Hi Guys Im using a SM-G965N in the UK, when I try to register for the Pie Beta it give me the message "Your sim card doenst match the service provider software on your phone. This is common if you've changed service providers or if your phone and SIM card are from different country's" Im using the 3 network in the UK and the phone is LGu... Anyone have any work around..?
Anyone? I have exactly same problem. I got sm-g965n with LG Uplus carrier living in other country. Can i just flask stock firmware in my region to get rid of all the bloats and also is there a way for me to participate in pie beta? I can also swap this one with carrier unlocked SD845 version. Can i flash US stock on that one also?
Hi guys, I'm running into a similar issue with G965F device in Canada.
Here's what I've been able to piece together. Each device is a hardware variant and can use a specific set of firmware variants (sometimes called Multi-CSC). Your hardware variant is G965N. And if you look at sammobile for hardware variant, you can see the set of firmware available for this specific device. Unfortunately for you, there is ONLY Korean firmware for this hardware variant. For me, I have many more options but still no Canada!
It it completely inadvisable to flash the firmware onto your device that is not specifically tailored to your hardware. It's especially stupid when the firmware is tailored for an entirely different chipset (for example, Exynos firmware for Snapdragon hardware). But even if the devices use the same chipset, there may exist other hardware differences that will cause instability/errors/ bricks/unknown.
So as far as I can tell, we're all screwed. Have a nice day
Great news. I got into Pie Beta with my g965n. I was about to change my phone when i found LG Uplus sim card in my country. I put the sim card in and was able to register and download OTA. Now i am on android pie.
Nomado said:
Great news. I got into Pie Beta with my g965n. I was about to change my phone when i found LG Uplus sim card in my country. I put the sim card in and was able to register and download OTA. Now i am on android pie.
Click to expand...
Click to collapse
Send me the sim card.....PLEASE !!!! or tell me where you got it..
damonsk14 said:
Send me the sim card.....PLEASE !!!! or tell me where you got it..
Click to expand...
Click to collapse
I found it almost by luck. I was at this phone store when i randomly asked from a lady selling smart phones whether she had Lg Uplus sim card or not and she said yeah i got few. You can have one. That is how i found one. I wouldn't be able to ship it outside country without reliable shipping service in my country.
damonsk14 said:
Hi Guys Im using a SM-G965N in the UK, when I try to register for the Pie Beta it give me the message "Your sim card doenst match the service provider software on your phone. This is common if you've changed service providers or if your phone and SIM card are from different country's" Im using the 3 network in the UK and the phone is LGu... Anyone have any work around..?
Click to expand...
Click to collapse
Ran in to the same issue. Flashing in a Custom ROM helped.
https://forum.xda-developers.com/showpost.php?p=81856129&postcount=2150
Gamaka said:
Ran in to the same issue. Flashing in a Custom ROM helped.
https://forum.xda-developers.com/showpost.php?p=81856129&postcount=2150
Click to expand...
Click to collapse
which one custom rom did you flash ?
Graphite` said:
which one custom rom did you flash ?
Click to expand...
Click to collapse
Visit
https://androidfilehost.com/?w=files&flid=257743
Use SM-G965N files
Related
Hello,
i use the software XperiFirm to download firmwares for my Z5C.
I live in Austria but there are only three providers in the list from Austria.
I have a phone without any branding and i don't know which one i should use because i am not a user of any of this providers.
Is it possible to use for example the T-Mobile firmware even if i don't have a T-Mobile Sim Card?
And is it also possible to use a Firmware from another country?
Best regards
Zillinda
Zillinda said:
Hello,
i use the software XperiFirm to download firmwares for my Z5C.
I live in Austria but there are only three providers in the list from Austria.
I have a phone without any branding and i don't know which one i should use because i am not a user of any of this providers.
Is it possible to use for example the T-Mobile firmware even if i don't have a T-Mobile Sim Card?
And is it also possible to use a Firmware from another country?
Best regards
Zillinda
Click to expand...
