I also tried to upload the twrp from this topic: https://4pda.ru/forum/index.php?s=&showtopic=909546&view=findpost&p=78962423
After uploading by multitool, it does not even turn on twrp.
If someone has uploaded root on this phone, let them write in what way. I've tried many options and still nothing of it.
Sorry my bad english.

remkac96 said:
I also tried to upload the twrp from this topic: https://4pda.ru/forum/index.php?s=&showtopic=909546&view=findpost&p=78962423
After uploading by multitool, it does not even turn on twrp.
If someone has uploaded root on this phone, let them write in what way. I've tried many options and still nothing of it.
Sorry my bad english.
Click to expand...
Click to collapse
All twrp installed by me does not load internal memory.

Can uh tell me how you unlocked the bootloader?
Hey man, its great to hear this first of all that you successfully unlocked the bootloader,
Please tell how you unlocked it.
Thanks in advance for you help.

Related

How to install KangVIP EMUI3.0.5 B015 on X2 GEM-702L

ROM: B015 Kangvip root Lollipop 5.0 EMUI 3.0.5 Download from
https://docviewer.yandex.com/?url=y...p.zip&name=X2-B015-Kangvip.zip&c=55d108a12903
Brush before, remember to back up important data:
1, the phone must be Bootloader unlocked
Official-Unlock-Bootloader-by-Alkalinorap-v4 download from:
https://www.dropbox.com/s/68me4nwh0boktsr/Official-Unlock-Bootloader-by-Alkalinorap-v4.zip?dl=0
2, ensure that the computer can connect to the phone, install a good driver
3, Install X2_TWRP_CN_kangvip
TWRP recovery download from:
https://docviewer.yandex.com/?url=y...ar&name=X2_TWRP_CN_kangvip.rar&c=5625426d40d9
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation Brush Pack
1. Copy X2-B015-Kangvip.zip to Internal storage
2. Click Installation Brush Pack
3. select X2-B015-Kangvip.zip on the root directory Internal storage
4. Slide for Install
5. Install complete, Clear cache/dalvik, Reboot
Read more:
http://cn.club.vmall.com/thread-5008975-1-2.html
http://cn.club.vmall.com/thread-4757514-1-2.html
Weak Point: KangVIP Rom on GEM-702L
Sim 1 : Nano sim (4G/3G)
Sim 2: Micro sim (2G)
Can't switch
eennap said:
Weak Point: KangVIP Rom on GEM-702L
Sim 1 : Nano sim (4G/3G)
Sim 2: Micro sim (2G)
Can't switch
Click to expand...
Click to collapse
Isn't this a GEM-703L version of mediapad x2 and not the GEM-702L?
The Mediapad x2 has its own forum now. Please post anything related to the X2 here:
http://forum.xda-developers.com/mediapad-x2
Help PliZ disassemble assemble OF 5.1.1 Huawei Ascend Mate 7 system (priv-app) Settings.apk + SystemUI.apk ?:crying:
Hey I hope you're still around because this is an amazingly good tutorial.
I'm new at flashing and I apologize. I'm getting stuck at the very beginning before I can even get to TWRP. When I get to run.bat, select option 1 and hit enter I get this.
---------------------------------------
╒²╘┌╦ó╚δ╓╨╬─ TWRP...
Flashing zh-CN TWRP...
target reported max download size of 471859200 bytes
sending 'recovery' (27042 KB)...
OKAY [ 0.583s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.588s
---------------------------------------
╦ó╚δ╩º░▄úí
Flash abortivelyúí
Press any key to continue . . .
It closes after this. Any help would be greatly appreciated. Thanks!
Jayremyho said:
Hey I hope you're still around because this is an amazingly good tutorial.
I'm new at flashing and I apologize. I'm getting stuck at the very beginning before I can even get to TWRP. When I get to run.bat, select option 1 and hit enter I get this.
---------------------------------------
╒²╘┌╦ó╚δ╓╨╬─ TWRP...
Flashing zh-CN TWRP...
target reported max download size of 471859200 bytes
sending 'recovery' (27042 KB)...
OKAY [ 0.583s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.588s
---------------------------------------
╦ó╚δ╩º░▄úí
Flash abortivelyúí
Press any key to continue . . .
It closes after this. Any help would be greatly appreciated. Thanks!
Click to expand...
Click to collapse
Also I have already flashed onto kangvip 015... Now i'm stuck at fastboot flash recovery RECOVERY.img That's where it gives me the Command not allowed error
Hopefully this helps someone in the future. I wasn't unlocked even though I paid for a code and everything. Remember to unlock it via fastboot. This resolved my issue!

