If you are on Global Stable build (V10.1.3.0.PEJMIFI), then please use below download link to get OTA zip from official MI server.
http://bigota.d.miui.com/V10.2.2.0.PEJMIXM/miui-blockota-beryllium_global-V10.1.3.0.PEJMIFI-V10.2.2.0.PEJMIXM-5e7ec9ad4f-9.0.zip
Enjoy guys
how to install it? I am using custom with root. (stock android)
faxel said:
how to install it? I am using custom with root. (stock android)
Click to expand...
Click to collapse
TWRP?
Install back 10.1.3.0 than flash this image ower that maybe works.
It's ****ty update, Battery percentage removed, No notch hide, no battery drain fixed. , And ****ty animation, I liked the previous one
bitye said:
TWRP?
Install back 10.1.3.0 than flash this image ower that maybe works.
Click to expand...
Click to collapse
This is just an OTA and only works on STOCK ROM. If you are using custom ROM please wait for recovery ROM or just flash available stock ROM from MIUI website via recovery/TWRP and then this OTA zip.
vivu.vivek said:
This is just an OTA and only works on STOCK ROM. If you are using custom ROM please wait for recovery ROM or just flash available stock ROM from MIUI website via recovery/TWRP and then this OTA zip.
Click to expand...
Click to collapse
I already in stock rom stable but I have error when I install this with twrp..
Failed..
Sent from my POCOPHONE F1 using Tapatalk
Working great, thanks!
night mode is not effective Pixel mod is best
bkrishna963 said:
night mode is not effective Pixel mod is best
Click to expand...
Click to collapse
It's good, it's better than don't have anything, but yes, Gcam night sight it's awesome.
Mr.Sm1th said:
I already in stock rom stable but I have error when I install this with twrp..
Failed..
Sent from my POCOPHONE F1 using Tapatalk
Click to expand...
Click to collapse
AFAIK, you can't flash incremental OTA zip with TWRP. You have wait for the full ROM.
Or dirty flash the already installed ROM which will overwrite TWRP and restore stock recovery. With stock recovery you can flash the incremental OTA zip and after booting into system and setting up the phone, flash TWRP if needed.
tnsmani said:
AFAIK, you can't flash incremental OTA zip with TWRP. You have wait for the full ROM.
Or dirty flash the already installed ROM which will overwrite TWRP and restore stock recovery. With stock recovery you can flash the incremental OTA zip and after booting into system and setting up the phone, flash TWRP if needed.
Click to expand...
Click to collapse
Yup i did just this thanks it works!
Sent from my POCOPHONE F1 using Tapatalk
Mr.Sm1th said:
Yup i did just this thanks it works!
Sent from my POCOPHONE F1 using Tapatalk
Click to expand...
Click to collapse
There is a thanks button for just this purpose.
I am on beta 9.1.10, how to flash this?
---------- Post added at 04:42 PM ---------- Previous post was at 04:41 PM ----------
tnsmani said:
There is a thanks button for just this purpose.
Click to expand...
Click to collapse
I am on beta 9.1.10, how to flash this?
Hemudon said:
It's ****ty update, Battery percentage removed, No notch hide, no battery drain fixed. , And ****ty animation, I liked the previous one
Click to expand...
Click to collapse
i guess i stay in oreo until they sort it out...
vivu.vivek said:
If you are on Global Stable build (V10.1.3.0.PEJMIFI), then please use below download link to get OTA zip from official MI server.
http://bigota.d.miui.com/V10.2.2.0.PEJMIXM/miui-blockota-beryllium_global-V10.1.3.0.PEJMIFI-V10.2.2.0.PEJMIXM-5e7ec9ad4f-9.0.zip
Enjoy guys
Click to expand...
Click to collapse
After OTA Zip update 10.2.2.0 from above link, the three dot menu on download page is not having a option of ' Choose update package"
Tap a few (5, if I'm not mistaken) times on big "10" in the updater app, then the additional options to update from the file will be shown.
offical release in download section
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
katoda_ltd said:
Tap a few (5, if I'm not mistaken) times on big "10" in the updater app, then the additional options to update from the file will be shown.
