[BIP] patial disconnection issues // loss of functions - Amazfit

My BIP irrecoverably disconnects from my iPhone every 24 - 36 hours. Strangely app notifications still work. Only way of reconnecting it to the MiFit app for syncing is to unpair, factory reset, and repair - with data loss every time.
Any ideas?
The Mi Fit log shows the following issues:
13341|1545138664421|3|BLE|-[BLETask localRunTask]- 0115 -|orBand.wait.cp.noitfy.auth -> (null)
13342|1545138664421|3|BLE|-[BandProConnectLogic waitSendCiperDataReturn]- 0295 -|wait send cipher failed.
13343|1545138664421|3|BLE|-[BandProConnectLogic startAuth]- 0177 -|等待加密数据返回失败,
13344|1545138664421|3|BLE|-[BandLogic BandConnectLogic:ConnectFailWithError:]- 1367 -|XXXX connect binded band failed with error: 54 , current oper type: 2
13345|1545138675633|3|BLECORE|-[HMBLECoreManager centralManager:didDisconnectPeripheral:error:]- 0281 -|
bluetooth did disconnect <CBPeripheral: 0x1d0315d50, identifier = 36E113F8-26F5-27BF-9223-89DEBC4BFA5D, name = Amazfit Bip Watch, state = disconnected> with :Error Domain=CBErrorDomain Code=6 "The connection has timed out unexpectedly." UserInfo={NSLocalizedDescription=The connection has timed out unexpectedly.}
13346|1545138675634|3|BLE|-[BandLogic deviceConnectDidDisconnected:withError:]- 0319 -|did disconnect: <CBPeripheral: 0x1d0315d50, identifier = 36E113F8-26F5-27BF-9223-89DEBC4BFA5D, name = Amazfit Bip Watch, state = disconnected> Error Domain=CBErrorDomain Code=6 "The connection has timed out unexpectedly." UserInfo={NSLocalizedDescription=The connection has timed out unexpectedly.}
13347|1545138695588|3|BLE|-[BandConnectLogic connectToPeripheral:]- 0638 -|connect <CBPeripheral: 0x1d0315d50, identifier = 36E113F8-26F5-27BF-9223-89DEBC4BFA5D, name = Amazfit Bip Watch, state = connecting> error Error Domain=HMBLEErrorDomain Code=5 "Time out" UserInfo={NSLocalizedDescription=Time out}
13348|1545138695588|3|BLE|-[BandConnectLogic connectToPeripheral:]- 0641 -|base connect failed.
13349|1545138695588|3|BLE|-[BandLogic BandConnectLogic:ConnectFailWithError:]- 1367 -|XXXX connect binded band failed with error: 53 , current oper type: 2
13350|1545138695590|3|BLECORE|-[HMBLECoreManager centralManager:didConnectPeripheral:]- 0263 -|
bluetooth did connected: Amazfit Bip Watch (36E113F8-26F5-27BF-9223-89DEBC4BFA5D)
13351|1545138697527|3|BLE|-[BandProConnectLogic readConnectIntervalParameter]- 0483 -|Read Connect Interval: min:24,max:24,latency:0,timeout:72
13352|1545138697940|3|BLE|-[BLEOperatingRoom waitNotify:]- 0293 -|等待任务 wait.cp.noitfy.auth 失败(<100307>) 或者超时(5000).
13353|1545138697940|3|BLE|-[BLEDeviceOperatingRoom doOPWait:]- 0287 -|task failed: [MF]-orBand-wait.cp.noitfy.auth-5(s)-(null), -, [SD]-
(null)
FEE1
00000009-0000-3512-2118-0009AF100700-notifying=1
(null)
{
kNotifyCompareType = checkResult;
}
, [RD]-
13354|1545138697940|3|BLE|-[BLETask localRunTask]- 0115 -|orBand.wait.cp.noitfy.auth -> (null)
13355|1545138697940|3|BLE|-[BandProConnectLogic waitSendCiperDataReturn]- 0295 -|wait send cipher failed.
13356|1545138697940|3|BLE|-[BandProConnectLogic startAuth]- 0177 -|等待加密数据返回失败,
13357|1545138697940|3|BLE|-[BandLogic BandConnectLogic:ConnectFailWithError:]- 1367 -|XXXX connect binded band failed with error: 54 , current oper type: 2
13358|1545138770014|3|public|+[HMBGFetchWeatherTask startFetchingAndWriteWeatherWithCompletion:]- 0018 -|starting weather data requesting.....

Related

Abnormal GlEngine stop during the GPS lock

Hi Experts,
I have a following problem with glgps during the tests on the phone with MTK6577 platform with 4.0.4 ICS (Broadcom 4751 A2 as onboard GPS chip) :
When I start any navigation application I see the glgps crash with following messages in logs :
"
4:09:15.435 $651083I Write NVRAM Almanac SBAS 18
04:09:15.435 $651083I Write NVRAM Almanac SBAS 19
04:09:15.435 $651083N LTO_BAD(from Broadcast) { }
04:09:15.435 $651083N LTO_BAD(from HighResid) { }
04:09:15.436 Closed NVRAM file
04:09:15.436 $651084I GlChovyCtrl::SaveNvRamAndRtc(4979 225321 8978432, Invalid)
04:09:15.436 $651084I <GlMeasEng::SetNvmem>[snr=-1,Fail=F][bBinCtr=F/F][bBinDir=+/+]
04:09:15.437 $651085I NVRAM write complete (Clear 0x50000)
04:09:15.437 $651085I GlChovyCtrl::AsicToStandby()
04:09:15.437 $651085I PMM::me -LpEntry -sv(0>=7 -142dBm) && -pe
04:09:15.448 $651096I GlPosEng::AsicStopped()
04:09:15.448 $651096C ReloadComponents() PSF={DERATE_TIME 0x0 RECOVER_JOBS 0x0} Need={Reset 1 Restart 1} Abort 0
04:09:15.448 $651096C Abnormal GlEngine stop. Initial time estimate was bad
"
I searched anywhere but ... failed.
