View 10 - BKL-L04 - Bringing it all together - Honor View 10 Guides, News, & Discussion

My phone is an Honor View 10 model BKL-L04 (American model) build 8.1.0.133 (C567GT).
These are the steps that I used to remove the stock firmware and recovery and replace them with something more to my taste. I did < 1% of the actual work here, I'm just putting everything that I did in once place so that other people may not have to look so hard to find answers.
Requirements
View 10 - If you don't have one then you're in the wrong place. Do NOT follow these directions for any other phone as both the directions and the links are specific to the model mentioned above.
Cash/PayPal - Most of us don't have the skills to pry out the bootloader unlock code ourselves so we must pay someone who does. God knows the manufacturer isn't going to help us out here
SD Card - You can probably get this done purely on internal storage, but weren't you going to put in a nice, big SD card anyway?
SD Card Writer (optional) - You'll need a way to load files onto the card prior to flashing. IMHO getting an SD card writer is the simplest way, but to each their own.
Unlocking
This guy will get you an unlock code for your View 10 for $22 (USD). Order a Bootloader Unlock Code, select the Huawei option "with IMEI", put BOTH of your IMEI numbers in the comments field, submit it and pay via PayPal. I got a code in about an hour. Once you have the code you can follow these directions to perform the unlocking process. If you need a bit more help getting though it then try this guide.
Flash Recovery
Don't use the official TWRP images. As of Dec 8, 2018 neither 3.2.1-0 nor 3.2.1.-1 worked for me (-0 dropped to fastboot after a few seconds and -1 caused a bootloop when entering recovery). Use the latest unofficial image from this page. Directions included. More detailed directions can be found here but make sure to use the TWRP image from the first link.
Copy Zips
Now pick out a ROM (I went with LineageOS 15.1) and copy all the zips you need to your SD card. The list probably includes the ROM itself, gapps, and some type of su/root package. Put them all on your card.
Flash ROM
If you're going with LIneageOS 15.1 as I did then this guide should get you the rest of the way. It has the links for the ROM itself as well as gapps and the su package. Again, be very careful to match exactly your phone model and architecture (arm64 for the View 10) when grabbing these packages.
Extras
You can find the latest stock firmware image for the BKL-L04 here. Be damn sure your phone matches mine before you use it! If you need to pull out the stock recovery for any reason, you can use the update extractor to do this (grab recovery_ramdisk), then flash it the same way you flash TWRP.
Good luck and have fun! I'll try to help if you get stuck but the real knowledgeable people are those that wrote the articles I've linked to.
Cheers!
- E

Is "twrp_bkl_0.7.img" the latest one?

As of Dec 9 I believe it is, yes.

Eimafn said:
As of Dec 9 I believe it is, yes.
Click to expand...
Click to collapse
It installed but it keeps saying unable to unmount system so I can't backup or flash a new rom.

MikeyJay530 said:
It installed but it keeps saying unable to unmount system so I can't backup or flash a new rom.
Click to expand...
Click to collapse
I didn't have that issue when I was first flashing the ROM, but I do now. If you're having it prior to flashing your ROM would it be because you didn't wipe & format beforehand? The guide I linked in step 5 leads you through this procedure if you need it.
As far as the unmounting error, I think that's something we'll have to live with until the issue is corrected in TWRP.
- E

Eimafn said:
I didn't have that issue when I was first flashing the ROM, but I do now. If you're having it prior to flashing your ROM would it be because you didn't wipe & format beforehand? The guide I linked in step 5 leads you through this procedure if you need it.
As far as the unmounting error, I think that's something we'll have to live with until the issue is corrected in TWRP.
- E
Click to expand...
Click to collapse
Then how can I flash a custom rom?

MikeyJay530 said:
Then how can I flash a custom rom?
Click to expand...
Click to collapse
I think it works if you wipe/format first. The guide I linked walks you through this.

