I just bought a redmi 6a china rom device. It has the miui 9.6 china stable rom installed on it. I went to check for update it says no update available. Then i downloaded the stable china miui 10 and went to flash through recovery and it gives me a error like "Can't verify update. Rom is still in beta" although i downloaded the stable version twice. What do i do now?
same issue :/
fckmaik said:
same issue :/
Click to expand...
Click to collapse
Found any solution yet?
sushmoyhossain said:
Found any solution yet?
Click to expand...
Click to collapse
I saw this guide in MIUI Forum and works for me
https://en.miui.com/thread-3392184-4-1.html
fckmaik said:
I saw this guide in MIUI Forum and works for me
https://en.miui.com/thread-3392184-4-1.html
Click to expand...
Click to collapse
What did u do exactly? I didn't understand
sushmoyhossain said:
What did u do exactly? I didn't understand
Click to expand...
Click to collapse
I was talking about this post below
If you have the Global Version of Redmi 6A Download Global recovery rom, else try to find chine recovery rom for the China Version
Download Global recovery rom --->
http://en.miui.com/download-349.html#541
Donwload Mi Flash Pro --->
https://xiaomifirmware.com/downloads/miflashpro/
and install it.
Boot on recovery mode > mi assistance
Run Mi Flash Pro and wait to identifind the phone
From Mi Flash Pro tool > Select Recovery
and wait to identifind the phone (IMEI numbers)
Go at the 3 dots and select the recovery rom
Start flash
I hope the problem is solved
Original sollution ---> https://xiaomi-miui.gr/community ... D=660588#post660588
fckmaik said:
I was talking about this post below
If you have the Global Version of Redmi 6A Download Global recovery rom, else try to find chine recovery rom for the China Version
Download Global recovery rom --->
http://en.miui.com/download-349.html#541
Donwload Mi Flash Pro --->
https://xiaomifirmware.com/downloads/miflashpro/
and install it.
Boot on recovery mode > mi assistance
Run Mi Flash Pro and wait to identifind the phone
From Mi Flash Pro tool > Select Recovery
and wait to identifind the phone (IMEI numbers)
Go at the 3 dots and select the recovery rom
Start flash
I hope the problem is solved
Original sollution ---> https://xiaomi-miui.gr/community ... D=660588#post660588
Click to expand...
Click to collapse
Well i tried and it still says the same
Yesterday I got the same message for MIUI 10.0.12 global and I didn't want to upgrade just yet but this morning it showed message "the system updated automatically" and now its running MIUI 10 instead of 9.6 global, so far no problems whatsoever.
I have also bought Chinese version and it gets miui 10 update after following day... Now can i flash global stable version after unlocking the bootloader using mi flash tools? Anyone did that? Does it work?
Rj.tri said:
I have also bought Chinese version and it gets miui 10 update after following day... Now can i flash global stable version after unlocking the bootloader using mi flash tools? Anyone did that? Does it work?
Click to expand...
Click to collapse
Yeah i also got the update now. But i'm also thinking to flash global rom and I'm afraid. Lemme know if u or anyone has done that succesfully
sushmoyhossain said:
Yeah i also got the update now. But i'm also thinking to flash global rom and I'm afraid. Lemme know if u or anyone has done that succesfully
Click to expand...
Click to collapse
I search a lot.....but did not fine any concrete prove ......have to try by myself
Rj.tri said:
I search a lot.....but did not fine any concrete prove ......have to try by myself
Click to expand...
Click to collapse
Lemme know after you try. I'm waiting for your review
But be carefull with every step
My wife recently had an update automatically.
Related
After waiting 2 weeks i unlocked via official method and their unlock app then installed aosp-5.1.1-prerooted-v4.zip now i want to install
"kenzo_images_6.5.5_20160419.0000.19_5.1_cn_b32f7105dd" (chinese Dev ) Rom but everytime i try via MiFlash tool
Unspecified error (0x80004005 error: cannot load D:\123\images\sbl1.mbn' :No error
but when i try to flash Global Stable fastboot rom via MiFlash tool its able to flash with no problem
kindly help
A bit off topic but please tell us that how you managed to unlock bootloader officially via MI Flash Tool....
I have tried it many times and it stops at 50% saying that account is different on device and unlock tool...
