Related
How to Cast your One Max Screen to Chromecast
Hi everyone! Long time reader but first time posting.
Anyway, since Google finally released Chromecast 1.7.4, we can finally mirror our Android Screen in its entirety as it was shown at the Google I/O conference a little while back. However... only for certain devices. That list of supported devices mentions the HTC One M7 and Google Play edition of the M7... but no HTC One Max. Hmmmm.
Well, since the M7 and the One Max have the same chipset, this should work with no problems. However, once the Chromecast APK was updated, I didn't see the fabled "Cast Screen" button. What a pity.
But no fear! It DOES indeed work for the HTC One Max - and if your anxious to have it working now rather than waiting for Google to eventually update the APK, read on...
Here's how I got near perfect Screen Mirroring on Chromecast...
- Be sure you are on Android 4.4.2+ (I'm on 4.4.4 CM-11 Nightly). I would assume this should work on a Rooted Stock Rom.
- Make sure you are Rooted
1. Update your Chromecast APK to be 1.7.4 if it hasn't auto-updated already.
2. We need to edit your Build.Prop file - so download an app such as BuildProp Editor from the Play Store. Since the file is located in /system/build.prop - you need to be Rooted to edit this.
3. Open your Editor and give it Super User Permissions.
4. Make a backup of your Build.Prop file if the app has the function to do so.
5. Scroll down until you find "ro.product.device". It should read either "t6", "t6spr", or "t6zw" for International, Sprint and Verizon models respectively.
6. Change the "ro.product.device" string to "m7" -- without quotes of course.
7. Reboot your phone.
8. Reboot your Chromecast.
Now, if you Open the Chromecast APK App, once you connect to your Chromecast on the network, you should see the "Cast Screen" button in the pull-out menu of the App,
It's actually very fluid, hardly any noticeable lag. Haven't tested sound yet since I'm writing this at the office and the Chromecast here is just connected to a computer monitor.
I'm currently on a Nightly build of CM 11 for the HTC One Max... and I would have to assume this would work on a Stock Rom - as long as its Rooted.
Let me know how this works for you guys!
Could also try http://forum.xda-developers.com/har...experimental-enable-mirroring-device-t2812193
Flyhalf205 said:
Could also try http://forum.xda-developers.com/har...experimental-enable-mirroring-device-t2812193
Click to expand...
Click to collapse
This method is working so far on my Verizon One Max...
Sent from my NuSense6 One Max
Recently inherited a Nook Tablet 16GB with OS 1.4.3.
Did some searching and Phone Arena http://www.phonearena.com/phones/Barnes---Noble-NOOK-Tablet_id6548 lists it as Android (2.3).
Am not familiar with TI OMAP4 SoC.
Since Android is now at 6, I wonder what the latest OS can be used with it?
Appreciate comments and suggestions!
Thanks
Ken
Should add am wondering what is the latest Android OS I can use before the TI OMAP4 SoC becomes noticeably Slow.
Ken
KenithO said:
Should add am wondering what is the latest Android OS I can use before the TI OMAP4 SoC becomes noticeably Slow.
Ken
Click to expand...
Click to collapse
Slow compared to what? The original 2.3? That I can't speak to since I never did much with my original (ebay) tablet but turn it on and flash CM 10.2.1 (after having it repartitioned at my local B&N store). I ran CM 10.2.1 for a little over a year and was fairly happy with its performance but I have to add that it has been my only tablet experience (if you don't count my much-modified Nook Simple Touch!) and the rest of my experience is with desktop and laptop Windows machines.
I think if you intend to use the tablet for memory and graphics intensive gaming, you may be disappointed. Not sure since I'm not a gamer. I use mine for reading news, watching movies and/or streams, listening to audiobooks, doing crossword puzzles, email, some limited internet browsing, running Kodi, etc. I'm not sure I'd call the tablet response "sprightly", but I'm comfortable with the performance. I don't need to grab a cup of tea while something starts up
I'm not sure about CM 11 (that's roughly KitKat). I skipped over that one to investigate CM 12.1 (Lollipop) for just about a week now and have noticed some strain on the hardware resources and a change in response. But it's still settling in and things change a little from day to day so I'll give it a few more weeks before I decide whether to return to 10.2.1 or try 11.
So....it's largely what you'd expect. This is a piece of hardware that was designed as mainly a reader with a few bones thrown in to tantalize people into thinking they were getting a little something extra--which they were. But that was in the days of Android 2.3 and it really wasn't designed to be a super-duper multimedia tablet. That said, there are a lot of people who still use them and spend a lot of time developing CM for them.
As a 2.3 device it's pretty limited (except as a reader, if you like the backlight) so I'd say give at least CM 10 a try and see what you think. Just keep in mind its hardware origins.
Hi nmyshkin,
1st thanks for your comments! Will try to explain in more detail.
I would like to use my Nook Tablet as a audio/video player (No games) so like to install VLC media player or similar.
"Slow compared to what?" To my experience installing newer Windows OSes on same hardware. Have had best results using apps like nLite or with WinXP using Hiren's MiniXP to reduce all the Win Bloatware!
Since you are much more experienced concerning the Nook Tablet do you have a blog concerning your OS upgrade experience? Also what Audio/Video Player App(s) do you use?
Ken
KenithO said:
Hi nmyshkin,
1st thanks for your comments! Will try to explain in more detail.
I would like to use my Nook Tablet as a audio/video player (No games) so like to install VLC media player or similar.
"Slow compared to what?" To my experience installing newer Windows OSes on same hardware. Have had best results using apps like nLite or with WinXP using Hiren's MiniXP to reduce all the Win Bloatware!
Since you are much more experienced concerning the Nook Tablet do you have a blog concerning your OS upgrade experience? Also what Audio/Video Player App(s) do you use?
Ken
Click to expand...
Click to collapse
If you're interested in mainly audio/video then the NT should serve you well. I hear you about trying to put newer (read: hungrier) operating systems on older machines. The CM people have done a great job but every piece of hardware has its limits. For your purposes I would think that CM 10 would be fine, but you could certainly try 11 or (maybe) 12. The advantage to choosing a more up-to-date operating system is that more apps are available to you. The catch is that the PlayStore will often say an app is not compatible since it sees the device as a Nook Tablet and has no idea that you have upgraded the OS. So you sometimes have to be creative in obtaining apps and sideloading them. As for bloatware, the principal source is the GoogleApps! When I did my CM 10 flashing there was just the typical package but there are now mini, micro, nano, etc., versions which narrow down the list of GApps to bare essentials. I used the nano set on my CM 12.1 and don't miss anything.
