Any good op6t cases?
I like my Supcase Unicorn Beetle. Everything is great about it, except the back is a finger print magnet.
I was eyeballing the rhinoshields, I've used them in the past and they are usually pretty great.
Sent from my ONEPLUS A6013 using Tapatalk
I use the Spigen Liquid Air Armor. I'm a fan of Spigen cases and have always found them to be high quality and moderately priced. This particular case has nice sized lip on the front to guard against damages from placing the phone face down on surfaces. The case is grippy in the hands and has a nice matte finish and diamond texture pattern on the back. The cutouts for the buttons and charging port are perfect and do not interfere with operations in any manner. It also doesn't add a tremendous amount of bulk on what is already a pretty sizable phone.
Spigen Liquid Air Armor for when I want to use a case. It's thin and the button feedback is the best. Spigen has, in my opinion, the best buttons on any case out there. Always clicky, always easy to find. Most of time I don't use a case because I use the camo skin from Dbrand. I may try out the bumper case from Rhino Shield. I tried it twice with for my Note 9 but I sent it back because the buttons were just too difficult to register a click compared to Spigen cases. I hope maybe this time around with the 6T Rhino Shield has improved the buttons. But it's still under pre order for now. Shipping "around end of December".
https://rhinoshield.io/pages/shop/OnePlus?device=oneplus-6t&category=crashguard&prod=oneplus-6t-bumper-case
I use the official OnePlus 6t red silicon case it awesome and stuck to your hand lol
Using the Tudia Merge in black. It is a little slippery, but I'm ok with it.
KuGi OnePlus 6T case
I just ordered the "KuGi OnePlus 6T case" from Amazon. We'll see how it goes. I was between this one and the Spigen. I have almost always bought Spigen cases for my previous phones but figured I would try something different for once.
pandachee3 said:
I use the official OnePlus 6t red silicon case it awesome and stuck to your hand lol
Click to expand...
Click to collapse
I'm thinking about getting that, been hoping they'll release it in black. But I need sticky so my phone doesn't slide all over the top of the dashboard in my car.
If you want to buy from OnePlus I suggest the sandstone and red silicone case. I have no complaints.
lloydsw said:
I'm thinking about getting that, been hoping they'll release it in black. But I need sticky so my phone doesn't slide all over the top of the dashboard in my car.
Click to expand...
Click to collapse
They won't release black version at all. But the red is also so good
anyone know of a good all clear back case with good protection?
viciouzRed01 said:
anyone know of a good all clear back case with good protection?
Click to expand...
Click to collapse
https://www.amazon.com/OnePlus-GETE-Lightweight-Crystal-Protection/dp/B07JJNVG21/
For the ones looking for a good cheap wallet case. I definitely wanted one with hard inner shell. Most manufacturers use the soft TPU Silicon inner Shell but I think it makes the phone look bulky and it also makes reaching the screen edges harder and sometimes connecting USB sticks harder or impossible.
That's why I prefer the hard inner case, they fit much more elegantly and slick. Disadvantage is the hard inner Shell trends to get brittle and break over time, but with these prices I would rather order again than use the Silicon version cases. Price is unbeatable!
I searched everywhere and finally I found what I was looking for :
https://www.tvc-mall.com/details/cr...-case-for-oneplus-6t-brown-sku104000594c.html
They have 2 versions Black and brown, I ordered both and can only recommend!
i love the nylon case
Looks like Spigen is finally going to give us 6T users the Tough Armor treatment. But I hope they release more color options. I never liked the grey. Either all black or something with bright color.
https://www.amazon.com/Spigen-Tough-Armor-Designed-OnePlus/dp/B07K6X45DP/ref=sr_1_68?ie=UTF8&qid=1545732962&sr=8-68&keywords=OnePlus+6T+Case
roaduardo said:
Looks like Spigen is finally going to give us 6T users the Tough Armor treatment. But I hope they release more color options. I never liked the grey. Either all black or something with bright color.
https://www.amazon.com/Spigen-Tough-Armor-Designed-OnePlus/dp/B07K6X45DP/ref=sr_1_68?ie=UTF8&qid=1545732962&sr=8-68&keywords=OnePlus+6T+Case
Click to expand...
Click to collapse
Thank you for this. I had asked them on Twitter if any other cases were coming as I don't like the diamond look of the liquid air. They said December, but I can wait another month. Ordered.
