full brick - Motorola One Questions & Answers

good day!
install android 9 and try to return to oreo but now not turn on my cell only the led notifications and I need the blank flash to be able to make it minimum in recovery
Can someone help me please?

Reflash android Pie

borksek said:
Reflash android Pie
Click to expand...
Click to collapse
I need the blank flash to boot the bootloader

victoor57 said:
good day!
install android 9 and try to return to oreo but now not turn on my cell only the led notifications and I need the blank flash to be able to make it minimum in recovery
Can someone help me please?
Click to expand...
Click to collapse
Same issue here :fingers-crossed:
Blinking LED and QDLoader. No fastboot.

I had exactly the same an hour ago, don't worry it'll be okay.
Download the Android 9.0 Firmware from here: https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
(I'd suggest using JDownloader, because the mirror is not very reliable)
After the download finished unpack the archive and move the files to the path where adb.exe and fastboot.exe are located. Then start Minimal Adb and Fastboot and enter the commands listed here: https://forum.xda-developers.com/mo...-pie-stock-t3863985/post78287372#post78287372
You're device should be unbricked and Android 9.0 should be installed.

Polyparadox said:
I had exactly the same an hour ago, don't worry it'll be okay.
Download the Android 9.0 Firmware from here: https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
(I'd suggest using JDownloader, because the mirror is not very reliable)
After the download finished unpack the archive and move the files to the path where adb.exe and fastboot.exe are located. Then start Minimal Adb and Fastboot and enter the commands listed here: https://forum.xda-developers.com/mo...-pie-stock-t3863985/post78287372#post78287372
You're device should be unbricked and Android 9.0 should be installed.
Click to expand...
Click to collapse
Well, that won't work as it can't boot to fastboot. It's only Qualcomm download mode so we need a blank flash for XT1941 to even get to fastboot.
How to Fix Motorola Hard Bricked Devices in Qualcomm Bulk Mode

Oh I then misunderstood. Is there any way I can help?

Polyparadox said:
Oh I then misunderstood. Is there any way I can help?
Click to expand...
Click to collapse
Thanks for asking, but there isn't much to do unfortunatly. I'll just keep my eyes open for a blank flash.

tys0n said:
Thanks for asking, but there isn't much to do unfortunatly. I'll just keep my eyes open for a blank flash.
Click to expand...
Click to collapse
Could you please tell something here if you even know something about the blank flash? i have a Moto One bricked adn i want to repair it.
Thanks.

lujaberdo said:
Could you please tell something here if you even know something about the blank flash? i have a Moto One bricked adn i want to repair it.
Thanks.
Click to expand...
Click to collapse
Motorola is scared to release blank flash

victoor57 said:
good day!
install android 9 and try to return to oreo but now not turn on my cell only the led notifications and I need the blank flash to be able to make it minimum in recovery
Can someone help me please?
Click to expand...
Click to collapse
hi
Can you solve this? I have the same problem?

Could they fix it?

victoor57 said:
Could they fix it?
Click to expand...
Click to collapse
Did you fix yours? I saw this thread and went and grabbed a blank flash from Erfan. If you need it I'll upload it. He said some users reported it not working. But at this point it can't hurt anything since it's already bricked

I've tried to make a few singleimage.bin's with various programmer.mbn for MSM8953 which was also signed by motorola, packed together with the files that I extracted from our bootloader.img and edited xml's to match our files.
All together:
1 130 md5:da6b7628c3a26020d4900b8c18090a03 index.xml
2 262144 md5:ccd35832780f2522f6c68fe262d41b68 rpm.mbn
3 1835008 md5:20768312f833ad79dbdc963cfd3e30ac tz.mbn
4 65536 md5:ad7613fd144242cd0170006ac2198f35 devcfg.mbn
5 1043584 md5:2b87f7a135ffdffd49264089df010720 keymaster.mbn
6 1043584 md5:5d892221f1ab0367bab8d02e877f0aec cmnlib.mbn
7 1043584 md5:2c7956dcd97fffcc2ea81a69099abe2e cmnlib64.mbn
8 191616 md5:a7d33a8d04152b6c776f2d61537c8efb prov.mbn
9 519296 md5:ce6030a89013fd6604653173994f3805 sbl1.mbn
10 1572864 md5:526fc6b39fdb822973c073d109b3d359 emmc_appsboot.mbn
11 46592 md5:2a441bab6d0a3c87f1dec1d6fcda5baf gpt_main0.bin
12 1004 md5:c8cf156802c32589e78bf891d1b418dd singleimage.default.xml
13 322924 md5:88aff02fc7a353427d460f7525892530 prog_emmc_firehose_8953_ddr_motorola.mbn
14 133 md5:61b99c29637ba47bde80c66757ad6c3f singleimage.pkg.xml
Unfortunately they all fail.
I've looked at programmer.mbn for "chef" as an example, and it seems like it's specific for A/B partitioning.
We probably need a programmer.mbn for msm8953 with A/B partitioning and afaik, Motorola One is the only one with that configuration.
This is as far as I got. and the log is with debug option enabled in qboot.
It communicates with device, sends the programmer, gets recipe, but gets stuck on "Configuring device". Probably cause of wrong programmer since it's not for A/B.
Code:
**** Log buffer [000001] 2019-04-09_16:56:41 ****
[ -0.000] Opening device: \\.\COM17
[ -0.000] Opening serial device: \\.\COM17
[ 0.001] Detecting device
[ 0.001] Switching to command mode
[ 0.001] Receiving HELLO packet
[ 0.001] ...protocol version: 2
[ 0.001] ...compatible with: 1
[ 0.001] ...max. packet size: 1024
[ 0.001] ...current mode: Image transfer pending
[ 0.001] Sending HELLO_RESP packet
[ 0.002] Receiving COMMAND_READY packet
[ 0.002] Identifying device
[ 0.002] Reading CPU serial number
[ 0.002] Sending CMD_EXEC packet, cmd=CMD_READ_SN
[ 0.002] Receiving CMD_EXEC_RESP packet
[ 0.002] ...payload: 4 byte(s)
[ 0.002] Receiving payload
[ 0.003] Reading CPU id
[ 0.003] Sending CMD_EXEC packet, cmd=CMD_READ_HWID
[ 0.003] Receiving CMD_EXEC_RESP packet
[ 0.003] ...payload: 24 byte(s)
[ 0.003] Receiving payload
[ 0.003] Reading SBL SV
[ 0.003] Sending CMD_EXEC packet, cmd=CMD_READ_SV_SBL
[ 0.004] Receiving CMD_EXEC_RESP packet
[ 0.004] ...payload: 4 byte(s)
[ 0.004] Receiving payload
[ 0.004] Reading debug data
[ 0.004] Sending CMD_EXEC packet, cmd=CMD_READ_DEBUG_DATA
[ 0.004] Receiving CMD_EXEC_RESP packet
[ 0.005] ...payload: 256 byte(s)
[ 0.005] Receiving payload
[ 0.005] Debug data dump follows
[ 0.005] 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
[ 0.005] *
[ 0.005] ...cpu.id = 70 (0x46)
[ 0.006] ...cpu.sn = 1113427738 (0x425d8f1a)
[ 0.006] Opening singleimage
[ 0.007] Loading package
[ 0.008] ...filename = singleimage.pkg.xml
[ 0.010] Loading programmer
[ 0.011] ...filename = programmer.mbn
[ 0.011] Sending programmer
[ 0.012] Switching to image download mode
[ 0.012] Sending CMD_SWITCH_MODE packet
[ 0.012] Receiving HELLO packet
[ 0.013] ...protocol version: 2
[ 0.013] ...compatible with: 1
[ 0.013] ...max. packet size: 1024
[ 0.013] ...current mode: Image transfer pending
[ 0.014] Sending HELLO_RESP packet
[ 0.014] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.014] Sending 52 bytes
[ 0.014] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.015] Sending 288 bytes
[ 0.015] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.015] Sending 4096 bytes
[ 0.015] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.016] Sending 2632 bytes
[ 0.017] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.031] Sending 4096 bytes
[ 0.032] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.032] Sending 4020 bytes
[ 0.033] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.034] Sending 4096 bytes
[ 0.034] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.035] Sending 2096 bytes
[ 0.035] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.036] Sending 4096 bytes
[ 0.036] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.037] Sending 4096 bytes
[ 0.037] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.038] Sending 4096 bytes
[ 0.038] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.039] Sending 4096 bytes
[ 0.039] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.040] Sending 4096 bytes
[ 0.041] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.042] Sending 4096 bytes
[ 0.047] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.048] Sending 4096 bytes
[ 0.048] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.049] Sending 4096 bytes
[ 0.049] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.050] Sending 4096 bytes
[ 0.050] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.051] Sending 4096 bytes
[ 0.052] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.052] Sending 4096 bytes
[ 0.053] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.054] Sending 4096 bytes
[ 0.054] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.055] Sending 4096 bytes
[ 0.055] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.056] Sending 4096 bytes
[ 0.056] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.057] Sending 4096 bytes
[ 0.057] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.058] Sending 4096 bytes
[ 0.058] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.063] Sending 4096 bytes
[ 0.064] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.065] Sending 4096 bytes
[ 0.065] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.066] Sending 4096 bytes
[ 0.066] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.067] Sending 4096 bytes
[ 0.067] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.068] Sending 4096 bytes
[ 0.068] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.069] Sending 4096 bytes
[ 0.070] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.070] Sending 4096 bytes
[ 0.071] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.072] Sending 4096 bytes
[ 0.073] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.073] Sending 4096 bytes
[ 0.074] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.075] Sending 4096 bytes
[ 0.075] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.076] Sending 4096 bytes
[ 0.079] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.080] Sending 4096 bytes
[ 0.080] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.081] Sending 4096 bytes
[ 0.082] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.083] Sending 4096 bytes
[ 0.083] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.084] Sending 4096 bytes
[ 0.084] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.085] Sending 4096 bytes
[ 0.085] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.086] Sending 4096 bytes
[ 0.086] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.087] Sending 4096 bytes
[ 0.087] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.088] Sending 4096 bytes
[ 0.089] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.089] Sending 4096 bytes
[ 0.091] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.092] Sending 4096 bytes
[ 0.092] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.097] Sending 4096 bytes
[ 0.097] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.098] Sending 4096 bytes
[ 0.098] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.099] Sending 4096 bytes
[ 0.099] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.100] Sending 4096 bytes
[ 0.101] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.101] Sending 4096 bytes
[ 0.102] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.103] Sending 4096 bytes
[ 0.103] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.104] Sending 4096 bytes
[ 0.104] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.105] Sending 4096 bytes
[ 0.105] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.106] Sending 4096 bytes
[ 0.106] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.107] Sending 4096 bytes
[ 0.108] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.108] Sending 4096 bytes
[ 0.110] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.110] Sending 4096 bytes
[ 0.113] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.114] Sending 4096 bytes
[ 0.114] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.115] Sending 4096 bytes
[ 0.116] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.116] Sending 4096 bytes
[ 0.117] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.118] Sending 4096 bytes
[ 0.118] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.119] Sending 4096 bytes
[ 0.120] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.121] Sending 4096 bytes
[ 0.121] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.122] Sending 4096 bytes
[ 0.122] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.123] Sending 4096 bytes
[ 0.123] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.124] Sending 4096 bytes
[ 0.124] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.125] Sending 4096 bytes
[ 0.125] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.126] Sending 4096 bytes
[ 0.131] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.132] Sending 4096 bytes
[ 0.132] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.133] Sending 4096 bytes
[ 0.133] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.134] Sending 4096 bytes
[ 0.135] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.135] Sending 4096 bytes
[ 0.136] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.137] Sending 1968 bytes
[ 0.137] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.137] Sending 4096 bytes
[ 0.138] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.139] Sending 4096 bytes
[ 0.139] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.140] Sending 4096 bytes
[ 0.141] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.142] Sending 4096 bytes
[ 0.142] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.147] Sending 4096 bytes
[ 0.147] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.148] Sending 4096 bytes
[ 0.148] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.149] Sending 4096 bytes
[ 0.150] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.150] Sending 4096 bytes
[ 0.151] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.152] Sending 2104 bytes
[ 0.152] Receiving READ_DATA, READ_DATA_64, or END_IMAGE_TX packet
[ 0.259] Sending DONE packet
[ 0.259] Receiving DONE_RESP packet
[ 0.262] Handling things over to programmer
[ 0.264] Identifying CPU version
[ 0.265] Waiting for firehose to get ready
[ 3.267] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[ 5.770] Opening serial device: \\.\COM17
[ 15.771] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[ 15.962] ReadFile() failed, GetLastError()=0
[ 26.473] Opening serial device: \\.\COM17
[ 26.975] Opening serial device: \\.\COM17
[ 27.477] Opening serial device: \\.\COM17
[ 27.978] Opening serial device: \\.\COM17
[ 28.480] Opening serial device: \\.\COM17
[ 28.980] Opening serial device: \\.\COM17
[ 29.481] Opening serial device: \\.\COM17
[ 29.982] Opening serial device: \\.\COM17
[ 30.482] Opening serial device: \\.\COM17
[ 30.983] Opening serial device: \\.\COM17
[ 30.984] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[ 42.495] Opening serial device: \\.\COM17
[ 42.497] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[ 54.011] Opening serial device: \\.\COM17
[ 54.013] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[ 65.024] Waiting for firehose to get ready
[ 68.025] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[ 79.537] Opening serial device: \\.\COM17
[ 79.539] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[ 91.051] Opening serial device: \\.\COM17
[ 91.058] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[102.572] Opening serial device: \\.\COM17
[102.574] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[114.086] Opening serial device: \\.\COM17
[114.088] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[125.099] ...MSM8953 unknown
[125.099] Determining target secure state
[125.100] Waiting for firehose to get ready
[128.101] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[139.614] Opening serial device: \\.\COM17
[139.616] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[151.128] Opening serial device: \\.\COM17
[151.130] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[162.642] Opening serial device: \\.\COM17
[162.644] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[174.156] Opening serial device: \\.\COM17
[174.158] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[185.170] ...secure = no
[185.170] Recipe: singleimage.default.xml
[185.181] Waiting for firehose to get ready
[188.182] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[199.694] Opening serial device: \\.\COM17
[199.696] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[211.209] Opening serial device: \\.\COM17
[211.211] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[222.723] Opening serial device: \\.\COM17
[222.725] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[234.237] Opening serial device: \\.\COM17
[234.239] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[245.251] Configuring device...
[245.251] Waiting for firehose to get ready
[248.252] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[259.764] Opening serial device: \\.\COM17
[259.766] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[271.278] Opening serial device: \\.\COM17
[271.280] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[282.793] Opening serial device: \\.\COM17
[282.794] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[294.305] Opening serial device: \\.\COM17
[294.307] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[305.318] Waiting for firehose to get ready
[308.319] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[319.832] Opening serial device: \\.\COM17
[319.834] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[331.346] Opening serial device: \\.\COM17
[331.348] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[342.860] Opening serial device: \\.\COM17
[342.862] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[354.375] Opening serial device: \\.\COM17
[354.377] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[365.389] Waiting for firehose to get ready
[368.390] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[379.901] Opening serial device: \\.\COM17
[379.903] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[391.415] Opening serial device: \\.\COM17
[391.417] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[402.929] Opening serial device: \\.\COM17
[402.931] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[414.443] Opening serial device: \\.\COM17
[414.445] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[425.457] Waiting for firehose to get ready
[428.458] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[439.970] Opening serial device: \\.\COM17
[439.971] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[451.483] Opening serial device: \\.\COM17
[451.485] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[462.999] Opening serial device: \\.\COM17
[463.001] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[474.514] Opening serial device: \\.\COM17
[474.516] H->D: <?xml version="1.0"?><data><nop value="Hello"/></data>
[485.527] ERROR: do_package()->do_recipe()->do_configure()->fh_send()->get_fh()->no response
[485.527] Check qboot_log.txt for more details
[485.529] Total time: 485.530s
[485.530]
[485.530] qboot version 3.86
[485.530]
[485.530] DEVICE {
[485.530] name = "\\.\COM17",
[485.530] flags = "0x45",
[485.530] addr = "0x62FD54",
[485.530] sahara.current_mode = "0",
[485.530] api.buffer = "0x2460020",
[485.530] cpu.serial = "1113427738",
[485.530] cpu.id = "70",
[485.530] cpu.sv_sbl = "0",
[485.530] cpu.name = "MSM8953",
[485.530] storage.type = "eMMC",
[485.530] sahara.programmer = "programmer.mbn",
[485.530] module.firehose = "0x768EB8",
[485.530] cpu.ver = "0",
[485.530] cpu.vername = "unknown",
[485.530] }
[485.530]
I'm gonna keep trying if I get over some other programmers.