KiranP23 said:
After waiting 2 weeks i unlocked via official method and their unlock app then installed aosp-5.1.1-prerooted-v4.zip now i want to install
"kenzo_images_6.5.5_20160419.0000.19_5.1_cn_b32f7105dd" (chinese Dev ) Rom but everytime i try via MiFlash tool
Unspecified error (0x80004005 error: cannot load D:\123\images\sbl1.mbn' :No error
but when i try to flash Global Stable fastboot rom via MiFlash tool its able to flash with no problem
kindly help
Click to expand...
Click to collapse
flash the euro rom instead , its based off the chinese minus the chinese crap , installs directly via TWRP , here
http://xiaomi.eu/community/threads/6-5-5.31436/
ayush321 said:
A bit off topic but please tell us that how you managed to unlock bootloader officially via MI Flash Tool....
I have tried it many times and it stops at 50% saying that account is different on device and unlock tool...
Click to expand...
Click to collapse
had same issue , but after trying everyday on 18th day it worked, guess their system is slow in updating
cletusarrarr said:
flash the euro rom instead , its based off the chinese minus the chinese crap , installs directly via TWRP , here
http://xiaomi.eu/community/threads/6-5-5.31436/
Click to expand...
Click to collapse
i would still like to use official chinese Dev Rom , previously when i using MI3 i didnt have issue when flashing Global or Chinese Dev/Stable rom
can anyone help me flash Chinese Dev Rom , ty
KiranP23 said:
i would still like to use official chinese Dev Rom , previously when i using MI3 i didnt have issue when flashing Global or Chinese Dev/Stable rom
can anyone help me flash Chinese Dev Rom , ty
Click to expand...
Click to collapse
Hey you can only flash stable build via mi flash tool so in order to flash china developer rom you first need to flash stable china build than you can use updater app to flash china developer rom
hasan05 said:
Hey you can only flash stable build via mi flash tool so in order to flash china developer rom you first need to flash stable china build than you can use updater app to flash china developer rom
Click to expand...
Click to collapse
no, you can flash china dev directly from mi flash tool.
cletusarrarr said:
no, you can flash china dev directly from mi flash tool.
Click to expand...
Click to collapse
Are you sure because i asked same question on miui forum some device team member told me that you can only use mi flash tool to flash stable build. If you flash developer build using mi flash tool than the device will bootloop
hasan05 said:
Are you sure because i asked same question on miui forum some device team member told me that you can only use mi flash tool to flash stable build. If you flash developer build using mi flash tool than the device will bootloop
Click to expand...
Click to collapse
yup i did it myself, use the tgz file tho i.e. fastboot rom
i've this rom on my redmi3 bougth from MI-Italia.
It worked fine from June until a few days ago when it starts automatically browser with strange pages of download or porno. If I press Home it works well, but after pages come back.
So I would install a good rom.
I've not yet requested unblock to xiaomi (how can i do it?) and i've seen some guide to install a global rom with italian.
But I'm afraid to make mistakes cause in this time i need phone, so i'm searching any other way to resolve issue.
If I make backup, then factory reset, then restore to my backup, maybe issue would be resolved?
Any other suggest?
thanks
cincin27 said:
You can install official Xiaomi Global rom with MiFlash. 77.1 rom is sellers modified rom, I recommend change it as fast as you can. Have you got Redmi 3 on Android 5.1? If yes download first rom.
.......
You only have to install rom in download rom, not in fastboot rom, becouse you have locked bootloader.
Click to expand...
Click to collapse
yes i've 5.1
i the guide you linked there's fastboot rom: what have i to do to install in download rom as you say? i don't understand
thanks
cincin27 said:
So download fastboot rom: ...cut...
And flash it via MiFlash in Download mode.
Click to expand...
Click to collapse
if i would a rom with italian language?
thanks
Hi, i cant flash it via fastboot because my bootloader is locked, and i cant open bootloader, because i need developer rom to do it (i have stable rom).
Any ideas?
Solved, thanks a lot
Hello guys,
Recently i updated my note 4 sd to global stable 8.2.10.0 but after that when i try to flash developer rom using uodater app it showed cant verify update error. I am using 7.2.16 developer rom, tried many times every time it says cant verify update install latest developer ver from miui stable only.
