Bricked Beelink Mini 3 v2 - Any ideas? - Android Stick & Console AMLogic based Computers

Hello, attempting to flash [S905X][FINAL]atvXperience seems to have hard bricked my Beelink Mini MX II III. Flashing failed with an X in front of the android guy, and now the box shows no signs of life. Any ideas for a fix?
Pictures of the board
https://imgur.com/a/ODPBNoZ

joeshmoe1 said:
Hello, attempting to flash [S905X][FINAL]atvXperience seems to have hard bricked my Beelink Mini MX II III. Flashing failed with an X in front of the android guy, and now the box shows no signs of life. Any ideas for a fix?
Pictures of the board
https://imgur.com/a/ODPBNoZ
Click to expand...
Click to collapse
Same hear, thats will happen when we flash some Andriano ROM and whatever they are called!! Nooobies rom

I have this device, try my android tv 9 rom and here is a video i made of how to unbrick your box
And see my rom here https://aidansrom.ml

aidanmacgregor said:
I have this device, try my android tv 9 rom and here is a video i made of how to unbrick your box
And see my rom here https://aidansrom.ml
Click to expand...
Click to collapse
Your rom bricked mine device. Mine device dont have TP

Formingus said:
Your rom bricked mine device. Mine device dont have TP
Click to expand...
Click to collapse
TP? not sure what you mean here, and are you installing using USB Burning Tool? this is the only way to upgrade to android 9, the SD card method wont work as android 9 has significant changes to partitions that the SD card method cant make

aidanmacgregor said:
TP? not sure what you mean here, and are you installing using USB Burning Tool? this is the only way to upgrade to android 9, the SD card method wont work as android 9 has significant changes to partitions that the SD card method cant make
Click to expand...
Click to collapse
Actually, i write to you on message and on the forum also and describe mine problem. Probably you didn't get or missed.
Downloaded all your ROMs for s905x and decide to test them.
Flashed few times two ROM's and everything was OK. Flashing via USB Burning Tool
1.[v7.5] (Nexbox) Aidan's ROM [S905X] Nexbox a95x 1GB 2GB+.img
2.[v7.5] (UNIVERSAL) Aidan's ROM [S905X] 1GB 2GB+.img
After i flash [v7.5] (MXQ) Aidan's ROM [S905X] [P212, P214 & P242] MXQ Pro 4K 1GB 2GB+ (720pUI & 210DPI).img
Box won't go anymore in Recovery mode.
USB Burn Tool will not recognize as a device anymore even reinstalled LIB Drivers and tested on 2 PC with Win 7 and Win 10
Via SD Card will not be recognized too - Fashing not start at all possible due missing recovery.
This Box don't have TP. There was no need to press the reset button to be connected when i flash with success, only inserting USB was enough. Now Box will start and hang on Aidans TV Logo and stay there forever. About Hardware its not 100% .
Mine Box is Beelink Mini MXIII 2GB-32GB S905X AnyHelp will be appreciated.

This is mine Box from hardware

Formingus said:
This is mine Box from hardware
Click to expand...
Click to collapse
Heres My Board & Points To Short
Your browser is not able to display this video.

Try just waiting.
Open USB, load other image which you knows it worked before, press Start immediately in USBT, than plug in your USB A-A and push the recovery button with toothpick. And than just wait. 5-15mins
Works every time with my box. No need to short anything.