I've attached a screenshot of my current Home running CM 12.1. I have a second screen which is just a few utilities (file manager, print, wi-fi transfer, etc.) but you can get an idea of what kind of stuff runs well on the tablet with a newer OS. I've not used VLC player on the NT but I imagine it would be fine. MX Player works well for me and it also serves as my music player. Since I grew up in an era when the album was king, I don't keep separate songs and use minimal tags. If you're a more tag-driven music listener then you'd want something else. CM 10 comes with a tag-friendly music player but if that didn't suit your needs, there are plenty of apps to try in the PlayStore.
Anything that MX Player can't handle (haven't found it yet) Kodi would be able to deal with. I guess you could use Kodi exclusively as a media player but the screen interface is a little trying for a small screen.
I'm "experienced" only to the extent that I've had a lot of help with problems In my view you can't do better than the instructions given by user digixmax. His installation instructions for CM 10 are here. For CM 11 or 12 they are here. If you read through both threads you'll find plenty of panic-stricken posts by yours truly
nmyshkin said:
...
The catch is that the PlayStore will often say an app is not compatible since it sees the device as a Nook Tablet and has no idea that you have upgraded the OS. So you sometimes have to be creative in obtaining apps and sideloading them.
...
Click to expand...
Click to collapse
FWIW I usually can download and install from an alternate source such as 1MobileMarket (http://market.1mobile.com) or Amazon appstore the very same app that Google Playstore deem incompatible with my Nook.
digixmax said:
FWIW I usually can download and install from an alternate source such as 1MobileMarket (http://market.1mobile.com) or Amazon appstore the very same app that Google Playstore deem incompatible with my Nook.
Click to expand...
Click to collapse
Yes, or you can try here: http://apps.evozi.com/apk-downloader/
Most common apps can be downloaded to your PC from there and then side loaded. Supposedly they will also fetch less common ones if you ask.
nmyshkin,
Thanks again for your detailed comments!
Also while I am new to Nook Tablet have been using Android cell phones for a while. My 1st Android phone was a Kyocera Hydro http://www.phonearena.com/phones/Kyocera-Hydro_id7096
Wanted to root it but after reading "!!WARNING!! there is currently no working recovery, beware of the changes you make to your phone, modify at your own risk" (am a believer in Murphies Law
https://en.wikipedia.org/wiki/Murphy's_law) decided not to take the chance.
Recently I got an and hoped to root it but found "Alcatel A460G Rooting Trouble - a lost cause" http://forum.xda-developers.com/general/help/alcatel-a460g-rooting-trouble-pointers-t3261024
so am waiting for someone to do this first.
While I have never Rooted an Android Device did learn early to side load, usually using http://apps.evozi.com/apk-downloader/
Have recently found mention of another Android app download site APKPure https://apkpure.com/ but do Not know how trustworthy it is?
The only thing I know about "CyanogenMod" is what I read at https://en.wikipedia.org/wiki/CyanogenMod
Since my Nook Tablet is still original will volunteer to use any test apps to determine its speed.
Also since it does not have a Camera do not understand the need to go above KitKat (4.4). If there is some other reason would be interested.
"When I did my CM 10 flashing there was just the typical package but there are now mini, micro, nano, etc., versions which narrow down the list of GApps to bare essentials. I used the nano set on my CM 12.1 and don't miss anything." Nano is for me! What about Pico? Also found Pico(Uni)?
Where do you normally download them? Is it http://www.androidrootz.com/2015/03/download-android-44x-kitkat-pa-gapps.html
Question: What do you gain by using CyanogenMod 12.1, based on Android 5.1?
Ken
Hi digixmax,
"I usually can download and install from an alternate source such as 1MobileMarket (http://market.1mobile.com) or Amazon appstore the very same app that Google Playstore deem incompatible with my Nook."
Thanks for the tip!
Do you know of any posts concerning the reliability of alternate sources?
Ken
KenithO said:
nmyshkin,
Thanks again for your detailed comments!
Also while I am new to Nook Tablet have been using Android cell phones for a while. My 1st Android phone was a Kyocera Hydro http://www.phonearena.com/phones/Kyocera-Hydro_id7096
Wanted to root it but after reading "!!WARNING!! there is currently no working recovery, beware of the changes you make to your phone, modify at your own risk" (am a believer in Murphies Law
https://en.wikipedia.org/wiki/Murphy's_law) decided not to take the chance.
Recently I got an and hoped to root it but found "Alcatel A460G Rooting Trouble - a lost cause" http://forum.xda-developers.com/general/help/alcatel-a460g-rooting-trouble-pointers-t3261024
so am waiting for someone to do this first.
While I have never Rooted an Android Device did learn early to side load, usually using http://apps.evozi.com/apk-downloader/
Have recently found mention of another Android app download site APKPure https://apkpure.com/ but do Not know how trustworthy it is?
The only thing I know about "CyanogenMod" is what I read at https://en.wikipedia.org/wiki/CyanogenMod
Since my Nook Tablet is still original will volunteer to use any test apps to determine its speed.
Also since it does not have a Camera do not understand the need to go above KitKat (4.4). If there is some other reason would be interested.
"When I did my CM 10 flashing there was just the typical package but there are now mini, micro, nano, etc., versions which narrow down the list of GApps to bare essentials. I used the nano set on my CM 12.1 and don't miss anything." Nano is for me! What about Pico? Also found Pico(Uni)?
Where do you normally download them? Is it http://www.androidrootz.com/2015/03/download-android-44x-kitkat-pa-gapps.html
Question: What do you gain by using CyanogenMod 12.1, based on Android 5.1?
Ken
Click to expand...
Click to collapse
Yes, it's best to do some homework on a device before purchase if you plan to root it or install alternate ROMS.
Sources for the various GApps packages can be found in the instruction thread I referred you to earlier.