Have you any ideas ?
How to troubleshoot this issue ?
Is it the any misconfiguration in gpsconfig.xml or glgps daemon bug ?
I can send any diagnostics and configs
Thanks a lot for your response.
I have Just Diagnosed the Cause but not successful with any solid solution so far.
Similar problem i have with my MTK6575 smartphone (QMobile A6) , Problem is due to InCorrect calculation of Time by GlEngine when it is using NVRAM as timesource, GlEngine is neither using NTP Servers nor Cell Towers as timing source, it is only using either NVRAM time (Calculated) by default or GPS time (Download),
now if it using NVRAM as time source,
14:25:35.464 $081969I FixStatus: TimeSource 1
14:25:35.464 --GlPe_FixStatus::SetSIGMeasuement Setting utc time to 2012 (yr) 11 (mo) 25 (dt) 9 (hr) 5 (mn) 14 (sec) 565 (ms) 0 (us) 1000000 (prec)
It mostly Stops Abnormally. But on the next Startup, it resets it time to year 2007, and use GPS provided time as source.
21:56:02.218 $134952I FixStatus: TimeSource 0
21:56:02.218 --GlPe_FixStatus::SetSIGMeasuement Setting utc time to 2007 (yr) 3 (mo) 31 (dt) 23 (hr) 59 (mn) 58 (sec) 79 (ms) 0 (us) -1 (prec)
in that case it takes a little time but do not shutdown and using Supl Server it could easily locks and remain Locked but from next time it again use time stored in NVRAM as stored, which could again give similar result.
I did'nt see any configuration in GPSCONFIG.XML to use GPS satellites as default time source and ignore NVRAM stored time.
so the GlEngine (/system/bin/glgps) need modifications.
i have different GlEngines with no luck so far, if any one could understand the cause, plz Advise the Solution
Plz also see my article on XDA.
http://forum.xda-developers.com/showthread.php?p=35826094#post35826094

Raspberry GPIO email script

Hi,
I made a simple script that sends me an email when the raspberry detects a rising signal on a gpio input
Between the switch and the gpio i have mounted a resistor (1K ohm all connections are soldered) to prevent the gpio from flaoting
Script works well but when it is up and running for about 15min the RPI detects a rising signal?
Can someone help me out?
greets kawa
Script:
--------------------------------------------------------------------------
import smtplib
import time
def sendemail(from_addr, to_addr_list, cc_addr_list,
subject, message,
login, password,
smtpserver='smtp.gmail.com:587'):
header = 'From: %s\n' % from_addr
header += 'To: %s\n' % ','.join(to_addr_list)
header += 'Cc: %s\n' % ','.join(cc_addr_list)
header += 'Subject: %s\n\n' % subject
message = header + message
server = smtplib.SMTP(smtpserver)
server.starttls()
server.login(login,password)
problems = server.sendmail(from_addr, to_addr_list, message)
server.quit()
import RPi.GPIO as GPIO
GPIO.setmode(GPIO.BCM)
GPIO.setup(23, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(24, GPIO.OUT, initial=False) #Siren pin setup
try:
GPIO.wait_for_edge(23, GPIO.RISING)
print "\nRising edge ALARM"
sendemail(from_addr = '@gmail.com',
to_addr_list = ['@gmail.coml'],
cc_addr_list = [''],
subject = 'ALARM',
message = 'alarm',
login = '@gmail.com',
password = '****')
GPIutput(24, True)
time.sleep(5)
except KeyboardInterrupt:
GPIO.cleanup() # clean up GPIO on CTRL+C exit
GPIO.cleanup() # clean up GPIO on normal exit

Archos 101 g9 8gb & Huawei modem E173u-1[No driver found]

Hi, I am having issues with a Huawei modem E173u-1 on my tablet Archos 101 g9 8gb
driver not found.
Can you help me, pls?
USB_ModeSwitch log from Wed Apr 09 17:50:44 PKT 2014
Raw args from udev: 1-1/1-1:1.0
Using top device dir /sys/bus/usb/devices/1-1
----------------
USB values from sysfs:
manufacturer HUAWEI
product HUAWEI Mobile
serial
----------------
bNumConfigurations is 1 - don't check for active configuration
SCSI attributes not needed, moving on
checking config: /data/data/de.draisberghof.pppwidget/app_tmp/12d1.14fe
! matched. Reading config data
devList 1:
config: TargetVendor set to 12d1
config: TargetProduct set to 1506
Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1
Logger is: /system/bin/log
Command to be run:
usb_modeswitch -I -W -D -s 20 -u -1 -b 1 -g 2 -v 12d1 -p 14fe -f $cB
Verbose debug output of usb_modeswitch and libusb follows
(Note that some USB errors are to be expected in the process)
--------------------------------
Reading long config from command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.2.4 (C) Josua Dietze 2012
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x14fe
TargetVendor= 0x12d1
TargetProduct= 0x1506
TargetClass= not set
TargetProductList=""
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
InquireDevice disabled
Success check enabled, max. wait time 20 seconds
System integration mode enabled
Use given bus/device number: 001/002 ...
Looking for default devices ...
bus/device number matched
searching devices, found USB ID 12d1:14fe
found matching vendor ID
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Skipping the check for the current configuration
Using interface number 0
Using endpoints 0x01 (out) and 0x81 (in)
USB description data (for identification)
-------------------------
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Resetting response endpoint 0x81
Could not reset endpoint (probably harmless): -34
Resetting message endpoint 0x01
Could not reset endpoint (probably harmless): -6
Device is gone, skipping any further commands
Bus/dev search active, referring success check to wrapper. Bye.
ok:busdev
--------------------------------
(end of usb_modeswitch output)
Checking success of mode switch for max. 20 seconds ...
