Related
Hi people
I've been searching all around the web and since I cannot post a thread in the dev. section I'll write in here
Oppo seems to have disabled and hidden the F9 fasboot mode and give a fake unlocked bootloader status, once I try the ADB devides the phone will flash for a milisecond for what seems to be the opperation of it. and then restarts
Since there's no kernel and source code for rooting, unlocking the bootloader and all of that, is it possible to modify the rom in a way or basically get an access to the fastboot mode?
I've noticed there's a thread about R7 model facing the same problem and one was given the factory flasher throuh PM (and not in the thread for everyone for some reason..) and it solved. https://forum.xda-developers.com/r7-plus/help/oppo-r7sf-fastboot-mode-recovery-mode-t3437774
Thank you!
Help for no fastboot for OPPO F9
Help for no fastboot for OPPO F9..plz help someone.i was trying to install TWRP and a custom rom but there is not fastboot or bootloader..help me..I think in older versions it had..so is there any way to downgrade ... help me plzzzz.
May be this helps:
https://droidrecovery.com/oppo-f9-recovery-mode/
No bro there is no response when I press Vol+ Power
So khan, what happened did you manage to make it work, if it doesn't work go to oppo service centre
Since the oppo Color OS is updated to 7.1 the fastboot mode requires a serial key to unlock itself first and this can only be done by the oppo customer service centers or a 3rd party or development apps like the "in depth test" application which is available for Oppo find X and Reno.
So, Until an suitable app is available for Oppo f9 pro fastboot unlocking it is stuck on normal use only.
Wonder if anyone knows how to unlock the bootloader and root the Oppo Find X3 (not Pro)? This is the device that sits just below the Pro-Model - essentially same hardware with a slightly less capable CPU (Snapdragon 870 instead of 888). The device runs a version of ColorOs intended for the Chinese market only (at this stage). Easy to enable developer options, allow OEM unlocking and enable USB debugging. But so far I have not found a way to access fastboot mode and proceed to unlock the bootloader. Any ideas?
Waited 4 yrs to upgrade from a OnePlus5 and these Chinese system apps are such a downer. Glad to see you two on to the right questions.
tigerfelix said:
... The device runs a version of ColorOs intended for the Chinese market only (at this stage). Easy to enable developer options, allow OEM unlocking and enable USB debugging. But so far I have not found a way to access fastboot mode and proceed to unlock the bootloader. Any ideas?
Click to expand...
Click to collapse
remind me of the steps?
tigerfelix said:
Wonder if anyone knows how to unlock the bootloader and root the Oppo Find X3 (not Pro)? This is the device that sits just below the Pro-Model - essentially same hardware with a slightly less capable CPU (Snapdragon 870 instead of 888). The device runs a version of ColorOs intended for the Chinese market only (at this stage). Easy to enable developer options, allow OEM unlocking and enable USB debugging. But so far I have not found a way to access fastboot mode and proceed to unlock the bootloader. Any ideas?
Click to expand...
Click to collapse
I'm facing the same issue. Have activated USB debugging on my X3 Pro, but when I shut down and restart whilst also holding volume up button, it doesn't go in to fast boot. Is there a way of activating fast boot by plugging phone into computer?
p1gnone said:
remind me of the steps?
Click to expand...
Click to collapse
The steps to enable developer mode? Go to About Phone, there you will see a screen with lots of info about the phone, including the OS. Tap on *Baseband & kernel", then you see three infos. There you click multiple times on "Build number", which will unlock developer mode. This you then find under "Additional settings" in the main settings. Then you can enable "OEM unlock" (which doesn't help unless you can access the bootloader and actually unlock it...) and "USB debugging". I'll survive without root for now, hoping some clever XDA devs will figure this device out eventually. It's an amazing phone, and I hope they will release a true international version of the firmware at some point, so I won't see the Chinese core-apps anymore...