Even CM 10 includes camera and Bluetooth fluff on the NT-- not functional, of course. Theoretically running a more up-to-date OS extends the useful life of the device. App development eventually leaves older devices in the dust, although not completely. I still have a generous complement of apps on my NST and that runs Eclair!
Anyway, the chief advantage of an OS like CM is that it is fluid, with people working to improve and enhance. Also, it overcomes some of the limitations imposed by B&N when they designed their "front end".
KenithO said:
...
Nano is for me! What about Pico? Also found Pico(Uni)?
Click to expand...
Click to collapse
Info on different package types:
http://forum.xda-developers.com/android/software/reborn-gapps-5-t3074660
Where do you normally download them?
Click to expand...
Click to collapse
http://opengapps.org/#
---------- Post added at 07:16 PM ---------- Previous post was at 07:14 PM ----------
KenithO said:
Do you know of any posts concerning the reliability of alternate sources?
Click to expand...
Click to collapse
Not off-hand.
digixmax,
Thanks for the links! Somehow I thought the various builds were CyanogenMod and searched for "CyanogenMod Pico" but found nothing.
Looked over "Info on different package types" http://forum.xda-developers.com/andr...pps-5-t3074660 and am interested in PICO MODULAR PACKAGE ANDROID 5.1 DOWNLOAD LINKS (~43MB).
Question: Is a Pico Modular package available for Android 4.4.4 KitKat? Am guessing No.
To restate I would like to use my Nook Tablet 16 Only as a Multimedia Player and for reading DOCs and PDFs.
Since I only side load apps is it possible to eliminate Google Play Store, Google Calendar Sync, and the following Play Store application and leave only the core Google system base?
[GAPPS][DAILY] Open GApps for Android 5.1,5.0,4.4; arm,arm64,x86,x86_64
http://forum.xda-developers.com/showthread.php?t=3098071
[GAPPS][DAILY] Open GApps for Android 5.1,5.0,4.4; arm,arm64,x86,x86_64
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
Am trying to do my homework so have been searching for early articles about the Nook Tablet.
Found "How To Sideload (Almost) Any Android App On The Nook Tablet" by K. T. Bradford http://www.gottabemobile.com/2011/11/16/how-to-sideload-android-apps-nook-tablet/
Am wondering if this Nook originally had OS 1.4.0? Does anyone know how to find out? If yes is there an easy way to go back to it? That way I would get a baseline. If no I hope someone has found a workaround!
The 1st app I would like to install is a File Manager and would appreciate any recommendations.
Since OS 1.4.3 is listed as Android 2.3 checked Google Store for FMs that will run on this or older and found X-plore File Manager 3.78 (2.3), File Manager (File transfer) by Cheetah Mobile Tools (Varies with device?),
SD File Manager 1.0.9 by MobilDev (2.3), File Manager by 1.1 by IT STARS (2.3), File Manager 1.31 by xFrame Labs Tools (2.3)
Hi champ1919,
Thanks for the link! I have a lot of catching up to do concerning Open GApps!
Liked DL page http://opengapps.org/ for giving a quick overview of all the options!
Saw there is an X86 ver for 4.4 to 6.0 Nano. Am wondering if I can install these on a std 32bit PC?
Have been searching and found "Advanced Features and Options", "Removal of Stock applications", and "Universal Application Removals"
https://github.com/opengapps/opengapps/wiki/Advanced-Features-and-Options These give you a lot of options!
Any good tutorials?
OK guys, I'm updating a 16GB Nook tablet, it has 1.4.3.
From what I've pieced together, I need to create a bootable TWRP sdcard and flash the root file then flash the TWRP 3.0.0-0(the acclaim works for the old Nook?) Then flash CM12 or CM13?
I'm starting from scratch and these guides are rather old so I'm trying to make sure I use the most up to date recovery and ROM available but with everything spread through different guides its a little confusing to decide which steps and files I need and which ones I don't considering I'm trying to go from stock to TWRP and CM12/CM13 in as few steps as possible.
Droidriven said:
OK guys, I'm updating a 16GB Nook tablet, it has 1.4.3.
From what I've pieced together, I need to create a bootable TWRP sdcard and flash the root file then flash the TWRP 3.0.0-0(the acclaim works for the old Nook?) Then flash CM12 or CM13?
I'm starting from scratch and these guides are rather old so I'm trying to make sure I use the most up to date recovery and ROM available but with everything spread through different guides its a little confusing to decide which steps and files I need and which ones I don't considering I'm trying to go from stock to TWRP and CM12/CM13 in as few steps as possible.
Click to expand...
Click to collapse
You can look at this thread for combinations of files that worked. I'm in there later in the mix and that's how I ended up with CM 12.1.
Looking at the SD card I prepared I can see everything I used except for the TWRP version because it was renamed. At this point I would just use one of the versions mentioned in the thread I just referenced for someone who succeeded at 12.1 (or if you want 13.0, there is a separate thread for that). Just know that TWRP gives error messages during the preparation process (at least my version did--mentioned in the thread) and these can be ignored.
The rest of the files I used with success:
cm-12.1-20151117-SNAPSHOT-YOG7DAO1K6-acclaim.zip
flashable_CWM_6.0.4.8_chrmhoffmann.zip
open_gapps-arm-5.1-nano-20160109.zip
FWIW, the file size on the TWRP version I used shows as 7516 KB.
Hello Ken,
All CMs are somewhat slower that stock Android from BN. You will also loose the proper behavior of tablet when you connect cable to charger - stock OS wakes tablet from sleep when tablet gets connected to charger, CM does not, so you will have to wake it up first, otherwise tablet will not charge. Then, under every CM build RAM (under 'About Tablet') is stated 672 Mb, but under stock OS RAM is 1024Mb. Don't know is B&N trick us or not.
Next, if tablet left asleep for some prolonged period its time/date gets frozen, so when you wake it up it will show some wrong time/date and it does not auto-update on wake up, so you will have to manually update it by going to proper menu in Settings.
Tablet definitely lags compared to stock (in my opinion), especially when apps upgrade themselves and/or you turn on the WiFi - it's total hell. Also, apps like FB can take forever to install.
I tried CM12.1 but decided to get back to CM10.2.1. I also use alternative launcher, cause native one works in landscape mode and nothing made it to run in portrait.
