Need help here. I've got this message on ATT forum:
Hello, if you are good at computer skills and You are using a phone and PC at the same WI-FI.
You can install Fiddler as a proxy server and use it to sniffer traffic between your phone and ATT Server.
1) Install Fiddler
2) set up as server
3) Your phone- wi-fi setting- advanced - use proxy server - the ip adress of your computer.
4) go your phone to check software update,
5) Fiddler will sniffer the real download url of a up. file
I'm not capable of doing such things, so if you can, please do it!!!
So did anyone try it? if yes, does it work? can you share the download link?
Too risky too try, your phone might be locked
I tried this
jijibu said:
Need help here. I've got this message on ATT forum:
Hello, if you are good at computer skills and You are using a phone and PC at the same WI-FI.
You can install Fiddler as a proxy server and use it to sniffer traffic between your phone and ATT Server.
1) Install Fiddler
2) set up as server
3) Your phone- wi-fi setting- advanced - use proxy server - the ip adress of your computer.
4) go your phone to check software update,
5) Fiddler will sniffer the real download url of a up. file
I'm not capable of doing such things, so if you can, please do it!!!
Click to expand...
Click to collapse
I have a Lg h820, try to update with LG Mobile Support Tool and using Hotspot shield VPN "USA" and it showed me that there was an update available but the application it closed. Can someone try to see if it works?
It's possible but must folow this step
Firt if someone have an LG G5 h820 at oreo8.0
Second Install TWRP
Thid backup the firmware
And finally upload it
Just download it and update your phone via TWRP
Unlocked G5 H820 got stuck in Firmware Update using UPPERCUT LGUP 1.14
Unlocked G5 H820 got stuck in Firmware Update using UPPERCUT LGUP 1.14
Any solution to fix this problem appreciated?
Using G5 H820 got stuck in Firmware Update using UPPERCUT LGUP 1.14
LGUP started the update on the LG G5 H820 with version H82020n , its now stuck at 11% and now my phone is stuck in Firmware Update all the time when restarting and same error when restarting LGUP.
keep getting Error: Error Code = 0x2BC, Invalid command response code = 0x80000121
using this file LGH820AT-00-V30a-ATT-US-AUG-10-2018-ARB01+0.tot
Thanks
Related
hello. on vodafone firmware 10d, i try to flash firmware kdz ver. 10e from wind or 10g from tim italy, but that is the advertisement i have after flashing and second reboot. i reset already but at every reboot the same advertisement. when i click on OK, the phone boots, but i want remove this error. can anyone tell me if is possible??
i use lg up
thanks
That's been covered plenty of times in the G5 (and even G3) forums, for example here:
http://forum.xda-developers.com/g4/help/lg-h815p-fix-matched-cust-nt-code-mmc-t3336034
http://forum.xda-developers.com/showpost.php?p=67285155&postcount=84
http://forum.xda-developers.com/showpost.php?p=67223982&postcount=73
If you use the search you'll find even more threads with it.
doesn't work the hidden menu access
with TWRP or root file explorer, navigate to root/cust and delete all folder content then reboot
you'll see message will no longer show up after reboot
i am not rooted
with no root there is no way as far as I know
hi, can you tell me where you found the v10g kdz? i only managed to find the wind v10e (and doesn't solve the direct sunlight issue)
thank you (anche in pm se vuoi)
v10g KDZ is only for some carriers
note: the base is kind of the same for lets say v10d OPEN EUR kdz and v10g carrier kdz, so thinking that installing v10g carrier branded version does not mean you are more updated then v10d OPEN EUR
Thank you!
I went to sell my G5 today, and the shop refused to buy it because of that pop-up on boot.
Just curious though, now I have erased the folder, what would happen if I -
a) Unroot
b) Relock the bootloader
I am on a global stock rom V-20v I believe.
I want my Virgin Moble UK G5 to think it's H3G in order to get WiFi calling to work. So instead of deleting all the files in '/cust' I updated op_list.cfg & cust_path_mapping.cfg by adding the missing MCC/MNC code from the error message and pointing them to the same place as the H3G entries, in my case
'23430,FF=/OP/H3G_COM'.
