Hi guys:crying::crying::crying:, I need to revive my tablet, try to make it root and then I do not boot, try to flash it and use a ROM Archos-101d-Neon tablet, after that no longer shows signs of life, but flashtool still recognizes it. I need the original ROM of the tablet pixi 3 (10) and to see if I can rescue her. If someone can provide me the ROM or if you can help me solve the problem I would appreciate it. I'm waiting for any help. Greetings.
alvarmat said:
Hi guys:crying::crying::crying:, I need to revive my tablet, try to make it root and then I do not boot, try to flash it and use a ROM Archos-101d-Neon tablet, after that no longer shows signs of life, but flashtool still recognizes it. I need the original ROM of the tablet pixi 3 (10) and to see if I can rescue her. If someone can provide me the ROM or if you can help me solve the problem I would appreciate it. I'm waiting for any help. Greetings.
Click to expand...
Click to collapse
I have the same problem, I readed in other posts you can use oficial program "Mobile Upgrade S 4.5.4" of alcatel to try revive your tablet. In my case it looks like working, downloaded some files but later the program dont reconogize tablet in the step 3/4 and tablet keep in boot loop.
Please someone with stock room upload it to mega or some filehostin
deceiver7 said:
I have the same problem, I readed in other posts you can use oficial program "Mobile Upgrade S 4.5.4" of alcatel to try revive your tablet. In my case it looks like working, downloaded some files but later the program dont reconogize tablet in the step 3/4 and tablet keep in boot loop.
Please someone with stock room upload it to mega or some filehostin
Click to expand...
Click to collapse
alcatel one touch pixi 3 (10) WI-FI ? or 3G ?
on 3G (9010) a lot of information
very necessary for wi-fi (8079).have on hand?
download this official updater: https://1drv.ms/u/s!AvUqW-s0ZKJvhVoy4gT1Oiynk8Av choose your model (mine was 8079 - made by TCL as stated in the box).
Hello
@calculo. The program doesn't recognize tablet in the step 3/4 and tablet keep in bootloop. I need the Stock Rom to be able to use it with Sp Flash tool. If you could upload it, I would appreciate it.
Problem solved
I found the software I was looking for (root-alcatel-one-touch-pixi-34-official-t3193624 / page258), Use Sp Flash Tool to format and update, then recharge the battery, then recharge the battery connecting a charger directly on the battery output cables and after all that my tablet resurrected. Thanks for everything.
Guys, need help pls. Got one Pixi 3 3G 10 dual sim device (9010X), went to flash it via SP tool, but it seems I bricked it. Possibly with wrong FW. Now tablet is dead, nothing on screen, but on USB connetion, computer play sound wheni iI connect it . SP and AutoUpdater tools won't recognize it. Any hope here? thanks
EDIT: I got it again recognazible by SPFT by removing the battery, It is flashable again, need correct FW, but can't find it anywhere
Guys need help please! ?
My tablet is dead! "Pixi 3 3G 10 device (8970)" nothing on screen, but on USB connetion, computer play sound when i connect it and receive a message "USB device not recognized" . SP won't recognize it. Any hope here? Thanks
Pixi 3 3G 10 device (8970)
After i tried to upgrade firmware with Mobile Upgrade S Gotu2 it didnt even pass second task only said network error my "Pixi 3 3G 10 device (8970) has nothing on screen and i recive message "USB device not recognized on my computer.
I tried with sp flash tool installed the mtk driver on win7 and on win 10 but it doesnt recognize the usb can someone pls post how to properly install drivers for sp flash
Any help is appreciated
caculo said:
download this official updater: choose your model (mine was 8079 - made by TCL as stated in the box).
Click to expand...
Click to collapse
Thank you, Thank you, Thank you ...... This worked for me after 8 hours of trying to fix my hard bricked pixi phone!:good:
Yep, I have managed to brick my pixi 3 (10). I have tried to root my device, but Kingroot failed.
Then I've tried to TWRP (https://forum.xda-developers.com/showpost.php?p=67953659&postcount=1944) and my device went to bootloop it self with garbled screen (while connected on PC i've heard device connected - device disconnected sound constantly)
And finally I've tried with this https://forum.xda-developers.com/showpost.php?p=72854696&postcount=4 and device stopped with bootloop immediately after I've clicked on Yes in dialog "To begin please confirm that your device's battery is fully charged..."
But it has stopped to boot at all, and now when I connect device to my PC I get message "USB device not recognized"...