Btw, in newer CMs you will loose access to some of the internal storage and to recover it - you will have to repartition your tablet.
Hope my info helps a bit.
PepeladZ said:
Hello Ken,
All CMs are somewhat slower that stock Android from BN. You will also loose the proper behavior of tablet when you connect cable to charger - stock OS wakes tablet from sleep when tablet gets connected to charger, CM does not, so you will have to wake it up first, otherwise tablet will not charge. Then, under every CM build RAM (under 'About Tablet') is stated 672 Mb, but under stock OS RAM is 1024Mb. Don't know is B&N trick us or not.
Next, if tablet left asleep for some prolonged period its time/date gets frozen, so when you wake it up it will show some wrong time/date and it does not auto-update on wake up, so you will have to manually update it by going to proper menu in Settings.
Tablet definitely lags compared to stock (in my opinion), especially when apps upgrade themselves and/or you turn on the WiFi - it's total hell. Also, apps like FB can take forever to install.
I tried CM12.1 but decided to get back to CM10.2.1. I also use alternative launcher, cause native one works in landscape mode and nothing made it to run in portrait.
Btw, in newer CMs you will loose access to some of the internal storage and to recover it - you will have to repartition your tablet.
Hope my info helps a bit.
Click to expand...
Click to collapse
This further reinforces my feeling that the CM flashings are somewhat idiosyncratic (at least on the Nook Tablet). I've run both 10.2.1 and 12.1 (current) on my tablet and never saw the clock update issue described. In 12.1 the AM/PM indicator had update issues, but I solved that by disabling the cLock widget and installing Chronus from the PlayStore.
Sluggish is as sluggish does, I guess. Running CM 12.1 is no more sluggish than my cheap KitKat LG smartphone I use as an mp3 player. I have to agree that sometimes the tablet just has a bad time of things. This happened a lot after my initial 12.1 installation and there were many odd things that needed fixing. I just kept at it until it is finally running as well as 10.2.1---even better since it now boots reliably every time, whereas with 10.2.1 there were many times when I would boot to a black (backlit) screen. So now I shut it down every night and boot up the next morning without any problem.
The moral seems to be that you just need to try. Keep a backup of the stock system in case you have "buyer's remorse". Don't give up right away. Reflash if things are just a mess, but if only a few things are wonky, work with the tablet for a week or so. It seems to get better after each reboot. Decide for yourself whether the reported sluggishness of the tablet is something that you notice for the apps you are using. A lot of it is about expectations.
nmyshkin said:
I've run both 10.2.1 and 12.1 (current) on my tablet and never saw the clock update issue described. In 12.1 the AM/PM indicator had update issues, but I solved that by disabling the cLock widget and installing Chronus from the PlayStore.
Click to expand...
Click to collapse
The thing is that I tried one of the latest 12.1 with the same results. I don't think the clock problem comes from cLock widget but is related to deep sleep mode or something like that.
nmyshkin said:
This happened a lot after my initial 12.1 installation and there were many odd things that needed fixing. I just kept at it until it is finally running as well as 10.2.1---even better since it now boots reliably every time, whereas with 10.2.1 there were many times when I would boot to a black (backlit) screen.
Click to expand...
Click to collapse
Well, I switched to CM since 10.x and followed along till 13.x came out. So I was on 12.1 for quite some time and tried fresh builds quite frequently, doing 'full reset' install. Btw, I've never had unreliable boots.
nmyshkin said:
So now I shut it down every night and boot up the next morning without any problem.
Click to expand...
Click to collapse
Yes, turning it off is the only way to keep clock right.
Hi all,
Hope I'm posting this in the right place. If not, please move.
I have Remix_OS_for_PC_Android_M_64bit_B2016072603 installed as a virtual guest in Virtualbox 5.0.24_Ubuntu r1083 with Xubuntu-core 16.04 as the host machine. Using a Toshiba Satellite Pro L510. Took me four days to nut out how to get to this point, but installed and booting and stable now.
My issues:
1/ Location: When I try to run an app from Play Store it thinks I'm outside of Australia/New Zealand (the app I'm trying to run is specific to those regions). I'm in Australia, the app works fine on my phone (am logging in exactly the same way).
(* Update: I installed GPS Status and it tells me GPS is not switched on. Was hoping to then change the location with Fake GPS, which I also installed. It won't do anything with same message: GPS not enabled or similar.)
2/ Resolution: The screen defaults to portrait, as expected I suppose, but I have a 1366x768 monitor and it doesn't fit in the screen. Consequently, I have a scroll bar because as Virtualbox Guest Additions is not compatible with Remix OS at this point there is no mouse integration (I need to hit Right Control to use mouse in host and same to use in guest again). I need to press a bunch of keys to just scroll the screen up and get back to where I was going. :|
Other than that, all working great, Remix OS is great, thanks to the team that created it. The main reason I was wanting to use it is to use this one app on my computer (AFL Live) and plug my computer into the TV. I don't use my phone for anything other than that one app, SMS and the occasional call so I am by no means an Android junky. In fact, before this, I knew very little about it (but a lot about Linux/Ubuntu).
This install has been a quest, a learning curve, and these are my last two hurdles so I'm calling for help if it's out there. Trawled the net, tried some things, but have hit a brick wall with these two problems.
My first post so not sure of the protocol. If these two issues should be the subject of two separate threads, mods please advise and I will edit accordingly and create a new thread.
Tnx in advance.
(* Further update: Just having a read of this: http://forum.xda-developers.com/remix/remix-os/remix-os-installation-rooting-t3293769
Wondering if rooting the device would allow me to change any of these, in particularly, the location to Australia where it should be, or switch on GPS so my app can see where I actually am. I'm presuming it thinks I am in the Cocos Islands or somewhere else!)
(* And further update: The screen resolution was as easy as typing Alt+F1 to launch a terminal then 'wm size 1366x768'. That looked terrible, though, so changed it to 1048x768 (from memory) and it is good enough, though not perfect. I may be able to get closer with further tweaking. Now the last, and most important, hurdle to leap: How do I get Remix OS, and more specifically my AFL app, to know I'm in Australia. Frustration. It's taken about ten days, on and off, to get here and still not quite where I want to be, but hopefully my travails can help someone else along the way ...)
