Fixing mobile data (3g) after installing Cyanogenmod 7 (nightly)
Hello all. I'm writing this as a long-time lurker and custom ROM / kernel user, who has been helped along greatly by this forum.
I had a long-standing issue that I couldn't find any clarity on: my mobile data access didn't work after switching to custom Roms/Kernels from LG's original Froyo Rom.
After months of thinking it was just an odd bug, and something to live with (since I rarely use data), I decided to look a little deeper into the problem. I found it difficult to even find information on the problem - there's a lot of bad information, and a lot of hard-to-read information from friendly, but not perfectly fluent English speakers.
In short, I'm hoping that others who are struggling with this issue will find this post with some Googling, and won't have to be as confused as I was.
After doing the following, I have everything working perfectly and here's how I did it:
1) I knew that the right baseband (under About Phone, in Settings) had something to do with mobile connections, including 3g data authentication and transfer. I found that v10 (and older) basebands are considered the 'old' baseband, while v20 basebands are considered 'new' basebands.
2) Cyanogenmod often reports the baseband incorrectly, so finding out what baseband you're on is unreliable through the About Phone menu, if you're already on CM7.
3) There are some scary sounding techniques to update your baseband (one involves using a poorly documented program called 'LGMDP-v1.5.exe'). These techniques can apparently brick your phone, so I avoided them. I might be wrong on some of the details here, so let me know!
4) I instead obtained the latest baseband by simply letting the LG update software (in my case from LG.ca) update my phone to Android 2.3. I noticed that I now had baseband v20. My mobile data worked!
5) I then re-rooted the phone, using SuperOneClick.
6) Installed the latest CM7 nightly. Mobile data no longer worked
6.5) I should mention, I tried other ROM/Kernel combinations and ended up having crashes and hangs on boot - thankfully I could use 'adb reboot recovery' to get back to Clockwork Recovery, when even holding various keys on reboot to do this didn't work).
7) Installed the wonderful ta-gb 1.1 kernel (thanks to all of the devs who worked on this and others like it).
8) And lastly (and possibly most importantly) I came across this:
https://github.com/CyanogenMod/andr...gingerbread/prebuilt/common/etc/apns-conf.xml
It's a list of APN information, which corresponds to different carriers, and appears to be necessary for mobile data connections. My carrier (Koodo) was not listed here, and therefore appears to not be included in even the latest Cyanogenmod 7 (as of Feb 2012).
9) This led me to find this: http://code.google.com/p/cyanogenmod/wiki/APNlist
Which happened to include the APN information for my carrier that I needed to put in, under Mobile Networks > Access Point Names.
Inputting that information made my 3g connection start up instantly. I was able to check that things looked good by typing *#*#4636#*#* in the dialer, and looking under Phone Information.
Maybe you're a veteran CM7 user, and think this is obvious newb stuff, but I want to leave this thread here for any other users who were stuck as long as I was.
If you fixed this issue with a different method, please share what you did here. If you're a ROM/Kernel dev with more insight on anything that I covered, please comment.
Cheers.
Are you doing this on v20 baseband?
I also have trouble with data on nightly's. I know DJ posted on the cyanogen forum today, saying Adam got a new Sim (128k, the ones causing problems) for testing. There should be a fix soon, fixing this problem.
Sent from my LG-P500 using Tapatalk
Paulenski said:
Are you doing this on v20 baseband?
Click to expand...
Click to collapse
Yes. Is your carrier's APN information available to try all that I wrote above?
bambu85 said:
Fixing mobile data (3g) after installing Cyanogenmod 7 (nightly)
Hello all. I'm writing this as a long-time lurker and custom ROM / kernel user, who has been helped along greatly by this forum.
I had a long-standing issue that I couldn't find any clarity on: my mobile data access didn't work after switching to custom Roms/Kernels from LG's original Froyo Rom.
After months of thinking it was just an odd bug, and something to live with (since I rarely use data), I decided to look a little deeper into the problem. I found it difficult to even find information on the problem - there's a lot of bad information, and a lot of hard-to-read information from friendly, but not perfectly fluent English speakers.
In short, I'm hoping that others who are struggling with this issue will find this post with some Googling, and won't have to be as confused as I was.
After doing the following, I have everything working perfectly and here's how I did it:
1) I knew that the right baseband (under About Phone, in Settings) had something to do with mobile connections, including 3g data authentication and transfer. I found that v10 (and older) basebands are considered the 'old' baseband, while v20 basebands are considered 'new' basebands.
2) Cyanogenmod often reports the baseband incorrectly, so finding out what baseband you're on is unreliable through the About Phone menu, if you're already on CM7.
3) There are some scary sounding techniques to update your baseband (one involves using a poorly documented program called 'LGMDP-v1.5.exe'). These techniques can apparently brick your phone, so I avoided them. I might be wrong on some of the details here, so let me know!
4) I instead obtained the latest baseband by simply letting the LG update software (in my case from LG.ca) update my phone to Android 2.3. I noticed that I now had baseband v20. My mobile data worked!
5) I then re-rooted the phone, using SuperOneClick.
6) Installed the latest CM7 nightly. Mobile data no longer worked
6.5) I should mention, I tried other ROM/Kernel combinations and ended up having crashes and hangs on boot - thankfully I could use 'adb reboot recovery' to get back to Clockwork Recovery, when even holding various keys on reboot to do this didn't work).
7) Installed the wonderful ta-gb 1.1 kernel (thanks to all of the devs who worked on this and others like it).
8) And lastly (and possibly most importantly) I came across this:
https://github.com/CyanogenMod/andr...gingerbread/prebuilt/common/etc/apns-conf.xml
It's a list of APN information, which corresponds to different carriers, and appears to be necessary for mobile data connections. My carrier (Koodo) was not listed here, and therefore appears to not be included in even the latest Cyanogenmod 7 (as of Feb 2012).
9) This led me to find this: http://code.google.com/p/cyanogenmod/wiki/APNlist
Which happened to include the APN information for my carrier that I needed to put in, under Mobile Networks > Access Point Names.
Inputting that information made my 3g connection start up instantly. I was able to check that things looked good by typing *#*#4636#*#* in the dialer, and looking under Phone Information.
Maybe you're a veteran CM7 user, and think this is obvious newb stuff, but I want to leave this thread here for any other users who were stuck as long as I was.
If you fixed this issue with a different method, please share what you did here. If you're a ROM/Kernel dev with more insight on anything that I covered, please comment.
Cheers.
Click to expand...
Click to collapse
You should be able to get all your apn information from your carrier provider even if cyanogenmod doesnt have it.
Apn is nothing to do with being a veteran cm user or that, you used to always have to enter that kind of stuff in the old phones when you used g and 3g, in my case my carrier would sms me the settigs automatically, such as it still does for my nokia e63
deniso177 said:
You should be able to get all your apn information from your carrier provider even if cyanogenmod doesnt have it.
Apn is nothing to do with being a veteran cm user or that, you used to always have to enter that kind of stuff in the old phones when you used g and 3g, in my case my carrier would sms me the settigs automatically, such as it still does for my nokia e63
Click to expand...
Click to collapse
Good to know!
I have installed the nightlyfoure v3.8 and I am not getting 3g.I am getting edge connection. When I activate 3g it shows I have only gprs. I live in a place where 3g is available and I have v20g baseband.
Can you also tell us the procedure to edit/overwrite the original apns-config.xml if you did so? Thank you dude
geoemm said:
I have installed the nightlyfoure v3.8 and I am not getting 3g.I am getting edge connection. When I activate 3g it shows I have only gprs. I live in a place where 3g is available and I have v20g baseband.
Click to expand...
Click to collapse
Is your carrier listed in either of the links I posted about in step 8 or 9?
TheBlackHawkJr said:
Can you also tell us the procedure to edit/overwrite the original apns-config.xml if you did so? Thank you dude
Click to expand...
Click to collapse
I didn't edit 'apns-conf.xml', but I did find my carrier information in the link I posted in step 9) and typed it in manually into Access Point Names.
I suppose you could edit the apns-conf.xml file either in the source code, and compile CM7 yourself (time consuming). Or you could use the adb program that comes with the Android developer kit, and shell into the rooted phone (to see it, do: adb shell; cd /etc; ls). You could then probably edit it in place (might be risky), or pull the file, edit it, and then push it back with various adb commands that you can google
The code.google.com link I posted above might be the best way to request your APN details get added to the file in the next CM7 release.
bambu85 said:
I didn't edit 'apns-conf.xml', but I did find my carrier information in the link I posted in step 9) and typed it in manually into Access Point Names.
I suppose you could edit the apns-conf.xml file either in the source code, and compile CM7 yourself (time consuming). Or you could use the adb program that comes with the Android developer kit, and shell into the rooted phone (to see it, do: adb shell; cd /etc; ls). You could then probably edit it in place (might be risky), or pull the file, edit it, and then push it back with various adb commands that you can google
The code.google.com link I posted above might be the best way to request your APN details get added to the file in the next CM7 release.
Click to expand...
Click to collapse
Perfect, thanks but wait wait wait! You also faced the "not able to save APNs" problem? Also, I've just found out that my carrier (Vodafone IT) is listed among other carriers in APNlist you've linked... what's the deal?
(please be patient with me dude, I might seem really dumb but... I'm learning as I go )
My provider's APN is already added.
But sometimes, it fails to connect to DATA let it be 2G/3G.
Reboot solves it....
TheBlackHawkJr said:
Perfect, thanks but wait wait wait! You also faced the "not able to save APNs" problem? Also, I've just found out that my carrier (Vodafone IT) is listed among other carriers in APNlist you've linked... what's the deal?
(please be patient with me dude, I might seem really dumb but... I'm learning as I go )
Click to expand...
Click to collapse
Same issue.. pushed the updated apn-conf.xml to /etc but in my settings where the apns should show up do not. I also can not save the apn when i manually input it. (tmobile)
TheBlackHawkJr said:
Perfect, thanks but wait wait wait! You also faced the "not able to save APNs" problem?
Click to expand...
Click to collapse
I did not encounter this problem. Does anyone else have any input on this issue?
