Kernel Oreo 32/64 bit for Montana(moto g5s)
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
2 oreo kernel versions, one for 32bit rom(oreo stock rom)
and one for 64bit rom(lineage-15.1 or others 64bit 8.1.0 oreo roms)
oreo32 kernel
21-01-2019
-CPU BOOST
-Overclok CPU 1.4976/1.209GHZ, Underclock CPU 345/249 Mhz
-Overclock GPU 500Mhz
-Hotplug
-CPU-freq governors, alucard, alesa
-TCP-congestions veno, vegas, westwood, hybla
oreo64 kernel
-fixed camera for los15.1 arm64
-fingerprint not work yet(on oreo based files), it may work on downgraded phones(not tested)
20-01-2019
-CPU BOOST
-Overclok CPU 1.4976/1.209GHZ, Underclock CPU 345/249 Mhz
-Overclock GPU 500Mhz
-Hotplug
-CPU-freq governors, alucard, alesa
-TCP-congestions veno, vegas, westwood, hybla
Both versions are flashable with TWRP only!
before flash them, MAKE first a BACKUP of youre working rom!!!
kernel source:https://github. com/vaserbanix/kernel-msm8937-Oreo-montana
Dont use that kernels on nougat 7.1.0 roms
Thankyou!
Tip! for oreo stock rom
Only for rooted phones!
go to system/vendor/bin/ and rename(dont delete) the init.qcom.post_boot.sh to init.qcom.post_boot.sh.bak
reboot the phone!
this will increase the performance of the phone, in antutu, the score will jump from 58000 to 60-61000
IF you are not satisfied by the results, just rename back the file and reboot the phone!
Enjoy!
When I install the kernel, the ROM camera 15.1 stops working.
ilovepanda said:
When I install the kernel, the ROM camera 15.1 stops working.
Click to expand...
Click to collapse
for the moment i know los15.1 work with downgrade from oreo to nougat to be able to camera and fingerprint to work!
oreo64 kernel is based to work with full oreo based files(no downgrade to nougat)
soon as los15.1 will be stable, i will keep and update or delete the oreo64-kernel, depend by what based files will be used for los15.1!
Thankyou!
my bootloader is still from nougat, I have not lost FingerPrint and neither imei, I changed several times from oreo to nougat and nougat to oreo, from oreo 15.1 to nougat and still not lost .. however, I was in Lineage 15.1 with the camera running, and decide to test the kernel arm64 to see if the battery consumption could decrease a little, because the LOS 15.1 is with the high consumption, so when I installed I realized that the camera stopped working, only her.
kerne oreo64 updated!
fixed camera
fingerprint not work on oreo based files yet, it may work on downgraded phones to nougat!
Thankyou!
Kernel update
Kernel oreo64 updated!
changelog in first post.
Thankyou!
vaserbanix said:
Kernel oreo64 updated!
changelog in first post.
Thankyou!
Click to expand...
Click to collapse
I installed the 64 bit kernel, and the fingerprint stopped working, any solution? Thank you in advance for your work.
Carlinhoiori said:
I installed the 64 bit kernel, and the fingerprint stopped working, any solution? Thank you in advance for your work.
Click to expand...
Click to collapse
Extract the boot.img file from custom rom's folder (e.g. lineage, aicp etc.)
than flash that image in fastboot with below cmd-
mfastboot flash boot boot.img
Carlinhoiori said:
I installed the 64 bit kernel, and the fingerprint stopped working, any solution? Thank you in advance for your work.
Click to expand...
Click to collapse
i specified in changelog and few posts above about fingerprint not work on oreo based file!
it may work but not tested and not confirmed in downgraded phones from oreo to nougat for los15.1 and simmilar roms.
resuming you did first a backup(how i recomend in first post), you have just to restore that backup to get your system working with fingerprint
Kernel oreo32 updated!(for oreo stok rom only)
read changelog for news!
Thankyou!
Moto actions
Tem como resolver o problema do moto acoes parar quando instalo o kernel?
Obrigado pelo ótimo trabalho
Waiting for Pie compatible kernel :3
Do replacement touchscreens work with this kernel? It's only that keeps me on stock Nougat.