The phone now boots up without the 2 error messages (OP name by Buyer Code & Current version is not available) but I get the 'Buyer Code' message a few minutes after booting.
I'm not sure if changing the files, or deleting them is best. But with the files updated, looking at the Global Settings via ADB shows that wfc_ims_enabled=1
Hi everyone,
I am not able to flash a "Middle East" KDZ for H860 over my phone which is H860 but with Taiwan Stock ROM. The phone is new; no rooting, no oem unlock, nothing. The current ROM version is 10e and I want to flash the AME KDZ which is basically 10g.
Using the patched version of LGFlashTool v2.0.1.6, I get an error "(S) Failed to Load". Using LGUP v1.14, the phone is recognized as H860, it restarts into download mode and gets to 9% (which is starting to send the KDZ to phone) and then it give an error msg:
Error: Error Code = 0x81000304
CBasicFlash::_func_LoadGPTF - ErrorCode:8224
I am working on a Windows 10 PC with all the drivers installed and I can access the phone through ADB, Fastboot, LG Bridge, with no issues. The only issue is that I am not able to flash the KDZ although it is for the same model H860.
I have tried a different PC and a re-downloaded the KDZ directly from LG's website. Same issues.
PS: In LGUP, I tried: Refurbish and Upgrade options.
Does anyone have any suggestions?
UPDATE: I tried flashing a Singapore KDZ for H860 as well and it gave the same errors.
This forum is not as useful as it used to be once upon a time. Disappointed.
Try with LG support tool from LG
Please update me with this case. I have twn vrsion also bought from one of the online shop in dubai and i want to flash also the uae kdz. thanks
---------- Post added at 06:49 PM ---------- Previous post was at 06:30 PM ----------
Dr.Alani said:
Hi everyone,
I am not able to flash a "Middle East" KDZ for H860 over my phone which is H860 but with Taiwan Stock ROM. The phone is new; no rooting, no oem unlock, nothing. The current ROM version is 10e and I want to flash the AME KDZ which is basically 10g.
Using the patched version of LGFlashTool v2.0.1.6, I get an error "(S) Failed to Load". Using LGUP v1.14, the phone is recognized as H860, it restarts into download mode and gets to 9% (which is starting to send the KDZ to phone) and then it give an error msg:
Error: Error Code = 0x81000304
CBasicFlash::_func_LoadGPTF - ErrorCode:8224
I am working on a Windows 10 PC with all the drivers installed and I can access the phone through ADB, Fastboot, LG Bridge, with no issues. The only issue is that I am not able to flash the KDZ although it is for the same model H860.
I have tried a different PC and a re-downloaded the KDZ directly from LG's website. Same issues.
PS: In LGUP, I tried: Refurbish and Upgrade options.
Does anyone have any suggestions?
UPDATE: I tried flashing a Singapore KDZ for H860 as well and it gave the same errors.
Click to expand...
Click to collapse
Please try this one:
thebiker said:
I solved the problem. I have just updated all LG file. LG UP, LG Lab, LG 850 DLL. Finally I successfully updated my phone.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g5/help/lg-g5-brick-root-t3411389
Get the updated tools here for H860:
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
medo18 said:
Try with LG support tool from LG
Click to expand...
Click to collapse
Thanks for the suggestion. The LG support tool does not work with my version of LG G5 (I am not sure if it works with any G5 at all), it says that I need to use LG Bridge instead because LG Support Tools does not support my phone.
However, I tried the "Recovery" option in LG bridge, but it checks the IMEI and decides that my phone needs the latest Taiwan rom instead of what I want (which is UAE).
engineer000 said:
Please update me with this case. I have twn vrsion also bought from one of the online shop in dubai and i want to flash also the uae kdz. thanks
---------- Post added at 06:49 PM ---------- Previous post was at 06:30 PM ----------
Please try this one:
http://forum.xda-developers.com/lg-g5/help/lg-g5-brick-root-t3411389
Get the updated tools here for H860:
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
Click to expand...
Click to collapse
I already got the the newest version of LG UP. The phone is recognized, but it does not proceed with the upgrade properly.
