Related
Deprecated take a look at this post
Lineage OS unofficial nightlies for the OnePlus One!!
These builds pick up where cm nightlies left off.
I've not made any changes to the source files, so these builds are vanilla Lineage. Builds are made from the repos located at https://github.com/LineageOS
Requirements: You must be running cm already, stable or nightly build.
FAQ:
Q: Can I flash this over a cm nightly that I'm already running?
A: Yes!
Q: Do I need to flash gapps if I was not using a nightly before?
A: Yes!
Q: Are otas available?
A: No, I don't have a server to host the otas on.
Edit: OTAs are now available starting from lineage-14.1-20170104-UNOFFICIAL-bacon.zip.
I plan to post nightlies every day until LineageOS gets a build server setup.
Downloads:
https://www.androidfilehost.com/?w=files&flid=140911
Mirror: https://programming4life.com/dl/bacon/
XDA:DevDB Information
LineageOS, ROM for the OnePlus One
Contributors
Programming4life
ROM OS Version: 7.x Nougat
Version Information
Status: Nightly
Created 2016-12-30
Last Updated 2017-01-23
I might as well go in dry...
.props to the speed.
keep up the good work
*I hope this thread gets merged with cm nightly for bacon*
So far so good.
http://i.imgur.com/R3Q7Hfx.png
Tnx
I'll wait for the official builds.. But, thanks for building it..
I'll flash it when everything is settled..so that data won't be lost..
jkmangang said:
..so that data won't be lost..
Click to expand...
Click to collapse
You'll only lose the data if your not on cm nightly already.
jkmangang said:
I'll wait for the official builds.. But, thanks for building it..
I'll flash it when everything is settled..so that data won't be lost..
Click to expand...
Click to collapse
Save for the kernel string, it's literally an unbranded build of CM.
Functionally identical to the final CM builds for bacon. Same stability.
Programming4life said:
You'll only lose the data if your not on cm nightly already.
Click to expand...
Click to collapse
Thanks for the information.. I'll give it a shot.. ?✌
Not found download section sent me the link
It's at the top of the page.
shivaraj.khangembam said:
Not found download section sent me the link
Click to expand...
Click to collapse
Open site in a browser, look at the top of the page. There will be a tab called "Downloads".
shivaraj.khangembam said:
Not found download section sent me the link
Click to expand...
Click to collapse
http://forum.xda-developers.com/devdb/project/?id=18602#downloads
Cmxlog should switch to lineage gerrit now. There is no any simple place to read changelog
can anyone upload Lineage bootanimation
A$h!$h said:
can anyone upload Lineage bootanimation
Click to expand...
Click to collapse
I don't think Lineage has an official boot logo/animation yet, that's why you see the aosp "android" text.
Good Job @Programming4life
Thanks a lot! So odd question anyway you can make a user build instead of userdebug and with ro.debuggable = 0 ? Once the su disable patch makes it through should be able to run all the apps without deroot and using magisk I think if that's the case. Currently I have to use a bunch of magisk scripts to use Pokemon GO, Miitomo, Android Wear, and Android Pay but currently Android Pay doesn't seem to work but it might be because it's user debug not user according to what this one lineage os dev said.
Also, there are two other bugs YouTube gets stuck on 60fps videos. The last one is it can't play certain wav codec audio files that Allo uses for message sounds.
Other than these few bugs the cm14.1 builds have been almost perfect.
Link_of_Hyrule said:
Thanks a lot! So odd question anyway you can make a user build instead of userdebug and with ro.debuggable = 0 ? Once the su disable patch makes it through should be able to run all the apps without deroot and using magisk I think if that's the case. Currently I have to use a bunch of magisk scripts to use Pokemon GO, Miitomo, Android Wear, and Android Pay but currently Android Pay doesn't seem to work but it might be because it's user debug not user according to what this one lineage os dev said.
Also, there are two other bugs YouTube gets stuck on 60fps videos. The last one is it can't play certain wav codec audio files that Allo uses for message sounds.
Other than these few bugs the cm14.1 builds have been almost perfect.
Click to expand...
Click to collapse
I pass safety net just fine with magiskhide activated.
Just flash the unsu script by osmosis (http://forum.xda-developers.com/showpost.php?p=63615067) and afterwards install magisk and phh superuser zips (don't forget to download the phh superuser app from google play) and enable magisk hide in magisk manager.
Can't talk about android pay though as it's not available in germany
om22 said:
I pass safety net just fine with magiskhide activated.
Just flash the unsu script by osmosis (http://forum.xda-developers.com/showpost.php?p=63615067) and afterwards install magisk and phh superuser zips (don't forget to download the phh superuser app from google play) and enable magisk hide in magisk manager.
Can't talk about android pay though as it's not available in germany
Click to expand...
Click to collapse
Passing SafetyNet let's you play Pokemon GO it doesn't let you use Android Pay or Miitomo.
Miitomo detects that ro.debuggable = 1 in the kernel. There is a magisk script I use to fix this however.
Android Pay requires other things and I was hoping to get a regular user build to see if the gui pops up when I try to use it at a terminal. Currently nothing happens if you touch a terminal even though you pass SafetyNet and can add a card to it. NFC works normally for everything else.
What I was told here https://review.lineageos.org/#/c/154019/
"PGo only detects su and removing (or even renaming) it does the trick. As for Android Pay, it indeed only works in user builds with release keys and verifiedbootstate has to be hidden: https://review.lineageos.org/#/c/152044/."
We have a thread about this for our device. Myself and a few others are trying to get to the bottom of the actual problem and try and fix it. http://forum.xda-developers.com/showthread.php?t=3504989
Update: 10/26/2017 I am moving any further development of Ghost Project Roms to Google Plus Community here
https://plus.google.com/communities/101940281883070515657
I have a non rooted build on my Google Plus community. I left it non rooted so you could use Substratum for Samsung. If you want root just flash Magisk 14.3.
Links are also in the 3rd post. But I am only doing questions from Google Plus.
*******I highly recommend that you run my first build V.1 as it is the best of all of the builds and has the best battery life. But for those of you that really need that security update, I will continue on and try to get this tho run at least to my expectations. Once there, I will re-post the link after it is running better.