Waiting for device file system (1 sec.) ...
Waiting for device file system (2 sec.) ...
Waiting for device file system (3 sec.) ...
Waiting for device file system (4 sec.) ...
Waiting for device file system (5 sec.) ...
Waiting for device file system (6 sec.) ...
Waiting for device file system (7 sec.) ...
Reading attributes ...
Mode switch has completed
Mode switching was successful, found 12d1:1506 (HUAWEI: HUAWEI Mobile)
Device class of first interface is ff
Now checking for bound driver ...
No driver has bound to interface 0 yet
Module loader is /sbin/insmod
Trying to find and install main driver module "option"
Trying to find module "option"
Loading support module /lib/modules/usb_wwan.ko
Error: insmod: cannot insert '/lib/modules/usb_wwan.ko': Invalid module format (-1): Exec
format error
Loading main driver module "option"
Error: insmod: cannot insert '/lib/modules/option.ko': Invalid module format (-1): Exec
format error
Falling back to "usbserial"
Module "usb_serial" not found, can't do more here
Driver binding seems to have failed
All done, exiting
please answer!!!
i'm solved the problem by replacing the nucleus

[Q] S3 Neo+ I9301, KitKat possibly crashing the phone?

Hi, ive recently bought a phone I9301 (the one with 1.5gb RAM and 4.4.2 kitkat from 12th August)
but the main problem is that the phone happens to restart itself
it does it very often when (i think) something wakes it up from the Deep Sleep (after about 10minutes of doing nothing) like:
- unlocking the phone
- setting the alarm
- receiving a call
sometimes it restarts automatically when i'm not using it
ive checked the android there are no Kernel panic logs left, no crash logs at all
tried to crash the phone while having it connected to the Catlog via USB, but it doesnt go Deep Sleep while charging (so the alarm and calls worked) but managed to crash it once
thats what the CatLog left me with
Code:
10-04 13:31:30.145: E/SMD(225): DCD ON
10-04 13:31:30.345: E/adsprpc(254): vendor/qcom/proprietary/adsprpc/src/listener_android.c:124:listener protocol failure -1
10-04 13:31:30.355: E/adsprpc(254): vendor/qcom/proprietary/adsprpc/src/listener_android.c:128::error: -1: 0 == (nErr = __QAIC_HEADER(adsp_listener_next_invoke)( ctx, nErr, 0, 0, &ctx, &handle, &sc, bufs->inbufs, inBufsAllocated, bufs->inbufLenReqs, MAX_BUFS, bufs->outbufLenReqs, MAX_BUFS))
10-04 13:31:30.365: E/adsprpc(254): vendor/qcom/proprietary/adsprpc/src/listener_android.c:187:listener thread exiting with code -1
10-04 13:31:30.365: E/adsprpc(254): vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:215::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
10-04 13:31:30.375: E/adsprpc(254): vendor/qcom/proprietary/adsprpc/src/listener_android.c:189:listener thread failed to cleanly shutdown. This is ok durring process exit.
10-04 13:31:30.375: E/adsprpc(254): vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:215::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
10-04 13:31:30.375: E/adsprpc(254): vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:215::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
10-04 13:31:30.375: E/adsprpc(254): vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:215::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
10-04 13:31:30.385: E/adsprpc(254): vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:215::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
: E/(): Device disconnected
(look at the bottom), i guess nothing special, however didnt find time to check what the remotectl_open function does in detail
its been to the Warranty 2 times, first time they 're' flashed the firmware, but the problem remained, tried disabling tons of built-in apps, hard reset, nothing works
second time they said theres nothing to do and all i have to do is just wait for the release of firmware update,
any ideas whats wrong with the phone?

Bricked Huawei HiSilicon phones - Honor P6, Mate, 4C etc... way to unbrick???

Hi people.
I have new bricked Huawei Honor 4c with HiSilicon Kirin 620 octacore (Hi6620) Hardly bricked.
I`ve unlocked bootloader and custom recovery used to flash it with my own update.zip from other phone (with LTE support). At the end of flashing - it turned off and bricked.
BUT! After connecting to PC via USB it flashes GREEN and RED leds a few times and after windows determines it as a device with USB\VID_12D1&PID_3609&REV_0000 and named as 䕇䕎䥎 ㄰㌲㔴㜶㤸 .
It is Huawei`s VID. And after a lot of search I found a driver for it - and device became HUAWEI USB-COM 1.0. But nothing else.
No flash utility, nothing. HiSilicon-IDT for K3 processor doesn`t work.
After another searches I found very similar device - it`s named HiKey board. Based on Hisilicon Kirin processor too https://www.96boards.org/.
This board is base around the HiSilicon Kirin 6220 eight-core ARM Cortex-A53 64-bit SoC running at 1.2GHz and delivering over 10,000 Dhrystone VAX MIPS total performance. The SoC also delivers high performance 3D graphics support with its ARM Mali 450-MP4 GPU.
1GB 800MHz LPDDR3 DRAM, 4GB eMMC Flash Storage and the standard 96Boards microSD v3.0 socket provide high performance. Flexible storage options and connectivity are available through 802.11a/b/g/n WiFi, Bluetooth 4.0 LE, three high speed USB 2.0 ports (1 OTG), an HDMI 1.3 1080p video output with audio, and Maker, DSI display and CSI camera interfaces. The board is the standard 96Boards credit-card form factor powered by an 8-18V DC 2A power supply.
Click to expand...
Click to collapse
As we can see - it is very close to ours phone.