Gave up on it. If anyone comes up with a way of running Remix OS in Virtualbox and setting the location, please post. Guestadditions would probably fix it and maybe one day ROS will be compatible with it.
On the other hand, I did learn a lot more about Android than I cared to know, but am now thinking about buying my first ever Android tablet to do the job with a USB/HDMI adapter.
After looking at the Index thread, it seems as if Lollipop 5.1 is the latest version of Android that is safe for an HP Touchpad. Am I understanding this correctly?
Also, if I install that one, does it wipe out WebOS? I guess it doesn't matter if so because from what I'm reading, it's completely outdated and no longer supported. Also, I'm locked out and cannot remember the passcode anyway.
No version of Android is supported on the TouchPad, therefore there isn't a 'safe' version. You'd have most success updating to current (7.1.2+) firmwares. As a TouchPad modder, these versions are the fastest and most supported by Play Store. The initial process of installing 'moboot' for the first time can be daunting, so look into using which ever version of Android is used in jcullins' Toolbox tutorial. Once moboot and TWRP are installed, you can pretty much try whichever rom you want, as this device is near impossible to brick.
Good luck!
mrlaugh01 said:
No version of Android is supported on the TouchPad, therefore there isn't a 'safe' version. You'd have most success updating to current (7.1.2+) firmwares. As a TouchPad modder, these versions are the fastest and most supported by Play Store. The initial process of installing 'moboot' for the first time can be daunting, so look into using which ever version of Android is used in jcullins' Toolbox tutorial. Once moboot and TWRP are installed, you can pretty much try whichever rom you want, as this device is near impossible to brick.
Good luck!
Click to expand...
Click to collapse
Can you please link me to a/the tutorial for the version you suggested?
ashleyquicik said:
Can you please link me to a/the tutorial for the version you suggested?
Click to expand...
Click to collapse
Try the below link which points to the updated guide on how to install Android on the HP Touchpad.
If you are a newbie on this stuff, you would be a good test on how well this guide is written and if it needs any tweaks to help people follow it with accuracy.
I mean I tested it myself, but I am a "seasoned veteran" LOL, I installed KitKat from this guide and also Nougat the version that was recommend to you. Its all there.
https://forum.xda-developers.com/hp...-guide-alternative-method-to-install-t3575861
DoubleStuff said:
Try the below link which points to the updated guide on how to install Android on the HP Touchpad.
If you are a newbie on this stuff, you would be a good test on how well this guide is written and if it needs any tweaks to help people follow it with accuracy.
I mean I tested it myself, but I am a "seasoned veteran" LOL, I installed KitKat from this guide and also Nougat the version that was recommend to you. Its all there.
https://forum.xda-developers.com/hp...-guide-alternative-method-to-install-t3575861
Click to expand...
Click to collapse
1) So I got it to install (Evervolv Nougat) and my feedback on the tutorial is that it's a bit of information overload. Not sure how easy it would be to simply it though.
2) I could not find a link for Boost (what is that?) or the Keyboard fix. Can you assist (assuming they can be installed retroactively)? The keyboard, for instance, works in Chrome but does not appear on the home screen when tapping the Google Search Bar.
3) And maybe this should be #1...but this Nougat seems to slow things down considerably. I tried installing the game Run Race 3D for instance and it was unplayable. Would an older Android version speed things up or am I just dealing with old hardware that can't keep up?
ashleyquicik said:
1) So I got it to install (Evervolv Nougat) and my feedback on the tutorial is that it's a bit of information overload. Not sure how easy it would be to simply it though.
2) I could not find a link for Boost (what is that?) or the Keyboard fix. Can you assist (assuming they can be installed retroactively)? The keyboard, for instance, works in Chrome but does not appear on the home screen when tapping the Google Search Bar.
3) And maybe this should be #1...but this Nougat seems to slow things down considerably. I tried installing the game Run Race 3D for instance and it was unplayable. Would an older Android version speed things up or am I just dealing with old hardware that can't keep up?
Click to expand...
Click to collapse
Hello AshleyQ,
Well along with the step by step, I added a bit of instruction. For example you said, "I could not find a link for Boost (what is that?) or the Keyboard fix." So I will add a little more "overload" of instruction for what Boost Optimized settings are, in my OP at a later date.
But as per your performance. The reason its slow is because you did not load the following ZIP's in the exact sequence the instructions say. I realize its because you could not find the links for boost and keyboard. If you go to HP_TOUCHPAD's "Master List of ZIPs" in the OP of the guide, or I put it below for convenience, you will see the green list below for Nougat 7.1.2, and find the links you were missing earlier.
https://forum.xda-developers.com/hp-touchpad/general/hp-touchpad-optimize-android-swap-t3901773
and once you click link, hit "page down" 3 times and it will get you to the "Master List of Zips"
Evervolv 7.1.2 Android Nougat
1.Click Here to Download the ROM
2.Click Here to Download the Boost Optimized settings with preset CPU Frequency
3.Click here to download Google Open Apps
Select Platform ARM, Android 7.1 and the Variant you want, Pico is recommended
4.Click Here to Download the Keyboard Fix
As per the Boost Settings always start with 1728, and after that is working good, you can try to flash a higher frequency for speed, and you don't have to re-flash everything just the Boost Zip ( like 1782, or 1836 ) file from TWRP recovery. If it freezes screen just go back and flash lower frequency.
So click each link in the OP, and download the said 4 ZIP files, and follow the Original Post again, with these 4 ZIP's ready to go!!! Do not do this retroactively, but start again from scratch.
And you will be able to play the "Run Race 3D" game!!
Look at this link below, a non-gamer like user HP_TOUCHPAD from Florida, played the game Hearthstone!!! I believe you will be able to play "Run Race 3D", but we would love to hear how your results go, and we will be here to help you get a smooth running touchpad that is 100% Android, with SWAP!!!
https://forum.xda-developers.com/hp-touchpad/general/how-to-play-hearthstone-blizzard-t3924170
@HP_TOUCHPAD
Using these downloads from your Master List of Zips, and running my install method.