Kernel Oreo stock 32bit, wi-fi does not work, gets disabled
Could you upgrade to be compatible with the new builds oreo stock?
hello friend, I shot downgrade on my g5s and always lose IMEI, please could you help me wanted to go back to nougat
---------- Post added at 03:12 PM ---------- Previous post was at 03:11 PM ----------
vaserbanix said:
for the moment i know los15.1 work with downgrade from oreo to nougat to be able to camera and fingerprint to work!
oreo64 kernel is based to work with full oreo based files(no downgrade to nougat)
soon as los15.1 will be stable, i will keep and update or delete the oreo64-kernel, depend by what based files will be used for los15.1!
Thankyou!
Click to expand...
Click to collapse
hello friend, I shot downgrade on my g5s and always lose IMEI, please could you help me wanted to go back to nougat
vaserbanix said:
Kernel Oreo 32/64 bit for Montana(moto g5s)
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
2 oreo kernel versions, one for 32bit rom(oreo stock rom)
and one for 64bit rom(lineage-15.1 or others 64bit 8.1.0 oreo roms)
oreo32 kernel
21-01-2019
-CPU BOOST
-Overclok CPU 1.4976/1.209GHZ, Underclock CPU 345/249 Mhz
-Overclock GPU 500Mhz
-Hotplug
-CPU-freq governors, alucard, alesa
-TCP-congestions veno, vegas, westwood, hybla
oreo64 kernel
-fixed camera for los15.1 arm64
-fingerprint not work yet(on oreo based files), it may work on downgraded phones(not tested)
20-01-2019
-CPU BOOST
-Overclok CPU 1.4976/1.209GHZ, Underclock CPU 345/249 Mhz
-Overclock GPU 500Mhz
-Hotplug
-CPU-freq governors, alucard, alesa
-TCP-congestions veno, vegas, westwood, hybla
Both versions are flashable with TWRP only!
before flash them, MAKE first a BACKUP of youre working rom!!!
kernel source:https://github. com/vaserbanix/kernel-msm8937-Oreo-montana
Dont use that kernels on nougat 7.1.0 roms
Thankyou!
Click to expand...
Click to collapse
Is there a kerner for lineage 18.1 ???
Related
ALIZE KERNEL FOR STOCK/NOUGAT
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Here is the thread for the Oreo variant ALIZE KERNEL FOR OREO :good:
Introduction:
The main objective of the kernel is to give to any user, a stock kernel with some tweaks like new CPU govenor focused on battery, performance and both of them, I/O scheduler, ...
Click to expand...
Click to collapse
Features:
Updated to lastest Motorola source
Kernel upstreamed to lastest source (3.18.89) compiled with Linaro-7.2
Boeffla Wl Blocker
Maple I/O sched
Frandom for random number
Wakeup boosted (time in milliseconds instead of seconds)
CRC check disabled (Performance boosted)
Vibration control
Sound control
Kcal support
Backlight dimmer
Fsync support
Safetynet patch
Makefile: -0fast, -O3 and Graphite optimizations
LZ4 compression (instead of XZ)*
Faster boot (higher read_ahead size for bootup)
All feature of the boulzordev's kernel
Many other tweaks (check github)
Some of these features is not yet added in the Stock variant.
Click to expand...
Click to collapse
Download (Nougat LOS-AOSP based)
**Nougat(V42 - WITH NEW GESTURES ONLY)**
Download: https://sourceforge.net/projects/alize/files/Nougat/AlizeR-7.x_v42.zip/download
Changelog: https://github.com/Martichou/alize_potter/commits/a7x
Click to expand...
Click to collapse
**Stock(V110)**
Download: https://sourceforge.net/projects/alize/files/Stock/Alize-stock_v110.zip/download
Be careful, stock variant will ONLY work on very LASTEST version of the ROM.
See below
Some known version which work:
- Retus: 137-83
- Retin: 137-67-5
- Retmx: 137-78-4
- Stock deodexed
But these are not exhaustive!
This one don't work:
- Retus: 137-43-5
Click to expand...
Click to collapse
How to flash:
1. Download Alize for Potter
2. Reboot to recovery
3. Flash kernel's zip
4. Reboot and tweak with proper app (Kernel auditor, Ex kernel manager, ...)
Click to expand...
