I relocked my bootloader a couple hours ago and after rebooting my phone threw me into eRecovery and i cant boot into the system. I tried dload method but i get a failed message and I dont know if its because of the firmware file or something else. Fastbook flash methods arent working because of the relocked bootloader.
Does anybody know a solution?
Related
Hello guys,
I tried to update my phone to marshmellow, it got stuck at 95% and after it it entered a bootloop, I thought on just installing a custom recovery and take it from there but when I use fastboot it gives me a Remote: command not allowed error, I have my bootloader unlocked, I am thinking this has to do with not having USB debugging enabled, I can´t access the phone to activate it though. I have also tried to flash lots of stock roms through sd putting them on dload folder on Sds root but it fails right away at 5% it says update install failed, at this point Im not sure what to do... Any ideas?
thanks
Hello guys,
i wanted to upgrade my Ressurection Remix ROM and managed to softbrick my phone. While flashing the software (Flashing system partition unconditionally) TWRP got stuck.
My phone got an unlocked bootloader and i already tried to flash the global MIUI ROM via EDL and also fastboot. The flashing process is successfull but after i restart my phone i'm stuck at the MI Logo with the moving Android Circles for loading.
I let this run for ~6 hours, no progress at all.
I also tried flashing the Global DEV Rom, same as above.
Factory Reset via Recovery Mode (with MI Suite) also didn't do the trick.
I think something with the bootloader went wrong. Any ideas to unbrick it?
I can access Fastboot and EDL Mode, unlocked Bootloader. I also got a TWRP backup with System and Data Partition, but currently only the original Revocery is installed.
Any help is very much appreciated, thank you.
Did you tried using this guide to flash stock firmware/recovery?
http://en.miui.com/a-234.html
Yes, the problem is not to flash the Fastboot ROM, but after successfully flashing the ROM i got stuck at the MI Logo with the loading Android dots
That's weird.. this bootloop usually happens when you flash stock MIUI and still have TWRP installed, can you check if you have stock recovery after fastboot flash?
After i flashed the global DEV ROM i got the stock recovery where i can choose between Wiping Data, switch to MI Suite etc.
Edit: Its not really an bootloop, it just gets stuck there without doing anything
Update: Got TWRP back, now if i want to flash any ROM (doesn't matter if stock/custom) i'm stuck at TWRP saying: "Patching system unconditionally..." it stays there for hours.
Any advice in this case?
guys,, i was facing same problem. I also agree that 8012... status does not matter to unlocking bootloader. I was tried all but fail after granted permission. I was tried daily. after 5 days when I tried with old mi unlock tool I got error at 50%. After that restarted my phone and clicked on settings and in developer menu, I watched i clicked on allow unlock bootloader but I forgot to click on usg debbuging. after clicked it I went for fastboot with old unlock tool and I got success. thankyou.
Try my method you will get success. hit like. stay tune. tandob is here to help you guys.
tandob said:
guys,, i was facing same problem. I also agree that 8012... status does not matter to unlocking bootloader. I was tried all but fail after granted permission. I was tried daily. after 5 days when I tried with old mi unlock tool I got error at 50%. After that restarted my phone and clicked on settings and in developer menu, I watched i clicked on allow unlock bootloader but I forgot to click on usg debbuging. after clicked it I went for fastboot with old unlock tool and I got success. thankyou.
Try my method you will get success. hit like. stay tune. tandob is here to help you guys.
Click to expand...
Click to collapse
That has absolutely nothing to do with the problem mentioned above.
Hi! I just bought a Honor 9 STF-AL00, build: STF-AL00C00B201.
As it is the chinese version, I wanted to rebrand it, so I follow the instructions on https://forum.xda-developers.com/honor-9/how-to/guide-honor-9-t3653719.
Unlocking bootloader was successful and as chinese firmware, it did not had a FRP lock.
The first time, rebranding stopped just before the menu.
The second time, I could access the menu and did the install.
But it looks like it did not go as expected because when the phone booted, it did not load TWRP but eRecovery.
So I booted in fastboot, it says phone locked & FRP locked.
I booted once again in eRecovery to download package from server and recovery but it says getting package info failed.
I tried to install stockrom from sd but it didnot work out.
I still have the bootloader code, but now i cant even install TWRP.
Can anyone please help me?
It is a brand new phone, I even havent use it yet and it's already bricked :'(
I install an service full repair stock via dload
http://androidhost.ru/v5
it is working right now.
oblivion2222 said:
Hi! I just bought a Honor 9 STF-AL00, build: STF-AL00C00B201.
As it is the chinese version, I wanted to rebrand it, so I follow the instructions on https://forum.xda-developers.com/honor-9/how-to/guide-honor-9-t3653719.
