Hello guys. I need your help. I think i somehow soft bricked my dad's s3 3gb ram version.
What i have done is flashing a TWRP img. Twrp was just fine. After that i wiped and installed a rom. I think the zip was broken or something because after the processes is done twrp said there is no OS (operation system). I clicked on reboot anyway by mistake i guess...
And at this point my phone only restarts itself. I can get in FASTBOOT mode. I have the drivers and all but i dont know what can i do with the fastboot mode.. But fastboot seems stable. The phone is not restarting when it is on fasboot mode. Yet as i say again. Is there ANYTHING i can do with fastboot commands? i tried to flash a recovery twrp img it said recovery partition doesnt support flashing..
When i try to boot in recovery the phone seems to start booting to recovery but after a while it restarts itself as it does always...
I tried SP flash tool mode too. My driver is fine, i can see preloader driver on my device manager but as always phone restarts itself to boot in normal mode... If only i can stop the phone from restarting.. I have twrp backup... Or i can flash stock rom...
Please help... Any reply will be appreciated.
I mentioned my problem on the main topic of jiayu s3 but since there is so little user attention there i wanted to open a thread here as well.. Sorry if its out of rule.
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Tarun0101 said:
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Click to expand...
Click to collapse
Hey i have the same problem. Can you suggest me something regarding this.
A very big question
Hello! I have an argentine copy of the M3, called Hyundai Ultra Energy, same processor, same storage, camera quality, all in the same place. My question is how do I install a custom rom and how do I flash the recovery at first. I use adb commands, but I know that I have to do it with spflash. How is the process? I download the rom, charge the scatter and tilt only in recovery? Would be dangerous? Is more safe to root with King Root?
Hi all,
I'm new here so idk if this is the right or the wrong section for my problem, but I need help like I never did xD
So I have Doogee X6 phone it's mt6580 android 5.1 , few days ago I decided to root it and I done it with Kingoroot app and it succeed. Today, I tried to install custon recovery so I head to Needrom and download twrp img from there and tried to install it with ADB FASTBOOT FILES WINDOWS like in this XDA tutorial
https://www.xda-developers.com/how-to-install-twrp/
I followed the steps then I ran to the problem where I had to unlock boatloader with "fastboot oem unlock" next I install the recovery img using "fastboot flash recovery twrp-2.8.x.x-xxx.img", after that the phone started to reboot and try to enter twrp with some failure lines like:
updating patrition details
'full selinx support is ..
failed to find /data invalid argument
... done'
I tried to boot into Factory mode or pressing all the buttons but didn't work the reboot process is quite fast :'(
So what should I do now ? did I brick my phone or can it be repaired again ?
I apreciate it if someone can help me with my problem
Thank you
Hi everyone,
first of all, I guess there should be a section dedicated to the Z5 to keep the forum clean!
Other than that, I'm really having trouble with my Z5. I can't find a way to move on from fastboot mode! Can't boot to edl, tried to flash recovery but they won't boot and so on...
Do someone has some idea? I can provide every information you need to troubleshoot that!
Thank you in advance,
Lorenzo Benevento.
Hi , inside stock firmware which .img files you have ?
Hello guys,
Could any of you create a brick troubleshooting thread in this model?
I need help with unbricking my Z5. I think I messed up with the recovery partition.
I can't turn it on at all after I press all the button combinations.
I tried the suggestions on the Sahara error that they did on the Lenovo Zuk Z2 with no success.
Does anyone have a workaround for this kind of thing?
edsmanco said:
Hello guys,
Could any of you create a brick troubleshooting thread in this model?
I need help with unbricking my Z5. I think I messed up with the recovery partition.
I can't turn it on at all after I press all the button combinations.
I tried the suggestions on the Sahara error that they did on the Lenovo Zuk Z2 with no success.
Does anyone have a workaround for this kind of thing?
Click to expand...
Click to collapse
Look here for steps that you can try ...
https://blogthetech.com/flash-file-lenovo-z5-l78011-firmware-download-stock-rom/
Good luck : )
Teddy Lo said:
Look here for steps that you can try ...
https://blogthetech.com/flash-file-lenovo-z5-l78011-firmware-download-stock-rom/
Good luck : )
Click to expand...
Click to collapse
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
help
how do u fix it? i have the same problem here, please help
edsmanco said:
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
Click to expand...
Click to collapse
Yes, how do u fix it? Share withy us.
xplozia said:
Yes, how do u fix it? Share withy us.
Click to expand...
Click to collapse
Join the telegram group: Lenovo Z5 Brasil, the guys there can help.
I used qfil to restore it.
I also used the video by rendroid. Send him a PM and he'll reply.
Hi there!
I've been trying out a few things and was wondering how on Earth you got it into fastboot mode in the first place? I can't find a way.
xplozia said:
Hello,
I bricked my Lenovo Z5. I need your help, please!
I installed from fastboot, Pixel Dust ROM and after that, the phone not starting. When I connect the phone to PC, I have message with Unlocking Bootloader (was unlocked initialy, on old rom) then Lenovo logo and after a black screen.