Click to collapse
*Learn more about LZ4
- https://events.linuxfoundation.org/sites/events/files/lcjpcojp13_klee.pdf
- http://catchchallenger.first-world.info/wiki/Quick_Benchmark:_Gzip_vs_Bzip2_vs_LZMA_vs_XZ_vs_LZ4_vs_LZO
TELEGRAM GROUP:
https://t.me/joinchat/EWMwLkNn0rIRNNctA75U3A
Credits:
Lineage Team
Acuicultor
Vache (for source and Oreo, and so many things)
fAiyaZ (for upstreamed the kernel from .32 to .61 and more things)
And many other.. (PM if you want me to add you.)
XDA:DevDB Information
ALIZE, Kernel for the Moto G5 Plus
Contributors
Martichou
Source Code: https://github.com/Martichou/alize_potter/
Kernel Special Features:
Version Information
Status: Stable
Created 2017-11-06
Last Updated 2017-12-24
As there aren't any official Oreo roms for this model I assume your kernel works with Lineage 15
Good work bro
Muchoaliento said:
As there aren't any official Oreo roms for this model I assume your kernel works with Lineage 15
Click to expand...
Click to collapse
There is lots of Oreo rom available.
Between this thread is only for Nougat or Stock rom.
And yes, my Oreo variant work on LOS15.
Good kernel bro .Keep it up
Witch one is needed for Validus rom latest version?
cdfreak said:
Witch one is needed for Validus rom latest version?
Click to expand...
Click to collapse
If it's Oreo, then there is the other thread.
If it's nougat, take the nougat version.. you're not on stock so it's not difficult to know.
I switched from Androidfilehost to Sourceforge as some users faced lots of bugs with AFH.
New build is up! (ALIZE KERNEL - Potter)
*General changes:*
- Upstreamed to .81
- Switch for GENTLE_FAIR_SLEEPERS
- Check github for more
**Nougat (V44 without new gestures)**
https://sourceforge.net/projects/alize/files/Nougat/Alize-7.x_v44.zip/download
**Nougat (V44 with new gestures)**
https://sourceforge.net/projects/alize/files/Nougat/Alize-7.x_v44_gestures.zip/download
Are u going to keep updating?
fr3d0x said:
Are u going to keep updating?
Click to expand...
Click to collapse
join the telegram group - He is working all the time
how to recompile this kernel after upstream... i had successfully upstream the kernel source with latest patches and few fixes...
now i need to compile it for moto g5 plus..
please help me and give full proceedure to perform this operation. Thankyou
I just started using latest aokp. How would I know if it has "new Gestures"?
Sent from my XT1687 using Tapatalk
buggerritt said:
I just started using latest aokp. How would I know if it has "new Gestures"?
Sent from my XT1687 using Tapatalk
Click to expand...
Click to collapse
It has
New build is up !
Rebased
V42
https://sourceforge.net/projects/alize/files/Nougat/AlizeR-7.x_v42.zip/download
OP requested thread to be closed.
Ultimate Kernel For Samsung Galaxy S6 and S6 Edge
This kernel aims for best balance between battery life and performance and it was on testing for more than 3 months, so you can be sure that this kernel is very stable. Also I dont think to implement synapse it is not supported by me and will never be
Disclaimer:
Code:
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Compiled With Google's TC v4.9
Linux Kernel 3.10.108 Patched
Binder Patch From Linux 4.9
SELinux Permissive
CPU Underclock Support 200mhz both clusters
CPU Overclock Support (1800mhz-A53/2400mhz-A57)
GPU Underclock 100mhz
GPU Overclock 852mhz
CPU and GPU Voltage Controls
Memory Bus Voltage Controls
Fully Working AOD Thanks @AntonioMartitos
Init.d Support Thanks @Noxxxious
Safetynet Bypass
WiFi Forget Fix @Noxxxious
use Android device as USB keyboard/mouse (no driver required; compatible with any OS and BIOS) @minealex2244
DriveDroid Patch @minealex2244
Lot Of CPU Governors and IO Schedulers Added
DT2W Support
Spectrum Support (Profiles Base @Noxxxious)
Optimized HMP
KNOX 0x0
XPAD Support
Wireguard Patch
Frandom Support
Led Controls (FadeLed)
MTweaks (Use Till I Fix Synapse)
!!!DON'T FORGET TO FLASH ROOT (MAGISK OR SUPERSU)!!!