Thank you bambu85 I was stuck in the same situation for the longest time. I am using oxygen mod and your post helped me greatly. Data is now working! Sure the information might already be there but for us koodoers it's not so easy to decipher. Thanks
bambu85 said:
I did not encounter this problem. Does anyone else have any input on this issue?
Click to expand...
Click to collapse
Plus one when putting in the apn manually and press save it does not save it I only had this problem with new baseband ROMs
Sent from my HTC sensation 4g using Tapatalk
to be edited later
Hello m8, i got a bit biggwr problem - i sof-bricked mine phone (formating SD card on custom ROM does that)
Could i ask u for a bit of help ? I need a backup (can be fresh after install) of ROM but it needs to be made in SP Flash Tools (do it without SD card - so it will way less MB). It would be a life-rescue for me !
Canardo-JB01.002
I cooked a ROM for Coolpad 9976T: Canardo-JB01.003
This ROM:
. Is based on Coolpad official stock ROM - 4.2.036.P0.140724.9976T (Jelly Bean 4.2)
. Is flashable with custom Recovery TWRP or CWM
. Is rooted
. Has Google Play inside
. Does not contain Chinese applications
. Is bilingual Chinese/English (you can set other languages with Switch Local APP or MoreLocale 2)
. Is fast !
To flash this ROM in zip format you must use TWRP or CWM recovery.
If you are not rooted or do not have a custom recovery see http://forum.xda-developers.com/showpost.php?p=54669062&postcount=1
Of course do a nandroid backup before anything else.
Unfortunetly if you have a SIM card installed, the first time you start your new rom, it asks for your PIN code in Chinese before you switch to English. You have to blindly enter this PIN Code.
Please let me know your success or failure using this ROM : this is my first cooked ROM.
Download one of the following :
https://www.dropbox.com/s/pmizrkgati3qxxq/Canardo-CP9976T-JB01.003-4.2.036.P0.140724.zip?dl=0
https://onedrive.live.com/redir?resid=17E97F6931343029!463&authkey=!ACN84gAfAH7axt0&ithint=file,zip
https://mega.co.nz/#!fdFV2TxI!NKukdRV719d1AtLrlVRsaUY7P36KNZ58GxqxbOuutuE
Stock ROM for Coolpad 9976T
Stock ROM
Today I flashed the officical stock rom from Coolpad.
0.1 - Do a BACKUP (with your custom ROM)
0.2 - Do a BACKUP on your SD card (with Titanium for example)
1 - Download from
http://www.yulong.com/product/downlo...%89#downListUL :
- The adb device driver if you need it
- The Coolpad Download Assistant utility
- The CPB rom
Coolpad offers 2 versions of his utility : 1.85 and 1.86, I do not understand why 2 versions.
I used successfully 1.86 version.
The CPB rom comes as a 2.6 Gb rar file separated in 3 parts.
The 3 parts have stupid names after downloaded but they are really 3 parts of a "rar" file.
I have no information on .CPB file. It seems to be a proprietary format from Coolpad.
2 - Start your device in fastboot mode (called sometimes bootloader).
You need to start your phone with both buttons volume-up and volume-down.
Then the device shows 2 lines "FAST BOOTmode =>"
This mode is not really clear. It is not a standard fastboot mode, because standard fastboot utility from Google does not answer.
But this mode is fine for Coolpad Download Assistant utility.
3 - Flash your rom with Coolpad Download Assistant.
I used Coolpad Download Assistant (CDA) to flash it:
Of course do nos interrupt the process
And now tyou are the proud and happy user of a pure China phone
. No root
. China default language
. No Google Play Store
. No custom Recovery (CWM or TWRP)
. All your settings reset to factory
Probably you will want to reinstall a custom Recovery (CWM or TWRP) and root your phone.
You can look at my post #1 http://forum.xda-developers.com/showpost.php?p=54669062&postcount=1 (I will rewrite it soon to be more explicit)
3222
Yea, but i got different phone model - i know how to do it, but i dont got the files (backup of a working Coolpad 7320) ....
MaCDrG said:
Yea, but i got different phone model - i know how to do it, but i dont got the files (backup of a working Coolpad 7320) ....
Click to expand...
Click to collapse
I do not know 7320. I think you should look for a forum about your phone.
This thread is for 9976T only.
Regards
Larpoux
sd card
I can use a 128Gb sandisk sdxc card inside my Coolpad 9976T.
But l had to reformat it vfat32 instead of exfat/ntfs.
I used for this my Galaxy tab, running Aparted tool.
Maybe we can reformat the sd card with the device itself, but not sure.
recovery.img
See http://forum.xda-developers.com/showpost.php?p=54669062&postcount=1
Nice thread, it was a good choice to open one yourself.
Like you already found out, it's possible to use mSDXC-cards in almost every mSDHC-compatible device once it's formatted to FAT32.
The brand new 128 GB card is rather slow, but hey...128 GB.
It's nice to hear, that the Coolpad-tool worked for one person. Besides your success I've only heard "bad" things.
What is the stock recovery, English 3e (with the lying down android) like on the 9976A?
Regards
...on the fly with 9976A
thor2001 said:
What is the stock recovery, English 3e (with the lying down android) like on the 9976A?
Click to expand...
Click to collapse
Hello Thor2001.
Happy to see you again.
I do not know much for stock recovery 3e.
i just override it with TWRP after doing a backup of it with Easy Magic TWRP.
I have now problems with my various china smartphones to access 3g with my french operator "free.fr".
It should be OK frequence 900 Mhz.
Is there any body who has solved this problem somewhere in Europe ?
WCDMA/3G 900 should work.
There was a guy with frequency-problems, but as far as I know he couldn't get it working.
I'm not exactly sure, which country he was from. I've to read the 9976A-thread again for it.
[update]
I was @federimau:
http://forum.xda-developers.com/showthread.php?t=2724949
[/update]
Are you 100% sure, that your APNs etc are for free.fr configured or is it even unable to receive 3G?
What does the bandmode in Engineermode say?
...on the fly with 9976A
3G frequencies
thor2001 said:
Are you 100% sure, that your APNs etc are for free.fr configured or is it even unable to receive 3G?
What does the bandmode in Engineermode say?
...on the fly with 9976A
Click to expand...
Click to collapse
No, I am not sure of anything.
My various china phones can send or receive phone calls and SMS, but cannot access internet without wifi. What is strange is that my status bar shows «3g»
The only phone that I can connect to internet without wifi is my Galaxy Note 3.
Engeneer mode says that bandmodes are :
GSM MODE:
-egsm900
-dcs1800
-pcs1900
-gsm850
UMTS MODE:
-wcdma-imt-2000
-wcdma-gsm-900
I was thinking that my operatore uses 900Hz in Paris for 3g, but maybe I am wrong and he uses 2100Hz.
Frequences around the world are really a mess.
Can you try another french sim (other provider), to countercheck if it's the phone?
Your phone shows the 3G-reception in the notification-area?
You should compare the APN-settings between the Samsung Note3 and your Chinese Phones.
I'll later try to find out, what frequencies you use over there in France.
If it's 2100 MHz, it should work with the WCDMA2000, like it does over here in Germany.
Regards
...on the fly with 9976A
larpoux said:
No, I am not sure of anything.
My various china phones can send or receive phone calls and SMS, but cannot access internet without wifi. What is strange is that my status bar shows «3g»
The only phone that I can connect to internet without wifi is my Galaxy Note 3.
Engeneer mode says that bandmodes are :
GSM MODE:
-egsm900
-dcs1800
-pcs1900
-gsm850
UMTS MODE:
-wcdma-imt-2000
-wcdma-gsm-900
I was thinking that my operatore uses 900Hz in Paris for 3g, but maybe I am wrong and he uses 2100Hz.
Frequences around the world are really a mess.
Click to expand...
Click to collapse
Hi, I think this is a APN settings issue... You need to set and save manually the APNs in some cellphones.
Some chinese phones shows 3G but this not indicate you are connected to a 3G network (shows 3G always)
---------- Post added at 11:52 PM ---------- Previous post was at 11:50 PM ----------
larpoux said:
No, I am not sure of anything.
My various china phones can send or receive phone calls and SMS, but cannot access internet without wifi. What is strange is that my status bar shows «3g»
The only phone that I can connect to internet without wifi is my Galaxy Note 3.
Engeneer mode says that bandmodes are :
GSM MODE:
-egsm900
-dcs1800
-pcs1900
-gsm850
UMTS MODE:
-wcdma-imt-2000
-wcdma-gsm-900
I was thinking that my operatore uses 900Hz in Paris for 3g, but maybe I am wrong and he uses 2100Hz.
Frequences around the world are really a mess.
Click to expand...
Click to collapse
You have a GSM quad band phone. If you set and save the correct APN you should get 2G internet signal, and/or 3G data connection if the frequencies are the same
federimau said:
Hi, I think this is a APN settings issue... You need to set and save manually the APNs in some cellphones.
Some chinese phones shows 3G but this not indicate you are connected to a 3G network (shows 3G always)
If you set and save the correct APN you should get 2G internet signal, and/or 3G data connection if the frequencies are the same
Click to expand...
Click to collapse
thor2001 said:
You should compare the APN-settings between the Samsung Note3 and your Chinese Phones.
Click to expand...
Click to collapse
Yeah!!! :good:
You was both right, my friends: my problem with my china phones was the APN setting.
(My Samsung was from my operator so the APN was OK)
In fact I did not realize that I can add new APN with the menu button.
Thank you so much. Now I can sell my Galaxy Note 3 : its size seems so ridiculously small :laugh:
My next goal, now is to build a zip file containing the stock rom, in a format .zip that I can load with TWRP recovery, if I need one day restore the original ROM. Is there anybody who understand what are those .CPB files ?
Do you think I need to start with this .CPB file to build my ROM.zip or I need to start from a fresh installed phone with the stock ROM ?
Thank you again my friends Thor2001 and Federimau
@larpoux
As far as I know, CPB is a proprietary fileformat only to be used with Coolpads CDS.
