Dears
Already I bought Honor 8c from china model BKK-AL10 ,but when insert UIM card it is not registered with cdma network 800Mhz !
try change and swap the UIM card place , also not registered
try to use some secret engineering code like (*#*#2846579#*#* , other codes ) also not registered
check with the provider in my country , he confirm the same band (800Mhz) !
really i'm confused why this happens !
Please any one help me , I feel I bout not useful gadget , because I do not really use it , i lost my money
That's strange, the 8C does support CDMA 800 Mhz, did you try to contact the seller?! Maybe, he'll have the answer.
Honor 8X support CDMA 850 Mhz.
PalakMi , sure he does confirm it's support cdma 1x & EVDO ,800Mhz band
alhanafe said:
PalakMi , sure he does confirm it's support cdma 1x & EVDO ,800Mhz band
Click to expand...
Click to collapse
What country do you live in?Which mobile operator?
alhanafe said:
PalakMi , sure he does confirm it's support cdma 1x & EVDO ,800Mhz band
Click to expand...
Click to collapse
I can't think of anything that causes the issue. How about a factory reset?! It will probably fix the issue.
Dear , Palak Mi ...already did factor rest but no result , still I can not catch CDMA signal !
alhanafe said:
Dear , Palak Mi ...already did factor rest but no result , still I can not catch CDMA signal !
Click to expand...
Click to collapse
I'm so sorry to tell you that I ran out of ideas. I really hope you'll fix it really soon.
alhanafe said:
Dear , Palak Mi ...already did factor rest but no result , still I can not catch CDMA signal !
Click to expand...
Click to collapse
Mobile phones only support CDMA BC0, not CDMA BC1，Is it not supported by mobile operators?
Dear's
The operator in my country uses's CDMA Band BC0 (800Mhz), so why my Honor 8c does not catch the signal when insert UIM card !? while my old phone Honor 4a still working fine without any problem when insert UIM card catch the signal and make a call normally !
Please help me soon..
Related
yesterday i bought motorola photon from eBay , i took my sim card to phone . I set APN my operators but i cannot see 3G or H icon on my statusbar .. how to fix it ?? where's the problem ?? i'll thanks to you who solve my problem .. please help
Regards
Oktav
oktavianno said:
yesterday i bought motorola photon from eBay , i took my sim card to phone . I set APN my operators but i cannot see 3G or H icon on my statusbar .. how to fix it ?? where's the problem ?? i'll thanks to you who solve my problem .. please help
Regards
Oktav
Click to expand...
Click to collapse
Do you running Stock ROM? Mine is fine running AXIS. For shot way, turn airplane mode ON then OFF.
If your ROM is not 2.3.5 just flash your sbf.
oktavianno said:
yesterday i bought motorola photon from eBay , i took my sim card to phone . I set APN my operators but i cannot see 3G or H icon on my statusbar .. how to fix it ?? where's the problem ?? i'll thanks to you who solve my problem .. please help
Regards
Oktav
Click to expand...
Click to collapse
Who is your service provider?
Please note the photon only supports HSDPA 850 / 1900 / 2100 for 3g. So if your provider uses another frequency for 3g, it wont work. For example, in the US AT&T 3g will work on the photon but T-mobile won't
kurtcocaine said:
Who is your service provider?
Please note the photon only supports HSDPA 850 / 1900 / 2100 for 3g. So if your provider uses another frequency for 3g, it wont work. For example, in the US AT&T 3g will work on the photon but T-mobile won't
Click to expand...
Click to collapse
Indonesia use 2100, so default will works. setting
Sent from my SPH-D600 using xda app-developers app
SOLVED I Try hard reset and it works Thanks for responder
Does this phone works on wcdma 900 mhz?
czara6 said:
Does this phone works on wcdma 900 mhz?
Click to expand...
Click to collapse
No It won't, after look at what base-bands it is capable of using it can use GSM 900 mhz but not wcdma 900 mhz. Even though they are on the same frequency they after different radio technologies.
