Related
Hi,
I'm new to this forum and a beginner to learn about android devices. I have a Gionee E3 android device (Asian version - English) with Android 4.2.1 on it. Unfortunately I have forgot the pattern lock and to make matter worse the following problems are also included -
1) No root - the device is not rooted
2) No USB Debugging
3) No custom recovery (I guess, only (stock recovery), Android system Recovery is displayed when tried pressing volume + and power key combination )
4) No wi-fi or mobile data could be enabled as the lock won't allow even to slide the screen from the top to get quick access to these things.
5) Windows Xp on my pc
I have tried the following -
1) ADB method to delete the gesture.key, but as the device is not rooted, failed with this attempt with several errors.
2) Tried from Cygwin, but the SU command gave error - -bash: su: command not found
3) Tried Aroma file manager zip file from Android system recovery ----> apply update from SD card, returned error - Installation aborted. Tried to resolve by fixing the updater script file through Notepad++ with different versions of Aromafm but nothing works.
4) Tried with several pattern cracking software zip files through Android system recovery ----> apply update from SD card, still getting error - Installation aborted.
Kindly help me to recover my data intact.
Don't want to root the device and there may be the risk of wiping the data off.
I have also tried to backup from Android system recovery ----> backup user data and 300 MB of data has been backup on SD card. Does this include SMS and phone contacts too with whatsapp data also?
Thanks in advance and sorry for long description, just wanted to make sure you guys know all the things I have tried. Your help will be greatly appreciated.
Sam
Hi,
I'm new to this forum and a beginner to learn about android devices. I have a Gionee E3 android device (Asian version - English) with Android 4.2.1 on it. Unfortunately I have forgot the pattern lock and to make matter worse the following problems are also included -
1) No root - the device is not rooted
2) No USB Debugging
3) No custom recovery (I guess, only (stock recovery), Android system Recovery is displayed when tried pressing volume + and power key combination )
4) No wi-fi or mobile data could be enabled as the lock won't allow even to slide the screen from the top to get quick access to these things.
5) Windows Xp on my pc
I have tried the following -
1) ADB method to delete the gesture.key, but as the device is not rooted, failed with this attempt with several errors.
2) Tried from Cygwin, but the SU command gave error - -bash: su: command not found
3) Tried Aroma file manager zip file from Android system recovery ----> apply update from SD card, returned error - Installation aborted. Tried to resolve by fixing the updater script file through Notepad++ with different versions of Aromafm but nothing works.
4) Tried with several pattern cracking software .zip files through Android system recovery ----> apply update from SD card, still getting error - Installation aborted.
Kindly help me to recover my data intact.
Don't want to root the device and there may be the risk of wiping the data off.
I have also tried to backup from Android system recovery ----> backup user data and 300 MB of data has been backup on SD card. Does this include SMS and phone contacts too with whatsapp data also?
Thanks in advance and sorry for long description, just wanted to make sure you guys know all the things I have tried. Your help will be greatly appreciated.
Sam
Hi everyone, I recently bought a Xiaomi Mi box3c and was very disappointed with custom rom and the interface that it came with on it. So surfing the web there are a few tutorials on how to change it and I tried a few but they are not that great either, till finally someone patched the stock android TV Lean back Launcher for it, it took some tinkering but I got it working, this may not be the best way but this is how I did it form the start. This is not my work, I just followed instructions and I have gathered them here. As I am lazy Im not gonna provide pictures for every step but it’s pretty straight forward.
For using some the apps during the process you will need usb mouse cause not every apps supports Mibox remote configuration
As I am a new poster I am not allowed to post any links so change every dot word to an actual . for the links.
1. Turning on the Box and Changing to English
1.1 Download this apk provided by Xiaomi veterans on forum, it’s a shortcut to the stock android setting
drive dot google dot com/open?id=0B16bkj0QSkYnc0k2UUFTU05vSHM 1.2 copy the apk to a normal usb flash drive and connect to mibox and install the apk
1.3 Run it and now you can change the language as in any android device.
2. Downgrading Firmware
All of the root options available for this device are for the older firmware so you need to downgrade the device. (it’s much easier than it sounds.)
2.1 Download the original firmware for MDZ-16-AA from this link: (both are the same thing)
yadi dot sk/d/Yvr1jYflm6GZR androidfilehost dot com/?fid=745425885120695554 2.2 Extract the contents of the downloaded zip file to a formatted usb tick (Fat32). (There should be two files: xiaomi_update and update.zip)
2.3 Put the USB flash drive in your Mi Box and boot in recovery
(How to boot into recovery: Unplug power > press and "hold back + ok" button while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. for some devices its "home + menu" button instead of the previous one.
2.4 the flashing should start and finish automatically. don’t connect the device to WIFI after this step until you have disabled the intelligent update.
(Credits to passerby on xiaomi.eu forums for the guide)
3. Rooting the device
I tried almost all of the rooting apps, none of them worked for me but I have seen people insisting that permroot works for them so I put the link for that, using it is pretty straight forward, download, install on device and try to root with it.
but in case that doesn’t work Kingoroot Windows app will definitely work. this is how to root with kingoroot. For this method you need a USB type A --> USB type A cable.
3.1 First download the kingoroot desktop app from their website
3.2 Install the app on your windows desktop
3.3 Go to your mibox device setting (mibox setting not android stock from part 1) and in Security setting and Enable USB/ADB debugging, device will restart for this setting to change.
3.4 connect your mibox to your desktop and wait for the device to be installed and recognized by windows. (If you are using windows 10 it will detect the device by itself)
3.5 Run the kingoroot app on the windows and let it detect the device, as soon as it detects the device root option will appear, click on root option it and wait
3.6 Kingoroot will try to install an app on your mibox, allow it and then this will continue and finish the rooting process.
