Boot Loop Problem on Chuwi H9 Air - Android Q&A, Help & Troubleshooting

Dear Friends
I tried to root my Chuwi H9 Air tablet by flashing with TWRP .After flashing I had Orange State and TWRP interface not get any command neither from touch nor from buttons.Now device not get any command from buttons and contiously booting each time TWRP interface appear for a short time then go booting again.I tried flash back again by Stock recovery but it did not go through.
Any one has solution for this device?
Thanks in advance.

Same

Related

One Plus one 64GB Stucked on boot logo, not booting into recovery, flashed stock rom.

Hi XDA Users,
I m feeling very helpless so i thought to write here cause every solution is here.
I am user of One Plus One (64GB variant). while normal usage i restarted my phone but it stuck on boot logo. i tried to boot into recovery mode by pressing Volume down + Power key but phone is not booting into recovery mode. i unlocked bootloader and tried by flashing TWRP but failed to boot into recovery. i flashed stock rom but situation is same. i also tried by flashing ColorOS then stock recovery.
Noting is working at least phone should boot with TWRP (twrp-2.7.0.0-bacon.img or twrp-3.2.1-0-bacon.img)
Phone is booting in preloader and fastboot mode only.
stock rom tried (cm-11.0-XNPH05Q-bacon-signed-fastboot and cm-13.1-ZNH2KAS1KN-bacon-signed-fastboot)
Everything is Failed.:crying::crying::crying:
Any help would be really appreciated.
rochak9411 said:
Hi XDA Users,
I m feeling very helpless so i thought to write here cause every solution is here.
I am user of One Plus One (64GB variant). while normal usage i restarted my phone but it stuck on boot logo. i tried to boot into recovery mode by pressing Volume down + Power key but phone is not booting into recovery mode. i unlocked bootloader and tried by flashing TWRP but failed to boot into recovery. i flashed stock rom but situation is same. i also tried by flashing ColorOS then stock recovery.
Noting is working at least phone should boot with TWRP (twrp-2.7.0.0-bacon.img or twrp-3.2.1-0-bacon.img)
Phone is booting in preloader and fastboot mode only.
stock rom tried (cm-11.0-XNPH05Q-bacon-signed-fastboot and cm-13.1-ZNH2KAS1KN-bacon-signed-fastboot)
Everything is Failed.:crying::crying::crying:
Any help would be really appreciated.
Click to expand...
Click to collapse
Try this tips
https://www.youtube.com/watch?v=Sm-lWKk8uFs
Good Luck
Not Working
Dear,
Teddy Lo
Thanks for your reply But i have tried this method. flashing is done but phone is still in same state (boot logo).
I am thinking there may be any hardware issue. I have sent this handset to one of the best repair center in india. just wating for their reply.

Acer liquid z530 - flash twrp, bootloop

Hi, I have a problem with my Acer Liquid z530. I unlocked the bootloader and wanted to install twrp. Unfortunately, after this operation the phone got a bootloop and I am not able to enter fastboot. After switching on the phone a logo appears and after a few seconds it resets.
Is there a way to fix the phone?
Do you have a computer, if you don't, I still have a solution

remote:partition table doesn't exist

Hello guys,
I am using Lenovo P2 from long time. Few days before phone all of a sudden restarted and stuck on boot logo (Lenovo logo)
Now when i am trying to flashing stock rom using fastboot method its giving me an error "remoteartition table doesn't exist"
Can i know what is the meaning of this error and how to get rid of it.
I am able to go to bootloader but not able to go to stock or twrp recovery. Tied going into recovery many times but either black screen appears or boot image appears.
Please help me to save my phone
Thank you in advance

[q] mi a1 freezing after some time and restarting

HI ALL,
RECENTLY I WAS TRYING TO INSTALL TWRP FOR TISSOT. BUT I COULD NOT FIND RECOVERY PARTITION ON MY DEVICE. SO I TRIED "FASTBOOT FLASH PARTITION gpt_both0.bin". BUT AFTER REBOOTING MY DEVICE GONE INTO EDL MODE. THEN I TRIED TO FLASH THE ORIGINAL TISSOT 8.0 BY MI FLASH TOOL.
AFTER REBOOTING ITS SHOWING ANDROID ONE LOGO THEN AFTER FEW SECONDS IT'S FREEZING AND RESTART. I TRIED TO FLASH WITH ORIGINAL 7.0 ROM AND 8.0 ALSO WITH 8.1 ROM MANY TIMES. BUT EVERYTIME AFTER FLASHING IT'S BOOTING AND GETTING FREEZES AND RESTARTS.
(IT'S WORKING FINE BOTH IN FASTBOOT MODE AND RECOVERY MODE).
NOW GUYS PLEASE HELP ME TO FIX MY DEVICES IF ANYONE KNOWS ABOUT THIS ISSUE. I DON'T WANT TO GO TO SERVICE CENTRE.
PLEASE GUYS.​
Thanks a lot XDA
pnath said:
hi all,
recently i was trying to install twrp for tissot. But i could not find recovery partition on my device. So i tried "fastboot flash partition gpt_both0.bin". But after rebooting my device gone into edl mode. Then i tried to flash the original tissot 8.0 by mi flash tool.
After rebooting its showing android one logo then after few seconds it's freezing and restart. I tried to flash with original 7.0 rom and 8.0 also with 8.1 rom many times. But everytime after flashing it's booting and getting freezes and restarts.
(it's working fine both in fastboot mode and recovery mode).
Now guys please help me to fix my devices if anyone knows about this issue. I don't want to go to service centre.
Please guys.​
Click to expand...
Click to collapse
thanks a lot xda, i finally recovered my device fully. And got latest android 9.0 pie update too. Special thanks to https://forum.xda-developers.com/crossdevice-dev/android-one-secondgeneration-general/guide-fix-devices-imeis-signal-t3589276
Thanks a lot guys.

Bootloop/Brick and recovery mode or adb not working

I have a swipe elite max (android 6.0) which got stuck while flashing a custom rom.
The phone is stuck at a bootloop at the logo screen and not going beyond it.
I am not able to access the custom recovery and adb fastboot is also not able to recognise the device for flashing the original firmware.
I don't know how to get past this screen.

Categories

Resources