My phone is a brick. If I can help you with something here, I could perform the tests you want

victoor57 said:
My phone is a brick. If I can help you with something here, I could perform the tests you want
Click to expand...
Click to collapse
His phone is bricked so he can try real time first second he did a edit.

Same problem here, after some experiments. I follow the thread for news...

Aureal2 said:
Same problem here, after some experiments. I follow the thread for news...
Click to expand...
Click to collapse
How did you brick

borksek said:
How did you brick
Click to expand...
Click to collapse
I try to flash stock images from lolinet (9.0) but phone stuck in fastboot mode.
I try to use Lenovo Moto Smart Assistant with no result, same issue.
I try to request an unlock code from Motorola to test If I can unlock bootloader for flash a custom rom and TWRP but fastboot want the OEM switch enable from android developer settings (that not boot).
I try to flash a stock 8.1 rom for try a downgrade (I know the highest risk of brick) and now I need a blank flash..
This is the story :silly:

Aureal2 said:
I try to flash stock images from lolinet (9.0) but phone stuck in fastboot mode.
I try to use Lenovo Moto Smart Assistant with no result, same issue.
I try to request an unlock code from Motorola to test If I can unlock bootloader for flash a custom rom and TWRP but fastboot want the OEM switch enable from android developer settings (that not boot).
I try to flash a stock 8.1 rom for try a downgrade (I know the highest risk of brick) and now I need a blank flash..
This is the story :silly:
Click to expand...
Click to collapse
You should have contacted me instead ?*

Related

[Q] HELP : Htc Desire - Wifi Data Connection problems

Hi to all,
I have some trouble with my htc desire and wifi.
I surfed a long but didnt find how to fix it.
My configuration :
Htc Desire : AMOLED
S-OFF
HBOOT : 6.97.1002
Table : CM7r2
Radio : 32.56.00.32U_5.17.05.23
Kernel : 2.6.35.14-snq-111011
Build : 3.14.405.1
Rom : Revolution v1.5 Data++
I can see wifi signal clearly and powerfully but it seems that packages wont arrive to my phone. Tried with router and a desire-hd-hotspot.
If i go on a webpage is like i am not connected (same for meteo update or any internet stuff) - but good signal and "connected" in any case
Some suggestions ?
I have putted in an output filetext the result of dmesg to see what's wrong with WLAN
[WLAN] wifi_set_power = 1
[ 1964.546173] bravo_wifi_power: 1
[ 1964.896697]
[WLAN] wifi_set_carddetect = 1
[ 1964.896881] bravo_wifi_set_carddetect: 1
[ 1964.897003]mmc0: card_present 1
[ 1964.897094] mmc0: Slot status change detected (0 -> 1)
[1964.898529]
[WLAN] Dongle Host Driver, version 4.218.204.2
[ 1967.114990]
[WLAN] DHD: dongle ram size is set to 294912(orig 294912)
[ 1967.911376]
[WLAN]irq: 239
[ 1967.925628] [WLAN] firmware version: wl0: Jun 17 2010 16:58:32 version 4.218.207.0
[ 1967.943115]
[WLAN] wifi: Disable 802.11n
[ 1968.089324] [WLAN] dhd_preinit_ioctls:str=0x6e756c6c207061636b657400
[ 1968.090942]
[WLAN] eth0: Broadcom Dongle Host Driver mac=XX:XX:XX:XXX:XX:XX
[ 1968.093414] (JUST HIDING MY INFO WITH "XX")
[WLAN] enter dhd_set_multicast_list
[ 1968.093688]
[WLAN] enter dhd_set_multicast_list
[ 1968.094787]
[WLAN] enter dhd_set_multicast_list
[ 1968.097412]
[WLAN] disassoc client!
[ 1969.392333]
[WLAN] Enter set packet filter
[ 1969.395965]
[WLAN] start to add pkt filter 100
[ 1969.398071]
[WLAN] RXFILTER-ADD MULTICAST filter
[ 1969.398254]
[WLAN] Enter set packet filter
[ 1969.399200]
[WLAN] start to add pkt filter 104
[ 1969.401245]
[WLAN] Enter set packet filter
[ 1969.402404]
[WLAN] start to add pkt filter 102
[ 1969.412109]
[WLAN] power active. ctrl_mask: 0x4
[ 1969.451568]
[WLAN] wl_iw_iscan_get_scan return to WE 202 bytes APs=1
[ 1969.569519]
[WLAN] pfn: set ssid = Trojan21 (MY LOLLING SSID NAME)
[ 1969.569641]
[WLAN] lightest is 0, weightest is 0, samessid = 65535
[ 1970.701141]
[WLAN] wake lock 15 secs!
[ 1970.701293]
[WLAN] Link UP
[ 1970.708984]
[WLAN] STA connect received 1
[ 1970.771911] (CONNECTED !!!!)
[WLAN] getpower: and_pm = 1, dhd_pm: 0, ctrl_mask: 0x4, usb_act: 1
[ 1970.771942]
[ 1972.779968]
[WLAN] Enter set packet filter
[ 1972.780975]
[WLAN] start to add pkt filter 101
[ 1972.781097]
[WLAN] ip: c0a8000b
[ 1972.878143]
[WLAN] Driver GET GATEWAY-ADD CMD!!!
[ 1972.878356]
[WLAN] gatewaybuf: c0a80001
[ 1974.416717]
[WLAN] Send Event ISCAN complete
[ 1974.417205]
[WLAN] wl_iw_iscan_get_scan return to WE 202 bytes APs=1
[ 1977.535278]
[GSNR] Gsensor enable
[ 1978.835418] eth0: no IPv6 routers present
[ 1981.263000]
[WLAN] Send Event ISCAN complete
[ 1983.881805]
[WLAN] wl_iw_iscan_get_scan return to WE 202 bytes APs=1
[ 1986.275421]
[WLAN] Send Event ISCAN complete
[ 2028.875457]
[WLAN] wl_iw_iscan_get_scan return to WE 202 bytes APs=1
[ 2029.657989]
[WLAN] Send Event ISCAN complete
[ 2034.312103]
[WLAN] wl_iw_iscan_get_scan return to WE 202 bytes APs=1
[ 2034.688476]
Binder Thread #(parent:zygote): vibrates 0 msec
[ 2055.366271] Binder Thread #(parent:zygote): vibrates 24 msec
[ 2055.366394] [ATS][set_vibration][successful]
[ 2055.390563] [VIB]gpio_timer_func
[ 2055.396057] er.ServerThread(parent:zygote): vibrates 0 msec
[ 2056.320800] Binder Thread #(parent:zygote): vibrates 0 msec
[ 2056.321105] Binder Thread #(parent:zygote): vibrates 24 msec
[ 2056.321228] [ATS][set_vibration][successful]
[ 2056.345458] [VIB]gpio_timer_func
[ 2056.346313] er.ServerThread(parent:zygote): vibrates 0 msec
[ 2056.528106] Binder Thread #(parent:zygote): vibrates 0 msec
[ 2056.528411] Binder Thread #(parent:zygote): vibrates 24 msec
[ 2056.528503] [ATS][set_vibration][successful]
[ 2056.552703] [VIB]gpio_timer_func
[ 2056.556823] er.ServerThread(parent:zygote): vibrates 0 msec
[ 2056.826660] Binder Thread #(parent:zygote): vibrates 0 msec
[ 2056.826873] Binder Thread #(parent:zygote): vibrates 24 msec
[ 2056.827056] [ATS][set_vibration][successful]
[ 2056.851562] [VIB]gpio_timer_func
[ 2056.856445] er.ServerThread(parent:zygote): vibrates 0 msec
[ 2057.022064]
Click to expand...
Click to collapse
and something like a loop...
I hope it will help to figure out what's happening
Maybe kernel is not working correctly ?
I did all format wipe ecc. before install all the new roms (cyano and revolution)
Any ideas ?
EDIT :
Fixed in this way :
Recovery -> wipe all : data dalvik cache sd ecc. -> reflash again the rom
If the brush into the other relatively new re-Radio would be more improve? Or use other ROM try it?

