Hi all people,
first of all, I want excuse me for not my perfect English.
I have Honor 9 from few days. And I think to have bricked it.
I have unlocked bootloader correctly.
I have flashed recovery this TWRP recovery with the intention to proceed to root with Magisk or SuperSu. I accidentally and unconsiuosly do factory reset then the phone goes bootloop. (it power off and power on continuously) with the alert "your device has been unlocked and..etc".
Yesterday, reading this thread, I flashed, from fastboot console, boot, recovery and system, the phone resets two/three times then goes to eRecovery where I do a factory reset.
After a factory reset the phone works correctly and seems successfully unbricked. So I re-flash TWRP recovery.
But this morning, during the attempt to install from TWRP one between Magisk or SuperSu (I don't succeed to do it beacuse the phone was crypted and I don't see zip files from TWRP). I have reset the phone but goes bootloop again.
I tried to re-flash boot, recovery, system and cust more (that I don't have flashed yesterday). Now the phone goes eRecovery and ask me to connect to download latest version and recovery, but don't ask me to do a factory reset.
Now I don't know what I can do.
How I can solve this situation? I want only unlock bootloader (done!), install TWRP and have root permission. Now I don't think to change rom.
Something similar happened to me. It seems like the TWRP provided has some issue..... After installing TWRP I had a bootloop problem. I have resolved installing Magisk. It seems that Magisk patchs something. If you can access TWRP try to install Magisk (put the zip file on external sd). In other words: copy magisk zip on sd card - during the bootloop you have the chance to power off phone - Power off - Power on in recovery mode. If you have TWRP correctly installed Honor should go in recovery using TWRP . Install Magisk and see what happens...
unvisigoth said:
Something similar happened to me. It seems like the TWRP provided has some issue..... After installing TWRP I had a bootloop problem. I have resolved installing Magisk. It seems that Magisk patchs something. If you can access TWRP try to install Magisk (put the zip file on external sd). In other words: copy magisk zip on sd card - during the bootloop you have the chance to power off phone - Power off - Power on in recovery mode. If you have TWRP correctly installed Honor should go in recovery using TWRP . Install Magisk and see what happens...
Click to expand...
Click to collapse
I have tried to flash TWRP recovery again to do install Magisk from sd card. I have done it but the phone doesn't work fine.
So I have put rommco05 TWRP Backup into sd card then restored it from TWRP restore (boot and vendor img). Now the phone seems have bootloader locked, in fact I don't have bootloader warning at the power on. Now in fastboot mode the phone says me that I have Phone locked and FRP unlocked.
How can I exit from this situation?
Try this
Killus3 said:
Hi all people,
first of all, I want excuse me for not my perfect English.
I have Honor 9 from few days. And I think to have bricked it.
I have unlocked bootloader correctly.
I have flashed recovery this TWRP recovery with the intention to proceed to root with Magisk or SuperSu. I accidentally and unconsiuosly do factory reset then the phone goes bootloop. (it power off and power on continuously) with the alert "your device has been unlocked and..etc".
Yesterday, reading this thread, I flashed, from fastboot console, boot, recovery and system, the phone resets two/three times then goes to eRecovery where I do a factory reset.
After a factory reset the phone works correctly and seems successfully unbricked. So I re-flash TWRP recovery.
But this morning, during the attempt to install from TWRP one between Magisk or SuperSu (I don't succeed to do it beacuse the phone was crypted and I don't see zip files from TWRP). I have reset the phone but goes bootloop again.
I tried to re-flash boot, recovery, system and cust more (that I don't have flashed yesterday). Now the phone goes eRecovery and ask me to connect to download latest version and recovery, but don't ask me to do a factory reset.
Now I don't know what I can do.
How I can solve this situation? I want only unlock bootloader (done!), install TWRP and have root permission. Now I don't think to change rom.
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-9/help/bootloader-locked-help-to-enable-usb-t3683145
Rommco05 said:
Again unlock bootloader
Click to expand...
Click to collapse
I have unlocked bootloader again and do a factory reset from TWRP recovery, now the phone seems works correctly!!!:good:
Now I should try to root the phone with Magisk or SuperSu, right?
I have a question about TWRP. From TWRP's file manager I don't see the files that I put in the internal memory. It's because I have used finger print to lock the phone that encryptes files?
raw_jay said:
https://forum.xda-developers.com/honor-9/help/bootloader-locked-help-to-enable-usb-t3683145
Click to expand...
Click to collapse
This is to re-brand the phone from Chinese to EU version...I don't think is my case.
Rommco05 said:
Take a backup before make root. You don't see files because is some issue with decryption in TWRP. I achieved root with Magisk but I don't remember exactly steps
Click to expand...
Click to collapse
I think it's too late
Anyway I can re-flash all thing from begin.
Then I can't use TWRP with the phone encrypted ( PIN, password, fingerprint, etc...) ?
Rommco05 said:
I'm not sure about thatz Huawei roms are encrypted somehow by default
Click to expand...