The download links and further information are in the second post. http://forum.xda-developers.com/showthread.php?p=70332239
[Rom] [Stock] [Rooted] [Deodexed] [Debloated] [TWRP Flashable Zip] [SM-T350]
I am not a developer. I am an Android enthusiast who, with the help of a few awesome tools, some reading and from a couple of great devs, I was able to build a custom rom from a stock firmware release.
I have been running it now for about 3 weeks and battery life is awesome. I left in just enough Samsung apks too call it a stock rom but not so many to cause it to lag.
I thought that since it was running so nice, I would share it with you. So, without further ado, this is "Ghost Project" rom for the Galaxy Tab A SM-T350 made from (T350XXU1BPE3) stock firmware.
Thanks To:
II am not a developer..... Let me make this clear.. Lol.. I am not a developer. But I did use an awesome tool that allowed me to make this rom "SuperR Kitchen" .... http://forum.xda-developers.com/chef-central/android/kitchen-superrs-kitchen-t3202296/page26
So first and foremost a big thanks goes out to this developer for this awesome tool.
I would also like to give props to Samsung and Sammobile.com for the firmware.
The kernel is from http://forum.xda-developers.com/galaxy-tab-a/development/kernel-galaxy-tab-sm-t555-5-8-2016-t3433560 and is a stock, permissive kernel. By "[ashyx, http://forum.xda-developers.com/member.php?u=4899305 Recognized Contributor]" another awesome dev. This is a stock kernel in every respect with SElinux set to permissive. Please make sure to stop by and thank him as he does some brilliant work and if you like his work dont hesitate to donate to him. This is our only custom kernel for this tablet. Thank you sir for your awesome work.
I would also like to thank and give props to"{FankieT} of {R3Ds themes and Development}" https://plus.google.com/communities/102477541363210451018 for all of his help and guidance. He was who got me started into Linux through Ubuntu and spent many hours teaching this old dog the ways of Android development. You can teach an old dog new tricks..lol
Big thanks to "[ @cbtc https://forum.xda-developers.com/member.php?u=7546403 ]" for his help with some knox questions related issues.
Rom Details:
Use at your own risk. ********You have been warned..*********
Features:
1. Rooted
2. Busybox installed
3. Debloated
4. Zip aligned
5. Deodexed
6. Removed Kies
7. Permissive stock kernel
8. Knox removed
9. Added ES File explorer
10 .Added Nova Launcher
11 .Latest Google Keyboard
And a few other small changes here and there but basically a stripped stock experience.
Kernel:
Here is a link to the kernel developer's thread, who is another awesome dev, who's kernel is the heart of this rom.
http://forum.xda-developers.com/gal...el-galaxy-tab-sm-t555-5-8-2016-t3433560/page8
By "[ashyx, Recognized Contributor]" This is a stock kernel in every reguard with SElinux set to permissive.
A few other small things here and there but mostly stock.
-This is a flashable zip using TWRP recovery and I highly recommend the 2.8.7.0 build as apposed to the 3.0.2.0 build. That is what works for me, your device may like the newer build of TWRP though.
Link to recovery built by "ashyx" an awesome dev...
http://forum.xda-developers.com/galaxy-tab-a/development/recovery-t3426560/page13
-Since this is a stock rom build, gapps are included so no need to flash any gapps.
#####Flashing instructions#######
###MUST BE ON MARSHMALLOW BUILD ****T350XXU1BPE3******#######
So, if you are on a lollipop build (5.0.1) you need to update to 6.0.1 and have TWRP installed........
1. Make a backup onto your external SD card or on a PC using TWRP recovery. This is a very important step as things do go wrong. You have been warned.
2. Wipe. I recommend a clean install with all 4 major wipes done (system, Cache, Dalvik Cache and Data)
3. Flash "Ghost Project v1.0 6.0.1 t350" rom zip.(or which ever one you decide from the list)
4. Wipe both Cache and Dalvik Cache
5. Reboot to system and profit.
The first boot will take a long time to boot. Put the device down and walk away until it boots (could take up to 15 minutes ) but most likely around 7 to 10 minutes. That is because all files are deodexed.
After it boots up Go ahead and set up the device the way you like it and enjoy.
I also have a Google Plus Communitee Called "Hayes Tech Rom Reviews" where you can go to watch reviews/overviews of custom roms for many devices that I own. I have about 20 to 25 devices now and try to do reviews on all the diferent roms out for them. I also have awesome links like the 3Minit battery mod by{made by "gharrington"} for the Nexus 6 and many more things. Please feel free to stop by.
https://plus.google.com/communities/109262972011341635244
**LAST BUT NOT LEAST****USE AT YOUR OWN RISK**
Warning, I am not a developer. All I am doing is sharing my personal build. I am not nor will I be responsible for anyone ruining your device. Thermonuclear war or Loss of job from device not working is your responsibility. And above all this zip will void your warranty.
I can't think of anything else..lol.. This is the first for me so be easy on me. I am going to try to add more custom features and may even add a pure stock rom for total stock experience, let me know... Enjoy.
A video review of my rom... Go here if you would like to see it
https://youtu.be/dVnx709LO7Y
I built another rom for those that want the stock experience but still want it rooted and Knox removed. It is also Zip Aligned and is running the same permissive kernel for Xposed Mods to work better with it. Knox was removed but it is still in the settings menus. I will fix this soon and up!oad another build with that fix.
All downloads with pefix (v.X) are build from same firmware T350XXU1BPE3 When Samsung releases another update the prefix will change to (v1.X).
