So we have official 9.0 update now, which means we have pie vendor installed our devices.
However, it seems non of GSI pie roms work on xz1 even though our vendor and kernel are working properly with pie firmware.
Is there anyone successfully installed 9.0 GSI rom after the official Pie update? Or is there any idea why they don't work?
Riskypedia said:
So we have official 9.0 update now, which means we have pie vendor installed our devices.
However, it seems non of GSI pie roms work on xz1 even though our vendor and kernel are working properly with pie firmware.
Is there anyone successfully installed 9.0 GSI rom after the official Pie update? Or is there any idea why they don't work?
Click to expand...
Click to collapse
everything is working fine on GSI 9.0 pie roms but if u need gcam, flash on aosp boot and vendor(because full camera2api and raw support), on stock blobs gcam doesnt work because there is no raw support on stock.
arslancn said:
everything is working fine on GSI 9.0 pie roms but if u need gcam, flash on aosp boot and vendor(because full camera2api and raw support), on stock blobs gcam doesnt work because there is no raw support on stock.
Click to expand...
Click to collapse
Thanks for your reply Can you suggest some roms that worked? Because whenever I try to boot my phone with this rom(https://forum.xda-developers.com/pr...opment-a-only-roms/ported-p-sgsi-pr2-t3845789), I get bootlooped
Riskypedia said:
Thanks for your reply Can you suggest some roms that worked? Because whenever I try to boot my phone with this rom(https://forum.xda-developers.com/pr...opment-a-only-roms/ported-p-sgsi-pr2-t3845789), I get bootlooped
Click to expand...
Click to collapse
try any updated ''GSI''(not sGSI) arm64 a only rom from here. sGSI roms have alot of bugs
arslancn said:
try any updated ''GSI''(not sGSI) arm64 a only rom from here. sGSI roms have alot of bugs
Click to expand...
Click to collapse
Thanks to your support, I've got finally found a working rom(Pixel Experienced Rom)! Maybe I think the roms I've tried are all sGSI roms that caused bootloops
Now I'm trying to use gcam now, so I've installed pie aosp vendor uploaded in sony open device project(fasboot flash oem ~~~.img). However, it seems it doesn't have problem with booting but gcam still crashes(I think it's cam2api problem). According to your previous comment, it seems I should flash aosp kernel which isn't provided by Sony. So should I manually compile the kernel to make it working?
Sorry for bothering :crying:
Riskypedia said:
Thanks to your support, I've got finally found a working rom(Pixel Experienced Rom)! Maybe I think the roms I've tried are all sGSI roms that caused bootloops
Now I'm trying to use gcam now, so I've installed pie aosp vendor uploaded in sony open device project(fasboot flash oem ~~~.img). However, it seems it doesn't have problem with booting but gcam still crashes(I think it's cam2api problem). According to your previous comment, it seems I should flash aosp kernel which isn't provided by Sony. So should I manually compile the kernel to make it working?
Sorry for bothering :crying:
Click to expand...
Click to collapse
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
arslancn said:
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
Click to expand...
Click to collapse
which version of gcam works?
arslancn said:
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
Click to expand...
Click to collapse
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Riskypedia said:
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Click to expand...
Click to collapse
:highfive: u can make a thread about flashing treble with full cameraapi 2 support and share your images with other XZ1 users!
Riskypedia said:
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Click to expand...
Click to collapse
did you have same bug on XZ1?
the battery level always in 20%.
arslancn said:
:highfive: u can make a thread about flashing treble with full cameraapi 2 support and share your images with other XZ1 users!
Click to expand...
Click to collapse
Sadly, it seems it's impossible to use AOSP based system because of its stability. It's way too unstable to use, but I think I can share the built images to make progress! Again, thanks for your help
gacky1601 said:
did you have same bug on XZ1?
the battery level always in 20%.
Click to expand...
Click to collapse
I've never experienced the bug when I used that. Did that happen to your XZ1? Or is it the problem of the other Xperia devices? The biggest problem was that it's too unstable that I can barely use that. The network oftenly disconnects and randomly reboots itself.
Riskypedia said:
I've never experienced the bug when I used that. Did that happen to your XZ1? Or is it the problem of the other Xperia devices? The biggest problem was that it's too unstable that I can barely use that. The network oftenly disconnects and randomly reboots itself.
Click to expand...
Click to collapse
Yes,my device is G8342. The wifi bug and battery level bug.
my device couldn't connect to any wifi,but sharing hotspot in 2.4ghz/5ghz was fine.
Screen colors look strange.
Randomly reboot,too.
I don't know any solution.
I only knew the methods to the image step by step from Sony's source.
Maybe we should build the kernel by ourselves
The problem you mentioned about disconnecting network, does it happens on wifi or mobile data?
Sorry, just a quick question has as resurrection remix has a treble room out, has anyone tried it?
gacky1601 said:
Yes,my device is G8342. The wifi bug and battery level bug.
my device couldn't connect to any wifi,but sharing hotspot in 2.4ghz/5ghz was fine.