I know the difference between wcdma and gsm. My problem is that many Sellers writes that p770 support wcdma 900 mhz. So if any of you have this phone and can confirm that?
in search of the truth
czara6 said:
I know the difference between wcdma and gsm. My problem is that many Sellers writes that p770 support wcdma 900 mhz. So if any of you have this phone and can confirm that?
Click to expand...
Click to collapse
someone who has the phone can confirm??
I asked "etotalk" and this is their response:
answer:
Hi, regarding Lenovo P770 smartphone.
In the page of "etotalk" in the features it says "WCDMA 900/2100MHz" but the official website of "lenovo" puts WCDMA 2100Mhz. What is the correct figure?
responce:
Yes, lenovo shows is 2100mhz, but based on our customers' feedback, it should support 900 as well
Maybe my English is not clear because I use a translator but my response does not seem accurate
jmmarfda said:
someone who has the phone can confirm??
I asked "etotalk" and this is their response:
answer:
Hi, regarding Lenovo P770 smartphone.
In the page of "etotalk" in the features it says "WCDMA 900/2100MHz" but the official website of "lenovo" puts WCDMA 2100Mhz. What is the correct figure?
responce:
Yes, lenovo shows is 2100mhz, but based on our customers' feedback, it should support 900 as well
Maybe my English is not clear because I use a translator but my response does not seem accurate
Click to expand...
Click to collapse
Hello,
I have the p770 for one month. I am living in Bulgaria and I am using Vivacom GSM operator. Its 3G network is operating at 900 MHz. The phone is working fine with 3G enabled. In settings -> about phone it is said that the mobile network type is HSPA. I hope this helps.
Bkulov seems to be correct, i am living in Africa & using a cellular operator which runs on the 900mhz band. I get 3g and Hspa with the Lenovo p770. I ran a test with the speedtest.net app & i got 2046 kbps DL & 1457 kbps UL. I thought there could be a possiblity of the phone running on EDGE/2G but i dont think so myself because obviously the phone doesnt state it & they dont state EDGE data for the SIM 1 on the p770.
My over all view about this is that if etotalk.com mentioned that their customers did confirm 900mhz 3G band, then i do not see why it wouldnt be. If anybody with backround knowledge could give us some feedback it will be much appreciated ! Peace
TeddyDroid said:
My over all view about this is that if etotalk.com mentioned that their customers did confirm 900mhz 3G band, then i do not see why it wouldnt be. If anybody with backround knowledge could give us some feedback it will be much appreciated ! Peace
Click to expand...
Click to collapse
Link on this firmware etotalk.com and I tell you it works for 3G900 or not
UMTS-900 on Lenovo IdeaPhone P770
Hello!
I leave in Russian Federation in Moscow region, but 100km souther Moscow. In our region 3G connectivity only available in WCDMA-GSM-900, but this option is not available in EngeneerMode in BandMode section, only WCDMA-INT-2000.
Why UMTS-900 don't work on this phone if other smartphones on MTK6577 platform supports this mode? Is there any way to enable this mode or it has hardware locked chip?
p770 dual sim mtk6577 rooted but no sim management
FoxtrotKZ said:
Link on this firmware etotalk.com and I tell you it works for 3G900 or not
Click to expand...
Click to collapse
Dear sir
i am using p770 rooted, tried a lewa rom made for the phone. worked fine but changed its imei. after that i installed previous twrp backup. again changed imei and then sim management option was also disabeled in settings(faded option/cannot select ot tick). not network in phone even any network . sim detected but modem error shown in enginearing mode , tried original rom from official web through sp flash tool, same condition no signal and sign of radio off in network area. any suggessions what should i do,
its like another worse condition then brick, phone working but real phone feature is not working.
:fingers-crossed:..
plz help.
s_hri said:
... imei ...
its like another worse condition then brick, phone working but real phone feature is not working.
Click to expand...