Related

Mecool m8s pro+ S905 2/16gb bricked

Hi,
Just bought this tv-box and while trying to update it with a different rom bricked it. It shows just red LED and nothing happens, also while trying go into recovery (toothpick + power cable).
Does anybody have detailed tutorial how to unbrick the box ?
Thanx in advance.
I am in your very same situation. Tried the sd card burning method and also the usb one, but no success at all. Hope there is some solution.
resadent said:
I am in your very same situation. Tried the sd card burning method and also the usb one, but no success at all. Hope there is some solution.
Click to expand...
Click to collapse
Maybe someone could place a foto with indicated pins (to make circuit on flash chip) to go into recovery mode ?
etemmu666 said:
Hi,
Just bought this tv-box and while trying to update it with a different rom bricked it. It shows just red LED and nothing happens, also while trying go into recovery (toothpick + power cable).
Does anybody have detailed tutorial how to unbrick the box ?
Thanx in advance.
Click to expand...
Click to collapse
Head over to FreakTab, they have tutorials on how to unbrick it
Patrck744 said:
Head over to FreakTab, they have tutorials on how to unbrick it
Click to expand...
Click to collapse
We, or at least I, have tried all the tutorials on freaktab and read a lot of things on the matter but nothing seems to do the trick. It's really frustrating.
rubbish
resadent said:
We, or at least I, have tried all the tutorials on freaktab and read a lot of things on the matter but nothing seems to do the trick. It's really frustrating.
Click to expand...
Click to collapse
There might be a hardware change for those boxes, the Nexus ROM TV Stock thread has pics on what changed. Best to watch that thread since a solution might be posted soon
I am in the same situation. I tried the sd card burning method and also by the usb cable, but no success at all.
I have got m8s pro+ 2/16gb s905x, The device was purchased on the gearbest website.
some news from my yesterday fight:
sd card burning - many variants of rom, after restart, but on the mainboard there was not observed the reset button, only place named "k1" -> I soldered two points from "k1 place" to make a reset
after that
try by male-male usb cable and usb burning tool 2.0.8, Error result: [0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
I tried 4 different firmware's, and the same happens every time. Can anyone suggest something?
I can copy whole error if it can help determine the problem.
found on the internet
Romcode / Initialize DDR / Read initialize status / USB Control setup error
-> An error occurs when memory chips do not match. Firmware with ubut for some, but sew on others. It remains to ask the seller about the original firmware: (or shovel (look) available.
resadent said:
We, or at least I, have tried all the tutorials on freaktab and read a lot of things on the matter but nothing seems to do the trick. It's really frustrating.
Click to expand...
Click to collapse
I'm in the same situation!
gearbest give me a link for downloading yhe firmware but that don't work for me :
mega.nz/#F!gqgXwSCa!sFNDXrV_EMzAYAcJ68dV0w
If that can help someone.
Regards,
Cody57 said:
I'm in the same situation!
gearbest give me a link for downloading yhe firmware but that don't work for me :
mega.nz/#F!gqgXwSCa!sFNDXrV_EMzAYAcJ68dV0w
If that can help someone.
Regards,
Click to expand...
Click to collapse
I gave up after 3 days of wasting time with tools and this box... Ordered xiaomi mi box this time.
etemmu666 said:
I gave up after 3 days of wasting time with tools and this box... Ordered xiaomi mi box this time.
Click to expand...
Click to collapse
I will do the same....
i brick mine.....
Any help?
Where can i find *.img file and instruction to brink back in life?
Please help
I can help. My xiaomi mi box has just arrived, after a couple of hours of testing i can say, put that **** (m8s) to trash, buy xiaomi. I am happy that m8s was hard bricked now.
leonkoum said:
i brick mine.....
Any help?
Where can i find *.img file and instruction to brink back in life?
Please help
Click to expand...
Click to collapse
I trie so many roms... without success....:crying:
Cody57 said:
I trie so many roms... without success....:crying:
Click to expand...
Click to collapse
it's not the deal with ROM but with bootloader and recovery. Because it's not working rest of the problems are what box buy now ? Xiaomi or if are rich, nvidia. Screw that chinese scum. Try MI BOX and you'll find that xiomi is the real proffesional android tv (it's quick, responsive and my wife can handle it so it's the best user freiendly commercial )
etemmu666 said:
it's not the deal with ROM but with bootloader and recovery. Because it's not working rest of the problems are what box buy now ? Xiaomi or if are rich, nvidia. Screw that chinese scum. Try MI BOX and you'll find that xiomi is the real proffesional android tv (it's quick, responsive and my wife can handle it so it's the best user freiendly commercial )
Click to expand...
Click to collapse
I have a nvidia shield and I order a xiaomi mi box....
it was just to test a new box and it wasn't too bad.... before testing a new firmware
HELLO the solution for reinstall your rom
hello i have found the solution for you i have received my mecool m8SPRO+ today and i search button recovery
i have found this on freaktab :
You need to press the hidden reset switch (accessed via pinhole on bottom of case) when you connect the USB cable, and it's got to connect to the USB OTG jack, which is the one closer to the power jack.
or see on this video youtube on front panel : xxxxs://XXXX.youtube.com/watch?v=WpThZ2sgkhUt
or maybe same at this video an other place : xxxs://youtu.be/N27pAxtcDSg?t=268
if is not clic take a pinhole if is ok you arrived after bootloader MECOOL ON menu
and take a factory reset
if you don t boot
try method with microsdcard take on sdcard the firmware ota here only the file M8SPRO ota
xxxxs://mega.nz/#F!gqgXwSCa!sFNDXrV_EMzAYAcJ68dV0w
and renom on update.zip
then take power off if is ok you screen apperead with logo android green updating
or do method with usb burning tools
replace xx on web link the correct http
Unbrick the M8S Pro+ 2/16
Hi everyone,
I know how you're guys feel... Is there any new idea or suggestions to unbrick the devices?
After OTA Update the box only shows red and blue at the same time, no boot, no detection of windows with reset button or / with holding the circuit shortcut at "K1".
Can't believe that Amlogic is even worse than the Rockchip boxes to unbrick...
How to factory reset mecool m8s pro plus ? S905w android tv os
Guys i am in trouble with new mecool m8s pro plus ATV i bought..
I am new to xda ..
On the setup
Ipaired my remote
And then connected to my wifi
I then chose the option to put my email and password for the account..it signed in but in the end it was asking for location access i gave it but then i receive an error saying google sign in has stopped
And now i am stuck ..even whei restart box always stuck at the same loop
Guys i dont know what to do...i havent even seen its home screen ..i am in the loop of setting up device
I think maybe faftory resetting it may solve it...but i dont know how to do it ..as i dont know how to open recovery mode...