Screen colors look strange.
Randomly reboot,too.
I don't know any solution.
I only knew how to build the image step by step from Sony's source.
Maybe we should build the kernel by ourselves[/QUOTE
Yeah, we should... I'm just a newbie developer, and really sad that we're lack of developers who can help XZ1 users, but I believe one day users make this out together. The dispaly color is because of AOSP's default display color temperature, maybe we can fix this out by touch some configs of kernel
Click to expand...
Click to collapse
lilbrat said:
Sorry, just a quick question has as resurrection remix has a treble room out, has anyone tried it?
Click to expand...
Click to collapse
I think you can just try it with stock boot , vendor and oem.
I will works perfectly.
Don't forget to report if there is any problem or it work properly.
---------- Post added at 04:37 PM ---------- Previous post was at 04:20 PM ----------
[/QUOTE
Yeah, we should... I'm just a newbie developer, and really sad that we're lack of developers who can help XZ1 users, but I believe one day users make this out together. The dispaly color is because of AOSP's default display color temperature, maybe we can fix this out by touch some configs of kernel [/QUOTE]
Yeah. I think there are a few developers work on XZ1.
Have .
The working perfectly rom will be our target, like the thread below.
https://forum.xda-developers.com/xperia-xz1-compact/how-to/xz1c-g8441-lilac-aosp8-1-t3762581
Share your all files so that i can work with gcam to be installed properly to latest pixel experience.
Related
Orginal post:
https://www.google.pl/amp/s/forum.x...lopment/experimental-phh-treble-t3709659/amp/
Downolad Version V10:
With gapps and Su:
https://androidfilehost.com/?fid=746010030569954763
Without gapps and Su
https://androidfilehost.com/?fid=673956719939820512
Installation:
- First, you MUST be running a stock Android 8.0 ROM.
- Obviously, unlock your bootloader
- Download the correct system.img variant (see list of devices above, and dowload links below)
- Flash the system.img
- Do a Factory reset
- Reboot
What nor working?
- Broken camera because DRM KEY...
But all probably work pretty good!
For Xperia XZ1 and XZ1 COMPACT FLASH ONLY A version!!
Changeleog
v10: (2018-02/18)
- Android 8.1 !
- Includes versioned vndk, so devices running both 8.1 and 8.0 should work.
i heard google camera hdr+ working on android 8.1. is it working? What about battery efficiency?
Idk i not test this because my phone go to repair. I think camera not work on all apk. Because drm key broken but i don't know on 100%.
ok I will try it
eggimong said:
ok I will try it
Click to expand...
Click to collapse
Give screen plz. I will add on #1 post. And thank u!
i stuck on bootloop..
i flashed the file include su and gapps on 47.1.A.12.75. it stuck at sony boot logo then i flashed nosu and it stuck at boot animation
then i downgraded xz1 on 47.1.A.8.49 and flashed both but same result
i am not good at english :/
eggimong said:
i heard google camera hdr+ working on android 8.1. is it working? What about battery efficiency?
Click to expand...
Click to collapse
Maybe off topic but in Xperia XZ, Google camera hdr mod work fine without DRM keys in AOSP rom. I guess should work the same for XZ1
snake218 said:
Maybe off topic but in Xperia XZ, Google camera hdr mod work fine without DRM keys in AOSP rom. I guess should work the same for XZ1
Click to expand...
Click to collapse
you're right I installed aosp 8.1 (https://forum.xda-developers.com/xperia-xz1/how-to/aosp-8-1-t3750951)because project treble cause bootloop. it works hdr+!
eggimong said:
you're right i installed aosp 8.1 (https://forum.xda-developers.com/xperia-xz1/how-to/aosp-8-1-t3750951)because project treble cause bootloop. It works hdr+!
Click to expand...
Click to collapse
but their are limitation from sony like back cemra is set to 17 mp and iso set to 800 only they are in kernel i am working on it i am now learning kernel patching i have not done before lets hope for best
You can use TWRP brush into it？
V11 released
who can test that version?
I'll give it a shot
Download link?
N1ghtr08d said:
Download link?
Click to expand...
Click to collapse
Can be found in the original post from the treble forums.
Here is the post:
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Good luck, let us know.
Redcalibur said:
Can be found in the original post from the treble forums.
Here is the post:
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Good luck, let us know.
Click to expand...
Click to collapse
Complete waste of time. I tried several different ways to flash this ROM but it's just not compatible with the XZ1 8341. Now i have to flash back to stock and the restore my TWRP backup.
Incompatible ROMs should NOT be posted on these forums unless they have been tested at the very least by the OP.
N1ghtr08d said:
Complete waste of time. I tried several different ways to flash this ROM but it's just not compatible with the XZ1 8341. Now i have to flash back to stock and the restore my TWRP backup.