Eimafn said:
I think it works if you wipe/format first. The guide I linked walks you through this.
Click to expand...
Click to collapse
I did wipe/format first lol still messed up

MikeyJay530 said:
I did wipe/format first lol still messed up
Click to expand...
Click to collapse
Hmm. Well, you can either try one of the official builds (here) or wait for the guy doing our customized build to fix this issue. You might even post a note on this thread describing your issue so that he can track how many people are having it.
Sorry I couldn't be more help. The View 10 is not the easiest phone to work with by a long shot.
- E

MikeyJay530 said:
I did wipe/format first lol still messed up
Click to expand...
Click to collapse
You should do it from emui settings not from twrp .

miststudent2011 said:
You should do it from emui settings not from twrp .
Click to expand...
Click to collapse
What do you mean?

MikeyJay530 said:
What do you mean?
Click to expand...
Click to collapse
You have told that you have formatted your device, if you have formatted it from twrp it will cause issues, you should format it from emui system settings.

miststudent2011 said:
You have told that you have formatted your device, if you have formatted it from twrp it will cause issues, you should format it from emui system settings.
Click to expand...
Click to collapse
No I need to do it in TWRP if I want to install a custom rom...lol

MikeyJay530 said:
No I need to do it in TWRP if I want to install a custom rom...lol
Click to expand...
Click to collapse
Seriously you are laughing at me for trying to help you ?
I need to do it in TWRP if I want to install a custom rom --> Where did you get it ?
Currently available TWRP are buggy and are causing issues.

miststudent2011 said:
Seriously you are laughing at me for trying to help you ?
I need to do it in TWRP if I want to install a custom rom --> Where did you get it ?
Currently available TWRP are buggy and are causing issues.
Click to expand...
Click to collapse
Noooo I'm laughing because I'm confused lol I got the twrp from the link on this thread.

MikeyJay530 said:
Noooo I'm laughing because I'm confused lol I got the twrp from the link on this thread.
Click to expand...
Click to collapse
TWRP is not needed if you try to flash openkirin roms they are among the best roms available right now for this device. go to openkirin.net for more details.

miststudent2011 said:
TWRP is not needed if you try to flash openkirin roms they are among the best roms available right now for this device. go to openkirin.net for more details.
Click to expand...
Click to collapse
I'm wanting to flash Pixel Experience though.
---------- Post added at 08:21 AM ---------- Previous post was at 08:06 AM ----------
miststudent2011 said:
TWRP is not needed if you try to flash openkirin roms they are among the best roms available right now for this device. go to openkirin.net for more details.
Click to expand...
Click to collapse
Also, how do I get TWRP off my phone so I have EMUI recovery back?

MikeyJay530 said:
I'm wanting to flash Pixel Experience though.
---------- Post added at 08:21 AM ---------- Previous post was at 08:06 AM ----------
Also, how do I get TWRP off my phone so I have EMUI recovery back?
Click to expand...
Click to collapse
Download full firmware package from firmware finder and extract recovery from update.app and flash it ,
BTW what is your current phone state ?

miststudent2011 said:
Download full firmware package from firmware finder and extract recovery from update.app and flash it ,
BTW what is your current phone state ?
Click to expand...
Click to collapse
Is there a guide for that? Sorry I'm new with this phone. My phone is unlocked.

MikeyJay530 said:
Is there a guide for that? Sorry I'm new with this phone. My phone is unlocked.
Click to expand...
Click to collapse
What is your phone current state, you have just flashed only twrp or any other changes ?
did you format your phone through emui settings before flashing twrp ?
what build are you on currently ?