I've just downloaded/installed the rabbit-tool, because the newest v102-firmware for 9976A doesn't like vroot anymore. It's just a backup-plan, because I rooted through autoCWM with CFs UPDATE-SuperSu.zip.
Does "Easy Magic TWRP" work with the 1920x1200-resolution?
Had some problems some months ago and stayed with autoCWM.
Does the trick for my 9976A.
Good luck
Regards
thor2001 said:
@larpoux
Does "Easy Magic TWRP" work with the 1920x1200-resolution?
Had some problems some months ago and stayed with autoCWM.
Regards
Click to expand...
Click to collapse
Easy Magic was fine for me.
At the beginning of the process it shows a popup message with the correct resolution 1920x1200
The only problem, is that it could not download the recovery.img that he created to the device.
After half an hour doing nothing I aborted the process.
But he had created correctly two files into two directories :
- The new recovery file with TWRP
- The backup of your actual recovery of your device
Then I copied myself the recovery.img to my device, and I used mobileuncle to flash it.
Note: Today Aug 19th : I redid the entiere process and this time Easy Magic TWRP was able to flash directly the Custom Recovery without having to copy myself the file to the device and flash it with Mobileuncle. Much simpler . I do not understand why it was not correct the fist time.
I am very happy now with my TWRP recovery.
Stock ROM
See http://forum.xda-developers.com/showpost.php?p=54919822&postcount=18
Hi, Can you pls share your experience with this 9979T?
Hi,
I'm interested in this 9976T, but afraid from low quality. currently I use LG G2
1. did the update brings KitKat 4.4 version? if not, do you expect for original update or XDA 4.4 rom?
2. How long the battery lives? does it hold for one day easily?
3. How is the screen brightness? sharpness? can you compare to LG G2?
4. How is connectivity? clear sound to you and the other side? how does the speaker? does BT strong? How is WiFI?
5. Do you recommend this phone or Huawei x1 is better?
thx
Hello MosheDrori
MosheDrori said:
1. did the update brings KitKat 4.4 version? if not, do you expect for original update or XDA 4.4 rom?
Click to expand...
Click to collapse
I do not think that actually there is any KitKat rom available.
My project is to build a AOKP or Pacman ROM running KitKat, but I cannot guarantee that I will succeed
MosheDrori said:
2. How long the battery lives? does it hold for one day easily?
Click to expand...
Click to collapse
I have not measured the battery live, yet. But I haven't see any problem in this area.
I do not use daily this phone, because I use it only for Android study.
It can live several days in sleep mode, with a SIM card activ.
I will measure carefuly the battery later, when I will have finished building my custom ROM.
MosheDrori said:
3. How is the screen brightness? sharpness? can you compare to LG G2?
Click to expand...
Click to collapse
I cannot compare with LG G2.
My own appreciation is that the screen is really beautiful.
A lot better than many china smartphones that I had.
MosheDrori said:
4. How is connectivity? clear sound to you and the other side? how does the speaker? does BT strong? How is WiFI?
Click to expand...
Click to collapse
The sound seems good for me.ItI can compare with my Galaxy note 3.
And it is stereo ! (The Note 3 is mono)
The loudspeakers are located in each side, not in the back.
This is very convenient in landscape mode when you look to a movie
MosheDrori said:
5. Do you recommend this phone or Huawei x1 is better?
thx
Click to expand...
Click to collapse
I do not have yet a large experience on this phone.
But I love it so much that I ordered a second one to develop on it.
The size is for me amazing.
It is as if you have at the same time a tablet and a phone.
Now I cannot live anymore with my Note 3, because it seems too small (5.6 inches).
Maybe you can ask for feedbacks on 9976A thread. This phone is very close to the 9976T and there is some nice people who will answer.
(Here I feel pretty much lonely)
Hey everyone. redoing my thread now that we have tried alot of solutions, hopefully someone has a vague idea of what we can do to my phone lol.
So then, my phone (redmi note 3 snapdragon) refuses to go into deep sleep no matter what combination I've tried.
Tried Combos
1. RR+ radon and agni
2. Miui 8 stable and dev preview (7.1.5 and 8.1.1.0)+ stock, radon, and neon kernel (flashing using miflash with unlocked bootloader official)
3. Cm13 latest nightly+ radon, stock, and agni
4. Nitrogen os+ nagato kernel (current rom)
All combinations we're tried with clean installs (factory data, system,cache and internal storage)
Hardware methods tried
1. Physically disconnecting fingerprint sensor (goodix)
now then, with wakelock detector, we can see im troubled with a 99% awake time, along with 100,00's of event wakelocks over 6hours, now event wakelocks deal with the actual hardware of the phone from what i've seen, which makes little sense to me because the screenshot i am attaching was just over an entire night of not touching the phone. so why it has any activity is bizarre to me. so heres what we have tried so far on my previous thread.
Tried methods of fixing event wakelocks
1. Greenify, force doze, wakelock blocker and blocking everything in frustration. deep sleep battery saver.
2. physically deleting events one by one (going into dev/input/eventx (x being wakelocks 1-10) after deleting some my display eventually stopped working, most likely because i just deleted the event that controls the lcd i assume. rebooting fixed the problem and remade the events in their directory so no harm done.
3. removing zram usage figuring it was a thrashing problem (saw a thread in the hd desire of the same issue. didnt help sadly.
4. flashing modem in radon thread, ended up making my phones earpiece not work for calls and still had the wakelocks.
5. disabling gps, along with auto brightness and auto rotate
so then if anyone needs any other information just let me know, currently using an iPhone for the time being so im desperate lol. but still id rather fix and find the problem then go for returning the phone. better to solve a problem for future people in my shoes then just thrust it away is how i see it. also someone bug the strix and darkstrix about this maybe they know the solution. anyway thanks for reading and i hope we can fix my phone soon
^Update^ now using epic rom 7.1.12 from the xda thread, still got wakelocks on stock without any other apps.
I have same problem in all versions of stock MIUI Rom. I too tried all sorts of combination but the problem remains. Finally I'm using RR Rom 5.7.4 (20161113 build) + radon Kernel. My deep sleep problem have been solved (though not 100%). Now my phone looses very little battery in standby time like 1-2% over a night. Before RR Rom I tried many custom Rom but had same problem. If you have not tried the ROM (RR Remix 20161113) I've mentioned above give it a try. Best Of Luck.
Thanks rj I'll install and post logs after work. Fingers crossed that it fixes my problem.
use the rom android 6.0.1 with module powernap , u can fix it !!
http://repo.xposed.info/module/net.jzhang.powernap
Small update: testing stamina mod currently with xposed. ressurection remix will be next only because xposed seemed a bit easier lol
Well damn :/ tried RR rom and still nothing sadly, also powernap with RR didn't do anything as well. both were tried with radon and agni kernels
Then once try nexus rom i am getting good battery life in this rom too.
rjrulz007 said:
Then once try nexus rom i am getting good battery life in this rom too.
Click to expand...
Click to collapse
surer rj which one?
Having same problem.. Battery is draining very fast in idle mode.. Deep sleep is not working in any rom.. Something is keeping cpu awake.... If u find any solution then plz let me know bro.. Thanks
That happens to me when background data enabled . when i disable backround data through data usage settings , the battery backup gets better, but sure my social apps wont sync.
It seems the wakelock come from android system itself , go check logcat and you will get messages like "ANDR_PERF_RESOURCES FAILED TO APPLY PERFORMANCE" , the likes of "decided to move IRQ from cpu0 to cpu1" , and the likes of "FPC listener : waiting..." , thats all that i notice and thats happening every single milisecond on every MM roms i have tried so far....
Well when i used miui 7 LL global didnt get that much messages on logcat , but its LL ...
I guess the problem is related to source code , i dont know .
Did you try to disable fingerprint also? In many previous ROM this solved the issue.
D4xel said:
Did you try to disable fingerprint also? In many previous ROM this solved the issue.
Click to expand...
Click to collapse
yes sir still nothing
rohit4kk said:
Having same problem.. Battery is draining very fast in idle mode.. Deep sleep is not working in any rom.. Something is keeping cpu awake.... If u find any solution then plz let me know bro.. Thanks
Click to expand...
Click to collapse
hey dont worry man you'll be the first when we find an answer lol
Zaccary said:
Well damn :/ tried RR rom and still nothing sadly, also powernap with RR didn't do anything as well. both were tried with radon and agni kernels
Click to expand...
Click to collapse
Poor network signal also can cause this issue. My old carrier had crappy signal, once I switched, it increased my phone's battery since the new network has much better signal.
deltatux said:
Poor network signal also can cause this issue. My old carrier had crappy signal, once I switched, it increased my phone's battery since the new network has much better signal.
Click to expand...
Click to collapse
thanks for the tip but we are running on airplane mode only at this point just to make sure we don't have more things to worry about battery drain. i appreciate the information though ^_^
Mine kenzo, tried all miui version, always the same.
sbor-si said:
Mine kenzo, tried all miui version, always the same.
Click to expand...
Click to collapse
I'm not alone!!!
Hey hopefully we find an answer buddy
Yesterday I want to flash 7.3.2.0 xiaomi.eu version (clean install via twrp), but get bootloop. Than I flashed official global developer version (7.1.19) (fastboot via miflash, flash all), nothing better, except android system used 6%, android 39% and dex2oat 20%.
Can somebody try 7.3.2.0 version, from earlier posts is visible, that this version rocks, all later versions have issues.
sbor-si said:
Yesterday I want to flash 7.3.2.0 xiaomi.eu version (clean install via twrp), but get bootloop. Than I flashed official global developer version (7.1.19) (fastboot via miflash, flash all), nothing better, except android system used 6%, android 39% and dex2oat 20%.
Can somebody try 7.3.2.0 version, from earlier posts is visible, that this version rocks, all later versions have issues.
Click to expand...
Click to collapse
i believe last time i tried 7.3.2.0 it gave me constant reboots and lagged quite a bit. but i also heard it was the best for battery so i can try flashing through miflash again after work. im also going to be trying this rom here https://forum.xda-developers.com/re...nzo-lldlm18-1-3m866beta-real-factory-t3375250. since it uses edl mode instead of fastboot so hey maybe that will knock something lose?