Incompatible ROMs should NOT be posted on these forums unless they have been tested at the very least by the OP.
Click to expand...
Click to collapse
Hey, I'm asking this just to be sure that we can consider the rom incompatible for our device.
You used the rom that said A-only, right? Since the thread states that the XZ1 only supports build A-only. If so, we could try mentioning the issues you experienced in the original thread.
Thank you for your time.
Edit: I've just seen your posts in the original thread. Sorry for the quote.
No it's ok, I don't mind helping, it's just frustrating. I flashed the A only nosu vanilla version, then booted into TWRP and performed a factory reset and when I rebooted into system the phone just hangs on the Sony boot screen for ages then reboots and does the same thing again and again.
I had the same experience with all A-only versions.
N1ghtr08d said:
No it's ok, I don't mind helping, it's just frustrating. I flashed the A only nosu vanilla version, then booted into TWRP and performed a factory reset and when I rebooted into system the phone just hangs on the Sony boot screen for ages then reboots and does the same thing again and again.
Click to expand...
Click to collapse
try this version, for me on xz1c it loads to the inscription of "xperia", and it hangs https://drive.google.com/open?id=118pwXm2UK95AaYTvIfDAiWDBk-rUBh6Q
Infinite restart animation………………cnm?
Lineage OS 16 For Xperia X [Treble]Based on Sony Open DevicesI am not responsible for bricked devices, dead SD cards,.Suitable for F5121 and F5122Reboot after your first boot please!
Opinional files:
Disable ForceEncrypt:Link
Required files:
[Tested]
V20190323:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v6_loire.zip
[OEM-Files]
Download Link
How to flash
Read README.txt in zip file please.
Optional step If you want to use a GSI
Flash a GSI compatible System image and boot!
Code:
fastboot flash system < Path of GSI-System.img >
Because of Anti-Rollback, If you want to Use GSI, You need to choose the same or newer one as the treble build date.
Update and known BUG:
V20190323:
Bugs:
1. Quick Charge is broken, you can use computer USB port charge.
2. Camera doesn't work on first boot, you need to reboot.
Source Codes
Sjll Script
Contributors
Sjll @infixremix
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Paypal
I am very happy to receive your donation.
Version Information
Status: Testing
Created 2019-03-31
Last Updated 2019-03-31
I've used your Treble Pie for a while and it's awesome. Gotta try this as well. Thanks a lot for all the work!
P/s: Can you make a custom overclocked kernel for your Pie ROMs? I've been using Extreme Kernels (for stock Oreo) and they are amazing. I wonder if Pie can also get a similar kernel.
Yeah bro thanks for this work..can you optimize kernel to make sodp rom usable
LOLisLIFE said:
I've used your Treble Pie for a while and it's awesome. Gotta try this as well. Thanks a lot for all the work!
P/s: Can you make a custom overclocked kernel for your Pie ROMs? I've been using Extreme Kernels (for stock Oreo) and they are amazing. I wonder if Pie can also get a similar kernel.
Click to expand...
Click to collapse
lookmanns14 said:
Yeah bro thanks for this work..can you optimize kernel to make sodp rom usable
Click to expand...
Click to collapse
I will try to build a optimize kernel in free time.
Hi,
Can you please help me with the download from the GSI? Where can I get the right file from?
after install, bluetooth and settings tell me that it stops all the time and sim cant be detected. Also there is some encryption so i can't access data or system anymore with twrp... even magisk can't be installed. great...
After running into a ton of errors, I think I've done something wrong. I have a few questions:
1. Where does Disable ForcedEncryption (DFE) go to in the installation process? If I flash the zip before Lineage (or not flasing at all), the phone encrypts itself right on boot. If I flash DFE zip after Lineage, the camera (and all the sensors) die permanently.
2. Regardless of the phone's encryption status, sometimes the phone just fails to recognize all the sensors (except Wifi, battery and GPS). That means no accelerometer, no screen rotation, no compass or light sensor. Rebooting fixes this on Lineage (for a while), but on RR once it occurs all sensors die permanently. Also GPS reception is terrible, as I haven't got a single fix.
Hope anyone who has been using Treble roms could give me an answer. Thanks in advance.
iH8Ecchi said:
After running into a ton of errors, I think I've done something wrong. I have a few questions:
1. Where does Disable ForcedEncryption (DFE) go to in the installation process? If I flash the zip before Lineage (or not flasing at all), the phone encrypts itself right on boot. If I flash DFE zip after Lineage, the camera (and all the sensors) die permanently.
2. Regardless of the phone's encryption status, sometimes the phone just fails to recognize all the sensors (except Wifi, battery and GPS). That means no accelerometer, no screen rotation, no compass or light sensor. Rebooting fixes this on Lineage (for a while), but on RR once it occurs all sensors die permanently. Also GPS reception is terrible, as I haven't got a single fix.
Hope anyone who has been using Treble roms could give me an answer. Thanks in advance.
Click to expand...