Global phones have purposely has the fastboot command blocked, so even if there was a twrp there is no way to flash it, no matter what you do, holding volume down on boot, commands or any other method won't work. Chinese models I believe can have it done but need to download an app, then apply to have permission to unlock.
gaztom78 said:
Global phones have purposely has the fastboot command blocked, so even if there was a twrp there is no way to flash it, no matter what you do, holding volume down on boot, commands or any other method won't work. Chinese models I believe can have it done but need to download an app, then apply to have permission to unlock.
Click to expand...
Click to collapse
My phone IS a Chinese model; the regular FX3 (non-pro). With Oppo (cr)App Store and all sorts of China-centric rubbish. What is the name of the app that might let me access the bootloader?
tigerfelix said:
My phone IS a Chinese model; the regular FX3 (non-pro). With Oppo (cr)App Store and all sorts of China-centric rubbish. What is the name of the app that might let me access the bootloader?
Click to expand...
Click to collapse
Deeptest. Apk or in depth test.apk Google them a new version 1.1 was released three days ago but no info on what model phone it is for
Thanks for the tip. Among other things, I came across this:
OPPO Community
Talk, share, and learn everything about the beautiful possibilities of technology together with other OPPO fans.
community.coloros.com
Sounds like this is for devs only, and not yet for the FX3. So for now, I'll keep my hands off it - don't think I'm at the required skill level yet. But still - a good tip, and it gives me some hope that root access might be possible in the near future.
I have what I'm pretty sure is the global variant and I am able to enter fastbootd
Oh wow. Great! May I ask you to please share how you manged to pull that off? And once you accessed fastboot, did you e.g. manage to root the device? Please, also here, a "how" would be preferred over a "yes"?
Or is there a way to root the phone with apps like KingoRoot etc?
I'm not pro in this area, but i find this:
Spoiler: link
How To Unlock OPPO Find X3 Pro Bootloader - NaldoTech
Follow this guide to learn how to unlock the bootloader on your OPPO Find X3 Pro. Most modern Android phones come with locked bootloaders, which make it
www.naldotech.com
Has anybody managed to root or install magisk on the find x3 pro?
Thinking about buying this phone but only under this premise.
Speaka said:
Has anybody managed to root or install magisk on the find x3 pro?
Thinking about buying this phone but only under this premise.
Click to expand...
Click to collapse
So buy oneplus or xiaomi. Dont buy oppo.
Can someone try it? I do not have experience.
OPPO FindX3/X3Pro深度测试解锁BL刷ROOT首发指导教程-ROM乐园官网
目前OPPO FindX3系列机 型ROOT门槛偏高,不那么友好,本教程为ROM乐园首发,其他网站禁止私自转载发布
www.romleyuan.com
georgiy8428 said:
Can someone try it? I do not have experience.
OPPO FindX3/X3Pro深度测试解锁BL刷ROOT首发指导教程-ROM乐园官网
目前OPPO FindX3系列机 型ROOT门槛偏高,不那么友好,本教程为ROM乐园首发,其他网站禁止私自转载发布
www.romleyuan.com
Click to expand...
Click to collapse
This is what this website tells you when trying to download the app you listed:
1. This service is a one-time payment, the order can be displayed in the personal center after purchase, and it can be used unlimitedly within the validity period
2. The phone comes with a BootLoader model at the factory, please unlock the BL by yourself in advance, and then make a paid purchase
3. The flashing package information belongs to the payment for flashing the data, and not for other services such as paid assistance. Please be aware
4. Relevant introductions and pictures are for reference only, different models may have differences, the address will be automatically obtained after purchase 5. For problems such as resource failure or error, you can contact online customer service QQ or WeChat in the personal center after successful purchase
You have to unlock your bootloader before you can use this app, that is supposed to unlock the bootloader.....
