Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restores the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
SUPPORTED DEVICES
- LEX820 (X2_CN)
- LEX821 (X2_WW)
- LEX822 (X2_CN)
- LEX829 (X2_NA)
- LEX910 (MAX_PLUS. Currently only supported on unofficial test builds)
HOW TO INSTALL LINEAGEOS WITH LINEAGE RECOVERY
- Make sure your phone is running firmware from at least 19S for x2 and 13s for max_plus. If not? Please download either the minimum recommended version below (or optional updated versions) and install it via TWRP. It can be flashed before or after the ROM
Please follow the official LineageOS Wiki instructions for our device.
https://wiki.lineageos.org/devices/x2/install
HOW TO INSTALL LINEAGEOS WITH TWRP
- Make sure your phone is running firmware from at least 19S for x2 and 13s for max_plus. If not? Please download either the minimum recommended version below (or optional updated versions) and install it via TWRP. It can be flashed before or after the ROM
- Unlock bootloader and install TWRP 3.3.0-1 (designed for Pie and treble) or higher. TWRP instructions are here.
- Download the LineageOS and firmware zips. (see Downloads)
- Boot into TWRP.
- Copy the downloaded zip files to internal sdcard.
- Perform a backup of your current ROM. (Optional)
- RECOMMENDED: Do a factory reset (clean wipe)! No support if you didn't! (Wipe Dalvik, system, cache and data)
- Flash firmware and LineageOS zips.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot to system.
HOW TO UPDATE LINEAGEOS WHEN ENCRYPTED VIA TWRP
- NOTE! Please avoid doing OTA via Lineage Updater when your device is encrypted because TWRP screws up and causes Google Services Framework to crash like crazy. Only Lineage Recovery properly supports OTA via Lineage Updater.
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Reboot to TWRP.
- Flash LineageOS. (Wiping Dalvik and Cache is optional, but recommended)
- Reboot to system.
MAIN DOWNLOADS
TWRP for x2: Official https://twrp.me/leeco/leecolemax2.html
TWRP for max_plus: Official https://twrp.me/leeco/leecolemaxpro.html
Lineage Recovery:
- Official: https://download.lineageos.org/x2
- Unofficial: https://osdn.net/projects/lineageos-for-x2/releases/p16551
LineageOS:
- Official: https://download.lineageos.org/x2
- Unofficial: https://osdn.net/projects/lineageos-for-x2/releases/
Discontinued unofficial mirrors:
- Unofficial: https://sourceforge.net/projects/lineageos-for-x2/files/16.0 Unofficial Releases/
- Unofficial Google Drive mirror: https://drive.google.com/open?id=1uOrZzcer8SYe-BcYZuaSJTPOehQ68EBc
SU-Addon: (not available yet for LineageOS 16.0)
Migration-Tools: https://androidfilehost.com/?w=files&flid=254680 (Unofficial->Official, Official->Unofficial)
GOOGLE APPS (GAPPS) DOWNLOADS
- MindTheGapps: (RECOMMENDED!)
Official: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
Mirror: https://androidfilehost.com/?w=files&flid=170282
- OpenGapps:
Official:
https://opengapps.org
GOOGLE CAMERA (GCAM) DOWNLOADS
Google Camera: (Recommend Tolyan009 builds as Arnova8G2 builds are not always compatible with Pie x2 ROMs)
celsoazevedo.com/files/android/google-camera/dev-tolyan009/
Current recommended gcam6 build for LineageOS 16.0 on x2
https://f.celsoazevedo.com/file/gcamera/MGC_6.1.021_BSG_Arnova-based_v.1.4a_TlnNeun.apk
If you have pink tint?
More > Settings > "advanced" under Quick Settings section > Fix > Fix old WB gains
If you have green selfie camera?
Set front camera model to Nexus 6P
If that doesn't work?
More > Settings > "advanced" under Quick Settings section > Fix > Fix front camera
Here's also a good gcam config by @Prashant69 that also helps remove the tint issues if the above fixes don't work
https://sourceforge.net/projects/lineageos-for-x2/files/Mods and Tweaks/
Here's how to load configs
https://www.celsoazevedo.com/files/android/google-camera/f/settings09/
MISC DOWNLOADS
ThE_MarD's LineageOS for x2 Sourceforge, directory: (also contains some mods and tweaks) https://sourceforge.net/projects/lineageos-for-x2/
FIRMWARE DOWNLOADS
Minimum required versions:
- LEX820 (X2_CN) 20s
- LEX821 (X2_WW) 19s
- LEX829 (X2_NA) 20s
- LEX910 (MAX_PLUS) 13s
Optional newer versions:
- LEX820 (X2_CN) 30s
- LEX820 (X2_CN) 466D
Link for x2 firmware: https://sourceforge.net/projects/lineageos-for-x2/files/Firmware Updates/
Link for max_plus firmware: https://sourceforge.net/projects/lineageos-for-max-plus/files/firmware/
DEVELOPER RESOURCES
https://github.com/lineage-x2-devs
https://github.com/LineageOsMaxPlus/
https://github.com/lineageos/android_device_leeco_msm8996-common
https://github.com/lineageos/android_device_leeco_x2
https://github.com/lineageos/android_kernel_leeco_msm8996
HOW TO CONTRIBUTE?
Send your patches up for review: https://review.lineageos.org/
Read the guides on the LineageOS Wiki: https://wiki.lineageos.org/
XDA:DevDB Information
[OFFICIAL][X82X][9.x][TREBLE] LineageOS 16.0 (pie) for LeEco Le Max 2, ROM for the LeEco Le Max 2
Contributors
ThE_MarD, codeworkx, mosimchah,moto999999,1nfrag,shivatejapeddi,KuranKaname,GalaticStryder,andr68rus,Tortel1210,visionary
Source Code: https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: x821 19s. X820 and x829 20s. x910 13s. Higher is optional.
Based On: AOSP
Version Information
Status: Nightly
Created 2018-10-05
Last Updated 2020-01-12
Frequently Asked Questions
I've been asked to provide logcat, how do I do that?
You can either root and use an app like MatLog, or if boot logcat is required? You will need adb logcat from a PC. Here's a simple guide from the LineageOS Wiki https://wiki.lineageos.org/logcat.html
My lockscreen crashes after reboot, what should I do to fix it?
https://forum.xda-developers.com/le-max-2/how-to/guide-to-fixing-x2-lockscreen-crash-t3918911
I don't see an option for call recording, what's going on?
Only the stock dialer app supports it. If you install a Gapps package that overwrites the stock dialer app? It won't have call recording as well. Only the included dialer app of LineageOS is compatible to call recording since it needs to be a ROM implementation and I haven't seen a Play store app that adds support for custom ROM call recording. Please also note that call recording is blocked for countries and carriers that have laws against any form of call recording.
What is Power-off Alarm?
This feature allows you to set an alarm clock with the stock clock app included with LineageOS and then turn off the phone, and it will boot up a minute before the designated alarm time and then properly alarm. It works with the device either powered off and also offline charging.