Click to collapse
Trust me....its weird (this is what i do with every pie Rom I DONT GUARANTEE SUCCESS ON TREBLE ROMS BECAUSE I WASNT ABLE TO TEST THEM YET)
Flash OEM image which is advertised here
Flash the Rom without anything
Reboot
Go back to recovery by Holding
Power + vol up
Screen turns black= quickly switch to
Power + vol down
Flash disable force encrypt
Reboot
Done!
(Remember to flash anything else that you want)
Some random said:
Trust me....its weird (this is what i do with every pie Rom I DONT GUARANTEE SUCCESS ON TREBLE ROMS BECAUSE I WASNT ABLE TO TEST THEM YET)
Flash OEM image which is advertised here
Flash the Rom without anything
Reboot
Go back to recovery by Holding
Power + vol up
Screen turns black= quickly switch to
Power + vol down
Flash disable force encrypt
Reboot
Done!
(Remember to flash anything else that you want)
Click to expand...
Click to collapse
I only run into these problems on Treble roms. No problem with sensors or encryption with native ones, such as AOSP or Paranoid.
iH8Ecchi said:
I only run into these problems on Treble roms. No problem with sensors or encryption with native ones, such as AOSP or Paranoid.
Click to expand...
Click to collapse
Hmmmmm
Well like that it worked with all pie ROMs that I used
I've been trying to flash this ROM but couldn't flash the Lineage OS Zip file. It says "Zip treble compatibility error!"
"Invalid zip file format!"
can someone please help me out?
Fardin Rehman said:
I've been trying to flash this ROM but couldn't flash the Lineage OS Zip file. It says "Zip treble compatibility error!"
"Invalid zip file format!"
can someone please help me out?
Click to expand...
Click to collapse
Use Twrp-Q (Ask Simeone for Link)
Some random said:
Use Twrp-Q (Ask Simeone for Link)
Click to expand...
Click to collapse
Yeah I have TWRP-Q just need to flash recovery and then try again. Thank you very much for helping
Can anyone please tell me which Gcam can i use on this ROM?
New version of LOS 16 + Treble
This version of LOS is outdated and does not work on latest Treble.
An updated LOS build (with Expanded volume and latest security patch) can be downloaded on this thread and installed over latest Treble.
Since this phone requires arm64 A-only GSIs to boot, the compatible version should be lineage-16.0-2019xxxx-UNOFFICIAL-treble_arm64_avN.img.xz.
Installation tutorial: Click here. Keep in mind that system.img refers to the LOS build above.
Getting Magisk to work: Click here.
iH8Ecchi said:
This version of LOS is outdated and does not work on latest Treble.
An updated LOS build (with Expanded volume and latest security patch) can be downloaded on this thread and installed over latest Treble.
Since this phone requires arm64 A-only GSIs to boot, the compatible version should be lineage-16.0-2019xxxx-UNOFFICIAL-treble_arm64_avN.img.xz.
Installation tutorial: Click here. Keep in mind that system.img refers to the LOS build above.
Getting Magisk to work: Click here.
Click to expand...
Click to collapse
Thanks man the ROM is great! But is it possible to make the camera work like it did on the original Xperia X stock ROM. I mean the camera is pretty dark on all custom ROMs is there any fix for that?
Fardin Rehman said:
Thanks man the ROM is great! But is it possible to make the camera work like it did on the original Xperia X stock ROM. I mean the camera is pretty dark on all custom ROMs is there any fix for that?
Click to expand...
Click to collapse
You can use Chippa_a's Unofficial LOS16 instead. That one has some heating issues and gaming performance might not be optimal (due to CPU throttling), but camera and battery life is almost identical to stock. In fact, I only use Treble LOS as daily driver because I play games on my phone quite a lot.
If you still insist on using Treble however, you can check out Google Camera ports (scroll down a little bit on Treble page). With HDR+ or Night Mode the picture quality is stellar, but taking pictures might be a bit slow. As far as I know it only runs on Treble and Omni.
iH8Ecchi said:
You can use Chippa_a's Unofficial LOS16 instead. That one has some heating issues and gaming performance might not be optimal (due to CPU throttling), but camera and battery life is almost identical to stock. In fact, I only use Treble LOS as daily driver because I play games on my phone quite a lot.
If you still insist on using Treble however, you can check out Google Camera ports (scroll down a little bit on Treble page). With HDR+ or Night Mode the picture quality is stellar, but taking pictures might be a bit slow. As far as I know it only runs on Treble and Omni.
Click to expand...
Click to collapse
Yeah I am using the gcam port and I get pretty good pictures with it but not very good video quality so I guess I'm gonna give it a try to Chippa_a's Unofficial LOS16.
Xperia XZ1 G8341 Vanilla AOSP ROM
This is my first ROM and its fully Vanilla. I Just followed this Build guide without any modifications whatsoever.
The future goal is to build a stable Rom with mostly FOSS Software, stability and useful tools/settings.
