Related
I found a very nice & Slim universal charger on Kensington's site for Notebook, PSP, Ipod (yes I have all this stuff in my backpack...), but a tip for hermes seems to be missing.
Does anybody now a similr device with Hermes tip too?
TX
Basically anything with a mini-USB plug will work.
That's not been my experience. If it connects something to the data pins it will work, if not, it won't charge correctly.
I used my old Motorola V3 wall charger to charge mine for a while, worked fine - thats a standard mini-USB connection. Also used a Motorola V3 car charger, and I've just bought a Brodit car cradle for my device which has a fixed mini-USB which works fine?
KevinBaker said:
I used my old Motorola V3 wall charger to charge mine for a while, worked fine - thats a standard mini-USB connection. Also used a Motorola V3 car charger, and I've just bought a Brodit car cradle for my device which has a fixed mini-USB which works fine?
Click to expand...
Click to collapse
Interesting. We've found that unless the charger has pins 4 and 5 bridged ('unused pin' to 'ground') on the mini usb end then the hermes will act strangely. It will start charging the first time you insert but then it might stop and then it won't charge again until you reset it.
The pin doesnt need to be bridged when theres a data source like a pc on the other the end.
Could you check to see if your chargers have those pins bridged or not?
icemantwilight said:
Interesting. We've found that unless the charger has pins 4 and 5 bridged ('unused pin' to 'ground') on the mini usb end then the hermes will act strangely. It will start charging the first time you insert but then it might stop and then it won't charge again until you reset it.
Click to expand...
Click to collapse
I have not been doing any kind of research about bridging those pins because I just read about it first time, but my experience about charging problems are very similar to yours. My TyTN won't charge normally via USB-hub or car-adaptor, and after failing the charging process, it won't start charging again. Resetting helps after this, but I think that also waiting resets the situation. But that I'm not so sure about.
When I connect it directly to PC, it works just fine.
If bridging those pins helps, my car charging problems are wiped out
rantanplannet said:
If bridging those pins helps, my car charging problems are wiped out
Click to expand...
Click to collapse
Hahah not really, ever tried getting to those pins? They're tiny!
icemantwilight said:
Hahah not really, ever tried getting to those pins? They're tiny!
Click to expand...
Click to collapse
Yes, they are tiny at the other end, but bigger at the other
And if that causes still problems, cutting the wire is not so big deal either, then you can easily connect wires together
rantanplannet said:
Yes, they are tiny at the other end, but bigger at the other
And if that causes still problems, cutting the wire is not so big deal either, then you can easily connect wires together
Click to expand...
Click to collapse
Except that pin 4 doesn't have a wire connected to it (only 1,2,3,5) because the other end only has 4 pins
icemantwilight said:
Except that pin 4 doesn't have a wire connected to it (only 1,2,3,5) because the other end only has 4 pins
Click to expand...
Click to collapse
Damn .. then it's not so easy.
But I guess it's still possible, without totally breaking the plug. I hope ...
Interesting. That is exactly the issues I see using a 12V/USB adapter and cable in my car. Well hopefully in 2-3 months when my free vehicle charger comes from Cingular it will have the pins bridged and work properly!!!!
I wonder if the bridged pins and data cause the bluetooth to turn off after a period of time. I see that happen on my phone often when its connected and charging. But disconnected from the 12V/USB charger the BT stays on.
Thanks for testing and posting.
I had this exact problem with my m5000 to, i use a ipod battery extender as a backup for my m3100 as i regularaly find the need for extra power.
Quick work around for this problem is to power down completely by holding the power button. Then plug it in while turned off, wait for charging light to go orange then switch back on, will continue charging then until plug is removed.
HTH
V3
So, I don't understand: in the end, does it work or not with an adapter for V3?
If yes I could by that...
TX
If it helps any, I use an iGo universal power adaptor (available from Radio Shack and Expansys) which uses the iTips style device-specific tips. This is very similar to the Kensington system, although I believe the two are now incompatible.
Tip A53 (which is also designed for AudioVox phones) works well for me with my T-Mobile MDA Vario II.
http://www.igo.com/
I've got 4 different car chargers that *used* to work for my Note. I know they worked, because I did quite a bit of work over the last year which required the use of the GPS on my phone. Each one is > 1A. However, recently they've all stopped working for my Note. I've tested them using a Galaxy S3 and a Desire HD, and the chargers appear to charge the other phones just fine.