3.7 Disable USB/ADB debugging, so you can connect USB Flash drives to the device again.
3.8 Check for the root stastus with rootchecker.
(Credits to passerby on xiaomi.eu forums for the guide)
4. How to flash TWRP to device
4.1 download the TWRP App from this link:
dl dot twrp dot me/twrpapp/me.twrp.twrpapp-18.apk 4.2 Download the android ROM and TWRP image together from this link:
goo dot gl/q5DGED password : Mibox2015 4.3 open the zip file and copy this image file to your USB Flash drive
MDZ-16-AA-AndroidTV-V1\TWRP-RECOVERY\twrp-mdz-16-aa.img
4.4 Connect the USB flash drive to the box and copy the image to device storage
4.3 Install the TWRP app on the device using the USB flash drive
4.4 Run it and select first two boxes.
4.5 Go to flash TWRP option and wait for app to ask permission from SU, grant permission.
4.6 Select TWRP flash and select flash from image. Select the image that you copied to device storage.
4.7 Boot into recovery (by this time you have root access and it’s better to boot to recovery with one of the reboot apps ex. Quick Reboot)
(Now you have TWRP, but the problem is every time you reboot the box, the stock rom overwrites the TWRP files and it goes back to Default recovery, to solve this we need to replace the Rom itself too)
5. Replacing the Rom
5.1 While still in TWRP page, make a small boot backup just so TWRP makes a folder in storage of your device.
5.2 Reboot the device from TWRP (reboot system)
5.3 Now using a File manager (I used X-plore) copy the Rom folder to the same backup folder that was created by TWRP in your storage.
Copy This folder:
MDZ-16-AA-AndroidTV-V1\TWRP\BACKUPS\11608V180037788\2014-12-31--18-01-42_6.9.7.949
To this folder: (Which is already should be there created by TWRP)
Internal Storage\TWRP\Backups\ (your device’s Serial number)\
5.4 Repeat steps 4.6 & 4.7 again to Flash TWRP again, after booting to TWRP go to restore and select file (2014-12-31--18-01-) to restore, swipe to restore and wait for 10-15 minutes
5.5 After restore is done don’t reboot, go back to TWRP main page, go to Wipe then advanced wipe, select Dalvik, Cache and Data to be wiped. After wipe is done reboot system
5.6 When android system boot is complete, go to setting down below and change the language to English and its done.
I hope it helps
Someone posted a tutorial on YouTube, the title of video is "MIBOX 3 MDZ-16-aa ROOT + Install Android TV English".
@[email protected], did you get Netflix to work on it?
dummyaccount said:
Someone posted a tutorial on YouTube, the title of video is "MIBOX 3 MDZ-16-aa ROOT + Install Android TV English".
@[email protected], did you get Netflix to work on it?
Click to expand...
Click to collapse
I tried all the steps.
No google play videos, no voice search and most of all no netflix.
=(
I hate the ****ing Chinese that sold me MDZ-16-aa saying it was the international version.
dont work password androidtv rom....... is Mibox2015?
mdz 16-AA
I faced the same issue.Wrong password.
Thanx for your post [email protected] I am going to use this method for my Mi box3.
As I am going to root any device for the first time, what precautions should I take
that I don't brick it?
Does the Microphone and and Ok button on Remote work normally after rooting by your method ?
Thx in advance....
[email protected] said:
Hi everyone, I recently bought a Xiaomi Mi box3c and was very disappointed with custom rom and the interface that it came with on it. So surfing the web there are a few tutorials on how to change it and I tried a few but they are not that great either, till finally someone patched the stock android TV Lean back Launcher for it, it took some tinkering but I got it working, this may not be the best way but this is how I did it form the start. This is not my work, I just followed instructions and I have gathered them here. As I am lazy Im not gonna provide pictures for every step but it’s pretty straight forward.
For using some the apps during the process you will need usb mouse cause not every apps supports Mibox remote configuration
As I am a new poster I am not allowed to post any links so change every dot word to an actual . for the links.
1. Turning on the Box and Changing to English
1.1 Download this apk provided by Xiaomi veterans on forum, it’s a shortcut to the stock android setting
drive dot google dot com/open?id=0B16bkj0QSkYnc0k2UUFTU05vSHM 1.2 copy the apk to a normal usb flash drive and connect to mibox and install the apk
1.3 Run it and now you can change the language as in any android device.
2. Downgrading Firmware
All of the root options available for this device are for the older firmware so you need to downgrade the device. (it’s much easier than it sounds.)
2.1 Download the original firmware for MDZ-16-AA from this link: (both are the same thing)
yadi dot sk/d/Yvr1jYflm6GZR androidfilehost dot com/?fid=745425885120695554 2.2 Extract the contents of the downloaded zip file to a formatted usb tick (Fat32). (There should be two files: xiaomi_update and update.zip)
2.3 Put the USB flash drive in your Mi Box and boot in recovery
(How to boot into recovery: Unplug power > press and "hold back + ok" button while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. for some devices its "home + menu" button instead of the previous one.
2.4 the flashing should start and finish automatically. don’t connect the device to WIFI after this step until you have disabled the intelligent update.
(Credits to passerby on xiaomi.eu forums for the guide)
3. Rooting the device
I tried almost all of the rooting apps, none of them worked for me but I have seen people insisting that permroot works for them so I put the link for that, using it is pretty straight forward, download, install on device and try to root with it.
but in case that doesn’t work Kingoroot Windows app will definitely work. this is how to root with kingoroot. For this method you need a USB type A --> USB type A cable.
3.1 First download the kingoroot desktop app from their website
3.2 Install the app on your windows desktop
3.3 Go to your mibox device setting (mibox setting not android stock from part 1) and in Security setting and Enable USB/ADB debugging, device will restart for this setting to change.
3.4 connect your mibox to your desktop and wait for the device to be installed and recognized by windows. (If you are using windows 10 it will detect the device by itself)
3.5 Run the kingoroot app on the windows and let it detect the device, as soon as it detects the device root option will appear, click on root option it and wait
3.6 Kingoroot will try to install an app on your mibox, allow it and then this will continue and finish the rooting process.