AshleyQ the OP'er wants to play Run Race 3D game. Now I am not a gamer at all, but you tried with Hearthstone so I will try now, when I download Run Race 3D game I get the attached errors. But I can run YouTube fine, everything seems fine until I run that game ( Run Race 3D ). What are these errors telling you? I waited till SWAP was over 400 Mb, and I used various boost files, first 1782, 1836 and 1728, but with no luck.
I should point out that I had about 10 minutes where I was running the game with smoothness and doing the jumps and winning the races, but then HP Touchpad started to get sluggish with little mini freezes and it threw my timing of the jumps off and I started to lose, then the error came.
Evervolv 7.1.2 Android Nougat
1.Click Here to Download the ROM
2.Click Here to Download the Boost Optimized settings with preset CPU Frequency
3.Click here to download Google Open Apps
Select Platform ARM, Android 7.1 and the Variant you want, Pico is recommended
4.Click Here to Download the Keyboard Fix
p.s. the 2nd pic is kind of hard to read, I just wanted to show that I ran "running services" and it shows 558 MB of SWAP.
DoubleStuff said:
@HP_TOUCHPAD
Using these downloads from your Master List of Zips, and running my install method.
AshleyQ the OP'er wants to play Run Race 3D game. Now I am not a gamer at all, but you tried with Hearthstone so I will try now, when I download Run Race 3D game I get the attached errors. But I can run YouTube fine, everything seems fine until I run that game ( Run Race 3D ). What are these errors telling you? I waited till SWAP was over 400 Mb, and I used various boost files, first 1782, 1836 and 1728, but with no luck.
In the Developers options --.>> Running Services shows Device Memory been use but does not show the swap.
The FREE in gray color shows the available free RAM, but is not the size of the swap file, for example the system can report 485 MB Free RAM and only use 60 MB of swap.
The best way to see how much swap is been use is by connecting the Tablet to PC using usb, open a terminal window and using adb shell then type
free -h
I should point out that I had about 10 minutes where I was running the game with smoothness and doing the jumps and winning the races, but then HP Touchpad started to get sluggish with little mini freezes and it threw my timing of the jumps off and I started to lose, then the error came.
Keep in mind that the free version of this game have Ads, that is a service that is running in the background and when is time to display the ads is another process getting activated. Android is constantly launching background process it does not seem to care if the device is been use, it will take priority.
Evervolv 7.1.2 Android Nougat
1.Click Here to Download the ROM
2.Click Here to Download the Boost Optimized settings with preset CPU Frequency
3.Click here to download Google Open Apps
Select Platform ARM, Android 7.1 and the Variant you want, Pico is recommended
4.Click Here to Download the Keyboard Fix
p.s. the 2nd pic is kind of hard to read, I just wanted to show that I ran "running services" and it shows 558 MB of SWAP.
Click to expand...
Click to collapse
The reason that I mentioned to wait until it shows 400 MB of free RAM (is not swap) is that Android finishes launching all process and the system is finally "IDLE", it takes that long for Android to finally settle and the Tablet ready to be use..
I just installed the Game, it only took about 73 MB of swap space, but I am testing on DU 9 using completely different settings. I am not a gamer, but it looks very simple, graphics are minimal, it does shows a lot of ads and even launching the Play store to install more games. The issues that I am having is that there is no minimal specification for any App, it only shows the Android version and it will depend on the Device. It will help if an App shows the minimal RAM requirement to run, then the settings can be apply to provide that amount, but is all about guessing. I am not done testing my next settings, I will use this game as a tester.
I applied some settings and tried the game and I won! is very easy to play on the Tablet with a bigger screen but it could be a real challenge on smartphone.
Attached is the screenshot of my victory.
Is work in progress, but the game should play with no issues once I finish the settings.
So what do you guys recommend that I do? I just used Run Race 3d as an example of the sluggishness and really just want an Android version and setup that will give me the best overall (meaning fastest) performance...with games/browsing/etc.
HP_TOUCHPAD said:
I applied some settings and tried the game and I won! is very easy to play on the Tablet with a bigger screen but it could be a real challenge on smartphone.
Attached is the screenshot of my victory.
Is work in progress, but the game should play with no issues once I finish the settings.
Click to expand...
Click to collapse
Congratulations on the RR3D win! I won a few times myself and the man did a little dance on the screen, but then my HPTP got sluggish and I kept crashing into the walls because when I pressed the screen the man would not jump like I told it too. In fact my setup got to the point I could not even take a screenshot it was too sluggish.
But if @ashleyquicik is reading this, please be patient it seems like HP_TOUCHPAD is working on some Universal performance settings that will work for all ROMs, past present and future. In the meantime you could load JC Sullins KitKat 4.4 ROM you will find that link in the 2nd Master List of zips ( RolandD's ) on below install method. I find for YouTube and Podcast apps this current version of Nougat is fine, but once I start playing "Run Race 3D" it gets sluggish. Be sure to follow directions in flashing the ZIP's in order.
HP_TOUCHPAD is now using the Run Race 3D game as a testing app, so you can be sure sooner or later this game will be working, not to win at the game, but to win and beat the sluggishness!!
This is the classic case of MAN vs. MACHINE!!!
https://forum.xda-developers.com/hp...-guide-alternative-method-to-install-t3575861
DoubleStuff said:
Congratulations on the RR3D win! I won a few times myself and the man did a little dance on the screen, but then my HPTP got sluggish and I kept crashing into the walls because when I pressed the screen the man would not jump like I told it too. In fact my setup got to the point I could not even take a screenshot it was too sluggish.
After the first stage of the game was over and I selected to play again, then what seems to be an Advertisement came up, but it was only a black screen, then the image show trying to trick me on touching to install another game, there was no way of getting out of it, then the Play store got launch by itself and then I had to close both. There is a difference when you the user open many apps and place them on the background and when two apps are running at same time, is too much to ask for a 1GB RAM device.
But if @ashleyquicik is reading this, please be patient it seems like HP_TOUCHPAD is working on some Universal performance settings that will work for all ROMs, past present and future. In the meantime you could load JC Sullins KitKat 4.4 ROM you will find that link in the 2nd Master List of zips ( RolandD's ) on below install method. I find for YouTube and Podcast apps this current version of Nougat is fine, but once I start playing "Run Race 3D" it gets sluggish. Be sure to follow directions in flashing the ZIP's in order.