Using a clock app from OpenGapps Stock or from the Play store is not compatible to custom ROM implementations of power-off alarm... So consider this your heads up if you didn't know that already... As I am not responsible for anyone being late for their wedding/work/school/vacation if you tried a non-stock clock app with your LeEco msm8996 device powered off. :silly:
What apps are recommended with the Open Source ConsumerIR?
(WIP! I try to include it only on unofficial builds until selinux neverallow policy compatibility is fixed... Which tbh is beyond my current skill)
Zaza Remote and Mi Remote work great. Smart Remote for Sharp TV also works. I'd recommend avoiding Peel Universal Smart Remote as it hijacks the lockscreen with ads...
Pls sir, I can't connect to my network or IMS/VoLTE doesn't work! What can I try?
Please look below at the "APNS Update from Google" section and try that. I can't offer much else for help sorry as I have zero experience with IMS/VoLTE as Canada blacklists BYOD from that feature... Otherwise if you need extra help? Hopefully someone else in the x2 community can give you advice.
What is the difference between the official LineageOS builds and unofficial?
Unofficial test builds are builds I put out to test changes before I push them to the Official builds... So please stick with Official builds if you want to play it safe... But if you wish to help test and provide feedback on changes before they go official? Unofficial test builds are the best way to do so.
Where is the QuickCharge toggle?
Settings > System > Advanced > LeEco Settings
The rear facing camera won't focus, what should I try?
Please go into Settings > System > Advanced > LeEco Settings, and then enable the focus fix. You may need to restart any open camera app or potentially reboot the system in order for the focus fix values to work.... If that doesn't resolve it? Please try EUI ROM... If it still won't focus? I'm sorry, but your hardware camera actuator is defective and you either need to try the Le Max 2 rear camera magnet trick (please Google it) or replace the rear camera hardware.
Why is our widevine level only L3?
Unfortunately Widevine L1 failed to work correctly on X2 and zl1/0... It would report we have L1 hardware support but vp9.secure and avc.secure codecs were failing to render, thus apps that used L1 like Amazon Prime would error out and revert to L3 and worst case scenario apps like Vudu would crash.
I haven't seen any fixes for those codec issues, so I gave up on it as L3 works fine.
Also, Netflix HD will never work on LeEco devices as they never got them "Netflix certified" which sounds like a money-grab move since L1 is all they should need. For example, Asus Zenfone 5z is L1 certified but not "Netflix certified" just like us and they don't get the option to stream in HD.
This explains it a lot better
https://androidpcreview.com/netflix-hd-android-tv-box/
My device doesn't show any apps in the Play Store what should I do?
https://lineageos.org/Google-Play-Certification/
exfat does not work on LineageOS, what is up with that?
LeEco Le Max 2 does not ship with exfat licensing so we are not allowed to incorporate it in LineageOS Le Max 2 builds. This was tested by both CrisBalGreece and I. If by chance there is an OFFICIAL EUI ROM build that includes exfat? Please let me know so I can test it as well... Here is the LineageOS device charter requirements on exfat
https://github.com/LineageOS/charter/blob/master/device-support-requirements.md#exfat-support
KNOWN BUGS for x2 and max_plus
Updating using the built in LineageOS updater when encrypted causes Google Play Services to crash repeatedly (updating works fine if you have Lineage Recovery installed though. Manually installing newer builds of LineageOS via TWRP also works.)
Microphone and button on 3.5mm headsets using the 3.5mm to Type-C adaptor only works with reversed orientation (IE, official LeEco adaptor with the logo facing downwards)
Dual-role USB does not work (our Type-C port can't detect if it should offer the option to host data transfer, charge the other device, or charge while using Aux out).
Taking a photo during 4K UHD video recording produces a photo with green static instead of a photo. This bug only happens in Snap camera... Google Camera Mod and Open Camera (with Camera API v2 enabled) produces pictures without issue.
Screen on Time is usually only around four to five hours (VERY hard to diagnose battery drain issues... Any logcat with references to battery drain or kernel wakelocks will help resolve this)
CDLA cell calling has crackling/popping sounds
Infinity focus not working (for panoramas, AR and some QR code scanners. Infinity focus also doesn't work in EUI ROM hmm... oddly enough some imx230_lg modules infinity focus can work if you dont need focus fix... so I blame LeEco for the messed up camera haxxs they did since s2 and zl1 have the same issues.)
KNOWN BUGS for max_plus
ES9018 Hi-Fi Audio DAC for 3.5mm headsets to Type-C adaptors does not work (this is the bug that is preventing official unified builds of LineageOS of x2 and max_plus...)
Fingerprint does not work when device is asleep (this is due to the ancient device firmware on max_plus being officially stuck on 13s... there is a pseudo 466d modem firmware fix attempt I made but have not received feedback on yet)
Boot animation does not work (this is due to a fix for screen tearing... maybe one day I'll figure out a fix for boot animation to work with the screen tearing fix)
When launching a camera app, viewfinder goes green for a second and then works normally
After using USB port with Type-C headset or OTG with a flash drive, the device cannot charge until a reboot is performed (known bug even on EUI ROM)
APNs Update from Google
Latest update: 05-06-2019 (May 6, 2019)
This is an optional update if the current APN settings from LineageOS might not be up to date for your carrier and you need newer ones. This is the official APNs list from Google.
After flashing it? Please reboot to system and then go into Settings > Network & Internet > Mobile Internet > Advanced > Access Point Names > "..." menu button > reset to default.
https://sourceforge.net/projects/lineageos-for-x2/files/Mods and Tweaks/APNs Update from Google/
The official Google source git for this file can be found here:
https://android.googlesource.com/device/sample/+/refs/heads/master/etc/apns-full-conf.xml
Please note! This APNs list WILL get overwritten by the ROM on any ROM update and will need to be reinstalled.
Special Thanks
@codeworkx for his major contributions to the LeEco msm8996-common code and kernel and the awesome open source camera HAL
@mosimchah for his contributions to the LeEco msm8996-common code and kernel
@moto999999 for helping the x2 get LAOS 15.1 working. When others left LAOS he helped get the momentum started again.
@infrag for his contributions to x2 such as the multiple audio fixes, LEDs and sorting out the open source camera HAL blobs and assisting with QS Torch
@shivatejapeddi for his contributions to x2 such as finding the fix for QS Torch and the regularly requested VoLTE support XD
@KuranKaname for his contributions to x2 such as helping get Dalvik VM and HWUI sorted out when 14.1 settings didn't work on 15.1, plus his never-ending mission to finding the most optimized code.
@Tortel1210 for his contributions to x2 and helping out with gerrit.
@andr68rus for everything he has contributed to x2. He may have moved to the Xiaomi Mi Mix 2 (sexy device!) but will be fondly remembered for everything he did for the x2 to make Nougat great. We will finish what you started.
@GalaticStryder for his fix for truly display panel that is better than my fix and his other awesome kernel improvements.
[MENTION]ViSi0Naryy[/MENTION] for his contributions to LeEco msm9996-common with testing and contributions with Gerrit
@jabashque for helping fine-tune performance for LeEco msm8996-common devices! LeEco has never been so smooth!