GiSS88 said:
Thank you for this. I had asked them on Twitter if any other cases were coming as I don't like the diamond look of the liquid air. They said December, but I can wait another month. Ordered.
Click to expand...
Click to collapse
How was their customer relations skills on Twitter? Because RhinoSheild sure needs to give their Twitter handler a vacation or something because they didn't seem too happy with my questions.
roaduardo said:
How was their customer relations skills on Twitter? Because RhinoSheild sure needs to give their Twitter handler a vacation or something because they didn't seem too happy with my questions.
Click to expand...
Click to collapse
They're usually good, but slow this time around.
Hi, Do you think the case that comes in the box is good in protecting the phone from drops ?
Shady282 said:
Hi, Do you think the case that comes in the box is good in protecting the phone from drops ?
Click to expand...
Click to collapse
Not really. Not much drop protection.
Related
Hello XDA,
Im looking for a case that will protect the nexus 6 from minor drops and that i will be able to enjoy from its beatiful desing and its white color.
I dont want the case to hide the white color on the back and the "NEXUS" writting. It will be great if the case could seal the audio input to prevent it from getting dirt and eventually ruining it.
I dont mind if the case will make my phone bigger or heavier by much.
Highly prefer Mat material and not plastic because plastic fealing makes my hand sweat.
Could you please recommend me a good case that fits my needs?
Appreciate any help offered!
I got this one and like it. Transparent back and choice of color for the sides. Cutouts are accurate.
http://m.ebay.com/itm/201211908726?nav=SEARCH
Sent from my Nexus 6 using Tapatalk
Its up to you, there is no "best transparent case" but there are many good choices.
Here are my favorites for clear/transparent casesmost of my cases are clear/transparent)
SUPCase (frosted clear PC back with TPU bumper)
TUDIA ( TPU Clear top and bottom with a matte clear back
Cruzerlite (clear back and sides TPU with android logo on back)
Evecase (100% clear TPU case but the buttons are hard to push)
Ringke Fusion (hard PC back with TPU bumper)
I'm a big fan of my Orzly Flexislim. It's the frosted clear color. There's also a smoky black one out there but since you've got a Cloud White I figure this is most applicable to you.
Here's an Imgur album of photos I snapped for someone else to review: http://imgur.com/a/1glfT
sosquidtaste said:
I'm a big fan of my Orzly Flexislim. It's the frosted clear color. There's also a smoky black one out there but since you've got a Cloud White I figure this is most applicable to you.
Here's an Imgur album of photos I snapped for someone else to review: http://imgur.com/a/1glfT
Click to expand...
Click to collapse
How are the buttons? It looks good except for the huge microphone hole.
Pilz said:
How are the buttons? It looks good except for the huge microphone hole.
Click to expand...
Click to collapse
Buttons are probably my least favorite part of the case. It's just cut-outs, and the material left around the cutouts is pretty thin. I'm not afraid it will tear or anything, just that they are the two bits of wiggliness on the otherwise solid case.
On the plus side all the sides (both top and bottom) are covered all the way around which is nice. This is in contrast to cases like the Bear Motion sandstone case or other similar snap-on cases that leave the top and bottom exposed.
sosquidtaste said:
Buttons are probably my least favorite part of the case. It's just cut-outs, and the material left around the cutouts is pretty thin. I'm not afraid it will tear or anything, just that they are the two bits of wiggliness on the otherwise solid case.
On the plus side all the sides (both top and bottom) are covered all the way around which is nice. This is in contrast to cases like the Bear Motion sandstone case or other similar snap-on cases that leave the top and bottom exposed.
Click to expand...
Click to collapse
Eh I was hoping they would be covered. I just ordered two more cases because I'm a case whore when I get a phone. I bought a Spigen Ultra Hybrid (the all clear version) I'll post pictures when it arrives Monday. I also bought a Diztronic ultra
Thanks for your replys guys. You've helped me alot. I'm debating between the Ringke FUSION case and the Ringke MAX case. It seem they are the two that best fits my needs. The only thing that prevents me from getting the FUSION over the MAX is that im not sure the case will feel good in my hand. I tend to sweat in my hands specially holding cheap plastic so i fear ill have it with the FUSION case. Is there anyone here that has the FUSION and can share his expirience about the material and grip of the nexus with the fusion case?
sosquidtaste said:
Buttons are probably my least favorite part of the case. It's just cut-outs, and the material left around the cutouts is pretty thin. I'm not afraid it will tear or anything, just that they are the two bits of wiggliness on the otherwise solid case.
