Hi
Does anyone have the single sim oemino image for the European C432 device. I have an ee specific UK variant and would like to change to the generic European firmware. I have an ANE-LX1 L01
Thanks
Anyone?
Sent from my Huawei P20 Lite using XDA Labs
sykomaniac said:
Hi
Does anyone have the single sim oemino image for the European C432 device. I have an ee specific UK variant and would like to change to the generic European firmware. I have an ANE-LX1 L01
Thanks
Click to expand...
Click to collapse
Enjoy it!
Thank you!
Sent from my Huawei P20 Lite using XDA Labs
kilroystyx said:
Enjoy it!
Click to expand...
Click to collapse
@kilroystyx Thanks for the file!
I've tried to copy the oeminfo parition using dd (the exact command is below)
Code:
dd if=/sdcard/Download/oeminfo of=/dev/block/platform/hi_mci.0/by-name/oeminfo
It appears to copy fine and I am able to reboot back to the system. However, the build number still states
Code:
8.0.0.046(0M7A)
.
Furthermore when I run:
Code:
getprop ro.hw.custPath
it still reports
Code:
/cust/ee/gb
Also
Code:
fastboot getvar vendorcountry
reports
Code:
vendorcountry: ee/gb
Any ideas what I've done wrong?
Do I need to perform a clean install after restoring the oeminfo partition?
sykomaniac said:
@kilroystyx Thanks for the file!
I've tried to copy the oeminfo parition using dd (the exact command is below)
Code:
dd if=/sdcard/Download/oeminfo of=/dev/block/platform/hi_mci.0/by-name/oeminfo
It appears to copy fine and I am able to reboot back to the system. However, the build number still states
Code:
8.0.0.046(0M7A)
.
Furthermore when I run:
Code:
getprop ro.hw.custPath
it still reports
Code:
/cust/ee/gb
Also
Code:
fastboot getvar vendorcountry
reports
Code:
vendorcountry: ee/gb
Any ideas what I've done wrong?
Do I need to perform a clean install after restoring the oeminfo partition?
Click to expand...
Click to collapse
Code:
dd if=/sdcard/Download/oeminfo.img of=/dev/block/platform/hi_mci.0/by-name/oeminfo
Add file extension img to oeminfo and try again.
If doesn't work I'll prepare a TWRP backup and then you can restore.
@kilroystyx NVM turns out I must have copied my backed-up oeminfo partition to my device by mistake - hence no change.
FYI for anyone that uses this method it relocks your bootloader (minor panic when my device refused to boot)! I also performed a factory reset - not sure if this required but probably worth backing up your files just incase...
kilroystyx said:
Code:
dd if=/sdcard/Download/oeminfo.img of=/dev/block/platform/hi_mci.0/by-name/oeminfo
Add file extension img to oeminfo and try again.
If doesn't work I'll prepare a TWRP backup and then you can restore.
Click to expand...
Click to collapse
Hello, can u upload a twrp backup of that oeminfo
Here you go. This is untested!
sykomaniac said:
Here you go. This is untested!
Click to expand...
Click to collapse
Ignore one of the uploads didn't mean to attach it! You need the one labeled oem
Pleasse dual sim, el oeminfo c432
Ayudame necesito el dual sim osea oeinfo dual sim pero zip para twrp
kilroystyx said:
enjoy it!
Click to expand...
Click to collapse
posedys said:
Ayudame necesito el dual sim osea oeinfo dual sim pero zip para twrp
Click to expand...
Click to collapse
Check this oeminfo
kilroystyx said:
Check this oeminfo
Click to expand...
Click to collapse
Tú sí graciasss
Enviado desde mi ANE-LX3 mediante Tapatalk
---------- Post added at 02:16 PM ---------- Previous post was at 02:11 PM ----------
kilroystyx said:
Check this oeminfo
Click to expand...