Installation
Go in to TWRP Recovery
Flash Ultimate-Kernel-G920/5-7.0.zip
Now Flash Root (Magisk or SuperSU)
Reboot Phone and You are Good
If you want to contribute just pm me on telegram @enesuzun
If you like the kernel just press thanks button :fingers-crossed:
Downloads:
Ultimate Kernel V1.0
Credits:
The Sickness (his guide and scripts)
Minealex2244 for his kernel repo for being so clear and helpful
Others I've used the commits from
XDA:DevDB Information
Ultimate Kernel, Kernel for the Samsung Galaxy S6
Contributors
enesuzun2002
Source Code: https://github.com/enesuzun2002/Ultimate-Kernel
Kernel Special Features:
Version Information
Status: Stable
Created 2018-05-30
Last Updated 2018-05-30
reserved 2
Just installed on stock rooted rom and testing... good work
Looks great ! Just to be sure, does it work with Ultimate Nougat V3.1 rom ?
sm-a510f said:
Looks great ! Just to be sure, does it work with Ultimate Nougat V3.1 rom ?
Click to expand...
Click to collapse
yes it works pretty fine
enesuzun2002 said:
yes it works pretty fine
Click to expand...
Click to collapse
Thanks, and how does fadeled, XPAD and use phone as keyboard/mouse works ?
Hello,so far seems very good!will there be undervolt support?
Proximity sensor don't work on Frankenstein rom - like stock.
Synapse too, but you said about that.
Seems to be best kernel for 7.0 stock-based ROMs.
Using it with MIPA S8+ Port. No bugs noticed, except maybe ZSWAP:
It keeps getting re-enabled in MTweaks, and I put it at 0%, but now can't change that.
Superb kernel!! Thank you
does it work with Resurrection Remix-OS ? and can you provide me a good camera app for this Resurrection Remix-OS thanks in advance
Does it support S7 Edge battery mod ? Thx
flashed it on my Stock 7.0 G925i for two weeks, it works fine
Wonderful kernel with mtweaks
King-V said:
Seems to be best kernel for 7.0 stock-based ROMs.
Using it with MIPA S8+ Port. No bugs noticed, except maybe ZSWAP:
It keeps getting re-enabled in MTweaks, and I put it at 0%, but now can't change that.
Click to expand...
Click to collapse
Hi how did you install it? Did you have to dirty flash the rom? Then root after? Thanks
very nice kernel, thank you! are you planning to add a double tap to wake function?
How is gaming on this kernel? Thanks
cosmic899 said:
Hi how did you install it? Did you have to dirty flash the rom? Then root after? Thanks
Click to expand...
Click to collapse
Had MIPA already on my device. Flashed this, and then flashed latest Magisk.
I guess this kernel is not working on ultimate Nougat S8 Port?
Regards
Sent from my SM-G960F with Tapatalk
j1gga84 said:
I guess this kernel is not working on ultimate Nougat S8 Port?
Regards
Click to expand...
Click to collapse
Yes it does work on ultimate nougat s8 port mate
Introduction:
Affinity Kernel is a custom kernel based on the latest Stable Linux 4.4 release from kernel.org.
This kernel is developed with performance and great battery life in mind offering some goodies cherry-picked from other popular kernels such as Flash Kernel, ElementalX, blu_spark, Boeffla Kernel, Sultan Kernel and Franco Kernel.
The kernel is always up to date with mainline linux kernel and is regulary updated with the latest fixes.
The goal is to provide a butter smooth experience, simmilar to what you get with the latest Pixel devices.
Affinity Kernel is based on the official kernel source released by OnePlus.
Code:
/*
* Your warranty is not void (Thank you OnePlus!).
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Upstreamed to the latest Linux Stable 4.4.x
Upstreamed to the latest CAF tag LA.UM.6.4.r1-11500-8x98.0 & LA.UM.7.4.r1-04800-8x98.0
Tunable with Kernel Adiutor and others
Additional CPU gorvernors
Sound Control
Adreno Idler by @arter97
Full WireGuard implementation
Sweep2Sleep gesture
Fast charging on USB
FS fsync toggle (enabled by default)
Additional IO schedulers (Maple, FIOPS, SIO, ZEN)
Qualcomm MDSS v2 (sRGB + KCAL)
dm(avb)-verity disabled
Faster app cold-launch
IO Tuning
Optimized with oFast and O3
Westwood TCP algorithm as default
Full Treble compatibility with Treble related fixes
Individual Input Boost frequency for each cluster
Disabled the BCL battery driver
Backlight Dimmer by @flar2
Boeffla Wakelock blocker v1.1.0
CDROM emulation
init.d support
ARM target optimizations
Passes SafetyNet check
Crypto Routines optimizations
High Brightness mode
Adreno driver improvements
EAS
Dynamic SchedTune Boost v3
KLAPSE Driver
Decreased swappiness
Installation:
Before you install the kernel, make sure you have
a backup of boot partition in case something goes wrong!