Click to collapse
After I have installed Magisk (v14.0) now I have problem with google play services which don't download and do updates apps.
If I do a factory reset again I can solve it?
Update:
After I done a factory reset from TWRP recovery
and formatting data partition the phone seems working perfectly (I don't know why, but before format data the phone says me that I have only 150mb of memory space)
I say "seems" because there's something getting me in trouble, for example, I don't have anymore ringtones in the settings menu.
And I don't know if I have lost something else.
Exists a possibilty to restore all contents of the phone?
You could try this and flash your phone back to stock. But then you would need to unlock your bootloader and install TWRP again. Another way would be to unpack an image of your ROM and flash system and other parts via fastboot. Of course this could be risky and you could brick the device.
Meranico said:
You could try this and flash your phone back to stock. But then you would need to unlock your bootloader and install TWRP again. Another way would be to unpack an image of your ROM and flash system and other parts via fastboot. Of course this could be risky and you could brick the device.
Click to expand...
Click to collapse
If I understand it well...
I have 2 options:
1) Rebrand the phone and flashin, then at end I have back the phone stock.
2) Unpack the image of ROM (what it means?) and flash system and other parts via fastboot. (Which are those parts? How?) But this procedure is more hazardous then rebrand procedure?
I have understand right?
1. Yes, correct. I would recommend that. Everything is explained in the thread I linked. Of course everything you do could potentially harm your phone, but you should know that already.
2. Get an update.app file for your specific phone model (there are threads already here, just search a bit, or use Firmware Finder), open it with the Huawei Update Extractor and extract the parts you want to flash (like system or recovery). Then flash them via fastboot. I tried this because I was in a situation like yours, but it didn't work for me. But in theory it could, because you would replace the faulty parts of your firmware.
Killus3 said:
I have understand right?
Click to expand...
Click to collapse
Could you solve your problem?
Meranico said:
Could you solve your problem?
Click to expand...
Click to collapse
Hi, I don't say it because I have replaced the phone with another same.
Now I'm starting to unlock bootloader, installing recovery TWRP and rooting the phone.
I hope to avoid bootloop this time.
Goodmorning everyone!
Yesterday I have:
- Unlocked bootloader correctly!
- Installed TWRP correctly!
- Make a TWRP Backup of all partitions of the device, except data partition because TWRP gives me an error during backup attempt.
- Then I start the device.
- After start the device I go to recovery TWRP to install Magisk, but the phone goes bootloop.
After reboot 2-3 times on the screen appears for a few moments a message of eRecovery that have restored something but I don't know. Then the device shows me the eRecovery that asks me to make a factory reset.
At this point I shutdown the device, go in TWRP to flash Magisk unistaller and the device goes out bootloop and works fine but without root.
How I can solve this problem and install Magisk and have root finally?
Some question:
-When I flashed TWRP (via fastboot) and I configurate it, example language, hours, etc... TWRP don't save the settings, in fact when I go in TWRP again I do remake the settings. Why?
-Then I go in sdcard I don't navigate files, I see folders with casual characters. This is an effect of encryption of the device?
Killus3 said:
Goodmorning everyone!
Yesterday I have:
- Unlocked bootloader correctly!
- Installed TWRP correctly!
- Make a TWRP Backup of all partitions of the device, except data partition because TWRP gives me an error during backup attempt.
- Then I start the device.
- After start the device I go to recovery TWRP to install Magisk, but the phone goes bootloop.
After reboot 2-3 times on the screen appears for a few moments a message of eRecovery that have restored something but I don't know. Then the device shows me the eRecovery that asks me to make a factory reset.
At this point I shutdown the device, go in TWRP to flash Magisk unistaller and the device goes out bootloop and works fine but without root.
How I can solve this problem and install Magisk and have root finally?
Some question:
-When I flashed TWRP (via fastboot) and I configurate it, example language, hours, etc... TWRP don't save the settings, in fact when I go in TWRP again I do remake the settings. Why?
-Then I go in sdcard I don't navigate files, I see folders with casual characters. This is an effect of encryption of the device?
Click to expand...
Click to collapse
Answers to all your concerns go here mate---> TWRP doesn't decrypt data. Done.
Hence: weird folders in there, nowhere to store its settings prefs, about Magisk it's another story, if you want root go SuperSU latest beta.
Regards.
a basically did what that guy did, got root installed via TWRP but my google apps are all busted.
I tried flashing the update_data_full_public.zip and update_full_hw_usa.zip I found using the russian device lookup link switching trick but I the HW errored when I tried to flash it in TWRP and my play store still broken.
I want to root my poco f1 ....
But i have some questions regarding it
1. Will my data be format while rooting and installing twrp
2. How i will get ota update
3. Will installing ota update also format my data?
1. Your whole internal data needs to be wiped... To flash the force decryption enabler at first...
Even while installing twrp via fastboot.. Your data will be formated
2. You will get updates... But not via ota.... Yes you will get to download the updateds in some roms... But you need to dirty flash them.