I seem to have no problems with AC or the computer charger it however. I've also taken the same USB cable I've used on the AC/computer and plugged it in to 3 of my car chargers, still no luck. Any ideas?
Your charge port needs to be replaced. If you're still under warranty, get it replaced. Otherwise there is a guide around here to DIY replacement I think..
I think we need more info. Since the phone charges at home the first suggestion is not helpful. The port is fine or it wouldn't charge at home. What ROM are you using? Did you try flashing a different ROM to test the charger in car? What were the results?
get a toothpick and make sure the metal in the port isnt touching any metal , then try , these ports in samsung phones are cheap , my wp7 focus had this happen , if it doesnt work ,its easy to solder it back in place , just open it up and make sure the solder is correct!
kimtyson said:
I think we need more info. Since the phone charges at home the first suggestion is not helpful. The port is fine or it wouldn't charge at home. What ROM are you using? Did you try flashing a different ROM to test the charger in car? What were the results?
Click to expand...
Click to collapse
The day after my post the AC charger stopped working with my phone as well. So after trying a couple more chargers, I took it into AT&T and got it replaced under warranty. However, since my wife and I both have the Galaxy Note, I may have to replace one in the future. Just in case someone needs it..
http://www.youtube.com/watch?v=pD9R-YUT69Q&feature=youtu.be
There's the video for replacing the usb port. Thanks for the help!
Hi I bought s3 5 months back and now im facing the slow charging issues.and at one point the phone wont charge at all.. blowing cleaning also didn't work.. I took it to the service centre. They first replaced the port and it didn't work. Later that day they told its mother board problem. They couldn't explain why. And couldn't tell whether wireless charger would fix this issue. If anyone could help me how to check hardware failure I could check myself and tell me if wireless charger would work nw??
I faced the same problem and the cause was my usb cable
Replace port failed and presuming a service centre would have a decent cable you need a new motherboard .
No way of knowing what has failed without removing the motherboard and testing each component end result you still need a new motherboard .
wireless charging
JJEgan said:
Replace port failed and presuming a service centre would have a decent cable you need a new motherboard .
No way of knowing what has failed without removing the motherboard and testing each component end result you still need a new motherboard .
Click to expand...
Click to collapse
Yes.. after replacing the new usb socket it didn't respond at all. I want to know whether I will be able to charge my phone using wireless charger. ??
arun090990 said:
Yes.. after replacing the new usb socket it didn't respond at all. I want to know whether I will be able to charge my phone using wireless charger. ??
Click to expand...
Click to collapse
did you try other cables like htc one's or blackberry's? because i too had the same problem for the 1st cable and used blackberry's. now again the second cable provided by samsung service center isn't working after few days. so now using htc cable.
sriram231092 said:
did you try other cables like htc one's or blackberry's? because i too had the same problem for the 1st cable and used blackberry's. now again the second cable provided by samsung service center isn't working after few days. so now using htc cable.
Click to expand...
Click to collapse
Yeah its the usb cable, samsung ones are rubbish, mine got to a point where it would charge 1 percent an hour, tried my brothers galaxy ace 2 charger which is all in one and charges from empty to full in about a hour and a half without affecting battery life
Sent from my GT-P5110 using xda app-developers app
S3 wireless charging
hulkrage said:
I faced the same problem and the cause was my usb cable
Click to expand...
Click to collapse
I tried, I dint work.. Does wireless charging will do???
s3 wireless charging
Does s3 wireless charging works for the slow charging problem through usb??
I've had the same problem - I've bought a new USB cable and now everything is OK.
S3 charging
GIBbeerSKY said:
I've had the same problem - I've bought a new USB cable and now everything is OK.
Click to expand...
Click to collapse
.
My port is not even working... Not detecting.. Nothing is happening. Any ideas to rectify??
You can take the battery out and use the universal charger.
I have found the Xperia Z2 to be an extremely slippery phone and it dropped to the floor quite a few times already, but the last fall seems to have finally damaged it. Now, when I connect it through USB to either a PC or power outlet, it will no longer charge. I can exchange data with my PC, view the external storage etc. just fine, but the charging icon will keep appearing and disappearing irregularly, about once per second. Meanwhile the battery gets drained instead of charged.