Click to collapse
there might be problem with sim card if you flash USA roms cause they more restriction & ...
but other than that you flash any official firmware with same android version.
:good:
Normally you can use any version for E5823.
The difference between the austrian roms are that providers pack some of their apps into the rom( like "a1 apps" or "mein a1" for example. If you want a rom without provider apps you can use the customized de version for germamy for example.
However you could of course run into a little problem by using a rom from another country that i had myself.
From what you said, i assume you are neither using a1, t-mobile nor drei as your provider. All of the other providers in austria like bob, hot or upc are using the network infrastructure of one of the those 3 big providers by national roaming.
However his could result in you to have allow roaming all the time to use mobile data. Could cause costs if you live near the boarder or if you forget to turn of when you leave country.
I had this problem with the customized de firmware for germany with which i got my device. My provider "Ge org" wasn't recognized correctly. After flashing the A1 firmware( Ge org is using A1 network) all works properly.
Gewiz said:
Normally you can use any version for E5823.
The difference between the austrian roms are that providers pack some of their apps into the rom( like "a1 apps" or "mein a1" for example. If you want a rom without provider apps you can use the customized de version for germamy for example.
However you could of course run into a little problem by using a rom from another country that i had myself.
From what you said, i assume you are neither using a1, t-mobile nor drei as your provider. All of the other providers in austria like bob, hot or upc are using the network infrastructure of one of the those 3 big providers by national roaming.
However his could result in you to have allow roaming all the time to use mobile data. Could cause costs if you live near the boarder or if you forget to turn of when you leave country.
I had this problem with the customized de firmware for germany with which i got my device. My provider "Ge org" wasn't recognized correctly. After flashing the A1 firmware( Ge org is using A1 network) all works properly.
Click to expand...
Click to collapse
Hello, thanks for your answer.
My provider is HoT and it's using the infrastructure of T-Mobile. When i flash the T-Mobile Firmware do i still get the OTA updates and what about the warranty?
Zillinda said:
Hello, thanks for your answer.
My provider is HoT and it's using the infrastructure of T-Mobile. When i flash the T-Mobile Firmware do i still get the OTA updates and what about the warranty?
Click to expand...
Click to collapse
I also believe this should be the best choice for you.
If you stay unrooted you should have no problems with OTA updates. Warranty should be afaik no problem if you don't unlock your bootloader, which is not needed to install another stock rom. However i don't know for sure, cause i don't care much about warranty since i repair hardware issues on my devices by myself
Gewiz said:
I also believe this should be the best choice for you.
If you stay unrooted you should have no problems with OTA updates. Warranty should be afaik no problem if you don't unlock your bootloader, which is not needed to install another stock rom. However i don't know for sure, cause i don't care much about warranty since i repair hardware issues on my devices by myself
Click to expand...
Click to collapse
Do i have to reset my phone before flashing? I currently have a firmware without branding and i want to flash the one with the T-Mobile branding.
Is it possible to flash it without a reset?
Zillinda said:
Do i have to reset my phone before flashing? I currently have a firmware without branding and i want to flash the one with the T-Mobile branding.
Is it possible to flash it without a reset?
Click to expand...
Click to collapse
That's up to you.
A dirty flash should run and work properly. But a dirty flash (especially when your data and apps is the same as when you where using Android 6.0) can result in unexpected behavior:
- Crashing apps
- Wakelocks
- Battery drain
...
So it's always better to do a clean install when you upgrade to android 7.0
If you don't care about the possibility of instable behaviour or battery inefficiency, then a dirty flash (keeping your data/apps) will be much easier/faster.
I recently bought a Samsung Galaxy J8 from Australia because I lost my phone there. When I came home to India I found out that the Australian J8 does not support VoLTE (Voice over LTE) but I need VoLTE for my Indian sim card to work. So I went to the Samsung service center but they straight away denied any support since I bought this in another country.