how to fix huawei mediapad T1-701u stuck up on mediapad logo

i convert mx player to system app using luckeypatcher then it hangs i press the power button to restart the phone and its not booting still on huawei mediapad screen,,i tried recovery buttons still not work and also sd card upgrade firmware not working also..please help me.
up
download this firmware it's the stock one : from here
- Copy the extracted “dload” folder (containing Update.app file) to the main directory of your external SD Card.
- Next, turn off your device and insert the SD card.
- Reboot into forced SD upgrade mode by holding Vol Up + Vol Down + Power buttons at the same time until you see some text on the screen.
- It’ll take a few minutes to complete the update. After that, it will automatically shut down and reboot into the new OS.
Does not work for me
Tried diffrent SD cards and formattings and diffrent ways of holding the buttons, the problem occurred after a downgrade to stock rom from a rooted and bootloader unlocked rom.
i have same problem, please ant help?
i have same problem, please any help? i am unable to boot the tab , it only vibrates and still shows blackscreen.
bigal1337 said:
Does not work for me
Tried diffrent SD cards and formattings and diffrent ways of holding the buttons, the problem occurred after a downgrade to stock rom from a rooted and bootloader unlocked rom.
Click to expand...
Click to collapse
You cant
The reason why its because youve been very badly damaged the motherboard.... It happened to me before and the only you can do is to buy another one or if you have dat warranty of yours if its not Damn month.... Then you can tell that youve been installed to much stuffs into your internal storage...... I felt sorry for myself when it was happened to me..... Because it was stuck to that crappy logo.... I tried to drain it but sadly when i turn it on again.... It repeats the same method facking crap!!!!? Again the only you can do right now is to buy or to give to the manufacturer to where you buy it particularly with the warranty in you hand... Hope you have it with the box of it..... Sorru for your loss..?
Techpromaster said:
The reason why its because youve been very badly damaged the motherboard.... It happened to me before and the only you can do is to buy another one or if you have dat warranty of yours if its not Damn month.... Then you can tell that youve been installed to much stuffs into your internal storage...... I felt sorry for myself when it was happened to me..... Because it was stuck to that crappy logo.... I tried to drain it but sadly when i turn it on again.... It repeats the same method facking crap!!!!? Again the only you can do right now is to buy or to give to the manufacturer to where you buy it particularly with the warranty in you hand... Hope you have it with the box of it..... Sorru for your loss..
Click to expand...
Click to collapse
i got it to work again by saving the Dload folder in the memory card, then i held down volume up, volume down and power button all together
manyaro said:
i convert mx player to system app using luckeypatcher then it hangs i press the power button to restart the phone and its not booting still on huawei mediapad screen,,i tried recovery buttons still not work and also sd card upgrade firmware not working also..please help me.
Click to expand...
Click to collapse
how to do
Completely Stack
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to get root my New T1, But seems deadly trouble.
Is there any way?
I want to replace the hard disk,
how to fix my huawei t1-a21w
please help me
C:\Users\PC1\Downloads\Android Multi Tools v1.02b gsmforum>fastboot flash cust "C:\Users\PC1\Downloads\Android Multi Tools v1.02b gsmforum\CUST.img"
target reported max download size of 266338304 bytes
sending sparse 'cust' (259909 KB)...
OKAY [ 9.498s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 9.509s
C:\Users\PC1\Downloads\Android Multi Tools v1.02b gsmforum>fastboot flash recovery "C:\Users\PC1\Downloads\Android Multi Tools v1.02b gsmforum\RECOVERY.img"
target reported max download size of 266338304 bytes
sending 'recovery' (12984 KB)...
OKAY [ 0.425s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.432s
C:\Users\PC1\Downloads\Android Multi Tools v1.02b gsmforum>
please help me.. stuck on fastboot mode . i cant flash recovery