Is there any hope, or I should use this tablet as a frisbee?
hola quisiera q alguien me alludara a saver si la rom de la tablet pixi 3 10 8080 es el mismo sistema con el 8079
alvarmat said:
Problem solved
I found the software I was looking for (root-alcatel-one-touch-pixi-34-official-t3193624 / page258), Use Sp Flash Tool to format and update, then recharge the battery, then recharge the battery connecting a charger directly on the battery output cables and after all that my tablet resurrected. Thanks for everything.
Click to expand...
Click to collapse
@alvarmat Could you provide more infomation on the battery charging part? I'm trying to unbrick a Pixi 3 8079 that won't charge, but I'm on the fence of doing something like that for fear it may damage the battery and the circuitry. Which charger did you use?
SOLUTION
Maybe it's late but i hope it helps someone
Chain 2 AA batteries in serial, end to end , connect 2 cables on both ends using electrical tape. - end ground to the metal CPU cover and + end touch solder on red wire coming from the battery for a minute and the device should turn on.
There is a guide on YT using voltmeter but I'm guessing like me you don't have one
Don't use the stupid update tool!
Hey there!
I somehow managed to red light brick my x96 mini s905 1gb/8gb, p282 board!
Now the reset button does nothing. I can't boot from any Burn Cards I've made.
Using USB Burn Tool, yields an error at 4% (for every ROM I try including stock rom)
I now have to short the pins to get my pc to even recognize the box and when it does, it fails at 4% in usb burn tools. No matter what settings I use (erase bootloader, erase flash ect)
I've been told these amlogic devices are next to impossible to actually KILL! So is there anyone around XDA that can guide me here?
I'm not new to flashing ROMs (been doing it since my samsung s3 lol) and I have flashed plenty of android boxes without error until this one!
I have a feeling I somehow deleted the bootloader! WHAT DO I DO NOW?!?!
Thanks in advance. Hopefully I've given enough information.
no solution ever for this brick?
found a possible solution
Hi, I just openend a thread where I was able to unbrick my x96mini box
https://forum.xda-developers.com/an...lved-bricked-x96mini-red-led-display-t3992403
I think the problem with this is the power cable is not being conncted after USB detection.
The board doesn't have enough power through USB alone to properly work, so connecting the power jack is mandatory. I failed the first flashing attempt for this reason.
Hope this helps, even when it has been months since OP.
Hi folks, I'm hoping someone can help me unbrick my MXQ Pro 4k. I've searched high and low for the stock firmware but it is nowhere to be found. My box seems to be a peculiar variant and the specs are as follow:
S905x 1GB/8GB S905XQ_V2.0 2017.05.16
SV6051P Wifi
SK Hynix H27UCG812ETR DDR3
It became bricked when I tried to flash different atvXperience firmware img files with the Amlogic USB burn tool. I had successfully flashed it with a version posted by minixfreak on the freaktab forums.
Although not with exactly the same specs, it worked pretty well except for the remote control wouldn't function. So I tried to flash again with what I thought was the stock firmware but unfortunately, that bricked the box pretty good. I tried to revert to the atvXperience firmware that worked from the post, but it now always fails at 7% when trying to format with USB tool. In all cases, I've tried every possible combination of pushing in the reset button in the AV port, shorting the NAND pins, switching the order of USB ports... The box always has a red light when powered and is always recognized by the USB Burn Tool driver when connected to the OTG port on the box but always stops at 7% when it attempts to format.
I hooked up a serial usb/ttl cable to capture boot output, turned on the box and it seems the box is in an infinite loop with the following output:
LOOP:8F;EMMC:800;NAND:85;SD:800;USB:8;LOOP:90;EMMC :800;NAND:85;SD:800;USB:8. It appears the bootloader is corrupt or maybe has been erased.
I tried making a bootable sd card using both burncard maker and bootcard maker but that didn't work either as it can't get past intial boot attempt, even pressing reset or shorting nand pins. I'm not sure if it's because of the boot loop or perhaps incorrect firmware. I haven't been able to find the definitive stock firmware anywhere. I would appreciate help in finding this elusive firmware.
I've scoured the internet for a solution and tried many different things but nothing can get me out of this loop. I'm now at a dead end.
I once had a bricked router that I was able to fix by connecting usb/ttl and putty and repeatedly hitting Ctrl-C after rebooting to get a CFE prompt. At that point I was able to manually flash the router with firmware and revive it. Maybe there's a tool available that would possibly do something like that with the android box?