Click to expand...
Click to collapse
Thanks bro for help, now it displaying the feature...?
Related
Hello Guys,
This ROM I have extracted from my friends mobile who has received the mobile today (8/30/2013). :good:
To avoid confusion I have created a new thread.
What's New:
* More bug fixes? I don't have change log. As said I have extracted from my friends mobile.
Vinod Royal (facebook) - Flickering issue resolved after flashing.
Click to expand...
Click to collapse
Sauravh
Guys, I found these changes..
Brightness has a economical brightness option, latest play store and volume like notification and voice ring tones have increased..
Battery backup seems improved but can't be so sure so early..
Click to expand...
Click to collapse
vikas1038
Thanks Bro!!!
Finally got 4.2.1 without the flickering issue...
One more thing the Volume has increased as well
Click to expand...
Click to collapse
MySelf : I did not face any issues. If some one facing GPS issues, use the attached gps file. Place it in /etc/gps.conf
Old Versin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
New Version
Download
-----------
I have successfully flashed using both the methods. So do you.
CWM Zip Click Here - Link updated (3/9/2013)
Flash Tools Click Here - Note: I have removed the Cache & User data. You can include them from previous firmware download if you want.
TWRP recovery included by default. If not interested, I've included the stock Recovery in the same zip. You can rename and flash.
Update: Flashing without Cache & User data will retain your previous data. Which means your version has been updated with apps and data.
Mirror 1 [Flash with spflash tools] - Wait for some time till the download starts.
HIT THANKS!!! BECAUSE IT WONT COST ANY :angel:
Can you provide the link to download it??
---------- Post added at 05:32 PM ---------- Previous post was at 05:09 PM ----------
Hi ,
anything new in this one???
Any Use Of Having That?
any new update?
---------- Post added at 06:15 PM ---------- Previous post was at 06:13 PM ----------
or its a full stock update?
its getting stuck at the canvas hd logo
nisanthsojan said:
its getting stuck at the canvas hd logo
Click to expand...
Click to collapse
after flashing go to recovery menu..and wipe all data/cache
Dj_Ignatius said:
after flashing go to recovery menu..and wipe all data/cache
Click to expand...
Click to collapse
NOt working.
TWRP says no os installed
nisanthsojan said:
NOt working.
TWRP says no os installed
Click to expand...
Click to collapse
I guess u r supposed to flash it using cwm as specified in OP
can this fixes flickering issue
I'm facing flickering issue with 4.2.x rom..can this one fix my problem...
So This ROM is not compatible with TWRP?
If not any Solutions?
Because most of us are using Twrp recovery
By the way Good Work
sent from my Canvas starkHD...!!!
Anands3 said:
So This ROM is not compatible with TWRP?
If not any Solutions?
Because most of us are using Twrp recovery
By the way Good Work
sent from my Canvas starkHD...!!!
Click to expand...
Click to collapse
I followed the below steps to flash this:
1) Goto TWRP
2) Wipe Cache/Dalvik-Cache/Factory Reset/System
3) Reboot > Power Off
Now flash the ROM using SP Flash tools
Any New Thing In This ROM?
arush15june said:
Any New Thing In This ROM?
Click to expand...
Click to collapse
There is new option in the brightness
Economical backlight .
OP Updated!
If any one facing the issue, please let me know.
Provides the details like, which process you are doing?
1) Flash Tools or CWM ?
2) Do you see any error?
Some of them, successfully flashed without issue. Even I have used the Flash Tools method and flashed latest firmware. :angel:
flickering issue resolved
thanx mate finally i installed a 4.2.1 jb without flickering issue...i suggest to the persons who are facing flickering issues just download this....its really awesome...[QRCODE][/QRCODE]
is it better than xflare v1.1
Vinodroyal said:
thanx mate finally i installed a 4.2.1 jb without flickering issue...i suggest to the persons who are facing flickering issues just download this....its really awesome...[QRCODE][/QRCODE]
Click to expand...