It is fully documented and has a lot of spec about proc and other.
And in it`s manual written about recovery procedure after damage of ROM - when device is powered on - it is in "download mode" for 90 seconds - abslolutly like mine phone - after 90 second it turns off from windows.
In short - it is ability to write 2 fastboot images (fastboot1.img and fastboot2.img) in RAM, launch them and using fastboot command flash images to eMMC. They use SERIAL COM PORT to manipulate with device.
It uses utility called "hisi-idt.py" - it is a python script for Linux based machines.
I`ve Installed Linux Mint and try it.
And I`ve some result - first image is going fine and I receive "Done"
But second image is always "Failed". And fastboot command "fastboot devices" do not list any devices.
Viewing binaries from my ROM (Fastboot.img and Fastboot1.img) in HEX - I can see load addresses to ROM are the same as in python script. It is 0xf9800800 and 0x0700000 for both images.
But.... have no success. It looks like I`m close to the goal.
Any ideas?
Noone intersted in?
I`ve found UART Rx Tx points on the motherboard and now I can get some debug info.
I see I can load images into RAM but...
Code:
debug EMMC boot: print init OK
debug EMMC boot: send RST_N .
debug EMMC boot: start eMMC boot......
OnChipRom: fastboot1 Verif sucess !
[BDID]boardid: 745 <7.4.5>
battery ocv is 4141 mv
�����������������������������������������������������壂�{��?O
H�����������w!!I㡡�v�J�ơ�����硾�B����9�F�F�$�/"�0D�c���������f��B���B�f��B�rreset device done.
start enum.
enum done intr
Enum is starting.
usb reset intr
enum done intr
NULL package
NULL package
USB ENUM OK.
init ser device done....
USB:: Err!! Unknown USB setup packet!
NULL package
USB:: Err!! Unknown USB setup packet!
NULL package
USB:: Err!! Unknown USB setup packet!
NULL package
USB:: Err!! Unknown USB setup packet!
NULL package
USB:: Err!! Unknown USB setup packet!
NULL package
uFileAddress=ss=f9800800
start armboot download mode
[BDID]boardid: 745 <7.4.5>
battery 펟v���W�����ʝcn�g������
H�����������w!!I㡡�v�J�ơ�����硾�B����9�F�F�$�/"�0D�c���������f��B���B�f���gc姾����fB�ʔ
thats all for a while
i have same problem pleas tell me if you fix it
michfood said:
Noone intersted in?
I`ve found UART Rx Tx points on the motherboard and now I can get some debug info.
I see I can load images into RAM but...
Code:
debug EMMC boot: print init OK
debug EMMC boot: send RST_N .
debug EMMC boot: start eMMC boot......
OnChipRom: fastboot1 Verif sucess !
[BDID]boardid: 745 <7.4.5>
battery ocv is 4141 mv
�����������������������������������������������������壂�{��?O
H�����������w!!I㡡�v�J�ơ�����硾�B����9�F�F�$�/"�0D�c���������f��B���B�f��B�rreset device done.
start enum.
enum done intr
Enum is starting.
usb reset intr
enum done intr
NULL package
NULL package
USB ENUM OK.
init ser device done....
USB:: Err!! Unknown USB setup packet!
NULL package
USB:: Err!! Unknown USB setup packet!
NULL package
USB:: Err!! Unknown USB setup packet!
NULL package
USB:: Err!! Unknown USB setup packet!
NULL package
USB:: Err!! Unknown USB setup packet!
NULL package
uFileAddress=ss=f9800800
start armboot download mode
[BDID]boardid: 745 <7.4.5>
battery 펟v���W�����ʝcn�g������
H�����������w!!I㡡�v�J�ơ�����硾�B����9�F�F�$�/"�0D�c���������f��B���B�f���gc姾����fB�ʔ
thats all for a while
Click to expand...
Click to collapse
Hello, can you uload somewere the python file to have a look at it? Also the log you have provided to us it's the whole log?
no the log is not full.
it changes UART speed while booting.
script:
Code:
#!/usr/bin/python
#-*- coding: utf-8 -*-
import os
import os.path
import serial, time
import array
import sys, getopt
class bootdownload(object):
'''
Hisilicon boot downloader
>>> downloader = bootdownload()
>>> downloader.download(filename)
'''
# crctab calculated by Mark G. Mendel, Network Systems Corporation
crctable = [
0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0,
]
startframe = {
'hi3716cv200':[0xFE,0x00,0xFF,0x01,0x00,0x00,0x00,0x04,0x00,0x00,0x02,0x01]
}
headframe = {
'hi3716cv200':[0xFE,0x00,0xFF,0x01,0x00,0x00,0x00,0x04,0x00,0x00,0x02,0x01]
}
bootheadaddress = {
'hi3716cv200':0xF9800800
}
bootdownloadaddress = {
'hi3716cv200':0x07000000
}
BOOT_HEAD_LEN = 0x4F00
MAX_DATA_LEN = 0x400
def __init__(self,chiptype,serialport):
try:
self.s = serial.Serial(port=serialport, baudrate=115200, timeout=1)
except serial.serialutil.SerialException:
#no serial connection
self.s = None
print "\nFailed to open serial!", serialport
sys.exit(2)
self.chip = chiptype
def __del__(self):
if self.s != None:
self.s.close()
def calc_crc(self, data, crc=0):
for char in data:
crc = ((crc << 8) | ord(char)) ^ self.crctable[(crc >> 8) & 0xff]
for i in range(0,2):
crc = ((crc << 8) | 0) ^ self.crctable[(crc >> 8) & 0xff]