Ubuntu Touch port on Motorola Photon Q bootloops

Hello,
I am trying to port Touch for Photon Q.
I used the following roomservice.xml manifest file:
Code:
<manifest>
<remote fetch="git://github.com/" name="gh"/>
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="gh" revision="stable/cm-11.0" />
<project name="CyanogenMod/android_device_motorola_qcom-common" path="device/motorola/qcom-common" remote="gh" revision="stable/cm-11.0" />
<project name="CyanogenMod/android_kernel_motorola_msm8960-common" path="kernel/motorola/msm8960-common" remote="gh" revision="stable/cm-11.0" />
<project name="CyanogenMod/android_device_motorola_moto_msm8960" path="device/motorola/moto_msm8960" remote="gh" revision="cm-11.0-3.0" />
</manifest>
Unfortunately the device bootloops.
Can someone please have a look at my last_kmsg file below and tell me what might be wrong with the image?
Code:
[ 0.000000,0] Kernel command line: oops=panic console=null androidboot.console=ttyO0 console=tty0 lpj=67677 androidboot.hardware=qcom user_debug=31 androidboot.selinux=permissive androidboot.emmc=true androidboot.serialno=T025701LRK androidboot.baseband=msm androidboot.mode=normal androidboot.bootloader=0x109B battery= mot_sst=0 androidboot.carrier=sprint
[ 1.037479,0] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
[ 1.103860,0] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[ 1.103982,0] i2c-core: driver [tabla-i2c-core] using legacy resume method
[ 1.104501,0] Loading pn544 driver
[ 1.104654,0] pn544_probe : Probing pn544 driver
[ 1.104837,0] pn544_probe : PN544 Misc Minor: 26
[ 1.104959,0] pn544_probe : requesting IRQ 394
[ 1.105478,0] SCSI Media Changer driver v0.25
[ 1.106180,0] PPP generic driver version 2.4.2
[ 1.106424,0] PPP Deflate Compression module registered
[ 1.106485,0] PPP BSD Compression module registered
[ 1.108286,0] PPP MPPE Compression module registered
[ 1.108347,0] NET: Registered protocol family 24
[ 1.108438,0] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 1.108560,0] CSLIP: code copyright 1989 Regents of the University of California.
[ 1.108957,0] tun: Universal TUN/TAP device driver, 1.6
[ 1.109018,0] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 1.109873,0] usbcore: registered new interface driver asix
[ 1.109964,0] usbcore: registered new interface driver cdc_ether
[ 1.110086,0] usbcore: registered new interface driver net1080
[ 1.110239,0] usbcore: registered new interface driver cdc_subset
[ 1.110331,0] usbcore: registered new interface driver zaurus
[ 1.110483,0] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 1.110575,0] cdc_ncm: 04-Aug-2011
[ 1.110697,0] usbcore: registered new interface driver cdc_ncm
[ 1.110819,0] usbcore: registered new interface driver rmnet_usb
[ 1.111338,0] rmnet usb ctrl Initialized.
[ 1.111460,0] wcnss_wlan probed in built-in mode
[ 1.111857,0] rmnet_init: BAM devices[8]
[ 1.114787,0] msm_otg msm_otg: msm_otg probe
[ 1.114878,0] msm_otg msm_otg: OTG regs = e18a8000
[ 1.117289,0] msm_otg_probe: MSM OTG Driver will operate in ACCY CONTROL mode
[ 1.117350,0] msm_otg_init_sm: setting default inputs for ACCY mode
[ 1.117869,0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.118358,0] usbcore: registered new interface driver cdc_acm
[ 1.118449,0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.118632,0] usbcore: registered new interface driver usblp
[ 1.118693,0] Initializing USB Mass Storage driver...
[ 1.118785,0] usbcore: registered new interface driver usb-storage
[ 1.118907,0] USB Mass Storage support registered.
[ 1.118998,0] usbcore: registered new interface driver ums-alauda
[ 1.119151,0] usbcore: registered new interface driver ums-cypress
[ 1.119304,0] usbcore: registered new interface driver ums-datafab
[ 1.119395,0] usbcore: registered new interface driver ums-freecom
[ 1.119548,0] usbcore: registered new interface driver ums-isd200
[ 1.119670,0] usbcore: registered new interface driver ums-jumpshot
[ 1.119822,0] usbcore: registered new interface driver ums-karma
[ 1.119914,0] usbcore: registered new interface driver ums-onetouch
[ 1.120097,0] usbcore: registered new interface driver ums-sddr09
[ 1.120189,0] usbcore: registered new interface driver ums-sddr55
[ 1.120341,0] usbcore: registered new interface driver ums-usbat
[ 1.120494,0] usbcore: registered new interface driver usbserial
[ 1.120616,0] usbserial: USB Serial Driver core
[ 1.120708,0] USB Serial support registered for Qualcomm USB modem
[ 1.120860,0] usbcore: registered new interface driver qcserial
[ 1.120982,0] usbcore: registered new interface driver usb_ehset_test
[ 1.121135,0] usbcore: registered new interface driver diag_bridge
[ 1.121318,0] usbcore: registered new interface driver mdm_bridge
[ 1.121959,0] msm_hsusb msm_hsusb: [usb_gadget_probe_driver] hw_ep_max = 32
[ 1.123424,0] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 1.123515,0] android_usb gadget: Number of LUNs=1
[ 1.123638,0] lun0: LUN: removable file: (no medium)
[ 1.124278,0] android_usb gadget: android_usb ready
[ 1.125530,0] diagchar initialized now
[ 1.125835,0] mousedev: PS/2 mouse device common for all mice
[ 1.126110,0] gpio_set_debounce: gpio-184 status -22
[ 1.126323,0] gpio_set_debounce: gpio-11 status -22
[ 1.126567,0] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1.126690,0] added keypad filter to input dev gpio-keys
[ 1.127941,0] input: keypad_8960 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input1
[ 1.128094,0] added keypad filter to input dev keypad_8960
[ 1.128490,0] usbcore: registered new interface driver xpad
[ 1.128582,0] usbcore: registered new interface driver usb_acecad
[ 1.128704,0] acecad: v3.2:USB Acecad Flair tablet driver
[ 1.128826,0] usbcore: registered new interface driver aiptek
[ 1.128918,0] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
[ 1.129009,0] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
[ 1.129162,0] usbcore: registered new interface driver gtco
[ 1.129284,0] GTCO usb driver version: 2.00.0006
[ 1.129375,0] usbcore: registered new interface driver hanwang
[ 1.129589,0] usbcore: registered new interface driver kbtab
[ 1.129650,0] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
[ 1.129803,0] usbcore: registered new interface driver wacom
[ 1.129864,0] wacom: v1.52:USB Wacom tablet driver
[ 1.130016,0] atmxt_probe: Driver: atmxt-i2c, Version: YN-04-01, Date: 2012-06-28
[ 1.131329,0] atmxt_probe: Probe successful.
[ 1.131817,0] input: light-prox as /devices/virtual/input/input2
[ 1.132092,0] ct406_probe: CT406 part detected
[ 1.133038,0] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input3
[ 1.133648,0] using input dev keypad_8960 for key reset
[ 1.133770,0] using input dev pmic8xxx_pwrkey for key reset
[ 1.134594,0] using rtc device, pm8xxx_rtc, for alarms
[ 1.134747,0] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
[ 1.135083,0] i2c /dev entries driver
[ 1.135510,0] Linux media interface: v0.10
[ 1.135693,0] lirc_dev: IR Remote Control driver registered, major 235
[ 1.135815,0] IR NEC protocol handler initialized
[ 1.135876,0] IR RC5(x) protocol handler initialized
[ 1.135937,0] IR RC6 protocol handler initialized
[ 1.136029,0] IR JVC protocol handler initialized
[ 1.136120,0] IR Sony protocol handler initialized
[ 1.136212,0] IR RC5 (streamzap) protocol handler initialized
[ 1.136273,0] IR LIRC bridge handler initialized
[ 1.136395,0] Linux video capture interface: v2.00
[ 1.136548,0] usbcore: registered new interface driver uvcvideo
[ 1.136639,0] USB Video Class driver (v1.1.0)
[ 1.137036,0] ov8820_power_up R:97 P:95 D:0 A:54 1.8:8921_l29
[ 1.137097,0] ov8820_regulator_on: 8921_l29 1800000
[ 1.229574,0] ov8820 chipid: 8820
[ 1.552235,0] ov8820: match_id success
[ 1.552662,0] msm_sensor_register mctl_node_name[0] = video1
[ 1.552723,0] ov8820_power_down
[ 1.587852,0] ov8820_regulator_off: 1.8
[ 1.598046,0] mt9m114_power_up R:76 D:89 A:82 CLK:24000000
[ 1.657561,0] mt9m114 id: 2481
[ 1.657622,0] mt9m114: match_id success
[ 1.657927,0] msm_sensor_register mctl_node_name[1] = video3
[ 1.657988,0] mt9m114_power_down
[ 1.661956,0] Driver for 1-wire Dallas network protocol.
[ 1.679017,0] lm75 10-0048: hwmon0: sensor 'tmp105'
[ 1.699740,0] pm8xxx_tm_probe: OK
[ 1.700350,0] device-mapper: uevent: version 1.0.3
[ 1.700778,0] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[ 1.701175,0] cpuidle: using governor ladder
[ 1.701236,0] cpuidle: using governor menu
[ 1.701663,0] mmc0: mci-version: 18
[ 1.703372,0] mmc0: bam physical base=0x12402000
[ 1.703433,0] mmc0: bam virtual base=0xe18b4000
[ 1.703555,0] mmc0: BAM device registered. bam_handle=0xdff2f000
[ 1.703708,0] sps:REVISION of BAM 0xe18b4000 is 0x5.
[ 1.704043,0] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
[ 1.704135,0] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
[ 1.704288,0] mmc0: No card detect facilities available
[ 1.704593,0] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
[ 1.704715,0] mmc0: 8 bit data mode enabled
[ 1.704776,0] mmc0: 4 bit data mode disabled
[ 1.704929,0] mmc0: polling status mode disabled
[ 1.704990,0] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
[ 1.705173,0] mmc0: Slot eject status = 0
[ 1.705234,0] mmc0: Power save feature enable = 1
[ 1.705295,0] mmc0: SPS-BAM data transfer mode available
[ 1.705569,0] mmc1: mci-version: 18
[ 1.708133,0] mmc1: bam physical base=0x12182000
[ 1.708255,0] mmc1: bam virtual base=0xe18fc000
[ 1.708316,0] mmc1: BAM device registered. bam_handle=0xdff2f600
[ 1.708530,0] sps:REVISION of BAM 0xe18fc000 is 0x5.
[ 1.708805,0] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128
[ 1.708957,0] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800
[ 1.709507,0] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,651 dma -1 dmacrcri -1
[ 1.709659,0] mmc1: 8 bit data mode disabled
[ 1.709720,0] mmc1: 4 bit data mode enabled
[ 1.709842,0] mmc1: polling status mode disabled
[ 1.709934,0] mmc1: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
[ 1.710056,0] mmc1: Slot eject status = 0
[ 1.710117,0] mmc1: Power save feature enable = 1
[ 1.710209,0] mmc1: SPS-BAM data transfer mode available
[ 1.710605,0] pm8xxx_rgb_led_probe: num_leds is 3
[ 1.710758,0] Registered led device: red
[ 1.710880,0] create_pm8xxx_rgb_led: LED class red, gpio 175, can sleep = 1
[ 1.710941,0] create_pm8xxx_rgb_led: requested pwm for red, pwm_id=0
[ 1.711124,0] Registered led device: green
[ 1.711185,0] create_pm8xxx_rgb_led: LED class green, gpio 176, can sleep = 1
[ 1.711307,0] create_pm8xxx_rgb_led: requested pwm for green, pwm_id=1
[ 1.711429,0] Registered led device: blue
[ 1.711551,0] create_pm8xxx_rgb_led: LED class blue, gpio 177, can sleep = 1
[ 1.711613,0] create_pm8xxx_rgb_led: requested pwm for blue, pwm_id=2
[ 1.713230,0] Registered led device: torch-flash
[ 1.715214,0] usbcore: registered new interface driver usbhid
[ 1.715336,0] usbhid: USB HID core driver
[ 1.715702,0] logger: created 1024K log 'log_main'
[ 1.715855,0] logger: created 512K log 'log_events'
[ 1.716068,0] logger: created 64K log 'log_radio'
[ 1.716374,0] logger: created 64K log 'log_system'
[ 1.716648,0] zram: num_devices not specified. Using default: 1
[ 1.716709,0] zram: Creating 1 devices ...
[ 1.718327,0] usbcore: registered new interface driver snd-usb-audio
[ 1.719273,0] tabla_probe
[ 1.720158,0] msm_pcm_probe: dev name msm-voip-dsp
[ 1.720891,0] msm_pcm_probe: dev name msm-pcm-dsp
[ 1.721104,0] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
[ 1.721379,0] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
[ 1.722081,0] msm_compr_probe: dev name msm-compr-dsp
[ 1.722508,0] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[ 1.723302,0] msm8960_configure_headset_mic_gpios: US_EURO_, AV_SWITCH gpios not configured!!!
[ 1.723424,0] msm8960_audio_init Fail to configure headset mic gpios
[ 1.915458,0] MMI Battery EEPROM Read 192 Bytes
[ 1.915580,0] MMI Battery EEPROM Page 2 Checksum = 0
[ 1.926598,0] MMI Battery EEPROM Page 3 Checksum = 0
[ 1.926720,0] MMI Battery EEPROM Copyright Valid = 1
[ 1.926781,0] MMI Battery Full Capacity 0xAE
[ 1.926934,0] MMI Battery Peak Voltage 0xB9
[ 1.926995,0] MMI Battery DC Impedance 0x5E
[ 1.927086,0] MMI Battery Cell ID 0x4157
[ 1.937585,0] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[ 1.937921,0] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[ 1.938287,0] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
[ 1.938623,0] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
[ 1.939020,0] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
[ 1.939325,0] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
[ 1.939783,0] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
[ 1.941156,0] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
[ 1.942621,0] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
[ 1.943934,0] mmc0: new high speed DDR MMC card at address 0001
[ 1.944300,0] mmcblk0: mmc0:0001 SEM08G 7.28 GiB
[ 1.944544,0] mmcblk0boot0: mmc0:0001 SEM08G partition 1 2.00 MiB
[ 1.944849,0] mmcblk0boot1: mmc0:0001 SEM08G partition 2 2.00 MiB
[ 1.945643,0] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
[ 1.946070,0] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
[ 1.946528,0] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
[ 1.946955,0] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
[ 1.947443,0] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok
[ 1.947871,0] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
[ 1.948298,0] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39
[ 1.952357,0] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
[ 1.952571,0] apanic: Bound to mmc block device 'mmcblk0p33(259:1)'
[ 1.952632,0] apanic: No panic data available
[ 1.954433,0] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