OPPO Phone unlock is not paid service, OPPO Offical release unlook app here: https://www.oppo.cn/thread-397164526-1
Unlock app for find x3 direct download link: https://img-oppo-cn-test.oss-cn-shenzhen.aliyuncs.com/uploads/common/2021/02/10/15554642501.apk
This app only work on ColorOS 11, If you're using Coloros 12, you must downgrade to Coloros11.
If you're using china version, you can download a downgrade rom here (Do not change the zip name): https://561234.xyz/设备/Find X3/C11降级包
Update:
Not china version findx3 please use OplusDowngradeTool to download the downgrade rom.
https://561234.xyz/d/设备/Find X3/C11降级包/OplusDowngradeTool.zip
This tool maybe chinese only, there is a video for how to use it:
https://561234.xyz/设备/Find X3/C11降级包/OplusDowngradeTool-OperationDemo.mp4
exg0zz said:
OPPO Phone unlock is not paid service, OPPO Offical release unlook app here: https://www.oppo.cn/thread-397164526-1
Unlock app for find x3 direct download link: https://img-oppo-cn-test.oss-cn-shenzhen.aliyuncs.com/uploads/common/2021/02/10/15554642501.apk
This app only work on ColorOS 11, If you're using Coloros 12, you must downgrade to Coloros11.
If you're using china version, you can download a downgrade rom here (Do not change the zip name): https://561234.xyz/设备/Find X3/C11降级包
Click to expand...
Click to collapse
Hello. I now have Android 12 c.31. And I can not roll back to A11. What other options?
georgiy8428 said:
Hello. I now have Android 12 c.31. And I can not roll back to A11. What other options?
Click to expand...
Click to collapse
Currently there's no method to unlock oppo phone on android 12.
Hi all!
Today my Oppo Reno 5G 10x Zoom arrived. As my previous phones I would like to root my new phone too to use e.g. Titanium Backup.
I have currently installed Color OS V7.1, Android 10, Model CPH1921, Build CPH1921EX_11_C.35.
I did the following:
Enable the Developer Options on your device. To do this, go to Settings>>About Phone>>tap on the Build Number 7 times till you see a toast message “You are now a developer”.
Under the Developer Options, you need to enable the OEM Unlock option as well. To do that again head to the Settings>>Developer Options>>enable OEM Unlock.
Download and set-up the ADB and Fastboot tools on our PC.
Now, head to the Platform-tools folder and open the CMD or command prompt.
Now, in the command prompt, enter the below command and press the Enter button on your keyboard;
adb devices
You will get a pop-up on your smartphone with a message “Always allow from this computer”. You need to press OK
Type the below command to enter the bootloader mode, and press Enter;
adb reboot bootloader
After rebooting the fastboot window (this window) appears for about 1s an the phone immediatelly reboots.
So I am unable to finnish the steps from this guide.
What am I doing wrong or what is the problem causing this?
Thanks for any help in advance!
Try to see if your device supports bootloader unlock.
You'll need an app (deep testing) to apply for permission before you can unlock it.
I'm also looking for a way to unlock my bootloader... Same model cph1921. Mine unfortunately says it's a carrier phone so I can't go ahead with the unlock. I'll tinker around to change region and unlock if that be possible.
Let me know how you get along @htcdesire-hd
Hnk1 said:
Try to see if your device supports bootloader unlock.
You'll need an app (deep testing) to apply for permission before you can unlock it.
I'm also looking for a way to unlock my bootloader... Same model cph1921. Mine unfortunately says it's a carrier phone so I can't go ahead with the unlock. I'll tinker around to change region and unlock if that be possible.
Let me know how you get along @htcdesire-hd
Click to expand...
Click to collapse
Hi,
thanks for the suggestion with this app, that might be useful for me in the future!
That the Oppo Reno was not unlockable (or at least I did not find a way) was a dealbreaker for me! So I sent it back to the retailer a few days after writing the post above.
That means I am not able to test the app you suggested with the Oppo Reno 5G anymore.