Click to collapse
Vamos a probar ojalá me dé el 4 g gracias x el archivo
Enviado desde mi ANE-LX3 mediante Tapatalk
---------- Post added at 02:17 PM ---------- Previous post was at 02:16 PM ----------
sykomaniac said:
Here you go. This is untested!
Click to expand...
Click to collapse
Disculpa uno es el oeminfo?? De qué versión y el otro?? Que archivo es o para que sirve?
Enviado desde mi ANE-LX3 mediante Tapatalk
Sorry my friend I only speak English
Related
How to remove camera sound? Thanks.
U can install camera sound app from the playstore and then u can off the camera sound
Press thanks if u find it helpful
Sent from my GT-I9082 using xda app-developers app
gurpreetmaster said:
U can install camera sound app from the playstore and then u can off the camera sound
Press thanks if u find it helpful
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
It didn't work... any ideas?
pedromsouza said:
It didn't work... any ideas?
Click to expand...
Click to collapse
Try to change the camera sound .ogg to a .ogg without a sound
zanini007 said:
Try to change the camera sound .ogg to a .ogg without a sound
Click to expand...
Click to collapse
How do you do that? Where is this file?
pedromsouza said:
How do you do that? Where is this file?
Click to expand...
Click to collapse
/system/media/audio (some app show it "ui" instead of audio)
to remove the "shot" sound of camera, you need to change the camera_click.ogg (and Camera_click_short.ogg if necessary) to a empty audio file, so i will attach one here for you.
PS: this is permanent, you will need a backup of the file if you want to come back
Edit:
You can also just mute your phone
zanini007 said:
/system/media/audio (some app show it "ui" instead of audio)
to remove the "shot" sound of camera, you need to change the camera_click.ogg (and Camera_click_short.ogg if necessary) to a empty audio file, so i will attach one here for you.
PS: this is permanent, you will need a backup of the file if you want to come back
Edit:
You can also just mute your phone
Click to expand...
Click to collapse
Thanks for the help. When I try to replace the file it says "can't overwrite, read-only file". Do you know how to fix it?
pedromsouza said:
Thanks for the help. When I try to replace the file it says "can't overwrite, read-only file". Do you know how to fix it?
Click to expand...
Click to collapse
mount as R/w
Zanini, could you explain how to do it in portuguese?
Enviado de meu GT-I8552B usando Tapatalk
pedromsouza said:
Zanini, could you explain how to do it in portuguese?
Enviado de meu GT-I8552B usando Tapatalk
Click to expand...
Click to collapse
Here it goes:
2 formas:
1- Troque o arquivo de som de disparo da câmera "camera_click.ogg" (e o Camera_click_short.ogg se precisar) pelo arquivo de som que upei ali que não tem som algum. Se der o erro de "can't overwrite, read-only file" monte a unidade como R/W (fácil de fazer pelo Root Explorer). Os arquivos estão no diretório: /system/media/audio/ui
2- Coloque o celular no silencioso, a câmera não fará sons no modo silencioso.
Obrigado!!
Enviado de meu GT-I8552B usando Tapatalk
I have a Nextbook Ares 8A NX16A8116k, it wont boot in to recovery mode and keeps going to boot manager screen. The secure boot and bootloader are disabled. what do i do or how can i fix it? Please help
ANBdeadpool said:
I have a Nextbook Ares 8A NX16A8116k, it wont boot in to recovery mode and keeps going to boot manager screen. The secure boot and bootloader are disabled. what do i do or how can i fix it? Please help
Click to expand...
Click to collapse
did yo ever find a fix for this
Jimmy2526 said:
did yo ever find a fix for this
Click to expand...
Click to collapse
No i haven't been able to yet and my friend has it right now to see if he can get it fixed but so far no luck yet, Sorry.
Ares 8A no OS
Hi, friends i have Ares 8A NX16A8116K PB
By Accidentally deleted system file while installing TWRP/root.
I can access TWRP but no OS. Have no system backup file.
Looking for STOCK OS or equal OS that can be installed through TWRP.