3.7 Disable USB/ADB debugging, so you can connect USB Flash drives to the device again.
3.8 Check for the root stastus with rootchecker.
(Credits to passerby on xiaomi.eu forums for the guide)
4. How to flash TWRP to device
4.1 download the TWRP App from this link:
dl dot twrp dot me/twrpapp/me.twrp.twrpapp-18.apk 4.2 Download the android ROM and TWRP image together from this link:
goo dot gl/q5DGED password : Mibox2015 4.3 open the zip file and copy this image file to your USB Flash drive
MDZ-16-AA-AndroidTV-V1\TWRP-RECOVERY\twrp-mdz-16-aa.img
4.4 Connect the USB flash drive to the box and copy the image to device storage
4.3 Install the TWRP app on the device using the USB flash drive
4.4 Run it and select first two boxes.
4.5 Go to flash TWRP option and wait for app to ask permission from SU, grant permission.
4.6 Select TWRP flash and select flash from image. Select the image that you copied to device storage.
4.7 Boot into recovery (by this time you have root access and it’s better to boot to recovery with one of the reboot apps ex. Quick Reboot)
(Now you have TWRP, but the problem is every time you reboot the box, the stock rom overwrites the TWRP files and it goes back to Default recovery, to solve this we need to replace the Rom itself too)
5. Replacing the Rom
5.1 While still in TWRP page, make a small boot backup just so TWRP makes a folder in storage of your device.
5.2 Reboot the device from TWRP (reboot system)
5.3 Now using a File manager (I used X-plore) copy the Rom folder to the same backup folder that was created by TWRP in your storage.
Copy This folder:
MDZ-16-AA-AndroidTV-V1\TWRP\BACKUPS\11608V180037788\2014-12-31--18-01-42_6.9.7.949
To this folder: (Which is already should be there created by TWRP)
Internal Storage\TWRP\Backups\ (your device’s Serial number)\
5.4 Repeat steps 4.6 & 4.7 again to Flash TWRP again, after booting to TWRP go to restore and select file (2014-12-31--18-01-) to restore, swipe to restore and wait for 10-15 minutes
5.5 After restore is done don’t reboot, go back to TWRP main page, go to Wipe then advanced wipe, select Dalvik, Cache and Data to be wiped. After wipe is done reboot system
5.6 When android system boot is complete, go to setting down below and change the language to English and its done.
I hope it helps
Click to expand...
Click to collapse
I tried to downgrade my MDZ-16-AA device with the MiBOX3_jurassicpark_gitv_1.3.106.386 file ... but it brings it down only to 1. 3. 114 and not to 1. 3. 106.
Secondly I do not get "ADB Debugging" option. Hence I cannot connect my Mi Box to my laptop.
Can anyone help ?
the correct password is : '@'mibox2015
the quotes are only to avoid mention to xda user "mibo" in xda forum...u don't have to write it in...
mibox v1.5.1
I've troubles to root my mibox, I've the 1.5.1 version.
Can you help me, please ?
Mi box 3C v 1.5.1
Can it possible to do the same for version 1.5.1?
I have Mi box 3C v 1.5.1 and I can't even boot into recovery yet.
Add widevine drm in MDZ-16-AA
To complete your notice, I found a way to launch MyCanal and molotov.tv (not tested for netflix yet).
As you know these apps requires widevine drm.
First download
extractor 4.0 and Xiomi 3S official rom
Then extract update.zip and add in root folder of extractor: system.new.dat + system.transfert.list.file_context
Use Extractor.bat to uncompact system.new
On folder go on system\vendor and copy paste lib folder on USB key.
Does anybody know how to go to recovery mode?
HOLD Back + OK and Home + Option doesn't work for my MDZ-16-AA
the system has been automatically updated yesterday.. :crying:
Thank you so much, I got it installed.
Step 1 can be hard because of the chinese language therefor I used this link:
https://www dot cnx-software dot com/2016/04/12/how-to-change-language-to-english-and-install-apps-remotely-on-xiaomi-mi-box-3-enhanced/
at step 2 I made the mistake that I extracted the update.zip aswell. while I needed to keep it zipped.
I used the app RUFUS to make the usbdrive a FAT32 drive.
at step 3 Kingoroot worked for me, although I needed to restart several times to make the ADB debugging connection work.
at step 4 sending the TWRP files, was a bit of a hurdle. It wwas not possible for me to copt them from the USB stick with ES file manager to the device. I needed to use the USB cable to my computer (ADB off) password: "@mibox2015"
At point 5 I was not able to use my remote or keyboard, I needed to turn off ADB!
At the end allot works, but there is still some bugs:
- MIUI still present. eg. when connecting an usb stick you get a chinese menu. and you are able to get into the old system menu
- unable to get NETFLIX to work
- allot of bloatware, apps I can not disable or delete.
- im unable to disable search by microphone in the UI, which is not supported by the remote of the 16-AA
- im unable to edit the tiles in the homescreen to eg. hide the supersu, market etc. and to put PLEX of KODI more in front
Thanks!!!!
I have rooted my mibox 3c and installed TWRP app
I copied img to device and flash drive, but I can't choose any img in TWRP app...
any method to replace custom recovery?? THX
weiabroad said:
I have rooted my mibox 3c and installed TWRP app
I copied img to device and flash drive, but I can't choose any img in TWRP app...
any method to replace custom recovery?? THX
Click to expand...
Click to collapse
Go through each step carefully, if stuck be clear about what you have done
Sent from my A0001 using Tapatalk
Arquivo converter ROM chinesa para global 3C-16AA
Olá, gostaria dos arquivos para converter a ROM 3C-16AA, você tem whats para contato?
Hey,
Im' trying to get mycanal to work on my mibox MDZ-16-AA.
I copied the lib folder on my usb stick.
it's still not working, isn't any steps missing ?
Thanks.
Secure Check failed error while downgrading
I Got "secure check failed." error while downgrading. What did i do wrong ?
[email protected] said:
Hi everyone, I recently bought a Xiaomi Mi box3c and was very disappointed with custom rom and the interface that it came with on it. So surfing the web there are a few tutorials on how to change it and I tried a few but they are not that great either, till finally someone patched the stock android TV Lean back Launcher for it, it took some tinkering but I got it working, this may not be the best way but this is how I did it form the start. This is not my work, I just followed instructions and I have gathered them here. As I am lazy Im not gonna provide pictures for every step but it’s pretty straight forward.