@Lucchetto00 for converting Tortel's devicesettings into LeEco settings and adding QC toggle, plus his method of detecting if a setting exists and whether to display it or not.
cristiansilaghi (no idea if he has XDA as he communicates with me on Telegram) for helping diagnose the battery percentage issues and finding some extra commits to help make it as accurate as possible and an selinux fix for offline charging animation.
...and finally the community. This is for the community, by the community. Give yourselves a pat on the back.
If I missed anyone? Please let me know and I can add them.
Donations
@popeye13 for helping cover my replacement motherboard costs
@Bollex for also helping cover my replacement motherboard costs
@kurtn for also also helping cover my replacement motherboard costs
@xlcashlx for also also also helping cover my replacement motherboard costs
@rberg (Robin Vd Berg since I'm unsure on username) for also also also also helping cover my replacement motherboard costs
(If I got your XDA forum usernames wrong please let me know)
Please donate to anyone mentioned above. Note that I do NOT accept donations (only exception to that was to help cover my replacement motherboard costs). I do alright with my full-time job and am financially stable for my family and I do this as a hobby, and receiving donations for my hobby would feel like I'm pressured to deliver more than I can with my limited spare time.
ThE_MarD said:
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restores the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
SUPPORTED DEVICES
- LEX820 (X2_CN)
- LEX821 (X2_WW)
- LEX822 (X2_CN)
- LEX829 (X2_NA)
HOW TO INSTALL LINEAGEOS
- Make sure your phone is running firmware from at least 19S. If not? Please download either the minimum recommended version below (or optional updated versions) and install it via TWRP. It can be flashed before or after the ROM
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP 3.2.3 (designed for Pie and treble) or higher.
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- RECOMMENDED: Do a factory reset! No support if you didn't!
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot
HOW TO UPDATE LINEAGEOS
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Reboot
DOWNLOADS
TWRP' (Official is not updated yet for Pie) Test builds: http://build.twrp.me/twrp-3.2.3-0-x2.img | https://androidfilehost.com/?w=files&flid=241113&sort_by=date&sort_dir=DESC (Google Drive Mirror: https://drive.google.com/open?id=1Fa-icWihAwcF0dzkbuSU3p5IKig9b6H_)
Lineage 16.0: (Unofficial: https://www.androidfilehost.com/?w=files&flid=283371&sort_by=date&sort_dir=DESC Unofficial Google Drive mirror: https://drive.google.com/open?id=1uOrZzcer8SYe-BcYZuaSJTPOehQ68EBc)
SU-Addon: (not available yet for LineageOS 16.0)
Google Apps: MindTheGapps is currently unavailable for 9.0... so, for now, OpenGapps is the default solution.
OpenGapps (ARM64 Pico or Micro recommended. Mini and higher can cause issues as OpenGapps 9.0 is beta quality for the moment) http://opengapps.org/
Google Camera: (Recommend Tolyan009 builds as Arnova8G2 builds are not always compatible with Pie x2 ROMs) https://www.celsoazevedo.com/files/android/google-camera/
Focus fix: (LineageOS 16.0 will incorporate the build.prop method to toggle focus fix. Just need to flash the appropriate TWRP zip file to toggle it) https://www.androidfilehost.com/?w=files&flid=283410
FIRMWARE DOWNLOADS
Minimum required versions:
- LEX820 (X2_CN) 20s
- LEX821 (X2_WW) 19s
- LEX829 (X2_NA) 20s
https://www.androidfilehost.com/?w=files&flid=261087
Optional newer versions:
- LEX820 (X2_CN) 30s
https://www.androidfilehost.com/?fid=674106145207490413
- LEX820 (X2_CN) 466D
https://mega.nz/#!JUkH3IhI!QUZnqVAzf1Zy6dZnjMSPHll93FZgeBqy15Zi9-5vC54
DEVELOPER RESOURCES
https://github.com/LineageOS/android_device_leeco_msm8996-common
https://github.com/LineageOS/android_device_leeco_x2
https://github.com/LineageOS/android_kernel_leeco_msm8996
HOW TO CONTRIBUTE?
Send your patches up for review: https://review.lineageos.org/
XDA:DevDB Information
[X82X][9.x][TREBLE] LineageOS 16.0 (pie) for LeEco Le Max 2, ROM for the LeEco Le Max 2
Contributors
ThE_MarD, codeworkx, mosimchah,moto999999,1nfrag,shivatejapeddi,KuranKaname,GalaticStryder,andr68rus,Tortel1210,visionary
Source Code:https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: x821 19s. X820 and x829 20s. Higher is optional.
Based On: AOSP
Version Information
Status: Beta
Created 2018-10-06
Last Updated 2018-10-05
Click to expand...
Click to collapse
Thanks. Every body wait this work
mrcesarmx said:
Thanks. Every body wait this work
Click to expand...
Click to collapse
Thanks dude, it was a much awaited built, currently downloading
Heyyo, so for the lineage-16.0-20181005-UNOFFICIAL-x2 build? Noteworthy changes:
Kernel is rebased on CAF Pie and has reworked Quick Charge code (no more QC bugs) and audio (no more Type-C to 3.5mm headphones orientation bug) from @GalaticStryder and his awesome kernel (we don't have a lot of optimizations on top as we are keeping our kernel as simple as possible, so if you want a fine-tuned kernel? I'd recommend checking out GS's thread)
Audio is kanged from gemini (Xiaomi Mi5) and brings with it a lot of changes which should improve audio quality a little
Autofocus fix will now be a build.prop implementation. Just need to use the focus fix zips in TWRP for an automatic method, or edit /vendor/build.prop and change/add persist.camera.focus_fix=1 (this change will hopefully be coming to 15.1 as well as I cherry-picked it for Oreo as well)
msm_irqbalance to help with the smoothness of the ROM (Google recommends it and even uses it on the Pixel as noted in their
Identifying Jitter-Related Jank article.
thermal-engine config from pure marlin (we have had too many complaints about heat, so we will be dropping from the current thermal-engine.conf which allowed the CPU to go up to 79°c at around 75% CPU clock speeds, but now with pure marlin it will cap out around 72°c at 50% clock speeds)
CNE, DPM and GPS are rebased on pie blobs (unfortunately, IMS, RIL and QMI are not as we haven't found a pie device with CAP pie blobs that have a compatible modem x12 device stack for us... we may be stuck waiting on OnePlus3 or Mi5 or Zuk2 because Google reworked how IMS/VoLTE works on Pie and that is causing issues for us...)