return crc & 0xffff
def getsize(self, filename):
st = os.stat(filename)
return st.st_size
def sendframe(self, data, loop):
for i in range(1, loop):
self.s.flushOutput()
self.s.write(data)
self.s.flushInput()
try:
ack = self.s.read()
if len(ack) == 1:
if ack == chr(0xaa):
return None
except:
return None
print 'failed'
def sendstartframe(self):
self.s.setTimeout(0.01)
data = array.array('B', self.startframe[self.chip]).tostring()
crc = self.calc_crc(data)
data += chr((crc >> 8)&0xff)
data += chr(crc&0xff)
self.sendframe(data,10000)
def sendheadframe(self,length,address):
self.s.setTimeout(0.03)
self.headframe[self.chip][4] = (length>>24)&0xff
self.headframe[self.chip][5] = (length>>16)&0xff
self.headframe[self.chip][6] = (length>>8)&0xff
self.headframe[self.chip][7] = (length)&0xff
self.headframe[self.chip][8] = (address>>24)&0xff
self.headframe[self.chip][9] = (address>>16)&0xff
self.headframe[self.chip][10] = (address>>8)&0xff
self.headframe[self.chip][11] = (address)&0xff
data = array.array('B', self.headframe[self.chip]).tostring()
crc = self.calc_crc(data)
data += chr((crc >> 8)&0xff)
data += chr(crc&0xff)
self.sendframe(data,16)
def senddataframe(self,seq,data):
self.s.setTimeout(0.15)
head = chr(0xDA)
head += chr(seq&0xFF)
head += chr((~seq)&0xFF)
data = head + data
crc = self.calc_crc(data)
data += chr((crc >> 8)&0xff)
data += chr(crc&0xff)
self.sendframe(data,32)
def sendtailframe(self,seq):
data = chr(0xED)
data += chr(seq&0xFF)
data += chr((~seq)&0xFF)
crc = self.calc_crc(data)
data += chr((crc >> 8)&0xff)
data += chr(crc&0xff)
self.sendframe(data,16)
def senddata(self, data, address):
length=len(data)
self.sendheadframe(length,address)
seq=1
while length > self.MAX_DATA_LEN:
self.senddataframe(seq,data[(seq-1)*self.MAX_DATA_LEN:seq*self.MAX_DATA_LEN])
seq = seq+1
length = length-self.MAX_DATA_LEN
self.senddataframe(seq,data[(seq-1)*self.MAX_DATA_LEN:])
self.sendtailframe(seq+1)
def download(self, filename1, filename2):
f=open(filename1,"rb")
data = f.read()
f.close()
print 'Sending', filename1, '...'
self.senddata(data,self.bootheadaddress[self.chip])
print 'Done\n'
if filename2:
f=open(filename2,"rb")
data = f.read()
f.close()
print 'Sending', filename2, '...'
self.senddata(data,self.bootdownloadaddress[self.chip])
print 'Done\n'
def burnboot(chiptype, serialport, filename1, filename2=''):
downloader = bootdownload(chiptype, serialport)
downloader.download(filename1, filename2)
def startterm(serialport=0):
try:
miniterm = Miniterm(
serialport,
115200,
'N',
rtscts=False,
xonxoff=False,
echo=False,
convert_outgoing=2,
repr_mode=0,
)
except serial.SerialException, e:
sys.stderr.write("could not open port %r: %s\n" % (port, e))
sys.exit(1)
miniterm.start()
miniterm.join(True)
miniterm.join()
def main(argv):
'''
img2 = 'fastboot2.img'
'''
img1 = 'fastboot1.img'
img2 = ''
dev = '/dev/serial/by-id/usb-䕇䕎䥎_㄰㌲㔴㜶㤸-if00-port0'
try:
opts, args = getopt.getopt(argv,"hd:",["img1=","img2="])
except getopt.GetoptError:
print 'hisi-idt.py -d device --img1 <fastboot1> --img2 <fastboot2>'
sys.exit(2)
for opt, arg in opts:
if opt == '-h':
print 'hisi-idt.py -d device --img1 <fastboot1> --img2 <fastboot2>'
sys.exit()
elif opt in ("-d"):
dev = arg
elif opt in ("--img1"):
img1 = arg
elif opt in ("--img2"):
img2 = arg
print '+----------------------+'
print ' Serial: ', dev
print ' Image1: ', img1
print ' Image2: ', img2
print '+----------------------+\n'
if not os.path.isfile(img1):
print "Image don't exists:", img1
sys.exit(1)
if (img2):
if not os.path.isfile(img2):
print "Image don't exists:", img2
sys.exit(1)
burnboot('hi3716cv200', dev, img1, img2)
if __name__ == "__main__":
main(sys.argv[1:])
logs:
Code:
��������������������������������������������������������������������������������������������������������������������������0
===>vbus_is_high!
fastboot1 charger_type:CHARGER_TYPE_PC
get_hw_config_int,hw_afreq:1200000.
get_efuse_value,efuse ATE_flag temp:0x0af00000.
ATE PASS,ate flag value:0x00000001.
get_efuse_value,efuse acpu_freq change level:0x8e186100.
get_efuse_value,efuse afreq change level val:0x00000000.
get_efuse_value,efuse acpu_freq level:0x8e186100.
get_efuse_value,efuse acpu freq sys level:0x00000000.
###INFO###,soc_freq = hw_afreq, efuse_afreq:1200000,hw_afreq:1200000.
efuse ACPU 1.4G HPM:0.
efuse ACPU 1.2G HPM:0.
efuse ACPU 960M HPM:0.
fastboot: acpu_dvfs_init successful!
begin get voltage by hpm...
prof[729000]: hpm_dly_exp = 0x00000cb0, hpm_dly_exit = 0x00000cf6!
prof[960000]: hpm_dly_exp = 0x00000cb6, hpm_dly_exit = 0x00000cfc!
prof[1200000]: hpm_dly_exp = 0x00000e94, hpm_dly_exit = 0x00000eda!
acpu support freq num:5
volt:0x0000004a 0x0000004a 0x0000004a 0x0000004a 0x00000057
acpu_get_dvfs_volt,g_afreq_max_pro is :5��acpu max freq:1200000.