Well, right now I'm trying to get it working - without luck. I can flash 7.3.2. with miflash via edl without troubles, phone started normaly, all seems good, until "No service" for gsm signal. Bad luck. I think that modem version from that old flash is not compatible with hardware.
But it looks so good - Android takes 20% and Android system 6%...
So here they are -
1. First, Is there a way to create a fastboot rom by extracting files from the device? Or you just have to download it?
The reason - As I've always found that stock roms in any phone are the most stable, and it'd be nice if we could create a fastboot rom out of it. Not to forget that we can also save a lot of bandwidth.
2. I recently tried to unlock my device and I was met with an error "wait 72 hours, use your device actively". So what rules I have to follow?
Moreover whenever I try to close my mobile connection whether through notification tab or inside settings, my device restarts.
Are these related? Though if I'm quick enough that I close internet before sim could load and show the H/LTE sign, then it doesn't restarts. But if I turn it later on and decide to shut it off, then it's bound to restart.
Was just tapping on usb tethering and it restarted, don't know if my connection went off as it rebooted very quickly, but it restarted again.
Update : Tried to switch from mobile data to wifi, still restarted. Sometimes if the sim is a little slow to connect to internet and I turn it off, then it doesn't restart either. The data got turned on later and got shut off automatically as in actuality it was off, but the phone didn't restarted then.
3. I'm having some problems with face recognition. First I registered in a dark environment, unlocked it 2/3 times right away. But when I tried later, it didn't worked several times either in dark or well lit environment. Then I installed it in a well lit environment, same thing worked 2/3 times right away, but as soon as I changed the location to dark or back to well lit, it didn't worked again. Just tried it RN, it worked several times except a few times, so what 's going on here? I'm confused.
Update : I think it's a distance issue.
4. This is a general question regarding miui. Where is the data saver (restrict background data) feature in miui? I've tried several times to find it in different mi phones. But was never able to find it. It's been here from kitkat or maybe even older, correct me if I'm wrong. So why not provide it in miui, such a feature rich rom? Is it hidden somewhere?
5. The stock rom my phone has is based on Android 8.1 (8.1.0 OPM1.171019.011) to be exact, for rom version refer to reply. I've tried different versions of gcam, but none of 'em has worked for me. Normal camera app works fine, nothing I've encountered yet.
These are the versions I've tried -
* F1v9.5_6.2.030.apk (Couldn't install as 6.2 is only supported by android pie)
* MGC_6.1.021_XCAMBase_F1_v5a.apk (Installed and worked, details below)
* MGC_6.1.021_Potter_v7.1_san1ty.apk (Installed, didn't open)
* MGC_6.1.021_Potter_v7_san1ty.apk (Installed, didn't open)
On photo, the camera lags like I'm playing a game at 2-3 fps, same for other photo related options. Except for panaroma, photo sphere, lens blur, these I didin't had problem with. Except panaroma pic never showed up in camera app or gallery. In video it doesn't lag, so recording normal video was fine. But when I recorded a slo mo video, it lagged after the recording, inside & out the camera app. Inside gcam the audio was fine but outside it was muffled. By outside I mean gallery app & vlc player.
I may try other versions but each app is so big.
Gurkirat_Singh said:
So here they are -
1. First, Is there a way to create a fastboot rom by extracting files from the device? Or you just have to download it?
The reason - As I've always found that stock roms in any phone are the most stable, and it'd be nice if we could create a fastboot rom out of it. Not to forget that we can also save a lot of bandwidth.
2. I recently tried to unlock my device and I was met with an error "wait 72 hours, use your device actively". So what rules I have to follow?
Moreover whenever I try to close my mobile connection whether through notification tab or inside settings, my device restarts.
Are these related? Though if I'm quick enough that I close internet before sim could load and show the H/LTE sign, then it doesn't restarts. But if I turn it later on and decide to shut it off, then it's bound to restart.
Was just tapping on usb tethering and it restarted, don't know if my connection went off as it rebooted very quickly, but it restarted again.
Update : Tried to switch from mobile data to wifi, still restarted. Sometimes if the sim is a little slow to connect to internet and I turn it off, then it doesn't restart either. The data got turned on later and got shut off automatically as in actuality it was off, but the phone didn't restarted then.
3. I'm having some problems with face recognition. First I registered in a dark environment, unlocked it 2/3 times right away. But when I tried later, it didn't worked several times either in dark or well lit environment. Then I installed it in a well lit environment, same thing worked 2/3 times right away, but as soon as I changed the location to dark or back to well lit, it didn't worked again. Just tried it RN, it worked several times except a few times, so what 's going on here? I'm confused.
Update : I think it's a distance issue.
4. This is a general question regarding miui. Where is the data saver (restrict background data) feature in miui? I've tried several times to find it in different mi phones. But was never able to find it. It's been here from kitkat or maybe even older, correct me if I'm wrong. So why not provide it in miui, such a feature rich rom? Is it hidden somewhere?
Click to expand...
Click to collapse
sir, you never mention which version you are on ? since Boot is locked so definately MIUI but which one? global/beta/Eu/ Stable/chine etc?
anways..
Answer for 1, - No you have to redownload it, the Fastboot Rom consist of few extra files like persist and recovery and if they are update you must use the latest one. however via twrp you can take system/data/ and other partitions backup if you want...
for 2. after 72hours, goto dev option and try enabling oemunlock, it will give you warning but do it, come out of dev option and go in and do it again, repeat until the UNLOCK setting stays on UNLOCK, (don't know why it is, but this is how it is,,,, ) , later verify your miui account and sim, keep signed in. download unlocker and sign- in and try unlocking the device (make sure all qualcom drivers are installed)
for 2 again, This is very strange, ONE OF ITS KIND error I AM hearing , I honestly thought this bug is ONLY custom rom related! , you see Poco f1, Beryllium uses MODIFIED VENDOR IMAGE ( can be found at) https://mirror.akhilnarang.me/MIUI/beryllium/.
now these modified vendor images by MIUI dumps logs on data/data/netstat (specially if you are USB TETHERING on 3g, ... you will start suddent System UI reboots and some com.android.xyz processes crashing errors and if you toggle Airplone mode 3g/4g or usb tethering from quick setting , device either hung or system ui restarts or device reboots.
now this error is always in all custom roms due to vendor image
solution? DELETE all files from data/data/netstat and reboot (rooted device on custom rom)
for locked device (unrooted) you may have to flash updated version of miui to fix this bug!
Once you unlock device take latest vendor image ( i am using 9.6.27.9-0 , it has better battery life) and flash custom rom...
for 2 again,,,, some users are complaing that miui10.3.6 alters fastboot commands! and twrp no longer works! , make sure you don't flash miui10.3.6,
for no3,, i don't use facial unlock feature, i will study more and will get back to u if relevent.
for 4
Open MIUI Security App.
Tap on Data Usage Tool.
Tap on Restrict Data Usage.
Now find out those data hunger apps and restrict them by tapping on the green tick.
@YasuHamed First of all big thanks for such a descriptive answer.
1. Now, I'm on stock miui rom i.e. MIUI global stable 9.6.14.0(OEJMIFD).
So If i haven't updated my rom in any way what so ever. can I create a fastboot rom out of it? If I can then also, will that fastboot rom have all the system settings I have on my phone right now? Or will they be default?
2. While not exactly as you said but something similar happened. I do remember enabling the option of oem unlock, but it was turned off. It didn't gave any warnings, so I enabled it multiple times maybe 4, then on the 4th time it showed me a warning and after that it was enabled permanently, even after several boots and reboots.
IDK which "unlock setting" do you mean, which has to say unlock? Is it something different than I mentioned here or are you talking about Mi unlock status, cause I already tapped the 'add account and device' option in it.
Yes really strange indeed. I'm just worried that my hardware isn't damaged? Cause I just got the phone 2 days ago and if it's only a software thing then it's fine. As I'm sure installing/flashing rom would fix it! But I can't RN as you know the time period. Why am I worried? I took my phone to a mobile shop to put lamination on it asap as to avoid any scratches. As you may know that they use heat gun, to do it properly around the curves, I'm just getting a little worried that it damaged my phone's hardware, please give me hope.
Some other strange things happened as well. After some reboots, when I went into file manager app, it would open showing previews etc. but as soon as I click on storage/folders, it says "disconnected" and later I get a message "couldn't add error 10000" like after 10-15 seconds, as I vaguely remember. But after some reboots it would work just fine so IDK what's going on.
3. I also think it's about the experience. More I used it, I think infrared illuminator doesn't throw rays too far, so you have to keep your face a little close.
4. Thanks I found it. But I don't think it is very effective, feature wise. And I also think it isn't working that well RN as it keeps showing the data usage as 0, maybe cause of the bugs? Also the features like restricting data etc for individual apps is good but if you have to restrict background data for each &very app, you have to do that individually. Though if i restrict data, can an app still use background data? As they are different menus. Also it doesn't show usb tethering or hotspot data or anything like that in the list.
Check my 5. question.
Gurkirat_Singh said:
@YasuHamed First of all big thanks for such a descriptive answer.
1. Now, I'm on stock miui rom i.e. MIUI global stable 9.6.14.0(OEJMIFD).
So If i haven't updated my rom in any way what so ever. can I create a fastboot rom out of it? If I can then also, will that fastboot rom have all the system settings I have on my phone right now? Or will they be default?
2. While not exactly as you said but something similar happened. I do remember enabling the option of oem unlock, but it was turned off. It didn't gave any warnings, so I enabled it multiple times maybe 4, then on the 4th time it showed me a warning and after that it was enabled permanently, even after several boots and reboots.
IDK which "unlock setting" do you mean, which has to say unlock? Is it something different than I mentioned here or are you talking about Mi unlock status, cause I already tapped the 'add account and device' option in it.