Download Rom (AFH)
Ghost Project v.1 6.0.1 t350
https://www.androidfilehost.com/?fid=673368273298916139
Ghost Project v.2 6.0.1 t350
https://www.androidfilehost.com/?fid=457095661767126203
Ghost Project v.3 6.0.1 t350
https://www.androidfilehost.com/?fid=457095661767126654
Ghost Project V1.2 6.0.1 t350 Built with latest update T350XXU1BPK2/T350XAR1BPK2
(Comming)
Stock/Rooted/No Extra Apps Added (Stock Samsung Experience)
https://www.androidfilehost.com/?fid=385035244224406713
Stock Firmware flashable with Odin
https://www.androidfilehost.com/?w=files&flid=154234
Xposed Installer Zips (For Samsung Devices) By[" http://forum.xda-developers.com/member.php?u=3562083 "] wanam, Recognized Contributor. You can find his thread here
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Here is my favorite source for custom wallpapers. There are an awesome assembly of some of the best wallpaper designers around.
https://plus.google.com/communities/117666521324982773368
"Chance Favors the Prepared"
Update build: 02-14-2017 Ghost Project V1.2 SM-T350 6.0.1 Built from the Sammobile.com firmware update T350XXU1BPK2/T350XAR1BPK2 with the November security update. This is the latest USA update that I can find. You must be on the T350XAR1BPK2 stock firmware ( flashed with Odin) before flashing this rom. I used TWRP 3.0.2.1 by " @ashyx "
Link to TWRP 3.0.2.1 @ashyx" The builder of this recovery. Make sure to thank him because with out this recovery, we have no way to flash our customs roms with.
http://forum.xda-developers.com/showthread.php?t=3426560
AFH Download link for Ghost_Project_V1.2_SM-T350_6.0.1
https://www.androidfilehost.com/?fid=673368273298931785
To install: you must be on Firmware package T350XXU1BPK2 before flashing this rom. This is the firmware link
https://www.androidfilehost.com/?w=files&flid=154234
You need to install the firmware (unless you are already on this build) with Odin.
Then install TWRP 3.0.2.1 ****DO NOT LET TWRP INSTALL SUPERSU********
Then wipe system, cache, delvic cache and data.
Flash Ghost Project V1.2 SM-T350 6.0.1
Boot to system and enjoy.
After first boot to can flash the "Wanam version of Xposed" in TWRP if you want to use the installed Xposed installer app that I included with this rom.
links to this zip are in the first post.
Do not use any advanced reboot apps to boot to recovery. This may or may not cause you to get stuck in recovery and will not let you boot to system. If this happens to you, don't frett, just power off the device, push power+volume down+home and boot to "Download Mode". Once device load Download screen, press volume up to enter Download mode and plug in the device to your PC. Open Odin and flash TWRP again with auto reboot ticked on in options tab. Your device will then boot to system, after done flashing TWRP. The flags should now be reset to kernel again and you should be good to go once again.
I'm not sure why it does this but it only does with the 3.0.2.1 version of TWRP for this device. The Lollipop version I have had no issue with. But I had issues trying to flash this rom with the older TWRP so I used the 3.0.2.1 version.
If you don't want the Xposed app, just install your favorite system app remover and uninstall it. I use the app so that is why I pre installed it for you all.
The kernel in this rom is pure stock that was supplied in the firmware update. So the kernel source is plain stock Samsung. I tried @ashyx" permissive kernel http://forum.xda-developers.com/showthread.php?t=3433560 with this build and couldn't get my device to boot. Your device may fair better. If it dies with for you, be sure to head over to his thread and give a small donation or at the least thank him.
*****UPDATE*****
Updated to April security patch. Must flash the stock firmware first via Odin. Then re-flash TWRP via Odin. Make sure when flashing TWRP that you have auto reboot turned off in Odin options. After TWRP flash is done, hold Home, volume up and down, and power button till device powers off. Keep holding all buttons except for the volume down and once the device comes to life, let go of the power button and after about 1.5 seconds let go of the jome and volume buttons. You should then boot into TWRP.
I I highly recommend that you do not use any apps to reboot to recovery or you could go into a recovery loop. If that happens you need to reflash TWRP via Odin following the instructions provided above.
This rom is prerooted so you do not have to flash superSu. Also, you need to give it at least 10 to 15 minutes for the first boot.
Have fun and as always this is as is and use at your own risk.
Sorry all, I pulled the build until I can get it running a little smoother. If I don't like the way it runs than I'm not going to give it out to others
I am leaving the firmware link up in case you want to update to the newest build through Odin though but it is unaltered and is straight samsung with no root. Completely stock and not flashable with TWRP.
As soon as I get it running smoothly, I will post the link again
Stock firmware: XAR-T350XXU1BQD1 must flaw using Odin (not a TWRP flashable zip) (completely stock with stock recovery)
https://www.androidfilehost.com/?fid=745425885120730076
md5 75a628efc51737cb328207cadd7977a2
GhostProject_v5.0_ SM-T350_6.0.1 (will repost link once it is running better)
"Chance Favors the Prepared"
GhostProject SM-T350 7.1.1 (stock) (debloated) (knox removed) (zipaligned) (non rooted) (T350XXU1CJ1_XAR)
Again, let me make this clear because the is this one dude it there accusing me if stealing from Samsung. I am not a developer. This is a TWRP flashable stock firmware update to 7.1.1 (latest release). All I did (for now) was to lighten the app load and allow it to be flashed via TWRP. I will be trying to deodex it and strip it even more as time goes on.
All my Thanks goes out to all the same people as in the first post. This is something anyone could do as long as you are running a Linux distro, have some basic rom construction knowledge and a ton of patience. I used @superR kitchen to do this with too. Here is his work and I highly recommend the donate download as the tools include helps a pile.
https://www.google.com/amp/s/forum....android/kitchen-superrs-kitchen-t3202296/amp/
I left root out because a lot of you don't use root for various reasons. If you want root, flash Magisk 14.3.
Must be on the stock firmware (flashed via Odin) first, them but to system. After you boot to system and unlock developer options and USB debugging, boot into bootloader mode again and install TWRP via Odin. In Odin options uncheck "auto reboot to system" when the recovery is done flashing (takes about 1 second) reboot into recovery from the download screen. That locks in TWRP recovery.
You can now make a backup and then flash GhostProject and Magisk 14.3 (if you want root). I will be working on this to trim it down the way I like it but if you like it close to stock than v5.0 if the rom you need.
I will not support questions here. Hi to my Google Plus community for that.