how to unlock bootloader in teclast p80x

in the Developer menu has enabled "Unlock OEM".
I run the following commands in adb, and get the following errors:
fastboot flashing unlock =
FAILED (remote: 'Not implemet.')
fastboot: error: Command failed
fastboot oem unlook =
FAILED (remote: 'unknown cmd.')
fastboot: error: Command failed
fastboot flash recovery recovery.img =
Sending 'recovery' (14100 KB) OKAY [ 0.599s]
Writing 'recovery' F**AILED (remote: 'Flashing Lock Flag is locked. Please unlock it first!')**
fastboot: error: Command failed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please help.
Thanks
+1, same thing happening to me, halp
shraga1 said:
in the Developer menu has enabled "Unlock OEM".
I run the following commands in adb, and get the following errors:
fastboot flashing unlock =
FAILED (remote: 'Not implemet.')
fastboot: error: Command failed
fastboot oem unlook =
FAILED (remote: 'unknown cmd.')
fastboot: error: Command failed
fastboot flash recovery recovery.img =
Sending 'recovery' (14100 KB) OKAY [ 0.599s]
Writing 'recovery' F**AILED (remote: 'Flashing Lock Flag is locked. Please unlock it first!')**
fastboot: error: Command failed
Please help.
Thanks
Click to expand...
Click to collapse
So we could not be able to root this tablet?
Im not even able to let the tablet and the pc communicate together. In adb devices there is no devices, i think is a drivers problem.... i cannot see the mmc of the tablet in my computer....
simone81 said:
Im not even able to let the tablet and the pc communicate together. In adb devices there is no devices, i think is a drivers problem.... i cannot see the mmc of the tablet in my computer....
Click to expand...
Click to collapse
which drivers have you installed?
pabloluih said:
which drivers have you installed?
Click to expand...
Click to collapse
I did connect the tablet to the pc, the problem was in the cable, now i can enter in fastboot but i dont know wich command to use to unlock the bootloader, i tried fastboot oem unlock and it give me as a result failed because unknown command. I hope there will be a way to root it because its very good device. The drivers i used are available online here https://www.getdroidtips.com/root-teclast-p80x-4g/
Go on youtube and find "Teclast Root Process for Android Tablet"
I haven't found a solution but thought this might help.
I thought this might be of some use - however on their website putting in the P80X ID doesn't yield any firmware.
Perhaps you guys can make heads and tails of it.
How do you even get in the developer menu? The usual build number clicking doesn't seem to work on the P80X
ttps://forum.hovatek.com/thread-32287.html
Explained in detail on this site.
few__ said:
ttps://forum.hovatek.com/thread-32287.html
Explained in detail on this site.
Click to expand...
Click to collapse
Thanks for the reply with information. I managed to unlock the bootloader shortly after i posted the message. I'm currently still stuck on flashing a patched magisk boot.img to it.
/edit: Funny, i posted the reply a few hours before i managed to flash a patched and signed boot.img
delete
null
mainframe_cn said:
Thanks for the reply with information. I managed to unlock the bootloader shortly after i posted the message. I'm currently still stuck on flashing a patched magisk boot.img to it.
/edit: Funny, i posted the reply a few hours before i managed to flash a patched and signed boot.img
Click to expand...
Click to collapse
how did you unlock the bootloader?
mainframe_cn said:
Thanks for the reply with information. I managed to unlock the bootloader shortly after i posted the message.
Click to expand...
Click to collapse
That's great and all, but HOW?
Remember, forums are not only for you, but for others too. Share your knowledge!