Click to collapse
is this Rom better than xflare v1.1.
This is just a stock 4.2.1 rom with new kernel and baseband that's it...
Sent from my Micromax A116 using XDA Premium 4 mobile app
Flashed the CWM Version. But no chance noticed in "About" information. ??
Sent from my Micromax A116 using Tapatalk 2
can you some please extract boot.img and "firmware" folder from '/system/etc'
sendhiloo7 said:
can you some please extract boot.img and "firmware" folder from '/system/etc'
Click to expand...
Click to collapse
Here you go. Why do you want them?
Here's the stock rooted YNG1TAS0YL ROM. Includes root and the rest is untouched, so it's OTA update safe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Stock Rooted YNG1TAS0YL ROM
md5 - 2498054342603ca25aab2b809812c218
YNG1TAS0YL Radio, etc
md5 - 6d5db5af6c92b814b9a0ebd18341dd8e
F2FS users - Attached zip includes a modified updater-script that needs to be added to the ROM(overwrite updater-script in META-INF\com\google\android folder), which will format the system partition as F2FS. You will also need to overwrite the boot.img with a F2FS compatible one or you can flash it after flashing the ROM
Great job....had to wait for your version all day..
Thanks Sir Calkulin, was waiting too for you and your great job, as always!
Great post man. Waiting for your modded version.
Dear friend,
The link for downloading rom is not working. Could you please check. Thanks.
Edit: tried on pc and it worked :thumbup:
Sent from my A0001 using XDA Free mobile app
Good job!
if i flash it from OxygenOS, should i flash the firmware in addition?
btw. i'm also waiting for your personal for battery saving tweaked rom
@Calkulin, can we use the same F2FS flashable script that you provided in the past? Otherwise, I'll make a flashable F2FS when I got time next week.
Is there any difference between this build and the official rom if I flash it (clean install) with twrp and flash supersu on top of it ?
Calkulin said:
Here's the stock rooted YNG1TAS0YL ROM. Includes root and the rest is untouched, so it's OTA update safe
Stock Rooted YNG1TAS0YL ROM
md5 - 2498054342603ca25aab2b809812c218
YNG1TAS0YL Radio, etc
md5 - 6d5db5af6c92b814b9a0ebd18341dd8e
Click to expand...
Click to collapse
robuser007 said:
Is there any difference between this build and the official rom if I flash it (clean install) with twrp and flash supersu on top of it ?
Click to expand...
Click to collapse
it is already pre rooted.. rest is untouched
geokilla said:
@Calkulin, can we use the same F2FS flashable script that you provided in the past? Otherwise, I'll make a flashable F2FS when I got time next week.
Click to expand...
Click to collapse
No but I created a updater-script for this ROM and attached it to the OP
robuser007 said:
Is there any difference between this build and the official rom if I flash it (clean install) with twrp and flash supersu on top of it ?
Click to expand...
Click to collapse
This uses the internal SU, so that would be the difference
OK all is back in order in the world now that I see Calk put up his stock rooted version. Let the crazy questions begin.
---------- Post added at 07:32 PM ---------- Previous post was at 07:28 PM ----------
néonaloj said:
Thanks Sir Calkulin, was waiting too for you and your great job, as always!
I suppose we have to flash both, the rom and the "extras", (radio etc)?
Click to expand...
Click to collapse
I mean I would to ensure all goes well.
been waiting for this! thanks a lot! btw is it ok if i dirty flash it over stock rooted 05Q?
Krusade said:
been waiting for this! thanks a lot! btw is it ok if i dirty flash it over stock rooted 05Q?
Click to expand...
Click to collapse
dirty flashing is fine but if any issues don't report as a bug. Of course a clean flash will always be recommended
Can I flash it as secondary rom on multirom or should I flash it as primary? Thanks for the gr88 contribution.
anyone help upload to other server, i can't download on mediafire.
What Kernel can I use to get f2fs working on CM12s? I tried latest AK and TYR but it stuck on the boot animation.
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
Transmitted via Bacon
Wait...is this Cm12s?
Locklear308 said:
Wait...is this Cm12s?