Click to collapse
Hi.
I can only advise Russian forums.
http://lenovo-forums.ru/topic/1485-faq-imei-nvram-и-их-восстановление/
http://forum.china-iphone.ru/smena-imei-by-simka-mtk-6516-6513-6573-6575-77-t20516.html
http://4pda.ru/forum/index.php?showtopic=413327&st=1780#entry25656908
http://4pda.ru/forum/index.php?showtopic=413327&st=1560#entry25410635
Maybe here and there, look.
Hello All,
I am using A116, tried using t-mobile sim in US, device is not recognizing the network. It reads the sim as T-Mobile, noting else.
Can you please suggest if there is a way to fix this issue.
In the prefered network, there is a T-mobile ( GSM) network with id as 21901 and Priority 10
I tried configuring a new Network Id, its also not working.
Please help
Thanks in advance
amazingap said:
Hello All,
I am using A116, tried using t-mobile sim in US, device is not recognizing the network. It reads the sim as T-Mobile, noting else.
Can you please suggest if there is a way to fix this issue.
In the prefered network, there is a T-mobile ( GSM) network with id as 21901 and Priority 10
I tried configuring a new Network Id, its also not working.
Please help
Thanks in advance
Click to expand...
Click to collapse
T-mobile operates on 850 MHz band.. which is standard in USA whereas in India GSM bands are 900/1800 MHz.. A116 is made to operate on 900/1800 MHz band only.. it is a dual band GSM phone. You need a quad band phone which operates over 850/900/1700/1800 MHz only then you will be able to use it in India as well as USA
Hi guys,
I recently bought a H60-L02 Honor6 and as far as I could Google it, it's only compatible with 1 provider in France : Bouygues Telecom as it seems it as 4GH FDD and TDD but only the TDD is unlocked.
I found a way to unlock the FDD 4G LTE on the huaweimobileshop.com /blog/huawei-honor-6-unicom-4g-version-opened-4g-fdd-lte-function
But I just can't understand how to use the Com Wizard tool as it's in chineese.
Anyone could help me deal with this please?
Thanks a lot,
Up?
Well... In fact I just need to fin out the "Send" button. If anyone could help
Awsome I just can't use my phone...
Be carreful. I think i'ts only for SIM UNICOM provider :" card with Unicom 4G FDD Function opened, of which the area must be covered with the Unicom FDD-LTE signal. "
Same issue
Arelyth said:
Hi guys,
I recently bought a H60-L02 Honor6 and as far as I could Google it, it's only compatible with 1 provider in France : Bouygues Telecom as it seems it as 4GH FDD and TDD but only the TDD is unlocked.
I found a way to unlock the FDD 4G LTE on the huaweimobileshop.com /blog/huawei-honor-6-unicom-4g-version-opened-4g-fdd-lte-function
But I just can't understand how to use the Com Wizard tool as it's in chineese.
Anyone could help me deal with this please?
Thanks a lot,
Click to expand...
Click to collapse
Hello,
Have you found the solution ? and did it work for "Free" in France ?
Merci
Arelyth said:
Well... In fact I just need to fin out the "Send" button. If anyone could help
Click to expand...
Click to collapse
Same tool in english ... just enter the settings as per your image.
Changed nothing for me, but phone still works fine in 3G+
hey everyone, I'd like to open a discussion about getting carrier aggregations on our phones, as you already know many of us can't get this feature that's already been implemented on our carriers in many countries or in some countries one carrier does and one doesn't. it's called LTA-A, LTE plus. 4G Plus network
I saw a post on reddit and I quote :
"TIL : Redmi Note 3 Pro (Kenzo) doesn't support Inter-band CA
Recently, I just bought a carrier aggregation enabled operator's SIM card (Digi) to try out this phone's CA aka LTE-A aka 4G+. For your information, I live in Malaysia and you could look up for this operator in this link: https://en.wikipedia.org/wiki/List_of_LTE_networks_in_Asia. To my surprise, there's no 4G+ icon show up so I'd decided to look up for more info on Chinese MIUI regarding this. Users that are able to access 4G+ are all China Mobile users and China Telecom users are not able to. China Mobile had intra-band CA and China Telecom had inter-band CA and hence I came with a conclusion, this phone doesn't support Inter-band CA."