[ 1.954616,0] mmcblk0boot1: unknown partition table
[ 1.956264,0] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
[ 1.956477,0] mmcblk0boot0: unknown partition table
[ 1.956905,0] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
[ 1.957271,0] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
[ 1.957515,0] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
[ 1.957820,0] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
[ 1.958126,0] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
[ 1.958370,0] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
[ 1.958614,0] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
[ 1.958919,0] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
[ 1.959255,0] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
[ 1.959560,0] msm8960_audrx_init : Tabla version 2
[ 1.959865,0] tabla_codec tabla_codec: Failed to add route ANCRight Headset Mic->MIC BIAS3 Internal1
[ 2.025026,0] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
[ 2.026766,0] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
[ 2.027315,0] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
[ 2.027926,0] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
[ 2.029909,0] input: msm8960-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input4
[ 2.030245,0] input: msm8960-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input5
[ 2.034304,0] oprofile: using arm/armv7-krait
[ 2.034488,0] GACT probability NOT on
[ 2.034610,0] Mirror/redirect action on
[ 2.034671,0] u32 classifier
[ 2.034732,0] Actions configured
[ 2.034854,0] Netfilter messages via NETLINK v0.30.
[ 2.034976,0] nf_conntrack version 0.5.0 (12684 buckets, 50736 max)
[ 2.035495,0] ctnetlink v0.93: registering with nfnetlink.
[ 2.035586,0] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 2.035708,0] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 2.036166,0] xt_time: kernel timezone is -0000
[ 2.036410,0] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.036624,0] arp_tables: (C) 2002 David S. Miller
[ 2.036777,0] TCP bic registered
[ 2.036838,0] TCP cubic registered
[ 2.036899,0] TCP htcp registered
[ 2.036960,0] Initializing XFRM netlink socket
[ 2.037631,0] NET: Registered protocol family 10
[ 2.038730,0] Mobile IPv6
[ 2.038821,0] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.039066,0] IPv6 over IPv4 tunneling driver
[ 2.039768,0] NET: Registered protocol family 17
[ 2.039920,0] NET: Registered protocol family 15
[ 2.040042,0] Bridge firewalling registered
[ 2.040225,0] Bluetooth: RFCOMM TTY layer initialized
[ 2.040347,0] Bluetooth: RFCOMM socket layer initialized
[ 2.040439,0] Bluetooth: RFCOMM ver 1.11
[ 2.040531,0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.040622,0] Bluetooth: BNEP filters: protocol multicast
[ 2.040714,0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.040897,0] L2TP core driver, V2.0
[ 2.041019,0] Registering the dns_resolver key type
[ 2.041110,0] VFP support v0.3: implementor 51 architecture 64 part 4d variant 1 rev 4
[ 2.041294,0] Registering SWP/SWPB emulation handler
[ 2.051060,0] clock_late_init() disabled 197 unused clocks
[ 2.058629,0] MSM Watchdog Initialized
[ 2.063482,1] registered taskstats version 1
[ 2.064886,0] EMU-det(request_gpios): requesting gpio[2] EMU_SCI_OUT_GPIO-205
[ 2.065008,0] EMU-det(request_gpios): gpio 205 is IN
[ 2.065160,0] EMU-det(request_gpios): exporting gpio EMU_SCI_OUT_GPIO-205
[ 2.065283,0] EMU-det(request_gpios): couldn't find OPTIONAL EMU_ID_EN_GPIO
[ 2.065405,0] EMU-det(request_gpios): requesting gpio[0] EMU_MUX_CTRL0_GPIO-107
[ 2.065466,0] EMU-det(request_gpios): gpio 107 is OUT
[ 2.065588,0] EMU-det(request_gpios): requesting gpio[1] EMU_MUX_CTRL1_GPIO-96
[ 2.065649,0] EMU-det(request_gpios): gpio 96 is OUT
[ 2.065771,0] EMU-det(request_gpios): requesting gpio[4] SEMU_PPD_DET_GPIO-174
[ 2.065862,0] EMU-det(request_gpios): gpio 174 is IN
[ 2.066046,0] EMU-det(request_gpios): exporting gpio SEMU_PPD_DET_GPIO-174
[ 2.066107,0] EMU-det(request_gpios): requesting gpio[5] SEMU_ALT_MODE_EN_GPIO-186
[ 2.066290,0] EMU-det(request_gpios): exporting gpio SEMU_ALT_MODE_EN_GPIO-186
[ 2.066412,0] EMU-det(request_gpios): couldn't find OPTIONAL EMU_ID_GPIO
[ 2.066473,0] EMU-det(request_gpios): requesting gpio[7] DMB_PPD_DET_GPIO-204
[ 2.066625,0] EMU-det(request_gpios): gpio 204 is IN
[ 2.066778,0] EMU-det(request_gpios): exporting gpio DMB_PPD_DET_GPIO-204
[ 2.066870,0] EMU-det(request_gpios): requesting gpio[8] DPLUS_GPIO-192
[ 2.067083,0] EMU-det(request_gpios): requesting gpio[9] DMINUS_GPIO-172
[ 2.067175,0] EMU-det(request_gpios): requesting gpio[10] WHISPER_UART_TX_GPIO-18
[ 2.067297,0] EMU-det(request_gpios): gpio 18 is OUT
[ 2.067450,0] EMU-det(request_gpios): exporting gpio WHISPER_UART_TX_GPIO-18
[ 2.067572,0] EMU-det(request_gpios): requesting gpio[11] WHISPER_UART_RX_GPIO-19
[ 2.067694,0] EMU-det(request_gpios): gpio 19 is IN
[ 2.067816,0] EMU-det(request_gpios): exporting gpio WHISPER_UART_RX_GPIO-19
[ 2.067907,0] EMU-det(request_gpios): requesting gpio[12] TX_PAIR_GPIO-173
[ 2.067999,0] EMU-det(request_gpios): requesting gpio[13] RX_PAIR_GPIO-193
[ 2.068090,0] EMU-det(emu_id_protection_setup): No neccessary action
[ 2.068182,0] EMU-det(emu_det_probe): done with gpios
[ 2.088600,0] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 2.090614,0] mmc1: new high speed SDHC card at address 0001
[ 2.090950,1] mmcblk1: mmc1:0001 00000 14.6 GiB
[ 2.092629,1] msm_otg msm_otg: phy_reset: success
[ 2.093636,1] mmcblk1: p1
[ 2.197222,1] EMU-det(request_irqs): requesting irq[1] EMU_SCI_OUT_GPIO-577
[ 2.197802,1] EMU-det(request_irqs): requesting irq[0] SEMU_PPD_DET_GPIO-654
[ 2.198229,1] EMU-det(emu_det_probe): done with irqs
[ 2.198596,1] EMU-det(emu_det_probe): registered callback with PM8921
[ 2.200061,1] EMU-det(emu_det_probe): EMU detection driver started
[ 2.200824,1] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2013-10-19 00:17:03 UTC (1382141823)
[ 2.202685,0] Battery Cell ID Found: 3
[ 2.204242,0] read_shutdown_soc: shutdown_soc = 100
[ 2.205280,0] read_ocv_trim: program rev reg is 0x37
[ 2.205493,0] read_ocv_trim: trim reg is 0x41
[ 2.205707,0] read_ocv_trim: trim delta is 8
[ 2.211200,0] adjust_remaining_charge_for_shutdown_soc: shutdown_soc = 100 forcing it now
[ 2.211475,0] adjust_remaining_charge_for_shutdown_soc: To force shutdown_soc = 100, rc = 1803730, pc = 100, ocv mv = 4310
[ 2.211963,0] adjust_remaining_charge_for_shutdown_soc: test revlookup pc = 100 for ocv = 4310
[ 2.212360,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 2.212788,0] pm8921_bms_probe: OK battery_capacity_at_boot=100 volt = 4277463 ocv = 4310000
[ 2.215626,0] get_prop_batt_status: alarm_state=0,batt_valid=0
[ 2.218525,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 2.227743,0] get_prop_batt_status: alarm_state=0,batt_valid=0
[ 2.228017,0] get_prop_batt_status: alarm_state=0,batt_valid=0
[ 2.230947,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 2.242575,0] EMU-det(emu_det_vbus_state): PM8921 USBIN callback: in
[ 2.245933,0] Battery Cell ID Found: 3
[ 2.250724,0] ALSA device list:
[ 2.251060,0] #0: msm8960-snd-card
[ 2.252189,0] Freeing init memory: 292K
[ 2.522539,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 2.645292,1] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 2.656767,1] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 2.672607,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 2.737433,1] EMU-det(detection_work): state CONFIG, time since last run -297270 ms
[ 2.737738,1] EMU-det(alt_mode_setup): SEMU_ALT_MODE_EN is standard
[ 2.757393,1] EMU-det(detection_work): state SAMPLE, time since last run 20 ms
[ 2.758675,0] EMU-det(adc_vbus_get): vbus=5106 mV
[ 2.817884,0] EMU-det(get_sense): SEMU_PPD_DET: ID floating
[ 2.877460,0] EMU-det(get_sense): No need to check DMB_PPD_DET_N
[ 2.877613,0] EMU-det(sense_dp_dm): D+/D- mask: 0x0
[ 2.877765,0] EMU-det(get_sense): irq=0, SESS_VLD, FLOAT, USB_DEV,
[ 2.877857,0] EMU-det(detection_work): SAMPLE keep waiting ...
[ 2.887532,0] EMU-det(detection_work): state SAMPLE, time since last run 130 ms
[ 2.888814,0] EMU-det(adc_vbus_get): vbus=5104 mV
[ 2.950038,0] EMU-det(get_sense): SEMU_PPD_DET: ID floating
[ 3.010224,0] EMU-det(get_sense): No need to check DMB_PPD_DET_N
[ 3.010376,0] EMU-det(sense_dp_dm): D+/D- mask: 0x0
[ 3.010499,0] EMU-det(get_sense): irq=0, SESS_VLD, FLOAT, USB_DEV,
[ 3.010682,0] EMU-det(detection_work): state IDENTIFY, time since last run 120 ms
[ 3.011994,0] EMU-det(adc_vbus_get): vbus=5104 mV
[ 3.068060,0] EMU-det(get_sense): SEMU_PPD_DET: ID floating
[ 3.127727,0] EMU-det(get_sense): No need to check DMB_PPD_DET_N
[ 3.127941,0] EMU-det(sense_dp_dm): D+/D- mask: 0x0
[ 3.128155,0] EMU-det(get_sense): irq=0, SESS_VLD, FLOAT, USB_DEV,
[ 3.128307,0] EMU-det(notify_accy): EMU detection Notify: USB
[ 3.128765,0] EMU-det(alt_mode_setup): SEMU_ALT_MODE_EN is standard
[ 3.128918,0] msm_otg msm_otg: received VBUS event
[ 3.129131,0] msm_otg msm_otg: UNDEFINED --> PERIPHERAL
[ 3.129406,0] pm8921_chg_accy_notify: pm8921_chg_accy_notify: accy_state: 7
[ 3.130566,0] pm8921_chg_accy_notify: pm8921_chg_accy_notify: accy_state: 0
[ 3.132824,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 3.147749,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 3.150343,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 3.164871,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 3.359102,0] vbatdet_low_irq_handler: batt fell below resume voltage charger enabled
[ 3.361910,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 3.454295,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 3.466076,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 3.478528,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 3.491103,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 3.503616,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 3.516007,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 3.528216,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 3.540698,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 3.552937,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 100
[ 3.883045,0] initrd: checking filesystem integrity for the userdata partition
[ 3.894185,0] EXT3-fs (mmcblk0p39): error: couldn't mount because of unsupported optional features (40)
[ 3.929223,0] EXT2-fs (mmcblk0p39): error: couldn't mount because of unsupported optional features (44)
[ 4.142316,1] EXT4-fs (mmcblk0p39): recovery complete
[ 4.144147,1] EXT4-fs (mmcblk0p39): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 4.304715,1] initrd: checking filesystem for userdata took (including e2fsck) 0 seconds
[ 4.305325,1] initrd: mounting /dev/mmcblk0p39
[ 4.324523,1] EXT3-fs (mmcblk0p39): error: unrecognized mount option "discard" or missing value
[ 4.418251,1] EXT4-fs (mmcblk0p39): Ignoring delalloc option - requested data journaling mode
[ 4.419075,1] EXT4-fs (mmcblk0p39): mounted filesystem with journalled data mode. Opts: discard,data=journal
[ 4.430276,1] initrd: boot mode: ubuntu
[ 4.540759,0] initrd: mounting system.img (user mode)
[ 4.605737,0] EXT3-fs (loop1): error: couldn't mount because of unsupported optional features (40)
[ 4.639340,0] EXT2-fs (loop1): error: couldn't mount because of unsupported optional features (40)
[ 4.685060,0] EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.714939,0] initrd: device is moto_msm8960
[ 5.349427,1] initrd: checking fstab /root/var/lib/lxc/android/rootfs/fstab* for additional mount points
[ 5.351411,0] initrd: mounting /root/var/lib/lxc/android/system.img as /root/android/system
[ 5.587852,0] lm3532_bl_work: enabling PWM
[ 6.055974,0] init: ureadahead-touch main process (317) terminated with status 5
[ 10.313871,1] init: could not import file '/init.qcom.rc' from '/init.rc'
[ 10.697604,1] init: cannot open '/initlogo.rle'
[ 10.741278,1] healthd: wakealarm_init: timerfd_create failed
[ 10.758065,1] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 10.758248,1] init: cannot find '/system/bin/ubuntuappmanager.disabled', disabling 'ubuntuappmanager'
[ 10.762887,1] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[ 10.763039,1] init: powerctl: cannot expand '${sys.powerctl}'
[ 10.763131,1] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
[ 10.763283,1] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
[ 10.767648,1] init: property 'persist.sys.usb.config' doesn't exist while expanding '${persist.sys.usb.config}'
[ 10.767831,1] init: cannot expand '${persist.sys.usb.config}' while assigning to 'sys.usb.config'
[ 10.876484,1] atmxt_active_handler: Received invalid data: 0xFF 0x90 0xB9 0xF5 0xF4 0x00 0x00 0x00 0xFF 0x90 0xB9 0xF5 0xF4 0x00 0x00 0x00.
[ 10.876606,1] atmxt_active_handler: Touch active handler failed with error code -22.
[ 13.802716,0] mdp4_calc_req_mdp_clk: src_h is zero!
[ 13.807477,0] mdp4_overlay_borderfill_stage_down: no base layer at mixer=1
[ 15.327819,1] [rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
[ 21.964138,0] PMIC Initiated shutdown cpu_power_off cpu=0
[ 21.964169,1] PMIC Initiated shutdown cpu_power_off cpu=1
[ 21.964810,0] Powering off the SoC
[ 21.965084,0] Calling scm to disable arbiter
[ 21.965359,0] SCM returned even when asked to busy loop rc=-4
[ 21.965756,0] waiting on pmic to shut msm down
11 Corrected bytes, 0 unrecoverable blocks
CPU type is ACPU PVS: Nominal
Thanks!
P.S.
I wasn't able to publish in the development section, because I just registered to the forum.
I truncated the log, because it's too big. The full log is available at pastebin.com/Cziz7ywL
P.S.
I know that Photon Q is an old phone, but I had Nokia N900, and I think that having a phone with a hardware keyboard and running Linux is the best!