Click to expand...
Click to collapse
Lol. Yes. Can't you tell by the build number?
Transmitted via Bacon
Locklear308 said:
Wait...is this Cm12s?
Click to expand...
Click to collapse
cyanogen OS 12.. not cm12s.. lol..
just the same.. cyanogen just prefers to call it cyanogen os 12
Moderator, please remove thread. It's a lost cause...
Sorry guys, but I've not been able to do much else with this project, so I'm abandoning it completely. Not to mention, I failed to post kernel source per XDA rules (my bad), and no longer have that source. Good luck and thanks...
MiUI_N6v2
Is miracast supported with this rom ? Thanks
Sent from my Nexus 6 using Tapatalk
Reserved
Sent from my ONEPLUS A3003 using Tapatalk
Decryption key needed for download the ROM.
youssefkr said:
Is miracast supported with this rom ? Thanks
Click to expand...
Click to collapse
Not sure. Test?
drmuruga said:
Decryption key needed for download the ROM.
Click to expand...
Click to collapse
Fixed dl link... sorry bout that
SCREENSHOTS???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 6 using XDA-Developers mobile app
thomas.raines said:
Must flash Gapps and su app (prefer supersu)
Click to expand...
Click to collapse
Should I install gapps and supersu right after ROM installation process?
luutuananh said:
Should I install gapps and supersu right after ROM installation process?
Click to expand...
Click to collapse
yes you must then next unistall app super su... here i root with nexus tool kit
eltonpestana said:
yes you must then next unistall app super su... here i root with nexus tool kit
Click to expand...
Click to collapse
I did that and got force close on setup screen.
luutuananh said:
Should I install gapps and supersu right after ROM installation process?
Click to expand...
Click to collapse
luutuananh said:
I did that and got force close on setup screen.
Click to expand...
Click to collapse
first full wipe next install rom ... next first wait boot ... then next flash gaps . then flash root with nexus tool kit ... then unistall app... yes it working very well
RIPPER said:
SCREENSHOTS???
Click to expand...
Click to collapse
please link screenshots. don't post. I will add them to the op
thank you
thomas.raines said:
please link screenshots. don't post. I will add them to the op
thank you
Click to expand...
Click to collapse
Here it is
http://imgur.com/tW2Kqn2
http://imgur.com/c8HjGNO
http://imgur.com/TxJWJUa
Sent from my Nexus 6 using XDA-Developers mobile app
I tried that but after first boot, when I flash Gapps it boot loops. I used the latest opengapps 6.0 aroma installer
deepaktom said:
I tried that but after first boot, when I flash Gapps it boot loops. I used the latest opengapps 6.0 aroma installer
Click to expand...
Click to collapse
Try open gapps pico.... Not aroma
That worked for me
Sent from my Pixel XL using Tapatalk
deepaktom said:
I tried that but after first boot, when I flash Gapps it boot loops. I used the latest opengapps 6.0 aroma installer
Click to expand...
Click to collapse
try pico or nano gapps ... AROMA not is good
@ O P
Is there anyway you can switch to some other domain to upload the build? Like AFH?
I had to download mega app in phone to download this. I can't download through Browser.
vasanthmes said:
@ O P
Is there anyway you can switch to some other domain to upload the build? Like AFH?
I had to download mega app in phone to download this. I can't download through Browser.
Click to expand...
Click to collapse
Working on it... Thing about afh, is you have to request for a dev account. I submitted the request, just waiting for the approval.
By the way,
Even though it's in alpha stage, is it possible anybody who is using the ROM give us what's working and what's not?
It will be helpful! Just downloaded the ROM. Waiting for my phone to charge....
I've been using AOSP for a long time, just wanted a change so planning to use this ROM. Excited :angel: :fingers-crossed:
vasanthmes said:
By the way,
Even though it's in alpha stage, is it possible anybody who is using the ROM give us what's working and what's not?
It will be helpful! Just downloaded the ROM. Waiting for my phone to charge....
I've been using AOSP for a long time, just wanted a change so planning to use this ROM. Excited :angel: :fingers-crossed:
Click to expand...