Yes really strange indeed. I'm just worried that my hardware isn't damaged? Cause I just got the phone 2 days ago and if it's only a software thing then it's fine. As I'm sure installing/flashing rom would fix it! But I can't RN as you know the time period. Why am I worried? I took my phone to a mobile shop to put lamination on it asap as to avoid any scratches. As you may know that they use heat gun, to do it properly around the curves, I'm just getting a little worried that it damaged my phone's hardware, please give me hope.
Some other strange things happened as well. After some reboots, when I went into file manager app, it would open showing previews etc. but as soon as I click on storage/folders, it says "disconnected" and later I get a message "couldn't add error 10000" like after 10-15 seconds, as I vaguely remember. But after some reboots it would work just fine so IDK what's going on.
3. I also think it's about the experience. More I used it, I think infrared illuminator doesn't throw rays too far, so you have to keep your face a little close.
4. Thanks I found it. But I don't think it is very effective, feature wise. And I also think it isn't working that well RN as it keeps showing the data usage as 0, maybe cause of the bugs? Also the features like restricting data etc for individual apps is good but if you have to restrict background data for each &very app, you have to do that individually. Though if i restrict data, can an app still use background data? As they are different menus. Also it doesn't show usb tethering or hotspot data or anything like that in the list.
Check my 5. question.
Click to expand...
Click to collapse
sir Gurkirat_Singh
1. sir you are on Miui9.6 which is based on oreo.I have personally updated till 10.0.03 and have all the fastboot command working fine.
you may download miui9.6.22 (a bit updated version from what you are currently on) from
http://en.miui.com/thread-3995650-1-1.html ( both Recovery (1.6gb) & Fb rom (2.5gb) as backup.
2. under Developer options , poco f1 has this trick that OEM UNLOCK doesnt stick on UNLOCK and keeps coming to default once after you exit Developer option. on my 5th attempt it finally stick to UNLOCK and i was able to unlock the device from unlocker Tool.
3. I havent removed my poco sticker from back (yet), put 9h class, bought extra skin my self and book cover too so yes I second that. I always protect my devices like part of me , even the retired ones are sleeping in boxes with proper covers and unused accories!,
now, update your rom and try again to toggle 3g/4g usb tethering. 99% chances are its software issue! and i have faced this issue many times and its my 5th month with device so i havent noticed any hardware damage or performance / speed problems yet... so don't worry. YES few kernels affect network connectivity, however I am on Optimus Drunk kernel on Havoc 2.8 and its working like a charm!
-about file manager issue, can you try the same with FX File Explorer? and report back plz
4.if you restrict globally then miui will only allow system apps to use data in background as and when needed. MIUI won't allow facebook/whatsapp and other VOIP callers to work in the background. Once in restricted mode on miui9 on RN5pro, I used to miss call on whatsapp unless i wake the device up and notifications starts appearing that i have many whatsapp miss calls!, this feature went even worse on rn5pro when i was on dual sim, miui use to prefer carier sim over data sim always! so yes miui has strict data usage control.
5. i am unable to find 5th question plz help
few screen shots of my poco f1 on HAVOC2.8 / OD kernel build20190820 / magisk19.3 / gapps nano
@YasuHamed
1. I didn't got the answer to my question, please read my question again.
2. I'm gonna assume you mean 'oem unlock' got enabled and I'd be able to unlock after 72 hours are over.
2. a. I hope so as well, thanks again.
Although sometimes it would run fine and even after turning off mobile data, wifi, usb tethering etc. it won't restart. I thought the oem unlock setting helped but when I tried not an hour ago, it restarted. Same thing with file manager, it's working fine now, I'm sure 3rd party file managers would work fine as well. Only a few times, it showed that 'disconnected' error.
4. I guess I'd just have to hit and trial myself.
5. Check my OP (original post).
Gurkirat_Singh said:
@YasuHamed
1. I didn't got the answer to my question, please read my question again.
2. I'm gonna assume you mean 'oem unlock' got enabled and I'd be able to unlock after 72 hours are over.
2. a. I hope so as well, thanks again.
Although sometimes it would run fine and even after turning off mobile data, wifi, usb tethering etc. it won't restart. I thought the oem unlock setting helped but when I tried not an hour ago, it restarted. Same thing with file manager, it's working fine now, I'm sure 3rd party file managers would work fine as well. Only a few times, it showed that 'disconnected' error.
4. I guess I'd just have to hit and trial myself.
5. Check my OP (original post).
Click to expand...
Click to collapse
sir
1. I never read any such method so far where you can reverse engineer the extracted files in partitions and pack them back as fastboot rom. and to think of it thats almost impossible because stockroms usually comes with digitally signed by vendors ensuring no foul play.
2. once your 72hrs over, just unlock the oem unlock switch from Dev option, verify sim of on your mi account, download the unlock tool, login using same mi account, hit unlock, after success, the device will BOOT on POCO logo and "UNLOCKED" will start appearing (always) and all data partition, internal storage will be wiped! so make sure you take backup!
2a. with me on custom rom it wasn't a sure thing but it used to happend randomly when least expected.
5. on oreo , GCAM version came in sep2016 worked for me and later ones are for pie and kept crashing (please check old version on apkmirror)
@YasuHamed Thanks for all the help.
5. I did found a version that is working fine for now. But the features I was interested in was super res zoom, night mode, slo mo etc. Super rez wasn't that impressive(seemed similar to stock zoom), night mode either, slo mo still doesn't work properly and phone heats up, even when I'm not using too old of a version of gcam. Even the stock cam app took some good shots with zooming.
And if those features will work better with pie version then IDK what to say cause that new version would come with better stock cam having slo mo, night mode and all that shiz if not everything. So I'm kinda thinking is this gcam port really relevant? It drastically changed image quality with my RN3 but I don't see that now.
Edit: Also I wanted to say that my phone was working fine now i.e. no reboots after closing mobile data or wifi or switching. But you know what they say don't celebrate too soon. As soon as I used usb tethering the problem arised again, I wasn't able to it for 2 days as my PC wasn't booting. Same reason why I wasn't able to reply to you earlier.
Not only this, this whole bugged situation has started to irritate me a lot. Just today I was trying to run flash on my android. And even on the supported browser, it just wouldn't show up. I really hope after I unlock this device, all of these bugs would go away after the data gets deleted, or I'm gonna be more disappointed.
@YasuHamed This has really started to piss me off now. It has started again.
While IDK if the camera or flash not working properly are related to this whole bugged system or not. But I guess usb tethering is the trigger to this whole thing. Everything was working fine, it started to record the mobile data usage, didn't turned off when turned off the mobile data and even worked when I used usb tethering, but suddenly it reboots and the whole **** show all over again. I'm really pissed now. Oh btw it started showing 0 data used AGAIN.
Gurkirat_Singh said:
@YasuHamed This has really started to piss me off now. It has started again.
While IDK if the camera or flash not working properly are related to this whole bugged system or not. But I guess usb tethering is the trigger to this whole thing. Everything was working fine, it started to record the mobile data usage, didn't turned off when turned off the mobile data and even worked when I used usb tethering, but suddenly it reboots and the whole **** show all over again. I'm really pissed now. Oh btw it started showing 0 data used AGAIN.
Click to expand...
Click to collapse
please consider upgrading to MIUI10.3.x , download the complete recovery rom and name it as update.zip and put it in download folder and open updater and call the rom from there , and flash it, I suggest CLEAN FLASHING so all the data will be deleted!
plz take backup!
@YasuHamed can you please find me fastboot rom for miui 9.6.14(OEJMIFD), I tried but I couldn't find it. I'd do the full clean flash through edl mode. That would resolve any bugs related software, right?
Come to think of it, why did this all started happening at the first place? As I remember, it all started after a failed attempt to unlock, I mean not fail fail, I just had to wait before I could do so. Do you see any patterns?
Also if you know anything in this regard, did the stock rom (9.6.14) had such problems back in the day?
Gurkirat_Singh said:
@YasuHamed can you please find me fastboot rom for miui 9.6.14(OEJMIFD), I tried but I couldn't find it. I'd do the full clean flash through edl mode. That would resolve any bugs related software, right?
Come to think of it, why did this all started happening at the first place? As I remember, it all started after a failed attempt to unlock, I mean not fail fail, I just had to wait before I could do so. Do you see any patterns?
Also if you know anything in this regard, did the stock rom (9.6.14) had such problems back in the day?
Click to expand...
Click to collapse
frankly i never used my poco on miui either on 9 nor on 10 ,
the day I got, I placed unlock request and after 3-4 days, I unlocked my device and put it on HAVOC and since then my experience is based on custom roms but i did flash miui 10 in between just to have a taste of it! and came back to havoc in a day or two, hence i never deeply tested these feature.
however I do know that modified vendore have created usb tethering problems throughout devices
https://mirom.ezbox.idv.tw/en/phone/beryllium/roms-global-stable/
@YasuHamed I don't think mine contains modified rom. As I went ahead and checked all the possibilities like using cn as in china in the codename of a global rom, updates are also working. I even went ahead to check the authenticity of my device. It checks out with some other things on the box as well. So I'm 100% sure, that this has got nothing related to that.
Some other things which I tried in the meantime. I wanted to test if I can run tegra games on this device. So I installed gltools and build prop. Gltools to make the app believe that my device has the gpu it's looking for. Build prop to make app believe I have the device on which this is supposed to run. But I ended up with the same results. So IDK what I did wrong there? In this regard I wanna ask that, is it possible for root checker to show your device is rooted when in fact its not properly rooted.
Why am I asking this? Cause while going through rooting procedure I skipped a few steps like not flashing 'disable force encryption treble' which I did notice after unlocking, during first boot, the device did do some encryption. I skipped that step cause of something mentioned on this link https://twrp.me/xiaomi/xiaomipocophonef1.html regarding dm verity, but as I just checked the same is mentioned regarding rn3 so IDK what to make of this now, but what I did is not 'swipe to allow modifications' and click on 'read only' in twrp recovery and it did rebooted to recovery properly. As mentioned in the link that some system could force to flash stock recovery. Other than that, not factory resetting, data wiping after root, but does it really matter that much?