AFH link to stock firmware (T350XXU1CJ1_XAR)
https://androidfilehost.com/?fid=745849072291683960
AFH link to GhostProject SM-T350 v5.0
https://androidfilehost.com/?fid=673791459329056605
"Chance Favors the Prepared"
Palpal link
For those of you that want to make a small donation, I have decided to post my Paypal.me link. It was requested by a few of you and thank you much to those that have donated. Now, donations are not expected or needed to use anything I make and post to the public. But because of my situation lately I decided to go ahead and publicly post this link. Thank you in advance.
https://www.paypal.me/Glockman4519
"Chance Favors the Prepared"
glockman4519 said:
Some screens
Apparently, A there is something up with XDA's servers because I can't seem to get these screen shots uploaded. I will post a Google Drive link with them so you can see them if you want.
https://drive.google.com/folderview?id=0ByTpk6hgHRa5bS1uR3dySExPODg
"Chance Favors the Prepared"
Click to expand...
Click to collapse
Thanks for the updated version of Ghost SM-T350 rom but can you upload v2 on Google Drive? Apparently, I can't access AFH on my school laptop as they have blocked it as a local block website. So if you can upload Ghost v2 on Google Drive by tonight or tomorrow, I would appreciate it.
Thanks.
New update to my Ghost Project builds of stripped down stock firmware. I have stripped it about as far as I am going to go with it so the rom stays dependable. I also removed the ES File Explorer and Nova Launcher apks. I left in the Google Keyboard though as I think it is just a better keyboard.
I am going to build one with root as systemless next for those seeking that want root that way.
AFH download links in the OP.
"Chance Favors the Prepared"
ParadoXGodzillA said:
Thanks for the updated version of Ghost SM-T350 rom but can you upload v2 on Google Drive? Apparently, I can't access AFH on my school laptop as they have blocked it as a local block website. So if you can upload Ghost v2 on Google Drive by tonight or tomorrow, I would appreciate it.
Thanks.
Click to expand...
Click to collapse
Here is the link to my Ghost Project Google Drive shared folder. It has v.1 and v.3 in it.
https://drive.google.com/folderview?id=0ByTpk6hgHRa5X3g5VnBVam9OaDQ
"Chance Favors the Prepared"
glockman4519 said:
Here is the link to my Ghost Project Google Drive shared folder. It has v.1 and v.3 in it.
https://drive.google.com/folderview?id=0ByTpk6hgHRa5X3g5VnBVam9OaDQ
"Chance Favors the Prepared"
Click to expand...
Click to collapse
Thanks.
@glockman4519 I just wanted to take a minute and say thank you so much for this ROM. I appreciate all your hard work. I am so happy to FINALLY find a ROM with bloatware removed and with awesome battery life. My deepest thanks to you. I will follow this thread for any updates. Keep up the GREAT work!
alias4ever said:
@glockman4519 I just wanted to take a minute and say thank you so much for this ROM. I appreciate all your hard work. I am so happy to FINALLY find a ROM with bloatware removed and with awesome battery life. My deepest thanks to you. I will follow this thread for any updates. Keep up the GREAT work!
Click to expand...
Click to collapse
You are very welcome. I'm glad that it is working out for you.
glockman4519 said:
You are very welcome. I'm glad that it is working out for you.
Click to expand...
Click to collapse
It is working very well and after a few days use of it I can't believe the battery life on this ROM! WOW! A HUGE thumbs UP! :good::highfive:
Installation?
Hey,
I tried to flash it and nothing happened, operator error I believe . Does the build have to be T350XXU1BPE3 or can it be an updated Marshmallow build? Like to flash your V.3 could I have the latest firmware or would I have to flash (odin) that specific build?~Thanks, C
Edit: I beat you to it, I read the first couple of paragraphs at the beginning of you OP again. You clearly said it was built from/for T350XXU1BPE3. Sorry for breaking my own rule...
ConnerJSP said:
Hey,
I tried to flash it and nothing happened, operator error I believe . Does the build have to be T350XXU1BPE3 or can it be an updated Marshmallow build? Like to flash your V.3 could I have the latest firmware or would I have to flash (odin) that specific build?
~Thanks, C
Edit: I beat you to it, I read the first couple of paragraphs at the beginning of you OP again. You clearly said it was built from/for T350XXU1BPE3. Sorry for breaking my own rule...
Click to expand...
Click to collapse
No need for apologies. I'm not a dev and don't mind questions. But as you found out, you do need to have the latest or the firmware that I posted, already installed via Odin. It's a Samsung thing. Lol... Hope v3 is working good for you. : )
glockman4519 said:
No need for apologies. I'm not a dev and don't mind questions. But as you found out, you do need to have the latest or the firmware that I posted, already installed via Odin. It's a Samsung thing. Lol... Hope v3 is working good for you. : )
Click to expand...
Click to collapse
Yes I did find out. So I successfully flashed it and it is really great work, nice job! My only concern is the outdated android security patch level, which is to be expected since the ROM is based off an old build. Do you have intentions on updating that?
ConnerJSP said:
Yes I did find out. So I successfully flashed it and it is really great work, nice job! My only concern is the outdated android security patch level, which is to be expected since the ROM is based off an old build. Do you have intentions on updating that?
Click to expand...
Click to collapse
As soon as Samsung releases a security update. You know how Samsung is with updates.
I also have a build with Magisk systemless root that I will upload later. If anyone wants to use Magisk as apposed to SuperSu
glockman4519 said:
As soon as Samsung releases a security update. You know how Samsung is with updates.
I also have a build with Magisk systemless root that I will upload later. If anyone wants to use Magisk as apposed to SuperSu
Click to expand...
Click to collapse
When I flashed the V.3, I recall it having May 1, 2016 patch level. The latest update has November 1, 2016. Is that what you mean, or some source code they haven't put out yet? And I looked up what Magisk s but didn't really understand it... What would be the advantages of using it over SuperSU?
Edit: I just reflashed V.3 and noticed that it was using the build one of your ROM and the installer for Ghost Project v1 6.0.1 installer. Is this using the wrong version or is that supposed to say that? (See photo)
Update: Well, confirmed build is V.3. Must have just been displayed incorrectly. Nonetheless, working flawlessly.
ConnerJSP said:
When I flashed the V.3, I recall it having May 1, 2016 patch level. The latest update has November 1, 2016. Is that what you mean, or some source code they haven't put out yet? And I looked up what Magisk s but didn't really understand it... What would be the advantages of using it over SuperSU?