MXQ PRo+ 4K S905 . Help please!

Hello, I have this tv box (MXQ Pro+ S905) 2GB RAM / 16GB ROM
The stock firmware is horrible, can you help me to upgrade it?
Do you have some firmware?
I tried to flash some firmware, but i think they was incompatible, i got only errors
Originally bought two identical MXpro Android TV Boxes. Since one of them freezes at startup on Android logo (won't enter launcher). My question: is there any way to copy certain files & folders directly from the other identical box to get it to boot up correctly once again? *issue is that I have no use of any computer at the moment. Either this method or any other suggestions would be greatly appreciated! Thanks! -Dave.D.
LordMauryZ said:
Hello, I have this tv box (MXQ Pro+ S905) 2GB RAM / 16GB ROM
The stock firmware is horrible, can you help me to upgrade it?
Do you have some firmware?
I tried to flash some firmware, but i think they was incompatible, i got only errors
Click to expand...
Click to collapse
If you have s905X with blue board than try this one :
https://mega.nz/#!jQ8HWIoQ!ubMpueVYGPA_PtE9snE1buZXjLUeFJP-mOd6vX91wkw
what you need to do is procure the factory image. i may be wrong but there isn't a S905 with 2 gb ram and 16gb nand. the first ones were S905x (excluding capabilities of the S912). there are plenty of alternative roms available including linux based. search around and you will find your firmware. you can even contact the seller you bought it from including amazon and ebay. check chinagadgetreviews.com also. alot can be found there. theres other forums too. once you find your correct firmware, reflash it and see if that resolves your issues. if not. boot twrp on the other one and make a full backup. take this backup, and move it to an area on your sd where you can find it then restore it on the buggy box. make sure you keep a backup copy of everything that works, especially if you cannot find the original. if you look really really hard, you may even find some fully compatible generic images that some developers are kind enough to maintain. you may need to make friends with a ruski to get it tough. thats the best hint im willing to give without provoking any admins or mods (sorry guys if i broke any rules).
im going back under my rock now.
oh and another tip, not all devices are the same. even if they say the same brand. there are differences in wifi chips. you should be able to figure this out. usually theres some model or sticker on the bottom or on the box it came in
LordMauryZ said:
Hello, I have this tv box (MXQ Pro+ S905) 2GB RAM / 16GB ROM
The stock firmware is horrible, can you help me to upgrade it?
Do you have some firmware?
I tried to flash some firmware, but i think they was incompatible, i got only errors
Click to expand...
Click to collapse
I HAVE SAME PROBLEM HERE...JUST 1MONTH BACK I PURCHASED MXQ PRO 2GB 16GB ROM...S 605W BUT UNFORTUNATELY IT HAS STUCKED WITH A LOGO ....NOTHING MORE...
SEVERAL TRIED TILL UNABLE TO DETECT PC
I have android tv 7 roms for s905x and android tv 9 roms for s905x s905w and s912 based boxes https://aidansrom.wordpress.com
aidanmacgregor said:
I have android tv 7 roms for s905x and android tv 9 roms for s905x s905w and s912 based boxes https://aidansrom.wordpress.com
Click to expand...
Click to collapse
not detecting box by usb burning tool...
mbox55980 said:
not detecting box by usb burning tool...
Click to expand...
Click to collapse
ahh, you may need to figure out "Mask Rom Mode" to force your device to be detected by burn tool, assuming you have already tried different usb port on pc, reinstalling burn tool & Also tryed adding power at same time connecting the usb cable