I can hear you say that dude you're playing with your device too much, of course it's gonna have these problems. To that, I say I didn't do anything like this, prior to unlocking but the problems were still there if not all of them. So what is the root cause of this then? Do I really need to take it service centre to get it checked out or just flashing the rom through edl mode would fix this?
Not just that after I made those changes in build prop(not including gltools) something very weird/interesting happened. If I would restart my device the boot logo shown is poco but the boot splash is mi logo. And when it rebooted after closing the internet, it would only show the mi logo but then I remember that it must've been soft(hot) reboot as it only shows boot splash.
Not only this, after rebooting the style of the rom changed as well. The icon on the home rearranged themselves a bit. So instead of seeing 5 icons in a row, it was all 4 icons on home as well as on app drawer. As you may know Kika keyboard is defaulty present in this rom but after the build prop modifications, whenever I lock my device and wake it up it started showing ads sometimes, maybe the same ad everytime IDK.
Another thing as you know there is an option of reboot to recovery under about phone updates. When I did that that it showed the 'android' logo. I tried it again but it kept showing the loading sign only.
Also how did you find these files? Thanks again m8. You know just for reference if I'd have to find them myself. Also what are those that say (rolled back).
Gurkirat_Singh said:
@YasuHamed I don't think mine contains modified rom. As I went ahead and checked all the possibilities like using cn as in china in the codename of a global rom, updates are also working. I even went ahead to check the authenticity of my device. It checks out with some other things on the box as well. So I'm 100% sure, that this has got nothing related to that.
Some other things which I tried in the meantime. I wanted to test if I can run tegra games on this device. So I installed gltools and build prop. Gltools to make the app believe that my device has the gpu it's looking for. Build prop to make app believe I have the device on which this is supposed to run. But I ended up with the same results. So IDK what I did wrong there? In this regard I wanna ask that, is it possible for root checker to show your device is rooted when in fact its not properly rooted.
Why am I asking this? Cause while going through rooting procedure I skipped a few steps like not flashing 'disable force encryption treble' which I did notice after unlocking, during first boot, the device did do some encryption. I skipped that step cause of something mentioned on this link https://twrp.me/xiaomi/xiaomipocophonef1.html regarding dm verity, but as I just checked the same is mentioned regarding rn3 so IDK what to make of this now, but what I did is not 'swipe to allow modifications' and click on 'read only' in twrp recovery and it did rebooted to recovery properly. As mentioned in the link that some system could force to flash stock recovery. Other than that, not factory resetting, data wiping after root, but does it really matter that much?
I can hear you say that dude you're playing with your device too much, of course it's gonna have these problems. To that, I say I didn't do anything like this, prior to unlocking but the problems were still there if not all of them. So what is the root cause of this then? Do I really need to take it service centre to get it checked out or just flashing the rom through edl mode would fix this?
Not just that after I made those changes in build prop(not including gltools) something very weird/interesting happened. If I would restart my device the boot logo shown is poco but the boot splash is mi logo. And when it rebooted after closing the internet, it would only show the mi logo but then I remember that it must've been soft(hot) reboot as it only shows boot splash.
Not only this, after rebooting the style of the rom changed as well. The icon on the home rearranged themselves a bit. So instead of seeing 5 icons in a row, it was all 4 icons on home as well as on app drawer. As you may know Kika keyboard is defaulty present in this rom but after the build prop modifications, whenever I lock my device and wake it up it started showing ads sometimes, maybe the same ad everytime IDK.
Another thing as you know there is an option of reboot to recovery under about phone updates. When I did that that it showed the 'android' logo. I tried it again but it kept showing the loading sign only.
Also how did you find these files? Thanks again m8. You know just for reference if I'd have to find them myself. Also what are those that say (rolled back).
Click to expand...
Click to collapse
-sir, most of your observations are pertaining to V9.6.14.0.OEJMIFD, where I am not on MIUI hence I will wait for other members to step in and share their views about them.
- you can always use "Disable-Force-Encryption-Treble" from https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389, when flashing rom (clean flash, FORMAT DATA) to disable encryption on kernel level.
- since Twrp official doesnt support OTA so if you call recovery from updater, it wont work! you may have to use Orange Fox (oct/nov2018) version which had OTA support or better flash full rom after downloading desired version from https://mirom.ezbox.idv.tw/en/phone/beryllium/roms-global-stable/
- what are you looking is from different world of android devices, such as TEMP ROOT, IVORY ROOT (sony xperia on android 5.1) days only! when nothing used to be changed but just to gain access of certain partition temporarily, temp root techniques used to apply to extract DRM KEYS. ITs not the case here hence you will have to root your device properly!
- about gpu, i never tried but you can used app such as FK kernel manage or Kernel Auditor to play with your GPU accordingly
- twrp usually ask keep system readonly whenever flashed new room its standard warning to avoid any bootloops since Twrp doesn't know you will be flashing kernel and/or disabling dm varity soon. so it warns you.
- don't worry POCO is FREE from ARB4 $hit so when page said ROLLED BACK, it means those version were recalled back for some buggs and an update released soon after!
@YasuHamed So IDK whether I was clear or not, cause I couldn't understand most of the answers you gave me, maybe they got mixed up, IDK. Anyways I'll try to keep it simple and answer in best way possible and keep it organised so there's confusion.
1. Thing I forgot to mention, after flashing 'disable force encryption treble' file, my root stopped working, I thought it was part of the whole bugged system. In actuality, when I checked the steps while it was flashing, it installed Magisk 16.7, I think. That's why root stopped working. After flashing latest Magisk, it worked fine. So, After flashing "disable" file, Can I flash Magisk over it to get the latest Magisk version? Will it affect the disabled function in any way? Currently I have 3 files, which one do you suggest -
Disable-Force-Encryption-Treble.zip
DisableForceEncryption_Treble_v18.0.zip
Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
Third one is form the link you provided.
2. DK if TWRP supports OTA, but I was able to boot to TWRP after tapping on reboot to recovery, just saying. By full rom do you mean the stock roms?
3. Did you meant if it checks out in root checker, then it's properly rooted already!?
4. This FK Kernel Manager or Kernel Auditor, you talk about, does it works the same way as Build Prop or GLTools? Cause I'm not an expert in using these tools. I just followed the steps mentioned in this video https://youtu.be/Y1wPIHhM1Yw similarly for the other games I was trying to run by gathering build prop info related to shield tv/tablet/portable but it didn't worked in my favor.
5. So if you chose the option of 'swipe to allow modifications' options instead of 'read only', and your phone boots without any bootloops or anything, as I've done a lot of time on my RN3 without even thinking about it, does that mean that everything's fine? Even when you haven't disabled dm-verity and still are on stock kernel(the one contained in stock roms i think). Does stock kernel changes to custom when you flash a custom rom? Does TWRP makes any changes to stock one if your system boots without any above mentioned problems having stock rom? Any details regarding differences in these two options?
6. When you say an update released soon after? Do you mean same versions were released with bugs fixed or a new/next version was released? In other words, is it ok to try these versions with such bad bugs that they were called back? Were those system breaking bugs fixed in the same version? Also again, I'd really appreciate if you could tell me how'd you find these roms?
7. I'm almost certain that usb tethering is the trigger to these reboots when turning off internet. Cause if I power off the device and turn it on later, then turn on-ff data, it doesn't reboot but sometimes it does. But as soon as I turn usb tethering on, it would reboot and the whole debacle starts again. And the ads kika shows are different along side something related to ram cleaner everytime. So I think it does uses internet. IK you don't use miui, just putting the info out there, if someone thinks of stepping in later.
please view my replies sir
Gurkirat_Singh said:
@YasuHamed So IDK whether I was clear or not, cause I couldn't understand most of the answers you gave me, maybe they got mixed up, IDK. Anyways I'll try to keep it simple and answer in best way possible and keep it organised so there's confusion.
1. Thing I forgot to mention, after flashing 'disable force encryption treble' file, my root stopped working, I thought it was part of the whole bugged system. In actuality, when I checked the steps while it was flashing, it installed Magisk 16.7, I think. That's why root stopped working. After flashing latest Magisk, it worked fine. So, After flashing "disable" file, Can I flash Magisk over it to get the latest Magisk version? Will it affect the disabled function in any way? Currently I have 3 files, which one do you suggest -
Disable-Force-Encryption-Treble.zip
DisableForceEncryption_Treble_v18.0.zip
Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
Third one is form the link you provided.
I flashed "DisableForceEncryption_Treble_v18.0.zip" and it worked/works, but I always flash before magisk., the current version is Magisk19.3 hence I recomend you to use the updated version, 16.7 is obsolete long back. However if 19.3 may give you bootloops then the max you can go back is Magisk18.0 (since after 18.1, Magisk started using different Script language unknown to some recoveries. However if BOTH (your recovery and Magisk are latest, it should work just fine
2. DK if TWRP supports OTA, but I was able to boot to TWRP after tapping on reboot to recovery, just saying. By full rom do you mean the stock roms?
once on RN5p I tried updating OTA via twrp, it never booted to update hence I recomend you to download full recovery rom 1.8gb, of the build you want and flash it via twrp
3. Did you meant if it checks out in root checker, then it's properly rooted already!?
plz try any root checker and see
4. This FK Kernel Manager or Kernel Auditor, you talk about, does it works the same way as Build Prop or GLTools? Cause I'm not an expert in using these tools. I just followed the steps mentioned in this video https://youtu.be/Y1wPIHhM1Yw similarly for the other games I was trying to run by gathering build prop info related to shield tv/tablet/portable but it didn't worked in my favor.
fk kernel manager or kernel Auditor does support editing build prop, apart from many tweaks for GPU and Cores. the video shows a simple edit in order to think your device is some other version of Galaxy to trick samsung app ; however The boy didn't explain why he just didn't install the already downloaded apk file from fortnite website ?
