Hello everybody,
This morning my Redmi Note 5 ask me install an update.
I did as asked.
Since The phone is not booting, no logo, only a back lit black screen.
When I push the power button for several seconds, the screen turns off then the backlight turns on and that'all.
I try to boot in recovery mode with "Volume Up" and Power Button, but I get the same behavior.
Does anyone have an idea what to do?
Thanks and best regards
I have the same problem, no signs of life. None of the button combinations work. Phone seems to be dead. I flash in EDL mode but can't power on phone
Related
Ok so since I can't remove the battery how do I power down the phone after a bad flash and I'm stuck at splash screen. When I hold down power button the capacitive buttons flash then everything turns off but when I let my finger off of the power button the phone turns back on and process repeats. My phone is sitting here burning the battery stuck on the screen because I can't turn it off.
xlxcrossing said:
Ok so since I can't remove the battery how do I power down the phone after a bad flash and I'm stuck at splash screen. When I hold down power button the capacitive buttons flash then everything turns off but when I let my finger off of the power button the phone turns back on and process repeats. My phone is sitting here burning the battery stuck on the screen because I can't turn it off.
Click to expand...
Click to collapse
When the phone turns off immediately hold volume button. The phone will boot in bootloader. Choose recovery, click power button. Then do a full wipe, flash different rom or do nandroid.
Sent from my lair.
"Correction" Vol-Down
Hi,
My Zenithink c93 decided not to boot. It gets stuck at the android logo with three horizontal white lines above it going across the screen as soon as I turn it on. I've tried pretty much every button combination (power, back, vol up and vol down), but it didn't work. The only combo that gives a different result is power button + back, which shows the android logo with the words "Upgrading" directly beneath it, then turns off after about 2 seconds. I can't even get into the recovery menu so I'm really stuck. Also, the tablet is not rooted.
Things I've tried:
Wait at the android logo screen for 15 minutes.
Desolder the battery for 10 seconds and solder it back again.
Copy zt-update.zip to the micro-SD card and tried doing the upgrading process.
They all did not solve the problem. How do I fix this?
anyone?!!!
I installed TWRP 3.0.2-1 on my Sprint Galaxy S6 Edge. I booted into recovery mode, and I'm on the normal TWRP screen with the 8 options. But it doesn't let me open any of them. After a few seconds, the lock shows up, and after a few seconds more the screen turns off. I can turn it back on with the power button but I can't use the TWRP's swipe to unlock. Holding the power button does nothing. Holding volume down, power, and home (download mode) will make the loadup screen start to show up, but then it'll stop there for a really long time, before eventually going back to TWRP recovery and repeating all over again. If I keep holding the combination, it'll just loop the loadup screen over and over again. What do I do?
EDIT: I actually can get into download mode if that helps at all, my home button is just really messed up and does not always click well.
I have experienced the dreaded Samsung screen of death, 6 days ago I received a text and saw the blue flashing notification light but minutes later when i picked up the phone, the screen was black and not responsive. I have tried every hard and soft reset option, from holding power button and volume buttons to holding all 4 buttons at the same time but nothing has worked. Does anyone have any other suggestions before i send it away for repair? Will allowing the battery to die have any effect? The light is still flashing six days later.
Try to enter in recovery mode (Phone must be off, then hold volume up, home and power)
Look for message on the bottom on the screen
Did you see any unnormal message, like "error" or something?
If you can't turn off the phone, then restart him, holding for min. 7 seconds volume down and power. If you see a screen reaction, then quickly hold the "recovery mode" sequence.
After splash screen, screen blank but phone sinks with BT & capacitive lights active
Today I tried to update my phone to the newest firmware (I think it was .210, but I know it was from August 5th on firmware finder...I know its a long time to wait to update, but I started a new job, moved to a new city, etc. so things have been super crazy). Unfortunately, after flashing with EMUI Flasher, the phone rebooted and then got an update failure. I restarted the phone and waited but the screen was black. However, my smart band paired and if I press the power button, the capacitive button lights turn on, but the screen is blank/black. I have tried rebooting, both regularly holding power for 20 seconds as well as holding the power key with volume up and then volume down. I can reboot into a recovery of sorts and tried to wipe cache and restart, as well as boot into safe mode, but both result in the black screen from before. I can also boot into fastboot, but don't know what I could do to fix this.
Any advice as to how I can save my phone would be really appreciated. I'm really hoping I don't have to wipe the phone.
Please help me!