ThE_MarD said:
Heyyo, so for the lineage-16.0-20181005-UNOFFICIAL-x2 build? Noteworthy changes:
Kernel is rebased on CAF Pie and has reworked Quick Charge code (no more QC bugs) and audio (no more Type-C to 3.5mm headphones orientation bug) from @GalaticStryder and his awesome kernel (we don't have a lot of optimizations on top as we are keeping our kernel as simple as possible, so if you want a fine-tuned kernel? I'd recommend checking out GS's thread)
Audio is kanged from gemini (Xiaomi Mi5) and brings with it a lot of changes which should improve audio quality a little
Autofocus fix will now be a build.prop implementation. Just need to use the focus fix zips in TWRP for an automatic method, or edit /vendor/build.prop and change/add persist.camera.focus_fix=1 (this change will hopefully be coming to 15.1 as well as I cherry-picked it for Oreo as well)
msm_irqbalance to help with the smoothness of the ROM (Google recommends it and even uses it on the Pixel as noted in their
Identifying Jitter-Related Jank article.
thermal-engine config from pure marlin (we have had too many complaints about heat, so we will be dropping from the current thermal-engine.conf which allowed the CPU to go up to 79°c at around 75% CPU clock speeds, but now with pure marlin it will cap out around 72°c at 50% clock speeds)
CNE, DPM and GPS are rebased on pie blobs (unfortunately, IMS, RIL and QMI are not as we haven't found a pie device with CAP pie blobs that have a compatible modem x12 device stack for us... we may be stuck waiting on OnePlus3 or Mi5 or Zuk2 because Google reworked how IMS/VoLTE works on Pie and that is causing issues for us...)
Click to expand...
Click to collapse
Thanks for developed it.
Testing rom now. Ok for daily driver so far. High cpu usage apps may cause heat though so can just avoid using those for now. Thanks for all your hard work!
There isn't mirroring to TV listed in the known bugs. Is it working in this ROM ?
Thanks.
Great
Awesome, can't wait to try it! Thanks to Marc and everyone who worked on it and even more so for providing details on what and how has been done, much appreciated!
Network traffic monitor, clock position and showing am/pm do not work.
Guys please don't complain about rom sided features because many of them don't work. Mention only the device sided bigs for now.
The VoLTE fix worked on first install.
After reboot I don't get the message to select preferred sim as I did on the first install, and VoLTE isn't working. Is there a way to trigger this manually? I tried playing around with the apns and had no luck.
EDIT:
Manually editing /data/system/users/0/settings_global.xml as per gerrit fixes VoLTE, but system behaves poorly. Mine was value=2 so SED wasn't working.
Will this cover both possibilities?
Code:
if [ -f /data/system/users/0/settings_global.xml ]; then
sed -i 's/"multi_sim_data_call" value="1"/"multi_sim_data_call" value="-1"/g' /data/system/users/0/settings_global.xml
sed -i 's/"multi_sim_data_call" value="2"/"multi_sim_data_call" value="-1"/g' /data/system/users/0/settings_global.xml
restorecon /data/system/users/0/settings_global.xml
fi
mrcesarmx said:
Thanks. Every body wait this work
Click to expand...
Click to collapse
Thanks for quoting the complete OP. Loved scrolling through that again :good:
Hi, after flashing this rom I can't restore any other, older, backup. I tried with many differents backups (lineage, arrowos, revengeos) but I didn't succeded, and after restoring the backup, the phone goes on bootloop.
I have installed the new, unofficial, twrp, but the problem was already present before.
Someone have some idea of what could be the cause?
thanks
kenciroz said:
Hi, after flashing this rom I can't restore any other, older, backup. I tried with many differents backups (lineage, arrowos, revengeos) but I didn't succeded, and after restoring the backup, the phone goes on bootloop.
I have installed the new, unofficial, twrp, but the problem was already present before.
Someone have some idea of what could be the cause?
thanks
Click to expand...
Click to collapse
you have to use no treble recovery 3.2..1 format everything eccept internal storage, and restore the backup, should work...of course if the backup it's not treble..
I just solved the problem. The backup that I wanted to restore was a trebleized one. So I restored the backup, than I re-trebleized the partitions from twrp, wiped cache and delvik and reflashed the rom.
Before returning to lineage os I want to recover some important data from my previous backup
Anyway thank you.. ciao guagliò
Another great job.
sssyraj said:
There isn't mirroring to TV listed in the known bugs. Is it working in this ROM ?
Thanks.
Click to expand...
Click to collapse
Heyyo, tbh I haven't tested it so it is unknown if it works or not... I can't test it as I have a "dumb" TV so.... if anyone wants to test and report? That would be nice heh.
xlcashlx said:
The VoLTE fix worked on first install.
After reboot I don't get the message to select preferred sim as I did on the first install, and VoLTE isn't working. Is there a way to trigger this manually? I tried playing around with the apns and had no luck.
EDIT:
Manually editing /data/system/users/0/settings_global.xml as per gerrit fixes VoLTE, but system behaves poorly. Mine was value=2 so SED wasn't working.
Will this cover both possibilities?
Code:
if [ -f /data/system/users/0/settings_global.xml ]; then
sed -i 's/"multi_sim_data_call" value="1"/"multi_sim_data_call" value="-1"/g' /data/system/users/0/settings_global.xml
sed -i 's/"multi_sim_data_call" value="2"/"multi_sim_data_call" value="-1"/g' /data/system/users/0/settings_global.xml
restorecon /data/system/users/0/settings_global.xml
fi
Click to expand...
Click to collapse
I got the script overhauled after you mentioned it, thanks! Meow the script will look if it's not set properly to -1 and will replace the value no matter what it is :good:
[9.0.0_r50/v121] download : https://androidfilehost.com/?a=show&w=files&flid=286761"Regular" #phhusson AOSP 9.0 vanilla build with microG patches, #ale5000 implementation and multiple foss apps:
(/system partition requires: [arm64:>1.6Gb] [arm32:>1Gb] minimum)
microG: GmsCore19.9.99.mapbox*² GoogleServicesFramework* DroidGuard*
addons: NominatimGeocoderBackend DejaVuBackend IchnaeaNlpBackend LocalWifiNlpBackend openbmapRadiocellsOrg LocalGsmNlpBackend
hot-built: emailExchange2 snapMusic Terminal screenRecorder testDevCamera browserQuarks
prebuilt: Fdroid F-DroidPrivilegedExtension ZxingClient kDI
system/bin* : aapt32 curl32 grep64(pcre2grep version 10.22 2016-07-29)
Also included are these non-foss 3 Google : Playstore, Calendar/Contact_Sync; they can be fully disabled, if not needed, via Settings/Apps, and re-activated back (with or without previous valid Google account registration) . To match Magisk ctsProfile:true (Playstore certified) check https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228 to restore vendor original build.fingerprintwip
Click to expand...
Click to collapse
not included: Latest compatible Google Maps 9.84.2 optional https://androidfilehost.com/?fid=11410963190603886579
Nota : android Webview v76 (spoofing an Oreo 74/SamsungS9) is signed & upgradable from Bromite, Terminal is activated via Settings/System/Advanced/DeveloperOptions and Playstore has to be ForceStop-ed once after registration/wizard, and relaunch. F-Droid V.102.3 auto-update needs FDroid/Settings/ExpertMode/Privileged disabled.
After first rom flash and MicroG prim-initialization, for immediate working location, toggle /Settings /Security&Location /Location off&on. Switching between vtm & mapbox can need wipe for apk cache & account re-creation.
*) home-built with targetSDK 28 and manifest/multiArch
*²) GmsCore is anticipated to v19.9.99(PlayServices variants): can be upgraded with all attached gmscore__.apk
All other included prebuilts are fdroid signed editions.
donations: Consider prim-origin @phhusson @MaR-V-iN @csagan5(Bromite)
others : @ale5000 @Setialpha #ThibG(DroidGuard)
+info for microG implementation https://forum.xda-developers.com/android/development/microg-unofficial-installer-t3432360
If you need more, please let me know about it, but for more "Google": just switch to phhusson "gapps" flavour...