5. So if you chose the option of 'swipe to allow modifications' options instead of 'read only', and your phone boots without any bootloops or anything, as I've done a lot of time on my RN3 without even thinking about it, does that mean that everything's fine? Even when you haven't disabled dm-verity and still are on stock kernel(the one contained in stock roms i think). Does stock kernel changes to custom when you flash a custom rom? Does TWRP makes any changes to stock one if your system boots without any above mentioned problems having stock rom? Any details regarding differences in these two options?
if you are flashing MIUI From twrp, and DON"T wana ROOT then yes you should never allow system modification because then device will never boot in to system due to DM-Verity. However if you are rooting yoru device, try reading Magisk Lines, It always patch fstab and disable Dm-verity, once its disabled /system parition permision wont be verified on boot. So when you boot in to twrp and you know you are going to flash Magisk, you can ALLOW SYSTEM MODIFICATION swip
on Custom Roms it doesn't matter, because twrp never ask such question. "allow system modification" is only limited to StockRoms
6. When you say an update released soon after? Do you mean same versions were released with bugs fixed or a new/next version was released? In other words, is it ok to try these versions with such bad bugs that they were called back? Were those system breaking bugs fixed in the same version? Also again, I'd really appreciate if you could tell me how'd you find these roms?
the next version above ROLLED BACK one is the bug fixed. (now i don't know what exactly were they) . Also MIUI forums for devices always announce updates! you can google
7. I'm almost certain that usb tethering is the trigger to these reboots when turning off internet. Cause if I power off the device and turn it on later, then turn on-ff data, it doesn't reboot but sometimes it does. But as soon as I turn usb tethering on, it would reboot and the whole debacle starts again. And the ads kika shows are different along side something related to ram cleaner everytime. So I think it does uses internet. IK you don't use miui, just putting the info out there, if someone thinks of stepping in later.
well probably this is the bug of this version 9.6.14 hence you should upgrade atleast to 9.6.20 in order to compare
Click to expand...
Click to collapse
@YasuHamed Again a little bit confused by some answers, but I'll try to keep it simple.
1. Do you mean you flash "d-f-e-t" file before magisk? That's what I was asking, does magisk interfere with the steps, this file does, in anyway? And why didn't u used the 'third file', the one from the link you mentioned, isn't that the better one in some ways?
2. I never said I tried to install an OTA through TWRP. I just said I was able to boot to TWRP through 'reboot to recovery' option under system updates tab.
3. I checked it with one 'root checker' app, do I need to check with others? Can you name some?
4. He didn't used the same apk, cause he wanted to show & tried to explain, what kind of changes we were doing to the system, rather than just blindly following the instructions, like what normally happens in these scenarios. I thought that was given, anyways, I've tried same things before in past. When I had the apk, data/obb files of an app/game, I'd simply just try to install them on miui and they'd just crash, but doing the same thing on a custom rom and it works, no special steps. Similarly did all this work, and ended with crashes, maybe I'll do the same thing on a custom rom and it'll work. On that note, do you know where I can download stable builds of lineage OS, or do I just have to research which one is a a stable version, Or is it okay to download any latest nightly builds, the only thing they post on their official website?
5. If one taps on 'read only' option the first time, and when it boots to twrp again and doesn't asks for it. Can one find that option somewhere else in twrp? I did that and still I'm booting normally, how's that possible then, if you say system won't boot!? And what does that option 'allow system modifications' do exactly? How unlocking & rooting are different, security wise? Cause vendors like Xiaomi allow unlocking officially, which means it doesn't void your warranty, though I don't know what would happen if you walk in with an unlocked device in their service centre, cause I've never done it, But they still warn you about data stealing during unlock process etc. Although if you root your device then it's out of warranty, but it's a much simpler process than unlocking. So what's the difference, is the threat real? Or is it just marketing to keep you locked in the stock experience?
6. Again you didn't tell me how'd you find those roms!?
7. It's just really random, sometimes it doesn't restart even when internet is turned off, sometimes with usb tethering on or sometimes not even connected to the pc. Kika still shows them ads, also after an app is installed/uninstalled etc. Other than those appearance changes, I wasn't also able to dial down the brightness to the very low. Whenever i did it, it restarted, camera stopped working etc. I revert the changes I did in build.prop to make it poco again, it rebooted and the boot splash was fixed, but as soon as the ui showed up, the poco launcher kept crashing. It was good that I had my apps opened in background and miui remembers them even after reboot, otherwise there would've been no way to access build.prop, so I revert it back to any shield tv/portable/tablet settings and it started working normally. Finally I've decided, I'm gonna edl flash the stock rom and report back if these bugs happen again(I hope it's only software), I downloaded 2 roms over this period of time i.e. 9.6.14 & 10.3.7.0, will try and get back to you.
Sorry for the late reply, got a little busy.
sir ..........................
Gurkirat_Singh said:
@YasuHamed Again a little bit confused by some answers, but I'll try to keep it simple.
1. Do you mean you flash "d-f-e-t" file before magisk? That's what I was asking, does magisk interfere with the steps, this file does, in anyway? And why didn't u used the 'third file', the one from the link you mentioned, isn't that the better one in some ways?
1- Yes I flashed DFET before Magisk19.3 - and why i didn't use the third file, i remember in post one user confirmed this particular one working for him (atleast) so i downloaded that one.
2. I never said I tried to install an OTA through TWRP. I just said I was able to boot to TWRP through 'reboot to recovery' option under system updates tab.
2- ideally this is the case with recoveries which doesn't support OTA, OrangeFox based on OLD version of TWRP does support OTA , I NEVER TRIED but worth reading the post. you should find it in the Poco Development section
3. I checked it with one 'root checker' app, do I need to check with others? Can you name some?
3- I use THIS ONE
4. He didn't used the same apk, cause he wanted to show & tried to explain, what kind of changes we were doing to the system, rather than just blindly following the instructions, like what normally happens in these scenarios. I thought that was given, anyways, I've tried same things before in past. When I had the apk, data/obb files of an app/game, I'd simply just try to install them on miui and they'd just crash, but doing the same thing on a custom rom and it works, no special steps. Similarly did all this work, and ended with crashes, maybe I'll do the same thing on a custom rom and it'll work. On that note, do you know where I can download stable builds of lineage OS, or do I just have to research which one is a a stable version, Or is it okay to download any latest nightly builds, the only thing they post on their official website?
4- To get general IDEA about altering Build.Prop, The video is Good! however you can not assume Samsung Modded Android over MIUI's one! also It seems the boy in the video has Android7 where Miui Poco is atleast on 8.1, there is huge difference!
The only way to find out whether any type of build.prop (EVEN ON CUSTOM ROMS) will WORK or NOT on POCO; is to Try and find out yourself.
5. If one taps on 'read only' option the first time, and when it boots to twrp again and doesn't asks for it. Can one find that option somewhere else in twrp? I did that and still I'm booting normally, how's that possible then, if you say system won't boot!? And what does that option 'allow system modifications' do exactly? How unlocking & rooting are different, security wise? Cause vendors like Xiaomi allow unlocking officially, which means it doesn't void your warranty, though I don't know what would happen if you walk in with an unlocked device in their service centre, cause I've never done it, But they still warn you about data stealing during unlock process etc. Although if you root your device then it's out of warranty, but it's a much simpler process than unlocking. So what's the difference, is the threat real? Or is it just marketing to keep you locked in the stock experience?
5- Once twrp changes the /System as writable, cannot be undone from Twrp itself - since you have magisk16.7 as you mention earlier the dm-varity is turned off and you are booting normally.
-unlocking means, your device can accept fastboot commands to Alter various Partitions developed by Third Party! /recovery /system /vendor /oem etc
-Rooting is Gaining /system access in Android OS to perform Forbiddon and/or Unsafe Commands / Apps etc
- now your question about security , i will simply say! its HIGHLY UNSECURE to unlock your device & Root it!, there is debate about SeLinux Permissions to be Permissive or Enforcing , SELinux in enforcing mode is considered to be little better and secure but Permissive mode means any command can be run even by hacker to gain your /system access ! REFERENCE
- unlocked bootloader is also very unsafe! anyone can just flash any compatable recovery and atleast WIPE your data!
HENCE this is what i say to all my fellow friends and mates in general! if you are CONCERN security privacy , NEVER ROOT your device! or keep two devices, one being as family device! for fotos, emails contacts etc! and play with the other!
- about warranty! every region has different rules! my country's Xiaomi centre doesn't cover any brick devices because here they are alreadly selling many Redmi fones on UNLOCKED mode! directly from china!
6. Again you didn't tell me how'd you find those roms!?
https://c.mi.com/oc/miuidownload/index select poco and see officially available rom
7. It's just really random, sometimes it doesn't restart even when internet is turned off, sometimes with usb tethering on or sometimes not even connected to the pc. Kika still shows them ads, also after an app is installed/uninstalled etc. Other than those appearance changes, I wasn't also able to dial down the brightness to the very low. Whenever i did it, it restarted, camera stopped working etc. I revert the changes I did in build.prop to make it poco again, it rebooted and the boot splash was fixed, but as soon as the ui showed up, the poco launcher kept crashing. It was good that I had my apps opened in background and miui remembers them even after reboot, otherwise there would've been no way to access build.prop, so I revert it back to any shield tv/portable/tablet settings and it started working normally. Finally I've decided, I'm gonna edl flash the stock rom and report back if these bugs happen again(I hope it's only software), I downloaded 2 roms over this period of time i.e. 9.6.14 & 10.3.7.0, will try and get back to you.
EDL ? you mean fastboot rom flashing via miflasher!, thats not edl! to trigger EDL you must have
1. authorized Xiaomi Account
2. back panel of poco to be opened and short test point to put device in EDL
Sorry for the late reply, got a little busy.
Click to expand...
Click to collapse
@YasuHamed
1. I tested the third file. It worked without any problems even after flashing magisk. Cause it doesn't mess or flash any magisk files, it also detects what sort of root the phone have.
3. -> 2. I used the same app to check so.
3. You mention some good points there. That's the same reason, things worked out in custom roms and not miui in my earlier experiences. As miui is heavily loaded compared to any custom rom or samsung experinece. I'll try it on other OSs and report back. On the same note, from what I've read that lineage team doesn't release stable builds or at least not anymore. I'm currently downloading pixel experience. Should I go with this one or lineage os? Is it like any other custom OS or heavily loaded like miui? Also what is the difference between PE normal vs plus vs caf? Also I'm gonna try multi rom, as it would be much better for testing.