Beelink mini MX III II Brick

Hi, during a failed coreelec installation attempt, I bricked my box. Is there any solution to unbrick this model (905x procesor, 2gb ram) My PC don't reconize the device.
I bricked mine with Adrians ROM !!!!
rafix095 said:
Hi, during a failed coreelec installation attempt, I bricked my box. Is there any solution to unbrick this model (905x procesor, 2gb ram) My
Formingus said:
I bricked mine with Adrians ROM !!!!
Click to expand...
Click to collapse
PC don't reconize the device.
Click to expand...
Click to collapse
You may need to use mask rom mode, i have one of these boxes and it should work with my rom, how did you update? Usung USB urning tool? The SD cadrd methis of updating wont work ONLY usb burning tool works to upgrade to android 9 from amd older version see video i made here on how to unbrick
Updated via USB Burning tool that will no more work.. Device will not get recognized after flashing [v7.5] (MXQ) Aidan's ROM [S905X] [P212, P214 & P242] MXQ Pro 4K 1GB 2GB+ (720pUI & 210DPI)ky mut.img.
Can we please focus on one thread to avoid any mistake and make thing easier for both of US ?
aidanmacgregor said:
You may need to use mask rom mode, i have one of these boxes and it should work with my rom, how did you update? Usung USB urning tool? The SD cadrd methis of updating wont work ONLY usb burning tool works to upgrade to android 9 from amd older version see video i made here on how to unbrick
Click to expand...
Click to collapse
OK Problem is solved via MAskMode or as i call TestPoint ---- Now device is alive again
Formingus said:
OK Problem is solved via MAskMode or as i call TestPoint ---- Now device is alive again
Click to expand...
Click to collapse
Thanks once more for your support