Also possible I guess that something in the hardware is toast and it's just a paper weight now. Anyway, any help and suggestions would be appreciated.
Hello,
In this days i got an mxq pro 4k from a friend of mine.
The problem was that the mxq pro randomly didn't work for him, and just went to recovery every time. He preferred to buy a new one.
I tried to fix it with the sd card and eventually i got some positive fixes. But i didn't like the firmware installed. "It was slow and horrible" "i don't remember the name"
So i decided to reinstall another firmware but this time with a usb male-male cable.
First of all a lot of firmwares didn't work, they weren't loading in rk batch tools or usb burning tool.
"USB burning tool doesn't even find my device".
Then a day i ****ed up with android tool and i did an EreaseFlash, and now i think i got it bricked because i can't even get in the recovery.
I saw some troubleshootings that said to short the nand pins, but i don't find them, and i don't know what to do neither.
I would really aprecciate it if someone could help me.
I don't know how to get the links for the photos of the board, because i can't. I'm a new user.
Hi good people, this is my first post since I don't know where else to go.
My phone Vivo V7+ received an OTA update, so I downloaded and installed the updates, but after updating my phone now can't detect SIM card, I tried many different good SIM but still can't be detected.
I tried factory reset but failed, can't revert back to old firmware.
So I spent many hours of researching and watching YouTube tutorials and I tried to flash stockrom via QFIL. First I encountered problem going into EDL mode (which I spent hours of researching too) but solved it by shorting pinout at the back of the phone.
My laptops detect my phone qualcomm 9008 COM3, downloaded two V7+ stock rom and when I tried to flash via QFIL it will always give "Sahara Fail".
Some methods I tried;
1. Putting firmware at bin folder
2. Renaming folder into shorter name
3. Click download fast as soon as phone gets into EDL mode
4. Tried unlocking bootloader via adb but failed
5. Turn on airplane mode in laptops
Hopefully someone can help , thanks.
Anyone? Help? Now i lost my IMEI and i don't know what is the original number
While probably flashing wrong files you wiped baseband data .
To fix your imei you will need this QCN file which you can download from here:
https://mega.nz/#!YZx3hLgJ!RAj-f8X9de_vtQa1xlhRMN-oWw_YEuPwAs9UuwaT0CA
Decrypting key : !RAj-f8X9de_vtQa1xlhRMN-oWw_YEuPwAs9UuwaT0CA
Password: [email protected]
Credits: https://ufixers.com/u/hariichha
Download this tool and replace your Original imei : ( original imei you will find on your original box)
https://download2267.mediafire.com/bc4ykbffhlxg/euosvxp285tr473/QualcommIMEIRebuilder.rar
Example how to use:
https://www.youtube.com/watch?v=GFB0lrzFHtY
Good luck
Thanks @Teddy Lo for replying. All I did was followed the steps how to flash stock rom and I did downloaded the rom of the same model. But the steps that are floating around are not in great detail. And many YouTube tutorials are not in English almost 99% are in Hindi.
After my attempt of flashing I lost my IMEI and I don't have the box anymore (threw them away long time ago, lesson learned).
I guess I need to visit the nearest Vivo service centre for repair.
Thanks again for replying and providing necessary links.
Hi , why you give up so easy ?
1. Download this firmware :
https://www.mediafire.com/file/1f5r...xx.0_msm8953_split_Repairmymobile.in.rar/file
Once you downloaded extract to Desktop ...
2. Now , Run Qfil tool with Administrator and insert each files to right places .
See image bellow
https://ibb.co/09Fb9k5
Select just the way I marked it in the picture!
Let me know if you fixed or not ...
Wow thanks @Teddy Lo for replying.
Why am I giving up? Maybe because I scouted forums and YouTubes for hours and day, and when I tried it on my Laptop it keeps giving the same error over and over.
The big problem now is that I lost my original IMEI (whis is stupid of me not talking note of it before doing anything else), and I threw my box long time ago.
I'm gonna try the link you gave me and let you know how it goes. Thanks.
Hi @Teddy Lo, so I tried flashing again and I didn't get "Sahara fail" this time but instead I got "Firehose fail".
Oh well guess I'll be visiting Vivo .
Thanks again.
SOLVED.
I went to Vivo service center and told them to wipeout everything and downgrade firmware to the previous version and they did it in 20 minutes.
Now my phone is working normally and they got my IMEI back.
Admin please close thread.