Now I have a Xiaomi Poco F2 Pro 256GB and I am very happy with my device. Unlocking and rooting was even supported by the manufacturer (after 1 week mandatory waiting time) and the Hardware is also very good. So I am glad I sent back the Oppo Reno...
htcdesire-hd said:
Hi,
thanks for the suggestion with this app, that might be useful for me in the future!
That the Oppo Reno was not unlockable (or at least I did not find a way) was a dealbreaker for me! So I sent it back to the retailer a few days after writing the post above.
That means I am not able to test the app you suggested with the Oppo Reno 5G anymore.
Now I have a Xiaomi Poco F2 Pro 256GB and I am very happy with my device. Unlocking and rooting was even supported by the manufacturer (after 1 week mandatory waiting time) and the Hardware is also very good. So I am glad I sent back the Oppo Reno...
Click to expand...
Click to collapse
I hadn't have an oppo before so was unaware they are so strict with the bootloader. I ordered a OnePlus as well but still have the oppo. I'll try sometime and let you know.
For me, not having ad free experience and unable to change dpi is a deal breaker
Hnk1 said:
I hadn't have an oppo before so was unaware they are so strict with the bootloader. I ordered a OnePlus as well but still have the oppo. I'll try sometime and let you know.
For me, not having ad free experience and unable to change dpi is a deal breaker
Click to expand...
Click to collapse
Yes same for me, I also thought that Oppo is not that restricted! Ok, thanks, I will look forward to that.
Everyone has their own preferences. For me the adds in the system apps are barely annoying and I don't have any reason to change my DPI (battery performance is enough at my point of view). At most not having a 10x zoom is a little bit annoying but there are versions of my phone which have a 10x zoom instead of a macro camera.
I wonder if it would be possible to install the "update" with the modified Magisk boot.img to gain root access. Unpacking boot.img is hassle-free, but despite the "codecs" for 7zip, I can't repack the archive with the modified file. There is also the issue of bricking the oppo .. Has anyone tried something? Any other ideas?
Did anyone come to a solution for this , its such a great phone
First of all, i need to say that my english is not the best since im from brazil, anyway that said, im trying to unlock my realme bootloader, ive already tried to use Deep test. But every time that i try to install the app i recive this error messange "An app with the same signature has already been installed", and i also have tried using ADB and Fastboot, but every time that i try to reboot my cellphone in fastboot, it only gives me a black screen and restarts the cellphone, if anyone know some way to resolve this, or know what to do, would help me a lot
It's possible that some fastboots have a timeout if you don't talk to them.
Are you sure that you're not getting fastboot at all?
Are you using Linux or Windows? lsusb or devmgmt.msc?
Renate said:
It's possible that some fastboots have a timeout if you don't talk to them.
Are you sure that you're not getting fastboot at all?
Are you using Linux or Windows? lsusb or devmgmt.msc?
Click to expand...
Click to collapse
im using windows, my primary suspect is that im in fact not getting to the fastboot at all
Decision by Oppo: No Bootloader/Fastboot access for Oppo Phones starting 2016
Decision by Oppo: No Bootloader/Fastboot access for Oppo Phones starting 2016 I was surprised to not find this information in any of the forums. This is why I'm posting this thread to prevent further confusion and future xda-enthusiastic "Phone...
forum.xda-developers.com
Wow, 2016? And they haven't gone out of business yet?
aIecxs said:
Decision by Oppo: No Bootloader/Fastboot access for Oppo Phones starting 2016
Decision by Oppo: No Bootloader/Fastboot access for Oppo Phones starting 2016 I was surprised to not find this information in any of the forums. This is why I'm posting this thread to prevent further confusion and future xda-enthusiastic "Phone...
forum.xda-developers.com
Click to expand...
Click to collapse
wow i didnt have read or found anything about this, but that gives me a little question, how do ppl actually flashs custom ROM's on realme phones?
you can unlock with official In-Depth Test apk
or
unofficial unlock method without fastboot (mtkclient)
aIecxs said:
you can unlock with official In-Depth Test apk
or
unofficial unlock method without fastboot (mtkclient)
Click to expand...