If you are coming from stock kernel:
Reboot into TWRP
Flash the Affinity Kernel.zip
Reboot
If you are coming from another custom kernel:
Reboot into TWRP
Dirty flash your rom or restore boot backup if you have any
Reboot recovery
Flash the Affinity Kernel.zip
Reboot
Updating:
Just flash the latest Affinity Kernel build over the previous one
Downloads:
{Mod edit}
On ROMs like Dirty Unicorns, WLAN won't work because the wlan module is required
to load on device initcall rather than late initcall like other ROMs do. There's a workaround for it but
it breaks WLAN on all ROMs that have the module built inline or the CAF way
{Mod edit}
Thanks to:
@joshuous for his EAS commits and Dynamic Sched Boost
@osm0sis for his AnyKernel2 installer
@nathanchance for his android-linux-stable project and helping me
@Lord Boeffla for Boeffla Wakelock Blocker and LED control
@Sultanxda for his fixes and other stuff
@eng.stk for his tweaks
@flar2 for his Sweep2Sleep gesture driver
@tanish2k09 for KLAPSE Driver
And all those folks contributing to Linux Kernel
XDA:DevDB Information
Affinity Kernel, Kernel for the OnePlus 5T
Contributors
LinuxUser0227
Source Code: https://github.com/hejsekvojtech/Affinity-OnePlus5
Kernel Special Features: Fast, Battery friendly, Stable, Up to date
Version Information
Status: Stable
Created 2019-02-20
Last Updated 2020-04-28
I'll take this one
And this one
Thanks for the work, ill give it a try.
2 thing that bugs me are:
1- isnt restoring stock boot.img removes custom recovery and replaces it with stock one?(had that problem before)
2-is the kernel(pie) eas or hmp?
finally:good:
Thank you for your working on this kernel !
I have a problem with the least one. It's an eas kernel. My oneplus 5t restart it's os staying oneplus log more than 1 minute.Using r19 kernel spends about 30 seconds.
Is thit normal?
thank you.
---------- Post added at 06:41 AM ---------- Previous post was at 06:40 AM ----------
directorli said:
Thank you for your working on this kernel !
I have a problem with the least one. It's an eas kernel. My oneplus 5t restart it's os staying oneplus log more than 1 minute.Using r19 kernel spends about 30 seconds.
Is thit normal?
thank you.
Click to expand...
Click to collapse
I'm using least oos ob24.
gsser said:
Thanks for the work, ill give it a try.
2 thing that bugs me are:
1- isnt restoring stock boot.img removes custom recovery and replaces it with stock one?(had that problem before)
2-is the kernel(pie) eas or hmp?
Click to expand...
Click to collapse
1. Yes but it's better to do a backup of boot that has Magisk installed so you don't have to reflash TWRP
2. Since r20 it's EAS based
directorli said:
Thank you for your working on this kernel !
I have a problem with the least one. It's an eas kernel. My oneplus 5t restart it's os staying oneplus log more than 1 minute.Using r19 kernel spends about 30 seconds.
Is thit normal?
thank you.
---------- Post added at 06:41 AM ---------- Previous post was at 06:40 AM ----------
I'm using least oos ob24.
Click to expand...
Click to collapse
Haven't seen such behaviour yet, some users reported that it works perfectly on both 5 and 5T.
If I'm coming from a kernel like bluspark, I must flash the stock boot img first, correct? Where can I find this?
Amisuta said:
If I'm coming from a kernel like bluspark, I must flash the stock boot img first, correct? Where can I find this?
Click to expand...
Click to collapse
Dirty flash your rom
Kernel is good. Only thing i saw was cpu clocks wouldnt go down less than 800mhz and 500mhz.