Bugs/missing functions i discovered so far:
- Camera Not working always and -> Lens Distortion. Although RAW should be possible.
- Sony Bootlogo has some Artifacts
- No automatic APN setting
- No NFC 25.05 working
- No 90/120Hz mode (or does it?)
- No Display Colour Calibration
- Low Singlethread Geekbench Score (836) and (6060 Multicore) [Governors and schedulers not optimized]
Fingerprint Sensor is working and it takes some time to find Network (not sure if bug or normal).
I hope to find usable answers to those problems + ideas and hope, to receive enough feedback to improve as much as possible.
Just Flash all files (boot, recovery [or any working TWRP], system,vendor, userdata and the OEM Binaries [
SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_yoshino.img] and you should be good to go.
XZ1 Single Sim(25.05.19)
XZ1 Dual Sim
SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_yoshino.img
120Hz Mode
Obviously I am not responsible for bricked devices or anything that this could be related to.
XDA:DevDB Information
RumiRom, ROM for the Sony Xperia XZ1
Contributors
celeron1
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: Stock AOSP Userdebug
Version Information
Status: Testing
Created 2019-05-25
Last Updated 2019-05-30
Don't use V8 binaries, V9 are out
https://developer.sony.com/file/dow...-for-aosp-pie-android-9-0-kernel-4-9-yoshino/
Worse perfomance is expected because of lack of qti perf framework
marios199546 said:
Don't use V8 binaries, V9 are out
https://developer.sony.com/file/dow...-for-aosp-pie-android-9-0-kernel-4-9-yoshino/
Worse perfomance is expected because of lack of qti perf framework
Click to expand...
Click to collapse
Neat!
Im gonna try these. Thanks a lot.
I would marry if you turn 60fps to 90-120-144 omg plz plz
ΒΕΓΑ said:
I would marry if you turn 60fps to 90-120-144 omg plz plz
Click to expand...
Click to collapse
There is little to nothing about this I could find for the xz1 except one oreo based rom. I have to compile the kernel for it and find out if 60+ hz is really working and how to succesfully implement a toggle option for it. Since im new at this it might take some time without help but its something I want to impliment.
The Xz1s Display obviously is really underperforming in non Sony roms without the "Bravia engine" (colour apperence) imo compared to other open roms. I tried the Bravia magisk module but could not see any difference (also did not checked what it should do at system level).
So if someone has more knowledge feel free to share
I compiled a Kernel from here and modified:
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-base-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar.dtsi
(changed 60hz to 90/120hz).
How can I check if the Panel really is working under those frequencies and if other steps are needed?
When compiling I got an Error with drivers/staging/wlan-qc/qcacld-3.0 -> so i removed them from drivers/staging/Kconfig (So apparently no Wifi).
These are the Kernels (boot):
90Hz
*Update 29.05. I Fixed Wifi for the 120Hz version. link in first post
Camera seems to work without problems (also Raw) so I guess there is something wrong with the precompiled Sony Kernel.
Also the Sony bootlogo is not present (no artifakts??)
And again. Flash at own risk.
What about the version for two SIM cards?
Model G8342.
Your rom works perfect on my phone, thanks dev.
Btw, doesn't it support Treble? I cannot boot any of the GSI roms on the forum...
Riskypedia said:
Your rom works perfect on my phone, thanks dev.
Btw, doesn't it support Treble? I cannot boot any of the GSI roms on the forum...
Click to expand...
Click to collapse
It should support Treble.
Maybe you also need to flash "Disable DM Verity" and "Magisk" after
Can be used on G8342 ? ?
Sent from my Sony Xperia XZ1 using XDA Labs
celeron1 said:
I compiled a Kernel from here and modified:
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-base-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar.dtsi
(changed 60hz to 90/120hz).
How can I check if the Panel really is working under those frequencies and if other steps are needed?
When compiling I got an Error with drivers/staging/wlan-qc/qcacld-3.0 -> so i removed them from drivers/staging/Kconfig (So apparently no Wifi).
These are the Kernels (boot):
90Hz
120Hz
Camera seems to work without problems (also Raw) so I guess there is something wrong with the precompiled Sony Kernel.
Also the Sony bootlogo is not present (no artifakts??)
And again. Flash at own risk.
Click to expand...
Click to collapse
Can i use this kernel with stock sony rom? (Existenz patched btw...)
ΒΕΓΑ said:
Can i use this kernel with stock sony rom? (Existenz patched btw...)
Click to expand...
Click to collapse
The Kernel is for AOSP (Linux kernel 4.9) so normally it shouldnt work with the Stock Firmware but i dont know if it works with the patched Existenz rom.
therma.cpp said:
What about the version for two SIM cards?
Model G8342.
Click to expand...
Click to collapse
Its for the single Sim.