Related

(Q) How do I keep root with Lollipop

Hey everyone. How are you guys able to keep root with 5.1? After the update, towelroot didn't stick. Nor could I reinstall it. Supersu doesn't have access either. What do you guys recommend?
You have to re root.
MikeyLee said:
You have to re root.
Click to expand...
Click to collapse
I used towelroot before, but now it says it can't support my device. How did you re-root your device? Did you do it within 5.1? Also, did re-installing TWRP work for you? I lost mine.
This is method I used before. tr.apk
http://forum.xda-developers.com/show...&postcount=376
lowao said:
I used towelroot before, but now it says it can't support my device. How did you re-root your device? Did you do it within 5.1? Also, did re-installing TWRP work for you? I lost mine.
This is method I used before. tr.apk
http://forum.xda-developers.com/show...&postcount=376
Click to expand...
Click to collapse
I think someone said you have to use ADB to flash the new TWRP that is compatible with L on our devices and then flash SuperSU.
I just went back to 2.8.0.0 and it worked for me. Is there a newer version of TWRP?
lowao said:
I just went back to 2.8.0.0 and it worked for me. Is there a newer version of TWRP?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=61577016&postcount=303
It pretty easy to get root and TWRP. Here are the instructions, taken from another thread. (Do you guys even read this stuff?)
Credit to Foltz61.
1. Boot to bootloader.
2. Fastboot boot TWRP-L.img
3. Install supersu-2.49.zip (even though I didn't lose root)
4. Reboot back to system.
5. Reboot back to bootloader.
6. fastboot flash recovery TWRP-L.img.
7. fastboot reboot.
8. Boot to recovery and had TWRP
Thanks, I'll try it tomorrow. It's a bit hard to keep track of like 5 threads and 10 new pages in each thread each day.
Does it matter which SuperSU ZIP version we use? Chainfire website shows 2.46.
ScoobSTi said:
Thanks, I'll try it tomorrow. It's a bit hard to keep track of like 5 threads and 10 new pages in each thread each day.
Does it matter which SuperSU ZIP version we use? Chainfire website shows 2.46.
Click to expand...
Click to collapse
kimtyson said:
3. Install supersu-2.49.zip (even though I didn't lose root)
Click to expand...
Click to collapse
I was wondering the same thing. Could someone provide us with a link to a tested supersu-x.xx.zip so we may have it in one thread.
At this time it would be best to not flash twrp. Instead fastboot boot twrp.img then install beta.SuperSU. 2.49
Sent from my MT2L03 using XDA Free mobile app
Lollipop will check the recovery partition and if it isn't stock it will put it back. In order for TWRP to stick you must boot TWRP after you install to allow it to patch the lollipop rom. TWRP must not be read only or else it cannot install supersu nor patch.
You guys got a lot to learn, but this is good, because now maybe some of you will pick up some experience and grow while here on XDA
---------- Post added at 09:35 PM ---------- Previous post was at 09:33 PM ----------
In addition, do not use TWRP from the official twrp website until Dees_Troy gets around to updating his personal device tree since they do not accomondate for the changes seen in Lollipop. You have been officially warned. Unless you like sweats, tears, and heartaches.
lowao said:
Could someone provide us with a link to a tested supersu-x.xx.zip so we may have it in one thread.
Click to expand...
Click to collapse
Here, https://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip.
kimtyson said:
Here, https://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip.
Click to expand...
Click to collapse
Thanks for the link!
deleted

ZS570KL Android 7.0 OTA Firmware download&install guide(if you unlock)