Any solution?
Thanks in advance.
mr.badman said:
Hello guys,
Recently i updated my note 4 sd to global stable 8.2.10.0 but after that when i try to flash developer rom using uodater app it showed cant verify update error. I am using 7.2.16 developer rom, tried many times every time it says cant verify update install latest developer ver from miui stable only.
Any solution?
Thanks in advance.
Click to expand...
Click to collapse
I had a similar issue with my Note 4 SD Global. I was on Global Stable 8.2.10.0 out of the box.
How I solved it...
Download the latest Developer Rom from HERE and make sure you transfer it to the DOWNLOAD folder on the phone.
It should now verify and install the Developer Rom. :good:
ASL3312 said:
I had a similar issue with my Note 4 SD Global. I was on Global Stable 8.2.10.0 out of the box.
How I solved it...
Download the latest Developer Rom from HERE and make sure you transfer it to the DOWNLOAD folder on the phone.
It should now verify and install the Developer Rom. :good:
Click to expand...
Click to collapse
Thats what i was thinking, on previous versions updating to 7.2.16 works as i did on my note 4, but as you are saying updating to latest version ia working. Will try and update.
i also faced the same issue with my Redmi Note 4 SD, when I tried upgrading to global developer rom and first time when i selected the zip, it worked fine but gave warning that all my data will be deleted so I stopped the update to back up data. And when i tried to start update again from the updater app, it is giving me the same message: "Can't verify update package" error.
Anyone who can help?
ASL3312 said:
I had a similar issue with my Note 4 SD Global. I was on Global Stable 8.2.10.0 out of the box.
How I solved it...
Download the latest Developer Rom from HERE and make sure you transfer it to the DOWNLOAD folder on the phone.
It should now verify and install the Developer Rom. :good:
Click to expand...
Click to collapse
Worked like a charm. Thanks bro.
gr8techie said:
i also faced the same issue with my Redmi Note 4 SD, when I tried upgrading to global developer rom and first time when i selected the zip, it worked fine but gave warning that all my data will be deleted so I stopped the update to back up data. And when i tried to start update again from the updater app, it is giving me the same message: "Can't verify update package" error.
Anyone who can help?
Click to expand...
Click to collapse
Download again it will work for sure. One time downloaded file can only be used one time. Because the updater app is very sensitive.
mr.badman said:
Worked like a charm. Thanks bro.
Download again it will work for sure. One time downloaded file can only be used one time. Because the updater app is very sensitive.
Click to expand...
Click to collapse
thanks man! even though the file got decrypted after trying many times.
i successfully upgraded to developer ROM using the same file. So, the problem could be with Xiaomi servers.
It didn't work.
mr.badman said:
Thats what i was thinking, on previous versions updating to 7.2.16 works as i did on my note 4, but as you are saying updating to latest version ia working. Will try and update.
Click to expand...
Click to collapse
My current version is 8.2.2.0 and trying to update to 8.2.10.0 I saved the downloaded file to DOWNLOAD folder and tried manual update but after decryption and reboot it's showing "try downloading full ROM". Please help.
mr.badman said:
Hello guys,
Recently i updated my note 4 sd to global stable 8.2.10.0 but after that when i try to flash developer rom using uodater app it showed cant verify update error. I am using 7.2.16 developer rom, tried many times every time it says cant verify update install latest developer ver from miui stable only.
Any solution?
Thanks in advance.
Click to expand...
Click to collapse
Once you decrypt the update package and if it didn't install you cannot share it or install it again through MIUI updater or TWRP you will have to download it again
hi,
im using redmi note 4 and the miui version is miui global 8.2/stable 8.2.2.0(MCFMIDL) now it shows a update to MIUI V8.2.10.0.MCFMIDL/stable/1.5G the problem is that i downloaded it full it start updating it fails and pops up a message that try to download full rom what should i do ,ithave donw this update 3 times but every time it show the same message plz help
When i want to update redmi note 4, at last its shows ROM Full, pls suggest
I am currently running MIUI 10 China Stable and have a locked bootloader, I would like to install the official China Developer ROM, does anybody know how I should install it correctly?
well according to the information on MIUI forums you need an unlocked bootloader for the fastboot flash method.
https://en.miui.com/thread-4765806-1-1.html
Can't use local update to go from stable<>developer and vice versa.