Solid, liquid smooth, clean. For me it is better than RZ kernel
Sent from my OnePlus5T using XDA Labs
gsser said:
Kernel is good. Only thing i saw was cpu clocks wouldnt go down less than 800mhz and 500mhz.
Solid, liquid smooth, clean. For me it is better than RZ kernel
Click to expand...
Click to collapse
How many sot do you get?
gsser said:
Kernel is good. Only thing i saw was cpu clocks wouldnt go down less than 800mhz and 500mhz.
Solid, liquid smooth, clean. For me it is better than RZ kernel
Click to expand...
Click to collapse
Minimum frequency is 518 and 806 because Qualcomm did it so people follow it
sleepwalking0593 said:
Minimum frequency is 518 and 806 because Qualcomm did it so people follow it
Click to expand...
Click to collapse
Qualcomm or OnePlus? (Not doubting you genuinely curious)
haikalzarith said:
How many sot do you get?
Click to expand...
Click to collapse
8 and 17 standby
Sent from my OnePlus5T using XDA Labs
1 hour of youtube
Sent from my OnePlus5T using XDA Labs
Heisenberg420 said:
Qualcomm or OnePlus? (Not doubting you genuinely curious)
Click to expand...
Click to collapse
Qualcomm did it. So OnePlus followed them
gsser said:
1 hour of youtube
Click to expand...
Click to collapse
Hello
Are you using greenify or any other tweaks of that kind.
Thanks
Teso79 said:
Hello
Are you using greenify or any other tweaks of that kind.
Thanks
Click to expand...
Click to collapse
I dont.
Affinity Kernel r21 is up!
Since r21, Affinity Kernel is available for custom ROMs as well. Should work well with every ROM except of OmniROM and TreskMod (which is Pixel-like OmniROM)
because Omni has its own way of loading the WLAN module so WiFi might be most likely broken. Anyway, you may also notice that on some ROMs that have EAS baked in, Affinity Kernel
default settings are not getting applied. That's because the ROM has its own post boot init script that overwrites my settings, not a big deal.
Here's the changelog:
Upstreamed to Linux 4.4.176
Support for custom ROMs
Some touchups for init script
Added O3 GCC optimalization
Readahead improvements
A bunch of kgsl improvements (adreno driver)
devfreq improvements
Special thanks to @itexpert.120 for making this ROM bootable, smooth and stable.
CrDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them! *Not responsible for any damage caused to your device*
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's working :
RIL (in-call audio, messaging, data)
Bluetooth (including audio)
WiFi
Audio (music, etc)
Camera (including video recording)
Flash
Sensors
GPS
Known issues:
NFC doesn't work
SE Linux is permissive
FOLLOW INSTRUCTIONS CAREFULLY OTHERWISE YOU WILL GET ERROR :
Reboot to recovery
Wipe cache, dalvik cache, data (If you have done format instead of wipe reboot the recovery once else it will end up with issues/errors)
Flash ROM
Flash Open Gapps (ARM - Pico (my recommendation) - 9.0)
Done- Reboot Now
Enjoy the clean ROM
Notes:
-Also, the device may overheat so install any kernel manager and enable the thermal driver (works without a overheating at all in my case)
-Set second sim to 2g if you want to have them both working
Minor Details:
-tripndroid default I/O scheduler.
-Extreme optimisations.
-GP kernel for best pefromance.
-Probably smoothest PIE ROM
Downloads:
ROM: https://www.androidfilehost.com/?fid=8889791610682893012
GAPPS:
https://opengapps.org
CREDITS/THANKS TO... @itexpert.120 [developer]
If you feel upset about not being credited, PM me and you'll be!
Sources:
-ROM https://github.com/crdroidandroid
-Kernel https://github.com/DoctorStrange96/android_kernel_samsung_msm8916
ROM information:
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Marshmallow Bootloader / 3.2 TWRP
Based On: LineageOS
Very good rom sir, really very smooth. And battery is also very good. Thanks for this rom ?.
But sir I had a question, why samsung custom rom doesn't supports volte where as mi and other phones does support it. I am new to this world that's why I have some queries in my mind. I tried searching on google but no answers ?.
Revolution.. said:
Very good rom sir, really very smooth. And battery is also very good. Thanks for this rom ?.
But sir I had a question, why samsung custom rom doesn't supports volte where as mi and other phones does support it. I am new to this world that's why I have some queries in my mind. I tried searching on google but no answers ?.