Click to collapse
When i try to use in-depth test says "Device incompatible"
of course that was just example possibility, I don't know if apk exist or unlocking seccfg works. do your homework
[DISCUSSION] A thread to collate and share what is known about unlocking fastboot on Oppo devices
Admin: Please move/delete this thread if it is in the wrong place or against the rules. I wanted to create a thread to discuss unlocking fastboot mode on Oppo devices in general, rather than discussing it in terms of any one device in...
forum.xda-developers.com
when i use Deep Test 1.0.1 it says that my device dosent suport deep test, when i try to install the 1.1.0 version thats happens
try this
Hello Fellows,
I've got a Redmi 9 Pro for Linux purposes, but the phone came with FRP triggered and of course, I couldn't get access to the sellers
account. I spare you the details, because I am sure, every one knows a story like that.
I checked xda and the web about guides for quite some time, and actually found a lot of them, but none of them worked. At the end I could combine
some of these guides to actually make it happened. I've created a little screen recording to show all the steps that worked for my device.
Yes you can actually install and open almost every apk even with a triggered FRP. Almost means, you can even enable the developer options, but
they don't show anything for that user.
Initial situation:
Xiaomi Redmi 9 Pro EEA (joyeuse)
Bootloader Locked
triggered FRP Lock
find my device - OFF
No MI-Account
Software Variant 1:
Firmware: MIUI V12.0.2.0.QJZEUXM Stable Official Update for Redmi Note 9 Pro EEA (joyeuse)
Android 10 - Miui 12
Android Security Patch Date: 2021-01-21
Software Variant 2:
Firmware: MIUI V12.5.8.0.RJZEUXM Stable Official Update for Redmi Note 9 Pro EEA (joyeuse)
Android 11 - Miui 12.5
Android Security Patch Date: 2022-03-01
FRP Bypass start conditions:
Wifi is connected
The basic idea and steps:
Get into System Settings via the Help & Feedback from Gmail to disable and stop certain apps.
Only for this is the wifi needed, if you type delete, the right help topic will show up
2x Android Setup
Carrier Dafault App
Google Play Services (must be disabled at the very last)
enable the Accessibility Suite to re-enable Google Play Services at the right moment
Continue the actually process to setup the phone, the procedure will stuck at "Just a sec..." "Checking for updates..."
now try to re-enable the Google Play Services, once this is done, the FRP Bypass will take place the next step
One important note, after enabling Google Play Services, its Storage and Cache must be deleted!
This is one of the main reasons why it didn't worked for me the first 100 times i tried.
It does go through though, but right at the moment the setup is finished, the FRP Lock gets triggered and
we are back at the beginning.
Enabling the Google Play Services can be annoying, because the screen is flashing/changing so fast, that the touch
will not be accepted right away. But there is plenty of time to try until it hits.
Finish the setup process until you see the home screen
Execute the factory reset over the settings menu and the FRP is gone for good
Optional, you can enable oem unlock before you factory reset the phone
With oem unlock enabled, the phone can't get FRP Lock on.
Spoiler: FRP Bypass and Reset Android 10 - Miui 12
Spoiler: FRP Bypass and Reset Android 11 - Miui 12.5
Regarding Bootloader Unlock, which es mandatory to install Linux (Ubuntu Touch) on this phone.
I couldn't found any free way to either unlock the bootloader without Mi-Account, or reboot the phone into EDL.
They are some Apps I tried so far:
Xiaomi Sideload Tool and ROM2box from Romprovider.com
But they need MIUI Recovery 5.0, and I only have MIUI Recovery 3.0
And don't want to upgrade, because Ubuntu Touch need Android 10
Does anybody have more information about that exploit these Sideload Apps are using?