You can just download the recovery rom from MIUI forum and use the updater option "Choose update package" to change to developer ROM without needing to unlock bootloader. The tablet however will need to be wiped upon flashing the new ROM.
I don't think there are any..
https://en.miui.com/thread-4765806-1-1.html
This is the latest China development rom
Right but then why would they state
Note: China Stable users, please upgrade via fastboot mode.
Click to expand...
Click to collapse
and
How to upgrade?
Check this tutorial: http://en.miui.com/a-232.html (China Beta users) and http://en.miui.com/a-234.html <<<==== Link to fastboot flash method (China Stable users)
Click to expand...
Click to collapse
Are they wrong ?
Stoffl_ said:
Right but then why would they state
and
Are they wrong ?
Click to expand...
Click to collapse
I guess it was apppicable to older MIUI rom versions. I've already done this on my locked Mi Pad 4 and also you can see it from this video.
https://youtu.be/FvmJvYxENr8
Interesting...thank you!
mercindustries said:
I guess it was apppicable to older MIUI rom versions. I've already done this on my locked Mi Pad 4 and also you can see it from this video.
Click to expand...
Click to collapse
I got to the developer ROM, but now I want to go back to the stable ROM and I don't know if I can because of anti rollback. The developer roms anti rollback status is 1, does anyone know what the stable roms is!
So after checking the Xiaomi firmware site (didn't work, flashing the weekly firmware just appeared as stable) I haven't been able to get the developer firmware.
Does anybody know where I can get a hold of it without the MIUI ROM.
(It's needed for the latest Pixel Experience update and it isn't included with the update)
Title is meant to say MIUI ROM not room, autocorrect sorry.
dudeisbrendan03 said:
So after checking the Xiaomi firmware site (didn't work, flashing the weekly firmware just appeared as stable) I haven't been able to get the developer firmware.
Does anybody know where I can get a hold of it without the MIUI ROM.
(It's needed for the latest Pixel Experience update and it isn't included with the update)
Title is meant to say MIUI ROM not room, autocorrect sorry.
Click to expand...
Click to collapse
Always go here for latest vendor firmwares
https://mirror.akhilnarang.me/MIUI/beryllium/
and never use beryllium-V10.1.3.0-9.0-vendor-firmware.zip - this is an older version, even though the version number is higher than 9.
jackiass said:
and never use beryllium-V10.1.3.0-9.0-vendor-firmware.zip - this is an older version, even though the version number is higher than 9.
Click to expand...
Click to collapse
Whats going to happen if i flash the latest 9.2.25 vendor fw on global stable 10.2.2.0???
I get the same message when I want to install the ROM. I'm stuck and don't know what to do? Has anyone any tips to succesfully install the Pixel Experience ROM on a Pocophone?
DFlower said:
I get the same message when I want to install the ROM. I'm stuck and don't know what to do? Has anyone any tips to succesfully install the Pixel Experience ROM on a Pocophone?
Click to expand...
Click to collapse
Have you tried doing the above steps mentioned??
I mean..
Download and install via twrp the latest vendor firmware ,, about 400mb in size..
Then flash fde... Then flash the PE rom???
santiagoruel13 said:
Have you tried doing the above steps mentioned??
I mean..
Download and install via twrp the latest vendor firmware ,, about 400mb in size..
Then flash fde... Then flash the PE rom???
Click to expand...
Click to collapse
Thanks for your help, I used the wrong firmware version. I now used this file/version ->beryllium-9.2.25-9.0-vendor-firmware.zip and this worked fine !
From the link you mentioned -> https://mirror.akhilnarang.me/MIUI/beryllium/
DFlower said:
Thanks for your help, I used the wrong firmware version. I now used this file/version ->beryllium-9.2.25-9.0-vendor-firmware.zip and this worked fine !
From the link you mentioned ->
Click to expand...
Click to collapse
cva_kabil said:
Always go here for latest vendor firmwares
Click to expand...
Click to collapse
Is this dev or stable firmware?
dudeisbrendan03 said:
Is this dev or stable firmware?
Click to expand...
Click to collapse
Dev. That's why you need it even though you are coming from the latest official miui.
How to get a phone mi mix3