Related
Let me just start off by saying I have tried everything (free) under the sun to unlock my S3 (I9300). I have learnt more in the last 2 days about my phone than I have in the past 2 years of owning it. From rooting and trying unlock apps to downgrading and trying the service mode glitch, I've tried it. It is more of a quest at this point. I would have paid to unlock it by now if it wasn't for my stubbornness.
From what I understand, since I am on version 4.3 and have EFS v2 (with no EFS v1 backup), there is no way to network unlock my phone without getting an unlock code from my network or a website, both of which require payment.
I can understand how the network is able to get an unlock code but what I don't understand is how various websites can 'calculate' unlock codes for my device, especially without the device at hand.
In theory, why can't I calculate the unlock codes myself? If I can, how?
No, codes aren't calculated -they come from a database that you can't access. Give up and buy a code.
BPate said:
I can understand how the network is able to get an unlock code but what I don't understand is how various websites can 'calculate' unlock codes for my device, especially without the device at hand.
In theory, why can't I calculate the unlock codes myself? If I can, how?
Click to expand...
Click to collapse
I actually have the codes that Vodafone provides free of charge with it's Network unlocking tool, unfortunately these codes don't work and they have yet to give me a reason why. The only thing I can hope for is a way to flash back to efs v1 but so far as I know it's impossible.
I bought a sgh-t399n at a garage sale recently and quickly rooted the phone and installed TWRP Recovery and CM12 on it. I called Metro and T-Mobile ( After flashing their firmware) for the unlock code but of course they refused to give it to me. So i tried 2 or 3 different unlock by IMEI websites as well as every single unlock app and software I could find while running logcat. The best lead I've gotten was the S.G.S. Unlock Tool app. It says it found the code but the results are null. In the logcat the system denies permission saying that the app was sending request as -2 when it was 0 and that it needed "android.permission.INTERACT_ACROSS_USERS_FULL" to accsess the info. Now I'm not a Dev by any definition of the term, nor am I any kind of hacker but I have learned a good bit from these forums over the last couple of years and my gut tells me this can be done with a little patients and some help from the good folks at XDA. Any imput on the subject is greatly appreciated.
You won't be able to unlock on CM12, have to have the stock firmware and OS installed.
yeah install stock system and any code should work without issue
If you unlock on stock system and then flash cyanogen, will it be fine?
-Tofu- said:
If you unlock on stock system and then flash cyanogen, will it be fine?
Click to expand...
Click to collapse
Yes.
es0tericcha0s said:
Yes.
Click to expand...
Click to collapse
The unlock code must be hidden on one of the partitions of the device it's self though right? Possibly in the EFS partion? Also how would i change thepermissions of an app to allow in to interact acroo all users?
Whether or not the code is in EFS, you still can't unlock on CM.
No I understand that. It is currently on the T-Mobile stock T399 firmware flashed with odin but still could not get an unlock code . Also i would like to learn to unlock these phones for future devices.
So it is not requesting an unlock code when you have a non T-Mobile SIM card installed? How odd... It should. If not, either it's already unlocked, or something else is going on. Have you tried both the Metro and Tmo firmware? Only the newest T-Mobile and Metro phones are not supported by unlocking via code as they use the Unlock app. As far as unlocking yourself, your best bet would be to get an unlock box like z3x or Octopus if you plan on doing a lot of them. If it's just 1 every year or 2, then it wouldn't make sense. Some phones have ways to unlock via root and hacks, but not all and it is becoming less common now as more manufacturers are making the ways to unlock more difficult either via encryption or other means.
The unlock companies I tried were unable to get a code by imei. Therefore I was never able to put in a real code. I've looked in to the z3x but it is way outta my price range as I am only a novice tinker. I just figured since the code must be in the programing of the phone somewhere then it was just a matter of locating the partition and file in which it was hidden and then decoding it. Is it possible to change an apps or users permissions? If so how?
rkey1000 said:
The unlock companies I tried were unable to get a code by imei. Therefore I was never able to put in a real code. I've looked in to the z3x but it is way outta my price range as I am only a novice tinker. I just figured since the code must be in the programing of the phone somewhere then it was just a matter of locating the partition and file in which it was hidden and then decoding it. Is it possible to change an apps or users permissions? If so how?
Click to expand...