The Indian varient J8 supports VoLTE but the Australian one does not even when both the phones have the exact same hardware. So its a software limitation.
Can anyone suggest any method I can use to install any custom ROM that'll support VoLTE.
I'm willing to install anything, root my phone or whatever it takes since I'm never gonna get any warranty on this. So I might as well try everything else.
Amritansu_Mitra said:
I recently bought a Samsung Galaxy J8 from Australia because I lost my phone there. When I came home to India I found out that the Australian J8 does not support VoLTE (Voice over LTE) but I need VoLTE for my Indian sim card to work. So I went to the Samsung service center but they straight away denied any support since I bought this in another country.
The Indian varient J8 supports VoLTE but the Australian one does not even when both the phones have the exact same hardware. So its a software limitation.
Can anyone suggest any method I can use to install any custom ROM that'll support VoLTE.
I'm willing to install anything, root my phone or whatever it takes since I'm never gonna get any warranty on this. So I might as well try everything else.
Click to expand...
Click to collapse
Just download Indian firmware from sammobile and flash via odin, that will contain latest modem for your device. It might bring VoLTE, because I think its software problem.
Bad.Wolf said:
Just download Indian firmware from sammobile and flash via odin, that will contain latest modem for your device. It might bring VoLTE, because I think its software problem.
Click to expand...
Click to collapse
I tried but it won't let me install any other model firmware. My phone's Model Number is SM-J810Y but the phones available in India have model number SM-J810G. So it won't let me install the "G" firmware. I get a failed message.
Do you have any other suggestion?
help
Hi, I wanted to change my ROM but I forgot the OEM. I am stuck with the FRP. Someone would have the U3 COMBINATION for the J810YDXU3BSE1
Please
I'm looking for the latest USA factory unlocked firmware for the Stylo 4 (KDZ file), does anyone know where I can find that? I have looked everywhere I can think of and everyone has carrier specific firmware, but not the one I am looking for.
The specific model is LMQ710ULM.AUSABK.
The IMEI is: 357183090498307
Try This
SpikeyPsyche said:
I'm looking for the latest USA factory unlocked firmware for the Stylo 4 (KDZ file), does anyone know where I can find that? I have looked everywhere I can think of and everyone has carrier specific firmware, but not the one I am looking for.
The specific model is LMQ710ULM.AUSABK.
The IMEI is: 357183090498307
Click to expand...
Click to collapse
Hi there,
I would like to know which specific carrier that your looking for.
Sincerely
KIBS2173
KIBS2173 said:
Hi there,
I would like to know which specific carrier that your looking for.
Sincerely
KIBS2173
Click to expand...
Click to collapse
It is the unlocked model sold directly by LG in the USA, so it is non-carrier firmware.
Try This
SpikeyPsyche said:
It is the unlocked model sold directly by LG in the USA, so it is non-carrier firmware.
Click to expand...
Click to collapse
Hi there,
You can try this website.
https://lg-firmwares.com/
or
https://lg-firmwares.com/lg-lmq710ulm-firmwares/#tab=firmwares
since your phone is network unlocked I think it might be safe to reinstall the firmware.
However, if you have your doubts feel free to search it online or ask LG directly.
Sincerely
KIBS2173
KIBS2173 said:
Hi there,
You can try this website.
https://lg-firmwares.com/
or
https://lg-firmwares.com/lg-lmq710ulm-firmwares/#tab=firmwares
since your phone is network unlocked I think it might be safe to reinstall the firmware.
However, if you have your doubts feel free to search it online or ask LG directly.
Sincerely
KIBS2173
Click to expand...
Click to collapse
Thank you. I found out that they never released the KDZ for the factory unlocked phones (region USA). So, the only way to update my phone would be to flash carrier firmware, which, is kinda risky, since it would technically be a crossflash. I would likely lose certain features, such as Wi-Fi calling and/or VoLTE. One of the few firmwares that supports wi-fi calling is the T-Mobile firmware, but I wouldn't flash that firmware because it is different than the hardware of my phone (their model has 2 GB of RAM, mine has 3 GB of RAM, etc...
