I just unlocked my bootloader and I'm on MiUI 10 Global and I have the end goal in flashing Lineage OS. I have ADB and Fastboot seemingly working (they both recognize my device) and I have twrp-3.2.3-0-chiron.img downloaded with USB debugging obviously on. Booting into fastboot via ' adb/ reboot bootloader ' works fine, but I can't seem to flash twrp onto my phone. When I type in the command (fastboot flash recovery twrp-3.2.3-0-chiron.img) i'm stuck there just waiting. I had it sitting there for over 15 minutes with nothing happening.
Any help would be wonderful!
Related
I am having a REAL BUGGER of a time with my Xiaomi Redmi Note 3 Pro (Snapdragon)!
1. It is not recognized by ADB in Fastboot mode.
2. I suspect it shipped wit a vendor ROM, and I'm trying to flash latest Official MIUI Global Dev (Marshmallow) ROM, but I keep getting errors in MI Flash (screenshot attached).
3. I want to Flash TWRP, BUT ADB isn't working, AND I cannot get to the download page for the cracked bootloader.
4. Seriously considering Resurrection Remix ROM, instead, but most of the above issues still apply.
I am NOT new to custom recoveries, flashing ROMS, ADB etc, BUT I am dealing with a new PC (Windows 10 Home, 64 bit, like my old (dead) laptop), and I'm new to this device.
PLEASE HELP. (Quite frustrated)
Fastboot won't recognize adb commands you have to use fastboot.
What you can try is booting into emergency download mode and using my flash to flash it from there. I think it's " adb reboot edl" while the device is on with USB debugging or using the mi updater app ( tap the three dots I think).
I think that this is not the correct section for your question, and i dont know the procedure that you follow but try to follow this procedure:
-Connect the phone at pc with USB cable
-Make sure that debug mode and OEM unlock was abilitate in dev settings
-Copy twrp.img in adb folder
-Shut down the phone and press power botton and - vol buttons for enter in fastboot mode
-Run this commands by terminal open in adb folder
fastboot devices
-If fastboot recognize correctly the device run this command
fastboot fash recovery nameoftwrp.img
-After reboot the device with this command
fastboot reboot
When the phone reboot press immediatily vol + for enter in twrp
Good luck
GOT IT! FINALLY!
-I finally got ADB to connect, and was able to enter EDL through ADB.
-Re-downloaded ROM from web.
-Re-extracted.
-FLASHED SUCCESSFULLY!
-SETUP COMPLETED SUCCESSFULLY!
-YAY!
(I think the original download was corrupted, somehow.)
I tried to much with installing diffent ROMs and now nothing's working anymore.
My poco starts only to fastboot but I can't connect with adb. Any other possibilities?
Drivers are all ok on the PC, because my second poco is normaly recognised.
Thanks for help.
Given unlocked bootloader, If you can only boot to fastboot maybe your recovery was deleted. You probably need to install twrp:
1.get twrp here:
https://forum.xda-developers.com/poco-f1/how-to/recovery-official-twrp-t3883736
2. If fastboot is working then:
https://www.xda-developers.com/how-to-install-twrp/
If you can boot to twrp then flash a custom rom
Note that I'm unsure if above will work, only guessed
Can't flash twrp because in adb mode it shows < waiting for any device >
gartmann said:
Can't flash twrp because in adb mode it shows < waiting for any device >
Click to expand...
Click to collapse
What happens if you type fastboot devices
Hello all,
I am stuck in this problem. Would appreciate any help.
Working in LINUX ubuntu 18.
Got a MI pad 1 with locked bootloader.
flashed TWRP recovery using fastboot. Booted into TWRP successfully.
Flashed the files from this
https://www.techeia.com/2018/10/best-custom-rom-for-mi-pad-1-2018.html
Everything flashed successfully.
Rebooted only to be stuck into MI logo screen. Bootloop probably because of locked bootloader.
Hence, I decided to wipe the bootloader itself
got the hint from here https://forum.xda-developers.com/mi-pad/how-to/fix-fastboot-bootloop-fix-xiaomi-mi-pad-t4008653
but I didn,t wiped recovery. but erased everything else. Then powered off to boot into previously installed TWRP recovery.
From there, I am trying to boot into fastboot or TWRP but the screen is showing blank. I am using the key pattern for fastboot or recovery and trying to detect the device into any mode through ubuntu terminal using
sudo fastboot devices and
adb devices
but its not detecting the device there also. USB debugging was enabled already.
Any clues for how can I boot into fastboot or TWRP from this.
Regards
Hiteshkartik
@hiteshkartik
A device with erased boot-loader never can work: you simly get a black screen. You no longer can communicate with it - neither via ADB nor via Fastboot.
Can I have a way around ?? I mean installing bootloader or somehow booting into fastboot or TWRP directly with any toolkit or terminal.
Hello all,
I am stuck in this problem. Would appreciate any help.
Working in LINUX ubuntu 18.
Got a MI pad 1 with locked bootloader.
flashed TWRP recovery using fastboot. Booted into TWRP successfully.
Flashed the files from this
https://www.techeia.com/2018/10/best...ad-1-2018.html
Everything flashed successfully.
Rebooted only to be stuck into MI logo screen. Bootloop probably because of locked bootloader.
Hence, I decided to wipe the bootloader itself
got the hint from here https://forum.xda-developers.com/mi-...i-pad-t4008653
but I didn,t wiped recovery. but erased everything else. Then powered off to boot into previously installed TWRP recovery.
From there, I am trying to boot into fastboot or TWRP but the screen is showing blank. I am using the key pattern for fastboot or recovery and trying to detect the device into any mode through ubuntu terminal using
sudo fastboot devices and
adb devices
but its not detecting the device there also. USB debugging was enabled already.
Any clues for how can I boot into fastboot or TWRP from this.
Regards
Hiteshkartik
This an exact duplicate of already existing thread
@hiteshkartik
Original thread here:
https://forum.xda-developers.com/android/help/mi-pad-booting-fastboot-twrp-recovery-t4129999
@Logix
Ok so my Xiaomi Mi 8 Lite was (hard??)bricked because I flashed something I shouldn't have so now I can still access recovery mode TWRP but fastboot does not work at all. I've tried flashing lineage but when I boot it back up it just brings me back to TWRP after rebooting again.
By fastboot not working I mean that once I connect the device to a computer, the phone automatically quits fastboot mode. ADB can't even seem to find it in the devices list.
What should I do? Is my phone dead forever?
Thank you!!!