4. (new) As you said you use havoc os or havoc kernel I think. Which other custom roms have you tried? Is havoc your favourite one? What sort of uses you make with these custom OSs, just normal daily use or something else? Or anything else you wanna share in this manner about your experience, recommendations or anything else.
5. I think I understand a bit, if I use the option 'swipe to allow system modifications' and do not root my device i.e. not flashing magisk which in turn won't disable dm-verity and then if I try to boot to system, it'll go in booloop?
IF I'm right, then what is "read only & root" vs "allow system modifications & root"? Also I have the latest magisk version. What I was trying to say, "When I flashed the 'first' file out of the three 'dfet' files, it flashed magisk 16.7 as well causing latest magisk manager to not work", which I figured out and fixed immediately.
Also when the first time I flashed twrp, only then I got these options. But later on when I flashed the fresh rom through fastboot and then the recovery I simply got booted to the main menu without getting to choose any of these options. During that, I formatted all the stuff like system, internal storage etc. which i wasn't supposed to format, cause of which I had to flash again, but I forgot to select the 'clean all' option instead of 'clean all and lock' option. So i had to unlock again and flash twrp again. But even after all that twrp remebered all the changes I made to it like time, vibration, brightness settings and again it didn't showed any of those two options. More on this in the last response.........
6. And again you gave me the link to miui's official website. I was asking how'd you find all those older roms at one place.
7. So I finally flashed miui rom today, having high hopes, which were proven to be right first then crushed down later. After I flashed the rom, I tested the heck out of it like turning data on/off, usb tethering on/off, no problem occured, didn't found any bugs except one in data usage, it was showing like 100-600gigs(I don't remember exactly) of usage, then it started showing 1300-1400gigs, but after seeing that my confidence dipped down a little.
But still I moved on and flashed twrp on it to get it rooted. After rooting everything was fine even the data usage bug also went away, then I installed gltools and I had my phone connected to pc in usb tethering, suddenly I hear a sound(it restarted<insert gta sa cj meme>) and it starts all over again. I flashed 9.6.14 ver of rom btw.
As you already know from my response above that I was only able to flash through fastboot mode and I wasn't able to get into edl mode as I read just a few hours ago that it's locked away. So my question is, is there a chance that this all could be solved if the rom is flashed through edl. As that's much more of a clean install rather than fastboot, as I mentioned twrp remembered the settings and all that shiz. Or should I just try another ver of miui I have or the custom rom I've downloaded?
Also to get into edl mode, does both of these requirements needed to be met? Or any 1 should work? :-
Authorised account - So who can get this? Is there any bypass or workaround for it?
Test Point - I don't wanna open my phone, as you know it's new & all, tho it's not a problem if there's no other way. It's just that I have some bad memories regarding test point of my beloved RN3(now dead) so I just wanted to stay away from hardware as long as possible. Is there any bypass or a workaround for it?
................................................................................................................................................................................
Gurkirat_Singh said:
@YasuHamed
1. I tested the third file. It worked without any problems even after flashing magisk. Cause it doesn't mess or flash any magisk files, it also detects what sort of root the phone have.
we i am glad , we have a winner here
3. -> 2. I used the same app to check so.
3. You mention some good points there. That's the same reason, things worked out in custom roms and not miui in my earlier experiences. As miui is heavily loaded compared to any custom rom or samsung experinece. I'll try it on other OSs and report back. On the same note, from what I've read that lineage team doesn't release stable builds or at least not anymore. I'm currently downloading pixel experience. Should I go with this one or lineage os? Is it like any other custom OS or heavily loaded like miui? Also what is the difference between PE normal vs plus vs caf? Also I'm gonna try multi rom, as it would be much better for testing.
Temporarily , LOS is suspended but even unofficial roms till mid August are very stable ! you should try! , hoever Pixel is very popular too, on deeper level what diferences you may find thats only user can discover over time. there is no direct answer to this question! LOS is driven from CynogenMod which was on AOSP wehre Pixel is CAF based, so the difference comes on Kernel Level this means CAF rom may have different Hardware performance / behaviour when compare to AOSP based roms (and vice versa). I am not sure about multirom as a daily driver, yes I would like to try for fun but wont keep it.
4. (new) As you said you use havoc os or havoc kernel I think. Which other custom roms have you tried? Is havoc your favourite one? What sort of uses you make with these custom OSs, just normal daily use or something else? Or anything else you wanna share in this manner about your experience, recommendations or anything else.
on Poco i have tried Nitrogen, Omni, MoKee, BootLeggers, CrDroid, LOS and Havoc..
BootLeggers is pretty stable rom! however CrDroid is outstanding because the developer @gwolfu is more active and releases many updates (sometimes 3-4 in a month). Crdroid has serious level of customization (dirtyUnicorn) and you can change the look of your rom in every possible way you imagine!
so the question is WHY am I on Havoc, well the simple answer is both Crdoid and Havoc Offers serious level of DU customization & variations found on deeper level. some items which crdroid doesn't offer i found in Havoc so I stick to it, moreoever I feel the font and resolution by default in havoc is next to pixel where in Crdoid you manualy have to fix (dpi and font)
now I am on havoc2.8 but I am using Optimus Drunk Kernel (which is also used by CRDROID) - the developer of havoc2.8 offers SHADOW kernel which as I said I feel is not very battery effcient (atleast for me, others can disagree)
5. I think I understand a bit, if I use the option 'swipe to allow system modifications' and do not root my device i.e. not flashing magisk which in turn won't disable dm-verity and then if I try to boot to system, it'll go in booloop?
IF I'm right, then what is "read only & root" vs "allow system modifications & root"? Also I have the latest magisk version. What I was trying to say, "When I flashed the 'first' file out of the three 'dfet' files, it flashed magisk 16.7 as well causing latest magisk manager to not work", which I figured out and fixed immediately.
-keeping system Read only OR swipe to allow /system as writable is on Recovery Level ,
- when you keep system on READY ONLY on recovery Level and later flash magisk, the module magisk modify the /system permission which twrp doesn't know!
-if you "allow system modification on twrp level the /system is now set on writable permission by twrp, and magisk is a module which is always set to alter /system partition permission irespective of Global policy on recovery level
Also when the first time I flashed twrp, only then I got these options. But later on when I flashed the fresh rom through fastboot and then the recovery I simply got booted to the main menu without getting to choose any of these options. During that, I formatted all the stuff like system, internal storage etc. which i wasn't supposed to format, cause of which I had to flash again, but I forgot to select the 'clean all' option instead of 'clean all and lock' option. So i had to unlock again and flash twrp again. But even after all that twrp remebered all the changes I made to it like time, vibration, brightness settings and again it didn't showed any of those two options. More on this in the last response.........
now this let me think a little bit, the only possible explaination (in theory) I found is
- when you flash all or clean flash all, its not necessary that /recovery partition is first erased by miflasher! and recovery.img file has many folders including setting folder! so miflasher and later by you simply there was swaping of recoveries, the Tree was always there! when you reflashed twrp! try to do this way
Code:
fastboot erase recovery
fastboot flash twrp.img
this should erase any previous left over data and settings
try and let me know!
6. And again you gave me the link to miui's official website. I was asking how'd you find all those older roms at one place.
i simply google / web search rom number with device name with code name like Miui9.6.20 fastboot download poco f1 beryllium and google suggest few popular results which usually works for me!
7. So I finally flashed miui rom today, having high hopes, which were proven to be right first then crushed down later. After I flashed the rom, I tested the heck out of it like turning data on/off, usb tethering on/off, no problem occured, didn't found any bugs except one in data usage, it was showing like 100-600gigs(I don't remember exactly) of usage, then it started showing 1300-1400gigs, but after seeing that my confidence dipped down a little.
But still I moved on and flashed twrp on it to get it rooted. After rooting everything was fine even the data usage bug also went away, then I installed gltools and I had my phone connected to pc in usb tethering, suddenly I hear a sound(it restarted<insert gta sa cj meme>) and it starts all over again. I flashed 9.6.14 ver of rom btw.
I would say 9.6.14 had bug so reflashing didnt help! as I said before, consider upgrading atleast to 9.6.20
As you already know from my response above that I was only able to flash through fastboot mode and I wasn't able to get into edl mode as I read just a few hours ago that it's locked away. So my question is, is there a chance that this all could be solved if the rom is flashed through edl. As that's much more of a clean install rather than fastboot, as I mentioned twrp remembered the settings and all that shiz. Or should I just try another ver of miui I have or the custom rom I've downloaded?
Also to get into edl mode, does both of these requirements needed to be met? Or any 1 should work? :-
Authorised account - So who can get this? Is there any bypass or workaround for it?
Test Point - I don't wanna open my phone, as you know it's new & all, tho it's not a problem if there's no other way. It's just that I have some bad memories regarding test point of my beloved RN3(now dead) so I just wanted to stay away from hardware as long as possible. Is there any bypass or a workaround for it?
till MiMax
-holding THREE buttons for 30 seconds used to trigger edl mode
-miflasher simply identify EDL mode and used to flash the beryllium fastboot rom
the question is why they stopped?
well fastboot rom when extracted, hackers can simply alter and repack the img files! YOU CAN EVEN place twrp as "recovery.img" in extracted folder miui will flash twrp thinking its vendor recovery! and the device in EDL mode will accept it..
this was serious security risk! so they capped EDL mode in both ends
- miuiflasher needs AUTHORISED ACCOUNT
- DEVICE won't enter in edl mode unless you remove back cover and under batter wire you short two motherboard points with thin wire or tweaser! (and immediately connect usb calbe to system)
now what can you do?
1. use older version of Miflasher which doesnt verify rom
2. user altered rom of specific build or time to WAKE UP your BRICKED device!
I have never done it so you need to investigate and use your poco as gunie pig to test these methods after REMOVING Back Panel (HIGHLY NOT RECOMENDED
or take device to authorised Mi Dealer and let them EDL for you!
Click to expand...
Click to collapse