Try This
SpikeyPsyche said:
Thank you. I found out that they never released the KDZ for the factory unlocked phones (region USA). So, the only way to update my phone would be to flash carrier firmware, which, is kinda risky, since it would technically be a crossflash. I would likely lose certain features, such as Wi-Fi calling and/or VoLTE. One of the few firmwares that supports wi-fi calling is the T-Mobile firmware, but I wouldn't flash that firmware because it is different than the hardware of my phone (their model has 2 GB of RAM, mine has 3 GB of RAM, etc...
Click to expand...
Click to collapse
Hi there,
Yes, while I was researching it online I found two firmware for this phone for the US region. But anyways have you tried using a PC suite from LG to reinstall the firmware. Or have you tried going on to the recovery mode and just reset the whole device. Or better try to install a custom ROM, to be honest I think it might be okay if you flashed a Europe region firmware, but make sure you back up the current firmware. I flashed a Samsung phone which was used to be locked and then I unlocked it after that I flashed the carrier firmware and it didnt carrier locked my phone. But anyways try your best.
Sincerely
KIBS2173
Hi. I want to flash a Brazilian firmware (dual SIM) into my US hardware (single SIM). Both are Snapdragon. Reason is that I want to use the Brazilian Samsung Pay. Bough the phone in the US but I live in Brazil.
Can I flash THIS ROM without problems? Will it trigger Knox? Any loss in functionality?
Thank you all.
gustavrsh said:
Hi. I want to flash a Brazilian firmware (dual SIM) into my US hardware (single SIM). Both are Snapdragon. Reason is that I want to use the Brazilian Samsung Pay. Bough the phone in the US but I live in Brazil.
Can I flash THIS ROM without problems? Will it trigger Knox? Any loss in functionality?
Thank you all.
Click to expand...
Click to collapse
no
gustavrsh said:
Hi. I want to flash a Brazilian firmware (dual SIM) into my US hardware (single SIM). Both are Snapdragon. Reason is that I want to use the Brazilian Samsung Pay. Bough the phone in the US but I live in Brazil.
Can I flash THIS ROM without problems? Will it trigger Knox? Any loss in functionality?
Thank you all.
Click to expand...
Click to collapse
not possible. also, is there not a CSC for your area you can flash instead?
I don't know why these guys say it's not possible, maybe it isn't with your model. I also don't want to give you any bad ideas or anything, so use your own discretion & research.
My phone was unusable when I did this, so I had nothing to lose when I did this (It worked though).
I easily flashed my canadian note 8 with a us firmware using modified odin (must be same version bootloader).
It has warranty status 0x0 (aka, Knox is NOT tripped).
AGAIN, I'm not advising you try this with your model, unless you know what you're doing. I just want to make the information available to you.
Edit: I'm just waiting for someone to upload snapdragon beta 3 one ui 2.0. I'm going to try the same method to convert my Canadian s9+ to USA version.
Edit 2: I can confirm this method works on my Canadian s9+ aswell.
Amb669 said:
I don't know why these guys say it's not possible, maybe it isn't with your model. I also don't want to give you any bad ideas or anything, so use your own discretion & research.
My phone was unusable when I did this, so I had nothing to lose when I did this (It worked though).
I easily flashed my canadian note 8 with a us firmware using modified odin (must be same version bootloader).
It has warranty status 0x0 (aka, Knox is NOT tripped).
AGAIN, I'm not advising you try this with your model, unless you know what you're doing. I just want to make the information available to you.
Edit: I'm just waiting for someone to upload snapdragon beta 3 one ui 2.0. I'm going to try the same method to convert my Canadian s9+ to USA version.
Edit 2: I can confirm this method works on my Canadian s9+ aswell.
Click to expand...