#### success !!!!! set_acpu_freq: acpu support freq num is 5 and start is 4 .
get_ddr_type 1; (lpddr2: 0; lpddr3: 1)
pass the func addr: [0xfff81b10]: 0xf980d044ddr_init(): get_ddr_type: 1
ddr freq: 800000
in lpddr3_init: mode: 0; freq_config: 800
switch ddr voltage: 1.25V -> 1.2V
lpddr3_init 150
lpddr3_150_rank0_init_pass
lpddr3_150_rank1_init_pass
lpddr3_init 266
lpddr3_266_rank0_init_pass
lpddr3_266_rank1_init_pass
lpddr3_init 400
lpddr3_400_rank0_init_pass
lpddr3_400_rank1_init_pass
switch ddr voltage: 1.2V -> 1.25V
lpddr3_init 533
lpddr3_rank0_phydraminit_pass
lpddr3_cat_pass
lpddr3_533_rank0_init_pass
rdet_lbs_passrdet_ds_passrdet_rbs_av_passwdet_lbs_passwdet_ds_passwdet_rbs_av_passlpddr3_533_rank1_init_pass
lpddr3_init 800
lpddr3_rank0_phydraminit_pass
lpddr3_cat_pass
lpddr3_800_rank0_init_pass
rdet_lbs_passrdet_ds_passrdet_rbs_av_passwdet_lbs_passwdet_ds_passwdet_rbs_av_passlpddr3_800_rank1_init_pass
ERROR: tmp_freq: 0
tmp_freq: 400000
MR8 value=:0x0000005b
MR5 value=:0x00000001
Samsung DDR
MR6 value=:0x00000004
MR5 value=:0x00000000
[MR7,MR6,MR5]=:0x00000401
ddr init pll1 0x00007800!ddrc_qos_init done
bootloader_logger got buffer at 0x07300000, size 0x00040000
bootloader_logger: no valid data in buffer , (sig = 0x43474244)
[emmc_set_card_ready]emmc id:0xb64432c9 0x520644c1 0x474e4433 0x15010038
[emmc_set_card_ready]manufid: 0x00000015
DDR mode emmc
--error: gps/ldo16
[SEC]check_oem_hw: carrier_id = 0x00000000
DX_BIV_SwImageVerification image id is 0x00000011, return is 0xf1000002 !
execute_load_fastboot2: In secure mode and fastboot2 verify failed!
Load fastboot2 failed!
hw_error_print : led = 12. func = 0. err = 0.
[fastboot]:k3_led_green_on
[fastboot]:k3_led_green_on
[fastboot]:k3_led_green_on
[fastboot]:k3_led_green_on
[fastboot]:k3_led_green_on
[fastboot]:k3_led_green_on
enter fatal_exception!
Unrecovery Error, go to onchiprom usbloader!
USB Soft Disconnect
��������������������������������������������������������������������������������������������������������������������������0
===>vbus_is_high!
fastboot1 charger_type:CHARGER_TYPE_PC
get_hw_config_int,hw_afreq:1200000.
get_efuse_value,efuse ATE_flag temp:0x0af00000.
ATE PASS,ate flag value:0x00000001.
get_efuse_value,efuse acpu_freq change level:0x8e186100.
get_efuse_value,efuse afreq change level val:0x00000000.
get_efuse_value,efuse acpu_freq level:0x8e186100.
get_efuse_value,efuse acpu freq sys level:0x00000000.
###INFO###,soc_freq = hw_afreq, efuse_afreq:1200000,hw_afreq:1200000.
efuse ACPU 1.4G HPM:0.
efuse ACPU 1.2G HPM:0.
efuse ACPU 960M HPM:0.
fastboot: acpu_dvfs_init successful!
begin get voltage by hpm...
prof[729000]: hpm_dly_exp = 0x00000caf, hpm_dly_exit = 0x00000cf5!
prof[960000]: hpm_dly_exp = 0x00000cb5, hpm_dly_exit = 0x00000cfb!
prof[1200000]: hpm_dly_exp = 0x00000e90, hpm_dly_exit = 0x00000ed6!
acpu support freq num:5
volt:0x0000004a 0x0000004a 0x0000004a 0x0000004a 0x00000057
acpu_get_dvfs_volt,g_afreq_max_pro is :5��acpu max freq:1200000.
