I've got a Bose Quietcomfort 35 bluetooth headphone. It reportedly supports SBC and AAC codecs.
Pocophone reportedly supports both of those codecs, but it only streams using SBC.
Even if I go to developers options and manually choose AAC, this options doesn't stick. If I go to another app and come back, it's back to SBC.
Can anyone help me solving this? I'd like to stream using AAC.
Same here
tariq2kn said:
Same here
Click to expand...
Click to collapse
Yup, same problem here. The only audio codec I can use is SBC. I'm using the Bluedio TM bluetooth 5.0 headphones.
In my case, I think the problem is with the Bose headphones
I can stream audio to my Yamaha home theater and use aptx
I solved the problem by renaming the headphones to have the name "Bose Quietcomfort 35" it it. E.g. : "Bose Quietcomfort 35 AA"
Related
Hello guys,
I have a Note 5 and want to listen to music via my Bose QC 35 II. As these headphones only support SBC, which is quite basic and the slightly better AAC codec, no Aptx streaming is possible. It is sad that the good sounding aptx is not available, so i wanted to get the best out of it and try to listen with the aac codec. Unfortunately, it is only possible to manually change the bluetooth codec in Android Oreo. Is there a way be it an additional app or similar actions to manipulate the bluetooth audio codec even in Android Nougat?
Thanks in advance*
Hello comunity have anyone triyed with the m20 pro using the codex aptx-ll ? I only watch videos of YouTubeMusic and YouTube in high quality and researching i see that this service compress the music using AAC. But i read that aptx-hd and LDAC are far better codec with more bandwitdh. I see a pair of Bluetooth headphones that support aptx and aptx-ll but i dont know if the mate support this or only aptx and aptx hd.
Should i instend look for a pair of headphones that support AAC?
redfox1985 said:
Hello comunity have anyone triyed with the m20 pro using the codex aptx-ll ? I only watch videos of YouTubeMusic and YouTube in high quality and researching i see that this service compress the music using AAC. But i read that aptx-hd and LDAC are far better codec with more bandwitdh. I see a pair of Bluetooth headphones that support aptx and aptx-ll but i dont know if the mate support this or only aptx and aptx hd.
Should i instend look for a pair of headphones that support AAC?
Click to expand...
Click to collapse
Mate 20 does support aptx Low latency
cnutt1 said:
Mate 20 does support aptx Low latency
Click to expand...
Click to collapse
Thank you pal! I procced with my purchase
Noup! I purchase the soundpeats Q12 in amazon these support aptx-ll but the huawei mate20 pro only support aptx and aptx-HD
redfox1985 said:
Noup! I purchase the soundpeats Q12 in amazon these support aptx-ll but the huawei mate20 pro only support aptx and aptx-HD
Click to expand...
Click to collapse
Are you noticing any delay?if it's just in YouTube it's a known bug
cnutt1 said:
Are you noticing any delay?if it's just in YouTube it's a known bug
Click to expand...
Click to collapse
Not really i have streaming high quality audio from spotiy and from YouTube havent notice any delay
cnutt1 said:
Mate 20 does support aptx Low latency
Click to expand...
Click to collapse
Not true according to the official www.aptx.com website.
Also I own a Mate 20 Pro, and for aptx there are only the basic "aptx" and the "aptx hd" options on Developer Options' bluetooth codec settings menu.
Are you 100% sure the Mate 20 Pro supports the aptx-LL codec specifically? How can you tell?
As for bluetooth audio lag.. lots of streaming apps and media players artificially compensate for that, i.e., they delay the video a split second so that the laggy audio catches up and everything is sync for the user to watch.
But realtime audio does suffer from lag. App sounds, or games, etc. All cases when the app or system cannot predict or tell in advance when and which audio is supposed to be played. I have never tried aptx-LL though and that seems to make the realtime experience almost completely lag-free, and looks like a really nice alternative.
But as I said, I do not believe the Mate 20 Pro supports it. If it does please let me know as I am very interested in this.