Unlocking bootloader was successful and as chinese firmware, it did not had a FRP lock.
The first time, rebranding stopped just before the menu.
The second time, I could access the menu and did the install.
But it looks like it did not go as expected because when the phone booted, it did not load TWRP but eRecovery.
So I booted in fastboot, it says phone locked & FRP locked.
I booted once again in eRecovery to download package from server and recovery but it says getting package info failed.
I tried to install stockrom from sd but it didnot work out.
I still have the bootloader code, but now i cant even install TWRP.
Can anyone please help me?
It is a brand new phone, I even havent use it yet and it's already bricked :'(
Click to expand...
Click to collapse
You can always re-unlock your phones bootloader again, the key is always same, then flash or boot twrp with fastboot.
Some developers says the command for oreo is: fastboot flash recovery_ramdisk [file name] but I used this: fastboot flash recovery_ramdisk_a [file name]
You even can try to just boot twrp without flashing it to your recovery by simple typing: fastboot boot [file name]
If fastboot can flash twrp, turn your phone off then hold volume up/+ and power button same time and hold them until the state of unlocked warning appears.
You can use dload method or you can use HuRupdater method to flash firmware. You'll find introduction for how to do it.
Just search on xda
hello i have oone Mate 20 Pro L29 where is the recovery partition dmaged
Bottloader is locked
i do a update and phone turns off completely
now it starts to recovery and if i try to restore over wifi it always failed
also recovery not shows me anymore usb update or sd update
if i try it with hisuite and hstool to recover fastboot shows me
error!
func no : 11 (recovery image)
error no : 2 (load failed)
is there a way to unbrick it to flash software new?
maybe if no other way than with a testpoint
or can i do something over fastboot
but i dont think so cuz is BL Locked
thanks for all help
Have you tried dload method? Do you got an otg stick??
I am currently trying to install LineageOS on my phone. I personally have never unlocked or reinstalled a new operating system on my phone. I looked on some XDA forums for some guides and i found one and followed the steps. I unlocked my phone and I installed a custom TWRP because I was trying to downgrade the phone back to android 11. Once i was done flashing the file to the phone and rebooted it doesn't boot anymore and only gives me a booting screen for a few seconds after I hold down the power and volume up button for a few seconds nothing else works. I have use the MSM tool and put my phone into EDL mode and it detected the phone with a black screen. Every time I use the tool it works till about 18% then it gives me a Sahara communication failed error and then my phone gets out of EDL mode.. I installed all the drivers needed on my PC and used multiple USB 2.0 slots but it still fails. Any help would be appreciated.
There are warnings in the TWRP thread for the N200 that it is broken and should not be flashed.
I have written an easy to follow guide here to downgrade to A11 with Fastboot Enhance.
Unfortunately, now that you have used MSMTool on the phone, it is now bootloader LOCKED. This tool should be the last resort only if you are already hard bricked. You could have gotten the phone into fastboot if either boot.img was still intact and re-flashed the rom with a still unlocked bootloader. The phone will change slots after so many failed boots.
Now that your boot loader is locked, the only tool that can modify the phone is MSMTool. If you can get into Recovery, do delete user data and try again.
Otherwise, you will need to get an RMA and send phone back to OP.
scanman0 said:
There are warnings in the TWRP thread for the N200 that it is broken and should not be flashed.
I have written an easy to follow guide here to downgrade to A11 with Fastboot Enhance.
Unfortunately, now that you have used MSMTool on the phone, it is now bootloader LOCKED. This tool should be the last resort only if you are already hard bricked. You could have gotten the phone into fastboot if either boot.img was still intact and re-flashed the rom with a still unlocked bootloader. The phone will change slots after so many failed boots.
Now that your boot loader is locked, the only tool that can modify the phone is MSMTool. If you can get into Recovery, do delete user data and try again.
Otherwise, you will need to get an RMA and send phone back to OP.
Click to expand...
Click to collapse
Sorry I should have written more details but I currently have a hard bricked device. It will not boot and It failed to boot like 20 times. It will not enter fastboot or even get past the logo when you first turn it on. I did use MSM tool after it wasn't letting me into fastboot. Thanks for the help and I will send it back.
z67gp said:
Sorry I should have written more details but I currently have a hard bricked device. It will not boot and It failed to boot like 20 times. It will not enter fastboot or even get past the logo when you first turn it on. I did use MSM tool after it wasn't letting me into fastboot. Thanks for the help and I will send it back.
Click to expand...
Click to collapse
Fix Sahara communication failed error in MSM Download Tool
In this tutorial, we will show you how to fix the Sahara communication failed and other related MSM Download Tool errors.
www.droidwin.com