On the plus side all the sides (both top and bottom) are covered all the way around which is nice. This is in contrast to cases like the Bear Motion sandstone case or other similar snap-on cases that leave the top and bottom exposed.
Click to expand...
Click to collapse
the cutout is my fav, in this way the buttons are flushed with the case. Preventing alot of accidental presses.
well, to each his own....this flexislim is my fav case at the moment. Just hope that it comes with more colors.
I just received my Ringke Slim clear yesterday. I dig it:
http://www.amazon.com/Free-Screen-P...20902817&sr=8-2&keywords=ringke+nexus+6+clear
I have Spigen ultra hybrid with clear back and gun metal sides, and the Ringke fusion clear. Still making up my mind which I prefer. The Ringke has caps for the headphone and USB sockets....the headphone one is OK but the USB takes a bit of fiddling to get it to close flush. I think I prefer the feel of the Ringke but the Spigen feels a little more solid. The Ringke is better for the buttons, there's a clear separation between the power and volume buttons. With the Ringke case there's a clear audible click when the buttons are pressed, which I don't get with the Spigen. Both cases work OK with my tylt vu charger.
bmw4l1f3 said:
I just received my Ringke Slim clear yesterday. I dig it:
http://www.amazon.com/Free-Screen-P...20902817&sr=8-2&keywords=ringke+nexus+6+clear
Click to expand...
Click to collapse
ericjennings said:
I have Spigen ultra hybrid with clear back and gun metal sides, and the Ringke fusion clear. Still making up my mind which I prefer. The Ringke has caps for the headphone and USB sockets....the headphone one is OK but the USB takes a bit of fiddling to get it to close flush. I think I prefer the feel of the Ringke but the Spigen feels a little more solid. The Ringke is better for the buttons, there's a clear separation between the power and volume buttons. With the Ringke case there's a clear audible click when the buttons are pressed, which I don't get with the Spigen. Both cases work OK with my tylt vu charger.
Click to expand...
Click to collapse
Those are excellent cases but its very important to me that the case will have caps for headphone and usb. I think ill go with the Ringke FUSION case.
torecdude said:
Those are excellent cases but its very important to me that the case will have caps for headphone and usb. I think ill go with the Ringke FUSION case.
Click to expand...
Click to collapse
Curious as to why you would want them covered? (asking as I may want to follow suite)
bmw4l1f3 said:
Curious as to why you would want them covered? (asking as I may want to follow suite)
Click to expand...
Click to collapse
As you can see in my signiture, i had Motorola atrix 4G as my daily driver before the Nexus 6. I didnt use the audio port quite much and it got ruined by the dust overtime. Same thing about the hdmi port but not the usb port.
I had the atrix for almost 3 years and those port got ruined twice after i repaired them. If i took the atrix to the beach i noticed it always got sand into the port even i didnt took it out from my backpack. Sand can get in from the tiniest holes and i plan to use the nexus 6 for a long time, therefore i wanna make sure i get the best suitable case for me.
Cheers.
Huge fan of the Cruzerlite cases. I have the clear one on my N6 now and it's great.
EDIT: I'm using a Dbrand skin, so I switched to Ringke Fusion Crystal so I could see the skin more clearly on the back. Fantastic clear case.
Tried due diligence and to search for the right thread.
I picked up the Fosman case on Amazon, one of the cheapo $10 ones, and it's turned out pretty great. Love the matte/frosted back, though I wish it were a bit more transparent so the black came through better. Good purchase, though I'm sure all of these TPU / cruzerlite / whatever companies are pretty much selling the exact same product.
torecdude said:
Thanks for your replys guys. You've helped me alot. I'm debating between the Ringke FUSION case and the Ringke MAX case. It seem they are the two that best fits my needs. The only thing that prevents me from getting the FUSION over the MAX is that im not sure the case will feel good in my hand. I tend to sweat in my hands specially holding cheap plastic so i fear ill have it with the FUSION case. Is there anyone here that has the FUSION and can share his expirience about the material and grip of the nexus with the fusion case?
Click to expand...
Click to collapse
I hav both and they both have good grip on the sides and are a bit slick on back.