For using some the apps during the process you will need usb mouse cause not every apps supports Mibox remote configuration
As I am a new poster I am not allowed to post any links so change every dot word to an actual . for the links.
1. Turning on the Box and Changing to English
1.1 Download this apk provided by Xiaomi veterans on forum, it’s a shortcut to the stock android setting
drive dot google dot com/open?id=0B16bkj0QSkYnc0k2UUFTU05vSHM 1.2 copy the apk to a normal usb flash drive and connect to mibox and install the apk
1.3 Run it and now you can change the language as in any android device.
2. Downgrading Firmware
All of the root options available for this device are for the older firmware so you need to downgrade the device. (it’s much easier than it sounds.)
2.1 Download the original firmware for MDZ-16-AA from this link: (both are the same thing)
yadi dot sk/d/Yvr1jYflm6GZR androidfilehost dot com/?fid=745425885120695554 2.2 Extract the contents of the downloaded zip file to a formatted usb tick (Fat32). (There should be two files: xiaomi_update and update.zip)
2.3 Put the USB flash drive in your Mi Box and boot in recovery
(How to boot into recovery: Unplug power > press and "hold back + ok" button while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. for some devices its "home + menu" button instead of the previous one.
2.4 the flashing should start and finish automatically. don’t connect the device to WIFI after this step until you have disabled the intelligent update.
(Credits to passerby on xiaomi.eu forums for the guide)
3. Rooting the device
I tried almost all of the rooting apps, none of them worked for me but I have seen people insisting that permroot works for them so I put the link for that, using it is pretty straight forward, download, install on device and try to root with it.
but in case that doesn’t work Kingoroot Windows app will definitely work. this is how to root with kingoroot. For this method you need a USB type A --> USB type A cable.
3.1 First download the kingoroot desktop app from their website
3.2 Install the app on your windows desktop
3.3 Go to your mibox device setting (mibox setting not android stock from part 1) and in Security setting and Enable USB/ADB debugging, device will restart for this setting to change.
3.4 connect your mibox to your desktop and wait for the device to be installed and recognized by windows. (If you are using windows 10 it will detect the device by itself)
3.5 Run the kingoroot app on the windows and let it detect the device, as soon as it detects the device root option will appear, click on root option it and wait
3.6 Kingoroot will try to install an app on your mibox, allow it and then this will continue and finish the rooting process.
3.7 Disable USB/ADB debugging, so you can connect USB Flash drives to the device again.
3.8 Check for the root stastus with rootchecker.
(Credits to passerby on xiaomi.eu forums for the guide)
4. How to flash TWRP to device
4.1 download the TWRP App from this link:
dl dot twrp dot me/twrpapp/me.twrp.twrpapp-18.apk 4.2 Download the android ROM and TWRP image together from this link:
goo dot gl/q5DGED password : Mibox2015 4.3 open the zip file and copy this image file to your USB Flash drive
MDZ-16-AA-AndroidTV-V1\TWRP-RECOVERY\twrp-mdz-16-aa.img
4.4 Connect the USB flash drive to the box and copy the image to device storage
4.3 Install the TWRP app on the device using the USB flash drive
4.4 Run it and select first two boxes.
4.5 Go to flash TWRP option and wait for app to ask permission from SU, grant permission.
4.6 Select TWRP flash and select flash from image. Select the image that you copied to device storage.
4.7 Boot into recovery (by this time you have root access and it’s better to boot to recovery with one of the reboot apps ex. Quick Reboot)
(Now you have TWRP, but the problem is every time you reboot the box, the stock rom overwrites the TWRP files and it goes back to Default recovery, to solve this we need to replace the Rom itself too)
5. Replacing the Rom
5.1 While still in TWRP page, make a small boot backup just so TWRP makes a folder in storage of your device.
5.2 Reboot the device from TWRP (reboot system)
5.3 Now using a File manager (I used X-plore) copy the Rom folder to the same backup folder that was created by TWRP in your storage.
Copy This folder:
MDZ-16-AA-AndroidTV-V1\TWRP\BACKUPS\11608V180037788\2014-12-31--18-01-42_6.9.7.949
To this folder: (Which is already should be there created by TWRP)
Internal Storage\TWRP\Backups\ (your device’s Serial number)\
5.4 Repeat steps 4.6 & 4.7 again to Flash TWRP again, after booting to TWRP go to restore and select file (2014-12-31--18-01-) to restore, swipe to restore and wait for 10-15 minutes
5.5 After restore is done don’t reboot, go back to TWRP main page, go to Wipe then advanced wipe, select Dalvik, Cache and Data to be wiped. After wipe is done reboot system
5.6 When android system boot is complete, go to setting down below and change the language to English and its done.
I hope it helps
Click to expand...
Click to collapse
I successfully rooted my mibox 3c (MDZ-16-AA) and installed TWRP app and Android TV.
Now I want to go back to the Xiaomi Original Firmware (1.5.25). I tried to use TWRP and the Update.zip, but it did not work. How can I do it? Many thanks!
---------- Post added at 09:59 AM ---------- Previous post was at 09:53 AM ----------
I read from a Chinese forum that the 1.4.32 can also be rooted. As far as I know the Android TV is based on the 1.3.106. Does it make any sense to root the MDZ-16-AA with the firmware 1.4.32 and install the Android TV then?
How I can install twrp and flash gsi rom on Doogee N20?
I found this but I'm doesnt know Russian: pda.ru/forum/index.php?showtopic=955032&st=1220#entry89836105 (I cant post URL because I'm new user, so I delete the "4" from "4pda")
Sorry for my bad English.
צבי זלצברג said:
How I can install twrp and flash gsi rom on Doogee N20?
I found this but I'm doesnt know Russian: pda.ru/forum/index.php?showtopic=955032&st=1220#entry89836105 (I cant post URL because I'm new user, so I delete the "4" from "4pda")
Click to expand...