which makes sense to me, as the carrier in my country which is Iran uses Inter-Band CA and won't work on my phone which is kenzo(rn3).also none of the xiaomi phones work either (entry level to flagship ones)
so, does anyone have the knowledge to tell me and the others that is it possible to change Intra-Band CA to Inter-Band CA? or is it the hardware that should be changed in order to work?
note : LTE bands aren't the issue here, both carrier and phones support them.
@TheStrix @flar2 @franciscofranco @MEGAX91 @billchen1977 @dadi11 @psndna88 @xyyx (please don't mind the order)
any suggestions regarding this issue?
@MEGAX91 I believe you were successful on your device(kate). is there a complete guide for everyone that could follow?
I'm desperately looking for a reasonable solution
XDA topic here: https://forum.xda-developers.com/redmi-note-3/how-to/discussion-redmi-note-3-pro-kate-t3581472
MIUI confirms need: http://en.miui.com/thread-557855-1-1.html
Another thread: http://en.miui.com/forum.php?mod=viewthread&tid=656590
wwenigma said:
XDA topic here: https://forum.xda-developers.com/redmi-note-3/how-to/discussion-redmi-note-3-pro-kate-t3581472
MIUI confirms need: http://en.miui.com/thread-557855-1-1.html
Another thread: http://en.miui.com/forum.php?mod=viewthread&tid=656590
Click to expand...
Click to collapse
hey man, I'm the same one on miui forum for the third link you mentioned(OP), I've confirmed that bug(you second link). I made this thread to get help from devs of this phone.
Carrier aggregation is working fine on Jio Kerala,India
Using LTE CA on band 5 and band 3
Azharudheen said:
Carrier aggregation is working fine on Jio Kerala,India
Using LTE CA on band 5 and band 3
Click to expand...
Click to collapse
Did you modifiy something to get it working or is it working out of the box?
Azharudheen said:
Carrier aggregation is working fine on Jio Kerala,India
Using LTE CA on band 5 and band 3
Click to expand...
Click to collapse
please upload the screenshots of :
- network signal guru app
- devcheck app>system tab
strat1959 said:
please upload the screenshots of :
- network signal guru app
- devcheck app>system tab
Click to expand...
Click to collapse
AravindhStanley said:
Did you modifiy something to get it working or is it working out of the box?
Click to expand...
Click to collapse
No I just followed the instruction on that post
strat1959 said:
please upload the screenshots of :
- network signal guru app
- devcheck app>system tab
Click to expand...
Click to collapse
Now I am inside my home and signal is low here
Azharudheen said:
Carrier aggregation is working fine on Jio Kerala,India
Using LTE CA on band 5 and band 3
Click to expand...
Click to collapse
what NV value you changed?
give that value plz
Azharudheen said:
Now I am inside my home and signal is low here
Click to expand...
Click to collapse
It shows LTE+/4G+ but only 1 carrier. It cant working just got information from service provider about second carrier. I exactly got the same result.
2 different band, need to use 2 different antenna...
wwenigma said:
It shows LTE+/4G+ but only 1 carrier. It cant working just got information from service provider about second carrier. I exactly got the same result.
2 different band, need to use 2 different antenna...
Click to expand...
Click to collapse
yes. me too same . Hardware fully support LTE-CA 2 carrier but service provider problem
mathan7 said:
yes. me too same . Hardware fully support LTE-CA 2 carrier but service provider problem
Click to expand...
Click to collapse
There are very few operators which allow carrier aggregation.... Standards are there to implement in their network but mostly they are pretty expensive for them to bring live... May be in future, we may have