Two others you might want to consider are the uag maverick and the poetic affinity. They both have threads here so search and read about them. I have the uag and like it but the back is a little ugly imo. I will be getting the poetic tomorrow, and yes, I have a problem with buying cases. I want to keep my Max incase I want to go back to it but I have a clear fusion I could send you for the price of shipping if you'd like. Send me a pm or email if you're interested.
bmw4l1f3 said:
Curious as to why you would want them covered? (asking as I may want to follow suite)
Click to expand...
Click to collapse
I cover my ports also to keep crap out..even if you find a case you like but it doesn't have covers you can always spend a couple bucks and grab silicone port plugs online... I use them when not in my OtterBox on my Note and they work well.
kingston73 said:
I hav both and they both have good grip on the sides and are a bit slick on back.
Two others you might want to consider are the uag maverick and the poetic affinity. They both have threads here so search and read about them. I have the uag and like it but the back is a little ugly imo. I will be getting the poetic tomorrow, and yes, I have a problem with buying cases. I want to keep my Max incase I want to go back to it but I have a clear fusion I could send you for the price of shipping if you'd like. Send me a pm or email if you're interested.
Click to expand...
Click to collapse
How did you like the UAG compared to the Ringke Max? I have the Max now and while I like it I find it a bit slippery on the back, so now I'm gonna try the UAG.
jaggrey said:
How did you like the UAG compared to the Ringke Max? I have the Max now and while I like it I find it a bit slippery on the back, so now I'm gonna try the UAG.
Click to expand...
Click to collapse
They are both very good cases. The UAG is a little slimmer maybe, but not much. I might actually go back to the Max, I haven't decided yet. I think if you like the one you'll like the other. I guess the one advantage the UAG has is, even though it's still slick plastic the indents on the back give a little more grip, and the volume buttons feel better.
http://www.amazon.com/gp/product/B00OH4HY3G/ref=od_aui_detailpages00?ie=UTF8&psc=1
Has any users here used or have this case for their nexus 6? I already paid for it and it will be here tomorrow using amazing 1 day shipping. Curious what others think.
I have it. Bought it and the ringke fusion same time. I like both, and quality seems to be identical. That being said I find I use the ringke more as it has the accent depression on the back that feels good in hand, as well as the protruding buttons are easier to distinguish.
The upside if the spigen however, is that it seems to have less of a rainbow effect on the back at certain angles.
I have this case, I love it because of the clear back, really shows off the beauty of the Nexus 6. However, as mentioned by the other poster, this case makes it very hard to distinguish the power and volume buttons. The buttons on my case also weren't very tactile, I always find myself hitting the wrong one. But, I still thoroughly enjoy this case, it protects the Nexus 6 very well.
patheticpuma said:
I have it. Bought it and the ringke fusion same time. I like both, and quality seems to be identical. That being said I find I use the ringke more as it has the accent depression on the back that feels good in hand, as well as the protruding buttons are easier to distinguish.
The upside if the spigen however, is that it seems to have less of a rainbow effect on the back at certain angles.
Click to expand...
Click to collapse
Thanks. I am putting a dbrand skin on it...blue one actually. So excited about this. Thanks I always used Spigen for all my devices. Just figured I ask. Is this a slip on type one or is it clip like the metal ones? I didnt really find anything about how it gets put on.
I just push the bottom of the phone in and snap it down in. The border is tpu, so it has some flex while offering some drop protection.
I use a black carbon fiber slickwrap on my n6, and it really does emphasize the beauty of this beast.
patheticpuma said:
I just push the bottom of the phone in and snap it down in. The border is tpu, so it has some flex while offering some drop protection.
I use a black carbon fiber slickwrap on my n6, and it really does emphasize the beauty of this beast.
Click to expand...
Click to collapse
I checked via web for a review of this (video) is there one?
I know there is one comparing the 2 cases I have, I ordered both right after watching it. I'm at work right now so I can't really track down the link.
patheticpuma said:
I know there is one comparing the 2 cases I have, I ordered both right after watching it. I'm at work right now so I can't really track down the link.
Click to expand...
Click to collapse
thats ok i already bought it. The last thing I am wonder is do u have a screen protector on it with this case or the glass screen protectors? will they work with this case?
The glass do yes, but I got rid of mine because I hate the halo. I'm using the plastic one that came with my ringke.
Nice case ..
Has anyone found an ultra thin case like a Calicase or Peel?
so far i can't find one. i loved the offical LG case for the nexus 5x. it was basically a cover for the back and had cutout on the bottom. all i want is to protect the back from scuffs. don't need a big case.