Moto x4 XT1900-1 not entering fastboot

I recently purchased a refurbished Moto X4, which shipped to me as a hard brick a month ago.
The device would not vibrate, or enter fastboot mode for a recovery option when holding down power + volume down.
After downloading the Motorolla USB drivers, I was finally getting windows to chime when the device was being plugged in. Windows did *not* recognize the device as a Qualcomm USB device. It would just chime, and nothing would show up in device manager showing a USB device. Just a chime.
Through some miracle, running a blankflash.bat file while holding down the fastboot buttons, after installing ADB eventually got me to a fastboot menu, from which I could restore the phone to factory settings and use it.
That worked for about a month.
Now the phone is hard bricked again, with the same symptoms as before (No fastboot; no recognized Qualcomm USB device), and now blankflash gives me the following errors when I try to use it to get me to fastboot:
**** Log buffer [000001] 2019-05-22_19:31:05 ****
[ 0.000] Opening device: \\.\COM5
[ 0.003] Detecting device
[ 0.006] ...cpu.id = 172 (0xac)
[ 0.006] ...cpu.sn = 518110791 (0x1ee1be47)
[ 0.006] Opening singleimage
[ 0.007] Loading package
[ 0.009] ...filename = pkg.xml
[ 0.011] Loading programmer
[ 0.011] ...filename = programmer.elf
[ 0.011] Sending programmer
[ 0.215] Handling things over to programmer
[ 0.216] Identifying CPU version
[ 0.216] Waiting for firehose to get ready
[ 3.235] ...SDM630 1.0
[ 3.235] Determining target secure state
[ 3.237] ...secure = yes
[ 3.272] Configuring device...
[ 3.279] Flashing GPT...
[ 3.279] Flashing partition with gpt.bin
[ 3.284] Initializing storage
[ 4.463] Target NAK!
[ 4.463] ...ERROR: Failed to open the SDCC Device slot 0 partition 0
[ 4.463] ...ERROR: Failed to open the device 1 slot 0 partition 0
[ 4.463] ...INFO: Device type 1, slot 0, partition 0, error 0
[ 4.463] ...WARN: Get Info failed to open 1 slot 0, partition 0, error 0
[ 4.464] ...ERROR: Failed to get device info slot:0artition:0
[ 4.464] ...GetStorageInfo Failed - storage_device_get_info() returned FALSE
[ 4.464] ...ERROR 14: Line 1283: HANDLE_STORAGE_INFO_FAILURE
[ 4.465] ERROR: do_package()->do_recipe()->do_flash()->flash_simg()->do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do_fmt()->do_recipe()->NAK
[ 4.465] Check qboot_log.txt for more details
[ 4.466] Total time: 4.468s
[ 4.466]
[ 4.466] qboot version 3.86
[ 4.466]
[ 4.466] DEVICE {
[ 4.466] name = "\\.\COM5",
[ 4.466] flags = "0x144",
[ 4.466] addr = "0x62FD64",
[ 4.466] sahara.current_mode = "0",
[ 4.466] api.buffer = "0xEC5020",
[ 4.466] cpu.serial = "518110791",
[ 4.466] cpu.id = "172",
[ 4.466] cpu.sv_sbl = "1",
[ 4.466] cpu.name = "SDM630",
[ 4.466] storage.type = "eMMC",
[ 4.466] sahara.programmer = "programmer.elf",
[ 4.466] module.firehose = "0xFFEAB8",
[ 4.466] api.firehose = "0xFFEF20",
[ 4.466] cpu.ver = "256",
Click to expand...
Click to collapse
Has anyone else experienced this? Or can anyone explain to me what tools to use and what they do? I am very new to this unbricking process.

XT1941-4 (DEEN) stuck on fastboot

Hello, my XT1941-4 got stuck on fastboot. Model is showing only zeros (0000000000), IMEI as well. (see pictures)
Fastboot flash doesn't work maybe because bootloader is LOCKED. Tried to boot it into EDL via test point and blank flash it. Does anyone have any experience with this?
**** Log buffer [000001] 2022-01-18_10:26:13 ****
[ -0.000] Opening device: \\.\COM13
[ -0.000] Detecting device
[ -0.000] ...cpu.id = 70 (0x46)
[ -0.000] ...cpu.sn = 655886582 (0x271808f6)
[ -0.000] Opening singleimage
[ 0.016] Loading package
[ 0.016] ...filename = singleimage.pkg.xml
[ 0.016] Loading programmer
[ 0.016] ...filename = programmer.mbn
[ 0.016] Sending programmer
[ 11.173] ERROR: sahara_download()->IO error
[ 11.173] Check qboot_log.txt for more details
[ 11.173] Total time: 11.173s
[ 11.173]
[ 11.173] qboot version 3.86
[ 11.173]
[ 11.173] DEVICE {
[ 11.173] name = "\\.\COM13",
[ 11.173] flags = "0x64",
[ 11.173] addr = "0x28FD64",
[ 11.173] sahara.current_mode = "0",
[ 11.173] api.buffer = "0x20EF020",
[ 11.173] cpu.serial = "655886582",
[ 11.173] cpu.id = "70",
[ 11.173] cpu.sv_sbl = "0",
[ 11.173] cpu.name = "MSM8953",
[ 11.173] storage.type = "eMMC",
[ 11.173] sahara.programmer = "programmer.mbn",
[ 11.173] api.bnr = "0x2023EE8",
[ 11.173] }
[ 11.173]
[ 11.173]
[ 11.173] Backup & Restore {
[ 11.173] num_entries = 0,
[ 11.173] restoring = "false",
[ 11.173] backup_error = "not started",
[ 11.173] restore_error = "not started",
[ 11.173] }
[ 11.173]
**** Log buffer [000001] 2022-01-19_16:09:20 ****
[ 0.001] Opening device: \\.\COM13
[ 0.002] Detecting device
[ 0.005] ...cpu.id = 70 (0x46)
[ 0.005] ...cpu.sn = 655886582 (0x271808f6)
[ 0.005] Opening singleimage
[ 0.009] Loading package
[ 0.013] ...filename = singleimage.pkg.xml
[ 0.015] Loading programmer
[ 0.017] ...filename = programmer.mbn
[ 0.017] Sending programmer
[ 11.027] ERROR: sahara_download()->IO error
[ 11.028] Check qboot_log.txt for more details
[ 11.028] Total time: 11.031s
[ 11.028]
[ 11.028] qboot version 3.86
[ 11.028]
[ 11.028] DEVICE {
[ 11.028] name = "\\.\COM13",
[ 11.028] flags = "0x64",
[ 11.028] addr = "0x28FD64",
[ 11.028] sahara.current_mode = "0",
[ 11.028] api.buffer = "0x5F3020",
[ 11.028] cpu.serial = "655886582",
[ 11.028] cpu.id = "70",
[ 11.028] cpu.sv_sbl = "0",
[ 11.028] cpu.name = "MSM8953",
[ 11.028] storage.type = "eMMC",
[ 11.028] sahara.programmer = "programmer.mbn",
[ 11.028] api.bnr = "0x4F3EE8",
[ 11.028] }
[ 11.028]
[ 11.028]
[ 11.028] Backup & Restore {
[ 11.028] num_entries = 0,
[ 11.028] restoring = "false",
[ 11.028] backup_error = "not started",
[ 11.028] restore_error = "not started",
[ 11.028] }
[ 11.028]
Click to expand...
Click to collapse