I now charge my phone through the magnetic port one the side of the phone, which is working fine. I would like, however, to know if there is a way to repair the USB port of my phone.
Many thanks
MrTheMan said:
I have found the Xperia Z2 to be an extremely slippery phone and it dropped to the floor quite a few times already, but the last fall seems to have finally damaged it. Now, when I connect it through USB to either a PC or power outlet, it will no longer charge. I can exchange data with my PC, view the external storage etc. just fine, but the charging icon will keep appearing and disappearing irregularly, about once per second. Meanwhile the battery gets drained instead of charged.
I now charge my phone through the magnetic port one the side of the phone, which is working fine. I would like, however, to know if there is a way to repair the USB port of my phone.
Many thanks
Click to expand...
Click to collapse
Seems like hard to repair. You would need to disassemble the whole device. I'd suggest you send the phone for warranty repair. Just do not mention you let it fall
Jackos said:
Seems like hard to repair. You would need to disassemble the whole device. I'd suggest you send the phone for warranty repair. Just do not mention you let it fall
Click to expand...
Click to collapse
The whole glass back panel was into pieces. I replaced it, so I'm afraid that is not an option
MrTheMan said:
The whole glass back panel was into pieces. I replaced it, so I'm afraid that is not an option
Click to expand...
Click to collapse
Look into the Z2 disassembling videos, but I guess you should bring the device into a professional phones repair service.
@MrTheMan I think I know what bricked your USB port. The damage wasn't from the fall, you just connected the Magnetic charging cable upside down... Didn't you?
If you keep tightly in some points, dies it charge then? If not and still charges intermediate then there are two things. Either one of the lines if the port is damaged or the battery is of center. Remove and reconnect. First clean it's contacts with.a brush and pure alcohol. Do the same on the port.
Mine does the opposite, USB is fine(as long as I disconnect at 100% and don't charge with MHL adapter) but magnetic has the issue.
Sent from my D6503 using Xparent Red Tapatalk 2
Upside down Magnetic charging cable
Jackos said:
@MrTheMan I think I know what bricked your USB port. The damage wasn't from the fall, you just connected the Magnetic charging cable upside down... Didn't you?
Click to expand...
Click to collapse
Hi,
I did connect my magnetic charging cable upside down. And my magnetic port is messed up now. It keeps charging and discharging when connected. It doesn't charge from a USB port and i need to plug in the adapter to a wall outlet for it to charge.
Is there anything i can do to fix this?
Xperia Z2 Charging Problem
hi, i have also xperia z2. i have also micro usb and magnetic charging problem, charging icon will keep appearing and disappearing irregularly, about once per second. how can i solve the problem? thanks
MrTheMan said:
I have found the Xperia Z2 to be an extremely slippery phone and it dropped to the floor quite a few times already, but the last fall seems to have finally damaged it. Now, when I connect it through USB to either a PC or power outlet, it will no longer charge. I can exchange data with my PC, view the external storage etc. just fine, but the charging icon will keep appearing and disappearing irregularly, about once per second. Meanwhile the battery gets drained instead of charged.
I now charge my phone through the magnetic port one the side of the phone, which is working fine. I would like, however, to know if there is a way to repair the USB port of my phone.
Many thanks
Click to expand...
Click to collapse
Jackos said:
@MrTheMan I think I know what bricked your USB port. The damage wasn't from the fall, you just connected the Magnetic charging cable upside down... Didn't you?
Click to expand...
Click to collapse
Hi, I have a Xperia Z2. My phone have the same problem after my sister put the magnetic charger upside down. My phone right now can only charge with the mangetic charger. My phone warranty already expired. I want to know is it really the usb port bricked? @MrTheMan, Have you repair your phone?
imranclick said:
Hi, I have a Xperia Z2. My phone have the same problem after my sister put the magnetic charger upside down. My phone right now can only charge with the mangetic charger. My phone warranty already expired. I want to know is it really the usb port bricked? @MrTheMan, Have you repair your phone?
Click to expand...
Click to collapse
The Mainboard is bricked.
Jackos said:
The Mainboard is bricked.
Click to expand...
Click to collapse
Oh, I see. That will cost a lot of money to repair it.
imranclick said:
Oh, I see. That will cost a lot of money to repair it.
Click to expand...