Click to collapse
That's the Google translation:
A little instruction on how to get RooT. And so, everything that you do, as always, is at your own peril and risk! All data is erased when unlocked! Make BACKUP !!! Is always!!!! I. Unlocking Boorloder-a (required for flashing the phone and everything connected with it): 1. Go to settings -> system -> About phone -> Build number (7 clicks) (Congratulations !!!! You are a developer!) < - About phone -> For developers: Enable USB debugging and OEM unlocking. 2. We connect the phone to the computer and install the ADB usb driver (on the Internet), a connection request should appear on the phone, you need to allow it. 3. Extract files from the N20_utils.rar archive (10.87 MB) (preferably not very far, the root of the disk or the created folder N20 will be there). Go to the Unlocked Bootloader folder and run the bat file, the phone will reboot and display the request "unlock? Yes / no" rocker up - yes / rocker down - no. Naturally, you need to press the volume up, otherwise there were so many actions)) 4. Congratulations! Now, with each reboot, you will have an Orange state (5-second inscription), and the ability to do whatever you want with your phone. II. We sew! 1. For the lazy (who value their time). Download the SP Flash tool (Internet), from the N20_utils.rar archive (10.87 MB) select MT6763_Android_scatter and boot_magisk_20 files for the boot partition, lk_pached for lk, etc. you can even twrp instead of native recovery. Turn off the phone, connect it to the computer and click Download in the SP Flash programs. After the OK circle appears, disconnect and reconnect the cable (easier than a forced reboot). We turn on the phone and put the magisk manager (internet). Congratulations!!! You have a root and no Orange State label! 2. Who wants more and himself: phone to computer -> go to the Unlocked Bootloader folder -> run CMD -> write "fastboot flash recovery" put a space and move the TWRP file with the mouse to the window (fast path to the file) and press ENTER -> reboot the phone to fastboot. Congratulations!!! you have TWRP. Boot into TWRP, skip the encrypted DATE message, go to formatting and format the DATE. Go to mount and connect MTP. A phone will appear on my computer, we drop the files DisableForceEncryption_Treble (disable date encryption), orange_state_disabler_v0.3 (remove orange_state) and magisk.zip (internet) into the memory section. In TWRP, click install all this and rejoice! 3. Who has nothing to do at all: go to the forum thread Development and porting of GSI firmware (Post bullik01 # 71222655) and try what catches your eye. Not all are loaded, but .... (although we do not seem to have an A / B structure, but only "arm64 A / B" were launched) PS: look for additional information here on the forum and for brotherly devices UMiDIGI A5 Pro - Firmware ( Post Xakep1993 # 86772223) Attached files recovery-TWRP_3.3-20191015-1714.img (22.81 MB) DisableForceEncryption_Treble.zip (4.24 MB)
jwoegerbauer said:
That's the Google translation:
A little instruction on how to get RooT. And so, everything that you do, as always, is at your own peril and risk! All data is erased when unlocked! Make BACKUP !!! Is always!!!! I. Unlocking Boorloder-a (required for flashing the phone and everything connected with it): 1. Go to settings -> system -> About phone -> Build number (7 clicks) (Congratulations !!!! You are a developer!) < - About phone -> For developers: Enable USB debugging and OEM unlocking. 2. We connect the phone to the computer and install the ADB usb driver (on the Internet), a connection request should appear on the phone, you need to allow it. 3. Extract files from the N20_utils.rar archive (10.87 MB) (preferably not very far, the root of the disk or the created folder N20 will be there). Go to the Unlocked Bootloader folder and run the bat file, the phone will reboot and display the request "unlock? Yes / no" rocker up - yes / rocker down - no. Naturally, you need to press the volume up, otherwise there were so many actions)) 4. Congratulations! Now, with each reboot, you will have an Orange state (5-second inscription), and the ability to do whatever you want with your phone. II. We sew! 1. For the lazy (who value their time). Download the SP Flash tool (Internet), from the N20_utils.rar archive (10.87 MB) select MT6763_Android_scatter and boot_magisk_20 files for the boot partition, lk_pached for lk, etc. you can even twrp instead of native recovery. Turn off the phone, connect it to the computer and click Download in the SP Flash programs. After the OK circle appears, disconnect and reconnect the cable (easier than a forced reboot). We turn on the phone and put the magisk manager (internet). Congratulations!!! You have a root and no Orange State label! 2. Who wants more and himself: phone to computer -> go to the Unlocked Bootloader folder -> run CMD -> write "fastboot flash recovery" put a space and move the TWRP file with the mouse to the window (fast path to the file) and press ENTER -> reboot the phone to fastboot. Congratulations!!! you have TWRP. Boot into TWRP, skip the encrypted DATE message, go to formatting and format the DATE. Go to mount and connect MTP. A phone will appear on my computer, we drop the files DisableForceEncryption_Treble (disable date encryption), orange_state_disabler_v0.3 (remove orange_state) and magisk.zip (internet) into the memory section. In TWRP, click install all this and rejoice! 3. Who has nothing to do at all: go to the forum thread Development and porting of GSI firmware (Post bullik01 # 71222655) and try what catches your eye. Not all are loaded, but .... (although we do not seem to have an A / B structure, but only "arm64 A / B" were launched) PS: look for additional information here on the forum and for brotherly devices UMiDIGI A5 Pro - Firmware ( Post Xakep1993 # 86772223) Attached files recovery-TWRP_3.3-20191015-1714.img (22.81 MB) DisableForceEncryption_Treble.zip (4.24 MB)
Click to expand...
Click to collapse
Hi, were you by any chance able to get a copy of these files ,Please upload if posssible
The original links are broken and the internet seemed to wipe all traces out, I'm looking for the N20_utils and possibly the Disable force encryption one
Good day
Had the same problem, (English not so good but I know you'll understand). What I did was just installing Corvus OS rom, the 11th version. It's been quite a while since i installed it.
Tried Lineage 18.1 and adding the smallest gapps available, but everytime i get code error 1. I guess it was the twrp 3.3 version i used cause some roms requer the latest TWRP versions. The lineage is installing just right nd can reboot to system with no hiccups.
None of Android 12 gsi versions has ever been able to installed. Cause when i try to install, i get the error of "file too large for the target partition. Tried everything from the net to increase the system partition to at-least 3gig. No success.....
Is anyone who can help to install android 12 even beta version will be ok for my N20 Doogee??