I will provide the settings but I do not want to send the wrong signal as it will allow for any apps, specially games to play. Android's apps are extremely buggy even on the stock devices, just search for an issue and you will find how many users are experiencing the problem and none are related to the HP TP, just regular devices.
HP_TOUCHPAD is now using the Run Race 3D game as a testing app, so you can be sure sooner or later this game will be working, not to win at the game, but to win and beat the sluggishness!!
As you have tested yourself the game will play, you won. It is a very basic game with low graphics., but it provides HUGE Ads and also any other apps that you have installed on the Tablet will impact performance. The sluggishness comes as background services that becomes active, that is why as soon as you connect the Tablet to WiFi, it will slow down, just check Running Services and you see them all, opening and closing plus the google apps updates, it will happen even if the CPU is at full capacity and low ram available, is the way Android works.
This is the classic case of MAN vs. MACHINE!!!
I will call it MAN vs Google!
Here is the explanation for that, I will try to keep it short.
https://forum.xda-developers.com/hp...-guide-alternative-method-to-install-t3575861
Click to expand...
Click to collapse
Android Apps are written in Java, Google does not want to pay license feeds as is offering the OS for free and making revenue on the data it collect from the devices for Ads placement, each device is a Digital Billboard that Google charge for displaying time to companies promoting their services or products.
If you have experience running a Virtual Machine on the Desktop, then it should be easy to understand the concept. Android apps are running inside an open source virtual machine " Dalvik" to run the java code and be display on the screen. To virtualize an OS on the desktop if the PC has 6 GB of RAM, and the guess OS requires a minimum of 4 GB to run, then it must be configure and there will only be 2GB left on the Host OS. Then the speed will degrade for low RAM resources and the HOST can not be use for nothing else. Once the Guess OS has done its job, it can be close down and the Host OS will function normally. But if the correct amount of RAM is not allocated to the Guess it will not boot, or shutdown. That is the same that happen in HP TP with Android, and those settings are apply manually in the build.prop by the manufacture. Everything in Android must be configure manually as the OS is too basic and primitive all settings are device specific according to screen resolution, size and amount of RAM ( Memory ).
Hopefully I explained it or compare it, easy to understand.
HP_TOUCHPAD said:
Android Apps are written in Java, Google does not want to pay license feeds as is offering the OS for free and making revenue on the data it collect from the devices for Ads placement, each device is a Digital Billboard that Google charge for displaying time to companies promoting their services or products.
If you have experience running a Virtual Machine on the Desktop, then it should be easy to understand the concept. Android apps are running inside an open source virtual machine " Dalvik" to run the java code and be display on the screen. To virtualize an OS on the desktop if the PC has 6 GB of RAM, and the guess OS requires a minimum of 4 GB to run, then it must be configure and there will only be 2GB left on the Host OS. Then the speed will degrade for low RAM resources and the HOST can not be use for nothing else. Once the Guess OS has done its job, it can be close down and the Host OS will function normally. But if the correct amount of RAM is not allocated to the Guess it will not boot, or shutdown. That is the same that happen in HP TP with Android, and those settings are apply manually in the build.prop by the manufacture. Everything in Android must be configure manually as the OS is too basic and primitive all settings are device specific according to screen resolution, size and amount of RAM ( Memory ).
Hopefully I explained it or compare it, easy to understand.
Click to expand...
Click to collapse
So having said that...and to sort of reiterate some of what I wrote in my last post, what is arguably the best ROM/procedure to have the best overall performance?
ashleyquicik said:
So having said that...and to sort of reiterate some of what I wrote in my last post, what is arguably the best ROM/procedure to have the best overall performance?
Click to expand...
Click to collapse
It all depends of the intended use from the user.
Does it needs to have a working:
Bluetooth ?
Reliable WiFi ?
Camera ?
Android compatibility with a special App ?
Android Versions are different and that sets the ROM apart, it will not be comparing Apples to Apples from different versions.
If you check my guide I have optimized 7.1.2, 8.1 and 9 to use swap and all those three versions works very similar.
One of the reason that I will be doing an Universal Setting and retro-fit older ROM, is to show that the Tablet will work similar with different ROMs.
I should probably make a version that is completely optimized only for games, that will required to delete unnecessary Android system process and RAM could be about 600 MB Free.
Does it needs to have a working:
Bluetooth ? Yes
Reliable WiFi ? YES
Camera ? Yes
Games really aren't necessary because I'm giving this tablet to someone that won't be gaming.
ashleyquicik said:
Does it needs to have a working:
Bluetooth ? Yes
Reliable WiFi ? YES
Camera ? Yes
Games really aren't necessary because I'm giving this tablet to someone that won't be gaming.
Click to expand...
Click to collapse
I started reading your thread from the beginning as I though that it was all about the 3d racer game.
You have a Tablet that would like to give to someone that has WebOS installed and also another Android version on it, which is 7.1.2 and you found it to be slow.
My recommendations for a newest ROM is the same as everyone on here recommended Evervolv 7.1.2 Android Nougat. You could use older ROMs but some basic apps may not work.
Previously @DoubleStuff provided the information on how to installed Evervolv 7.1.2 and also provided the link to my guide that with instructions.
If you flashed the Automatic_Wipe_All, then the Tablet is 100 % Android with swap and WebOS is gone, which will provide more storage space on the Tablet.
As per my guide the proper way to flash all the zip files provided is as follow:
Evervolv 7.1.2 Android Nougat
1.Click Here to Download the ROM
2.Click Here to Download the Boost Optimized settings with preset CPU Frequency
3.Click here to download Google Open Apps
Select Platform ARM, Android 7.1 and the Variant you want, Pico is recommended
4.Click Here to Download the Keyboard Fix
The Boost optimized settings link (2) will give you the option to download 5 different CPU frequency, start with 1728 after you set up the tablet then try a higher speed, the fastest is 1836, if the Tablet boot into Android after flashing 1836 and use some apps and does not freeze then keep using it, if it reboots or freeze then flash 1782 if still not stable keep flashing lower frequencies.