Question Fastboot loop, can't seem to find the right thing to flash

Hi, so I successfully installed TWRP from here, everything went well until this point. I flashed a more stable EU rom and then tried to flash Magisk, but when I rebooted it just went to fastboot mode.
Now everytime I try to turn it off or go back into TWRP it just goes to fastboot mode.
I have tried to flash using MiFlash but I can't seem to get the right thing to flash apparently.
When trying to reinstall TWRP
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 4.498s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Device Error)
finished. total time: 4.503s
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Zelyric said:
View attachment 5448807
Click to expand...
Click to collapse
Getting Mismatched image error in fastboot when trying to flash stable/developer ROM.
Hello.. Which fastboot rom is correct for my mido Device.. i downloaded Both Stable and Developer version both giving mismatched image error.. tried flashing from mi flash tool, flashed in 1sec issue.. Please help , how am i suppose to flash...
forum.xda-developers.com
I hope it helps.
akins0405 said:
Getting Mismatched image error in fastboot when trying to flash stable/developer ROM.
Hello.. Which fastboot rom is correct for my mido Device.. i downloaded Both Stable and Developer version both giving mismatched image error.. tried flashing from mi flash tool, flashed in 1sec issue.. Please help , how am i suppose to flash...
forum.xda-developers.com
I hope it helps.
Click to expand...
Click to collapse
Reading on that post I saw that there are issues with Ryzen powered computers, and I indeed have a Ryzen CPU. Really hopes this helps, thanks for showing me regardless - ill keep you updated!
@akins0405
Zelyric said:
@akins0405
Click to expand...
Click to collapse
Try flashing you stock boot img
akins0405 said:
Try flashing you stock boot img
Click to expand...
Click to collapse
Where do I find that?
Zelyric said:
Where do I find that?
Click to expand...
Click to collapse
You have it in fastboot stock rom
Zelyric said:
Where do I find that?
Click to expand...
Click to collapse
Try to transfer the rom to the system partition
akins0405 said:
Try flashing you stock boot img
Click to expand...
Click to collapse
adb doesn't show my device under adb devices but fastboot devices does show it..
MTP also is disabled
Zelyric said:
adb doesn't show my device under adb devices but fastboot devices does show it..
Click to expand...
Click to collapse
Flash in fastboot stock boot img, can you do it
akins0405 said:
Flash in fastboot stock boot img, can you do it
Click to expand...
Click to collapse
fastboot flash b boot.img
Sending 'b' (196608 KB) OKAY [ 4.817s]
Writing 'b' FAILED (remote: '(b_a) No such partition')
fastboot: error: Command failed
nevermind, i understood the partition wrong.
fastboot flash boot boot.img
Sending 'boot_a' (196608 KB) OKAY [ 4.558s]
Writing 'boot_a' OKAY [ 0.707s]
Finished. Total time: 6.103s
what now?
Zelyric said:
@akins0405
Click to expand...
Click to collapse
Try firstly erasing your recovery partition with fastboot erase recovery
Somehow I have managed to fix it on my own, thank you for your response regardless @akins0405 @SubwayChamp.
Here's how I fixed it for the people wanting to know:
I flashed boot.img via fastboot, I have no clue if it had effect on what I did afterwards but I think it might.
I moved the folder of all the files to my main C:\ directory, and then tried to flash using MiFlash and it worked.
I'm trilled to have it back in a ''working'' state
Zelyric said:
Somehow I have managed to fix it on my own, thank you for your response regardless @akins0405 @SubwayChamp.
Here's how I fixed it for the people wanting to know:
I flashed boot.img via fastboot, I have no clue if it had effect on what I did afterwards but I think it might.
I moved the folder of all the files to my main C:\ directory, and then tried to flash using MiFlash and it worked.
I'm trilled to have it back in a ''working'' state
Click to expand...
Click to collapse
I'm glad you made it, hello

How Unlock UniSOC Bootloader ?