Thanx
flairepathos.info said:
Hi, were you by any chance able to get a copy of these files ,Please upload if posssible
The original links are broken and the internet seemed to wipe all traces out, I'm looking for the N20_utils and possibly the Disable force encryption one
Click to expand...
Click to collapse
The file is in the forum. But to make your life easier here are the link.
https://drive.google.com/drive/folders/18B-srDVia_H4aDt7uvCDUxg2e4R5kVVY?usp=sharing The file is of type .exe and that extracts when you run on the pc, the problem is that I was suspicious about the virus so I threw the file in the total virus (if you don't know what it is, just search) and 6 programs pointed it out as malware but many others didn't find anything including karpersky and bit defender, there to make sure the files were there i renown they from .exe to .zip and I looked and the files really were there but as I don't want to take the risk I didn't extract and I didn't even try anything. The file that fix the encryption are inside doogee n20.exe, the guy said it will be in .exe and when you run it extracts the file in the C folder of the computer I recommend you to rename it from .exe to .zip because if the file have a virus you can screw your pc when running
Da-Judges said:
Good day
Had the same problem, (English not so good but I know you'll understand). What I did was just installing Corvus OS rom, the 11th version. It's been quite a while since i installed it.
Tried Lineage 18.1 and adding the smallest gapps available, but everytime i get code error 1. I guess it was the twrp 3.3 version i used cause some roms requer the latest TWRP versions. The lineage is installing just right nd can reboot to system with no hiccups.
None of Android 12 gsi versions has ever been able to installed. Cause when i try to install, i get the error of "file too large for the target partition. Tried everything from the net to increase the system partition to at-least 3gig. No success.....
Is anyone who can help to install android 12 even beta version will be ok for my N20 Doogee??
Thanx
Click to expand...
Click to collapse
you can use the pixel experience lite https://github.com/ponces/treble_build_pe/releases ( remenber the lite version, because is 2,5 gig) i try and instal in my phone and worked but i cant access my storage so i search and here are the solution https://forum.xda-developers.com/t/...loop-after-any-custom-rom-doogee-n20.4357313/ i dont try it but if you want here are the solution
flairepathos.info said:
Hi, were you by any chance able to get a copy of these files ,Please upload if posssible
The original links are broken and the internet seemed to wipe all traces out, I'm looking for the N20_utils and possibly the Disable force encryption one
Click to expand...
Click to collapse
Hi, did you find N20_utils?
Hello everyone, today I will show you my way how to unbrick hard-bricked Selecline MW7526L - 871023 S4T7IN with mainboard [BND-RK3126-K86-YH A2.4] for free by without InfinityBox CM2RKT v2.01 or others...
The way I figured out on my own without box cost me 2 days of trying searching online and I was very disappointed because there is almost no support for devices like this, and if you find something you can't download without membership, so I pass hard way to figured out the right way to make a live this device again, but I decided to make it very easy for you guys with all already prepared files to save your time .
BEFORE WE START - open your device and check if your mainboard is with code [BND-RK3126-K86-YH A2.4] if not don't try it.
See Pictures:
image 1
https://ibb.co/hcn1R21
Image 2
https://ibb.co/184WBmg
So let's Start
1. Download and extract files to your Desktop drivers , flash tool and firmware:
Edit:
Links updated
#Firmware:
Auchan SELECLINE RK312X v5.1.1 Firmware.zip
drive.google.com
#Driver Assistant
Rockchip DriverAssitant_v4.4
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
#Flash tool
AndroidTool_Release_v2.35.rar | by heatshiver for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
1.1 Install drivers
Now once you extracted file inside you will find Rockchip_DriverAssitant_v4.4 folder, open it and Run DriverInstall.exe in order to install driver.
There’s no need to connect your Rockchip device during this procedure, a very important thing is if you've previously tried to install the Rockchip USB drivers for any Rockchip devices make sure you click “Uninstall Driver” first and then Re-open DriverInstall.exe and click on “Install Driver”.
See steps in pictures:
image 1
https://ibb.co/wYd6SSJ
image 2
https://ibb.co/ypd9B36
image 3
Click on "Run"
https://ibb.co/qpZXTPg
image 4
Click on "Install Driver"
https://ibb.co/0KsxRTW
Image 5
Click “Install Driver”, and depending on your version of Windows the Security below may show up twice during installation. Just click “Install”.
https://ibb.co/FKQTBm3
Image 6
Once driver is installed click "Okay" and Exit from RK Driver Assistant v4.4
https://ibb.co/2v74MyH
1. 2 Now extract downloaded firmware to Desktop or wherever you want.
For me is easy to create one new folder on Desktop with name MW7526L - 871023 S4T7IN
But you can do how is easy for you ...
1.3 Now extract downloaded flash tool and run "AndroidTool.exe" and load all prepared files from Selecline MW7526L - 871023 S4T7IN folder where you extracted files. In my case I extracted to the Desktop so my location is C:\Users\Maksim\Desktop\Selecline MW7526L - 871023 S4T7IN\Flash tool and files\image .And load each one and make sure to check all boxes exept userdata.
See steps in pictures:
image 1
https://ibb.co/Yhy3wc8
Image 2
https://ibb.co/F6fhHMK
Image 3
Check all except the userdata and load parameter file from extracted firmware in my case Selecline MW7526L - 871023 S4T7IN\Flash tool and files folder each img files one by one except the user data and Radial update from Selecline MW7526L - 871023 S4T7IN\Flash tool and files\image folder.
https://ibb.co/Pzq87sw
4. Now press together Vol + / Vol- and plug usb cable and press also Power button for few seconds for device to be detected like Loader inside tool.
Then once is detected press on "Lower Format" and wait to be done. Then again do the same step and now press "Run"and wait for progress to complete full and your device will boot ....
image 1
https://ibb.co/QdNcVsq
image 2
https://ibb.co/5xqSzsv
image 3
https://ibb.co/xDnvTzy
Now once device is booted it will take more than 5 minutes to load so all you need to do is to force your device to boot into Recovery mode, to do that once device is stucked on boot logo just HOLD together Power button and Vol + button and just hold like that and your device will reboot and don't release buttons until you see you are in recovery mode.