I have tried all related forum custom ROM but no success.
I have stock imgs i took but mine is bricked too. I can get to bios with OTG + keyboard. But all partitions were deleted to install Lubuntu (isn't great). I'll upload my .imgs if it helps. If you can get yours going, would you help get mine going? I think I'd need a "dd" of your entire /dev/block/mmcblk0.
Uploading img's now.
Ares10a_NXM1021CAP_ES-IntelAtom-[NX16A10132SP-S] - Google Drive
drive.google.com
Here these are. I can't say at all for sure whether these will do any good, but they're there.
I haven't yet uploaded the "android_system.img" or "android_data.img" yet because they're huge. Take forever for my microwave to upload. They'll be up soon though!
CornholeOS_x86 said:
Ares10a_NXM1021CAP_ES-IntelAtom-[NX16A10132SP-S] - Google Drive
drive.google.com
Aquí están estos. No puedo decir con certeza si estos servirán de algo, pero están ahí.
Todavía no he subido "android_system.img" o "android_data.img" porque son enormes. Mi microondas tarda una eternidad en cargar. ¡Sin embargo, estarán listos pronto!
Click to expand...
Click to collapse
Saludos hermano me acabo de registrar porque necesito ayuda con el Software o ROM de la Tablet Nextbook modelo: NX16A8116KPB, me podrías ayudar por favor
Hello guys, I'm new here and I apologize if I have done something wrong, I do not understand much how the rules work. I bought a huawei mate 10 Pro C605 Latin American and realized that the updates are more time consuming than in other versions and would like the help of all of how to change the region / rebrand to another that has Portuguese language brazil. thanks
andersonfariah said:
Hello guys, I'm new here and I apologize if I have done something wrong, I do not understand much how the rules work. I bought a huawei mate 10 Pro C605 Latin American and realized that the updates are more time consuming than in other versions and would like the help of all of how to change the region / rebrand to another that has Portuguese language brazil. thanks
Click to expand...
Click to collapse
I have the same question.. mine is still at 126 version. Saw at the firmware finder that already exists the 133 version... Tried but is not installin at all..
mbscardoso said:
I have the same question.. mine is still at 126 version. Saw at the firmware finder that already exists the 133 version... Tried but is not installin at all..
Click to expand...
Click to collapse
My mate 10 pro was the same, but you can upgrade to version 132, the 133 is not available yet.
História guys, I'm Brazilian user and i have the same version bla-L29 8.0.0.126. My mate 10 Pro does not update to any version. In FF no version appears as approved for download (132,132sp1,133 etc) .
Tried to update again, and there is no firmware approved to me other than 126, which is already installed...
---------- Post added at 10:55 PM ---------- Previous post was at 10:53 PM ----------
andersonfariah said:
My mate 10 pro was the same, but you can upgrade to version 132, the 133 is not available yet.
Click to expand...
Click to collapse
Tried again and checked all new firmware newer than mine (126), and none of them is approved to me...
mbscardoso said:
Tried to update again, and there is no firmware approved to me other than 126, which is already installed...
---------- Post added at 10:55 PM ---------- Previous post was at 10:53 PM ----------
Tried again and checked all new firmware newer than mine (126), and none of them is approved to me...
Click to expand...
Click to collapse
Does anyone know when the C605 version will have the face unlock? I'm Brazilian too.
mbscardoso said:
Tried to update again, and there is no firmware approved to me other than 126, which is already installed...
---------- Post added at 10:55 PM ---------- Previous post was at 10:53 PM ----------
Tried again and checked all new firmware newer than mine (126), and none of them is approved to me...
Click to expand...
Click to collapse
That's strange. Today 11/4/2018 updated to version 133, look at yours.
andersonfariah said:
My mate 10 pro was the same, but you can upgrade to version 132, the 133 is not available yet.
Click to expand...
Click to collapse
I have no idea... I miss this feature too, once my previous device was a oneplus 5, and oneplus implemented it really quickly in the oxygen OS....