Click to collapse
I believe the app Root explorer allows you to change permissions on items.
It does, but nothing Root Explorer can do will help you find an unlock code, unfortunately. If the phone does not ask for a code when inserting another carrier's SIM, then that's the issue that would need to be resolved before anything else.
Sorry if I've been unclear. The phone dose ask for a code when a sim from a different carrier is put in but after trying 3 unlock by IMEI companies none of them were able to generate a code by IMEI. As for the permissions issue, I have an app that claims to find the codes but only says "null" in the results column. After going through the log cat it says the app is running as user 0 but is requesting info as user -2 and that it needs the permission " INTERACT_ACROSS_USERS_FULL" to show the info. So i was hoping to learn how i grant said app that permission and see if it would show the code?
solidus636 said:
yeah install stock system and any code should work without issue
Click to expand...
Click to collapse
can you paste a link to the stock system?
Could anyone PLEASE PLEASE PLEASE PLEASE PLEASE give me a working unlock code for my metro pcs phone email me [email protected] or [email protected] thank you.
Running into the same problem only im on a non rooted system. I need a solution to get the codes needed to unlock it from T-mobile and need them without running hardware as all i have is hardware from the old days. Software would be a choice if anyone knows of anything reliable. Services I am also willing to pay for if cheap and working.
Hi Forum. May be my first post. I just SIM unlocked LG V10 on T-Mobile. Here is what I can say about the process that might be helpful to others:
1-Phones can be SIM locked by manufacturers so that service providers ensure that phones can only be used on their network or certain countries. See https://en.wikipedia.org/wiki/SIM_lock for more information.
2-The process of unlocking requires the service provider to request unlock codes from the manufacturer. The service provider may have requirements to unlock ( e.g. in my case I had to put $100 balance on T-Mobile prepaid card ). This process took 5 working days at which time T-Mobile emailed me to inform me that they were ready for me to initiate unlock on my device.
3-On my device, I ran a "Device Unlock" app which connected with somebody ( T-Mobile ? ) and verified my phone was actually unlock eligible and viola. I'm SIM unlocked.
What I would like to know is what has changed on my phone ( e.g. firmware, some information on some partition ) ? Does this mean I can now root, change ROMs and my phone will remain SIM unlocked ? Any links to information about what actually happens when device unlocked would be appreciated.
slomo2
What I can tell you is that, if you did unlock permanent it is going to be unlocked even after rooting and installing new roms etc.
Now, I want to ask in this forum if the phone can be unlocked if the t-mobile unlock app says it is not eligible to unlock. I bought my phone on eBay, called t-mobile the phone is clean, but they could not unlock it for me because needs an account... So now I'm stuck trying to find a 3rd party unlock website to do it, 2 already said they could not... So I have the phone but can't use it. Any suggestions?
Yes, I can confirm that on this LG V10 having performed a SIM unlock and then having switched ROMs the unlock remained in effect.
I have a ANS UL40 phone through Assurance wireless / >Virgin Mobile> Sprint.. and am trying to root this phone so I can get the SPC code to run DFS tools. Have used DFS and loaded phone and unlock with default password, but when I try 000000 spc unlock says device offline and all prompts in all fields go from yellow to red and in a few minutes go back to yellow showing device info.
I need info off this phone to flash my SM-N900P phone over to Assurance Wireless. The UL40 phone uses a sim card, have tried in note 3 but no service and then sim locked please reboot phone. I have tries on UL40 many different rooting apks and through pc. Most say root fail or your phone doesn't seem to be able to root. Any help would be appreciated. To root the ANS UL40 and also how to flash over Note 3. I have done flashing before on a note 2. So i basically know what to do. When I did try to flash over the note 3 I just get your account cannot be verified when calling 611 (without the sim) but when I insert sim its says no sim or sim locked reboot phone. Thanks
Guess nobody knows
kingroot rooted the ans, but I rebooted and it earesed it, and it didn't seem to give out permission s, not in a joking manner
---------- Post added at 01:44 AM ---------- Previous post was at 01:41 AM ----------
lexcin said:
kingroot rooted the ans, but I rebooted and it earesed it, and it didn't seem to give out permission s, not in a joking manner
Click to expand...
Click to collapse
do you know which 32bit drivers this phone might use?