Here is the ROM
all links should add"" by yourself
For 2.15:https://dlsvr04.asus.com/pub/ASUS/ZenFone/ZS570KL/UL-Z016-WW-5.14.44.1898-user.zip
UL-Z016-WW-5.14.44.1898-user.zip
For 2.40:https://dlsvr04.asus.com/pub/ASUS/ZenFone/ZS570KL/UL-Z016_1-WW-5.14.44.1898-user.zip
UL-Z016_1-WW-5.14.44.1898-user.zip
Both of them are from Chine office website
Install Guide:
1.Download both 6.0 and 7.0 Firmware (for your model)and put them into your SD card
2.flash office recovery
3.Enter recovery and choose "Apply update from SD card" and flash 6.0 first and 7.0 firmware in order
4.Wipe Cache partition (not necessary but advice to do it)
5.Have fun with your android 7.0
there is still no twrp for android 7.0 now,so no root right now but will come soon.(TWRP now is in beta)
2.flash office recovery
where do I find this?
samson1357924 said:
there is still no twrp for android 7.0 now,so no root right now but will come soon.(TWRP now is in beta)
Click to expand...
Click to collapse
I look forward to a twrp for Android 7. I already updated to Android 7 but lost my root and I would like to reinstall/flash magisk through twrp. The lasty twrp versions I tried in Android 6, showed upside down on my phone when I booted twrp, but the touchscreen was at the "regular" spot, so it was very very difficult to navigate. I hope I do not have that problem with the next twrp.
palgo47 said:
2.flash office recovery
where do I find this?
Click to expand...
Click to collapse
Here come the stock recovery from Z016-WW-4.12.40.1698
For 2.15Ghz
https://drive.google.com/file/d/0By3NdBos6w6JQ2ZTWi1pMTdYWE0/view?usp=sharing
For 2.4Ghz
https://drive.google.com/file/d/0By3NdBos6w6JWXZOanJDbmI0akU/view?usp=sharing
this article came from Taiwan Asus office Forum:
https://www.asus.com/zentalk/tw/thread-185884-1-1.html
blahforme said:
I look forward to a twrp for Android 7. I already updated to Android 7 but lost my root and I would like to reinstall/flash magisk through twrp. The lasty twrp versions I tried in Android 6, showed upside down on my phone when I booted twrp, but the touchscreen was at the "regular" spot, so it was very very difficult to navigate. I hope I do not have that problem with the next twrp.
Click to expand...
Click to collapse
Here come the ZS570KL twrp for 7.0(this file came from Taiwan Asus office Forum made by shakalaca)
https://mega.nz/#F!EkFF1CJD!C8o2wXMARW3YJFOipDttbA
Forum link:https://www.asus.com/zentalk/tw/forum.php?mod=viewthread&tid=220546&extra=page=1&page=3&mobile=2
samson1357924 said:
Here come the twrp for 7.0(this file came from Taiwan Asus office Forum made by shakalaca)
https://mega.nz/#F!EkFF1CJD!C8o2wXMARW3YJFOipDttbA
Click to expand...
Click to collapse
Thank you very much. The twrp still loaded upside down, but I was able to carefully navigate it to install magisk v11.1 again to regain my root and be able to use Android Pay once again. Thank you again!
You think by now that the twrp would be back to normal after all these updates. Is there something missing in there, that making it upside down?
blahforme said:
Thank you very much. The twrp still loaded upside down, but I was able to carefully navigate it to install magisk v11.1 again to regain my root and be able to use Android Pay once again. Thank you again!
Click to expand...
Click to collapse
You are welcome~
So glad to help you^^~
samson1357924 said:
Here come the ZS570KL twrp for 7.0(this file came from Taiwan Asus office Forum made by shakalaca)
https://mega.nz/#F!EkFF1CJD!C8o2wXMARW3YJFOipDttbA
Forum link:https://www.asus.com/zentalk/tw/forum.php?mod=viewthread&tid=220546&extra=page=1&page=3&mobile=2
Click to expand...
Click to collapse
Thanks... doesn't reboot anymore on mine and I can interact with the screen... but it is still upside down. Makes it very difficult.