I don't get how you can read data from and adb sideload connection, where you just can upload zip files
for updates
EDL from the famous Bjoern Kerler "bkerler" (MTK-Client)
For this tool the phone must be in EDL Mode, which I can't get into it
Does anybody know a way how to do that without Test Point? I tried so many ways, but none worked.
I even compiled fastboot and adb from AOSP, but the "old" ways like reboot-edl don't work.
My last hope is a USB-C V2 Cable/Dongle from Team Hydra.
Updates will follow...
[Update 1: 2023-04-25]
The FRP Bypass Procedure also works on Android 11 MIUI 12.5
[Update 2: 2023-04-25]
I've built the EDL Cable/Dongle, but it didn't work. I've bought the official
Hydra EDL Cable V2, exact same result, it also didn't work. Hydra refuses to give me a straight answer to this issue, even as a customer. The shop I've bought it
from, asked Hydra as well, with the feedback, this could be a SPD issue.
But still, they refuse to tell me, which SPD I need to get it working. At this
time I was on SPD 2021-01-21, and they published the EDL Cable Pinouts in Dec. 2022 [Latest Security]. So this was a very false promise from Hydra or rather mobilerdx, not sure who's to blame here, perhaps myself.
[Update 3: 2023-04-25]
I've wrote an ADB and Fastboot Sniffer for Windows. Which worked
pretty well, and I was able to get the ADB commands from the Xiaomi Sideload Tool. So the Exploit is basically, that you can perform ADB PULL and ADB PUSH while your in SIDELOAD Mode, that's it. And that it uses a built-in command to gather the partition structure while you are in the
normal ADB Mode.
With that knowledge now, I've also wrote a Bash pendant from the Xiaomi Sideload Tool -> Xiaomi SideLoad Terminal Tool (xsltt). Which inherits all its functions plus a bit more user comfort.
With this tool, I was able to delete my xloader, and the device now boots
straight into EDL Mode. Which is great, you can call this a Software Testpoint.
But, there is always a but, it seems that there is still no proper firehose file out there, that bypasses this annoying EDL authentication. And no, I will not even try to bypass that myself, this is way over my head.
So I would very much appriciate it, if someone can point me to a working firehose file that bypasses the EDL authentication for the Redmi Note 9 Pro (joyeuse).
I am facing the same problem, can not find the right firehose tool.
And all the apps that claim they have proper firehose file are all paid service.
since you have hydra tool, did they work for the edl? since they said they have the right firehose file.
ccaye said:
I am facing the same problem, can not find the right firehose tool.
And all the apps that claim they have proper firehose file are all paid service.
since you have hydra tool, did they work for the edl? since they said they have the right firehose file.
Click to expand...
Click to collapse
Haha, no they don't. They even recommended me the hydra dongle in their own telegram support channel. Now i have this dongle since a day, they say it is not supported in EDL Mode, only Sideload mode. And now i have to find someone who can fix the phone remotely with a auth service account. Isn't it great?
I'
newbit said:
Hello Fellows,
I've got a Redmi 9 Pro for Linux purposes, but the phone came with FRP triggered and of course, I couldn't get access to the sellers
account. I spare you the details, because I am sure, every one knows a story like that.
I checked xda and the web about guides for quite some time, and actually found a lot of them, but none of them worked. At the end I could combine
some of these guides to actually make it happened. I've created a little screen recording to show all the steps that worked for my device.
Yes you can actually install and open almost every apk even with a triggered FRP. Almost means, you can even enable the developer options, but
they don't show anything for that user.
Initial situation:
Xiaomi Redmi 9 Pro EEA (joyeuse)
Bootloader Locked
triggered FRP Lock
find my device - OFF
No MI-Account
Software Variant 1:
Firmware: MIUI V12.0.2.0.QJZEUXM Stable Official Update for Redmi Note 9 Pro EEA (joyeuse)
Android 10 - Miui 12
Android Security Patch Date: 2021-01-21
Software Variant 2:
Firmware: MIUI V12.5.8.0.RJZEUXM Stable Official Update for Redmi Note 9 Pro EEA (joyeuse)
Android 11 - Miui 12.5
Android Security Patch Date: 2022-03-01
FRP Bypass start conditions:
Wifi is connected
The basic idea and steps:
Get into System Settings via the Help & Feedback from Gmail to disable and stop certain apps.