3. While dirty flashing.... Formatting data is not required.
roxor101 said:
1. Your whole internal data needs to be wiped... To flash the force decryption enabler at first...
Even while installing twrp via fastboot.. Your data will be formated
2. You will get updates... But not via ota.... Yes you will get to download the updateds in some roms... But you need to dirty flash them.
3. While dirty flashing.... Formatting data is not required.
Click to expand...
Click to collapse
Does the twrp with working decryption also need to format my data?
You can root your device in two ways.
First, with twrp (OTA won't work afterwards)
Second, without twrp (OTA will work)
First method, unlock the bootloader (device will be wiped)>Grab the twrp with working decryption>Boot your device into fastboot and type fastboot flash recovery twrp.img (or whatever the recovery image name is)>Now type fastboot boot twrp.img (or whatever the recovery image name is)>Once booted into twrp, swipe to allow modification>Now download Magisk installer and copy into the device>Flash it?Reboot to system>Profit.
N.B. After flashing twrp, make sure to first boot into twrp before booting into system or else device will restore stock recovery. If you need to update in future, just grab the twrp flashable update package and flash it. That's it. No need for OTA.
Second method, this will also require an unlocked bootloader. Once the bootloader is unlocked, get the stock boot image of your current software (e.g. if you are on miui 10 with October security patch, make sure to grab the stock boot image for miui 10 october). Now install Magisk manager apk in your device. Now open magisk manager and go to install. You will find an option for patching stock boot image. Click on it and select the stock boot image. Magisk will patch the boot image and will place it in your internal memory. Now boot into fastboot mode and type fastboot boot patched_boot.img (or whatever the name is). Once device is booted into system, go to Magisk and click on Install>Direct install (recommended).Magisk will get flashed by itself and reboot. Once rebooted, go to Magisk manager and check. If you do everything correctly, you are rooted.
N.B. When you get an OTA update, open Magisk and go to Unsinatll and click on "Complete uninstall". It will uninstall magisk and revert your stock boot image back. Note that, if you play witgh system partition like modifying build.prop or change host file or bootanimantion or any such thing, you won't be able to get any further OTA update. In that case, you need to flash the complete fastboot rom through MiFlash tool.
For more information, please go to Magisk thread or search online.
Hi,
I have successfully flashed magisk_patched_boot.img and TWRP but when I enter in TWRP using adb reboot recovery then it asks for the password and whichever I enter password it says Unable to decrypt data. Can anyone please help how can I flash SuperSu in TWRP which says this error?
Firstly, why don't you just use magisk, using SuperSu seems dumb, since, it can't offer systemless customisations, I recommend you to restore your phone to the original state, lock the bootloader of you unlocked it, and, patch the boot image of the device and flash it using so flash tools... Also, using sp flash tools you can keep your bootloader locked and still be able to use magisk and other customisations, also, I need a nvram partition backup, since, I fully erased my device age now my imei is gone, just take a backup of the nvram and send it to me, I will edit the info for my device and flash it myself...
Hi. I installed Android 12 Pixel Experience rom and my TWRP gone after this. After installing the rom, TWRP replaced with Pixel Experience's own recovery mode. Currently, the ROM is installed and I can use it without any problems, but I cannot switch to a different ROM in any way. When I install TWRP with ADB, I cannot install the file named "DM Verity & ForceEncrypt disabler" because everything is encrypted. I do not use any passwords on the ROM (fingerprint, screen lock, etc.). I want to install new ROM so I need to make TWRP permanent and remove encryption on TWRP, because i can't see my files. As I said, the phone is can open and I can use it without problems. Looking forward to your help, thank you.
1) Backup everything
2) Install twrp and sideload the PE rom but don't boot into it
3) Flash the DFE (disable force encryption ) zip from twrp
4) Boot into the rom
Remember you won't get the ota updates if you disable the encryption and have to manually update the rom
easdasd617 said:
Hi. I installed Android 12 Pixel Experience rom and my TWRP gone after this. After installing the rom, TWRP replaced with Pixel Experience's own recovery mode. Currently, the ROM is installed and I can use it without any problems, but I cannot switch to a different ROM in any way. When I install TWRP with ADB, I cannot install the file named "DM Verity & ForceEncrypt disabler" because everything is encrypted. I do not use any passwords on the ROM (fingerprint, screen lock, etc.). I want to install new ROM so I need to make TWRP permanent and remove encryption on TWRP, because i can't see my files. As I said, the phone is can open and I can use it without problems. Looking forward to your help, thank you.
Click to expand...
Click to collapse
You need to read the instructions before you flash anything. PE A12 is encrypted by default and because TWRP can't handle the decryption of A12 ROMs, PE replacing the TWRP with PE Recovery, so to be able to get OTA updates. This is a workaround until TWRP fix the decryption issue.
To flash another ROM, take backup of the files you want from your Internal Storage, flash TWRP via ADB, wipe everything and format data. Then connect your device to PC and transfer the ROM and the files you want to flash into your Internal Storage and proceed with flashing.