There are some people saying that Huawei is going to improve its work on the c605 because devices which are being sold in the USA are also c605... So, in order to build a good image there, updates would become quicker than nowadays... But, this is not official..
And what is the version of the firmware in your Huawei?
mbscardoso said:
i have no idea... I miss this feature too, once my previous device was a oneplus 5, and oneplus implemented it really quickly in the oxygen os....
There are some people saying that huawei is going to improve its work on the c605 because devices which are being sold in the usa are also c605... So, in order to build a good image there, updates would become quicker than nowadays... But, this is not official..
And what is the version of the firmware in your huawei?
Click to expand...
Click to collapse
bla-l29 8.0.0.133 c605
No way... Not working here... See, please, the attachments..
mbscardoso said:
No way... Not working here... See, please, the attachments..
Click to expand...
Click to collapse
Same here, but the verification without IMEI pops up firmware approved. No use because we can only install when it is approved by IMEI. ??
Yes... Waiting here for Huawei good willing.. Latin America always forgotten.. : (... Kkk
Now 133 approved. BLA-L09 C605
That's good! Mine is L29 C605 and yesterday was approved to me firmware 132! Finally! Just 133 installed not approved yet!
mbscardoso said:
That's good! Mine is L29 C605 and yesterday was approved to me firmware 132! Finally! Just 133 installed not approved yet!
Click to expand...
Click to collapse
same phone here Brazilian friends ...BLA-L29 8.0.0.1.126 (C605) Tried all 133 OTA as i wont configure the phone again by now ... everything worked like a charm till reboot and gave file check error, and turned back to the stock one .126!
anyone got the 133 working? Oh in the FF there is no more option for looking with or without IMEI .. i think that IMEI is default by now!
rioferraz said:
Now 133 approved. BLA-L09 C605
Click to expand...
Click to collapse
felipy2k said:
same phone here Brazilian friends ...BLA-L29 8.0.0.1.126 (C605) Tried all 133 OTA as i wont configure the phone again by now ... everything worked like a charm till reboot and gave file check error, and turned back to the stock one .126!
anyone got the 133 working? Oh in the FF there is no more option for looking with or without IMEI .. i think that IMEI is default by now!
Click to expand...
Click to collapse
Here, just 132 working... And working really good. I Felt a good improvement in battery life... 133 is not approved for my IMEI..
mbscardoso said:
Here, just 132 working... And working really good. I Felt a good improvement in battery life... 133 is not approved for my IMEI..
Click to expand...
Click to collapse
só tem Brasileiro nesse tópico pelo jeito! OTA ou Full? tem como me mostrar qual delas vc tentou?
There's only one Brazilian in this thread by the way! OTA or Full? Can you show me which one you tried?
felipy2k said:
só tem Brasileiro nesse tópico pelo jeito! OTA ou Full? tem como me mostrar qual delas vc tentou?
There's only one Brazilian in this thread by the way! OTA or Full? Can you show me which one you tried?
Click to expand...
Click to collapse
Kkkk... Só os Brazucas esquecidos pela Huawei... Kkk. Foi a full Ota... Me recomendaram que fizessem sempre isso.. Coloquei em anexo o número do firmware.. Lembrando que o meu é o Mate 10 pro L29 C605...
Kkkk... Only the Brazilians forgotten by Huawei... Kkk. It was the full Ota... They recommended that they always do this .. I attached the firmware number .. Remembering that mine is the Mate 10 pro L29 C605...
mbscardoso said:
Kkkk... Só os Brazucas esquecidos pela Huawei... Kkk. Foi a full Ota... Me recomendaram que fizessem sempre isso.. Coloquei em anexo o número do firmware.. Lembrando que o meu é o Mate 10 pro L29 C605...
Kkkk... Only the Brazilians forgotten by Huawei... Kkk. It was the full Ota... They recommended that they always do this .. I attached the firmware number .. Remembering that mine is the Mate 10 pro L29 C605...