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Dr.Alani said:
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
Where did you bought yours? I bought from Yallashop.
Where are you seeing that error? As your phone startup? How about using the proper DLL on the guide and flash it again?
it seems to be related to different customizations. i don't know if flashing tW version will stop it. but this stopped me from flashing a AE fw
engineer000 said:
Where did you bought yours? I bought from Yallashop.
Where are you seeing that error? As your phone startup? How about using the proper DLL on the guide and flash it again?
it seems to be related to different customizations. i don't know if flashing tW version will stop it. but this stopped me from flashing a AE fw
Click to expand...
Click to collapse
I got mine from souq.com.
The error shows only at phone startup. Its not causing any other visible problem.
I couldn't get the H860 DLL msi anywhere on the web.
Sent from my LG-H860 using XDA-Developers mobile app
Dr.Alani said:
I got mine from souq.com.
The error shows only at phone startup. Its not causing any other visible problem.
I couldn't get the H860 DLL msi anywhere on the web.
Sent from my LG-H860 using XDA-Developers mobile app
Click to expand...
Click to collapse
Try it here:
Get the updated tools here for H860:
http://www.mylgphones.com/download-l...g-g5-h860.html
engineer000 said:
Try it here:
Get the updated tools here for H860:
http://www.mylgphones.com/download-l...g-g5-h860.html
Click to expand...
Click to collapse
I think the link is broken.
Dr.Alani said:
I think the link is broken.
Click to expand...
Click to collapse
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
http://www.mylgphones.com/download-lg-flash-files-dll-for-lg-g5.html
sorry it is broken :/
try this:
http://downloads.codefi.re/autoprime/LG/LG_G5/LGFlash/LGH860_20160316_LGFLASHv216.dll
http://downloads.codefi.re/autoprime/LG/LG_G5
Dr.Alani said:
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
You can eliminate the error by reflash the phone with LG bridge (can download officially from LG). In "Software update" tab, there's "Update error recovery" which will automatically download the official firmware for your G5 and of course, the annoying startup error message will go away.
ted presley said:
You can eliminate the error by reflash the phone with LG bridge (can download officially from LG). In "Software update" tab, there's "Update error recovery" which will automatically download the official firmware for your G5 and of course, the annoying startup error message will go away.
Click to expand...
Click to collapse
I am afraid that it might download the software based on the IMEI and then my phone will be back to Taiwan software instead of the AME currently installed.
Sent from my LG-H860 using XDA-Developers mobile app
Can you please write a detailed tutorial of how to flash a kdz on H860 variant? I have the same error and I can't find a way how to solve this. So many informations and nothing works. Thank you very much.
Dr.Alani said:
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
After this update is possible to root the H860?
Not working for me
Dr.Alani said:
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
I installed required latest drivers.
I did exactly same procedure as mentioned above, but not working for me.
Although it recognizes my device. (attached pic 1).
But when i try to select it gives error. (attached pic 2).
I also followed the procedure in last post by "BaBaK SpY" in following link
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
But same result as above.
I face the same problem as u did
Dr.Alani said:
Hi everyone,
I am not able to flash a "Middle East" KDZ for H860 over my phone which is H860 but with Taiwan Stock ROM. The phone is new; no rooting, no oem unlock, nothing. The current ROM version is 10e and I want to flash the AME KDZ which is basically 10g.
Using the patched version of LGFlashTool v2.0.1.6, I get an error "(S) Failed to Load". Using LGUP v1.14, the phone is recognized as H860, it restarts into download mode and gets to 9% (which is starting to send the KDZ to phone) and then it give an error msg:
Error: Error Code = 0x81000304
CBasicFlash::_func_LoadGPTF - ErrorCode:8224
I am working on a Windows 10 PC with all the drivers installed and I can access the phone through ADB, Fastboot, LG Bridge, with no issues. The only issue is that I am not able to flash the KDZ although it is for the same model H860.
I have tried a different PC and a re-downloaded the KDZ directly from LG's website. Same issues.
PS: In LGUP, I tried: Refurbish and Upgrade options.
Does anyone have any suggestions?