I downloaded ZUI_3.9.075_ST for Lenovo, I installed Qualcomm drivers, I installed Qfill but when connect the phone I don't have 9008 Port, to me is 900E. I read few forums about this error (https://zukfans.eu/community/threads...e-easily.3504/ and https://club.lenovo.com.cn/thread-3021991-1-1.html), I makeed a USB cable for DEEP Flash,I peeled the usb-c cable and touched Green and Black wires, but without success.
I installed a new Lenovo USB driver and with USB cable for DEEP Flash, I put the phone in the 9008 port, and Installed with successful, many ROMs 3.9.075, 3.9.200, 4.0.390 but every time after the first reboot appear message with opened bootloader then Lenovo logo and restarting to infinite.
When the phone is connected to PC I have on the phone a menu with "First Boot Mode" and the phone is accesible from PC:
"C:\Users\user>fastboot devices
bb806aa3 fastboot"
I will apreciate yours help. Thank you!
Click to expand...
Click to collapse
Did you follow this guide? https://forum.xda-developers.com/project-treble/trebleenabled-device-discussion/guide-how-to-flash-android-8-1-9-0-t3840839
Yes I see your post and I solved my phone
greetings,
im rookie here but once my MEDIATEK phone got stuck in fastboot mode and i fixed it with connecting to pc and type " fastboot reboot " in adb
edsmanco said:
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
Click to expand...
Click to collapse
share the fix
Please refer to the replies above
Lenovo z5s stuck in fastboot
It's been a very long time since this thread was created, but maybe, with some hope i could get some answers, i have the same problem with the z5s, and i can't do anything, all because i mess with the recovery and i can't get out of the same, when i turn off my cellphone and connect a charger, my cellphone boot automatically into fastboot, i need some help, i don't even know if the telegram thing still exists
Thelostman said:
It's been a very long time since this thread was created, but maybe, with some hope i could get some answers, i have the same problem with the z5s, and i can't do anything, all because i mess with the recovery and i can't get out of the same, when i turn off my cellphone and connect a charger, my cellphone boot automatically into fastboot, i need some help, i don't even know if the telegram thing still exists
Click to expand...
Click to collapse
Before, you installed a new qfil rom? If yes, folow the instruction from https://forum.xda-developers.com/showpost.php?p=77583961&postcount=2 and install Pixel Experience:
2. fastboot flash vbmeta vbmeta.img
3. fastboot flash boot_a boot.img
4. fastboot flash boot_b boot.img
5. fastboot -w flash system_a PixelExperienceP-arm64-ab.img
6. fastboot -w flash system_b PixelExperienceP-arm64-ab.img
xplozia said:
Before, you installed a new qfil rom? If yes, folow the instruction from https://forum.xda-developers.com/showpost.php?p=77583961&postcount=2 and install Pixel Experience:
2. fastboot flash vbmeta vbmeta.img
3. fastboot flash boot_a boot.img
4. fastboot flash boot_b boot.img
5. fastboot -w flash system_a PixelExperienceP-arm64-ab.img
6. fastboot -w flash system_b PixelExperienceP-arm64-ab.img
Click to expand...
Click to collapse
Don't worry i've already solved with some CHINESE PIROMANCY!!!!!!! Even with effective IMEI restoration (I couldn't restore the 2nd IMEI because I didn't know how to set up this one manually with the method I've used with my lenovo)
Hello,
I have a Lenovo Z5s. I wanted to install new android rom like Pixel Experience
I managed to unlock the bootloader with adb fastboot.
I succeeded in flashing TWRP recovery 3.3.1-0529 for my device.
I've downloaded Pixe Experience GSI rom available here https://forum.xda-developers.com/z5...evelopment/lenovo-z5s-pro-twrp-3-3-1-t3953346
I have copied and pasted the Pixel Experience rom (.img file) on my SD Card.
With TWRP, I have wiped necessary files for a clean install.
I have launched the installation of the rom, installation was complete, the phone has reboot, I show Pixel Experience boot sequence with Google logo. The process asked me a password (Encrypted?) . I decided to reboot the phone.
Now, the phone is blocked with a bootloop in recovery mode. I can't access anymore to TWRP recovery. (Erased?)
To explain clearly the situation: I have the menu showing these options: Restart bootloader > Recovery mode > Power Off > Boot to FFBM > Boot to QMM I> Start
FastBoot Mode
PRODUCT_NAME - sdm710
VARIANT - SDM EMMC
BOOTLOADER VERSION -
BASEBAND VERSION -
SERIAL NUMBER - ********
SECURE BOOT - yes
DEVICES STATE - unlocked
No Bootloader, no Baseband.
All of the options return the phone back to the same menu.
The situation seems to be critical (phone bricked) and I can't do anything and I don't know what to do. Is there a chance to save my phone?
Your help will be precious to make my phone work.
Thanks in davance . Best regards.
Hey guys i am also in bootloop with unlocked bootloader ,can you please help us to save our phone !!!???