I tried that one and it didn't root it and so many other programs and or apk's. Do not know if this phone is arm -- 64-- or 32. I do know that the maker of the phone actually is Teleepock company in China ** http://www.teleepoch.com/en/ ** no info on this model phone on their website..
Default file manager is CyanogenMod File Manager
mjmplus said:
I have a ANS UL40 phone through Assurance wireless / >Virgin Mobile> Sprint.. and am trying to root this phone so I can get the SPC code to run DFS tools. Have used DFS and loaded phone and unlock with default password, but when I try 000000 spc unlock says device offline and all prompts in all fields go from yellow to red and in a few minutes go back to yellow showing device info.
I need info off this phone to flash my SM-N900P phone over to Assurance Wireless. The UL40 phone uses a sim card, have tried in note 3 but no service and then sim locked please reboot phone. I have tries on UL40 many different rooting apks and through pc. Most say root fail or your phone doesn't seem to be able to root. Any help would be appreciated. To root the ANS UL40 and also how to flash over Note 3. I have done flashing before on a note 2. So i basically know what to do. When I did try to flash over the note 3 I just get your account cannot be verified when calling 611 (without the sim) but when I insert sim its says no sim or sim locked reboot phone. Thanks
Click to expand...
Click to collapse
Hi,
My friend just got the same phone and while setting it up for her I noticed that the default file manager is called CyanogenMod File Manager. It's probably meaningless but thought I'd share it just in case there's some sort of CyanogenMod back door. Good luck and if you do get it rooted please let me know.
I found a paid root that will root UL 40 Assurance choose the 6 mo lan.. https://www.oneclickroot.com/support-packages/
I wouldn't have asked on here if I wanted to pay for it, and they are not a guarantee they can do it. have read somewhere that someone ask them to do the same phone and they could not............ And no still no root. Probably does not matter. Talked to Assurance wireless rep today and they said lots of people are complaining about this phone. I have had in less than 2 weeks of getting it, had to have them warranty it and they sent me the same one. It would reboot on it's own and yes did factory reset. Now have the replacement, haven't done any kind of rooting or anything and on day 2 it starting to not be able to make phone calls. Says phone is not responding. Did a factory reset on this one and still doing same thing. Sometimes it does make a call and sometimes not. Pissed I am....
I stumbled across a site. Idk but it looks like it could contain some valuable info you may need or may be looking for. Send me a message or email me for the link. Since I've not posted before, it won't allow me to post the link.
I have decided to go to another provider for my cell phone and the UL40 phone will be no more. After talking to them so many times and finding they are complete idiots. Because they keep sending me a phone that stops working correctly after 1-3 days. Even before I started trying to root. I even talk to a real English speaking (LOL) person and they told me what I already knew, the ANS UL40 phone is a complete piece of ****. So many people have complained to them about that phone they decided not to ship out anymore. Now what kind of phone i will get from other carrier, I'll have to wait and see. Thanks all.............
mjmplus said:
I have a ANS UL40 phone through Assurance wireless / >Virgin Mobile> Sprint.. and am trying to root this phone so I can get the SPC code to run DFS tools. Have used DFS and loaded phone and unlock with default password, but when I try 000000 spc unlock says device offline and all prompts in all fields go from yellow to red and in a few minutes go back to yellow showing device info.
I need info off this phone to flash my SM-N900P phone over to Assurance Wireless. The UL40 phone uses a sim card, have tried in note 3 but no service and then sim locked please reboot phone. I have tries on UL40 many different rooting apks and through pc. Most say root fail or your phone doesn't seem to be able to root. Any help would be appreciated. To root the ANS UL40 and also how to flash over Note 3. I have done flashing before on a note 2. So i basically know what to do. When I did try to flash over the note 3 I just get your account cannot be verified when calling 611 (without the sim) but when I insert sim its says no sim or sim locked reboot phone. Thanks
Click to expand...
Click to collapse
I have the same phone and I still don't know how to get the MLS code, try enableling the diag ports with ##3424# and hopefully that way you'll get the spc I would let you know if I figure it out
I am looking for a custom ROM for my ANS UL40
Hello.
I was wondering if there would be anyone nice enough to make a custom ROM for the ANS UL40. I would do i tbut I don't have the coding skills or patience to do so.