I have a Unisoc UMS512 chipset device.
I can't unlock bootloader.
I do this link : https://forum.hovatek.com/thread-32287.html
But I take this error.
"
downloading 'unlock_message'...
OKAY [ 0.001s]
unlocking bootloader...
FAILED (remote: Unlock bootloader fail.)
finished. total time: 0.101s
"
What should I do ?
Please help me, Thanks
(Sorry my bad english)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UP UP UP. I need a help
I have unlocked my Motorola G20 with Unisoc T700 chipset with fastboot easily - without signature.bin. Then I had to follow instructions on the device to unlock. Try another USB 2.0 port and another cable too.
BASKAN53 said:
I have a Unisoc UMS512 chipset device.
I can't unlock bootloader.
I do this link : https://forum.hovatek.com/thread-32287.html
But I take this error.
"
downloading 'unlock_message'...
OKAY [ 0.001s]
unlocking bootloader...
FAILED (remote: Unlock bootloader fail.)
finished. total time: 0.101s
"
What should I do ?
Please help me, Thanks
(Sorry my bad english)
View attachment 5516217
View attachment 5516219
Click to expand...
Click to collapse
try out my post to see if it helps
Alldocube T803 Smile_1 Bootloader unlock w/ Unisoc T310
All files can be downloaded from the iplay40 tread. MUST use iPlay40 fastboot version or else it will fail using commands. Download install SpreadTrumTools-20200317.apk run command -- adb shell getprop ro.serialno Enter the serial you get from...
forum.xda-developers.com
Thread is up
I have same issue when I try to unlock bootloader of Infinix hot 11 unisoc t610 processor phone ..
Can someone help me out with this...
srinidroid said:
I have same issue when I try to unlock bootloader of Infinix hot 11 unisoc t610 processor phone ..
Can someone help me out with this...
Click to expand...
Click to collapse
I also have this device, did you find anything new aboutt unlocking?
jovisense said:
I also have this device, did you find anything new aboutt unlocking?
Click to expand...
Click to collapse
No :/
BASKAN53 said:
No :/
Click to expand...
Click to collapse
Hm i noticed that the icons on status bar is very close to edge, do u know any workaround?
BASKAN53 said:
UP UP UP. I need a help
Click to expand...
Click to collapse
Robyn_232 said:
I have unlocked my Motorola G20 with Unisoc T700 chipset with fastboot easily - without signature.bin. Then I had to follow instructions on the device to unlock. Try another USB 2.0 port and another cable too.
Click to expand...
Click to collapse
can you tell me pls how you have unlocked the bootloader of your unisoc without signature.bin?
By using fastboot.
fastboot flashing unlock_bootloader
I used this command:-
$ fastboot oem get_identifier_token
And got this in return:-
(bootloader) Identifier token:
(bootloader) 30303231364437303141323630393233
(bootloader) 313041413031424e
OKAY [ 0.022s]
Finished. Total time: 0.023s
What should I do next?
at next forget about what you have done and type: fastboot flashing unlock_bootloader
this is how i did it...
Robyn_232 said:
at next forget about what you have done and type: fastboot flashing unlock_bootloader
this is how i did it...
Click to expand...
Click to collapse
tried that didn't work
enable oem unlocking in developer settings
Robyn_232 said:
enable oem unlocking in developer settings
Click to expand...
Click to collapse
Don't you think I did it?
Got the same problem, seems like private key not working anymore for new devices
vanelizarov said:
Got the same problem, seems like private key not working anymore for new devices
Click to expand...
Click to collapse
What did you try?

Categories

Resources