I have jabras 65t and jaybird x3. They both connect with aac and sbc. When they connect with the default aac, both have a half sec lag. When I got to developer string I can manually change the setting to sbc. When I do that the lag goes away. The only issue is the phone doesn't keep the setting. It will default back to acc when you use the earphones again. Just to prove I have a cheap pair of insignia hear phones with connect vis sbc and there is no lag.
It seems to me that the Earphones dictate which codec will be used. You can see this in developer settings where it will highlight which of the several available code s to choose from such as aas, and sbc. I would I am actually looking for a wireless headphones that do t use @C And use aptx. It's hard to check the settings on Amazon or any other site.
---------- Post added at 02:16 AM ---------- Previous post was at 02:16 AM ----------
have jabras 65t and jaybird x3. They both connect with aac and sbc. When they connect with the default aac, both have a half sec lag. When I got to developer string I can manually change the setting to sbc. When I do that the lag goes away. The only issue is the phone doesn't keep the setting. It will default back to acc when you use the earphones again. Just to prove I have a cheap pair of insignia hear phones with connect vis sbc and there is no lag.
It seems to me that the Earphones dictate which codec will be used. You can see this in developer settings where it will highlight which of the several available code s to choose from such as aas, and sbc. I would I am actually looking for a wireless headphones that do t use @C And use aptx. It's hard to check the settings on Amazon or any other site.
Jmar72 said:
I have jabras 65t and jaybird x3. They both connect with aac and sbc. When they connect with the default aac, both have a half sec lag. When I got to developer string I can manually change the setting to sbc. When I do that the lag goes away. The only issue is the phone doesn't keep the setting. It will default back to acc when you use the earphones again. Just to prove I have a cheap pair of insignia hear phones with connect vis sbc and there is no lag.
It seems to me that the Earphones dictate which codec will be used. You can see this in developer settings where it will highlight which of the several available code s to choose from such as aas, and sbc. I would I am actually looking for a wireless headphones that do t use @C And use aptx. It's hard to check the settings on Amazon or any other site.
---------- Post added at 02:16 AM ---------- Previous post was at 02:16 AM ----------
have jabras 65t and jaybird x3. They both connect with aac and sbc. When they connect with the default aac, both have a half sec lag. When I got to developer string I can manually change the setting to sbc. When I do that the lag goes away. The only issue is the phone doesn't keep the setting. It will default back to acc when you use the earphones again. Just to prove I have a cheap pair of insignia hear phones with connect vis sbc and there is no lag.
It seems to me that the Earphones dictate which codec will be used. You can see this in developer settings where it will highlight which of the several available code s to choose from such as aas, and sbc. I would I am actually looking for a wireless headphones that do t use @C And use aptx. It's hard to check the settings on Amazon or any other site.
Click to expand...
Click to collapse
Well i have purchase from amazon the soundpeats Q12 and those support aptx and aptx-ll
I streaming spotify in very high quality and they sound perfect the mate 20 pro set them in aptx. In youtube and instagram livestrams i dont see any lag. Maybe beacuse aptx has more bandwith than ACC the pair of headphones cost me $30
I m using Funcl AI earbuds and It supports APTX .
Same problem.
I contacted the Huawei Service. No answer were given. They will e-mail me later
Hi,
I was wondering if anyone has managed to get Audio Passthrough working. So if you've got a movie file which has DTS or Dolby Digital sound, and you connect your phone with a HDMI dongle to your Audio receiver which can process DTS or Dolby Digital, to actually get surround sound out of it.
I've tried VLC and MX player, none worked. If I connect the exact same equipment to my laptop, it does work. So it must be either the video apps or the phone. I've tried multiple settings in the apps (of course I've enabled audio passthrough), didn't change anything.
Any help on this?
Thanks!
Spir4 said:
Hi,
I was wondering if anyone has managed to get Audio Passthrough working. So if you've got a movie file which has DTS or Dolby Digital sound, and you connect your phone with a HDMI dongle to your Audio receiver which can process DTS or Dolby Digital, to actually get surround sound out of it.
I've tried VLC and MX player, none worked. If I connect the exact same equipment to my laptop, it does work. So it must be either the video apps or the phone. I've tried multiple settings in the apps (of course I've enabled audio passthrough), didn't change anything.
Any help on this?