You will facing errors like
E: failed to load cache ... it will be fixed after factory reset
E: failed to load rknand ... it will be fixed after factory reset
E: failed to mount /mt/sd ... it means that device can't mount micro sd card because is not existed
Ignore those and just simple with Vol- go to Wipe Cache partition and confirm with one time pressedPower button .
Now once is completed go to Wipe data /Factory reset and confirm with Power button . Once is once is completed go to Reboot system now and confirm with one time pressed Power button .
See Pictures:
image 1
https://ibb.co/MZqm1KJ
image 2
Without sd card
https://ibb.co/D1Hq9rD
image 3
With sd card inside it
https://ibb.co/g4Swmgn
FINAL RESULT
image 1
https://ibb.co/jgkS19C
image 2
https://ibb.co/pn6b0zx
To make it work properly update Google play services and also apps like YouTube, Google, etc...
Device is slow with 512MB of RAM so don't expect to be so fast like devices with 2GB or more ....
FLASH TOOL CAN'T DETECT YOUR DEVICE
Solution:
Short 7-8-9 pin from nandchip with tweezers or some wire carefullyor and plug the usb cable while you shorted those pins from nandchip.
See picture:
image
https://ibb.co/bP4WYWC
Device it will be detected inside flashtool like Found One MASKROM Device and flash as in the instructions above and it should be fine.
That's it :highfive:
Good luck
Teddy Lo said:
Hello everyone, today I will show you my way how to unbrick hard-bricked Selecline MW7526L - 871023 S4T7IN with mainboard [BND-RK3126-K86-YH A2.4] for free by without InfinityBox CM2RKT v2.01 or others...
The way I figured out on my own without box cost me 2 days of trying searching online and I was very disappointed because there is almost no support for devices like this, and if you find something you can't download without membership, so I pass hard way to figured out the right way to make a live this device again, but I decided to make it very easy for you guys with all already prepared files to save your time .
BEFORE WE START - open your device and check if your mainboard is with code [BND-RK3126-K86-YH A2.4] if not don't try it.
See Pictures:
image 1
https://ibb.co/hcn1R21
Image 2
https://ibb.co/184WBmg
So let's Start
1. Download and extract files to your Desktop drivers and firmware:
https://gofile.io/d/voSbd9
password is: SV Tech
2. Install drivers
Now once you extracted files open Selecline MW7526L - 871023 S4T7IN folder, and inside you will find Rockchip_DriverAssitant_v4.4 folder and Flash tool and files, so first open Rockchip_DriverAssitant_v4.4 folder and run DriverInstall.exe in order to install driver.
There’s no need to connect your Rockchip device during this procedure, a very important thing is if you've previously tried to install the Rockchip USB drivers for any Rockchip devices make sure you click “Uninstall Driver” first and then Re-open DriverInstall.exe and click on “Install Driver”.
See steps in pictures:
image 1
https://ibb.co/wYd6SSJ
image 2
https://ibb.co/ypd9B36
image 3
Click on "Run"
https://ibb.co/qpZXTPg
image 4
Click on "Install Driver"
https://ibb.co/0KsxRTW
Image 5
Click “Install Driver”, and depending on your version of Windows the Security below may show up twice during installation. Just click “Install”.
https://ibb.co/FKQTBm3
Image 6
Once driver is installed click "Okay" and Exit from RK Driver Assistant v4.4
https://ibb.co/2v74MyH
3. Now from extracted extracted files open Selecline MW7526L - 871023 S4T7IN folder, and inside you will find "Flash tool and files" , so open it and run "AndroidTool.exe" and load all prepared files from Selecline MW7526L - 871023 S4T7IN folder where you extracted files. In my case I extracted to the Desktop so my location is C:\Users\Maksim\Desktop\Selecline MW7526L - 871023 S4T7IN\Flash tool and files\image .And load each one and make sure to check all boxes exept userdata.
See steps in pictures:
image 1
https://ibb.co/Yhy3wc8
Image 2
https://ibb.co/F6fhHMK
Image 3
Check all except the userdata and load parameter file from Selecline MW7526L - 871023 S4T7IN\Flash tool and files folder each img files one by one except the user data and Radial update from Selecline MW7526L - 871023 S4T7IN\Flash tool and files\image folder.
https://ibb.co/Pzq87sw
4. Now press together Vol + / Vol- and plug usb cable and press also Power button for few seconds for device to be detected like Loader inside tool.
Then once is detected press on "Lower Format" and wait to be done. Then again do the same step and now press "Run"and wait for progress to complete full and your device will boot ....
image 1
https://ibb.co/QdNcVsq
image 2
https://ibb.co/5xqSzsv
image 3
https://ibb.co/xDnvTzy
Now once device is booted it will take more than 5 minutes to load so all you need to do is to force your device to boot into Recovery mode, to do that once device is stucked on boot logo just HOLD together Power button and Vol + button and just hold like that and your device will reboot and don't release buttons until you see you are in recovery mode.
You will facing errors like
E: failed to load cache ... it will be fixed after factory reset
E: failed to load rknand ... it will be fixed after factory reset
E: failed to mount /mt/sd ... it means that device can't mount micro sd card because is not existed
Ignore those and just simple with Vol- go to Wipe Cache partition and confirm with one time pressedPower button .
Now once is completed go to Wipe data /Factory reset and confirm with Power button . Once is once is completed go to Reboot system now and confirm with one time pressed Power button .
See Pictures:
image 1
https://ibb.co/MZqm1KJ
image 2
Without sd card
https://ibb.co/D1Hq9rD
image 3
With sd card inside it
https://ibb.co/g4Swmgn
FINAL RESULT
image 1
https://ibb.co/jgkS19C
image 2
https://ibb.co/pn6b0zx
To make it work properly update Google play services and also apps like YouTube, Google, etc...
Device is slow with 512MB of RAM so don't expect to be so fast like devices with 2GB or more ....
FLASH TOOL CAN'T DETECT YOUR DEVICE
Solution:
Short 7-8-9 pin from nandchip with tweezers or some wire carefullyor and plug the usb cable while you shorted those pins from nandchip.