Im not satisfied with the current State but I can build a dual sim version as well. (Building on hdd due to small SSD so it might take a while)
Screen is not responsive (SOV36). Any suggestions?
update: not the rom. tried to flash different rom and same result.
sinkoo1979 said:
Screen is not responsive (SOV36). Any suggestions?
update: not the rom. tried to flash different rom and same result.
Click to expand...
Click to collapse
Does it respond different while charging?
Is the screen properly clean?
Try flashing the last stock rom > same result?
If not try flashing any gsi > result?
Then full cfw flash + sw binary.
And do factory resets before flashing.
Hoping for the best. Not sure how and if the SOV36 model differs from the rest
celeron1 said:
Does it respond different while charging?
Is the screen properly clean?
Try flashing the last stock rom > same result?
If not try flashing any gsi > result?
Then full cfw flash + sw binary.
And do factory resets before flashing.
Hoping for the best. Not sure how and if the SOV36 model differs from the rest
Click to expand...
Click to collapse
no
yes
no
did not work
works with stock
sinkoo1979 said:
no
yes
no
did not work
works with stock
Click to expand...
Click to collapse
Dis you try one of these GSIs and did you flash the SW-Binaries after?
How "non responsive" is it? Laggy/Not at all/Ghost touches etc.?
Since this is off-Topic i will delete this message after you read it. You shuld open a new Thread where the Problem could be discussed.:good:
celeron1 said:
Dis you try one of these GSIs and did you flash the SW-Binaries after?
How "non responsive" is it? Laggy/Not at all/Ghost touches etc.?
Since this is off-Topic i will delete this message after you read it. You shuld open a new Thread where the Problem could be discussed.:good:
Click to expand...
Click to collapse
Nothing at all
sinkoo1979 said:
Nothing at all
Click to expand...
Click to collapse
Try flashing a oreo based stock rom.(or if you only tried oreo then pie), then flash gsi etc
ΒΕΓΑ said:
I would marry if you turn 60fps to 90-120-144 omg plz plz
Click to expand...
Click to collapse
don't you think it would be the least manner to put some pics of your ass when you come around with "marrying-for-asking"? XD :silly::silly:
Hi everyone, I've been trying to find a custom rom for Xiaomi Mi 12X, but none found so far. I tried to port Pixel Experience rom using the Xiaomi Mi 11X (alioth) device tree and changed accordingly, since the SOC and almost all specs are the same except Camera. Can anybody shed some light in how to correctly port the ROM for my devices without official device tree from LineageOS or Pixel Experience? Thank you.
Anybody has any suggestions?
JChanMe said:
Anybody has any suggestions?
Click to expand...
Click to collapse
Hi, right now I'm using crdroid gsi, which works pretty good. Except of fp, everything works as it should. It's smooth, has a good bb and even MGC's Gcam 8.1, last stable, works incl. portrait, nightmode and with all lenses (ok, no pixelbinning). Installing is pretty simple: use fastbootd and just fash img to system. That's it....
Voodoojonny said:
Hi, right now I'm using crdroid gsi, which works pretty good. Except of fp, everything works as it should. It's smooth, has a good bb and even MGC's Gcam 8.1, last stable, works incl. portrait, nightmode and with all lenses (ok, no pixelbinning). Installing is pretty simple: use fastbootd and just fash img to system. That's it....
Click to expand...
Click to collapse
Thank you but I don't see it on crdrood website, did you build it yourself?
JChanMe said:
Thank you but I don't see it on crdrood website, did you build it yourself?
Click to expand...
Click to collapse
It's a gsi treble rom (that works with many vendors)... Just search for project treble on xda!
Voodoojonny said:
It's a gsi treble rom (that works with many vendors)... Just search for project treble on xda!
Click to expand...
Click to collapse
Thank you. I figured it out and tried a few treble roms including pixel experience, there are a few problems including auto brightness, fingerprint and vibrator. You had the same problems?
JChanMe said:
Thank you. I figured it out and tried a few treble roms including pixel experience, there are a few problems including auto brightness, fingerprint and vibrator. You had the same problems?
Click to expand...
Click to collapse
Yes, especially the sound makes problems... When usung videocall, it's awfully distorted. I'm using stock for now. With Lawnchair and some modifications it's ok for now.
Do you know, why there's no thread for our phone here?
Just seen, you are forking some repositories... Have you been successful in building?
Voodoojonny said:
Just seen, you are forking some repositories... Have you been successful in building?
Click to expand...
Click to collapse
I successfully build the ROM without errors, just some warnings, but it didn't boot aftter flashing it.
JChanMe said:
I successfully build the ROM without errors, just some warnings, but it didn't boot aftter flashing it.
Click to expand...
Click to collapse
Did you flash with vendor or system only?
Voodoojonny said:
Did you flash with vendor or system only?
Click to expand...
Click to collapse
No, I used the same procedure as described for Alioth device, fastboot flash boot boot.img, then from recovery use adb push to update the zip ROM file.