I'm holding out for the Ringke Slim to come out for the Pixel. It's been a perfect slim case for my old Nexus 5, Nexus 5X, and then the 6P.
I'll be using the Pleson TPU case in the mean time.
I ordered a pleson from amazon. It features some sort of dots on the back to prevent sticking air bubbles patterns. Get get on my s6edge with tpu cases today. We'll see how it holds up.
I've been looking for a thin case myself. I just put my Pixel into this case a few minutes ago:
Crappy S6 Edge photo
Amazon link
I was skeptical because of the top and bottom which typically are nonexistent on these types of cases but I'm very happy.
d-pak said:
I ordered a pleson from amazon. It features some sort of dots on the back to prevent sticking air bubbles patterns. Get get on my s6edge with tpu cases today. We'll see how it holds up.
Click to expand...
Click to collapse
the Pleson one is one of my favorites! here it is on my pixel
roccom33 said:
I've been looking for a thin case myself. I just put my Pixel into this case a few minutes ago:
Crappy S6 Edge photo
Amazon link
I was skeptical because of the top and bottom which typically are nonexistent on these types of cases but I'm very happy.
Click to expand...
Click to collapse
I was looking at this case last night! Looks like the Ringke Slim, which I've had in the past and loved. Was it tight when putting it on? My only concern with these kinds of cases is scraping the edges of the phone when putting it on/taking it off.
daewond3r said:
I was looking at this case last night! Looks like the Ringke Slim, which I've had in the past and loved. Was it tight when putting it on? My only concern with these kinds of cases is scraping the edges of the phone when putting it on/taking it off.
Click to expand...
Click to collapse
I just popped it out and back in to see and no it didn't seem to be too tight. I don't believe this is a concern. The edges of the case are also rounded and have a soft matte type of finish.
Good case option from Amazon
If you need a quick case at a good price, try this one out. I ordered it in advance. It isn't that special but does the basics. I think it is slim, but not ultra slim. Check it out until more cases hit the market. Different colors and styles are available.
Search amazon for this name and brand. $7.99 shipped:
Google Pixel Case, DGtle [Shock Absorbent] Anti-Scratches TPU Gel Premium Slim Flexible Soft Bumper Rubber Protective Case Cover for Google Pixel (Smoke Black)
What I need is something like the custom live cases from Google, but not at $50 CAD. I have a Spigen thin fit on my 6P and I'm looking for something similar, but not clear.
what you guys are listing and talking about are thin cases, OP is looking for ultra thin cases, like the orzly flexslim series:
http://orzly.com/products/flexi-slim
I hoping they will come out with one for the pixel too, these are really just for scratch protection and will offer literally no drop protection, its similar to having a slim on your phone but more flexibility as you can just put it on and take it off easily.
---------- Post added at 10:58 PM ---------- Previous post was at 10:57 PM ----------
roccom33 said:
I've been looking for a thin case myself. I just put my Pixel into this case a few minutes ago:
Crappy S6 Edge photo
Amazon link
I was skeptical because of the top and bottom which typically are nonexistent on these types of cases but I'm very happy.
Click to expand...
Click to collapse
Could you post a few more pics? I'm thinking of ordering this case too.
Thanks!
i'm hoping to go with just a bumper case around the outer edge, because this phone is a beauty and i dont want to cover it up! that said, if i did get a full case and wanted to keep it relatively slim, i'm probably go with the diztronic matte slim case. i have one on my 5x, and it's been not only great at protecting on minor falls and bumps, but has held up extremely well over time. couldn't say enough about that case. looks like amazon currently has it available for purchase, but it's not shipping until 11/4.
I'm using this i love the feel and fit on it. https://www.amazon.com/gp/product/B01LEAMYFS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&th=1
Poli169 said:
I'm using this i love the feel and fit on it. https://www.amazon.com/gp/product/B01LEAMYFS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&th=1
Click to expand...
Click to collapse
Are the edges the same color as the back (a matte black)? or are they glossy?
Poli169 said:
I'm using this i love the feel and fit on it. https://www.amazon.com/gp/product/B01LEAMYFS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&th=1
Click to expand...
Click to collapse
I was interested until I read some reviews stating that it's thick
Sent from my Pixel using XDA Labs
Spigen Case
FoleyRose said:
What I need is something like the custom live cases from Google, but not at $50 CAD. I have a Spigen thin fit on my 6P and I'm looking for something similar, but not clear.