Edit: I just reflashed V.3 and noticed that it was using the build one of your ROM and the installer for Ghost Project v1 6.0.1 installer. Is this using the wrong version or is that supposed to say that? (See photo)
Update: Well, confirmed build is V.3. Must have just been displayed incorrectly. Nonetheless, working flawlessly.
Click to expand...
Click to collapse
I never got around to changing the info in the build prop. V3 is just the latest in evelutions of my builds. It is still same firmware base as V.1 when I see a later version of samsungs firmware build showing, I will update this and the build number system will change to v1.1. As for Magisk, it was requested by a few people and from what I was told, they were having issues getting it to work with this tablet. I got it working. It still does not pass safety net though. I dont think it is going to that easy to byoass the safety net and still be rooted.
All my rom does is take the stock firmware and reliably debloat it enough to give you an outstanding battery experience. Thats it. There were no custom roms out for this device, when I started this project, and that is the only reason that I am sharing this. There is another great rom out now called "Fenix rom" so maybe I will see where his rom goes. It looks good.
As I stated earlier. i am not a developer. I understand a lot that goes into a rom and how to get it. But I am basing my builds on firmware releases from Samsung and untill Samsung releases another update, my hands are tied.
Thank you for the feedback.
"Chance Favors the Prepared"
Hey,
I'm looking forward to the inclusion of Magisk, I'm currently using a custom ROM that has it preinstalled. Wasn't sure how to use it at first but I see it mainly as an all around manager, and acts likes Xposed with the modules.
With that said, will you be using Chainfire's SuperSU or phh's superuser for the root (systemless?)?Cheers, CJSP
ConnerJSP said:
Hey,
I'm looking forward to the inclusion of Magisk, I'm currently using a custom ROM that has it preinstalled. Wasn't sure how to use it at first but I see it mainly as an all around manager, and acts likes Xposed with the modules.
With that said, will you be using Chainfire's SuperSU or phh's superuser for the root (systemless?)?Cheers, CJSP
Click to expand...
Click to collapse
Not yet mate. I'm trying to find a workaround for this. There might be other posts on XDA that might help you.
ConnerJSP said:
Hey,
I'm looking forward to the inclusion of Magisk, I'm currently using a custom ROM that has it preinstalled. Wasn't sure how to use it at first but I see it mainly as an all around manager, and acts likes Xposed with the modules.
With that said, will you be using Chainfire's SuperSU or phh's superuser for the root (systemless?)?Cheers, CJSP
Click to expand...
Click to collapse
I tried several times, several different ways but still can't get it to install on the initial install. This is more than my skills can figure out...Lol... I'm done with Magisk for a while on this device. It's an issue in the installer script I think.
"Chance Favors the Prepared"
Hi all,
I just modified the module from @snowwolf725 to have a newer template so it can run on oreo rom
If you need to use nfc-sim on oneplus 3/3t you could try this module.
[Install]
1. Get Magisk
2. In the download area search for "OnePlus 3/t NFC Sim Enabler"
3. Reboot
4. If your manage app require permission you can give it at settings-apps-app permissions-additional permissions, toggle smartcardservice for it
I only test it on OOS Oreo ROM, it may not work on custom rom due to different framework built in.
You can report here so I'll check what other MOD have to add to make other ROM work.
the smartcardservice is modified from SEEK for Android by Johnzweng
Repo link
crazymika said:
Hi all,
I just modified the module from @snowwolf725 to have a newer template so it can run on oreo rom
If you need to use nfc-sim on oneplus 3/3t you could try this module.
[Install]
1. Get Magisk
2. In the download area search for "OnePlus 3/t NFC Sim Enabler"
3. Reboot
4. If your manage app require permission you can give it at settings-apps-app permissions-additional permissions, toggle smartcardservice for it
I only test it on OOS Oreo ROM, it may not work on custom rom due to different framework built in.
You can report here so I'll check what other MOD have to add to make other ROM work.
the smartcardservice is modified from SEEK for Android by Johnzweng
Repo link
Click to expand...
Click to collapse
Any chance that this mod used on htc m9 with aicp 13.1, rooted with magisk?
tombbb said:
Any chance that this mod used on htc m9 with aicp 13.1, rooted with magisk?
Click to expand...
Click to collapse
I don't think so, it's NFC chip specified so if you have a different device it's xml config would be different.
For m9 you could look through it's stock rom to adjust configuration, I believe the M9 stock ROM support NFC-SIM card.
What does nfc sim means?
prasant737 said:
What does nfc sim means?
Click to expand...
Click to collapse
In some places we have our payment/transportation card integrated in SIM card.
so we can use our phone to pay/take public transportation.
hi sir able to update it for oneplus 6t android pie?
laocheebye said:
hi sir able to update it for oneplus 6t android pie?
Click to expand...
Click to collapse
according your ID I assume you are Taiwanese, there is modification for oneplus 6 on mobile01, i think that will also work for 6t
I didn't have 6t so I can't test on it.
crazymika said:
according your ID I assume you are Taiwanese, there is modification for oneplus 6 on mobile01, i think that will also work for 6t
I didn't have 6t so I can't test on it.
Click to expand...
Click to collapse
i am singaporean actually. can u link me the thread? i can read chinese so its fine. thank you deep deep.
---------- Post added at 02:27 PM ---------- Previous post was at 02:12 PM ----------
i found the thread and the download link if anyone is interested to try for oneplus 6 or 6t.
forum link in chinese
flashable zip
i havent tried cos there is no decrypt twrp for 6t yet so at your own risk people.
I had asked about it to the author directly on github since since my test are not successful. No update since then...
https://github.com/Magisk-Modules-Repo/oneplus3simnfc/issues/2
NoobZik said:
I had asked about it to the author directly on github since since my test are not successful. No update since then...
https://github.com/Magisk-Modules-Repo/oneplus3simnfc/issues/2
Click to expand...
Click to collapse
I'll update this to pie compatible when oos pie released
crazymika said:
I'll update this to pie compatible when oos pie released
Click to expand...
Click to collapse
Hello, any news ?