jnmacd said:
Thanks... doesn't reboot on my and I can interact with the screen... but it is still upside down. Makes it very difficult.
Click to expand...
Click to collapse
Ummm......Maybe you are S821 model?The twrp maker seem doesn't have S821 model,so this recovery mightn't work on 6G/256G
samson1357924 said:
Ummm......Maybe you are S821 model?The twrp maker seem doesn't have S821 model,so this recovery mightn't work on 6G/256G
Click to expand...
Click to collapse
I have the non-pro version.. 2.15Ghz
I am using the sd 820 64GB version and twrp shows upside down for me.
jnmacd said:
I have the non-pro version.. 2.15Ghz
Click to expand...
Click to collapse
Well,I didn't have this problem...
But there is a new version release,maybe you should try!
twrp-3.1.0-0-Z016D-20170317-N.img
In the same link!
There is no need for all these complicated steps. My phone(Z016D) was also rooted. I just downloaded the Nougat ROM, copied it over to the root of the internal drive. As soon as you disconnect the phone from PC, you will get a notification "New System Update detected". Click Update and you're good to go. After installation, I would suggest to do a factory reset.
Sent from my ASUS_Z016D using Tapatalk
rynaus said:
There is no need for all these complicated steps. My phone(Z016D) was also rooted. I just downloaded the Nougat ROM, copied it over to the root of the internal drive. As soon as you disconnect the phone from PC, you will get a notification "New System Update detected". Click Update and you're good to go. After installation, I would suggest to do a factory reset.
Sent from my ASUS_Z016D using Tapatalk
Click to expand...
Click to collapse
It's a good news!You mean that you update to 7.0 with twrp?!!!It is awesome!
However I want to know that how did you root?with superSU?system-less superSU?magisk?or another?And did you change your system?like install Exposed,viper4Android,or delete some system app?I think these actions might make you meat some problem when updating.So I think my method might be almost 100% to update success.
Whatever thanks for your advice,and enjoy your root
I think these actions might make you meat some problem when updating.
Click to expand...
Click to collapse
How exactly can they create problems. There reason you can't have OTA updates is unlocked bootloader. That however, shouldn't really prevent you from flashing rom through recovery via SD card or sideload or just dropping it into internal storage and doing what rynaus did.
_Kuroi_ said:
How exactly can they create problems. There reason you can't have OTA updates is unlocked bootloader. That however, shouldn't really prevent you from flashing rom through recovery via SD card or sideload or just dropping it into internal storage and doing what rynaus did.
Click to expand...
Click to collapse
I think that you can try rynaus first.Because it's more easier.If it isn't work ,try what I say.
How exactly can they create problems. →It may cause update fail, usually just can't update success.(from my experience from my ZF5 and ZF2)
samson1357924 said:
Well,I didn't have this problem...
But there is a new version release,maybe you should try!
twrp-3.1.0-0-Z016D-20170317-N.img
In the same link!
Click to expand...
Click to collapse
I can confirm that the twrp-3.1.0-0-Z016D-20170319-N does not show upside down for me. I hope you all have the same result.
https://mega.nz/#F!EkFF1CJD!C8o2wXMARW3YJFOipDttbA
blahforme said:
I can confirm that the twrp-3.1.0-0-Z016D-20170319-N does not show upside down for me. I hope you all have the same result.
https://mega.nz/#F!EkFF1CJD!C8o2wXMARW3YJFOipDttbA
Click to expand...
Click to collapse
Thanks for your reply^^~
0319-N works right for me too.. no longer upside down. Was able to root with Magisk