Click to expand...
Click to collapse
http://www.ebay.com/itm/Spigen-Rugg...748052?hash=item3f6ce2e254:g:fj4AAOSwzaJX~SAC
MNMichael said:
http://www.ebay.com/itm/Spigen-Rugg...748052?hash=item3f6ce2e254:g:fj4AAOSwzaJX~SAC
Click to expand...
Click to collapse
Thanks for the suggestion, but that's actually exactly the case I have on right now. What I meant was a case with open top, open bottom and open buttons. But not clear.
There seems ot be some confusion on what an "Ultra thin" case actually is. let me help you guys better understand this, and why android people want huge clunky cases baffles me, but coming from a lifetime of androids, then switching to a 6s, and having a fantastic case experience... this is annoying.
This is an ultra thin case:
https://www.amazon.com/gp/product/B00JH87ZSQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Notice the use of factory buttons, it does not cover the bottom of the device, yet still wraps the corners so if dropped is protected. so far the closest I have found on amazon for my Pixel is this case from this thread:
https://www.amazon.com/gp/product/B01M3MQCG0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Which I ordered, and will arrive Thursday.
If there are plastic buttons that cover up the factor buttons that stick out of the case, it's safe to assume it's not an ultra thin case.
Just got that one by Maxboost and I can confirm its definitely the thinnest "case" out there right now. It's definitely a shell more than a case, and it's a bit slick, but overall I think I'm gonna stick with it. I used some fine steel wool to give it some grip, and it feels better IMO.
Sent from my Pixel using XDA Labs
the tree said:
There seems ot be some confusion on what an "Ultra thin" case actually is. let me help you guys better understand this, and why android people want huge clunky cases baffles me, but coming from a lifetime of androids, then switching to a 6s, and having a fantastic case experience... this is annoying.
This is an ultra thin case:
https://www.amazon.com/gp/product/B00JH87ZSQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Notice the use of factory buttons, it does not cover the bottom of the device, yet still wraps the corners so if dropped is protected. so far the closest I have found on amazon for my Pixel is this case from this thread:
https://www.amazon.com/gp/product/B01M3MQCG0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Which I ordered, and will arrive Thursday.
If there are plastic buttons that cover up the factor buttons that stick out of the case, it's safe to assume it's not an ultra thin case.
Click to expand...
Click to collapse
Bingo bingo. People don't seem to get it. I settled for the maxboost also but it looks like decent space between the camera and the case worrying me. Calicase and peel are the leaders IMHO in this thin case space. Just no love for the pixel.
charklos said:
Just got that one by Maxboost and I can confirm its definitely the thinnest "case" out there right now. It's definitely a shell more than a case, and it's a bit slick, but overall I think I'm gonna stick with it. I used some fine steel wool to give it some grip, and it feels better IMO.
Click to expand...
Click to collapse
Thanks for confirming. I was hoping for the ultra thin tpu. Can you add some pictures of it after the wool treatment?
I do not usually put my phone in a case because I do not like to add bulk. I like to keep it as slim and trip as possible. I am coming from a prior phone that had a rubberized surface on the edges and back (Droid MAXX - the original). The Pixel is a bit slippery for me.
I am curious what solutions people would recommend for the best way to add grip to the Pixel without adding bulk. Maybe I need to go with one of the thin cases, or maybe there is a skin that could help? I don't need to decorate the phone, but if there is a skin that helps it grip better I would give it a try.
Your options are case, skin, and naked. For cases, you're not going to get any thinner than the Nillkin Nature cases. I'm not a fan of the one I have but it's undeniably low in bulk. For skins, the are a ton of options and you'll have a variety of opinions but if you don't want a case, that's about your best option.
Some skins are grippier than others, even win a single manufacturer, so it's worth asking the manufacturer about it. For example, for dBrand their grippier skins tend to be the carbon fiber options.
Good luck!
I've said this in the other cases thread on here, but I'll post again just in case people don't know about that other thread.
Caudabe (http://www.caudabe.com) makes great, very slim cases for iPhones.
If you email/tweet them to make Veil XT for Google Pixel/Pixel XL, they might consider it.
You can try reaching out to Shumuri too (http://shumuri.com)
I wish that their was an antigravity case for the pixel... I can't stand mounts and would love to just stick my phone to my instrument panel
Based on my experience with them on other phones, a skin won't provide anywhere near as much grip as the surface on that Droid Maxx.