Hi, just tried the latest v1.2.1, but it seems HamiPay detects root even MagiskHide enabled for it. Would you please share how to prevent HamiPay from detecting root? Thank you.
jekyll530 said:
Hi, just tried the latest v1.2.1, but it seems HamiPay detects root even MagiskHide enabled for it. Would you please share how to prevent HamiPay from detecting root? Thank you.
Click to expand...
Click to collapse
I think they changed the root detection, now it's can only use with iPASS, EasyCard or icash.
Creditcard function have been lock with rooted devices.
crazymika said:
I think they changed the root detection, now it's can only use with iPASS, EasyCard or icash.
Creditcard function have been lock with rooted devices.
Click to expand...
Click to collapse
Thank you for replying. The above seems work fine. Can this module be ported for OP5/T, 6/T (OOS 9.0) or even 7/Pro?
Cuvillier said:
Hello, any news ?
Click to expand...
Click to collapse
I've update to Pie rom, and confirm that we still can use sim NFC at it, just need some path adjustments, use the attached zip file replace your system/vendor/etc/libnfc-nxp.conf, put the SmartcardService folder in system/priv-app folder
add this line "persist.nfc.smartcard.config=SIM1,eSE1" in system/build.prop file, and should work as before.
I forgot how to make it into proper Magisk Module~the module i made tonight can't not be installed.... so strange. I'll update once i get it to work.
P.S.
I tried custom ROMs, they have many differences about NFC config, I can not get it to work even replace the framework and permission file, tried everything I know but still failed, maybe they missed something at more lower level.
updated for OOS Pie
I just found what's wrong.
Here's the updated Module for OOS Pie.
Later i'll update to Modules-Repo
jekyll530 said:
Thank you for replying. The above seems work fine. Can this module be ported for OP5/T, 6/T (OOS 9.0) or even 7/Pro?
Click to expand...
Click to collapse
@snowwolf725 have created the OP5 module, 6/6t have other method to make it working,but I need check some of it's file to make sure, op7 should work in theory, but it still depend on some rom configuration. I only have a op3t, do don't know how other models work.
Currently OOS have proper components (driver, config, frameworks...) installed, so it easier to enable them, for custom rom or future builds(which OP3 won't have)
I believe that require more adjustments to have this feature working.
crazymika said:
@snowwolf725 have created the OP5 module, 6/6t have other method to make it working,but I need check some of it's file to make sure, op7 should work in theory, but it still depend on some rom configuration. I only have a op3t, do don't know how other models work.
Currently OOS have proper components (driver, config, frameworks...) installed, so it easier to enable them, for custom rom or future builds(which OP3 won't have)
I believe that require more adjustments to have this feature working.
Click to expand...
Click to collapse
The OP5/T module is not available via Magisk download now. I'm currently using OP5 and will buy a 7 Pro. If you need, I can help testing.
crazymika said:
@snowwolf725 have created the OP5 module, 6/6t have other method to make it working,but I need check some of it's file to make sure, op7 should work in theory, but it still depend on some rom configuration. I only have a op3t, do don't know how other models work.
Currently OOS have proper components (driver, config, frameworks...) installed, so it easier to enable them, for custom rom or future builds(which OP3 won't have)
I believe that require more adjustments to have this feature working.
Click to expand...
Click to collapse
thanks but it doesn't work on lineage os 16. in logcat i get keymaster operation failed and unsupported digest on km1 hal issue. i hope you can fix it
regards
Hello!
Please forgive me as it's been a long time since I made/posted a stock based ROM as I have been mainly doing security research and dealing more with source code last few years.
Most seasoned Samsung users on here probably already know me and work that I have done so I won't waste time posting any "about me" stuff.
DISCLAIMER:
This ROM is still WIP (although fully functional) and based on Android R Beta 1ZTJG for G988U/U1/W. An unlocked BL is required to flash this ROM! This ROM contains bootloader files specific to U/U1/W so likely will NOT WORK on hk/china/exynos/any other models that are not U/U1/W so don't ask. If you do decide to flash it and try it out and if your device blows up then that is your own fault.
Features:
- Based on Stock R Official Build aka 1CTKH.
- This is a full ODIN flashable tar (got tired of messing with update zips.)
- Disabled vbmeta
- Pretty heavily debloated
- Deknoxed
- Removed pesky recovery-from-boot.p which could cause boot loops.
- Currently only has SPR csc mods (will mod others in next build)
*Native call recording
*App Lock (forgot to push the app though so will fix in next build)
*Few others.. will post more specifics and give creds since I used the csc mod for exynos as a basis..
- Probably forgetting something but thhis is an initial build so will add more as time goes..
Instructions:
- Backup your data if you must since this will wipe device!
- Put phone in dl mode and extract zip to pc somewhere.
- Open ODIN and in AP slot navigate to SamPWND.R.Official-G988U.tar and flash it.
- Device will reboot into stock CTKH recovery where you will wipe data and reboot.
- Set up device and win?
Root Steps (optional):
Note: Custom kernels can be used since source code for R is released.
EDIT: There is now a working recovery which will be available in post 2.
- After you have flashed rom and everything is set up reboot back into DL mode.
- Open included ODIN and in AP slot navigate to the 1BTHD_BL_and_Recovery_For_Root.tar. Make sure auto reboot is NOT selected. Flash it.
- Once thats flashed hold vol down and power until screen turns off then immediately hold vol up and power until LOS recovery loads.
- However you want to flash magisk (I included Magisk.v21.0.zip) flash it.
* I do adb push magisk.zip /... Then select Install Update then install from root and select magisk zip...
- Reboot back into DL mode.
- In ODIN, select AP slot then navigate to 1ZTJG_BL_and_Recovery.tar and flash it.
- Device will boot back into ROM and you will now be rooted!
***TWRP RECOVERY***
- Download listed below
- I suggest you follow all the steps above and make sure it's up and running before installing TWRP.
- Basically extract the twrp download below, create it into a .tar file using 7zip or something and flash it in ODIN.
- adb works
- file manager and other tools work
- If follow above steps first as recommended, data will be decrypted.
- mounts work
- flashing works
- backup/restore works
- no issues found so far?
Steps are really quite simple if you have ever used ODIN.