[Help] Mt2-L03 stuck in boot loop

Hello everyone, let me just go ahead and say that I'm a total noob in the android customization thing but I somehow manage to install Lineage OS on my L03 and at the time I thought it was done and I didn't messed anything up but somehow that backfire on me.
So right now my HAM 2 is on a boot-loop, it kept staying the Lineage OS loading screen and once it was done and show the device setup screen for like 3 seconds it goes black and load again.
I've tried everything to fix it, from reinstalling an older version of Lineage, install CM13, wipe all data cache and dalvik ( and yes I have install gapps everytime I install any custom ROM, and finally after looks around the web I thought It might be the power button that making it acts weird but when after cleans it with rubbing alcohol (70%) It's still happening.
Now I have 2 options, first is to downgrade the firmware ( I'm not sure if it safe and how to do it) and seconds is to downgrade or delete TWRP ( newest version on HAM2).
Please, if anyone knows how to fix this. Help me. I got this device from amazon and it'll be a hassle trying to claim warranty on it since I have unlock it's boot-loader and install a custom ROM.
Thanks in advance.
Im not trying to be an asshole but does no one know how I can fix this?.
Bl4ckAir said:
Im not trying to be an asshole but does no one know how I can fix this?.
Click to expand...
Click to collapse
Are you using MDMower's latest version of TWRP for the Mate 2 (3.1.N0-0) ?
divhandyman said:
Are you using MDMower's latest version of TWRP for the Mate 2 (3.1.N0-0) ?
Click to expand...
Click to collapse
I'm using the offical Teamwin TWRP 3.1.1.0 for mt2l03.
Bl4ckAir said:
I'm using the offical Teamwin TWRP 3.1.1.0 for mt2l03.
Click to expand...
Click to collapse
That one never works for me. Flash this version of TWRP and flash the latest version of Lineage OS 20170903.
https://www.androidfilehost.com/?a=show&w=files&flid=40887
divhandyman said:
That one never works for me. Flash this version of TWRP and flash the latest version of Lineage OS 20170903.
https://www.androidfilehost.com/?a=show&w=files&flid=40887
Click to expand...
Click to collapse
Could you elaborate on how to do that? Can I flash it in the old TWRP or ADB on desktop? Thanks.
Bl4ckAir said:
Could you elaborate on how to do that? Can I flash it in the old TWRP or ADB on desktop? Thanks.
Click to expand...
Click to collapse
Yes use ADB.
https://www.youtube.com/watch?v=OwY-K6-pmJU&feature=youtu.be
Bl4ckAir said:
Please, if anyone knows how to fix this.
Click to expand...
Click to collapse
Well, it seems that you missed all of the fun & games last week in the following thread:
https://forum.xda-developers.com/ascend-mate2/help/candy7-cm13-rom-restarting-loop-issue-t3661885
"divhandyman" gets right to the point by correctly recommending MDMower's repo @ AndroidFileHost. My discussions on the topic are slightly more wordy (we all have our faults, yes?), but MDMower's TWRP & LineageOS 09/03 (or newer) is all that you need because the boot loop fix is baked-in.
As a side note, my original instructions assumed a degree of basic knowledge and did not include guides to installing TWRP, making backups, moving files, using ADB/fastboot, etc... These tools and procedures are well documented, ad nauseam, elsewhere.
hola
have you managed to solve it?
I have the same problem!!!
please help
Douglas_27 said:
have you managed to solve it?
I have the same problem!!!
please help
Click to expand...
Click to collapse
Hi, Douglas I have managed to solved it. Please tell me the step you have taken and I'll maybe able to help you.
Does it work for L01 the latest TWRP
EndlessFall said:
Well, it seems that you missed all of the fun & games last week in the following thread:
https://forum.xda-developers.com/ascend-mate2/help/candy7-cm13-rom-restarting-loop-issue-t3661885
"divhandyman" gets right to the point by correctly recommending MDMower's repo @ AndroidFileHost. My discussions on the topic are slightly more wordy (we all have our faults, yes?), but MDMower's TWRP & LineageOS 09/03 (or newer) is all that you need because the boot loop fix is baked-in.
As a side note, my original instructions assumed a degree of basic knowledge and did not include guides to installing TWRP, making backups, moving files, using ADB/fastboot, etc... These tools and procedures are well documented, ad nauseam, elsewhere.
Click to expand...
Click to collapse
I tried the latest TWRP from MDMower but got stuck in a boot loop after I flashed it and went to turn off the phone to go into recovery mode.
i mistakingly delete a file on my huawei mt2-l02 and since then when i power on it will stuck on startup anyone with solution

Back to Stock Global (from LOS 16 with TWRP) / lock bootloader ?