To have a properly working camera, install this app:
https://play.google.com/store/apps/details?id=net.sourceforge.opencamera&hl=en_US
If you have any issues just ask.
ashleyquicik said:
Does it needs to have a working:
Bluetooth ? Yes
Reliable WiFi ? YES
Camera ? Yes
Games really aren't necessary because I'm giving this tablet to someone that won't be gaming.
Click to expand...
Click to collapse
Well as I talked about in another thread where HP_TOUCHPAD wants to start retrofitting old ROM's with SWAP and Universal boost settings, there is a ROM that most agree is the "greatest ROM of all time", but its an old version of Android called KitKat 4.4.4 by JC Sullins and you can find the link here:
https://forum.xda-developers.com/showthread.php?t=2712680
Now one version later Lollipop 5.1 ( or 12.1 CM ) this same developer JC Sullins created a Lollipop ROM, that HP_TOUCHPAD is working on retrofitting: As @HP_TOUCHPAD said in a previous thread about this retrofit.
"...I Applied all optimization to CM 12.1, but testing. The only problem that I am experiencing is if I open about 8 to 9 apps and then press the square, next to home, it will reboot. I do not know if is the ROM or my settings.
But overall works great with swap. Will be posting new optimized settings, soon...." -HP_TOUCHPAD
And if I am not mistaken he may have finished it, but its not posted yet in his MASTER ZIP's list
What I recommend you do AshelyQ because its so easy and quick to install ROMs with our install methods, I would install KitKat above and test it for a day or two, then install another one maybe 7.1.2 and again test it, and maybe even another. And then you can pick the one you think meets you or your friends needs the best and stick with that ROM.
I am going to install HP_TOUCHPAD's retrofitted Lollipop ROM ( when HP_TOUCHPAD posts the settings ) and try to run "Run Race 3D" on it....I will report back with my findings.
HP_TOUCHPAD said:
<-SNIP->
To have a properly working camera, install this app:
https://play.google.com/store/apps/details?id=net.sourceforge.opencamera&hl=en_US
Click to expand...
Click to collapse
Hmm ... I still get critical camera errors, even with the Open Camera app, even after a couple of reboots.
Do Not Touch said:
Hmm ... I still get critical camera errors, even with the Open Camera app, even after a couple of reboots.
Click to expand...
Click to collapse
The stock camera App of 7.1.2 works, but colors and orientation shows incorrectly, but it works on Open Camera.
DoubleStuff said:
...snip....
I am going to install HP_TOUCHPAD's retrofitted Lollipop ROM ( when HP_TOUCHPAD posts the settings ) and try to run "Run Race 3D" on it....I will report back with my findings.
Click to expand...
Click to collapse
Well I have not tested JC Sullins Lollipop ROM with Universal settings yet, but I just installed JC Sullins 4.4 without swap or any special settings, just the ROM and the GApps, and I am happy to report the "Run Race 3d" game went well, I made it to the BONUS Level and earned 146 coins with lots pomp and circumstance, and was getting adds everytime I completed a race, but I waited 5 seconds then pressed the "X" and things went well. So now I am very curious how these old "great" Android versions will work with HP TOUCHPAD'S Universal settings.
3 days ago I was not a gamer, but I guess I am now!!! LOL The HP Touchpad even had enough memory to take a screen shot.
Anyone using one of these? There seem to be several similar models sold (at least in the USA) but it seems like everyone here is using either IPTV-only boxes, or boxes with DVB tuners.
The Cyberbox has a p231 board with an S905D SoC, 2GB RAM, & 16GB ROM, and it runs Android 7.1.2. The box comes with root access as a developer option, making it easy to mod (but also a bit dangerous). One slightly worrisome issue is that the Cyberbox doesn't seem to come with a reset button behind the composite A/V port or anywhere else, so there's no easy way to boot a recovery image if you brick it. It does seem possible to install a micro SD card and a reset switch if you're good at soldering tiny SMC components (which I'm not). Luckily I haven't bricked mine (so far).
I don't know much about the Leelbox Q5 but I've heard it's similar. I've seen threads here on the earlier Leelbox models (Q4 and less) but nothing on the Q5 yet
The MagicSee 300 also seems to be a very similar box, but it has a DVB tuner for FTA satellite and European/Australian OTA broadcasts instead of an ATSC tuner.
With respect to the iView Cyberbox specifically, I've done a little work fixing it up. Mostly minor stuff: improving the look of the launcher (a version of DroidLogic's MBoxLauncher), fixing iView's slightly screwed-up boot animation, installing TWRP recovery (got lucky; the S905X/S912 version 3.2.1 of TWRP works fine except that compression doesn't seem to work during backups) and Magisk (to get some control over root access).
I do have some questions for the more knowledgeable members about my Cyberbox:
My Cyberbox came with Chrome version 66. But try as I might, I couldn't update it! Play Store would download the latest version but it would fail to install. Every time. I ended up just deleting Chrome from /system/app entirely and installing it as a user app! So now I'm up to date, but does anyone have an idea why it wouldn't update normally like most system apps?
Play Store says the Firefox browser is incompatible with my Cyberbox. So I installed an old version (52, which I downloaded for my old pre-NEON Samsung Captivate Glide). Version 52 installed and seems to run fine, but why is the latest version incompatible? Doesn't the S905D support NEON instructions? Edit: AIDA64 says it does support NEON so that isn't what makes newer FF versions incompatible.
This third question isn't specific to the Cyberbox. I've seen lots of folks asking about this issue with their own boxes, so it's evidently a common feature of many of these TV boxes. The system always starts the Mbox Launcher, even if you install a different launcher and make it the default. I realize I could just replace /system/app/MboxLauncher/MboxLauncher.apk with my favorite launcher's .apk, but why do I have to? Why can't I just set my default launcher as I do on a phone? Clearly the MboxLauncher app must be hard-coded in the system somewhere, but where?
Wallpaper does not work at all on this box. The Mbox Launcher has a built-in background, but without wallpaper, any other launcher displays with a solid black background. But any attempt to set wallpaper either crashes or just doesn't do anything. There is a default wallpaper (/etc/default_wallpaper.png) but it never appears anywhere and can't be selected as the wallpaper either. Anyone have an idea why this might be?
Possibly related to the wallpaper issue, there's no status bar or navigation bar. Anywhere.