JChanMe said:
No, I used the same procedure as described for Alioth device, fastboot flash boot boot.img, then from recovery use adb push to update the zip ROM file.
Click to expand...
Click to collapse
But how did you built the rom. Did you get out a flashing zip directly? Normally, you create different partitions as fas as I know... Would you share your rom? Btw. which one did you build?
Voodoojonny said:
But how did you built the rom. Did you get out a flashing zip directly? Normally, you create different partitions as fas as I know... Would you share your rom? Btw. which one did you build?
Click to expand...
Click to collapse
Yes, after building I got a zip and flashing it using update by adb push. I built Pixel Experience Android 11
JChanMe said:
Yes, after building I got a zip and flashing it using update by adb push. I built Pixel Experience Android 11
Click to expand...
Click to collapse
But you used the lineage device tree. And PE is aosp not lineage. Might that be the problem? Would you try to build crdroid? Or instruct me how to setup a build environment?
No, I used the PE device tree, not Lineage. I used the build instructions provided by Pixel Experience for Alioth.
JChanMe said:
Anybody has any suggestions?
Click to expand...
Click to collapse
Yesterday xiaomi released kernel for 12x on GitHub. So I think now you can build pe/los without troubles
Maxletsplay_1 said:
Yesterday xiaomi released kernel for 12x on GitHub. So I think now you can build pe/los without troubles
Click to expand...
Click to collapse
Didn't they release the kernel when the phone was released?
JChanMe said:
Didn't they release the kernel when the phone was released?
Click to expand...
Click to collapse
Technically yes, but i've checked GitHub(about month ago) and I didn't saw kernel for this phone, just an empty folder
JChanMe said:
Didn't they release the kernel when the phone was released?
Click to expand...
Click to collapse
Did you replaced vendor libs with libs from 12x and other stuff like fstab, bins, rc files..configs? Attach logs from boot if you decide to build again. My advice is to build as eng and disable encryption, put selinux to minimal mode, nuke livedisplay, import vendor modules if you build with stock prebuilt kernel. Always look for F Linker errors in log and resolve them.
I'm waiting for AOSP rom too.
Hi, i want to try android 14/pixel exp on s23 ultra as i have it on s22U but it seems to be impossible to install. Neither installs throught fastbootd neither from twrp how can i do it? Thanks
Start from here?
How to Download and Install Android 14 GSI ROM
Google has started the Android 14 development journey, and users can enjoy several valuable features, including the ability to grant permissions to individual
rootmygalaxy.net
Hi, @inthedthank you for your reply, it says that vbmeta partition is not accesible through adb when i try to flash it (failed) any workaround with that?
Hi I am kind of noobish to GSIs but I got the google built android 13 GSI working on my s23 last night, couldn't get pixel experience to boot. CrDroid would boot but I was getting a lot of random trips to the bootscreen during set-up.
Haven't tried android 14 yet, but the procedure was pretty simple for android 13 GSI. I had already unlocked bootloader/rooted my s23 before attempting this, which included flashing vbmeta_disabled
Downloaded official google android 13 GSI
Install TWRP with Odin
Reboot to recovery and wiped data
Reboot then into fastboot inside of TWRP
flashing gsi using fastboot: fastboot flash system system image
restarted went through set-up and downloaded Magisk and Pixelfy magisk mod and I am pretty content
If anyone knows how to get another GSI like Pixel Experience or CrDroid to work reliably I am super interested
Therazorsedge said:
Hi, @inthedthank you for your reply, it says that vbmeta partition is not accesible through adb when i try to flash it (failed) any workaround with that?
Click to expand...
Click to collapse
Haven't tried on s23 series yet.
Cannot Flash vbmeta.img in Android: How to Fix
In this comprehensive tutorial, we will show you various methods to fix the issue of being unable to flash the vbmeta.img file on Android.
www.droidwin.com
Hey, have you solved your problem
Anyone?
Cfly said:
Hi I am kind of noobish to GSIs but I got the google built android 13 GSI working on my s23 last night, couldn't get pixel experience to boot. CrDroid would boot but I was getting a lot of random trips to the bootscreen during set-up.
Haven't tried android 14 yet, but the procedure was pretty simple for android 13 GSI. I had already unlocked bootloader/rooted my s23 before attempting this, which included flashing vbmeta_disabled
Downloaded official google android 13 GSI
Install TWRP with Odin
Reboot to recovery and wiped data
Reboot then into fastboot inside of TWRP
flashing gsi using fastboot: fastboot flash system system image
restarted went through set-up and downloaded Magisk and Pixelfy magisk mod and I am pretty content
If anyone knows how to get another GSI like Pixel Experience or CrDroid to work reliably I am super interested
Click to expand...
Click to collapse
Hi, what version of A13 you tried? try to install the PEX rom and after that install original recovery, it should boot well, let me know
Cfly said:
Hi I am kind of noobish to GSIs but I got the google built android 13 GSI working on my s23 last night, couldn't get pixel experience to boot. CrDroid would boot but I was getting a lot of random trips to the bootscreen during set-up.