Latest ROMS can now be accessed here:
ROMS | SamPWND
www.sampwnd.com
I will create a Telegram ROM support group soon where you can ask all the questions you want there (I am not at liberty to discuss unlocking bootloader on XDA so any questions directed towards this or the ROM itself then join the Telegram group for questions and ROM support.)
TELEGRAM ROM SUPPORT GROUP CLICK HERE
ENJOY!
Shout Outs:
@topjohnwu for Magisk of course
@jesec for LOS Recovery
@afaneh92 base TWRP
@Mentalmuso for direction on how to get TWRP to work on R!
More shout outs coming soon!
Downloads will be in post 2.
ROM Updates Are Located Here
SamPWND.R4.v1-G988U1 Download
G988U1-R-TWRP Download
ROM Questions and support and SamPWND support in general if you have ANY questions then join this Telegram Group chat!
CHANGELOG and Other Updates:
12/10/2020
- SamPWND.R.Official-G988U is latest build
- Base updated to 1CTKH Official R
- Same features as original release
- Removed less bloat since some things were broke
- Left csc decoded so you can make your own edits directly without having to decode it and flash it or whatever.
10/31/2020
- SamPWND.R4.v1-G988U1 is initial build/upload
- SamPWND.R4.v1-G988U1.TWRP.Recovery is initial upload for TWRP recovery that works on R firmware
- Added Telegram ROM support link to OP and second post.
Delete..
this is amazing!! hope you do this to the ZTJN build for Snapdragon <3 excellent work on this though , thank you!!
mysticjp said:
this is amazing!! hope you do this to the ZTJN build for Snapdragon <3 excellent work on this though , thank you!!
Click to expand...
Click to collapse
I want something for smg9860
mysticjp said:
this is amazing!! hope you do this to the ZTJN build for Snapdragon <3 excellent work on this though , thank you!!
Click to expand...
Click to collapse
when its released and update.zip is posted sure
bodomfan said:
I want something for smg9860
Click to expand...
Click to collapse
i dont own that model.. i dont like releasing for devices i cant test or troubleshoot issues on.
ZTJQ is latest =o
*prays* for this stock rom/firmware modicification and enchancement.. for the current build
g988u1 BTIG https://drive.google.com/u/0/uc?export=download&confirm=BReC&id=1nZQ6Qr_C4Yx5SroJey02rob_En2HX3Ge
988U1-BTIG to ZTJA.zip https://1drv.ms/u/s!AmeN999T4X8UhP07wOFGOhRmsW0zMw?e=Qabkdx
988u1-ztja.To.Ztjg https://1drv.ms/u/s!AmeN999T4X8UhP061TYuDPuYN3Bqwg?e=UaZlIs
G988U1 Beta 3, ZTJG To ZTJQ https://1drv.ms/u/s!AmeN999T4X8UhP4NKKEqVocq_6siIg?e=hamgdf
mysticjp said:
ZTJQ is latest =o
*prays* for this stock rom/firmware modicification and enchancement.. for the current build
Click to expand...
Click to collapse
yes i know.. im a busy person lately lol im already working on it tho
mysticjp said:
g988u1 BTIG https://drive.google.com/u/0/uc?export=download&confirm=BReC&id=1nZQ6Qr_C4Yx5SroJey02rob_En2HX3Ge
988U1-BTIG to ZTJA.zip https://1drv.ms/u/s!AmeN999T4X8UhP07wOFGOhRmsW0zMw?e=Qabkdx
988u1-ztja.To.Ztjg https://1drv.ms/u/s!AmeN999T4X8UhP061TYuDPuYN3Bqwg?e=UaZlIs
G988U1 Beta 3, ZTJG To ZTJQ https://1drv.ms/u/s!AmeN999T4X8UhP4NKKEqVocq_6siIg?e=hamgdf
Click to expand...
Click to collapse
dont really need this posted in here lol might confuse ppl plus theres already a thread dedicated to updates whereas this is my custom rom thread
oh im sorry, how does one delete their own post?
mysticjp said:
oh im sorry, how does one delete their own post?
Click to expand...
Click to collapse
You can't delete it but you can edit it.
i cant edit that post with the links, theres no edit button
mysticjp said:
i cant edit that post with the links, theres no edit button
Click to expand...
Click to collapse
its all good lol. not a lot of traffic here anyways.. just dont want ppl askin for support on doing ota updates lol
reply..
lol true , cant wait for yor ZTJQ 988u1 enhanced stock firmware rom release..
---------- Post added at 10:08 AM ---------- Previous post was at 10:07 AM ----------
i kno it is not yor only function in life but i just am yerning for it before theres a newer build :gryn:
mysticjp said:
lol true , cant wait for yor ZTJQ 988u1 enhanced stock firmware rom release..
---------- Post added at 10:08 AM ---------- Previous post was at 10:07 AM ----------
i kno it is not yor only function in life but i just am yerning for it before theres a newer build :gryn:
Click to expand...
Click to collapse
i got it built but found a few issues.. i overdid it lol gotta fix usb debugging and fstab
mysticjp said:
g988u1 BTIG https://drive.google.com/u/0/uc?export=download&confirm=BReC&id=1nZQ6Qr_C4Yx5SroJey02rob_En2HX3Ge
988U1-BTIG to ZTJA.zip https://1drv.ms/u/s!AmeN999T4X8UhP07wOFGOhRmsW0zMw?e=Qabkdx
988u1-ztja.To.Ztjg https://1drv.ms/u/s!AmeN999T4X8UhP061TYuDPuYN3Bqwg?e=UaZlIs
G988U1 Beta 3, ZTJG To ZTJQ https://1drv.ms/u/s!AmeN999T4X8UhP4NKKEqVocq_6siIg?e=hamgdf
Click to expand...
Click to collapse
so I just flash BTIG and then flash the rest in stock recovery right?
Smartphones13 said:
so I just flash BTIG and then flash the rest in stock recovery right?
Click to expand...
Click to collapse
No that content is not meant for this page
Intro(Skip at your wish xd):
Hello guys, it's kind of frustrating that our 4a 5G don't get much love here(in custom ROM development perspective) as Pixel 5 as it's not really a "main" variant.