ANS UL40 "Cast" compatibility w/Actiontec ScreenBeam Mini2
Asking if ANS UL40 "Cast" will run Actiontec ScreenBeam Mini2.
UL40 is "CAST" standard compatible with Mini2 (WiFi Mirocast and INTEL WiDi certified) ?
UL40 able to PARE WiFi and update Mini2 firmware. UL40 says CONNECTED, but click "CAST" and phone goes back to WiFi. Mini2 screen says Connection Failed.
If able to preform firmware update, then UL40 is communicating w/Mini2 so, UL40 should be compatible, but "CAST" fails.
Please advise.
Many kind thanks.
Any luck unlocking this phone so far?
Have not tackled that yet. LEMNO if you succeed.
Best.
RussianIce said:
Any luck unlocking this phone so far?
Click to expand...
Click to collapse
FedCURE said:
Have not tackled that yet. LEMNO if you succeed.
Best.
Click to expand...
Click to collapse
Hope someone can figure out how to gain root access on this phone I have it and It would be a blessing
you can unlock the bootloader in android dev settings "OEM unlocking", once in bootloader cmds like "fastboot oem unlock" or "fastboot flashing unlock" do nothing when connected with usb, what a shame. In recovery (vol up + power) there's an option to mount system, it does but I doubt that can lead to anything root access wise, btw, root noob.
mjmplus said:
... So many people have complained to them about that phone they decided not to ship out anymore...
Click to expand...
Click to collapse
Could you elaborate!?
In which market are you in?
It seems to me that they are still shipping it in many markets Assurance Wireless is in, like Oregon for example... so how did you come by that information?
I got this phone a couple days ago and got my msl code by running adb logcat while dialing ##data# and entering the wrong code, it was 536978 and used this on DFS to change it to 000000 then I was able to access everything once I entered ##diag# and then 000000, and enabled diagnostics. If I can get a working stock firmware or boot IMG I could root through magisk and then do separate fastboot boot (magisk patched)boot.img. I am unable to find a stock firmware for this device if anyone can let me know and I'll have root for us.
jdeandeck said:
I got this phone a couple days ago and got my msl code by running adb logcat while dialing ##data# and entering the wrong code, it was 536978 and used this on DFS to change it to 000000 then I was able to access everything once I entered ##diag# and then 000000, and enabled diagnostics. If I can get a working stock firmware or boot IMG I could root through magisk and then do separate fastboot boot (magisk patched)boot.img. I am unable to find a stock firmware for this device if anyone can let me know and I'll have root for us.
Click to expand...
Click to collapse
Did you ever create a working root? I have this phone as well.
micro sd card
Does anyone know what is the maximum micro sd card supported by this phone?
Own a s9 + sprint closed g965u device
Can you use open cct software to open network encryption for any other network ...
Will it succeed or will it cause a malfunction?and what the difference between this framework
<attach >>??
Plz help
Thx :good:
prof.sparrow25 said:
Own a s9 + sprint closed g965u device
Can you use open cct software to open network encryption for any other network ...
Will it succeed or will it cause a malfunction?and what the difference between this framework
<attach >>??
Plz help
Thx :good:
Click to expand...
Click to collapse
Umm CCT is Xfinity mobile.If it is network lock flashing firmware does not unlock it...It needs to still be unlocked by carrier,Or a paid service some where . Which are flaky at best most of the time....
Sprint verizon and several others Sim unlocks Employ a MSL code Which is like 15 or more digis long If im not correct....
As being the owner of samsung unlocking software I had to my self resort to server unlock to unlock my device....Because traditional methods were not working...
So long story short you can flash any carrier firmware you want But if the device is still sim locked it is sim locked..
So you dont go flashing loads and brick your device.:good::good::good:
TheMadScientist said:
Umm CCT is Xfinity mobile.If it is network lock flashing firmware does not unlock it...It needs to still be unlocked by carrier,Or a paid service some where . Which are flaky at best most of the time....
Sprint verizon and several others Sim unlocks Employ a MSL code Which is like 15 or more digis long If im not correct....
As being the owner of samsung unlocking software I had to my self resort to server unlock to unlock my device....Because traditional methods were not working...
So long story short you can flash any carrier firmware you want But if the device is still sim locked it is sim locked..
So you dont go flashing loads and brick your device.:good::good::good:
Click to expand...
Click to collapse
Thx brother..