Click to collapse
Still no way to flash gapps for me
I tried everything every way
Plzz checkout our website for updates
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credit:
androidlover5842 for creating the recovery,kernel
androidlover5842 and mujeebhasan for guiding me
Theprofessionals for motivating me
weritos
Instructions:
Download zip and please use the TWRP recovery from this thread.
Do simple wipe (Factory reset) by using TWRP recovery.
Don't do advance wipe
Then flash the Pac zip file.
Go back and select opengapps zip and flash it.
Click on Install Image button present on the right of "Select Storage"
Flash this Boot.img from there
Then go to wipe and do factory reset.
Reboot and enjoy.
Not working:
Video recording
Camera(fixed in beta 2)
Bluetooth
Some other minor bugs
Wifi (Flash this for wifi fix)
Changelog :
22/12/2016 (Beta 1)
*Initial release
26/01/2017 (Beta 2)
*Camera for pictures fixed
*Flashlight fixed
*Battery fix
Downloads:
Pac-Rom
Beta 1
Boot.img
Beta2(no need to flash boot.img and wifi fix)
Open Gapps
OTA Updater
Arubadel (For extending battery life)
Source:
Device Tree
Kernel
Version Information:
Status : Beta
Android Version : 6.0.1
Kernel Version : 3.5.1-Androidlover5842-g0131d02
Click here to view our google spaces group
That's really awesome dev. But where is the rom link.
Sent from my iPhone using Tapatalk
It is uploaded now
nice rom.. but what mean of Random Reboots?
---------- Post added at 01:45 AM ---------- Previous post was at 01:44 AM ----------
muhammadhakimi said:
nice rom.. but what mean of Random Reboots?
Click to expand...
Click to collapse
are beta mean still unstable version??
muhammadhakimi said:
nice rom.. but what mean of Random Reboots?
---------- Post added at 01:45 AM ---------- Previous post was at 01:44 AM ----------
are beta mean still unstable version??
Click to expand...
Click to collapse
Its unstable
Ayush1325 said:
Its unstable
Click to expand...
Click to collapse
i installing :crying:
after install it show blackscreen
muhammadhakimi said:
i installing :crying:
Click to expand...
Click to collapse
Stable will be released soon
muhammadhakimi said:
i installing :crying:
after install it show blackscreen
Click to expand...
Click to collapse
Flash the boot.img ftom the thread
Did anyone tried this ROM...??? how is the Battery performance..??
Ayush1325 said:
Flash the boot.img ftom the thread
Click to expand...
Click to collapse
how to put boot.img in it?
in downloadmode?
Thanks for this awesome rom.
Very smooth and fast.:good:
But brightness did't work.
muhammadhakimi said:
Thanks for this awesome rom.
Very smooth and fast.:good:
But brightness did't work.
Click to expand...
Click to collapse
To fix that go to settings > Display & lights > Adaptive brightness, disable it. As the device doesn't have light sensor, this option should not be used
muhammadhakimi said:
how to put boot.img in it?
in downloadmode?
Click to expand...
Click to collapse
From the recovery
I have given in instructions
More screenshots please
ayush1325 said:
stable will be released soon
Click to expand...
Click to collapse
a w e s o m e!
omg i'd love to hug you rn! probably the best christmas gift in 2016, since nothing is quite working out this year XD
.
edit: fancy boot animation, lots of love for you ?
:crying:Bootloader only
eltoleon said:
:crying:Bootloader only
Click to expand...
Click to collapse
Did u flash the boot.img given in the thread?
It says error installing the ROM. My device is second half of 2014, so I first need to follow the rev2 method of CM11 right?
Edit: Now it's installing. Devices that are second half of 2014 should never wipe in twrp. Instead, use the CM11 rev2 method suggested by weritos
Ayush1325 said:
Did u flash the boot.img given in the thread?
Click to expand...