Question Redmi 10 2022 brick

Hello, I tried to go on Miui 13 by flash since I didn't get the update, so I download the rom and run it with miflash.
After some time, I get a success, but now my phone didn't work anymore, even fastboot or esle. When I connect the phone on pc it connect/disconnect so I can't do nothing. I've only USB (COM3) Can someone help me ?
When I press power the phone is not detected by windows. It's the only sign of "life"
Terrence5 said:
Hello, I tried to go on Miui 13 by flash since I didn't get the update, so I download the rom and run it with miflash.
After some time, I get a success, but now my phone didn't work anymore, even fastboot or esle. When I connect the phone on pc it connect/disconnect so I can't do nothing. I've only USB (COM3) Can someone help me ?
When I press power the phone is not detected by windows. It's the only sign of "life"
Click to expand...
Click to collapse
Maybe you have a Chinese version and have relocked the bootloader?
if so you will need to flash it in EDL mode.
NOSS8 said:
Maybe you have a Chinese version and have relocked the bootloader?
if so you will need to flash it in EDL mode.
Click to expand...
Click to collapse
I bought from China the phone, but it was in global, and already unlock when I bought it. When I used the MiFlash I didn't let the button on relock
Terrence5 said:
I bought from China the phone, but it was in global, and already unlock when I bought it. When I used the MiFlash I didn't let the button on relock
Click to expand...
Click to collapse
Can you post the Miflash log?
Miflash/log files
NOSS8 said:
Can you post the Miflash log?
Miflash/log files
Click to expand...
Click to collapse
Spoiler: 1
[19:08:10 7b0e98ef0511]:MiFlash 2018.5.28.0
[19:08:10 7b0e98ef0511]:Thread id:13 Thread name:7b0e98ef0511
[19:08:10 7b0e98ef0511]:image path:\Téléchargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global
[19:08:10 7b0e98ef0511]:env android path:"D:\Téléchargement\Compressed\MiFlash20180528\Source\ThirdParty\Google\Android"
[19:08:10 7b0e98ef0511]:script :\Téléchargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\flash_all.bat
[19:08:10 7b0e98ef0511]hysical Memory Usage:3289088 Byte
[19:08:10 7b0e98ef0511]:start process id 70060 name cmd
[19:08:10 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 getvar product 2>&1 | findstr /r /c:"^product: *selene" /c:"^product: *eos" ||
[19:08:10 7b0e98ef0511]:inforoduct: selene
[19:08:10 7b0e98ef0511]:info:$if exist D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\images\anti_version.txt (for /F "delims==" %a in (D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\images\anti_version.txt) do (set CURRENT_ANTI_VER=%a ) )
[19:08:10 7b0e98ef0511]:info:$(set CURRENT_ANTI_VER=1 )
[19:08:10 7b0e98ef0511]:info:$if [1] EQU [] set CURRENT_ANTI_VER=0
[19:08:10 7b0e98ef0511]:info:$for /F "tokens=2 delims=: " %i in ('fastboot -s 7b0e98ef0511 getvar anti 2>&1 | findstr /r /c:"anti:"') do (set version=%i )
[19:08:10 7b0e98ef0511]:info:$(set version=1 )
[19:08:10 7b0e98ef0511]:info:$if [1] EQU [] set version=0
[19:08:10 7b0e98ef0511]:info:$set anticheck="antirollback check pass"
[19:08:10 7b0e98ef0511]:info:$if 1 GTR 1 set anticheck="Current device antirollback version is greater than this pakcage"
[19:08:10 7b0e98ef0511]:info:$echo "antirollback check pass" | findstr /r /c:"pass" ||
[19:08:10 7b0e98ef0511]:info:"antirollback check pass"
[19:08:10 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 erase boot ||
[19:08:10 7b0e98ef0511]:err:erasing 'boot_b'...
[19:08:10 7b0e98ef0511]:err:OKAY [ 0.031s]
[19:08:10 7b0e98ef0511]:err:finished. total time: 0.031s
[19:08:10 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash preloader_a D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\preloader_selene.bin ||
[19:08:10 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:08:10 7b0e98ef0511]:err:sending 'preloader_a' (294 KB)...
[19:08:10 7b0e98ef0511]:err:OKAY [ 0.017s]
[19:08:10 7b0e98ef0511]:err:writing 'preloader_a'...
[19:08:10 7b0e98ef0511]:err:OKAY [ 0.091s]
[19:08:10 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash lk_a D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\lk.img ||
[19:08:10 7b0e98ef0511]:err:finished. total time: 0.108s
[19:08:11 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:08:11 7b0e98ef0511]:err:sending 'lk_a' (1553 KB)...
[19:08:11 7b0e98ef0511]:err:OKAY [ 0.045s]
[19:08:11 7b0e98ef0511]:err:writing 'lk_a'...
[19:08:11 7b0e98ef0511]:err:OKAY [ 0.033s]
[19:08:11 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash logo_a D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\logo.bin ||
[19:08:11 7b0e98ef0511]:err:finished. total time: 0.077s
[19:08:11 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:08:11 7b0e98ef0511]:err:sending 'logo_a' (1718 KB)...
[19:08:11 7b0e98ef0511]:err:OKAY [ 0.050s]
[19:08:11 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash tee_a D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\tee.img ||
[19:08:11 7b0e98ef0511]:err:writing 'logo_a'...
[19:08:11 7b0e98ef0511]:err:OKAY [ 0.026s]
[19:08:11 7b0e98ef0511]:err:finished. total time: 0.076s
[19:08:11 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:08:11 7b0e98ef0511]:err:sending 'tee_a' (2505 KB)...
[19:08:11 7b0e98ef0511]:err:OKAY [ 0.068s]
[19:08:11 7b0e98ef0511]:err:writing 'tee_a'...
[19:08:11 7b0e98ef0511]:err:OKAY [ 0.036s]
[19:08:11 7b0e98ef0511]:err:finished. total time: 0.104s
[19:08:11 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash scp_a D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\scp.img ||
[19:08:11 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:08:11 7b0e98ef0511]:err:sending 'scp_a' (344 KB)...
[19:08:11 7b0e98ef0511]:err:OKAY [ 0.019s]
[19:08:11 7b0e98ef0511]:err:writing 'scp_a'...
[19:08:11 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash sspm_a D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\sspm.img ||
[19:08:11 7b0e98ef0511]:err:OKAY [ 0.008s]
[19:08:11 7b0e98ef0511]:err:finished. total time: 0.027s
[19:08:11 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:08:11 7b0e98ef0511]:err:sending 'sspm_a' (493 KB)...
[19:08:11 7b0e98ef0511]:err:OKAY [ 0.022s]
[19:08:11 7b0e98ef0511]:err:writing 'sspm_a'...
[19:08:11 7b0e98ef0511]:err:OKAY [ 0.010s]
[19:08:11 7b0e98ef0511]:err:finished. total time: 0.032s
[19:08:11 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash super D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\super.img ||
[19:16:37 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 1/49 (130794 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.710s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 1/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 2.463s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 2/49 (130833 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.626s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 2/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 2.035s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 3/49 (130892 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.429s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 3/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.962s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 4/49 (130821 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.589s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 4/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 2.096s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 5/49 (131052 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.527s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 5/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.781s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 6/49 (129594 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.559s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 6/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 3.266s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 7/49 (130829 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.708s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 7/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 2.082s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 8/49 (130590 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.488s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 8/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 2.405s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 9/49 (130574 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.571s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 9/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 2.300s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 10/49 (130968 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.519s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 10/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.902s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 11/49 (130721 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.442s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 11/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 2.179s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 12/49 (131047 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.488s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 12/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 2.463s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 13/49 (122219 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.300s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 13/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 3.601s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 14/49 (124868 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.278s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 14/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.711s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 15/49 (131016 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.541s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 15/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.819s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 16/49 (130988 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.604s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 16/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.904s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 17/49 (130777 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.547s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 17/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 2.172s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 18/49 (130924 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.591s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 18/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.877s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 19/49 (131016 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.456s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 19/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.836s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 20/49 (131052 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.608s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 20/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.802s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 21/49 (130196 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.728s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 21/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 2.716s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 22/49 (130877 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.743s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 22/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 2.039s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 23/49 (124931 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.570s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 23/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 9.825s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 24/49 (131060 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.728s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 24/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.777s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 25/49 (130932 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.498s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 25/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.873s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 26/49 (130716 