Haven't tried android 14 yet, but the procedure was pretty simple for android 13 GSI. I had already unlocked bootloader/rooted my s23 before attempting this, which included flashing vbmeta_disabled
Downloaded official google android 13 GSI
Install TWRP with Odin
Reboot to recovery and wiped data
Reboot then into fastboot inside of TWRP
flashing gsi using fastboot: fastboot flash system system image
restarted went through set-up and downloaded Magisk and Pixelfy magisk mod and I am pretty content
If anyone knows how to get another GSI like Pixel Experience or CrDroid to work reliably I am super interested
Click to expand...
Click to collapse
Wow that is awesome dude!! How is it going? Bugs you have found? Fingerprint?
Cfly said:
Hi I am kind of noobish to GSIs but I got the google built android 13 GSI working on my s23 last night, couldn't get pixel experience to boot. CrDroid would boot but I was getting a lot of random trips to the bootscreen during set-up.
Haven't tried android 14 yet, but the procedure was pretty simple for android 13 GSI. I had already unlocked bootloader/rooted my s23 before attempting this, which included flashing vbmeta_disabled
Downloaded official google android 13 GSI
Install TWRP with Odin
Reboot to recovery and wiped data
Reboot then into fastboot inside of TWRP
flashing gsi using fastboot: fastboot flash system system image
restarted went through set-up and downloaded Magisk and Pixelfy magisk mod and I am pretty content
If anyone knows how to get another GSI like Pixel Experience or CrDroid to work reliably I am super interested
Click to expand...
Click to collapse
How is it? Smooth? Any problem? Battery wise? Everything ))
Keller0088 said:
Wow that is awesome dude!! How is it going? Bugs you have found? Fingerprint?
Click to expand...
Click to collapse
Flammer99 said:
How is it? Smooth? Any problem? Battery wise? Everything ))
Click to expand...
Click to collapse
Hi guys, sorry for the delay. The stock 13 GSI was pretty good albeit not perfect. Smoothness was very nice after force enabling 120hz through adb (battery life is notably worse, as you would expect).
Feels just about as smooth as stock, which is pretty good IMO.
This was the stock google build, so no fingerprint or face unlock. I would imagine custom GSIs would fix some of this.
However I eventually returned to stock since I post videos on social media apps a lot, and the generic camera API on the GSI made it pretty bad to look at.
Fun to try out, just wasn't ready for my needs yet.
I also did try to flash the original recovery for PEX like the user above me mentioned, still no dice. I have been out of the Android scene for a few years prior to this so it is probably something I am doing.
Hope this helps, thanks!
use dsu sideloader
I rly Hope for a fully working GSI ROM on S23 Ultra
Hunter9037 said:
I rly Hope for a fully working GSI ROM on S23 Ultra
Click to expand...
Click to collapse
Fully working GSI ROM? lmao
Forget such thing, especially on newer devices and especially on Samsung.
Hunter9037 said:
I rly Hope for a fully working GSI ROM on S23 Ultra
Click to expand...
Click to collapse
I have tested a few of them. Only bugs are fingerprint scanner, Always on display and VoLTE. It can be used as a daily driver if you can live with these bugs. For me it's fine.
which GSI are you using? And which GCAM is working?
bhammler said:
which GSI are you using? And which GCAM is working?
Click to expand...
Click to collapse
@mohammed510
he's using trebledroid's LOS 20 I assume. I'll try it out as well one of these days, and iirc the amazing dev behind it takes requests for adding support to fp scanners, I'll ask him about it
JakoDel said:
@mohammed510
he's using trebledroid's LOS 20 I assume
Click to expand...
Click to collapse
The "Light" version by Andy Yan is the best one for S23U. There's a camera app already included. As for gcam, the one by "Shamim" works but only ultra wide lens. Better use the one included as it has switching between lenses all working.
Bugs are:
AOD
Fingerprint scanner
VoLTE
I think the first 2 can be fixed with Overlays that are flashed using Magisk. It's possible to have a almost 99% working GSI on S23U
You can make phone calls but it will be over 3G networks (not that bad really) and not through 4G as VoLTE still doesn't work
You can easily pass safety net with universal safetynet fix "MOD version" and Google Wallet also works after passing Safetynet
mohammed510 said:
The "Light" version by Andy Yan is the best one for S23U. There's a camera app already included. As for gcam, the one by "Shamim" works but only ultra wide lens. Better use the one included as it has switching between lenses all working
Click to expand...
Click to collapse
thanks a lot! and may I ask how is the battery life compared to oneUI?
edit: didn't see your new edit, I guess I'll try to follow the guide for making an overlay on github, many thanks.
JakoDel said:
thanks a lot! and may I ask how is the battery life compared to oneUI?
Click to expand...
Click to collapse
Battery life is better and phone runs noticeably cooler. Uses much less RAM also