Bugs reporting
ufOfficial rom includes static & passive app kDI (KalturaDeviceInfo) to list all your device specs (treble, widevine...) in a json, and can help you with GSFid or others info(s). This app doesn't connect to internet, and the json (~Android/data/com.oF2pks.kalturadeviceinfo/files/) should not include any private data or ids; it's up to you to share or not.
If you encounter major AOSP "hardware (not software)" related bugs, please switch to #phhusson vanilla v___ edition and help him with proper focused hardware logs. For Camera2 missing features, take time to check OpenCamera first, aosp DevCamera "sample stub" is included for testing purpose : autofocus... ; full cam specs are also in KalturaDeviceInfo (per each "physical" cam).
Click to expand...
Click to collapse
(Specific Sony yoshino overlay & props are added: only available for Sony xz1/G8341-2 & xz1c/G8441 devices)
For Treble when rooted, you can do some tests modifying specifically : /system/bin/rw-system.sh to change some features on post-fs https://github.com/phhusson/device_phh_treble/blob/android-9.0/vndk.rc#L1
hot-built links :
Code:
[SIZE="1"]https://source.codeaurora.org/external/gigabyte/platform/packages/apps/Exchange -b LA.UM.7.6.r1-03700-89xx.0
https://source.codeaurora.org/quic/la/platform/packages/apps/SnapdragonMusic -b android_ui.lnx.3.0.r11-rel
https://github.com/LineageOS/android_packages_apps_Recorder -b lineage-16.0
https://gitlab.com/oF2pks/jelly -b jQuarksMore
https://github.com/LineageOS/android_external_chromium-webview/tree/lineage-15.1
https://github.com/LineageOS/android_packages_apps_Terminal
[/SIZE]
- Bromite latest webView v76 with ad-blocking, upgradable via F-Droid repo https://fdroid.bromite.org/fdroid/repo (Bromite 76 returns a 74/SamsungS9 webclient https://github.com/bromite/bromite/issues/156#issuecomment-445449741: Mozilla/5.0 [Linux; Android 8.0.0; SM-G960F] AppleWebKit/537.36 [KHTML, like Gecko] Chrome/74.0.3729.157 Mobile Safari/537.36); if v76 seems too selective, upgrade to latest Bromite without ad-blocking (v78)
- Optimized browser Quarks ( offline reading mht , print/pdf , share/clipboard target ...) https://gitlab.com/oF2pks/jelly/commits/jQuarksMore package is renamed org.lineageos.jelly for better LineageOS upstream.
Can it boot by mokee kernel for a snapdragon 835?
umidigi a1 pro camera crash.... (open camera, footej, beacon camera)
A very well written OP.
Great job
Tested and functional on S9
Most thing fully functional. Cant get MTP to connect tho.
NisseGurra said:
Tested and functional on S9
Most thing fully functional. Cant get MTP to connect tho.
Click to expand...
Click to collapse
Can you please check GCam is working or not?
oF2pks said:
[9.0.0_r21/v108] download : https://androidfilehost.com/?a=show&w=files&flid=286761
"Regular" #phhusson AOSP 9.0 vanilla build with microG patches, #ale5000 implementation and multiple foss apps: .
microG: GmsCore15.9.99** GoogleServicesFramework
addons: DroidGuard* DejaVuBackend NominatimGeocoderBackend IchnaeaNlpBackend
hot-built: emailExchange2 snapMusic Terminal screenRecorder testDevCamera browserQuarks
prebuilt: Fdroid ZxingClient NightshadelabsAnotherbrowser** kalturadeviceinfos**
system/bin** : aapt32 curl32 grep64(pcre2grep version 10.22 2016-07-29)
Any chance you would be interested in building arm64 a/b ?
Sent from my mata using XDA Labs
Click to expand...
Click to collapse
swiftbones74 said:
Any chance you would be interested in building arm64 a/b ?
Click to expand...
Click to collapse
See the link, already there...
Thanks for doing that, I know that's something that's been missing for some time.
Do you think you'll maintain it "long"-term? (you're using it for yourself?)
Are you releasing by hand, or do you have scripts to automate releases?
It would be nice to also have arm a-only variant, since usually those are cheaper devices, with a lot less RAM, which would be much more happier without Google apps.
Missing complementary old MapsAPIv1 will be added in next release (framework/com.google.android.maps.jar) + specific attached wallpaper
phhusson said:
"long"-term? (you're using it for yourself?)
Are you releasing by hand, or do you have scripts to automate releases?
Click to expand...
Click to collapse
Yes, I will try to follow your releases versioning so user's reports will be synced (build: I've added an inherit ufo.mk -> vendor/ufo, to your generated treble_arm64_*vN.mk)
For arm32 low cost device release, are you referring to treble_arm_avN(vndk-binder32) or treble_a64_avN(vndk32) ?
EDIT2: @phhusson , both arm32_aonly uploaded here :
https://androidfilehost.com/?w=files&flid=287186
com.google.android.maps.jar & LosTerminal are now included
btw, I choose to deodex embedded webwiew (Los v69), but was not able to build a stable complete deodexed aosp (#WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY := true), any hint ?
For info, I use your embedded prebuilt Phonesky(gapps-go) to initiate Playstore account; already paid apps are ok, but with microG/Magisk 17.3 (sony xz1), I fail on CTSprofile match.
EDIT Playstore NOT certified (PlayProtect...) despite GSFid registration
Since some don't have twrp, I'm also looking for a simple "bridge" to patch etc/hosts from within Settings/.../DevOptions, do you believe it could break Treble securities & bootloop : https://github.com/AICP/packages_ap...ndroid/settings/aicp/hfm/HfmHelpers.java#L108 ?
1000Thx again for your heavy works.
Any Screenshot?
Newest version works great !!! Play store works (once enable all the MicroG settings). Waze works for GPS (Google Maps would not work for my Moto G6 XT1925-6).
I tested latest version...a good work but it would much better if there are no apps preinstalled, like here:
https://lineage.microg.org/
Just installed latest arm32_binder64 version on j6 (j600fn to be more exactly) booted fine but without RIL, stock camera crashed at launch.
Shobit Joura said:
This is for a only , I am having a device with a/b partition...
Click to expand...
Click to collapse
you should find it in arm64_abSEAMLESS
Lecterr said:
... it would much better if there are no apps preinstalled, like here:https://lineage.microg.org/
Click to expand...
Click to collapse
Can you elaborate ? Not all users have twrp on their device, so they need all @ale5000 prebuilts in/system + Playstore + Contact/Calendar_GoogleSync;
-classic "old" fdroid 0.102.3 in /system helps users decide to upgrade to any "modern" version with option to downgrade back,
-NightshadelabsAnotherbrowser is tiniest existing apk : browser switcher.
-(hotbuilts are not preinstalled...)
-most of all users forgot barcode/QRcode and miss it when they need it, also it useful to test camera (same as devCamera... and ZxingClient best you can find).