UPDATE: I tried flashing a Singapore KDZ for H860 as well and it gave the same errors.
Click to expand...
Click to collapse
pLEASE Help me i face the same problem u did . i Tried evry method n facing the same problem :crying::crying::crying::crying:
---------- Post added at 12:13 PM ---------- Previous post was at 11:19 AM ----------
QSR1 said:
I installed required latest drivers.
I did exactly same procedure as mentioned above, but not working for me.
Although it recognizes my device. (attached pic 1).
But when i try to select it gives error. (attached pic 2).
I also followed the procedure in last post by "BaBaK SpY" in following link
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
But same result as above.
Click to expand...
Click to collapse
my lgup says cannot load my h860 model
. i have h860 and update it with v20a hongkong rom. every thing is good only fast charge disppointing me and take alot of time to charge about 1.30hour to fully charge. i update via lgup and usb .
anybody face to this problem ?
any way or recommend to solve it?
i will attach the graph of battery charge in android 6 and android 7.
slope of line in android 6 battery charge is much higher than 7 .
---------- Post added at 05:02 PM ---------- Previous post was at 04:46 PM ----------
graph of battery charging in android 6 vrs android 7 in my lg h860.
http://s2.picofile.com/file/82827979...7_09_23_58.png
http://s3.picofile.com/file/82827982...6_22_30_00.png
android 7 charging speed very bad and is slow. and its clear in pictures.
why the reason???
Hello,
I'm here trying to get help to solve a LG L65 D280n with the null IMEI problem.
I'm hopping there's no problem with the hardware as it was working ok and didn't fall or something else. It just got that way and it was nw unlocked some months ago.
Well, I've 1srt search and follow many youtube videos and read a lot of threads.
At 1srt I've tried to use official software form LG. LG mobile tool and drivers.
I download and install them everything goes well, phone is detected and after usb connection the firmware download started.
Problem was, after the point that it decompress the firmware and it was supposed to start copying it to the phone, the LG app just hangs with the windows error as it stops responding.
Using a machine with Win7 Pro x64.
From this saved the LG kdz file and the dll file that was downloaded.
I can't get another because the links from:
http://redirect.viglink.com/?format...g-phone-firmware.com/firmwar...-Tutti-50.html
are broken to the Europe/Portuguese version A or B of this phone that was original from MEO/TMN
Then I've tried another LG tool, older I believe. It requires qualcomm software, visual c++ etc.
All went well until I've selected a com port at the QPST configuration and then at the RF NV manager were I would try to write the IMEI it fails.
I select the COM port I've added before at the QPST configuration app but when I select the READ from phone option it just returns error ... DM command 19-24.
I was hopping to flash the modem only or to write the IMEI manually but its getting hard to solve the communication problem even after trying in different computer and with 3 version of drivers and software.
Recovery mode only shows if I wanna do factory reset, I did.
Can someone help?
Tried also EFS Professional now using Qualcomm NV tools, I can select the phone COM port but if I try to connect to it with 000000 Send SPC option on, It returns error, unable to send SPC to the phone.
I'm puzzled ...
I have two G5s (the wife uses one), both are UK, carrier-free, and seem to be identical. One has OTA updated to Oreo, the other hasn't and shows no inclination to do so. There is one difference though, they run/ran slightly different versions of Nougat:
The one that updated was previously running v20v-EUR-XX. The one that won't runs v20r-234-10. I don't know what that build is. It has previously received incremental updates to Nougat with no problem. Is it somehow an invalid region to receive an Oreo update?
Both phones were bought used, so I don't know their exact history.
If it's not going to update OTA then I will try flashing the update. TBH there's almost too much information here about flashing ROMs - I'd like to know the simplest way to flash a stock ROM, I don't want a rooted phone (been there, done that, fun, but banking apps etc. I depend on won't run). My desktop & laptop run Linux, so Windows-based tools won't help (unless they'll run under Wine ).
TIA to anyone who can help me out here.
LG H850 Oreo Update
ONLY LG H850(GBR) and H850 (VDF) received the Oreo Update.
Thanks, so what region is 234-10? Doesn't seem to correspond to any listed ROMs.