TX3Mini-A 2+16G(8723) 2018120068 with Spectec storage chip bricked

This box was constantly freezing. Read somewhere that it requires a new firmware. The firmware that was on the box when I got it was 20181229. Tried to install a new firmware TANIX TX3 MAX & MINI "DUAL OS EDITION from usb stick using the method according to Tanix-box.com website " UPDATE FROM TF/USB MEMORY" . The software was loading fairly slowly so I stepped away for a moment and when I returned I had a blank screen on TV. Rebooted the box but only received the boot display and a black screen. realized I had bricked the box, Tried to download the same software using the usb burning tool but no go. I then tried the firmware TANIX TX3 MINI 20171220 using the usb burning tool. It downloads for about 7 seconds and then stops with an error. Obviously the wrong file. Here are the pics of my card. Sure hope someone can help me out. If I have to short a pin can you give me some details as I am pretty new at this. I do now have the original firmware and have looked everywhere, but can't find it. Thanks for any help on this issue, I've been reading and looking for a solution foe quit some time now.
Latest development, using USB Burning tool I loaded TX3Mini-20181210.img with no errors. I connected to TV and the T3 Mini logo cam on and the the android logo came on and was booting for just over 1 minute and then stopped and the display on the box was 0001.
billyfreeman said:
This box was constantly freezing. Read somewhere that it requires a new firmware. The firmware that was on the box when I got it was 20181229. Tried to install a new firmware TANIX TX3 MAX & MINI "DUAL OS EDITION from usb stick using the method according to Tanix-box.com website " UPDATE FROM TF/USB MEMORY" . The software was loading fairly slowly so I stepped away for a moment and when I returned I had a blank screen on TV. Rebooted the box but only received the boot display and a black screen. realized I had bricked the box, Tried to download the same software using the usb burning tool but no go. I then tried the firmware TANIX TX3 MINI 20171220 using the usb burning tool. It downloads for about 7 seconds and then stops with an error. Obviously the wrong file. Here are the pics of my card. Sure hope someone can help me out. If I have to short a pin can you give me some details as I am pretty new at this. I do now have the original firmware and have looked everywhere, but can't find it. Thanks for any help on this issue, I've been reading and looking for a solution foe quit some time now.
Latest development, using USB Burning tool I loaded TX3Mini-20181210.img with no errors. I connected to TV and the T3 Mini logo cam on and the the android logo came on and was booting for just over 1 minute and then stopped and the display on the box was 0001.
Click to expand...
Click to collapse
I installed TX3 mini 20181210.img on the box nd it worked. But the box is still freexing. Anyone else having this issue?
billyfreeman said:
I installed TX3 mini 20181210.img on the box nd it worked. But the box is still freexing. Anyone else having this issue?
Click to expand...
Click to collapse
Yo could try my custom Android TV 9 ROM, there are tx3 versions available, may work for you but no guarantees,
aidanmacgregor said:
Yo could try my custom Android TV 9 ROM, there are tx3 versions available, may work for you but no guarantees,
Click to expand...
Click to collapse
No doesn't work. Keep getting getinitial error