#### success !!!!! set_acpu_freq: acpu support freq num is 5 and start is 4 .
get_ddr_type 1; (lpddr2: 0; lpddr3: 1)
pass the func addr: [0xfff81b10]: 0xf980d044ddr_init(): get_ddr_type: 1
ddr freq: 800000
in lpddr3_init: mode: 0; freq_config: 800
switch ddr voltage: 1.25V -> 1.2V
lpddr3_init 150
lpddr3_150_rank0_init_pass
lpddr3_150_rank1_init_pass
lpddr3_init 266
lpddr3_266_rank0_init_pass
lpddr3_266_rank1_init_pass
lpddr3_init 400
lpddr3_400_rank0_init_pass
lpddr3_400_rank1_init_pass
switch ddr voltage: 1.2V -> 1.25V
lpddr3_init 533
lpddr3_rank0_phydraminit_pass
lpddr3_cat_pass
lpddr3_533_rank0_init_pass
rdet_lbs_passrdet_ds_passrdet_rbs_av_passwdet_lbs_passwdet_ds_passwdet_rbs_av_passlpddr3_533_rank1_init_pass
lpddr3_init 800
lpddr3_rank0_phydraminit_pass
lpddr3_cat_pass
lpddr3_800_rank0_init_pass
rdet_lbs_passrdet_ds_passrdet_rbs_av_passwdet_lbs_passwdet_ds_passwdet_rbs_av_passlpddr3_800_rank1_init_pass
ERROR: tmp_freq: 0
tmp_freq: 400000
MR8 value=:0x0000005b
MR5 value=:0x00000001
Samsung DDR
MR6 value=:0x00000004
MR5 value=:0x00000000
[MR7,MR6,MR5]=:0x00000401
ddr init pll1 0x00007800!ddrc_qos_init done
bootloader_logger got buffer at 0x07300000, size 0x00040000
bootloader_logger: no valid data in buffer , (sig = 0x43474244)
[emmc_set_card_ready]emmc id:0xb64432c9 0x520644c1 0x474e4433 0x15010038
[emmc_set_card_ready]manufid: 0x00000015
DDR mode emmc
--error: gps/ldo16
[SEC]check_oem_hw: carrier_id = 0x00000000
DX_BIV_SwImageVerification image id is 0x00000011, return is 0xf1000002 !
execute_load_fastboot2: In secure mode and fastboot2 verify failed!
Load fastboot2 failed!
hw_error_print : led = 12. func = 0. err = 0.
[fastboot]:k3_led_green_on
[fastboot]:k3_led_green_on
[fastboot]:k3_led_green_on
[fastboot]:k3_led_green_on
[fastboot]:k3_led_green_on
[fastboot]:k3_led_green_on
enter fatal_exception!
Unrecovery Error, go to onchiprom usbloader!
USB Soft Disconnect
��������������������������������������������������������������������������������������������������������������������������́v
nUpdate debug uart baudRate to :921600
===>vbus_is_high!
fastboot1 download_mode:1
fastboot1 charger_type:CHARGER_TYPE_PC
get_hw_config_int,hw_afreq:1200000.
get_efuse_value,efuse ATE_flag temp:0x0af00000.
ATE PASS,ate flag value:0x00000001.
get_efuse_value,efuse acpu_freq change level:0x8e186100.
get_efuse_value,efuse afreq change level val:0x00000000.
get_efuse_value,efuse acpu_freq level:0x8e186100.
get_efuse_value,efuse acpu freq sys level:0x00000000.
###INFO###,soc_freq = hw_afreq, efuse_afreq:1200000,hw_afreq:1200000.
efuse ACPU 1.4G HPM:0.
efuse ACPU 1.2G HPM:0.
efuse ACPU 960M HPM:0.
fastboot: acpu_dvfs_init successful!
begin get voltage by hpm...
prof[729000]: hpm_dly_exp = 0x00000cad, hpm_dly_exit = 0x00000cf3!
prof[960000]: hpm_dly_exp = 0x00000cad, hpm_dly_exit = 0x00000cf3!
prof[1200000]: hpm_dly_exp = 0x00000e88, hpm_dly_exit = 0x00000ece!
acpu support freq num:5
volt:0x0000004a 0x0000004a 0x0000004a 0x0000004a 0x00000057
acpu_get_dvfs_volt,g_afreq_max_pro is :5��acpu max freq:1200000.
#### success !!!!! set_acpu_freq: acpu support freq num is 5 and start is 4 .
get_ddr_type 1; (lpddr2: 0; lpddr3: 1)
pass the func addr: [0xfff81b10]: 0xf980d044ddr_init(): get_ddr_type: 1
ddr freq: 800000
in lpddr3_init: mode: 0; freq_config: 800
switch ddr voltage: 1.25V -> 1.2V
lpddr3_init 150
lpddr3_150_rank0_init_pass
lpddr3_150_rank1_init_pass
lpddr3_init 266
lpddr3_266_rank0_init_pass
lpddr3_266_rank1_init_pass
lpddr3_init 400
lpddr3_400_rank0_init_pass
lpddr3_400_rank1_init_pass
switch ddr voltage: 1.2V -> 1.25V
lpddr3_init 533
lpddr3_rank0_phydraminit_pass
lpddr3_cat_pass
lpddr3_533_rank0_init_pass
rdet_lbs_passrdet_ds_passrdet_rbs_av_passwdet_lbs_passwdet_ds_passwdet_rbs_av_passlpddr3_533_rank1_init_pass
lpddr3_init 800
lpddr3_rank0_phydraminit_pass
lpddr3_cat_pass
lpddr3_800_rank0_init_pass
rdet_lbs_passrdet_ds_passrdet_rbs_av_passwdet_lbs_passwdet_ds_passwdet_rbs_av_passlpddr3_800_rank1_init_pass
ERROR: tmp_freq: 0
tmp_freq: 400000
MR8 value=:0x0000005b
MR5 value=:0x00000001
Samsung DDR
MR6 value=:0x00000004
MR5 value=:0x00000000
[MR7,MR6,MR5]=:0x00000401
ddr init pll1 0x00007800!ddrc_qos_init done
bootloader_logger got buffer at 0x07300000, size 0x00040000
bootloader_logger: found existing buffer, size 1044, addr 24
USB_DOWNLOAD_MODE
timestamp: 0xfff2c982
return from fastboot1!
uFileAddress=ss=07000000
uFileAddress=ss=07000000
uFileAddress=ss=07000000
image verify failed!
@michfood hmm okay i had a look. As i can understand your phone doesn't accept the second fastboot.img. I don't think that the problem is the crctable. Maybe you have a wrong fastboot.img?? Try to get a new dump from an another phone.