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.631s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 26/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.865s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 27/49 (130888 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.488s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 27/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.854s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 28/49 (131032 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.577s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 28/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.784s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 29/49 (130992 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.741s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 29/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.862s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 30/49 (130845 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.473s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 30/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 2.049s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 31/49 (129478 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.572s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 31/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 3.294s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 32/49 (130909 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.638s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 32/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.990s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 33/49 (129854 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.516s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 33/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 3.152s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 34/49 (131060 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.571s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 34/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.778s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 35/49 (131032 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.541s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 35/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.813s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 36/49 (131044 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.623s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 36/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.803s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 37/49 (129810 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.509s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 37/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 3.318s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 38/49 (123728 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.337s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 38/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 3.809s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 39/49 (121788 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.193s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 39/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 1.870s]
[19:16:37 7b0e98ef0511]:err:sending sparse 'super' 40/49 (129545 KB)...
[19:16:37 7b0e98ef0511]:err:OKAY [ 4.415s]
[19:16:37 7b0e98ef0511]:err:writing 'super' 40/49...
[19:16:37 7b0e98ef0511]:err:OKAY [ 2.060s]
[19:17:30 7b0e98ef0511]:err:sending sparse 'super' 41/49 (122428 KB)...
[19:17:30 7b0e98ef0511]:err:OKAY [ 4.220s]
[19:17:30 7b0e98ef0511]:err:writing 'super' 41/49...
[19:17:30 7b0e98ef0511]:err:OKAY [ 1.804s]
[19:17:30 7b0e98ef0511]:err:sending sparse 'super' 42/49 (129240 KB)...
[19:17:30 7b0e98ef0511]:err:OKAY [ 4.458s]
[19:17:30 7b0e98ef0511]:err:writing 'super' 42/49...
[19:17:30 7b0e98ef0511]:err:OKAY [ 1.893s]
[19:17:30 7b0e98ef0511]:err:sending sparse 'super' 43/49 (124820 KB)...
[19:17:30 7b0e98ef0511]:err:OKAY [ 4.253s]
[19:17:30 7b0e98ef0511]:err:writing 'super' 43/49...
[19:17:30 7b0e98ef0511]:err:OKAY [ 1.814s]
[19:17:30 7b0e98ef0511]:err:sending sparse 'super' 44/49 (131004 KB)...
[19:17:30 7b0e98ef0511]:err:OKAY [ 4.553s]
[19:17:30 7b0e98ef0511]:err:writing 'super' 44/49...
[19:17:30 7b0e98ef0511]:err:OKAY [ 1.862s]
[19:17:30 7b0e98ef0511]:err:sending sparse 'super' 45/49 (131068 KB)...
[19:17:30 7b0e98ef0511]:err:OKAY [ 4.562s]
[19:17:30 7b0e98ef0511]:err:writing 'super' 45/49...
[19:17:30 7b0e98ef0511]:err:OKAY [ 1.868s]
[19:17:30 7b0e98ef0511]:err:sending sparse 'super' 46/49 (123432 KB)...
[19:17:30 7b0e98ef0511]:err:OKAY [ 4.387s]
[19:17:30 7b0e98ef0511]:err:writing 'super' 46/49...
[19:17:30 7b0e98ef0511]:err:OKAY [ 1.759s]
[19:17:30 7b0e98ef0511]:err:sending sparse 'super' 47/49 (126688 KB)...
[19:17:30 7b0e98ef0511]:err:OKAY [ 4.428s]
[19:17:30 7b0e98ef0511]:err:writing 'super' 47/49...
[19:17:30 7b0e98ef0511]:err:OKAY [ 1.763s]
[19:17:30 7b0e98ef0511]:err:sending sparse 'super' 48/49 (130264 KB)...
[19:17:30 7b0e98ef0511]:err:OKAY [ 4.501s]
[19:17:30 7b0e98ef0511]:err:writing 'super' 48/49...
[19:17:30 7b0e98ef0511]:err:OKAY [ 1.826s]
[19:17:30 7b0e98ef0511]:err:sending sparse 'super' 49/49 (70564 KB)...
[19:17:30 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash dtbo_a D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\dtbo.img ||
[19:17:30 7b0e98ef0511]:err:OKAY [ 2.399s]
[19:17:30 7b0e98ef0511]:err:writing 'super' 49/49...
[19:17:30 7b0e98ef0511]:err:OKAY [ 1.101s]
[19:17:30 7b0e98ef0511]:err:finished. total time: 331.349s
[19:17:31 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:17:31 7b0e98ef0511]:err:sending 'dtbo_a' (270 KB)...
[19:17:31 7b0e98ef0511]:err:OKAY [ 0.016s]
[19:17:31 7b0e98ef0511]:err:writing 'dtbo_a'...
[19:17:31 7b0e98ef0511]:err:OKAY [ 0.013s]
[19:17:31 7b0e98ef0511]:err:finished. total time: 0.029s
[19:17:31 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash rescue D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\rescue.img ||
[19:17:31 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:17:31 7b0e98ef0511]:err:sending 'rescue' (40 KB)...
[19:17:31 7b0e98ef0511]:err:OKAY [ 0.011s]
[19:17:31 7b0e98ef0511]:err:writing 'rescue'...
[19:17:31 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash vbmeta_a D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\vbmeta.img ||
[19:17:31 7b0e98ef0511]:err:OKAY [ 0.018s]
[19:17:31 7b0e98ef0511]:err:finished. total time: 0.029s
[19:17:31 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:17:31 7b0e98ef0511]:err:sending 'vbmeta_a' (4 KB)...
[19:17:31 7b0e98ef0511]:err:OKAY [ 0.012s]
[19:17:31 7b0e98ef0511]:err:writing 'vbmeta_a'...
[19:17:31 7b0e98ef0511]:err:OKAY [ 0.008s]
[19:17:31 7b0e98ef0511]:err:finished. total time: 0.020s
[19:17:31 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash spmfw_a D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\spmfw.img ||
[19:17:31 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:17:31 7b0e98ef0511]:err:sending 'spmfw_a' (48 KB)...
[19:17:31 7b0e98ef0511]:err:OKAY [ 0.011s]
[19:17:31 7b0e98ef0511]:err:writing 'spmfw_a'...
[19:17:31 7b0e98ef0511]:err:OKAY [ 0.008s]
[19:17:31 7b0e98ef0511]:err:finished. total time: 0.019s
[19:17:31 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash md1img_a D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\md1img.img ||
[19:17:34 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:17:34 7b0e98ef0511]:err:sending 'md1img_a' (56445 KB)...
[19:17:34 7b0e98ef0511]:err:OKAY [ 1.264s]
[19:17:34 7b0e98ef0511]:err:writing 'md1img_a'...
[19:17:34 7b0e98ef0511]:err:OKAY [ 0.760s]
[19:17:34 7b0e98ef0511]:err:finished. total time: 2.024s
[19:17:34 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash vbmeta_system_a D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\vbmeta_system.img ||
[19:17:34 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:17:34 7b0e98ef0511]:err:sending 'vbmeta_system_a' (4 KB)...
[19:17:34 7b0e98ef0511]:err:OKAY [ 0.010s]
[19:17:34 7b0e98ef0511]:err:writing 'vbmeta_system_a'...
[19:17:34 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash vbmeta_vendor_a D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\vbmeta_vendor.img ||
[19:17:34 7b0e98ef0511]:err:OKAY [ 0.006s]
[19:17:34 7b0e98ef0511]:err:finished. total time: 0.016s
[19:17:34 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:17:34 7b0e98ef0511]:err:sending 'vbmeta_vendor_a' (4 KB)...
[19:17:34 7b0e98ef0511]:err:OKAY [ 0.010s]
[19:17:34 7b0e98ef0511]:err:writing 'vbmeta_vendor_a'...
[19:17:34 7b0e98ef0511]:err:OKAY [ 0.009s]
[19:17:34 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash cust D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\cust.img ||
[19:17:34 7b0e98ef0511]:err:finished. total time: 0.020s
[19:18:54 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:18:54 7b0e98ef0511]:err:sending sparse 'cust' 1/13 (129752 KB)...
[19:18:54 7b0e98ef0511]:err:OKAY [ 3.146s]
[19:18:54 7b0e98ef0511]:err:writing 'cust' 1/13...
[19:18:54 7b0e98ef0511]:err:OKAY [ 1.768s]
[19:18:54 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash userdata D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\userdata.img ||
[19:18:54 7b0e98ef0511]:err:sending sparse 'cust' 2/13 (129012 KB)...
[19:18:54 7b0e98ef0511]:err:OKAY [ 3.110s]
[19:18:54 7b0e98ef0511]:err:writing 'cust' 2/13...
[19:18:54 7b0e98ef0511]:err:OKAY [ 1.749s]
[19:18:54 7b0e98ef0511]:err:sending sparse 'cust' 3/13 (129028 KB)...
[19:18:54 7b0e98ef0511]:err:OKAY [ 3.126s]
[19:18:54 7b0e98ef0511]:err:writing 'cust' 3/13...
[19:18:54 7b0e98ef0511]:err:OKAY [ 1.743s]
[19:18:54 7b0e98ef0511]:err:sending sparse 'cust' 4/13 (129012 KB)...
[19:18:54 7b0e98ef0511]:err:OKAY [ 3.092s]
[19:18:54 7b0e98ef0511]:err:writing 'cust' 4/13...
[19:18:54 7b0e98ef0511]:err:OKAY [ 1.740s]
[19:18:54 7b0e98ef0511]:err:sending sparse 'cust' 5/13 (129028 KB)...
[19:18:54 7b0e98ef0511]:err:OKAY [ 3.108s]
[19:18:54 7b0e98ef0511]:err:writing 'cust' 5/13...
[19:18:54 7b0e98ef0511]:err:OKAY [ 1.753s]
[19:18:54 7b0e98ef0511]:err:sending sparse 'cust' 6/13 (129012 KB)...
[19:18:54 7b0e98ef0511]:err:OKAY [ 3.118s]
[19:18:54 7b0e98ef0511]:err:writing 'cust' 6/13...
[19:18:54 7b0e98ef0511]:err:OKAY [ 1.742s]
[19:18:54 7b0e98ef0511]:err:sending sparse 'cust' 7/13 (129028 KB)...
[19:18:54 7b0e98ef0511]:err:OKAY [ 3.124s]
[19:18:54 7b0e98ef0511]:err:writing 'cust' 7/13...
[19:18:54 7b0e98ef0511]:err:OKAY [ 1.753s]
[19:18:54 7b0e98ef0511]:err:sending sparse 'cust' 8/13 (129016 KB)...
[19:18:54 7b0e98ef0511]:err:OKAY [ 3.068s]
[19:18:54 7b0e98ef0511]:err:writing 'cust' 8/13...
[19:18:54 7b0e98ef0511]:err:OKAY [ 1.746s]
[19:18:54 7b0e98ef0511]:err:sending sparse 'cust' 9/13 (129028 KB)...
[19:18:54 7b0e98ef0511]:err:OKAY [ 3.111s]
[19:18:54 7b0e98ef0511]:err:writing 'cust' 9/13...
[19:18:54 7b0e98ef0511]:err:OKAY [ 1.749s]
[19:18:54 7b0e98ef0511]:err:sending sparse 'cust' 10/13 (129012 KB)...
[19:18:54 7b0e98ef0511]:err:OKAY [ 3.094s]
[19:18:54 7b0e98ef0511]:err:writing 'cust' 10/13...
[19:18:54 7b0e98ef0511]:err:OKAY [ 1.748s]
[19:18:54 7b0e98ef0511]:err:sending sparse 'cust' 11/13 (129020 KB)...
[19:18:54 7b0e98ef0511]:err:OKAY [ 3.084s]
[19:18:54 7b0e98ef0511]:err:writing 'cust' 11/13...
[19:18:54 7b0e98ef0511]:err:OKAY [ 1.747s]
[19:18:54 7b0e98ef0511]:err:sending sparse 'cust' 12/13 (129020 KB)...
[19:18:54 7b0e98ef0511]:err:OKAY [ 3.090s]
[19:18:54 7b0e98ef0511]:err:writing 'cust' 12/13...
[19:18:54 7b0e98ef0511]:err:OKAY [ 1.748s]
[19:18:54 7b0e98ef0511]:err:sending sparse 'cust' 13/13 (24860 KB)...
[19:18:54 7b0e98ef0511]:err:OKAY [ 0.611s]
[19:18:54 7b0e98ef0511]:err:writing 'cust' 13/13...
[19:18:54 7b0e98ef0511]:err:OKAY [ 0.346s]
[19:18:54 7b0e98ef0511]:err:finished. total time: 59.214s
[19:19:39 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:19:39 7b0e98ef0511]:err:sending sparse 'userdata' 1/7 (131068 KB)...
[19:19:39 7b0e98ef0511]:err:OKAY [ 3.165s]
[19:19:39 7b0e98ef0511]:err:writing 'userdata' 1/7...
[19:19:39 7b0e98ef0511]:err:OKAY [ 2.097s]
[19:19:39 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 flash boot_a D:\T‚l‚chargement\selene_global_images_V13.0.4.0.SKUMIXM_20220425.0000.00_12.0_global\\images\boot.img ||
[19:19:39 7b0e98ef0511]:err:sending sparse 'userdata' 2/7 (131068 KB)...
[19:19:39 7b0e98ef0511]:err:OKAY [ 3.170s]
[19:19:39 7b0e98ef0511]:err:writing 'userdata' 2/7...
[19:19:39 7b0e98ef0511]:err:OKAY [ 1.778s]
[19:19:39 7b0e98ef0511]:err:sending sparse 'userdata' 3/7 (131068 KB)...
[19:19:39 7b0e98ef0511]:err:OKAY [ 3.123s]