Click to expand...
Click to collapse
O meu é o mesmo ...consegui a 132 e agora quando restartou pediu para atualizar para 133 automaticamente! esta atualizando ! puto da vida pq vi que o P20 pro esta o mesmo valor que paguei nesse Mate 10 pro!
manda atualizar o seu que deve vir a 133! is updating !
Mine is the same ... I got the 132 and now when restarted it asked to update to 133 automatically! puto of life because I saw that the P20 pro is the same value that I paid in this Mate 10 pro!
send your update that should come to 133! is updating !
felipy2k said:
O meu é o mesmo ...consegui a 132 e agora quando restartou pediu para atualizar para 133 automaticamente! esta atualizando ! puto da vida pq vi que o P20 pro esta o mesmo valor que paguei nesse Mate 10 pro!
manda atualizar o seu que deve vir a 133!
Mine is the same ... I got the 132 and now when restarted it asked to update to 133 automatically! puto of life because I saw that the P20 pro is the same value that I paid in this Mate 10 pro!
send your update that should come to 133! is updating !
Click to expand...
Click to collapse
Mandei atualizar aqui e apareceu a 133... Medo de detonar a bateria.... Depois que botei a 132 a bateria ficou massa demais... Kkk. Tou baixando aqui.. Vamos ver
Tbm tou de olho no p20 pro... Coçando aqui para comprar.. Kkk... E tou com este mate 10 pro há 10 dias... Derrota.. Kkk
I had to update here and it appeared to 133 ... Fear of detonating the battery .... After I put the battery the 132 became too much mass ... Kkk. I'm downloading it here ... Let's see
I have an eye on the p20 pro ... Scratching here to buy .. Kkk ... I've been with this mate 10 pro for 10 days ... Defeat .. Kkk
Hello, any tutorial on how to root Samsung Galaxy A02 SM-A022M?
did you achieve some bro?
I tried with adb and fastboot with the oem unlock command to be able to flash, but it does not work. By the way I did not find TWRP support for this model, another recovery is needed to be able to install. I wanted to try eftsu, but I can't modify the bootloader. Apparently root can't be done. Help
mezca said:
did you achieve some bro?
I tried with adb and fastboot with the oem unlock command to be able to flash, but it does not work. By the way I did not find TWRP support for this model, another recovery is needed to be able to install. I wanted to try eftsu, but I can't modify the bootloader. Apparently root can't be done. Help
Click to expand...
Click to collapse
Samsung models doesn't had Fastboot mode but you can check the OEM Unlock in developer options (I tink is available on my A022M with android R)
At this moment due to the chipset (MT6739W) we can't see twrp for now (I had another model with same chipset and those model doesn't had twrp it's a moto e 6 play)
And a permanently root for now is not possible but temporary root can work I tink Temp root for MTK ArmV8
MauriJ2001 said:
Samsung models doesn't had Fastboot mode but you can check the OEM Unlock in developer options (I tink is available on my A022M with android R)
At this moment due to the chipset (MT6739W) we can't see twrp for now (I had another model with same chipset and those model doesn't had twrp it's a moto e 6 play)
And a permanently root for now is not possible but temporary root can work I tink Temp root for MTK ArmV8
Click to expand...
Click to collapse
mtk-su will not work, the phone is too new
your best bet will be this tool but it hasnt really been tested against samsungs https://github.com/bkerler/mtkclient
Plis saya mohon untuk bisa membuka root
Translated by GT: Pls I beg to be able to open root
Olá, tenho um SM-022M, fiz o root usando o magisk+Odin, não usei o TWRP. Caso ainda não tenhe encontrado solução posso postar o tutorial que segui.
(Hi, I have an SM-022M, I rooted it using magisk+Odin, I didn't use TWRP. If you still haven't found a solution, I can post the tutorial I followed.)
xphuser said:
Olá, tenho um SM-022M, fiz o root usando o magisk+Odin, não usei o TWRP. Caso ainda não tenhe encontrado solução posso postar o tutorial que segui.