If your image it's an original dump then there is no reason why it fails to pass the check. The reason why i think the crc signature it's correct it is because you are able to download both images(i saw more details in 96boards forum).
the second image do not start.
after loading first - it says:
"timestamp: 0xfff2c982
return from fastboot1!
uFileAddress=ss=07000000
image verify failed!"
so it is returned from fastboot1 to onchip loader and tries to load second image - but fails.
have no possibility to look normal boot as all phones are under guaranty - nobody want to solder uart pins
Actually i didn't said to you to look at a normal boot uart log. In a normal boot you'll just see the kernel booting. Maybe you second fastboot.img is faulty...
the second boot is correct - from the update.app, as the first one
there is a thought that message "image verify failed" is an onchip loader message after fastboot2 loads, runs, made some checks of other partitions (broken) (with no UART messages) and exits with some error code.
here we can see difference between boot from eMMC (left) and boot from RAM (right)
http://clip2net.com/s/3mFVeRi
No, i think fastboot2 doesn't boot at all. Look at ths:
Code:
execute_load_fastboot2: In secure mode and fastboot2 verify failed!
If you try to load only one fastboot.img? what happens?
you just look at log booting from emmc. while booting from ram - no such message.
and once more - after loading first fastboot to RAM it exits with message "return from fastboot1" and tries to load second file to RAM. read carefully
I've got a honor 4x which uses the same chipset. Mine is also bricked but loads into Fastboot&rescue mode, which does not allow me to update the fastboot image due to a signature verify problem (BL31 image). This is related to ARM Trusted Firmware. Also, it does not load a new update.app from the SDCARD - Simply hangs on the logo screen. Therefore, I need to force it to flash a new fastboot.img. I read the HiKey user guide, and noticed there's a J15 SEL jumper, where, when closed, will attempt to program the flash from USB OTG source. Before a pull my phone apart, I would like to know whether anybody has tried flashing a new fastboot.img via USB OTG via closing the J15 SEL jumper and whether it worked. Or if there's any other way to boot my own fastboot.img
some info. i`m looking for motherboard on ali.. have no success
Same problem
michfood said:
Hi people.
I have new bricked Huawei Honor 4c with HiSilicon Kirin 620 octacore (Hi6620) Hardly bricked.
I`ve unlocked bootloader and custom recovery used to flash it with my own update.zip from other phone (with LTE support). At the end of flashing - it turned off and bricked.
BUT! After connecting to PC via USB it flashes GREEN and RED leds a few times and after windows determines it as a device with USB\VID_12D1&PID_3609&REV_0000 and named as 䕇䕎䥎 ㄰㌲㔴㜶㤸 .
It is Huawei`s VID. And after a lot of search I found a driver for it - and device became HUAWEI USB-COM 1.0. But nothing else.
No flash utility, nothing. HiSilicon-IDT for K3 processor doesn`t work.
After another searches I found very similar device - it`s named HiKey board. Based on Hisilicon Kirin processor too https://www.96boards.org/.
As we can see - it is very close to ours phone.
It is fully documented and has a lot of spec about proc and other.
And in it`s manual written about recovery procedure after damage of ROM - when device is powered on - it is in "download mode" for 90 seconds - abslolutly like mine phone - after 90 second it turns off from windows.
In short - it is ability to write 2 fastboot images (fastboot1.img and fastboot2.img) in RAM, launch them and using fastboot command flash images to eMMC. They use SERIAL COM PORT to manipulate with device.
It uses utility called "hisi-idt.py" - it is a python script for Linux based machines.
I`ve Installed Linux Mint and try it.
And I`ve some result - first image is going fine and I receive "Done"
But second image is always "Failed". And fastboot command "fastboot devices" do not list any devices.
Viewing binaries from my ROM (Fastboot.img and Fastboot1.img) in HEX - I can see load addresses to ROM are the same as in python script. It is 0xf9800800 and 0x0700000 for both images.
But.... have no success. It looks like I`m close to the goal.
Any ideas?
Click to expand...
Click to collapse
Hi,
I'm stucked in the same hard brick. Could you provide a download link for the driver you found?
Are there news about progresses with this issue?
Thank you very much, I'll try to help if you want
In China,Hisilicon Kirin 620 is hi6210,not 6620.You can get the source code of HUAWEI Honor 4C from:http://emuirom123.dbankcloud.com/Cherrymini_kernel_[Android 5.1 EMUI3.1].tar.gz?rid=1520
It is for the China Mobile version(CHM-TL00H) with Kirin 620.
Chinese version Kirin 620 runs 8×A53 1.2GHz cores and ARM Mali-450 MP4 Gpu.The baseband of hisilicon kirin 620 is Balong V8R1SFT.
Sorry for my bad English.
来自搭载Android 2.3 GingerBread的华为Y220-T10
JackLenz said:
Hi,
I'm stucked in the same hard brick. Could you provide a download link for the driver you found?
Are there news about progresses with this issue?
Thank you very much, I'll try to help if you want
Click to expand...
Click to collapse
still nothing
zhaozihanzzh said:
In China,Hisilicon Kirin 620 is hi6210,not 6620.You can get the source code of HUAWEI Honor 4C from:http://emuirom123.dbankcloud.com/Cherrymini_kernel_[Android 5.1 EMUI3.1].tar.gz?rid=1520
It is for the China Mobile version(CHM-TL00H) with Kirin 620.
Chinese version Kirin 620 runs 8×A53 1.2GHz cores and ARM Mali-450 MP4 Gpu.The baseband of hisilicon kirin 620 is Balong V8R1SFT.
Sorry for my bad English.
来自搭载Android 2.3 GingerBread的华为Y220-T10
Click to expand...
Click to collapse
thanks for info - but how it helps?
michfood said:
still nothing
Click to expand...
Click to collapse
And what about the driver link?
I found some source code on github, maybe it could be useful
https://github.com/muhammadfahadbaig/android_vendor_huawei_hi6210sft

Categories

Resources