See picture:
image
https://ibb.co/bP4WYWC
Device it will be detected inside flashtool like Found One MASKROM Device and flash as in the instructions above and it should be fine.
That's it :highfive:
Good luck
Click to expand...
Click to collapse
Hello Teddy Lo Good work Too bad the link https://gofile.io/d/voSbd9 no longer works I have to do a friend a favor and I'll try your hand Thanks in advance
forrhum said:
Hello Teddy Lo Good work Too bad the link https://gofile.io/d/voSbd9 no longer works I have to do a friend a favor and I'll try your hand Thanks in advance
Click to expand...
Click to collapse
Link updated
thanks bro for this greeat work but i dont found the loader
can u upload it
as you did like the pic the cache and metadata and kpanic misses too
Teddy Lo said:
Hello everyone, today I will show you my way how to unbrick hard-bricked Selecline MW7526L - 871023 S4T7IN with mainboard [BND-RK3126-K86-YH A2.4] for free by without InfinityBox CM2RKT v2.01 or others...
The way I figured out on my own without box cost me 2 days of trying searching online and I was very disappointed because there is almost no support for devices like this, and if you find something you can't download without membership, so I pass hard way to figured out the right way to make a live this device again, but I decided to make it very easy for you guys with all already prepared files to save your time .
BEFORE WE START - open your device and check if your mainboard is with code [BND-RK3126-K86-YH A2.4] if not don't try it.
See Pictures:
image 1
https://ibb.co/hcn1R21
Image 2
https://ibb.co/184WBmg
So let's Start
1. Download and extract files to your Desktop drivers , flash tool and firmware:
Edit:
Links updated
#Firmware:
Auchan SELECLINE RK312X v5.1.1 Firmware.zip
drive.google.com
#Driver Assistant
Rockchip DriverAssitant_v4.4
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
#Flash tool
AndroidTool_Release_v2.35.rar | by heatshiver for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
1.1 Install drivers
Now once you extracted file inside you will find Rockchip_DriverAssitant_v4.4 folder, open it and Run DriverInstall.exe in order to install driver.
There’s no need to connect your Rockchip device during this procedure, a very important thing is if you've previously tried to install the Rockchip USB drivers for any Rockchip devices make sure you click “Uninstall Driver” first and then Re-open DriverInstall.exe and click on “Install Driver”.
See steps in pictures:
image 1
https://ibb.co/wYd6SSJ
image 2
https://ibb.co/ypd9B36
image 3
Click on "Run"
https://ibb.co/qpZXTPg
image 4
Click on "Install Driver"
https://ibb.co/0KsxRTW
Image 5
Click “Install Driver”, and depending on your version of Windows the Security below may show up twice during installation. Just click “Install”.
https://ibb.co/FKQTBm3
Image 6
Once driver is installed click "Okay" and Exit from RK Driver Assistant v4.4
https://ibb.co/2v74MyH
1. 2 Now extract downloaded firmware to Desktop or wherever you want.
For me is easy to create one new folder on Desktop with name MW7526L - 871023 S4T7IN
But you can do how is easy for you ...
1.3 Now extract downloaded flash tool and run "AndroidTool.exe" and load all prepared files from Selecline MW7526L - 871023 S4T7IN folder where you extracted files. In my case I extracted to the Desktop so my location is C:\Users\Maksim\Desktop\Selecline MW7526L - 871023 S4T7IN\Flash tool and files\image .And load each one and make sure to check all boxes exept userdata.
See steps in pictures:
image 1
https://ibb.co/Yhy3wc8
Image 2
https://ibb.co/F6fhHMK
Image 3
Check all except the userdata and load parameter file from extracted firmware in my case Selecline MW7526L - 871023 S4T7IN\Flash tool and files folder each img files one by one except the user data and Radial update from Selecline MW7526L - 871023 S4T7IN\Flash tool and files\image folder.
https://ibb.co/Pzq87sw
4. Now press together Vol + / Vol- and plug usb cable and press also Power button for few seconds for device to be detected like Loader inside tool.
Then once is detected press on "Lower Format" and wait to be done. Then again do the same step and now press "Run"and wait for progress to complete full and your device will boot ....
image 1
https://ibb.co/QdNcVsq
image 2
https://ibb.co/5xqSzsv
image 3
https://ibb.co/xDnvTzy
Now once device is booted it will take more than 5 minutes to load so all you need to do is to force your device to boot into Recovery mode, to do that once device is stucked on boot logo just HOLD together Power button and Vol + button and just hold like that and your device will reboot and don't release buttons until you see you are in recovery mode.
You will facing errors like
E: failed to load cache ... it will be fixed after factory reset
E: failed to load rknand ... it will be fixed after factory reset
E: failed to mount /mt/sd ... it means that device can't mount micro sd card because is not existed
Ignore those and just simple with Vol- go to Wipe Cache partition and confirm with one time pressedPower button .
Now once is completed go to Wipe data /Factory reset and confirm with Power button . Once is once is completed go to Reboot system now and confirm with one time pressed Power button .
See Pictures:
image 1
https://ibb.co/MZqm1KJ
image 2
Without sd card
https://ibb.co/D1Hq9rD
image 3
With sd card inside it
https://ibb.co/g4Swmgn
FINAL RESULT
image 1
https://ibb.co/jgkS19C
image 2
https://ibb.co/pn6b0zx
To make it work properly update Google play services and also apps like YouTube, Google, etc...
Device is slow with 512MB of RAM so don't expect to be so fast like devices with 2GB or more ....
FLASH TOOL CAN'T DETECT YOUR DEVICE
Solution:
Short 7-8-9 pin from nandchip with tweezers or some wire carefullyor and plug the usb cable while you shorted those pins from nandchip.
See picture:
image
https://ibb.co/bP4WYWC
Device it will be detected inside flashtool like Found One MASKROM Device and flash as in the instructions above and it should be fine.
That's it :highfive:
Good luck
Click to expand...
Click to collapse
i'm stuck in failed to load image
Hi, I need more pictures or video guide, because I don't understand how can I use AndroidTool. My tablet brick yesterday and I want to get it repaired asap