[19:19:39 7b0e98ef0511]:err:writing 'userdata' 3/7...
[19:19:39 7b0e98ef0511]:err:OKAY [ 1.783s]
[19:19:39 7b0e98ef0511]:err:sending sparse 'userdata' 4/7 (131068 KB)...
[19:19:39 7b0e98ef0511]:err:OKAY [ 3.149s]
[19:19:39 7b0e98ef0511]:err:writing 'userdata' 4/7...
[19:19:39 7b0e98ef0511]:err:OKAY [ 1.770s]
[19:19:39 7b0e98ef0511]:err:sending sparse 'userdata' 5/7 (131068 KB)...
[19:19:39 7b0e98ef0511]:err:OKAY [ 3.160s]
[19:19:39 7b0e98ef0511]:err:writing 'userdata' 5/7...
[19:19:39 7b0e98ef0511]:err:OKAY [ 1.779s]
[19:19:39 7b0e98ef0511]:err:sending sparse 'userdata' 6/7 (131068 KB)...
[19:19:39 7b0e98ef0511]:err:OKAY [ 3.117s]
[19:19:39 7b0e98ef0511]:err:writing 'userdata' 6/7...
[19:19:39 7b0e98ef0511]:err:OKAY [ 1.778s]
[19:19:39 7b0e98ef0511]:err:sending sparse 'userdata' 7/7 (84608 KB)...
[19:19:39 7b0e98ef0511]:err:OKAY [ 1.899s]
[19:19:39 7b0e98ef0511]:err:writing 'userdata' 7/7...
[19:19:39 7b0e98ef0511]:err:OKAY [ 1.152s]
[19:19:39 7b0e98ef0511]:err:finished. total time: 32.920s
[19:19:43 7b0e98ef0511]:err:target reported max download size of 134217728 bytes
[19:19:43 7b0e98ef0511]:err:sending 'boot_a' (65536 KB)...
[19:19:43 7b0e98ef0511]:err:OKAY [ 1.461s]
[19:19:43 7b0e98ef0511]:err:writing 'boot_a'...
[19:19:43 7b0e98ef0511]:err:OKAY [ 0.881s]
[19:19:43 7b0e98ef0511]:err:finished. total time: 2.341s
[19:19:43 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 erase misc ||
[19:19:43 7b0e98ef0511]:err:erasing 'misc'...
[19:19:43 7b0e98ef0511]:err:OKAY [ 0.007s]
[19:19:43 7b0e98ef0511]:err:finished. total time: 0.007s
[19:19:43 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 erase metadata ||
[19:19:43 7b0e98ef0511]:err:erasing 'metadata'...
[19:19:43 7b0e98ef0511]:err:OKAY [ 0.005s]
[19:19:43 7b0e98ef0511]:err:finished. total time: 0.005s
[19:19:43 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 erase md_udc ||
[19:19:43 7b0e98ef0511]:err:erasing 'md_udc'...
[19:19:43 7b0e98ef0511]:err:OKAY [ 0.006s]
[19:19:43 7b0e98ef0511]:err:finished. total time: 0.006s
[19:19:43 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 oem cdms
[19:19:43 7b0e98ef0511]:err:...
[19:19:43 7b0e98ef0511]:err:OKAY [ 0.006s]
[19:19:43 7b0e98ef0511]:err:finished. total time: 0.006s
[19:19:43 7b0e98ef0511]:info:$fastboot -s 7b0e98ef0511 reboot ||
[19:19:43 7b0e98ef0511]:err:rebooting...
[19:19:43 7b0e98ef0511]:err:finished. total time: 0.000s
[19:19:43 7b0e98ef0511]:flash done
[19:19:43 7b0e98ef0511]rocess exit.
[19:19:43 7b0e98ef0511]:flashSuccess True
[19:19:43 7b0e98ef0511]:isFactory False CheckCPUID False
[19:19:43 7b0e98ef0511]:before:flashSuccess is True set IsUpdate:True set IsDone True
[19:19:43 7b0e98ef0511]:after:flashSuccess is True set IsUpdate:false set IsDone true
i sent you a pm
The flash log always includes this line since the bootloader is unlocked and not locked.
[02:07:16 5363e375]:error:Not catch checkpoint (\$fastboot -s .* lock),flash is not done
[02:07:16 5363e375]rocess exit.
[02:07:17 5363e375]:flashSuccess False
[02:07:17 5363e375]:isFactory False CheckCPUID False
[02:07:17 5363e375]:before:flashSuccess is False set IsUpdate:True set IsDone True
[02:07:17 5363e375]:after:flashSuccess is False set IsUpdate:false set IsDone true
Note that you have used an old version of Miflash
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
If your device changed China ROM to Global ROM then your device name will show "selene" but it is a Selenes.
This is probably the problem.
No I recceived a global rom on the phone
Terrence5 said:
No I recceived a global rom on the phone
Click to expand...
Click to collapse
Did you buy a global version phone in China?
You bought a Chinese phone in China with a global installed, if not, where is the problem?
NOSS8 said:
Did you buy a global version phone in China?
You bought a Chinese phone in China to go global, if not, where is the problem?
Click to expand...
Click to collapse
Here what I bought https://www.sunsky-online.com/p/MPH8975M/Xiaomi-Redmi-Note-11-4G-6GB-128GB-Triple-Back-Cameras-Face-&-Fingerprint-Identification-6.5-inch-MIUI-12.5-Helio-G88-Octa-Core-up-to-2.0GHz-Network-4G-Support-Google-Play-Sea-Blue-.htm
I tried some tutorial with SP flash, but it ask me to open the phone and try again witouth battery. Guess I don't have other choice except to pay. It may work you think ?
Terrence5 said:
Here what I bought https://www.sunsky-online.com/p/MPH8975M/Xiaomi-Redmi-Note-11-4G-6GB-128GB-Triple-Back-Cameras-Face-&-Fingerprint-Identification-6.5-inch-MIUI-12.5-Helio-G88-Octa-Core-up-to-2.0GHz-Network-4G-Support-Google-Play-Sea-Blue-.htm
Click to expand...
Click to collapse
Redmi note 11 4g is a chinesse phone with only chinesse firmware.Code name SELENES
https://xiaomifirmwareupdater.com/miui/selenes/
NOSS8 said:
Redmi note 11 4g is a chinesse phone with only chinesse firmware.Code name SELENES
https://xiaomifirmwareupdater.com/miui/selenes/
Click to expand...
Click to collapse
So what Can I do ? Only the solution you send me in DM ?
Terrence5 said:
So what Can I do ? Only the solution you send me in DM ?
Click to expand...
Click to collapse
indeed it is the only solution .
NOSS8 said:
indeed it is the only solution .
Click to expand...
Click to collapse
Well believe it or not, but by using some old tutorial, I manage to fix the brick lol :
How to use MTK Bypass to backup or flash secure boot MTK
This is a step by step guide showing how to flash or backup a Mediatek (MTK) secure boot device without using a custom download agent (DA). This tool disables the SLA / DAA bootrom protection A little
www.hovatek.com
How to use SP Flash Tool
This is a step-by-step tutorial on how to flash stock rom to a Mediatek device using Smart Phone Flash tool. SP Flash tool is one application you could find very useful in fixing extreme cases of a br
www.hovatek.com
I didn't even need to open the phone.
After trying to flash the romm, it succeed but I don't have access to bootloader and the phone never start, stuck on recovery 5.0 and I have this error : Nv data corrupted
Terrence5 said:
Well believe it or not, but by using some old tutorial, I manage to fix the brick lol :
How to use MTK Bypass to backup or flash secure boot MTK
This is a step by step guide showing how to flash or backup a Mediatek (MTK) secure boot device without using a custom download agent (DA). This tool disables the SLA / DAA bootrom protection A little
www.hovatek.com
How to use SP Flash Tool
This is a step-by-step tutorial on how to flash stock rom to a Mediatek device using Smart Phone Flash tool. SP Flash tool is one application you could find very useful in fixing extreme cases of a br
www.hovatek.com
I didn't even need to open the phone.
After trying to flash the romm, it succeed but I don't have access to bootloader and the phone never start, stuck on recovery 5.0 and I have this error : Nv data corrupted
Click to expand...
Click to collapse
I guess you are very confused about your model, in the tittle you put Redmi 10, then you said that you have a Redmi Note 11 Selene, and finally what you have, it´s a Redmi Note 11 4G, that is a different device, so guessing on these facts, you may messed your device flashing the wrong update you find out.
If the issue is still fixable, pay attention on which firmware you download and flash it onto your device, and never use Format all feature through SP Flash tool, otherwise your nvdata, calibration, and basically IMEI, will get corrupted forever.
Probably you need to download and flash a Chinese firmware, check the IMEI number, and go to the Xiaomi site to see if they match https://www.mi.com/global/verify/#/en/tab/imei
Also you have this tool to flash and backup https://github.com/bkerler/mtkclient
SubwayChamp said:
I guess you are very confused about your model, in the tittle you put Redmi 10, then you said that you have a Redmi Note 11 Selene, and finally what you have, it´s a Redmi Note 11 4G, that is a different device, so guessing on these facts, you may messed your device flashing the wrong update you find out.
If the issue is still fixable, pay attention on which firmware you download and flash it onto your device, and never use Format all feature through SP Flash tool, otherwise your nvdata, calibration, and basically IMEI, will get corrupted forever.
Probably you need to download and flash a Chinese firmware, check the IMEI number, and go to the Xiaomi site to see if they match https://www.mi.com/global/verify/#/en/tab/imei
Also you have this tool to flash and backup https://github.com/bkerler/mtkclient
Click to expand...
Click to collapse
Yes I formated the phone... But I put the chinese firmware with a nvdata.img and nvram (found on internet) with SP Flash and the phone work now. Then I've installed the global firmware Selene who was originally on my phone and it still work.
The only problem now, is I don't have IMEI and my Sim isn't detected.
I'm indeed a little consufed about the model. The store said that it's a Redmi note 11, but his global name is Redmi 10 2022.
I'm trying to boot twrp, but i got an error
C:\Users\x\AppData\Local\Android\sdk\platform-tools>fastboot boot recovery.img
Sending 'boot.img' (65536 KB) OKAY [ 1.498s]
Booting FAILED (Status read failed (Too many links))
fastboot: error: Command failed
Terrence5 said:
Yes I formated the phone... But I put the chinese firmware with a nvdata.img and nvram (found on internet) with SP Flash and the phone work now. Then I've installed the global firmware Selene who was originally on my phone and it still work.
The only problem now, is I don't have IMEI and my Sim isn't detected.
I'm indeed a little consufed about the model. The store said that it's a Redmi note 11, but his global name is Redmi 10 2022.
I'm trying to boot twrp, but i got an error
C:\Users\x\AppData\Local\Android\sdk\platform-tools>fastboot boot recovery.img
Sending 'boot.img' (65536 KB) OKAY [ 1.498s]
Booting FAILED (Status read failed (Too many links))
fastboot: error: Command failed
Click to expand...
Click to collapse
New firmware usually fix the nvram issue, but still, strange why the SIM card is not detected, I guess you need to flash more partitions related with nvram to fix at least this part, i.e.check if you have md1img, md2img, nvcfg, you must have a baseband working to can fix the IMEI issue, I mean, to try to fix, unfortunately, in newer Xiaomi devices the IMEI is most likely unrecoverable, anyway, once you can fix the baseband issue, and you have one working, then you can try to rewrite those IMEIs that are in the box, using this tool https://mtktool.com/modemmeta-v10-2044-0-02
If you don't have a back-up from these partitions to restore through a custom recovery, then flashing it, won't help at all, anyway, check that this TWRP version is for your model, R10 2022 claims to be almost the same phone as the predecessor, check the processor, and if the one for R10 also fits for the R10 2022.
Here some steps troubleshooting regarding "too many links" warning https://www.droidwin.com/fix-status-read-failed-too-many-links/
SubwayChamp said:
New firmware usually fix the nvram issue, but still, strange why the SIM card is not detected, I guess you need to flash more partitions related with nvram to fix at least this part, i.e.check if you have md1img, md2img, nvcfg, you must have a baseband working to can fix the IMEI issue, I mean, to try to fix, unfortunately, in newer Xiaomi devices the IMEI is most likely unrecoverable, anyway, once you can fix the baseband issue, and you have one working, then you can try to rewrite those IMEIs that are in the box, using this tool https://mtktool.com/modemmeta-v10-2044-0-02
If you don't have a back-up from these partitions to restore through a custom recovery, then flashing it, won't help at all, anyway, check that this TWRP version is for your model, R10 2022 claims to be almost the same phone as the predecessor, check the processor, and if the one for R10 also fits for the R10 2022.
Here some steps troubleshooting regarding "too many links" warning https://www.droidwin.com/fix-status-read-failed-too-many-links/
Click to expand...
Click to collapse
In the file where I found nvdata and nvram I have this files to. Should I run all ?
I'm actually working trying to use Modem meta, but the phone didn't connect and sometimes I get this error :
I manage to connect to Modem meta with a "ENG" firmwware, and put the Imei. But now I don't know what to do. When I flash to the official chinese firmware, I get nv data corrupt and global version do not boot.
Redmi Note 11 4G (selenes) ENG ROM (Engineering Firmware) – ROMadd
romadd.com

Categories

Resources