Finally KalturaDeviceInfo (I'm also the dev) is embedded because, conversely to Lineage, aosp don't include any dynamic reporting, and should helps users ( @conanedogawa1011 , @SkyWorldWide ) to overview their device & report: my next release will include fdroid signed edition.
(will also probably use MicroG gmscore semi-official @Setialpha ' release & repo)
All these "preinstalled" floss can be disabled via settings: your next ota will keep them disabled automatically.
lzimbrea said:
Just installed latest arm32_binder64 version on j6 (j600fn to be more exactly) booted fine but without RIL, stock camera crashed at launch.
Click to expand...
Click to collapse
DevCamera & KalturaDeviceInfo can help you understanding the behavior: check latest(rc6) for "#CAMERA2API="in json for more details, and find appropriate focused log (clean all recent apps+ launch adb shell logcat + launch camera...)for Phhusson (hardware bug)
I been on this rom for few weeks now, very stable.
0,4% / h idle drain with 2 sims. Getting 6-7 h screen on
No bugs at all. Good work!
Device: S9
maybe on update more optimization for more battery life
hello, thank you!
is there a separate patched microG package which can be installed in TWRP over vanilla-nosu AOSP?
@eremitein
https://forum.xda-developers.com/android/apps-games/app-microg-gmscore-floss-play-services-t3217616
As I said several times, if someone starts to build the current version of the lineage that I do, I completely close the project.
In May, I closed the port, based on 10 android and now the time to completely close all work on exynos7870. There was only one reason why I didn't do it earlier - I promised to fix the sound during calls in the LTE version. Now all done, I dont have any desire and motivation to do anything for the exynos7870.
This decision is final, I switched now to the work on note pro 12.2 wifi variant, my smart home and think about starting tab s6.
Thanks to everyone who has been with me all these years, I will see you on other projects.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup.
Instructions
1. Install latest TWRP
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
almost all
Known Issues
Lineage Builds
SM-T580
15. 20200815: august security patch: https://drive.google.com/file/d/1m67wMYmMbQOCoNLxalgJ9Pv6T7ruQ2G6/view?usp=sharing
14. 20200630: june security patch, review device tree, switch to samsung stock sound: https://drive.google.com/file/d/1xgvXjydnklYZeVHz6Mumgf7jUAm6oSEz/view?usp=sharing
13. 20200412: april security patch: https://drive.google.com/file/d/1Isqa8WAlghmCGTMSGnKEsfUX9dUicM0n/view?usp=sharing
12. 20200211: latest sources, February security patch: https://drive.google.com/file/d/1jY2riYpLUJ8EFtOMFSXo9o57_Ijr-qVm/view?usp=sharing
11. 20200113: latest sources, January security patch: https://drive.google.com/file/d/1hnEUDgcugxBLbhQw5d-q9mU75rierlZX/view?usp=sharing
10. 20191202: rollback video driver to r22, merge kernel up to 3.18.140 (thanks @followmsi), aptx driver (thanks @followmsi): https://drive.google.com/file/d/1K_K6yfJHmjCNJSR12eAh46-7FhagcT4Z/view?usp=sharing
9. 20191116: november security update: https://drive.google.com/file/d/1CcX6FnTon8OxM99qbUad9NW6rPrJbUgw/view?usp=sharing
8. 20191114: beta version: update video driver up to r28, update omx codecs, latest updates from @followmsi: https://drive.google.com/file/d/18axNa2sq6ekZeADBzTZeXlOOaJ1dg8WN/view?usp=sharing
7. 20191028: disable Codec2.0 components (long delay on start youtube) (thanks @followmsi), fix vulkan libs (thanks @followmsi): https://drive.google.com/file/d/1mAAEstZz9sOSCFWZiujaGKv-kkslIEwV/view?usp=sharing
6. 20191013: audio from sources: https://drive.google.com/file/d/1R6JDLG-H8bP6eGvex7R2PTYsCbrfQpdu/view?usp=sharing
5. 20191007: fix sensors: https://drive.google.com/file/d/1XsQ5qlP22XBGFQK6o1zKT0GLbVd_WlC7/view?usp=sharing
4. 20191003: https://drive.google.com/file/d/1LpthwW1Lf4fJW0nGwsThnJcZ8ToTKpUf/view?usp=sharing
3. 20190929: improved stability: https://drive.google.com/file/d/1qfKSQhDOI4LkthCpOckJLew0zIAZHo67/view?usp=sharing
2. 20190928: fix charger, home button: https://drive.google.com/file/d/1HBaqEwLux9XjTVgHT3IGMXnrCuJaqgTw/view?usp=sharing
1. 20190926: https://drive.google.com/file/d/1z5VCwOX9M8-ckb1Wt75oON6aUjMpx2hT/view?usp=sharing
SM-T585
15. 20200815: august security patch: https://drive.google.com/file/d/1OgIcsnfRRr5bFx5gd1kvKvtb8lELIMQa/view?usp=sharing
14. 20200630: june security patch, review device tree, switch to samsung stock sound: https://drive.google.com/file/d/110Zz5mlotOnDuFAjtuC5vNKa4VU1N0_I/view?usp=sharing
13. 20200412: april security patch: https://drive.google.com/file/d/1-llAbO2lZQ2T1qq743MxXZNtuHp7eAUX/view?usp=sharing
12. 20200211: latest sources, February security patch: https://drive.google.com/file/d/1l0APlqEK20cgJIGbBzaaekBIJrNFkilr/view?usp=sharing
11. 20200113: latest sources, January security patch: https://drive.google.com/file/d/1OskSZS28m268HRcTeTqFO_HQKB7NgWky/view?usp=sharing
10. 20191202: rollback video driver to r22, merge kernel up to 3.18.140 (thanks @followmsi), aptx driver (thanks @followmsi), fix hotspot: https://drive.google.com/file/d/1hbwkqI1jpctUUitA0Zg1a3LPj02KfSTS/view?usp=sharing
9. 20191116: november security update: https://drive.google.com/file/d/1eb_RdaAw6JSCNb_EsSUsPQnvCqGF_OeF/view?usp=sharing
8. 20191114: beta version: update video driver up to r28, update omx codecs, latest updates from @followmsi: https://drive.google.com/file/d/1cewbOdJapapRjBbk1X8k2mv9B5viBPlD/view?usp=sharing
7. 20191028: disable Codec2.0 components (long delay on start youtube) (thanks @followmsi), fix vulkan libs (thanks @followmsi), fix hotspot (there is still a bug - you cannot turn on wifi after activating a hotspot? need reboot tablet, but at least hotspot working): https://drive.google.com/file/d/1mqsNknYnJSh5cbml7dQ-xd5m0a-KlyCm/view?usp=sharing
6. 20191013: audio from sources: https://drive.google.com/file/d/1ymo05w9m9xukDsfLrZz6iBJMKNgarF4x/view?usp=sharing
5. 20191007: fix sensors: https://drive.google.com/file/d/14jOLZjLPyClboBZ8H3C2O6Dt0kFmXghS/view?usp=sharing
4. 20191003: ril: https://drive.google.com/file/d/18ZPRh19Rao1xRPQ5zI9jz7WfYIdonLZ2/view?usp=sharing
3. 20190929: improved stability: https://drive.google.com/file/d/1H5iinjtP2MBObqE-QWqWP0IMN_rRqK9Y/view?usp=sharing
2. 20190928: fixed charger, home button: https://drive.google.com/file/d/1bog0dKKJ17eXa7vgu9cB0K1U8XWTqBzb/view?usp=sharing
1. 20190926: https://drive.google.com/file/d/1Inx1A-6VNqtJJhTO3rmodKL2tiS1x8LH/view?usp=sharing
Gapps
https://opengapps.org
Platform: ARM64
Android: 10.0
Root
Install latest magisk from canary channel (version 20.1+): https://forum.xda-developers.com/apps/magisk/dev-magisk-canary-channel-bleeding-edge-t3839337
TWRP
official twrp:
SM-T580: https://twrp.me/samsung/samsunggalaxytaba101wifi2016.html
SM-T585: https://twrp.me/samsung/samsunggalaxytaba101lte2016.html
Sources
Sources: https://github.com/lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Device: https://github.com/Valera1978/android_device_samsung_gtaxllte and https://github.com/Valera1978/android_device_samsung_gtaxlwifi
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxllte and https://github.com/Valera1978/android_vendor_samsung_gtaxlwifi
Thanks
Thanks to LineageOS team
XDA:DevDB Information
[ROM][SM-T580][SM-T585][UNOFFICIAL] Lineage 17.0 | Android 10 Q | 64bit, ROM for the Samsung Galaxy Tab A series
Contributors
Valera1978, Valera1978
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Based On: lineage
Version Information
Status: Beta
Created 2019-09-27
Last Updated 2019-09-27
Finally, I finished the first version of the new android q.