Any pointers to the best simple no-frills flash guide?
Looks like yours have branding, check which operator folder you got in "cust" folder.
Thanks for the hint.
The cust folder contains stuff on all UK operators. I don't entirely understand how this info works, but in op_list.cfg is the line 23410,O2=/OP/TLF_COM, which I guess means it was originally O2 branded. There's no trace of anything O2 on it now, but it would have originally shipped with AOS 6, and had already received 7 when I got it. That upgrade probably dropped anything specific to O2.
Is there any way to hack this so it appears to be running generic EUR software, or do I have to manually flash it to get 8?
Thks
There is GB euro open version but when I tried on my EE g5 it install french orange "jeus" app plus crap from Vodafone Romania, on the top of that you will get pop up error every time you restart your mobile about wrong customisation or something like that , other than that I loved oreo. Because of above I revert back to original ee software and just checking for update. G5 is not my primary phone so I don't have pressure about. EE was always slow on updates so this is normal in that case,not sure about other UK operators.
The EUR-XX build runs OK on my other G5, it updated OTA. This phone with O2 region code is not on O2 any more - I don't think it was ever carrier locked, but must have been bought from O2 originally. So even if O2 builds do update OTA, presumably it will only happen if they've got O2 SIMs in - I don't really follow how all this stuff works!
How did you install the ROM you tried out? I'm still trying to understand what the various tools being touted actually do.
I have the same problem.
I have an H850 with an unlocked bootloader and rooted.
There is no OTA update.
When I check on https://imei.guru/ I get:
Model: LGABCD
Region: ABC
When I check on https://proimei.info/en/checker/lg I get:
SUFFIX AO2UTN
BUYER O2U
BUYERNAME O2
I can try LG Bridge but I don't want to cause any issues since I'm rooted and the bootloader is unlocked.
Do I ned to use LG UP instead? And will I lose my data?
Any suggestions very welcome.
Thanks
As you're already unlocked and rooted, it should be a simple matter to flash a new system ROM. AFAIK you won't have to lose data. It's when you unlock the boot loader that it wipes all data.
In my case I don't have root, and I don't want a rooted phone after an upgrade. I'd prefer not to have to wipe and restore if possible too, but I can't work out how to do that.
I downloaded kdz and flashed with lg up, you can try if you really want oreo before O2 release. In worse case you can wait, and it doesn't matter what sim is in the mobile, when update is ready you will receive notification, I got different sim in my old g5 and previous updates was downloaded and installed without any problems.
Ah, thanks for that, maybe I'll just wait for O2 to get their act together! I can't use LGUP as I don't run any Windows machines, I'm all Linux. The closest I can get is XP running in a VM, but even though I can map a USB port into the VM it still doesn't recognize either of my devices. Uppercut doesn't help either .
konio25 said:
I downloaded kdz and flashed with lg up, you can try if you really want oreo before O2 release. In worse case you can wait, and it doesn't matter what sim is in the mobile, when update is ready you will receive notification, I got different sim in my old g5 and previous updates was downloaded and installed without any problems.
Click to expand...
Click to collapse
Which LG UP did you use?
Because this thread recommends not using LG UP and using UPPERCUT instead.
However, VirusTotal shows lots of issues:
https://www.virustotal.com/#/file/d...366b6643a5922cd3b09a3b1a9296b8c0a8f/detection
and so I would prefer to use LG UP instead, if it's compatible with H850.
Thanks
I can't remember exactly which LGUP I used, I tried a couple. A bit worrying about the virus reports in uppercut, one advantage of running in a VM, I can always just trash the image and go back to the previous state.
As I understand uppercut, it doesn't replace LGUP, just tries to fix some device detection issues then launches LGUP to do the actual update. But that still didn't work
No Expert said:
Which LG UP did you use?
Because this thread recommends not using LG UP and using UPPERCUT instead.
However, VirusTotal shows lots of issues:
https://www.virustotal.com/#/file/d...366b6643a5922cd3b09a3b1a9296b8c0a8f/detection
and so I would prefer to use LG UP instead, if it's compatible with H850.
Thanks
Click to expand...