Click to collapse
I'm sorry for your loss. It would be extremely hard to repair that by yourself. If you're out of warranty there is nothing you can do about it.
Jackos said:
I'm sorry for your loss. It would be extremely hard to repair that by yourself. If you're out of warranty there is nothing you can do about it.
Click to expand...
Click to collapse
Cannot repair it at all? Oh,well. Thank you very much for the reply. :crying::crying::crying:
imranclick said:
Cannot repair it at all? Oh,well. Thank you very much for the reply. :crying::crying::crying:
Click to expand...
Click to collapse
If I remember correctly there is one diode on the PCB that get's damaged :/
I have the same problem, due to magnetic charger..
Surely this is covered by warranty? I'm still under warranty so I will try to get a replacement.
How could they design it so poorly that it can be damaged like this....
Jackos said:
If I remember correctly there is one diode on the PCB that get's damaged :/
Click to expand...
Click to collapse
Oh, I search some info. The diode just allow electric current pass one direction only. No wonder my XZ2 keep restart after I pressed shutdown because the diode allow the electric current from battery can pass through in opppsite way.
I don't believe it is a hardware problem. You dropped the phone but the USB port is not likely to be physically damaged by a knock. I had the same problem, on a Z2 provided by my company. I have requested a change, got a new one and in a few days the second handset had the same issue too. Two phones, both new, both never dropped, used with maximum care, both with the same problem. The second one wasn't even charged more than a couple of times before failure. And I had tried it as soon as I had it in my hands, just to be sure it worked, and it did, at first. I connected it to a laptop thru USB port (3.0) and it charged. Then updated apps and system to Lollipop, connected it again and it failed. In a couple of days. I'm sure nothing physical happened, unless my USB port fried it. Notice however, that data connection is working perfectly and everything else I connecrt to that port works as well.
I have some mag chargers too, and I don't believe I've ever connected them upside down. The plug is made in such a way the it does not connect if reversed, having one contact circular shape and the other elliptical.
I checked on the Web and there is a number of Z2 owners complaining for the same issue: there's even a video on Youtube showing this exact behavior. Sony seems to ignore it.
I must admit, however, that I'm unable to explain why a factory reset does not solve the problem. Now I'm trying to flash a stock ROM (mine is branded Telecom Italia) and see what happens.
imranclick said:
Hi, I have a Xperia Z2. My phone have the same problem after my sister put the magnetic charger upside down. My phone right now can only charge with the mangetic charger. My phone warranty already expired. I want to know is it really the usb port bricked? @MrTheMan, Have you repair your phone?
Click to expand...
Click to collapse
Did you repaired your device. Please relpy this
Phone 2 years.
1. Charged through the USB port on the network 220 (native charger):
It reaches 81-83% of charge and starts to go crazy: flashing red LED charging and says that is / is not going to charge.
In fact, no charges.
I tried different cords and chargers - so everywhere is going crazy with a 80% interest
2. Charged via USB from the cigarette lighter in your car or the external battery:
It's okay - safely charged up to 100%
3. Charged through the magnetic cable:
It's okay - safely charged up to 100%
These are symptoms of what is dying?
Thank you!
this is my work ... whit TAB 8.4 !!!
installed in my Audi A6 and connected to the car radio SONY REMOTE APP.
Slot car with homebuilt electric motor to eject the tablet !!
Fit in dual din
http://www.youtube.com/watch?v=kaRtDMauLQM
Very nice, just please don't watch movies while driving.
Nice! I want to do this in my 06 gti with some sort of custom fabricated float mount. Does your car use can bus?
Sent from my SM-T320 using Tapatalk
I removed the car stereo and just installed a radio sony bluetooth in the glove box.
I used the original system already complete amplifier.
I connected the outputs radio connector at busquadra connector AUDI!
looks fine...
mannyy said:
I removed the car stereo and just installed a radio sony bluetooth in the glove box.
I used the original system already complete amplifier.
I connected the outputs radio connector at busquadra connector AUDI!
Click to expand...
Click to collapse
Its cool. I'm testing same setup have u had any problems with auto connect bluetooth?
Not problem. . But I need push a sony radio for connection bluetooth App remote. .
I have call a Sony for this .. but need manual input..