Initially I thought it would be an easy walk. But google in the new version made a huge amount of changes. And I spend about weeks to made something working.
I rebuild the config, wrote a library with sensors from scratch, there were big problems with wifi and sound. For the sound, I had to build a 32bit version to get the missing libraries.
hello how r u?
thx for your great works,
i always try your roms and you are the best
please is there any bugs for t585 before i try it?
and can u tell me how can i backup all of my phone with internal storage like norton ghost on windows pc?
can u tell me your telegram channel?
Hi, thanks for your great work.
I have installed and tested. For now this I have found:
- Magisk 19.3 and 19.4 do not work. Do not start the rom after installation.
- The battery percentage cannot be displayed in the status bar.
Seems to work GREAT on the 580, the only problem i have is I cant use the home button to wake the tablet. I've tried to configure the buttons in setting but it doesn't work. Only the power button will wake it....
michaeljr10wv said:
Seems to work GREAT on the 580, the only problem i have is I cant use the home button to wake the tablet. I've tried to configure the buttons in setting but it doesn't work. Only the power button will wake it....
Click to expand...
Click to collapse
Same here thanks for rom Valera
When my T580 boots, I get a message saying there is an internal error and to contact the manufacturer. I just ignore it and everything seems to work ok. That and the battery % are the only two nits I've come across so far.
lewmur said:
When my T580 boots, I get a message saying there is an internal error and to contact the manufacturer. I just ignore it and everything seems to work ok. That and the battery % are the only two nits I've come across so far.
Click to expand...
Click to collapse
I have that fault also with SM-T580 and in the Xiaomi Mi A1. It is a fault of Lineage. Just ignore it.
Clash Royale and Brawl Stars work great. The tablet is very fluid.
Great rom, first custom rome redirects the music via usb to my external dac without
extra app!!! Thanks for your great work Valera1978!
Thanks Valera
It works much smoother than stock and earlier aosp.
In addition to what the colleagues mentioned, it happens to me that in Google Chrome I open two tabs and restart the tablet
On the other hand with Firefox in a quick test of several tabs this did not happen.
Thank you for your spectacular work.
Thanks for the Android 10. Fast rom but some random reboot.
This rom look awsome, i will flash it when i will be able to unlock my tablet with the home button
Reboots
Updated to the 09/28 version. Have a problem with the tablet rebooting. I'm trying to use AZ Recorder to record streams from Tubi TV. Start AZ and then Chrome and try to load the Tubi site and the tablet reboots. Did the same thing on the earlier version.
New version 20190929. Hope random reboots now gone away. Was done set of fixes.
Checking few hrs, no any reboots.
Magisk 19.3 and 19.4 unsupported
Nuzza said:
Magisk 19.3 and 19.4 unsupported
Click to expand...
Click to collapse
Yes, checked a bit, magisk modifing init in the boot and somehow corrupt it and then on load init cann't get partitions information from dtb.
And internal su also not finished yet.
My primary phone is xiaomi mi9 - more then month I'm on android q and magisk 19.3 working great here.
I'll back to check magisk soon, I need root too.
Nuzza said:
Magisk 19.3 and 19.4 unsupported
Click to expand...
Click to collapse
I thought Android 10 you need the Magisk 19.5, still canary builds so might have some issues.
Github Tree
Zip File
You can give it a try if you want
Thanks, valera. But dont' work accelerator.
Keeps giving random errors on the sm-t580
Thanks for update. Random reboot go away. I found few bug. Accelerator and recent files display issue. Thanks
PixelExtended for Redmi 7A [pine]
What is this?PixelExtended is an Open Source Custom ROM based on PixelExperience, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features missing in Pixel Experience, The ROM will keep it's Pixel ideologies it's primary focus and wont stray into the dark and deep void that is bloat.
Based on Android 12
Whats working?Wi-Fi, RIL, Mobile data, GPS, Camera, Flashlight, VOLTE, VOWIFI, Recorder, Bluetooth, FM radio, Fingerprint reader, Lights, Sound/Vibration.
Known issues :-None, You tell me
Features & change logs :-Source side change logs :- Here
Device side change logs :- Here
Notes :-- All possible features are toggleable
- So you always can choose to be stockish.
- Don't flash gapps they are already included
- Can't access the Internal storage in recovery? Read this
Download :- HereDonate :-Liked my work? Give me a beer
Stay tuned :-PixelExtended Channel @pexupdates
Pixel Extended Group @pixelextended
Redmi 7A channel @Redmi7Aupdates @mi_sdm439
Redmi 7A Groups @pineofficial @mi_sdm439_group
need help from me?
Join my telegram group - @hsxprjkt
Android OS version: 12
PIxelExtended version - 4.1
Security patch level: January 2022
Device Source code: https://github.com/PixelExtended-Devices
Kernel Source code
https://github.com/hsx02/kernel_xiaomi_sdm439
Build author/Device Maintainer: Hiteshsoni
Source code: https://github.com/PixelExtended
PixelExtended Developer: Aryan Gupta
Gonna test this out... Will give feedback soon.
Hsx02self said:
PixelExtended for Redmi 7A [pine]
What is this?PixelExtended is an Open Source Custom ROM based on PixelExperience, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features missing in Pixel Experience, The ROM will keep it's Pixel ideologies it's primary focus and wont stray into the dark and deep void that is bloat.
Based on Android 12
Whats working?Wi-Fi, RIL, Mobile data, GPS, Camera, Flashlight, VOLTE, VOWIFI, Recorder, Bluetooth, FM radio, Fingerprint reader, Lights, Sound/Vibration.