Click to expand...
Click to collapse
The phone itself (J5 2016) doesn't support VoLTE. Samsung use some workarounds (aka tricks) to make the phone work over VoLTE. We didn't find any way to implement it in AOSP ROMs for now.
Update.
Changelog:
Fixed FM
Defined vendor patch lineage way
Used dexpreopt for heavy apps
Set mtp on default for USB
Shorten the shutdown time
Increase art heap growth to 192 mb
Added apex image
Tried to increase audio/volume
Fixed typo
Fix multi sim (wasnt broken In first place)
Used full res boot animation
Changed libhealthd.lineage to libhealthd.default
Increased Zram
Enabled doze
Disabled gfx something
Added some graphics tweaks
Added some ram management tweaks
Added zram tweaks
Added build.prop tweaks
Updated audio hal (lineage 17.1)
Updated boringssl
Added Advanced Display
& more
Individual build changelog
crDroid Pie build for J5xnlte
* ZX Kennel
* No call issues
* AOD present
* Perf Improvement
DO NOT DIRTY FLASH
DOWNLOAD LINK IN OP
(Link 404. Will be fixed soon)
NecromancerViper said:
(Link 404. Will be fixed soon)
Click to expand...
Click to collapse
Please fix it soon, I am really exited to test the rom ?.
Sources are broken, this drops support.
NecromancerViper said:
Sources are broken, this drops support.
Click to expand...
Click to collapse
Okay, so does that mean it is not accesible at all anymore? No mirrors or anything?
Link is not working
Optimus Drunk Kernel for POCO X3 (NFC)
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
- Based on Stormbreaker kernel
- Built with latest AOSP clang
- AnyKernel3
- Wireguard support
- Wakelock blocker
- Anxiety, Sio, Fiops, Zen & Maple I/O Schedulers
- MIUI is not supported
Download:
Github
FKM Updater
Installation:
Dirty flash your rom if you have another custom kernel installed
Flash the zip in TWRP or Orangefox and reboot, that's all
Support Group:
Telegram
XDA:DevDB Information
Optimus Drunk Kernel for POCO X3, Kernel for the Xiaomi Poco X3
Contributors
GtrCraft
Source Code: https://github.com/GZR-Kernels/Optimus_Drunk_Surya
Reserved
Reserved again
@GtrCraft , its support ip6tables nat ? just like samsung stock kernel ?
Yeah! First kernel thread.
Thanks @GtrCraft
Funziona anche su miui
Funziona anche su miui ??
Very Great!!! For Beryllium and now for Surya too Great Job!
With this kernel + custom roms do we still have 5Ghz wifi bug?
.
Can be flashed on MIUI stock ROM? If yes, what are instructions for the flash?
Wow. Appreciate the work you put into this. I'll wait for feedback before I try this.
v11.1 is here:
Release Optimus Drunk Surya v11.1 · GZR-Kernels/Optimus_Drunk_Surya
Updated to 4.14.210 Added multiple I/O schedulers, boeffla wakelock blocker, klapse & kcal support Set Maple as default I/O Scheduler Set lz4 as default comp algorithm Enabled some powersaving stu...
github.com
Changelog:
Updated to 4.14.210
Added multiple I/O schedulers, boeffla wakelock blocker, klapse & kcal support
Set Maple as default I/O Scheduler
Set lz4 as default comp algorithm
Enabled some powersaving stuff (quicker deepsleep, wakelock timeout etc.)
Alin45 said:
Can be flashed on MIUI stock ROM? If yes, what are instructions for the flash?
Click to expand...
Click to collapse
Read OP
aLexzkter said:
With this kernel + custom roms do we still have 5Ghz wifi bug?
Click to expand...
Click to collapse
I have 5 ghz wifi, so what's the problem?
Presumably he means the very poor WiFi signal strength which is seen across all custom roms for this device when compared with stock.
I too would love for this issue to be fixed. I can barely use WiFi out with the room that my router is in!
Would be great if this kernel improved the signal strength.
Upon testing, the kernel only works for devices on the latest firmware.
@Revontheus well, I am on 12.0.3 and kernel is working perfectly
edit: just tested latest version (1.1) and indeed is not booting on 12.0.3 , just frozen on POCO logo...
Oh! This is surya's first custom kernel!! Thanks you