Thanks!
Click to expand...
Click to collapse
Hello, i do it with a Encore mDSD USB DAC and some specific software of the play store; i extract DTS files, and read with sony music software, listening on a WH-1000XM2 Sony
Pascal536 said:
Hello, i do it with a Encore mDSD USB DAC and some specific software of the play store; i extract DTS files, and read with sony music software, listening on a WH-1000XM2 Sony
Click to expand...
Click to collapse
Alright but that's no surround sound. You're using a DAC which outputs stereo sound to a 3.5mm jack and a stereo headphones ...
I asking same question, do you find the solution now? I want to use smartphone to do audio passthrough to amplifier
Charley L said:
I asking same question, do you find the solution now? I want to use smartphone to do audio passthrough to amplifier
Click to expand...
Click to collapse
Nope never found a proper working solution, I just gave up
I'm interested in buying the Tab S6 and using it with a bluetooth DAC. Probably going to pair it up with a ES100 (MK2), Fiio BTR3 or Shanling UP2/4 DAC.
I was just wondering which bluetooth audio codecs are supported by the S6. Could someone enlighten me on this as Samsung doesn't list the specifics on this?
Thanks in advance.
I can say that LDAC is OK wih BTR3.
Today I used aptx low latency with my Fiio BT receiver.
Thanks for the input. So at least aptx ll and ldac are supported. That should be good enough for my needs.
Ok I got some time, lets go through every protocol with the BTR3 and the original control app:
I get the pink flashing APTX and light blue AAC accepted.
No luck with HWA, LDAC and APTX HD sadly, the FIIO app just states SBC instead. And SBC really sounds like crap.
Not sure about aptx LL, this always activates the regular APTX which then gets connected.
Hmm strange because civciv seems to be getting LDAC running with the BTR3.
LDAC is definitely supported. Just be sure to enable it in Fiio BTR3 submenu at system BT settings. The LED turns to white while listening to music.
Thanks for the update. Now to make up my mind about which bt dac to buy .
nurps said:
Today I used aptx low latency with my Fiio BT receiver.
Click to expand...
Click to collapse
I have a FiiO BTA10 Bluetooth adapter for ATH-M50x headphones. It's listed as supporting AAC, SBC, aptX, and aptX LL.
On my Tab S6, when I go to Settings -> Developer Options -> Bluetooth Audio Coded, I see it's connected using aptX. I don't see an aptX LL option.
So my question is, how did you get aptX LL to work?
Azra4 said:
I have a FiiO BTA10 Bluetooth adapter for ATH-M50x headphones. It's listed as supporting AAC, SBC, aptX, and aptX LL.
On my Tab S6, when I go to Settings -> Developer Options -> Bluetooth Audio Coded, I see it's connected using aptX. I don't see an aptX LL option.
So my question is, how did you get aptX LL to work?
Click to expand...
Click to collapse
I was able to set it up in the FiiO Music App.
has anyone else noticed that bluetooth quality is terrible when the phone uses a bluetooth codec other than SBC or LDAC? I've witnessed it with my Grado headphones as they only have SBC or aptX HD and the phone picks aptX HD as it would be the higher quality codec but sounds bad for moments and then it's like you go from mono to stereo in that sound quality improves for a few seconds and then goes to trash again. This also happens with AAC on a friend's car. Forcing the phone to SBC in developer settings makes it sound good, but it is cumbersome to always have to go to dev settings to change from the codec it picked to SBC, few devices have LDAC, and anyways why ship the other codecs if you'll have them broken
I tried sbc on my wf xm4 and all sound good
Mrxyzl said:
I tried sbc on my wf xm4 and all sound good
Click to expand...
Click to collapse
The point is that SBC sounds good and so does LDAC but the rest sound like ****.
I tried AAC with my galaxy buds pro and the high frequencies get a little distorted, as if it had a lower volume
AAC on Google Home (to which it defaults as it only supports SBC and AAC) also exhibits this issue.
If you are on android 13 64.1.A.0.891 than flash it back to 64.0.A.11.31. I had the same issues my headsec was popping and crackling my car unit (sony MEX unit ) was losing connection noisy and stattering playback