Hello...
Is it just that simple.- flash the latest official global firmware in twrp, clear cache/dalvik and reboot,- and then i am completely back on stock ?
And after it, i can lock bootloader with the miflash-unlock-tool, if i would ?
(or how to do that?)
Would anyone post a simple step by step guide here ?
Thanks in advance !!!
*push*
Anyone can confirm or correct ?
Take miflash and flash Fastboot Rom with the "delete and lock" Option.
ConradB said:
Take miflash and flash Fastboot Rom with the "delete and lock" Option.
Click to expand...
Click to collapse
And there is nothing to take care about, like told in this xda-story ? :
https://www.xda-developers.com/flash-miui-global-locked-bootloader-xiaomi-brick/
Just start the mi-flash-tool and select the Fastboot-Rom, for example "...Global-9.6.25.0.OEJMIFD-3433a60ef4-8.1...", and start ?
Equal, if the device is rooted with magisk and flashed with unofficial lineageOS ?
BTW.
Where to get/download the newest/correct Mi-Flash-Tool ?
How was your experience with custom ROMs? Any serious bugs??
cha_indian said:
How was your experience with custom ROMs? Any serious bugs??
Click to expand...
Click to collapse
I am on unofficial LOS 16 and it is a daily driver for me. I just want to know the complete correct way to go back to stock / lock the bootloader again, if i sell my phone in the future, like i do with every phone.
CM-Tester said:
And there is nothing to take care about, like told in this xda-story ? :
https://www.xda-developers.com/flash-miui-global-locked-bootloader-xiaomi-brick/
Just start the mi-flash-tool and select the Fastboot-Rom, for example "...Global-9.6.25.0.OEJMIFD-3433a60ef4-8.1...", and start ?
Equal, if the device is rooted with magisk and flashed with unofficial lineageOS ?
BTW.
Where to get/download the newest/correct Mi-Flash-Tool ?
Click to expand...
Click to collapse
Anyone some experience ??
CM-Tester said:
Hello...
Is it just that simple.- flash the latest official global firmware in twrp, clear cache/dalvik and reboot,- and then i am completely back on stock ?
And after it, i can lock bootloader with the miflash-unlock-tool, if i would ?
(or how to do that?)
Would anyone post a simple step by step guide here ?
Thanks in advance !!!
Click to expand...
Click to collapse
Just download the official fastboot ROM and flash via fastboot mode. It'll wipe all your data and start your device a new including locking your bootloader.
MasterFURQAN said:
Just download the official fastboot ROM and flash via fastboot mode. It'll wipe all your data and start your device a new including locking your bootloader.
Click to expand...
Click to collapse
Thanks !
Is it possible too, to flash with TWRP, or just the fastboot-method is possible ?
CM-Tester said:
Thanks !
Is it possible too, to flash with TWRP, or just the fastboot-method is possible ?
Click to expand...
Click to collapse
Fastboot will restore your phone back to factory settings and I guess that's what you want. You can't restore to factory settings in TWRP as it requires unlocked bootloader. Just download the ROM and flash via fastboot
MasterFURQAN said:
Fastboot will restore your phone back to factory settings and I guess that's what you want. You can't restore to factory settings in TWRP as it requires unlocked bootloader. Just download the ROM and flash via fastboot
Click to expand...
Click to collapse
Ok, so if i had downloaded the fastboot-rom 9.6.25.0,- could i flash it with the mi-flash-tool from here too, to do that all (lock bootloader and completely go back to stock):
https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405
As i never did that before... - Is that simple or do i need a little "how-to" guide...
I was searching a bit here on xda, but didn´t found a little guide for that...
CM-Tester said:
Ok, so if i had downloaded the fastboot-rom 9.6.25.0,- could i flash it with the mi-flash-tool from here too, to do that all (lock bootloader and completely go back to stock):
https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405
As i never did that before... - Is that simple or do i need a little "how-to" guide...
I was searching a bit here on xda, but didn´t found a little guide for that...
Click to expand...
Click to collapse
It's quite simple. I did it myself a few days ago. The tool does everything itself. But you should still read the thread if you are new to MIUI like me. But keep in mind the phone will format including the internal storage. I suggest you backup everything.
MasterFURQAN said:
It's quite simple. I did it myself a few days ago. The tool does everything itself. But you should still read the thread if you are new to MIUI like me. But keep in mind the phone will format including the internal storage. I suggest you backup everything.
Click to expand...
Click to collapse
Ok, i think, if i would go back to stock, i would take the tool, if it is that simple (all automatical).
Thanks