Only for this is the wifi needed, if you type delete, the right help topic will show up
2x Android Setup
Carrier Dafault App
Google Play Services (must be disabled at the very last)
enable the Accessibility Suite to re-enable Google Play Services at the right moment
Continue the actually process to setup the phone, the procedure will stuck at "Just a sec..." "Checking for updates..."
now try to re-enable the Google Play Services, once this is done, the FRP Bypass will take place the next step
One important note, after enabling Google Play Services, its Storage and Cache must be deleted!
This is one of the main reasons why it didn't worked for me the first 100 times i tried.
It does go through though, but right at the moment the setup is finished, the FRP Lock gets triggered and
we are back at the beginning.
Enabling the Google Play Services can be annoying, because the screen is flashing/changing so fast, that the touch
will not be accepted right away. But there is plenty of time to try until it hits.
Finish the setup process until you see the home screen
Execute the factory reset over the settings menu and the FRP is gone for good
Optional, you can enable oem unlock before you factory reset the phone
With oem unlock enabled, the phone can't get FRP Lock on.
Spoiler: FRP Bypass and Reset Android 10 - Miui 12
Spoiler: FRP Bypass and Reset Android 11 - Miui 12.5
Regarding Bootloader Unlock, which es mandatory to install Linux (Ubuntu Touch) on this phone.
I couldn't found any free way to either unlock the bootloader without Mi-Account, or reboot the phone into EDL.
They are some Apps I tried so far:
Xiaomi Sideload Tool and ROM2box from Romprovider.com
But they need MIUI Recovery 5.0, and I only have MIUI Recovery 3.0
And don't want to upgrade, because Ubuntu Touch need Android 10
Does anybody have more information about that exploit these Sideload Apps are using?
I don't get how you can read data from and adb sideload connection, where you just can upload zip files
for updates
EDL from the famous Bjoern Kerler "bkerler" (MTK-Client)
For this tool the phone must be in EDL Mode, which I can't get into it
Does anybody know a way how to do that without Test Point? I tried so many ways, but none worked.
I even compiled fastboot and adb from AOSP, but the "old" ways like reboot-edl don't work.
My last hope is a USB-C V2 Cable/Dongle from Team Hydra.
Updates will follow...
[Update 1: 2023-04-25]
The FRP Bypass Procedure also works on Android 11 MIUI 12.5
[Update 2: 2023-04-25]
I've built the EDL Cable/Dongle, but it didn't work. I've bought the official
Hydra EDL Cable V2, exact same result, it also didn't work. Hydra refuses to give me a straight answer to this issue, even as a customer. The shop I've bought it
from, asked Hydra as well, with the feedback, this could be a SPD issue.
But still, they refuse to tell me, which SPD I need to get it working. At this
time I was on SPD 2021-01-21, and they published the EDL Cable Pinouts in Dec. 2022 [Latest Security]. So this was a very false promise from Hydra or rather mobilerdx, not sure who's to blame here, perhaps myself.
[Update 3: 2023-04-25]
I've wrote an ADB and Fastboot Sniffer for Windows. Which worked
pretty well, and I was able to get the ADB commands from the Xiaomi Sideload Tool. So the Exploit is basically, that you can perform ADB PULL and ADB PUSH while your in SIDELOAD Mode, that's it. And that it uses a built-in command to gather the partition structure while you are in the
normal ADB Mode.
With that knowledge now, I've also wrote a Bash pendant from the Xiaomi Sideload Tool -> Xiaomi SideLoad Terminal Tool (xsltt). Which inherits all its functions plus a bit more user comfort.