Click to collapse
Hi,
I used version 1.14.3 (apparently this is the latest).
I flashed my g5 H850 several times as I wasn't sure if this bloatware from VDF Romania and french operator Jeux wasn't a issue of incorrect files. After all exercises i back to original EE soft.
All that with LG UP. I tried to use uppercut but my antivirus report as well on this so I don't bother and just use LG up.
konio25 said:
Hi,
I used version 1.14.3 (apparently this is the latest).
I flashed my g5 H850 several times as I wasn't sure if this bloatware from VDF Romania and french operator Jeux wasn't a issue of incorrect files. After all exercises i back to original EE soft.
All that with LG UP. I tried to use uppercut but my antivirus report as well on this so I don't bother and just use LG up.
Click to expand...
Click to collapse
Thank you.
Did you use the LG UP from here: https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Because I that's the version I used but unfortunately on my PC it cannot detect my phone.
I'm not sure from where I downloaded, when I was looking for latest version I just search through google. Are you sure you have all drivers installed? Did you plug in your phone in download mode?
konio25 said:
Did you plug in your phone in download mode?
Click to expand...
Click to collapse
Ah - helpful tip! Because of the other messing around I'd been doing, it was in debug mode, D'oh I've got further, but still baulking.
From other threads re. XP and VMs, I found I needed to install an XP USB 3 driver, and switch to a USB virtual port in the VM. With all that, launching LGUP 1.14 via Uppercut the phone is detected and I can start an upgrade process.
It reboots the phone, which then displays the Firmware Update screen, but stays resolutely on 0%. LGUP shows "Build : U" as the step with progress at 4%. After 11 minutes it times out with a popup saying "Error: 0x2000 [ERROR] RX Timeout : 3.0". The barely readable little console window on the phone starts off with some info about the phone, then changes to simply "633E 1B00" after a couple of minutes.
I've tried using both physical USB 2 & USB 3 ports on the PC.
Any ideas?
Thks
Try to use lg up without uppercut, maybe your pc is a bit slow on vm. Once i startet flashing with lg up the whole process take about 5 min. Do you have hdd or ssd on your pc? Also check if there is no restriction for vm regarding size, make sure drive space is big enough. Also try to assign at least 2gb of ram for vm and if you have multi core cpu try to assign at least two cores. I believe if you will tweak settings on your vm it should be good to go. Check for vm tools update if needed update to latest.
LGUP without Uppercut doesn't work, it won't recognise the device. That's the only reason I downloaded Uppercut to start with.
I'm pretty convinced it's a USB connectivity problem. When the phone reboots there's no USB, then the USB interface comes up again, and LGUP has to continue talking to it in firmware-update mode. There are issues with the way the USB device is being captured by the VM. For some reason the MTP interface is still exposed to the host even though VBox says it's captured by the guest. In VBox terms this shouldn't happen, an interface is either accessible to the host, or is mapped to the guest and invisible to the host.
MTP is a bit of a weird beast though, and I think there's some black magic going on with the way this Linux (Ubuntu 18.04) is grabbing MTP devices. I've been trying to turn off every rule relating to Vendor 1004, Device 633e, as well as defaults, but it still has some magic default that means it spots an MTP device. I'm sure this is blocking proper communication through to the XP guest OS.
I shall keep tinkering ...
Well, I got it to work! I could not stop the host from seeing the USB interface, no mater how much of MTP I disabled, but the solution was to disconnect and re-connect the USB device to the VM, after the phone rebooted into flashing mode and LGUP was waiting to re-connect. I did it a couple of times, second time the connection to LGUP succeeded, and flashing completed in 3 - 4 mins.
Well that's it done on my spare slightly-broken test phone - I collect these things! - (took it from AOS 6 to 8), now to take a deep breath and do it on my real device I depend on. Time to back everything up again
Hi, i got lg g6 h873 before i could get calld and test messages but after reset i got a message service data blocked. I cant get the apn configuration. I even replace sim card. I already tried the phone information but ibcant turn off radio cause the application is not supported on this device.
Also, how to update without computer if its possible, as it says not registered on software update. Cannot find proper solution.