Click to collapse
Yeah I don't think it'll work on mine, since it's a single sim phone, and the ROM I wanted was for a dual sim version. Unless of course the hardware is the same and the second SIM slot is present. I could try, but I don't want to risk it. Maybe later when Sammy stops updating the phone.
Youdoofus said:
not possible. also, is there not a CSC for your area you can flash instead?
Click to expand...
Click to collapse
Unfortunately not. The SM-G965U1 is the US unlocked version. There are only CSCs for American carriers.
gustavrsh said:
Yeah I don't think it'll work on mine, since it's a single sim phone, and the ROM I wanted was for a dual sim version. Unless of course the hardware is the same and the second SIM slot is present. I could try, but I don't want to risk it. Maybe later when Sammy stops updating the phone.
Unfortunately not. The SM-G965U1 is the US unlocked version. There are only CSCs for American carriers.
Click to expand...
Click to collapse
if its truly unlocked, then you should already have the U1 firmware on it. Get modded Odin and the U1 firmware, flash it in Odin and go from there. I never looked back after ditching the carrier junk on my phone
Sometime ago I did somethinh like that on my Arabian S7 Edge that I bough in Paraguai, it was Dual Sim model and i flashed ZTO CSC via Odin, and the phone was working well, but i'm not sure if the reverse works, and even the models were similar (F vs FD version) in your case u have 965U vs 9650, I would not take that risk, i thing that a korean or chinese model is 9650 too
look at this picture, US version has more bands so the modem could be different, you can try but you're risking your phone
davenasc said:
look at this picture, US version has more bands so the modem could be different, you can try but you're risking your phone
Click to expand...
Click to collapse
yep, they are different phones that just so happen to use the same processor. Different bootloader, same chassis for whatever reason. Anyways, there have been threads talking about converting the 9650 to a 965u, but ive never seen anyone confirming that it indeed works. Big risk, but as long as one can get back to Odin mode, one should be good.
Hello, looking for some help to see if anyone can help me find the firmware of my A526U specifically for AT&T? I have moved my phone over from TMobile where I purchased it from, and am looking to re-flash it to AT&T. Was working fine for a few months, now I'm no longer able to make or receive calls.
After inserting the new AT&T SIM card, the TMobile splash screen still shows up. The Service Provider software version reflects TMobile still as well and I'm concerned that for whatever reason the phone did not fully update after inserting the new SIM. I spent 2 hours on the phone with AT&T support after the store said they couldn't help me. Pulled the SIM card out, restarted phone, put it back in, reset network settings etc. I've searched sammobile and I cannot find the AT&T firmware, only TMobile, Sprint, and TMK. I would sincerely be greateful please if anyone could help me by pointing me in the right direction for the firmware for this model phone.
AT&T doesn't make their firmware available publicly - for any device. I have a source who can get me Samsung firmware for any USA device - even AT&T. But he charges me for each one
I appreciate the quick response! Is there any option I have here? Could I try flashing a "U1" firmware to his phone then? He's currently on A526USQS4CVA6. I actually found your other post as I was also working on my note 10 plus - https://forum.xda-developers.com/t/n975u-and-n975u1-firmware-links-here.3957648/. If I'm reading that correctly, I should be able to correct? If so, how can I tell if the version I'm downloading is "downgrading the bootloader"
aschaffer35 said:
I appreciate the quick response! Is there any option I have here? Could I try flashing a "U1" firmware to his phone then? He's currently on A526USQS4CVA6. I actually found your other post as I was also working on my note 10 plus - https://forum.xda-developers.com/t/n975u-and-n975u1-firmware-links-here.3957648/. If I'm reading that correctly, I should be able to correct? If so, how can I tell if the version I'm downloading is "downgrading the bootloader"
Click to expand...