With this tool, I was able to delete my xloader, and the device now boots
straight into EDL Mode. Which is great, you can call this a Software Testpoint.
But, there is always a but, it seems that there is still no proper firehose file out there, that bypasses this annoying EDL authentication. And no, I will not even try to bypass that myself, this is way over my head.
So I would very much appriciate it, if someone can point me to a working firehose file that bypasses the EDL authentication for the Redmi Note 9 Pro (joyeuse).
Click to expand...
Click to collapse
I'm ready to fund for research cause. I will invest in the tool that I know which allows EDL authentication so that we can verify if it works with your device.
Please let me know so that together we can succed in fixing your phone.
mvikrant97 said:
I'
I'm ready to fund for research cause. I will invest in the tool that I know which allows EDL authentication so that we can verify if it works with your device.
Please let me know so that together we can succed in fixing your phone.
Click to expand...
Click to collapse
Thank you for your generous offer, I am not sure If I understand you right, plus I don't have the need
for charity. To be honest, I don't even have a clue, what to believe now. They all promise you honey
flowing in rivers, but can't really deliver.
They are tools called EMT and UAT Pro. Never heard about them before. But they claim they have
auth support for this model in EDL mode. UAT even offers a pure software solution for an affordable price.
If you are willing to fund your self, please try it out, and report back.
newbit said:
Thank you for your generous offer, I am not sure If I understand you right, plus I don't have the need
for charity. To be honest, I don't even have a clue, what to believe now. They all promise you honey
flowing in rivers, but can't really deliver.
They are tools called EMT and UAT Pro. Never heard about them before. But they claim they have
auth support for this model in EDL mode. UAT even offers a pure software solution for an affordable price.
If you are willing to fund your self, please try it out, and report back.
Click to expand...
Click to collapse
I won't be investing in those tools. Both EMT and UAT allow auth flashing however I know a tool called Xiaomi Pro tool which supports auth flashing and it works and the investment is pretty low so I can invest in that tool to help you out with auth flashing.
I cannot discuss any further as XDA does not allow that.
mvikrant97 said:
I won't be investing in those tools. Both EMT and UAT allow auth flashing however I know a tool called Xiaomi Pro tool which supports auth flashing and it works and the investment is pretty low so I can invest in that tool to help you out with auth flashing.
I cannot discuss any further as XDA does not allow that.
Click to expand...
Click to collapse
Yeah that's weird, I've read this a lot, never had any issues with XDA about that.
Anyways, I can't find any manufacture website to the Xiaomi Pro Tool, so I cannot compare.
I think 15 bucks for are 3 Months time period is much cheaper compared to the 110 I've paid
for this Hydra Dongle, which brings me zero yet. So please, write me a PM with a link to a shop.
Just a little Update.
Thank your @mvikrant97, Xiaomi Fire Tool did the trick. They don't unlock bootloader,
but flash firmware with EDL auth. And now my phone is back to life. Support was very good, in fact,
they were the only ones who responded at all. Very patience and polite as well. Plus, very affordable.
Once my phone is fully charged, battery was totally drained since it was in EDL Mode for weeks, I will see
what Hydra has to offer. Btw: They've banned me from their Support Channel, without any explanation.
I guess I asked the wrong questions, pitty.
newbit said:
Just a little Update.
Thank your @mvikrant97, Xiaomi Fire Tool did the trick. They don't unlock bootloader,
but flash firmware with EDL auth. And now my phone is back to life. Support was very good, in fact,
they were the only ones who responded at all. Very patience and polite as well. Plus, very affordable.
Once my phone is fully charged, battery was totally drained since it was in EDL Mode for weeks, I will see
what Hydra has to offer. Btw: They've banned me from their Support Channel, without any explanation.
I guess I asked the wrong questions, pitty.
Click to expand...
Click to collapse
I'm very happy to learn that your phone is fixed.
While the rest we can discuss in PM!