(Hi, I have an SM-022M, I rooted it using magisk+Odin, I didn't use TWRP. If you still haven't found a solution, I can post the tutorial I followed.)
Click to expand...
Click to collapse
Eu gostaria demais de saber como você fez! rs
Translated by GT: I would love to know how you did it! LOL
Se após gravar o novo boot.img o sistemas estiver entrando em bloqueio, é provável que o boot loader esteja bloqueado.
Certifique-se que bootloader estaja unlock.
Translated by GT:
If after writing the new boot.img the system is going into lock, it is likely that the boot loader is locked.
Make sure bootloader is unlocked.
Greetings to all. Just a friendly reminder about XDA Rule #4:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you: Badger50 FSM
Hello friend,has your problem been resolved?
I tried everything to Root SM-A022F/DS
im using mac pro, so the Odin options wont work , using CLI via ADB doesn't work
Also what is the custom ROM/firmware for this device SM-A022F/DS over android 11 ?
----------------------- ------------------------------
Ola pessoal, tudo bem?
Procurei em dezenas de lugares, como recuperar meu celular com firmware / bootloader / etc... tudo zuado...
Nâo importa o que você fez no celular.
Se o boot no modo fast do seu celular tiver funcionando (segura Volume '-' junto botâo de ligar ) isto vai funcionar para você.
1- Baixe o arquivo 'motog7-recovery.zip' ( ja tem os '.img', adb.exe, fastboot.exe, etc.. )
2- Descompacte ele em uma pasta simples (ex. 'C:\motog7')
2- Execute o arquivo 'flashfile.bat' e espere (pode demorar). (Ele reinicia sozinho)
Boa sorte pessoal!
----------------------- -------------------------------
Hello everyone, everything good?
I looked in dozens of places, how to recover my phone with firmware / bootloader / etc... all messed up...
It doesn't matter what you did on your cell phone.
If your phone's fast mode booting is working (hold Volume '-' next to power button ) this will work for you.
1- Download the 'motog7-recovery.zip' file (you already have the '.img', adb.exe, fastboot.exe, etc..)
2- Unzip it into a simple folder (eg 'C:\motog7')
2- Run the 'flashfile.bat' file and wait (may take a while). (It resets itself)
Good luck guys!
-----------------------
Link to Download:
NOVO_LINK
No link to file mate
imarsh72 said:
No link to file mate
Click to expand...
Click to collapse
The file is big.. i tryng to upload in another site. =S
Link: NOVO_LINK
Hi there, @heitor.mejias File is still missing. Will you upload it again?
And, could you tell me if is there any specification about the phone we should know?
Hellmetal666 said:
Hi there, @heitor.mejias File is still missing. Will you upload it again?
And, could you tell me if is there any specification about the phone we should know?
Click to expand...
Click to collapse
Sorry, the old site removed my file... now, you can download forever =)
New link to download:
NEW_LINK
Hellmetal666 said:
Hi there, @heitor.mejias File is still missing. Will you upload it again?
And, could you tell me if is there any specification about the phone we should know?
Click to expand...
Click to collapse
Sorry, the old site removed my file... now, you can download forever =)
New link to download:
NEW_LINK
Hello all, just head over to motostockrom.com, there's plenty of different versions to download both android 9 and 10. Just recovered mine when i lost touch in twrp. Same as above just run .bat file in Windows, easy
Hello, someone can help me? I need this file, someone still have it? Or know somewhere else I can download it
NickSimer said:
Hello, someone can help me? I need this file, someone still have it? Or know somewhere else I can download it
Click to expand...
Click to collapse
I've just restored mine from this thread
https://forum.xda-developers.com/t/guide-relock-bootloader-should-work-in-all-versions.4057497/.
The one I used previously didn't relock bootloader and i couldn't lock it by fastboot either