Any one interested in this check out proclips (Google them). A non invasive easy way to install a tablet in the car. Works great with the Ford Sync system but anything with Bluetooth would be good. I've had iPad's, Note tabs, and now the 8.4 in my Fusion.
8.4 in my Jeep
Here's my setup in my Jeep. I got a custom mount that sits over the stock stereo. It slides in an out and locks. When I want it more secure, I slide it out and I have a lock box below my seat.
I ordered a ground loop adaptor to fix the hum when it's being charged and plugged into AUX. I'm currently shopping for a DAC that I can connect to a charge enabled OTG cable. The best I've seen is LAVA SimulCharge USB 1 but I wish it had more ports. Anyone find anything better?
TheBlueDuck said:
Here's my setup in my Jeep. I got a custom mount that sits over the stock stereo. It slides in an out and locks. When I want it more secure, I slide it out and I have a lock box below my seat.
I ordered a ground loop adaptor to fix the hum when it's being charged and plugged into AUX. I'm currently shopping for a DAC that I can connect to a charge enabled OTG cable. The best I've seen is LAVA SimulCharge USB 1 but I wish it had more ports. Anyone find anything better?
Click to expand...
Click to collapse
I have the lava adapter works pretty good. U can buy a 1 male to 3 female USB adapter for more ports. Make sure u have a good 2.1 amp charger and cable for the lava or it won't charge to good. I use a official Samsung car charger and the USB cable that came with the tab pro gets about 1000ma with my DAC hooked up. I use the Behringer uac 202 USB dac best for the money. Has optical also.. No ground loops or noise with optical.
b3ltazar said:
I have the lava adapter works pretty good. U can buy a 1 male to 3 female USB adapter for more ports. Make sure u have a good 2.1 amp charger and cable for the lava or it won't charge to good. I use a official Samsung car charger and the USB cable that came with the tab pro gets about 1000ma with my DAC hooked up. I use the Behringer uac 202 USB dac best for the money. Has optical also.. No ground loops or noise with optical.
Click to expand...
Click to collapse
Thanks. I was hoping I could get a 1/3 USB adaptor for more ports, but I didnt know if it would work. I have a two different 2.1 amp chargers now, and it barely gives any juice to it. It says max 1200 or so but it bare;y gets 3-400. It keeps the screen on and it drops a % every 5-10 min. I looked at the Behringer uac 202 but I'm connecting to a stock deck that goes have RGA inputs so I'm going in through an AUX jack. I could try an optical to headphone cable I suppose.
The ground loop cable I got killed the hissing noise. Is the UAC 202 a noticeable difference worth the extra cost and time setting it up? I'm concerned it will slow down charging even more. Does it suck up a lot of juice?
The sound difference is huge with the 202 dac even if u use the headphone out jack. Alot more clarity and output. doesn't suck much juice at all. U should invest in a Samsung Branded car charger most chargers say 2.1 amps but put out half.
Thanks, I just purchased the 202 and the lava so I'll be able to test this out this weekend.
I couldnt find the general samsung car charger that didn't have a cord already attached though.
Now I just need to find a USB backup camera solution and my car setup will finally be complete.
TheBlueDuck said:
Thanks, I just purchased the 202 and the lava so I'll be able to test this out this weekend.
I couldnt find the general samsung car charger that didn't have a cord already attached though.
Now I just need to find a USB backup camera solution and my car setup will finally be complete.
Click to expand...
Click to collapse
Lava just came out with the 3 port looks very nice.. ordered one will let u know how it works.
b3ltazar said:
Lava just came out with the 3 port looks very nice.. ordered one will let u know how it works.
Click to expand...
Click to collapse
Goodluck. The 3 port one looks pretty large. Does that function differently than if we were to buy a 1 to 3 USB adaptor?
I have my 1 port working correctly. Strangely whenever I use the Lava adaptor it lists it as 100% charges right away, but if I unplug the charger it drops back down to whatever it really is. Not a huge deal, but annoying to not see the accurate battery level when plugged in.
The 3 port adapter is supposed to be better with charging and has a button for charge only wich is cool. And according to lava there is no power feedback from the tablet to the the adapter. The tablet port keeps my usb dac on even when I unplug power With the one port. And I'm sure that the 3 port will have no problem with a dac hard drive and mouse (hopefully will let everyone know when I get it in a week or so).the one port would have a power supply issue with all 3 devices.