Click to collapse
Yap:fingers-crossed:
Notifications Icons and Netspeed View Global Stable 11.0.8.0Compatible only with the stable Stock rom specified above.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirement:
*Bootloader Unlocked
*TWRP Installed
*Magisk Should be installed and latest
*Phone should have boots for 1-2times(No Fresh Install)
*Global Stable ROM(EU Roms are based on global, are not global)
Downloads:
POCO_F1_NetspeedView+Notification_Icons_MIUI_11.0.8.0_STABLE_by_HassanMirza01.zip
Installation:
*Make a backup of system partition with twrp
*Use Twrp recovery or Magisk to flash one of the zip file
To restore the stock SystemUI(or any error came),:
Go to Magisk Manager, Untick & Remove Module.
HassanMirza01 said:
Notifications Icons and Netspeed View Global Stable 11.0.6.0
Compatible only with the stable Stock rom specified above.
Requirement:
*Bootloader Unlocked
*TWRP Installed
*Phone should have boots for 1-2times(No Fresh Install)
*Global Stable ROM(EU Roms are based on global, are not global)
Downloads:
POCO_F1_NetspeedView+Notification_Icons_MIUI_11.0.6.0_STABLE_by_HassanMirza01
Installation:
*Make a backup of system partition with twrp
*Use Twrp recovery to flash one of the zip file
To restore the stock SystemUI(or any error came), flash this file :
POCO_F1_Stock_MiuiSystemUI_11.0.6.0_Restore
Click to expand...
Click to collapse
Thanks , but can you make one for EU version?
Flashed on 11.0.5.0(pie) - nothing happens. I don't want to update to 11.0.6.0. Is there any way that I could use this mod? The pie versions are for MIUI 10.X.X.X.
Doesn't work on 11.0.6.0. After flashing it gets stuck in bootloop...Restore-zip doesn't do anything either, After flashing it phone reboots in fastboot...
doesnt work in V11.0.6.0 android 10
after flashin this zip with TWRP phn doesnt boot.
always going to FASTBOOT mode.
please do needful step.
---------- Post added 29-03-2020 at 12:01 AM ---------- Previous post was 28-03-2020 at 11:59 PM ----------
McPh1st0 said:
Doesn't work on 11.0.6.0. After flashing it gets stuck in bootloop...Restore-zip doesn't do anything either, After flashing it phone reboots in fastboot...
Click to expand...
Click to collapse
YES MINE TOO.
then i install 11.0.6.0 full rom again
then my phn boots normally.
Will this get updated ? What about support for eu rom ?
Forget this mod and go to ktrom search on telegram ... :good:
link please
fifi570 said:
Forget this mod and go to ktrom search on telegram ... :good:
Click to expand...
Click to collapse
how did u do this? please share the link
hasanal.noman said:
how did u do this? please share the link
Click to expand...
Click to collapse
Go to Telegram and search "ktrom" I cant share Telegram link on xda ...
fifi570 said:
Go to Telegram and search "ktrom" I cant share Telegram link on xda ...
Click to expand...
Click to collapse
If u cant share telegram link here.. creat a txt file n paste the link in that text file n upload the link.. i cant find the ktrom ??
edit
HassanMirza01 said:
Okay so i got the solution for crashing ui.. you have to use Lucky Patcher and disable pkg manager signature verification, then install this mod and it will boot, i will update links today!
Cheers
Click to expand...
Click to collapse
Waiting for the link
where is link??
please provide the link
will post it today... Its a magisk module now... so you can always easily able to revert back...
HassanMirza01 said:
will post it today... Its a magisk module now... so you can always easily able to revert back...
Click to expand...
Click to collapse
Only stable or stable eu can work also ?
fifi570 said:
Only stable or stable eu can work also ?
Click to expand...
Click to collapse
will never support EU... just global stable.
Oki thx. Does it have bug on lockscreen because some mods can cause this
fifi570 said:
Oki thx. Does it have bug on lockscreen because some mods can cause this
Click to expand...
Click to collapse
those who dont know how to enable it and then they try to copy others, these kinda of bugs happened... its not in my mod... i have shown netspeed meter on left side instead of carrier name.
Ok I ll try and thx to your hard work ! :good: