Related
DISCLAIMER:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WARNING: KNOX GET VOIDED!
This rom is for J500FN model.I don't know if it does work on J500F or any other model. If you want to try, just remove assert lines in updater-script, BUT i'm not responsible if you brick your phone!
Is working on J500F model. Thank you @the-bomber for confirmation!
Read here to see how to remove assert lines: How to remove assert lines
Post #1 : Features, Download link, how to install the rom, credits.
Post #2 : Changelog, Bugs, to do list
Post #3 : FAQ/TIPS.
[QRCODE][/QRCODE]
INTRODUCTION:
Hello!
I'm Robert, an satisfied and happy user of the Samsung Galaxy J5 ( J500FN), but somehow bored of it since it doesn't have any custom rom or kernel, in few words, xda support. At begin, i was planning to build Cyanogenmod or AOSP and an custom kernel with minimal features, but i lack the knowledge to do it, but it's not impossible, just that i have alot of headache and i'm not that happy with that. I was also planning to do an custom rom too, with many features and many themes available, this is easier, but again alot of headache. I can't promise i would do these, but i may try again to make a better custom rom.
So, here is Stock ROM Advanced. It's just an simple rom, nothing more yet. Check out the features section for more informations.Screenshots attached ( switch XDA theme to 2013 or 2015 theme from bottom of page and click on Screenshots tab if you can't see them.
Please share this XDA thread since Galaxy J5 doesn't have it's own xda forum...
FEATURES:
- Based on firmware J500FNXXU1AOI1_J500FNDBT1AOI2_J500FNXXU1AOI1
- Pre-Rooted with SuperSU (v2.66)
- Busybox installed (v1.24.1-osm0sis)
- Zipaligned all system apps (for better utilization of RAM) - What mean this? <--- click
- Deodexed - What mean this? <--- click
- Debloated - removed some samsung apps and some other unecessary apps for more RAM, more internal memory available and less wakelocks (so more battery). More info about removed apps in post #2.
- Knox removed
- Faster boot & shutdown
- Faster than stock? You tell me
Click to expand...
Click to collapse
That's all the features it has now. Is just an custom rom based on stock rom, with some minimal changes, but improving the daily experience, at least for me. I can't promise, but maybe in future i will make it more than an simple rom, with more features. I repeat, can't promise it. I have decided to add more features in next version.
DOWNLOAD:
Stock_ROM_Advanced <<< click. Just mediafire link for now.
DO NOT MIRROR THE ROM. IF YOU WANT AN MIRROR, LET ME KNOW AND I WILL UPLOAD IT TO THE WEBSITE YOU WISH since i have good network! Thank you!
INSTALLATION:
(it's actually easy to install it, but i've wrote it this way because there may be new people to XDA which just wish the rom and doesn't want to bother by searching to how to do it)
1. Download the rom and put it on your External SD Card ( make sure you have enough space).
2. Download this TWRP recovery: TWRP recovery by @aapav01 - more info about this recovery at CREDITS
You can also use TWRP 3.0 by [MENTION]Nick Verse [/MENTION]which is fully working. Big thanks to him as well. If you didn't know yet, he also made a KERNEL for our J5
3. Download ODIN program. I'm using v3.09
4. Enable the OEM unlock bootloader option at developer options (if you can't see Developer Options, then go to Settings > About phone and tap 7 times build number).
5. Reboot your phone in download mode by keeping pressing Power button + home button + volume DOWN button at same time for few seconds. After an blue screen will appear, press volume up button.
6. Connect your phone with usb cable to your PC.
7. Open ODIN program and an number should appear at ID:COM. If it doesn't, then make sure that the phone usb drivers are installed.
8. Click on AP or PDA ( according to the version of odin which you downloaded) and choose the TWRP recovery you've downloaded and click START. Wait until the process finish.
9. Now go to TWRP recovery by keeping pressing Power button + home button + volume UP button at same time for few seconds.
10. Choose Wipe, then Advanced wipe and choose Dalvik Cache, System, Data and Cache and then Swipe to wipe.
11. Now choose Install and go to the place where you did put the ROM and choose it. Wait till installation finish and DON'T REBOOT YET.
12. Flash GAPPS. I use Open Gapps, ARM 5.1.1 pico version. http://opengapps.org/ . It's XDA thread is HERE .
13. Wipe dalvk cache & cache.
14. Reboot & WAIT 5-10 minutes until it boot!. Only first boot is longer. NOTE: When you reboot, if it ask you for SuperSU choose "do not install".
15. If you followed all the steps carefully, then everything will be OK. Enjoy
Click to expand...
Click to collapse
Flashing GAPPS is required because if you don't you will be stuck at setup wizard. This issue is probably caused by one of the removed apps. However, it won't cause any other problem. So, flashing GAPPS is a must right after you flash the rom, but you can remove them if you wish after you finish Setup Wizard.
CREDITS:
@SuperR. for his nice and useful kitchen.
@aapav01 for the TWRP recovery. Big thanks to him because without the recovery, you couldn't even flash the rom!
@osm0sis for busybox
@Chainfire for SuperSU
@Force me, for doing this small rom
Pressing the THANKS button does give me some satisfaction/motivation
XDA:DevDB Information
Stock ROM Advanced, ROM for all devices (see above for details)
Contributors
Force
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Lollipop 5.1.1 & TWRP ( knox get voided)
Based On: Official Stock ROM
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2016-02-01
Created 2016-02-01
Last Updated 2016-07-25
Changelog
CHANGELOG:
Code:
v1.0 - Initial version
BUGS:
- WiFi. Two guys confirmed me that WiFi isn't working, but is working fine for me.
WIFI got working! Read HERE and HERE.
Flash LINARO KERNEL and WIFI will work. Thank you @Nick Verse for the kernel and @swistakkk1 for confirmation.
Maybe is not fully debloated, but i didn't have any issue after i've deleted these apps. i can remove even more to make the rom lighter, apps which doesn't suit for me, which some people would want them... I may add AROMA zip to let people choose what apps they want to remove.
/system/app deleted apps
/system/priv-app deleted apps
FAQ / TIPS
1. How do i install Xposed Framework?
Follow these steps: http://forum.xda-developers.com/showpost.php?p=64490530&postcount=2
This is a list of confirmed working modules until now:
Code:
- [URL="http://forum.xda-developers.com/xposed/modules/xprivacy-ultimate-android-privacy-app-t2320783"]XPrivacy[/URL]
- [URL="http://forum.xda-developers.com/xposed/modules/xposed-appopsxposed-appops-4-3-t2564865"]AppOpsXposed[/URL]
- [URL="http://forum.xda-developers.com/xposed/modules/app-bootmanager-t2432359"]Boot Manager[/URL]
- [URL="http://forum.xda-developers.com/xposed/modules/mod-obb-sd-v0-1-t2884004"]Obb on SD[/URL]
- APM+
- Gpm notification seek bar[L-M]
- ScreenOffAnimation
- Android Phone Vibrator
- Flat Style Bar Indicators
- Greenify
- NoSafeVolumeWarning
- Notification Manager
Thank you:
@22rp420 @nov01 for confirming some xposed modules!
If you know more xposed modules which are working on our phone, share with us!
2. My phone is running slow / has lag. Why?
My phone haven't lag or ran slow never and i'm using Power Saving mode all the time.
Use Greenify app to hibernate the apps which are running in background. Maybe you don't want Facebook or other apps running in background, eating RAM and battery while you use your phone or while your phone is in idle/standby. Then Greenify become useful. It does help gaining some more available RAM and also battery.
Also, don't use any Task killer because it is not necessary. It just does the opposite: make the phone run slow.
3. My battery drain too fast!
People use phone different. Everyone. My best SOT (screen on time) was 13 hours. Maybe you can or can't achieve that SOT. It all depends of how you use the phone.
The biggest battery drainer on Android are:
- Facebook app, facebook messenger
- Google Services
Greenify does help gaining battery too.
You should install BetterBatteryStats app to see what is draining your battery.
Personally, i'm using facebook in browser and i enable play services when i need them. I disable them with Tasker app by running some shell commands. Of course, you can do this with init.d too or some other apps. I will share the shell commands which i'm using later. I have maximum 10 minutes wakelocks in BetterBatteryStats widget and my battery doesn't drain even 1% per night.
FAQ/TIPS
reserved
It is absolutely fantastic to see fellow forum/country who have worked and learned a lot and return help to the community.
Big like to you @Force !
Razvan
Sorry @Force i may not be able test your work as i don't have access to my pc right now and don't know for how long but once i get time and access back i will firstly try your rom. But yes anyways thanks for the development.
@Force this ROM work on SM-J500H?
smk.mosharraf said:
@Force this ROM work on SM-J500H?
Click to expand...
Click to collapse
WARNING: KNOX GET VOIDED!
This rom is for J500FN model.I don't know if it does work on J500F or any other model. If you want to try, just remove assert lines in updater-script, BUT i'm not responsible if you brick your phone!
Click to expand...
Click to collapse
It was specified at the begin of the thread...
Wifi
@Force WiFi is not working i have reinstalled this rom a few times now and it still wont let me switch the wifi on i have even tried going back to stock and the wifi is still working fine there any suggestions
galaxysi9000freak said:
@Force WiFi is not working i have reinstalled this rom a few times now and it still wont let me switch the wifi on i have even tried going back to stock and the wifi is still working fine there any suggestions
Click to expand...
Click to collapse
Did you flash it on J500FN?
I haven't experienced this problem. I will look into this.
Are there more people who experienced this? Please let me know.
Force said:
Did you flash it on J500FN?
I haven't experienced this problem. I will look into this.
Are there more people who experienced this? Please let me know.
Click to expand...
Click to collapse
yes i did flash this on the j500FN
Wifi
Force said:
Did you flash it on J500FN?
I haven't experienced this problem. I will look into this.
Are there more people who experienced this? Please let me know.
Click to expand...
Click to collapse
Thank you for this rom, but Wifi doesn't work :crying:
galaxysi9000freak said:
@Force WiFi is not working i have reinstalled this rom a few times now and it still wont let me switch the wifi on i have even tried going back to stock and the wifi is still working fine there any suggestions
Click to expand...
Click to collapse
MAICK-LGG3 said:
Thank you for this rom, but Wifi doesn't work :crying:
Click to expand...
Click to collapse
I don't have any issue with the WiFi, but I think that the problem might be caused by WlanTest which I've removed it.
Later, I'll post here an flashable zip which does bring the WlanTest back and hopefully Wifi gets fixed.
Thank you both for reporting this!
Razvan said:
It is absolutely fantastic to see fellow forum/country who have worked and learned a lot and return help to the community.
Big like to you @Force !
Razvan
Click to expand...
Click to collapse
YES! Indeed!
@MAICK-LGG3 @galaxysi9000freak
I'm sorry for being late and also that i haven't made an flashable zip. I uploaded an zip file containing the WlanTest.apk.
1) Download WlanTest zip and extract the zip on your sdcard.
2) After you extracted the zip, you will have an folder named WlanTest and inside the folder WlanTest.apk. Use an file explorer with root and move the folder WlanTest to /system/app.
3) Set permission for the folder like this: http://i.imgur.com/gin3axj.png .
4) Set permission for WlanTest.apk from inside of folder like this: http://i.imgur.com/NXy772e.png .
5) Reboot
Let me know if this fix your wifi problems.
I was quite busy on working on the rom. Starting from next version, the rom will have a new name. It will also be themed, will have it's own logo and own bootanimation and more. Don't wanna spoil
I see that this thread has 600+ views already which is nice to see it
Doesn't work
Force said:
@MAICK-LGG3 @galaxysi9000freak
I'm sorry for being late and also that i haven't made an flashable zip. I uploaded an zip file containing the WlanTest.apk.
1) Download WlanTest zip and extract the zip on your sdcard.
2) After you extracted the zip, you will have an folder named WlanTest and inside the folder WlanTest.apk. Use an file explorer with root and move the folder WlanTest to /system/app.
3) Set permission for the folder like this: http://i.imgur.com/gin3axj.png .
4) Set permission for WlanTest.apk from inside of folder like this: http://i.imgur.com/NXy772e.png .
5) Reboot
Let me know if this fix your wifi problems.
I was quite busy on working on the rom. Starting from next version, the rom will have a new name. It will also be themed, will have it's own logo and own bootanimation and more. Don't wanna spoil
I see that this thread has 600+ views already which is nice to see it
Click to expand...
Click to collapse
Wlantest tested, doesn't work
MAICK-LGG3 said:
Wlantest tested, doesn't work
Click to expand...
Click to collapse
Can you take a logcat please?
How to take logcat
Start taking the logcat and then try to put wifi on. Also, try to wipe dalvik cache and cache in recovery.
Thank you!
MAICK-LGG3 said:
Wlantest tested, doesn't work
Click to expand...
Click to collapse
if @Force doesnt have wifi problem, you should download again the rom and flash it
could be a download problem and some files can be corupted.
i meet many times this "download isue" and was fixed in this mode
just try it! @Force you can test the uploaded package too.
Trimis de pe al meu SM-J500FN folosind Tapatalk
Force said:
Can you take a logcat please?
How to take logcat
Start taking the logcat and then try to put wifi on. Also, try to wipe dalvik cache and cache in recovery.
Thank you!
Click to expand...
Click to collapse
i have tested this and wifi is still not working i have a log
View attachment 3631908
thanks for the rom
confirmed working fine on J500F !
if u need any help i'll be happy to help you since i have themed and developed roms ...
i was lazy to work on a rom but since you started i'll help if u need any
thanks for the awesome rom !!
edit: WIFI isn't working !
Disclaimer: I am not responsible for anything bad that may occur with your device, but I will take all the credit you can give me if it works for you!
This ROM is based on Stock AOSP firmware. I'd like to make ROM similar to original PIXEL firmware, so here you can see my current development.
This version is only for flashing via TWRP! (it can be found here https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647)
Version Information
Status: stable (suits for everyday usage)
Created: 01.04.2019
Updated: 28.06.2021
Android version: kernel 3.18.35, android 7.0 Nougat
What's done/features
Added ROOT (Magisk)
New bootanimation
Custom navigation bar
System accent color is blue (instead of teal color)
Advanced reboot menu
Pixel launcher with a lots of settings
New default wallpaper
Arkamys Sound Enhancement
Miravision patch added
All messengers should work now! (what's app, facebook. etc).
Patch adds this things from Google Pixel device
Bootanimation
Fonts
Sounds and alarms
Bugs
No. Let me know if you find any.
Installation
Download firmware to internal storage
Reboot into TWRP
Do this wipes in Wipe section: system, cache, dalvik,data
Reboot recovery: go to reboot section -> choose Reboot recovery
Go to install section and choose .zip package
After installation completed just reboot device and enjoy
If you face error "failed to mount system" or something like this after installation completed - don't mind it and reboot
After you completed system setup reboot to recovery again and flash patch without wipes.
Flash arkamys patch without wipes. Install parts one by one! Turn it on at settings -> sounds -> arkamys.
Flash Miravision patch same way . Turn it on at settings -> screen -> Miravision
Screenshots
P.S After device is booted you can choose any language on system setup. Patch is not applied here!
Download
The download link is here - https://drive.google.com/drive/folders/1mcDIUiXlYGjvsBo47RtDbv3mLBaSSNlC?usp=sharing
If you would like to support further development - https://www.paypal.me/teclastT8development
Very good rom. Much better than official.
It installs and runs fine. How can I access or customize the nav bar? I don't see any options anywhere, or for many other customizations I would like to perform.
ForgottenSolstace said:
It installs and runs fine. How can I access or customize the nav bar? I don't see any options anywhere, or for many other customizations I would like to perform.
Click to expand...
Click to collapse
It means navbar differs from stock only. If you would like to customize it try to install Substratum theme engine and choose navbar mod for AOSP (android 7.0). It should work fine.
thank you for your job, is the patch include in the ROM ?
[email protected] said:
thank you for your job, is the patch include in the ROM ?
Click to expand...
Click to collapse
No, you should flash it manually after firmware was installed.
Clicking sound
The ROM is pretty nice so far but whenever I click a button or icon I get clicking sounds that sound like interfering noises, trough my headphones. I don't know what could cause it and with the stock ROM I didn't had that issue.
Hello!!!
Thank you Dev for your awesome work!!!
Anyone knowif this Firmware work on a Teclast Tablet M8 (M8X1)??
Thank you
Hi,
how can I change the font size?
Thanks!
chris78c said:
Hello!!!
Thank you Dev for your awesome work!!!
Anyone knowif this Firmware work on a Teclast Tablet M8 (M8X1)??
Thank you
Click to expand...
Click to collapse
Of course it won't work. These tablets have completely different Processors and architecture.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip(s) - firmware and Magisk (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and Magisk
Information
This is native tablet port with normal keyboard, animations and other stuff.
My port based on:
framework and apps: T510XXU1ASCE and T515XXU1ASCK (new Tab A 10.1 SM-T510\515) Android 9.0 with 2019-03-01 security patch
libs and etc: A600NKSU1ZSB6 (SM-M105F) Android 9.0 with 2019-02-01 security patch
kernel: based on M105FDDU1ASB2 (SM-M105F) Android 9.0 3.18.91
Additional
1. Added OC for CPU (1690MHz - Kernel Adiutor, EX Kernel Manager) and GPU (default 1001, in OC 1146MHz - EX Kernel Manager)
2. Added themes from A600N
3. new wlan driver driver 4.0.10.206A_20181017 (from A600FNXXU3BSC5)
Links
LTE version:
1. 20190523: https://drive.google.com/file/d/1tK1F92bTWaaOBqUbkyVL8j3Sw50B0kre/view?usp=sharing
WiFi version:
1. 20190523: https://drive.google.com/file/d/1v2OM_IL8SCq5rLxOG1Vy21syd2KTq-Zd/view?usp=sharing
Magisk
Before run Magisk installer in TWRP - you need run small script - https://drive.google.com/file/d/1ZnnKHtDAl0ioHjQXiNO6wErZN8odsO0P/view?usp=sharing
It's simply unmount /cache partition and then mount it as /vendor. After run the script, you can install Magisk. If Magisk Manager does not appear in the list of apps - extract magisk.apk from Magisk installer and manually install it.
Sources
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Thanks
Thanks to Samsung
good morning Valera! I've been waiting for this a lot, since Samsung Pie is very good rom, I've already downloaded and flashed it. I just had time to try the basics and everything seems to work and the Ui is nice. Then I will make a good revision. Thank you very much for your great works!
@Valera1978 First of all, thanks for the great Pie port. Tab feels brand new, smooth. One thing I have found is the Themes/Wallpapers don't work. It will download wallpapers but when you go to apply, all you see is a black square, and nothing is applied. If it is an animated one for lock screen, it fc's the systemui when you try. Not a big deal as I can always apply wallpapers from my own collection. This is only issue so far and I have a feeling there won't be many more if any. Thanks for your works!!!
great job from shortcomings is at present a problem with the keyboard
I like this rom, it seems clean and pretty and I would like to be able to install magisk but I do not understand how to do it, could you explain it ?. Thank you
Bootloop
I tried this on my T580 coming from RR latest Pie ROM. Backed up ROM, factory reset wipe and installed just the wifi port. Wiped dalvic and rebooted. Bootloops at first Samsung screen. What did I do wrong?
edit: Never mind. Used Advanced Wipe for everything but Internal and SD. Booting now.
Great rom. Thanks for your effort.
Looks good thank you.
Are there other people who get a failed when they try to sign in the Samsung account?
In the pie_t510_t580_port there are the follwing settings that don't work or crashes, or don't belong in the wifi version and if it's possible should be removed.
T-roaming
Service provider
Mobile networks
Also in the About tablet there is some LTE version information
There is also the mobile hotspot settign in the connections
Cellphone signal icon in the at the top next to the wifi signal
These are for when you have the LTE version
Great work man!!! Thanks for your work!!
Anyone managed to download other languages keyboards in samsung keyboard because swiftkey lags
chris333333 said:
Anyone managed to download other languages keyboards in samsung keyboard because swiftkey lags
Click to expand...
Click to collapse
When I try to download other languages I get the message download failed. Probably a bug.
I hope you can port this rom for P585Y. Thank you
Tung Lam said:
I hope you can port this rom for P585Y. Thank you
Click to expand...
Click to collapse
I imagine that if you were to give the dev a P585, he might have a reason to port and a device to test it on. Otherwise, he has neither. I've seen this request many times, where someone with a different device, asks a dev to support theirs, and it never succeeds.
My personal hotspot isn't working after my first reboot... though I've uninstalled every 3rd party app.
Edit: It comes after installing Magisk.
EDIT 2: I've tried to reboot without installing any apps twice, and the problem appears, I only need hotspot for hosting an offline game with friends, like Bombsquad.
Is it debloated?
jurgenmmehja said:
Is it debloated?
Click to expand...
Click to collapse
Sort of...
This ROM needs more focus though, it's faster than the stock Oreo, but has weird bugs...
To solve that keyboard bug switch to the phone interface through build.prop editor,
Edit the line: ro.build.characteristics=tablet to phone instead of tablet.
Then add the languages you want then revert back the changes after finishing.
About that hotspot bug, I don't know, but can't we just use the stock kernel and wifi instead? What's the use of the new one?
About the Secure Folder, there's a way to set it up by modifying the kernel, and we never had it on our own device, we only got it on S7.
But there's a small question... do we have a chance to get a Samsung 64-bit ROM on our device? Because the Play Store will shut down on 32-bit devices in August 2021, though this device is 64-bit.
Is it really much faster than stock 8.1? None of the roms I've tried so far have been, the ui lags and battery takes a hit I assume as it's running harder to keep up
Bingley said:
Is it really much faster than stock 8.1? None of the roms I've tried so far have been, the ui lags and battery takes a hit I assume as it's running harder to keep up
Click to expand...
Click to collapse
That's because it's overclocked, and it generally feels way smoother like the stock Nougat ROM, there are some annoying bugs though, some camera apps can't access the camera, and the Hotspot doesn't work after installing some apps and rebooting, looks like it's not Magisk to blame, that doesn't happen in the stock though.
So I'm waiting until the OP replies or gives us an update hopefully.
I've tried the hotspot in the A600N port and it works properly! Why not here in this port? I think due to the presence of numerous Korean carrier options and maybe the Wi-Fi Sharing, when it's enabled, the hotspot doesn't work, even if disabled and rebooted. So you should remove these options, I guess?
I use SwiftKey beta as a side keyboard, testing the puppets, they are working in the stock ROM, but in both Pie ports, though I've allowed camera permission, the app can't load puppets, and that is not just present in SwiftKey, it is present also in some apps, it may be a missing Pie support, hopefully.
And thankfully, there are no camera modes, just front and back camera,
When I switch modes in this port, it force closes immediately,
and the Photo editor works properly in the A600N port, but not in this port, when I switch the filter it gives me a black screen instead
The only thing that annoys me is that the tablet interface of the A600N is not as great as this port, landscape mode is better here, because this port has tablet framework.
So, I wish this port gets more attention than it deserves, thank you Valera1978 for your great contributions! Hope you focus on this port, well more than you do with LineageOS!
Work on P580 ??
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install twrp
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
almost all
Links
[SM-T820]
5. 20200211: latest sources, February security patch: https://drive.google.com/file/d/1D8lY5z9O3oafqiWlDLvtltFDQCEHnZbN/view?usp=sharing
4. 20200113: latest sources, January security patch: https://drive.google.com/file/d/1enARwIN4oY_IrugrfncONxUGR-jbuY8s/view?usp=sharing
3. 20191224: latest sources, update kernel to 3.18.140: https://drive.google.com/file/d/1Hsl84EDxB_XQqgEPOIvyRjTdYUXuuWtR/view?usp=sharing
2. 20191013: https://drive.google.com/file/d/1z15hqXU-BL4H4MloSqukB2v1XqtUUlU2/view?usp=sharing
1. 20191010: https://drive.google.com/file/d/13gyKGE95kWFk2zbn0zW9GwiTHhyuPohr/view?usp=sharing
[SM-T825]
5. 20200211: latest sources, February security patch: https://drive.google.com/file/d/1fe4Gdlyx4U27RPJVnidhoiO1pqTp0b7I/view?usp=sharing
4. 20200113: latest sources, January security patch: https://drive.google.com/file/d/1duPl5zCv7D7xTvJjIAq6lrC7SfaWTl0c/view?usp=sharing
3. 20191224: latest sources, update kernel to 3.18.140: https://drive.google.com/file/d/1fvQMz0diPKFnzkVqMjLle74gFzn-6-Mq/view?usp=sharing
2. 20191013: https://drive.google.com/file/d/10CclbMYTINKww9dqZ_j6jKOqXcUX9s39/view?usp=sharing
1. 20191010: https://drive.google.com/file/d/1pW17U6PRt3Ptlm6WDCCbWG3HlanhaBx3/view?usp=sharing
Root
Install latest magisk (20.1+) from canary channel: https://forum.xda-developers.com/apps/magisk/dev-magisk-canary-channel-bleeding-edge-t3839337
TWRP
Use twrp from https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359
or my repack: https://drive.google.com/file/d/1KyX6xZ8WrcNyHo73-lHhU2dZjX0KFJc1/view?usp=sharing
Gapps
https://opengapps.org
Platform: ARM64
Android: 10.0
Sources
Sources: https://github.com/lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_msm8996
Device: https://github.com/Valera1978/android_device_samsung_gts3llte and https://github.com/Valera1978/android_device_samsung_gts3lwifi
Vendor: https://github.com/Valera1978/android_vendor_samsung_gts3llte and https://github.com/Valera1978/android_vendor_samsung_gts3lwifi
Thanks
Thanks to LineageOS team
Uh nice - thanks Valera! Any chance you can add your manifest? I would like to try building Android once myself.
Error flashed on screen on reboot
I am getting 'There's an internal problem with your device. Contact your manufacturer for detail.' error on every reboot. I've flashed the 'BL_T825XXU3CSH9_CL16530048_QB25611745_REV00_user_low_ship_MULTI_CERT.tar.md5' bootloader but still facing the issue.
See the screenshot for error message.
Camera is not working
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
Click to expand...
Click to collapse
Hi there,
do you have any intention to include palm rejection on Q?
It's the only missing feature on LOS...
Stogie87 said:
Hi there,
do you have any intention to include palm rejection on Q?
It's the only missing feature on LOS...
Click to expand...
Click to collapse
Do custom ROMs have to have palm rejection added? It's not normal feature?
This would be good to know as I got this device to use the pen!
I notice that screen is very hard to wake up. I have to play all buttons in random combination to be able to bring up lock screen. Once it get unlocked, everything works find.
I did once get system UI locked error. I have to push all buttons to force it reboot.
So I tested this rom on my T820 Wifi and in my opinion it works pretty stable, except of some issues I recognised:
- Saving pictures does not work. The pictures I get are scrambled.
- sd cards in ntfs format not working
- Palm rejection is not working
- ed xposed causes boot into download mode
- screen wakup is sometimes slow
- Viper4Android is not working
- Speaker only working on one site (right)
- it's not possible to rename SD Card or uninstall any system app like mail-app via root
- Netflix is not working
- Not possible to activate a custom notification sound
- Adaway only working with systemless host activated in magisk
- trying to use miracast causes a complete crash of system ui and makes a reboot necessary
- digital wellbeing randomly fc if settings menu is open
- sometimes hardware buttons stuck and i have to wait 5 sec until I can use them again
Thanks for your work!
*update: On second build same issues and camera just force close, now
did anyone figure out how to get the camera to work. It takes pictures but to view them they all look scribble.
does this rom work with the T825Y?
MR2_Wei said:
does this rom work with the T825Y?
Click to expand...
Click to collapse
Just try it. I think the specifications are the same like T825.
ghostman256 said:
did anyone figure out how to get the camera to work. It takes pictures but to view them they all look scribble.
Click to expand...
Click to collapse
Just use gcam it 'll work
alvinbw said:
Just use gcam it 'll work
Click to expand...
Click to collapse
Not working on second build for me
Now for the *REAL* question, does this ROM cause graphical glitches when you run a 3D load and heat the processor up to 100c?! That was my experience various unofficial LOS16/RR based Pie builds. I get temps in the worst case up to 97c under extreme load on the stock OneUI ROM, but normally it is way LOWER. Could someone (with the performance level in the power settings set to max) test games like https://play.google.com/store/apps/details?id=com.PnA.Offroad and some heavier ones for an extended period of time, and maybe some benchmarks (AnTuTu, 3DMark, etc...) while watching the CPU temp and General SoC temp with a temp guage overlay (like the one in the paid option on DevCheck).
Sent from my SM-G950U using Tapatalk
@Valera1978
Is there any chance, that you compile Havoc OS 3.0 for our Device?
Thanks in advance
I got it installed and booted but the rotate function isn't working, even when I open youtube and make it full screen it's doesn't rotate
MoSaMiChEs said:
I got it installed and booted but the rotate function isn't working, even when I open youtube and make it full screen it's doesn't rotate
Click to expand...
Click to collapse
Don't expect that anything on this rom will fixed soon.
Always the same with this dev. He releases a build with issues, then he ignores all issue reports and only releases sometimes a new build with security updates and nothing more. I wish a had wait a little bit and bought a tab s5e, because it seems to be the only new Samsung tab with fully working custom roms and palm rejection.
Better you use stock rom for tab s3.
w595shubham said:
I am getting 'There's an internal problem with your device. Contact your manufacturer for detail.' error on every reboot. I've flashed the 'BL_T825XXU3CSH9_CL16530048_QB25611745_REV00_user_low_ship_MULTI_CERT.tar.md5' bootloader but still facing the issue.
See the screenshot for error message.
Click to expand...
Click to collapse
same here
There is something that I cannot understand. The users say that there are problems with the ROM but OP says there aren't...
Quote:
Originally Posted by w595shubham
I am getting 'There's an internal problem with your device. Contact your manufacturer for detail.' error on every reboot. I've flashed the 'BL_T825XXU3CSH9_CL16530048_QB25611745_REV00_user_ low_ship_MULTI_CERT.tar.md5' bootloader but still facing the issue.
See the screenshot for error message.
Not sure if answered but I fixed this by:
Copying the complete line ro.vendor.build.fingerprint.................. from the /system/build.prop file.
Paste replacing the line ro.vendor.build.fingerprint.................. in the /vendor/build.prop file.
These files crosscheck each other looking for this line. The files must be from different builds.
First thing first,... I'm Just a noob here, I just did some testing things during my quarantine free time and got many errors with this Red Magic (which as far as I know has no update until now for international user). So, If there's something you guys know more than Me, or if I might do something wrong on my guide here, please correct me...
My goal was to get rid of the touchscreen bugs which still exist on International ROM (Oreo 8.1), but I still want the RGB light feature also...
Do it at your own risk!
Here you go:
ROOT for Omni 9.0 Unofficial by Vache and CN ROM 3.26 you can get it here
This root method I got it from here by member changguangyu on Red Magic 3!
Here you go :
I've tried with Fresh stock CN ROM 3.26 (update from without formating, result always failed for google apps at least for me)
install TWRP from fastboot
Download Magisk Manager (using 7.5.1 (267) when this post created)
Extract your boot.img from your Rom and save it to your download folder (i dunno - already tried to put it in another place, it gave me nothing).
Open Magisk Manager and it will say something like Magisk not Installed
Install it and select and patch the boot file you saved before.
It will create magisk_patched.img and save it to your computer.
Enable developer options > make sure to check (ON)USB debugging and OEM unlock on your device
Open command prompt on Windows: reboot to fastboot command :
Code:
adb reboot bootloader
Unlock your device
Code:
fastboot oem nubia_unlock NUBIA_NX609J
Use command :
Code:
fastboot flash boot magisk_patched.img
Reboot! and your phone should be rooted now.
Installing GAPPS on CN ROM 3.26 better, and simple method:
with this method, it was much simpler and the result is Google Play can download big files like PUBG Mobile
First, make sure your device is rooted!
Second, make sure twrp are installed (I use the one that came in the same link with omni 9.0 i think)
Third just flash GAPPS get it at Opengapps get it here . I use the pico one...
that's it! everything is smooth at least for me.
Now for a bit tricky part
Installing GApps (Google Play Services, etc) CN ROM only (I'm using 3.26).
This can be done after you root your device!
Open Magisk and go to the module, search for App Systemizer (Terminal Emulator) by Veez21 and reboot your device.
Download Google Installer (Chinese apps) (got it from this thread ) by Teeemoo
Click the blue-button and install everything until all the checklist is finished! After the install is done, don't open any google or add an account yet!.
Go to settings > App info > search for google calendar sync and everything that smells like google set every permission to yes! even storage! yes, Anything! (At first, I did not allow storage permission for play services, and it gives me an error during contact sync!) (Also you may want to check Settings > Notification Management > Playstore > make it open ).
Search for Termux (terminal emulator) on the internet, download the apk and install it. (I think I remembered it using F-Droid)
open termux use the following command :
Code:
su
then
Code:
systemize
then choose option
Code:
1
listed apps will be shown. choose Google apps at which number you want to systemize (mine started on 10 until 15) so i put
Code:
10
enter and then I make it as privilege apps or priv-apps by choosing option number
Code:
2
, and then go back to menu
Code:
y
--- Choose another google apps until it finished!
After all that, reboot!
Start by opening the play store
And Voila :fingers-crossed::good::laugh:
Tips:
Already tested it, some google features will not work nicely if it's not system apps... My solution is :
Install all google apps that i need after Play Store is installed nicely.
Example for Google Assistant (Saying "Hey Google" hot words) : Force Stop Nubia Share, Nubia Voice
Allow all permission, also go to Settings > Power Management > Application Power Management > Your Apps > Regardless of Control.
After that, Open Termux and systemize the Google Assistant.
After Reboot you will be prompted for "Okay, Google" hotword detection.
Again if someone has better tips, please post it...
I also experience some apps that don't run on the background (Whatsapp for example) - u need to run it first and don't clear from recent sometimes I guess.
I tried to download PUBG Mobile, and it says: can't update blablabla... see common ways to fix the problem (anyone knows how to resolve this issue? - (this problem only for big file i think) )
The Chinese Rom is nice, but it gave me a headache sometimes I already allow permission to some apps, when reopen, it goes back doesn't have permission again.... but after making it as a system (priv-app) from the app systemizer (from magisk and use it with Termux), all goes well.
PS: it will be great if someone can test this too, or make this ROM bloat-free! Thanks :good:
*latest update with CN ROM 3.32 = it works with this method...
UPDATE : CMIIW the 3.32 is so buggy for me, for example : we can't hear anything for ringtone after we changed the ringtone using mp3, and more bugs again... ringtone always getting silent by itself after several hour reboot, the most annoying thing is, fingerprint sometimes working sometimes not!. anyone that use 3.32 please share your experience too please...
Great work![emoji106][emoji106][emoji106]
great
I suppose first of all you have flashed custom recovery and then you tried install root
strakell said:
I suppose first of all you have flashed custom recovery and then you tried install root
Click to expand...
Click to collapse
For flashing boot.img I don't need to go to recovery... I just do it via fastboot command without entering recovery... But, it will be better if you have TWRP installed just in case.
http://ui.nubia.cn/rom/detail/53 new release 3.30 here ... anyone care to try ?
ianseer said:
http://ui.nubia.cn/rom/detail/53 new release 3.30 here ... anyone care to try ?
Click to expand...
Click to collapse
Downloading is pain from chinese website. But yeah will try today and see how it goes
it can be rooted but not android version change. Its still android 9. can be rooted but takes hell of a time to debloat the ROM. Maybe changing back to the official 8.1.
methuselah said:
it can be rooted but not android version change. Its still android 9. can be rooted but takes hell of a time to debloat the ROM. Maybe changing back to the official 8.1.
Click to expand...
Click to collapse
thanks appriciate it man... any changes for touch screen issue especially when phone is hot? and also it should be support dual window mode now (as far as i read by the google translate)
ianseer said:
thanks appriciate it man... any changes for touch screen issue especially when phone is hot? and also it should be support dual window mode now (as far as i read by the google translate)
Click to expand...
Click to collapse
this phone for me never got that much hot. It never had any touch issues. But yeah now u have latest security patch with this update. But the webview is still age old 66 something which is pain in ass. With root you can change atleast latest webview.
ROM V3.30 twrp-3.3.1-1
sorry for my english, IT WORKS, i tried the rom v3.30 and the official TWRP twrp-3.3.1-1-nx609j_SAR.img, downloaded from the official page twrp.me, just can´t hide magisk, display hide magisk failed and NETFLIX app doesn't work, your device isn't compatible, everything else is fine. about the touch bug and the heat, i don't have any problem.
TWRP release a new version Download twrp-3.4.0-0-nx609j.img, it´s available from the official page twrp me, for those who wants netflix app, use the version 4.16.1, sorry i can't publish the links
V3.31
Red Devils gaming mobile phone V3.31 (official version)
Release Date: 2020-09-22
Release Notes
system
Optimization: system stability and fluency
Fix: Incorporate Google GPU patch
game
Fix: Probabilistic black screen problem during the game
Fix: Probabilistic automatic screen lock during gameplay
other
Optimization: Fast charge animation
The optimized content of this update includes but is not limited to the items listed above
Red Devils gaming mobile phone V3.32
Software version: V3.32 (stable version)
Release Date: 2020-12-25
Version: V3.32Size: 2.34GB
MD5: 14233218463968118E9A2B8B9F82A246
Update log
Release Notes
system
Optimization: system stability and fluency
Update: Google Security Patch
Communication
New: Unicom vote function
other
Update: Phone Manager version
Update: browser version
The optimized content of this update includes but is not limited to the items listed above
http://romdownload.nubia.com/%E7%BA%A2%E9%AD%94%E7%94%B5%E7%AB%9E%E6%B8%B8%E6%88%8F%E6%89%8B%E6%9C%BA/V3.32/NX609J-update.zip
metalerock said:
http://romdownload.nubia.com/%E7%BA%A2%E9%AD%94%E7%94%B5%E7%AB%9E%E6%B8%B8%E6%88%8F%E6%89%8B%E6%9C%BA/V3.32/NX609J-update.zip
Click to expand...
Click to collapse
https://twrp.me/nx609j/twrp-3.4.0-0-nx609j.img
i have a 3.32 rom,its fantastic,but i need help to install Gapps,i have try,but nothing work,anyone can help me?i would appreciate it very much, i'm using it as second phone, and it's a bomb, but i don't want to put back the international rom, i prefer the cn, partly i solved it with huawei appgallery, but i would like the playstore..thanks
ok, i managed to put the apps, thanks to this guide, but in the playstore i still see the device not certified, how can i solve?
batocchietto_29_ said:
ok, i managed to put the apps, thanks to this guide, but in the playstore i still see the device not certified, how can i solve?
Click to expand...
Click to collapse
i think there is no way to get the device certified, because is a chinese rom, but i have no problem with that, only some apps can download from playstore as like netflix
TWRP for nx609jtwrp-3.5.1_9-0-nx609j.img
Download twrp-3.5.1_9-0-nx609j.img
Download page for twrp-3.5.1_9-0-nx609j.img
dl.twrp.me