Instead, take a look at the thread on ultra-thin cases:
http://forum.xda-developers.com/pixel/accessories/ultra-case-t3483579
The Nillkin Nature cases are very slim and definitely add grip to the phone. You can see pics in my post here:
http://forum.xda-developers.com/pixel/accessories/pixel-t3475315/post69764947#post69764947
Google Pixel (XL) Matte Black Skin Premium Quality SAMSUNG 3M Scotchprint 1080
http://www.ebay.com/itm/291970270753?var=590965880055
You can't go wrong with the UAG cases. The plasma series is surprisingly thin and light, but really has great edge and drop protection. they feel great in the hand. They are a little higher in price, but totally worth it.
https://urbanarmorgear.com/collections/type-plasma-series/products/plasma-series-google-pixel
I had one for my Note 5 and then S7, and I'm will be picking up another for my Pixel.
Sent from my Pixel using Tapatalk
Metalsauce said:
You can't go wrong with the UAG cases.
Click to expand...
Click to collapse
+1. I received the Ice case yesterday; using it on the silver Pixel. I wanted a slim grippy case, one with black rubber to hide the darkening that occurs with time on rubbery areas of phone cases, and a clear back to display the silver/white of the phone. This case is PERFECT. It looks great. And the grip is fantastic.
I just received a blue Speck Presidio Grip and it's a very nice case for adding grip. The blue one is hard to find unless you pay quite a bit of $$ (I found a listing on eBay for used under $20) but the black version can more easily be found for under $20.
The case fits very well without being too difficult to take on and off. The added grip is good without being extreme. The hard plastic has a nice matte feel to it (the previous Speck cases I had was glossy but I like this better). And the buttons have a good clicky feel to them. It's not a minimalistic case like the Nillkin Nature but it's tons better than something like the Incipio Dual Pro.
Hope this helps somebody!
I've been meaning to try the DBrand skins for a while. Just ordered the bamboo version for my silver Pixel. Will update how it is. I have high hopes as the reviews are overwhelmingly positive.
Sent from my Pixel
kkh786 said:
I've been meaning to try the DBrand skins for a while. Just ordered the bamboo version for my silver Pixel. Will update how it is. I have high hopes as the reviews are overwhelmingly positive.
Click to expand...
Click to collapse
They are very good skins! Do yourself a favor and be sure to use their videos for installation, don't skip steps, and give yourself plenty of time.
Just installed the bamboo skin. Looks good. Not perfect installation as am not patient enough. Haha.
Sent from my Pixel
I'm getting a Slickwrap skin. I've been using dbrand for a while now... Just want to try something different.
I've purchased two Toast skins now and I really like them. Because they are actual wood they are really nice and grippy with the added benefit of that if you drop your phone, the wood will absorb some of the shock. It's prevented a few dings for me. Plus they can laser etch anything you want on there...
josephpalozzi said:
I've purchased two Toast skins now and I really like them. Because they are actual wood they are really nice and grippy with the added benefit of that if you drop your phone, the wood will absorb some of the shock. It's prevented a few dings for me. Plus they can laser etch anything you want on there...
Click to expand...
Click to collapse
I've had Toast on phones and laptops. Great products although I prefer them on non-phone devices because it's impossible to put a case over top of it and sometimes you just need heavy duty protection.
grippy case
Hi
I got this within 10 days of ordering - very cheap - but it really adds grip and hardly any bulk
https://www.aliexpress.com/item/Bla...nti-slip-soft-case-cover-for/32774241635.html
Pictures on the site are accurate
Jools
snowdej said:
Hi
I got this within 10 days of ordering - very cheap - but it really adds grip and hardly any bulk
https://www.aliexpress.com/item/Bla...nti-slip-soft-case-cover-for/32774241635.html
Pictures on the site are accurate
Jools
Click to expand...
Click to collapse
Looks good. Could you post some actual real life photos with the phone in it?
kEvinErd said:
Looks good. Could you post some actual real life photos with the phone in it?
Click to expand...
Click to collapse
Hi
https://goo.gl/photos/H2qcY2ECW1AcxEfEA
I have a best skins ever fitted with the glossy screen and matte body.
Also I have a qi receiver. You can see the USB port blocked by it
The buttons are cut outs so are quite recessed. I had a spigen case on just before that covers the buttons
This case is much less bulky than the spigen
The headphone port is possibly slightly wrong. If you have a headphone socket with a bulky top it might struggle. This is being picky though and I could just get a scalpel to it to increase the hole a mm
Jools
devilsadidas said:
I wish that their was an antigravity case for the pixel... I can't stand mounts and would love to just stick my phone to my instrument panel
Click to expand...