For myself, I love Pixel devices for Google releases "proper" device tree and most necessary stuff, but still it require quite some time for me to get things right and a working ROM build, hell, to be honest, I spent like about 30 hrs already as this is my first time to use AOSP tree + vendor blobs from Google site to build ROMs)
Despite the lack of previous experience, the first build that I'm releasing here, is working quite well, I haven't discovered any (device-specific) bug just yet, anyway, let's continue
Click to expand...
Click to collapse
Instructions:
0. Make sure your bootloader is unlocked
1. Download ROM zip from the link below, and grab Magisk patched boot.img inside the folder as well if you want root access
2. Reboot to bootloader
2.5. Flash updated bootloader.img and radio.img from Google site
3. Use `fastboot -w update LineageOS_microG-bramble-(BUILD DATE HERE)-userdebug-signed.zip` to flash
and yes, you can omit the "-w" parameter if you're not flashing for the first time, aka just updating from previous release
4(optional). Hopefully after flashing you'll be booted into LineageOS, reboot to bootloader again,
and flash the Magisk patched boot.img extracted from the 7z file with `fastboot flash boot magisk_patched.img`,
reboot after finished
5. Enjoy!
Click to expand...
Click to collapse
Features:
1. MicroG integrated nicely (Thank OmniROM dev([email protected]) for the repo)
2. Replaced default WebView with Bromite WebView
3. Default DNS was set to UncensoredDNS in framework overlay
4. Removed unnecessary prebuilt APKs
Click to expand...
Click to collapse
Download
Contacts:
Telegram:
Channel for Pixel 4a 5G related stuff
Group for Pixel 4a 5G discussion
Special thanks: @kdrag0n , @akhilnarang for helping me with issues when I couldn't get my build working
XDA:DevDB Information
LineageOS 18.1 - microG Edition, ROM for the Google Pixel 4a 5G
Source
ROM
Kernel
Contributors
dic1911
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Current
Based On: LineageOS
Version Information
Status: Testing
Created 2020-11-29
Last Updated 2020-12-16
Current Known Issue
1. Some minor bubble notification glitch, ROM side issue.
2. Video call is unstable, crashes in about ~10 minutes after the call starts (untested in latest update, may be fixed)
3. If mobile data doesn't work after update, try select/set APN manually(select whatever APN first, then select the correct one after)
Reserved
Awesome, thank you!
I've never heard of the MicroG before so just looked that up. I'm loving that philosophy so I'm definitely gonna be checking that out! Thanks! My pixel is arriving tomorrow so after playing around with it first, I'll try out your ROM once there's more responses from others here.
Hey thx for the ROM is a A11 Version planned?
I'll wait for Android 11 version
Dimontiman said:
Hey thx for the ROM is a A11 Version planned?
Click to expand...
Click to collapse
warrencoakley said:
I'll wait for Android 11 version
Click to expand...
Click to collapse
LineageOS 18.0 is Android 11, but XDA didn't update the option menu so I chose Android 10.
View attachment 5144565
Took a while for this thread to pop back up after forum migration..
Thanks for the awesome work
Is anyone using this ROM as their daily driver? I'm still reluctant to risk my warranty
I guess I will roll the dice and give it a go. Anyone know if this will affect my e-sim with Google Fi?
Thank you, dic1911 for being so awesome to bring first rom to Bramble, which is almost brand-new! I appreciate your work and we are really glad for it.
Joegrizz said:
I guess I will roll the dice and give it a go. Anyone know if this will affect my e-sim with Google Fi?
Click to expand...
Click to collapse
It won't affect Google Fi.
Thanks. It looks great and runs good but I’m obviously missing something. I tried installing GApps via ADB side load and no matter which size Nikhil version I attempt to install, I get an error there’s not enough memory. I’ve rebooted after flashing to the rom and also done a factory reset to no avail. What am I missing? I’ve also tried it with and without the patched boot.img.
tgilmore16 said:
Thanks. It looks great and runs good but I’m obviously missing something. I tried installing GApps via ADB side load and no matter which size Nikhil version I attempt to install, I get an error there’s not enough memory. I’ve rebooted after flashing to the rom and also done a factory reset to no avail. What am I missing? I’ve also tried it with and without the patched boot.img.
Click to expand...
Click to collapse
Use systemless WeebGapps via Magisk:
t.me/WeebGAppsChannel
Does this rom use seedvault like mainline lineageos? Or is google backup in here even with microg?
Crashdown1994 said:
Is anyone using this ROM as their daily driver? I'm still reluctant to risk my warranty
Click to expand...
Click to collapse
Warranty? Should not effect that. I wouldn't think it would. Bootloader is unlockable and google even gives the option to flash aosp vanilla(no google) or public (official google rom) with their flashing tool (via chrome browser).
Are Pixel-Exclusive features such as Now Playing, Live Captions, Call Screening, Adaptive Sound, Screen Attention included and working?
Any issues getting safetynet to pass?
GoldElocks said:
Are Pixel-Exclusive features such as Now Playing, Live Captions, Call Screening, Adaptive Sound, Screen Attention included and working?
Any issues getting safetynet to pass?
Click to expand...
Click to collapse
This is Lineage... You install this one to get privacy and free yourself from Gapps. You might be able to get most features running, but then you just can stay with stock - privacy is then gone again...
letrain02 said:
Does this rom use seedvault like mainline lineageos? Or is google backup in here even with microg?
Click to expand...
Click to collapse
SeedVault is builtin system app for all LineageOS builds, no matter it's official or not, if it's not there in someone else's build, either it's removed by the builder or the build is too old.
So yes, SeedVault is in my build, but there's no guarantee that it works with any apps just like Google Backup(which I found pretty much useless in my case)
PS. I'm not really as active as I was on xda since about 2 years ago, please join Telegram for more updated stuff
PPS. I released GCam extracted from stock ROM and modified to make it work on LineageOS(and pretty much any custom ROM with right stuff baked in), and yes, you'll need to flash updated build from my Telegram channel (It's more convenient for me to upload to Telegram as the storage space there is unlimited)
LineageOS 18.1 is up!
Now with December security patch, grab it from the link in OP