Known issues :-None, You tell me
Features & change logs :-Source side change logs :- Here
Device side change logs :- Here
Notes :-- All possible features are toggleable
- So you always can choose to be stockish.
- Don't flash gapps they are already included
Download :- PixelExtended_pine-12.0-20220126-1343-OFFICIAL.zip
Donate :-Liked my work? Give me a beer
Stay tuned :-PixelExtended Channel @pexupdates
Pixel Extended Group @pixelextended
Redmi 7A channel @Redmi7Aupdates @mi_sdm439
Redmi 7A Groups @pineofficial @mi_sdm439_group
Android OS version: 12
PIxelExtended version - 4.1
Security patch level: January 2022
Device Source code: https://github.com/PixelExtended-Devices
Kernel Source code
https://github.com/hsx02/kernel_xiaomi_sdm439
Build author/Device Maintainer: Hiteshsoni
Source code: https://github.com/PixelExtended
PixelExtended Developer: Aryan Gupta
Click to expand...
Click to collapse
Hi, I've tried the ROM and it's working nicely. Everything seems to function, even the rounded corners are perfect... at least on the top. The corners at the bottom have what seems like a one or two pixel gap/line. I hope this is not just me and is fixed soon.
I have a question. Is this version with encryption enabled OoTB? Cause previous version was and I would need unencrypted version (am using app with it's own encryption witch doesn't work with encypted phone).
Update: Thx for providing never version of OS
Everthing works just fine.
However I found some issue (maybe it's just on my end):
when I tried to update the apps with automatic update the Play Store somewhat just hang at Waiting.
No updated files where downloading, the circle icons was spinning but nothing happened. After an hour or so I just aborted the update and went updating manually one app after another. And it worked!
SO as I said I don't know if it was something on my end or it was some hickup with Play Store, but the OS works great.
Thx again
hello, can i ask what is the requirements and steps to flash this? I am on MIUI Global 12.5.2 Unlock BL.
zildjen02 said:
hello, can i ask what is the requirements and steps to flash this? I am on MIUI Global 12.5.2 Unlock BL.
Click to expand...
Click to collapse
https://t.me/hsxdiscussion ask here
Hello,
I'm using this rom since couple of time now, the past version aswell.
I have to say that this is the best rom ever for redmi 7A.
Baterry is perfect everything smooth
I noticed one probleme about Vowifi that i can't make it work, at least Volte is working properly.
i tryed to use last xiaomi firmware flash, reset apn etc.. almost everything, IMS says registered volte: avaible vowifi: unavaible so i guess it's maybe a rom problem if other people can test. FRANCE: FREEMOBILE.
Thanks
Could you please tell me how to install it?
I installed twrp64 but after flash this rom it reboot only to twrp
i don't know dzikk it works directly for me .
the only problem for me on this rom is vowifi not working with france provider FREE MOBILE.
If you have any idea how i can fix this thanks
Tryed to make vowifi working following this tutorial :
[GUIDE] Activate VoWiFi / WLAN Call
First of all a BIG thanks to ed-gonzo He made this possible :) This is the instruction to activate VoWiFi / WLAN Call on the Poco F1 Its tested and verfied to work with EU ROM (Oreo , Pie and Q based) and german provider o2 (Telefonica) Before...
forum.xda-developers.com
The phone keep disconnecting, reconnecting never end ..from computer when usb plug after this command:
setprop sys.usb.config diag,serial_cdev,rmnet,adb
tried on 2 pc with qualcom driver.
At least if i put android in DOWNLOAD MODE its working fine the phone is recognized with qualcom driver by QPST TOOL..
Hello,
Can you add to the Kernel the use of OTG and simultaneous Charging on the Redmi 7A? I don't know how to do it, but I know other people did it with other phones, such as all the sunxi chip using devices (https://linux-sunxi.org/USB_OTG_Charging_Hub) as well as https://forum.xda-developers.com/t/...charging-adaptor-on-my-moto-g-xt1032.3431856/ or the Timur's Kernel the https://forum.xda-developers.com/t/rom-nexus-7-2013-timurs-v4-0-android-6-0-1-mob30x-flo-deb.3523149/.
If you don't plan to add it to the official rom, could you at least tell me how to modify the Kernel to permit simultaneous OTG and charging and what to modify?
Thanks for your time,
Best regards,
Golobolo
Hi! Any way to do this on 32 bit Redmi 7A? tysm...
Vendor for GSI ARM32/ARM64 Samsung Galaxy M01/A01 A11/M11 A02s/M02s
Added ArrowOs 12.1 as test GSIGoogle Play included
Info about Arm32 VendorYou can boot any arm32 gsi android 10/11/12/13+
You can boot only arm32 gsi android 12/13+ in a11q/m11q
Call sounds are work only in android 12+ gsis
Premissive Kernel
Volte Not work
Info about Arm64 VendorYou can boot any arm64 gsi android 10/11/12/13+
Call sounds are work only in android 12+ gsis
Premissive Kernel only in a02s/m02s
Some says fast charging not work in a02s/m02s
Volte Not work
Special thanks for @phhusson for fix calls
Thanks for dealing with phhusson
@Sergey23421
@VenturX
Downloads
Tested GSIsDotOs 5.2
ArrowOS 12.1
Bananadroid 13
AnceinctOs 11
Pixel Experice 13
Crdroid 7.13
Project Blaze 13
Telegram
@samsung_galaxy_m01_a01_m11_a11
my a02s with crdrom-v316-220330-arm64-bgZ.img.xz ( CrDroid Android 12 + GApps )
- Gboard crash in settings & if update apps stop working always
- Back Camera focus sensor not working
before i test ancient os 7.1 ( Android 13 + GApps)
- face lock in wizard setup not working and can't skip
- as before Camera focus sensor not working and Gboard crash always
"The reason why I'm using GSI+GApps is because I can't Flash GApps in TWRP" (Error 70)
but everything pretty good
test apps, games arm64 no problem
jirathx said:
my a02s with crdrom-v316-220330-arm64-bgZ.img.xz ( CrDroid Android 12 + GApps )
- Gboard crash in settings & if update apps stop working always
- Back Camera focus sensor not working
before i test ancient os 7.1 ( Android 13 + GApps)
- face lock in wizard setup not working and can't skip
- as before Camera focus sensor not working and Gboard crash always
"The reason why I'm using GSI+GApps is because I can't Flash GApps in TWRP" (Error 70)
but everything pretty good
test apps, games arm64 no problem
Click to expand...
Click to collapse
contact on telegram
Samsung Galaxy SDM439/450 Community 🇱🇰
Channel: @samsung_galaxy_m01_a01_m11_a11
t.me
It is necessary to fix the wi-fi, it catches the connection very badly, arm 32.It is necessary to fix the wi-fi, it catches the connection very badly, arm 32.
Vitaly75 said:
It is necessary to fix the wi-fi, it catches the connection very badly, arm 32.It is necessary to fix the wi-fi, it catches the connection very badly, arm 32.
Click to expand...
Click to collapse
I just used stock a02s vendor for arm32
Hi, currently using this with Pixel Experience 12