Click to collapse
There is the anitgravity space:https://megatinycorp.com/products/anti-gravity-space
This basically just sticks on to any case
Alright so I ordered this clear flexicase ages ago and it has arrived (finally). I wanted to do an unboxing and review. Let every (potential) buyer know my experience so I made this little video, my results and experiences may not be yours but overall the case feels good in the hand, any way. Here is the video:
https://youtu.be/8T3lRl1QKLA
Go ahead and like, comment, subscribe because I got more content, more cases and some comparisons. Also come back here and let me know everyone else's experiences and thoughts.
More content coming your way:
Spigen unboxing and review
Folio cases, wallet/credit card cases
Tempered glass review and application process
Rhino shield unboxing and review
More Orzly cases (of course) and
Some miscellaneous generic cases reviews and comparisons...
...So stay tuned
P.S. I unintentionally jacked @DarkExistence's thread so he'll probably be in here purposely talking about off topic jargon to get back at me, it's cool cool
Quick update on Spigen cases
So Spigen tweeted this pic, and said later on in July. I mean, we're already half way through but.. ok. But I can't even preorder this so there's that. I'll keep updating
BoiBundy said:
So Spigen tweeted this pic, and said later on in July. I mean, we're already half way through but.. ok. But I can't even preorder this so there's that. I'll keep updating
Click to expand...
Click to collapse
I wish Spigen would release a hybrid case for OP5 like they did for the Nexus 6. A clear hard plastic back with solid color TPU edges. It was great because the case never discolored like these stupid clear TPU cases we get today.
biglilsteve said:
I wish Spigen would release a hybrid case for OP5 like they did for the Nexus 6. A clear hard plastic back with solid color TPU edges. It was great because the case never discolored like these stupid clear TPU cases we get today.
Click to expand...
Click to collapse
I mean it's still early in the OnePlus 5 lifespan, that's why it's like tryna pull teeth to find a good case. Hopefully tho we see some good cases. I actually have that one you're talking about for the N6 it's a two part case, with the solid colored tpu and plastic that slides over it I accidentally snapped a piece of the plastic tryna take it off and now it doesn't fit properly
BoiBundy said:
I mean it's still early in the OnePlus 5 lifespan, that's why it's like tryna pull teeth to find a good case. Hopefully tho we see some good cases. I actually have that one you're talking about for the N6 it's a two part case, with the solid colored tpu and plastic that slides over it I accidentally snapped a piece of the plastic tryna take it off and now it doesn't fit properly
Click to expand...
Click to collapse
Oh yeah? That surprises me. I kept that case on my N6 for two years and it was solid. I guess you got unlucky.
But yeah I don't have much confidence in that case making its way to OP5 because it never was released for OP3. They only released a version with clear TPU edges which will still discolor.
Sent from my ONEPLUS A5000 using Tapatalk
SInce I was tagged, just wanted to say I had a great experience with my clear flexicase . All ports lined up, alert slider slot is great, bottom ports are perfect.., as you can see in my thread here! Also received my matte black flexicase today and man, it has a soft touch feeling that is just so nice, a nice little rim around the back and a great rim around the camera!
DarkExistence said:
SInce I was tagged, just wanted to say I had a great experience with my clear flexicase . All ports lined up, alert slider slot is great, bottom ports are perfect.., as you can see in my thread here! Also received my matte black flexicase today and man, it has a soft touch feeling that is just so nice, a nice little rim around the back and a great rim around the camera!
Click to expand...
Click to collapse
Yo could you take a photo of the two side by side, cuz I can't find that black one and I wanna see how that clear flexicase is supposed to look
I've got the Clear flexi case and my brother has one of the solid colour flexi cases. They are really solid case and can't go that wrong with it. Just got my Orzly wallet case and it seems like they are just using the flexi case as the holder in the wallet which is a great thing!
BoiBundy said:
Yo could you take a photo of the two side by side, cuz I can't find that black one and I wanna see how that clear flexicase is supposed to look
Click to expand...
Click to collapse
Hey man,
Yeah sure will do when I have both of them in hand again in a few days
I prefer the coloured flexicases atm, they feel great, have great camera protection and a really nice screen lip