[ROOT][TUTORIAL] Root your Motorola One safe

<removed>
I think Moto Moto don't like us
Command should be "dd if=/dev/block/mmcblk0p40 of=/external_sd/boot.img" then, and don't forget to mount micro sd in twrp first.
Ofc it works fine to execute command from adb shell when booted to twrp, which makes it a bit easier to type.
When I try to boot from patched image, phone is stuck on 'Android One' logo.
I'm on firmware version OPENEU_9.0_PPK29.68-16-21. I guess this firmware version isn't rootable .
Well, I'll wait for some custom ROM to enjoy rooted phone (maybe that Ressurection Remix ROM which was announced few days ago) .
gregory678 said:
When I try to boot from patched image, phone is stuck on 'Android One' logo.
I'm on firmware version OPENEU_9.0_PPK29.68-16-21. I guess this firmware version isn't rootable .
Well, I'll wait for some custom ROM to enjoy rooted phone (maybe that Ressurection Remix ROM which was announced few days ago) .
Click to expand...
Click to collapse
Propably you patch wrong boot image, try to extract from your device stock
tys0n said:
Command should be "dd if=/dev/block/mmcblk0p40 of=/external_sd/boot.img" then, and don't forget to mount micro sd in twrp first.
Ofc it works fine to execute command from adb shell when booted to twrp, which makes it a bit easier to type.
Click to expand...
Click to collapse
It's not universal path so i BOLD the path to change
[email protected] said:
It's not universal path so i BOLD the path to change
Click to expand...
Click to collapse
That's understood, but if you're booted to twrp, then "of=/external_sd/boot.img"" is pretty much your only option since internal is encrypted.
tys0n said:
That's understood, but if you're booted to twrp, then "of=/external_sd/boot.img"" is pretty much your only option since internal is encrypted.
Click to expand...
Click to collapse
Edited
[email protected] said:
Propably you patch wrong boot image, try to extract from your device stock
Click to expand...
Click to collapse
That didn't help as well. Now I'm sure that only some custom ROM will be my way to enjoy root. I will not flash any other stock ROM, I'm not that desperate (I'm also a bit afraid of doing so) .
gregory678 said:
That didn't help as well. Now I'm sure that only some custom ROM will be my way to enjoy root. I will not flash any other stock ROM, I'm not that desperate (I'm also a bit afraid of doing so) .
Click to expand...
Click to collapse
Okay, contact me on Telegram @Zmianek, and be a Tester of RessuectionRemix ! I always need to wait till the weekend with tests that slow's down development speed
gregory678 said:
That didn't help as well. Now I'm sure that only some custom ROM will be my way to enjoy root. I will not flash any other stock ROM, I'm not that desperate (I'm also a bit afraid of doing so) .
Click to expand...
Click to collapse
It should work. I've patched boot after every update without problems.
XT1941-4
Sent from my moto one
[email protected] said:
Okay, contact me on Telegram @Zmianek, and be a Tester of RessuectionRemix ! I always need to wait till the weekend with tests that slow's down development speed
Click to expand...
Click to collapse
I would like to, but is there some way of backing up stock ROM? I know that current version of TWRP has some issues with /data partition, that's why I ask .
And what about installing this ROM? Would I need to use that TWRP we have now? Is it safe?
tys0n said:
It should work. I've patched boot after every update without problems.
XT1941-4
Click to expand...
Click to collapse
Well, you have different software channel, I think that's the only reason why it works for you and it doesn't work for me . OPENEU seems to be bulletproof. (I have XT1941-4 too)
Someone correct me if I'm wrong, maybe for someone with OPENEU it does work.
I Request close due to failures

Categories

Resources