Problem with Amlogic s905w Rockchip 3229 Android box x96 mini Foyu

Hi dear friends,
thank you in advance for your help. I have a strange stuation (at least for me) with this box from Foyu x96 mini.As you can see in photo and also written on paper box , it has Amlogic S905W 4G 32G rom, but if i go inside Kodi for example in System it says it has Rockchip 3229... then also on recovery mode on boot mode it states "android recovery rockchip 322x ..... I've tried with Amlogic burning tool but it doesn't recognize the hub connection and it doesn't burn another rom for S905w. I've tried shortening nand pins..nothing
Have you got any suggestions to erase all and burn an Amlogic s905w Rom , considering there's an S905w cpu?? i don't think it's a false one! there's no Rockchip inside!
thank you
Isn'it strange? Any suggestions?
..seems i found the million dollar question.. the only post that puts in crisis all the forum...
ive seen amlogic devices recovery reporting as rockchip, its usally just a mismatched recovery, i would try and figure out mask rom mode for this board, see my video here for some info
aidanmacgregor said:
ive seen amlogic devices recovery reporting as rockchip, its usally just a mismatched recovery, i would try and figure out mask rom mode for this board, see my video here for some info
Click to expand...
Click to collapse
Thank you for your kind answer,but i tried also with mask mode,it only sound but no connection. For me it's a fake chip,otherwise why with rockchip tool it normally connects? Also on kodi it's incredibly slow,and in system maximum resolution is 1280*720!! Absurd
Hi , I have exactly the same problem with a tv box x96 mini locked in the logo screen. If you find a way to recover, please post it.
gherghe said:
Hi , I have exactly the same problem with a tv box x96 mini locked in the logo screen. If you find a way to recover, please post it.
Click to expand...
Click to collapse
I can't see if yours has amlogic s905w chip,anyway mine it's not locked,you can try with rockchip tool to burn image if you got Rockchip inside
yes I have a S905x chip, it doesn't look very good but I managed to take a picture.I tried with usb burninig tools but my box is not seen by the computer and I don't know how to use the nand method.
If your x96mini is not locked, you can help me with a stock firmware of your box, to try a rewrite of my box with the sd card method. Thanks anyway for the help. I have been looking for a solution to unlock the box for some time.
gherghe said:
If your x96mini is not locked, you can help me with a stock firmware of your box, to try a rewrite of my box with the sd card method. Thanks anyway for the help. I have been looking for a solution to unlock the box for some time.
Click to expand...
Click to collapse
Yours is s905w, seems same situation.. i haven't got original firmware,in my case mine is made by Foyu,you can try to find them on internet, i don't know.. don't know why they're recognized as Rockchip..
ok , thanks
cipposo said:
...i don't know.. don't know why they're recognized as Rockchip..
Click to expand...
Click to collapse
Maybe, because is it "faked" remarked RK3229 as S905W.
Try to setup mSD card with LibreELEC...
Release RK322x first mainline release · knaerzche/LibreELEC.tv
Kernel 5.5.0 uboot 202001 lima drm / mesa 20.0 (beta) hdmi up to 2160p hantro video hw decoding for MPEG2/VP8/H264 up to 1080p Wifi only for chipsets that have mainline support no preconfigured rc ...
github.com
mAtvXk said:
Maybe, because is it "faked" remarked RK3229 as S905W.
Try to setup mSD card with LibreELEC...
Release RK322x first mainline release · knaerzche/LibreELEC.tv
Kernel 5.5.0 uboot 202001 lima drm / mesa 20.0 (beta) hdmi up to 2160p hantro video hw decoding for MPEG2/VP8/H264 up to 1080p Wifi only for chipsets that have mainline support no preconfigured rc ...
github.com
Click to expand...
Click to collapse
Sure,probably it is,but with librelec would be only kodi...
Hello, thank you for your help. If I install the firmware from the link you sent me, can I then write another firmware? If I find the original firmware.
cipposo said:
Sure,probably it is,but with librelec would be only kodi...
Click to expand...
Click to collapse
Just to confirm if you have Rockchip inside, anyway LE is runned from SD card, nothing will be installed onto the box.
Ok thank you.
Hi, I tried LibreELEC but it doesn't work. I'm attaching the image with the received error, maybe you know what the problem is. Thanks
gherghe said:
Hi, I tried LibreELEC but it doesn't work. I'm attaching the image with the received error...
Click to expand...
Click to collapse
Did you create bootable media...
Create Media - LibreELEC.wiki
wiki.libreelec.tv
Yes I created a bootable sd card, with LibreELEC rk322x the box does not start, the LED remains off.
Well it look like you guys have a fake amlogic like me on the tag is 4GB RAM and 32GB flash store. All the inside chip has been marked like the real one but are fake. Main chip is RK3229 and the ram is just 1GB and 8GB flash. I successfully unbrick this **** using rkfactory tool and a rom for RK3229 chip. step to follow: 1. install rockcip drivers, 2. start factory tool, 3. load firmware in factory tool, 4. conect USB A - A cable to pc, 5. tooth pick in the AV port and pres the restore switch from inside, 6. connect USB A - A to the OTG USB port on the box the port is the one next to the tf card reader, 7, the hub is recognized by the pc and it be detected by the tool factory, 8. flash the firmware, enjoy.
Files:
1 Drivers: https://mega.nz/file/q8kk0ayA#XA3ZCoZK-Lu0LW1alqq6qKBmzFTj4gDDnlLWqq0Joso
2 factory tool: https://mega.nz/file/ihVnBC5L#Ri-IY7uVxcbaXEMkgb_bSXKMcwbkbAnYFxnEuizREaE
3 firmware: https://mega.nz/file/2k8EzJxY#cY_NWvIyof8Rnd7syOK9OYc5Fot19Ub76L46nzTrAAU

Categories

Resources