Click to collapse
1. Yes, you can try flashing U1 if you want
2. You can't "downgrade the bootloader" - Odin won't let you.
3. In A526USQS4CVA6, "4" is the position of the bootloader level/revision/binary. Make sure that whatever U1 firmware you download also has a 4 in that spot and you'll be fine. (Or just get the firmware from Frija or one of the other similar firmware download tools, because those throw you whatever the newest version is automatically)
iBowToAndroid said:
1. Yes, you can try flashing U1 if you want
2. You can't "downgrade the bootloader" - Odin won't let you.
3. In A526USQS4CVA6, "4" is the position of the bootloader level/revision/binary. Make sure that whatever U1 firmware you download also has a 4 in that spot and you'll be fine. (Or just get the firmware from Frija or one of the other similar firmware download tools, because those throw you whatever the newest version is automatically)
Click to expand...
Click to collapse
Thank you very much sir! I shall give this a go this weekend! You guys rock!
My AT&T N10+ N975U is running on Pie. It transitioned seamlessly with no changes made on my end. It was already using 4G VoLTE though. Same sim card.
I would contact AT&T advanced tech support as there may be an easier way.
4G VoLTE needs to be enabled in hidden settings.
blackhawk said:
My AT&T N10+ N975U is running on Pie. It transitioned seamlessly with no changes made on my end. It was already using 4G VoLTE though. Same sim card.
I would contact AT&T advanced tech support as there may be an easier way.
4G VoLTE needs to be enabled in hidden settings.
Click to expand...
Click to collapse
Your AT&T phone? So it's originally an AT&T model that you're still using with them? That's not the same situation that the OP is in
iBowToAndroid said:
Your AT&T phone? So it's originally an AT&T model that you're still using with them? That's not the same situation that the OP is in
Click to expand...
Click to collapse
The U is the AT&T variant vs the U1 which is the unlocked variant, correct?
blackhawk said:
The U is the AT&T variant vs the U1 which is the unlocked variant, correct?
Click to expand...
Click to collapse
Yup. But OP has a T-Mobile model that they moved to AT&T. There's also no guarantee that a Note 10+ will work the exact same way as an A52. You're also running 3 year old firmware, while OP is fully updated.
So i don't see the correlation.
iBowToAndroid said:
Yup. But OP has a T-Mobile model that they moved to AT&T. There's also no guarantee that a Note 10+ will work the exact same way as an A52. You're also running 3 year old firmware, while OP is fully updated.
So i don't see the correlation.
Click to expand...
Click to collapse
The old firmware works fine on 4G VoLTE... that's likely not the issue. What is the issue is it wasn't running on 4G VoLTE so it's likely the settings and sim card need updating not the firmware.
Hi All, thought I would provide an update... After spending hours on the phone with AT&T support this week and being frustrated with the AT&T store, I decided to proceed forward with flashing the U1 version. What started this all was last week my son could no longer make or receive calls on his AT&T A52 phone (we ported it from TMobile September 2021). The store and AT&T advanced tech support said there were issues with people's BYOD devices, even though the A526U and A526U1 shows on the supported devices list. The store rep said he's been getting people in left and right that can't make or receive calls, and all they can do is upsell customers to an AT&T branded phone.
SO... my son's phone was on A526USQS4CVA6. Startup screen showed TMobile still, even with the AT&T SIM card in it. I proceed to flash the A526U1OYM4CVB2_ATT that I found from Sammobile. Was hoping someone had just the "U" version but I couldn't find this anywhere. When doing the flash, I used the Home_CSC file (I had to download a patched version of ODIN as it was stuck as setting up connection) and when it finished it would just keep going back to the download screen on the phone and I freaked out. I did some more research and decided to flash again using CSC instead of Home.CSC (I did a backup using smart switch on my PC luckily). This WORKED! I'm guessing because the software version he was on was different than what I was trying to flash too so maybe this is why I needed the CSC for a clean flash (there was no user data file that downloaded from SAMMOBILE).
Now, calls are working on my son's phone again! AND his service provider software version now reflects ATT vs TMB! Man this has been one heck of a journey lol. I've seen numerous forums on google of people having the same trouble with me, their BYOD devices not working. Seems a flash of U1 worked for me, so hopefully this helps others out there!